Apply TAP_CODE_DELAY to Tap Dance key sequences (#14412)

* Add  support to tap dances

* Move default tap code defines to header file

bootloader.mk

@@ -27,8 +27,8 @@
 #     lufa-dfu     LUFA DFU
 #     qmk-dfu      QMK DFU (LUFA + blinkenlight)
 #     qmk-hid      QMK HID (LUFA + blinkenlight)
-#     bootloadHID HIDBootFlash compatible (ATmega32A)
-#     USBasp      USBaspLoader (ATmega328P)
+#     bootloadhid  HIDBootFlash compatible (ATmega32A)
+#     usbasploader USBaspLoader (ATmega328P)
 # ARM:
 #     kiibohd      Input:Club Kiibohd bootloader (only used on their boards)
 #     stm32duino   STM32Duino (STM32F103x8)
@@ -86,11 +86,11 @@ ifeq ($(strip $(BOOTLOADER)), caterina)
     OPT_DEFS += -DBOOTLOADER_CATERINA
     BOOTLOADER_SIZE = 4096
 endif
-ifeq ($(strip $(BOOTLOADER)), bootloadHID)
+ifneq (,$(filter $(BOOTLOADER), bootloadhid bootloadHID))
     OPT_DEFS += -DBOOTLOADER_BOOTLOADHID
     BOOTLOADER_SIZE = 4096
 endif
-ifeq ($(strip $(BOOTLOADER)), USBasp)
+ifneq (,$(filter $(BOOTLOADER), usbasploader USBasp))
     OPT_DEFS += -DBOOTLOADER_USBASP
     BOOTLOADER_SIZE = 4096
 endif

common_features.mk

@@ -698,19 +698,23 @@ ifeq ($(strip $(AUTO_SHIFT_ENABLE)), yes)
 endif
 
 JOYSTICK_ENABLE ?= no
-ifneq ($(strip $(JOYSTICK_ENABLE)), no)
+VALID_JOYSTICK_TYPES := analog digital
+JOYSTICK_DRIVER ?= analog
+ifeq ($(strip $(JOYSTICK_ENABLE)), yes)
+    ifeq ($(filter $(JOYSTICK_DRIVER),$(VALID_JOYSTICK_TYPES)),)
+        $(error "$(JOYSTICK_DRIVER)" is not a valid joystick driver)
+    endif
     OPT_DEFS += -DJOYSTICK_ENABLE
     SRC += $(QUANTUM_DIR)/process_keycode/process_joystick.c
     SRC += $(QUANTUM_DIR)/joystick.c
-endif
 
-ifeq ($(strip $(JOYSTICK_ENABLE)), analog)
+    ifeq ($(strip $(JOYSTICK_DRIVER)), analog)
         OPT_DEFS += -DANALOG_JOYSTICK_ENABLE
         SRC += analog.c
-endif
-
-ifeq ($(strip $(JOYSTICK_ENABLE)), digital)
+    endif
+    ifeq ($(strip $(JOYSTICK_DRIVER)), digital)
         OPT_DEFS += -DDIGITAL_JOYSTICK_ENABLE
+    endif
 endif
 
 DIGITIZER_ENABLE ?= no

data/schemas/keyboard.jsonschema

@@ -56,7 +56,7 @@
         },
         "bootloader": {
             "type": "string",
-            "enum": ["atmel-dfu", "bootloadHID", "caterina", "halfkay", "kiibohd", "lufa-dfu", "lufa-ms", "micronucleus", "qmk-dfu", "qmk-hid", "stm32-dfu", "stm32duino", "unknown", "USBasp", "tinyuf2"],
+            "enum": ["atmel-dfu", "bootloadhid", "bootloadHID", "caterina", "halfkay", "kiibohd", "lufa-dfu", "lufa-ms", "micronucleus", "qmk-dfu", "qmk-hid", "stm32-dfu", "stm32duino", "unknown", "usbasploader", "USBasp", "tinyuf2"],
         },
         "bootloader_instructions": {
             "type": "string",
@@ -118,7 +118,6 @@
                     "c_macro": {
                         "type": "boolean"
                     },
-                    "key_count": {"$ref": "qmk.definitions.v1#/key_unit"},
                     "layout": {
                         "type": "array",
                         "items": {
@@ -136,7 +135,6 @@
                                         "multipleOf": 1
                                     }
                                 },
-                                "key_count": {"$ref": "qmk.definitions.v1#/key_unit"},
                                 "r": {"$ref": "qmk.definitions.v1#/unsigned_decimal"},
                                 "rx": {"$ref": "qmk.definitions.v1#/unsigned_decimal"},
                                 "ry": {"$ref": "qmk.definitions.v1#/unsigned_decimal"},

data/templates/avr/rules.mk

@@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output

data/templates/base/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "%KEYBOARD%",
     "url": "",
     "maintainer": "%YOUR_NAME%",
-    "width": 3,
-    "height": 2,
     "layouts": {
         "LAYOUT": {
             "layout": [

data/templates/ps2avrgb/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # Build Options
 #   change yes to no to disable

docs/config_options.md

@@ -397,8 +397,8 @@ However, this will automatically disable the legacy TMK Macros and Functions fea
   * `qmk-dfu`
   * `halfkay`
   * `caterina`
-  * `bootloadHID`
-  * `USBasp`
+  * `bootloadhid`
+  * `usbasploader`
 
 ## Feature Options :id=feature-options
 

docs/driver_installation_zadig.md

@@ -69,7 +69,7 @@ This is a list of known bootloader devices and their USB vendor and product IDs,
 The device name here is the name that appears in Zadig, and may not be what the Device Manager or QMK Toolbox displays.
 
 |Bootloader    |Device Name                   |VID/PID       |Driver |
-|-------------|------------------------------|--------------|-------|
+|--------------|------------------------------|--------------|-------|
 |`atmel-dfu`   |ATmega16u2 DFU                |`03EB:2FEF`   |libusb0|
 |`atmel-dfu`   |ATmega32U2 DFU                |`03EB:2FF0`   |libusb0|
 |`atmel-dfu`   |ATm16U4 DFU V1.0.2            |`03EB:2FF3`   |libusb0|
@@ -89,8 +89,8 @@ The device name here is the name that appears in Zadig, and may not be what the
 |`caterina`    |Adafruit ItsyBitsy 32u4 5V    |`239A:000E`   |usbser |
 |`caterina`    |Arduino Leonardo              |`2A03:0036`   |usbser |
 |`caterina`    |Arduino Micro                 |`2A03:0037`   |usbser |
-|`bootloadHID`|HIDBoot                       |`16C0:05DF`   |HidUsb |
-|`USBasp`     |USBasp                        |`16C0:05DC`   |libusbK|
+|`bootloadhid` |HIDBoot                       |`16C0:05DF`   |HidUsb |
+|`usbasploader`|USBasp                        |`16C0:05DC`   |libusbK|
 |`apm32-dfu`   |APM32 DFU ISP Mode            |`314B:0106`   |WinUSB |
 |`stm32-dfu`   |STM32 BOOTLOADER              |`0483:DF11`   |WinUSB |
 |`kiibohd`     |Kiibohd DFU Bootloader        |`1C11:B007`   |WinUSB |

docs/faq_keymap.md

@@ -5,7 +5,7 @@ This page covers questions people often have about keymaps. If you haven't you s
 ## What Keycodes Can I Use?
 See [Keycodes](keycodes.md) for an index of keycodes available to you. These link to more extensive documentation when available.
 
-Keycodes are actually defined in [common/keycode.h](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/keycode.h).
+Keycodes are actually defined in [quantum/keycode.h](https://github.com/qmk/qmk_firmware/blob/master/quantum/keycode.h).
 
 ## What Are the Default Keycodes?
 

docs/feature_joystick.md

@@ -2,8 +2,6 @@
 
 The keyboard can be made to be recognized as a joystick HID device by the operating system.
 
-This is enabled by adding `JOYSTICK_ENABLE` to `rules.mk`. You can set this value to `analog`, `digital`, or `no`.
-
 !> Joystick support is not currently available on V-USB devices.
 
 The joystick feature provides two services:
@@ -18,7 +16,8 @@ or send gamepad reports based on values computed by the keyboard.
 To use analog input you must first enable it in `rules.mk`:
 
 ```makefile
-JOYSTICK_ENABLE = analog
+JOYSTICK_ENABLE = yes
+JOYSTICK_DRIVER = analog # or 'digital'
 ```
 
 An analog device such as a potentiometer found on a gamepad's analog axes is based on a [voltage divider](https://en.wikipedia.org/wiki/Voltage_divider).

docs/feature_key_overrides.md

@@ -103,7 +103,7 @@ const key_override_t **key_overrides = (const key_override_t *[]){
 ```
 
 ### Flexible macOS-friendly Grave Escape
-The [Grave Escape feature](https://docs.qmk.fm/using-qmk/advanced-keycodes/feature_grave_esc) is limited in its configurability and has [bugs when used on macOS](https://docs.qmk.fm/using-qmk/advanced-keycodes/feature_grave_esc#caveats). Key overrides can be used to achieve a similar functionality as Grave Escape, but with more customization and without bugs on macOS.
+The [Grave Escape feature](feature_grave_esc.md) is limited in its configurability and has [bugs when used on macOS](feature_grave_esc.md#caveats). Key overrides can be used to achieve a similar functionality as Grave Escape, but with more customization and without bugs on macOS.
 
 ```c
 // Shift + esc = ~

docs/feature_led_matrix.md

@@ -164,26 +164,26 @@ You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `con
 
 |Define                                                 |Description                                    |
 |-------------------------------------------------------|-----------------------------------------------|
-|`#define ENABLE_LED_MATRIX_ALPHAS_MODS`                |Enables `LED_MATRIX_ALPHAS_MODS`              |
-|`#define ENABLE_LED_MATRIX_BREATHING`                  |Enables `LED_MATRIX_BREATHING`                |
-|`#define ENABLE_LED_MATRIX_BAND`                       |Enables `LED_MATRIX_BAND`                     |
-|`#define ENABLE_LED_MATRIX_BAND_PINWHEEL`              |Enables `LED_MATRIX_BAND_PINWHEEL`            |
-|`#define ENABLE_LED_MATRIX_BAND_SPIRAL`                |Enables `LED_MATRIX_BAND_SPIRAL`              |
-|`#define ENABLE_LED_MATRIX_CYCLE_LEFT_RIGHT`           |Enables `LED_MATRIX_CYCLE_LEFT_RIGHT`         |
-|`#define ENABLE_LED_MATRIX_CYCLE_UP_DOWN`              |Enables `LED_MATRIX_CYCLE_UP_DOWN`            |
-|`#define ENABLE_LED_MATRIX_CYCLE_OUT_IN`               |Enables `LED_MATRIX_CYCLE_OUT_IN`             |
-|`#define ENABLE_LED_MATRIX_DUAL_BEACON`                |Enables `LED_MATRIX_DUAL_BEACON`              |
-|`#define ENABLE_LED_MATRIX_SOLID_REACTIVE_SIMPLE`      |Enables `LED_MATRIX_SOLID_REACTIVE_SIMPLE`    |
-|`#define ENABLE_LED_MATRIX_SOLID_REACTIVE_WIDE`        |Enables `LED_MATRIX_SOLID_REACTIVE_WIDE`      |
-|`#define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTIWIDE`   |Enables `LED_MATRIX_SOLID_REACTIVE_MULTIWIDE` |
-|`#define ENABLE_LED_MATRIX_SOLID_REACTIVE_CROSS`       |Enables `LED_MATRIX_SOLID_REACTIVE_CROSS`     |
-|`#define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTICROSS`  |Enables `LED_MATRIX_SOLID_REACTIVE_MULTICROSS`|
-|`#define ENABLE_LED_MATRIX_SOLID_REACTIVE_NEXUS`       |Enables `LED_MATRIX_SOLID_REACTIVE_NEXUS`     |
-|`#define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTINEXUS`  |Enables `LED_MATRIX_SOLID_REACTIVE_MULTINEXUS`|
-|`#define ENABLE_LED_MATRIX_SOLID_SPLASH`               |Enables `LED_MATRIX_SOLID_SPLASH`             |
-|`#define ENABLE_LED_MATRIX_SOLID_MULTISPLASH`          |Enables `LED_MATRIX_SOLID_MULTISPLASH`        |
-|`#define ENABLE_LED_MATRIX_WAVE_LEFT_RIGHT`            |Enables `LED_MATRIX_WAVE_LEFT_RIGHT`          |
-|`#define ENABLE_LED_MATRIX_WAVE_UP_DOWN`               |Enables `LED_MATRIX_WAVE_UP_DOWN`             |
+|`#define DISABLE_LED_MATRIX_ALPHAS_MODS`               |Disables `LED_MATRIX_ALPHAS_MODS`              |
+|`#define DISABLE_LED_MATRIX_BREATHING`                 |Disables `LED_MATRIX_BREATHING`                |
+|`#define DISABLE_LED_MATRIX_BAND`                      |Disables `LED_MATRIX_BAND`                     |
+|`#define DISABLE_LED_MATRIX_BAND_PINWHEEL`             |Disables `LED_MATRIX_BAND_PINWHEEL`            |
+|`#define DISABLE_LED_MATRIX_BAND_SPIRAL`               |Disables `LED_MATRIX_BAND_SPIRAL`              |
+|`#define DISABLE_LED_MATRIX_CYCLE_LEFT_RIGHT`          |Disables `LED_MATRIX_CYCLE_LEFT_RIGHT`         |
+|`#define DISABLE_LED_MATRIX_CYCLE_UP_DOWN`             |Disables `LED_MATRIX_CYCLE_UP_DOWN`            |
+|`#define DISABLE_LED_MATRIX_CYCLE_OUT_IN`              |Disables `LED_MATRIX_CYCLE_OUT_IN`             |
+|`#define DISABLE_LED_MATRIX_DUAL_BEACON`               |Disables `LED_MATRIX_DUAL_BEACON`              |
+|`#define DISABLE_LED_MATRIX_SOLID_REACTIVE_SIMPLE`     |Disables `LED_MATRIX_SOLID_REACTIVE_SIMPLE`    |
+|`#define DISABLE_LED_MATRIX_SOLID_REACTIVE_WIDE`       |Disables `LED_MATRIX_SOLID_REACTIVE_WIDE`      |
+|`#define DISABLE_LED_MATRIX_SOLID_REACTIVE_MULTIWIDE`  |Disables `LED_MATRIX_SOLID_REACTIVE_MULTIWIDE` |
+|`#define DISABLE_LED_MATRIX_SOLID_REACTIVE_CROSS`      |Disables `LED_MATRIX_SOLID_REACTIVE_CROSS`     |
+|`#define DISABLE_LED_MATRIX_SOLID_REACTIVE_MULTICROSS` |Disables `LED_MATRIX_SOLID_REACTIVE_MULTICROSS`|
+|`#define DISABLE_LED_MATRIX_SOLID_REACTIVE_NEXUS`      |Disables `LED_MATRIX_SOLID_REACTIVE_NEXUS`     |
+|`#define DISABLE_LED_MATRIX_SOLID_REACTIVE_MULTINEXUS` |Disables `LED_MATRIX_SOLID_REACTIVE_MULTINEXUS`|
+|`#define DISABLE_LED_MATRIX_SOLID_SPLASH`              |Disables `LED_MATRIX_SOLID_SPLASH`             |
+|`#define DISABLE_LED_MATRIX_SOLID_MULTISPLASH`         |Disables `LED_MATRIX_SOLID_MULTISPLASH`        |
+|`#define DISABLE_LED_MATRIX_WAVE_LEFT_RIGHT`           |Disables `LED_MATRIX_WAVE_LEFT_RIGHT`          |
+|`#define DISABLE_LED_MATRIX_WAVE_UP_DOWN`              |Disables `LED_MATRIX_WAVE_UP_DOWN`             |
 
 ## Custom LED Matrix Effects :id=custom-led-matrix-effects
 

docs/feature_oled_driver.md

@@ -356,6 +356,10 @@ bool oled_scroll_left(void);
 // Returns true if the screen was not scrolling or stops scrolling
 bool oled_scroll_off(void);
 
+// Returns true if the oled is currently scrolling, false if it is
+// not
+bool is_oled_scrolling(void);
+
 // Inverts the display
 // Returns true if the screen was or is inverted
 bool oled_invert(bool invert);

docs/feature_rgb_matrix.md

@@ -448,46 +448,46 @@ You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `con
 
 |Define                                                 |Description                                    |
 |-------------------------------------------------------|-----------------------------------------------|
-|`#define ENABLE_RGB_MATRIX_ALPHAS_MODS`               |Enables `RGB_MATRIX_ALPHAS_MODS`              |
-|`#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN`          |Enables `RGB_MATRIX_GRADIENT_UP_DOWN`         |
-|`#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT`       |Enables `MATRIX_GRADIENT_LEFT_RIGHT`          |
-|`#define ENABLE_RGB_MATRIX_BREATHING`                 |Enables `RGB_MATRIX_BREATHING`                |
-|`#define ENABLE_RGB_MATRIX_BAND_SAT`                  |Enables `RGB_MATRIX_BAND_SAT`                 |
-|`#define ENABLE_RGB_MATRIX_BAND_VAL`                  |Enables `RGB_MATRIX_BAND_VAL`                 |
-|`#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT`         |Enables `RGB_MATRIX_BAND_PINWHEEL_SAT`        |
-|`#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL`         |Enables `RGB_MATRIX_BAND_PINWHEEL_VAL`        |
-|`#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT`           |Enables `RGB_MATRIX_BAND_SPIRAL_SAT`          |
-|`#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL`           |Enables `RGB_MATRIX_BAND_SPIRAL_VAL`          |
-|`#define ENABLE_RGB_MATRIX_CYCLE_ALL`                 |Enables `RGB_MATRIX_CYCLE_ALL`                |
-|`#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT`          |Enables `RGB_MATRIX_CYCLE_LEFT_RIGHT`         |
-|`#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN`             |Enables `RGB_MATRIX_CYCLE_UP_DOWN`            |
-|`#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON`    |Enables `RGB_MATRIX_RAINBOW_MOVING_CHEVRON`   |
-|`#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN`              |Enables `RGB_MATRIX_CYCLE_OUT_IN`             |
-|`#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL`         |Enables `RGB_MATRIX_CYCLE_OUT_IN_DUAL`        |
-|`#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL`            |Enables `RGB_MATRIX_CYCLE_PINWHEEL`           |
-|`#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL`              |Enables `RGB_MATRIX_CYCLE_SPIRAL`             |
-|`#define ENABLE_RGB_MATRIX_DUAL_BEACON`               |Enables `RGB_MATRIX_DUAL_BEACON`              |
-|`#define ENABLE_RGB_MATRIX_RAINBOW_BEACON`            |Enables `RGB_MATRIX_RAINBOW_BEACON`           |
-|`#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS`         |Enables `RGB_MATRIX_RAINBOW_PINWHEELS`        |
-|`#define ENABLE_RGB_MATRIX_RAINDROPS`                 |Enables `RGB_MATRIX_RAINDROPS`                |
-|`#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS`       |Enables `RGB_MATRIX_JELLYBEAN_RAINDROPS`      |
-|`#define ENABLE_RGB_MATRIX_HUE_BREATHING`             |Enables `RGB_MATRIX_HUE_BREATHING`            |
-|`#define ENABLE_RGB_MATRIX_HUE_PENDULUM`              |Enables `RGB_MATRIX_HUE_PENDULUM`             |
-|`#define ENABLE_RGB_MATRIX_HUE_WAVE `                 |Enables `RGB_MATRIX_HUE_WAVE `                |
-|`#define ENABLE_RGB_MATRIX_TYPING_HEATMAP`            |Enables `RGB_MATRIX_TYPING_HEATMAP`           |
-|`#define ENABLE_RGB_MATRIX_DIGITAL_RAIN`              |Enables `RGB_MATRIX_DIGITAL_RAIN`             |
-|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE`     |Enables `RGB_MATRIX_SOLID_REACTIVE_SIMPLE`    |
-|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE`            |Enables `RGB_MATRIX_SOLID_REACTIVE`           |
-|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE`       |Enables `RGB_MATRIX_SOLID_REACTIVE_WIDE`      |
-|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE`  |Enables `RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE` |
-|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS`      |Enables `RGB_MATRIX_SOLID_REACTIVE_CROSS`     |
-|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS` |Enables `RGB_MATRIX_SOLID_REACTIVE_MULTICROSS`|
-|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS`      |Enables `RGB_MATRIX_SOLID_REACTIVE_NEXUS`     |
-|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS` |Enables `RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS`|
-|`#define ENABLE_RGB_MATRIX_SPLASH`                    |Enables `RGB_MATRIX_SPLASH`                   |
-|`#define ENABLE_RGB_MATRIX_MULTISPLASH`               |Enables `RGB_MATRIX_MULTISPLASH`              |
-|`#define ENABLE_RGB_MATRIX_SOLID_SPLASH`              |Enables `RGB_MATRIX_SOLID_SPLASH`             |
-|`#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH`         |Enables `RGB_MATRIX_SOLID_MULTISPLASH`        |
+|`#define DISABLE_RGB_MATRIX_ALPHAS_MODS`               |Disables `RGB_MATRIX_ALPHAS_MODS`              |
+|`#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN`          |Disables `RGB_MATRIX_GRADIENT_UP_DOWN`         |
+|`#define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT`       |Disables `MATRIX_GRADIENT_LEFT_RIGHT`          |
+|`#define DISABLE_RGB_MATRIX_BREATHING`                 |Disables `RGB_MATRIX_BREATHING`                |
+|`#define DISABLE_RGB_MATRIX_BAND_SAT`                  |Disables `RGB_MATRIX_BAND_SAT`                 |
+|`#define DISABLE_RGB_MATRIX_BAND_VAL`                  |Disables `RGB_MATRIX_BAND_VAL`                 |
+|`#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT`         |Disables `RGB_MATRIX_BAND_PINWHEEL_SAT`        |
+|`#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL`         |Disables `RGB_MATRIX_BAND_PINWHEEL_VAL`        |
+|`#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT`           |Disables `RGB_MATRIX_BAND_SPIRAL_SAT`          |
+|`#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL`           |Disables `RGB_MATRIX_BAND_SPIRAL_VAL`          |
+|`#define DISABLE_RGB_MATRIX_CYCLE_ALL`                 |Disables `RGB_MATRIX_CYCLE_ALL`                |
+|`#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT`          |Disables `RGB_MATRIX_CYCLE_LEFT_RIGHT`         |
+|`#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN`             |Disables `RGB_MATRIX_CYCLE_UP_DOWN`            |
+|`#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON`    |Disables `RGB_MATRIX_RAINBOW_MOVING_CHEVRON`   |
+|`#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN`              |Disables `RGB_MATRIX_CYCLE_OUT_IN`             |
+|`#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL`         |Disables `RGB_MATRIX_CYCLE_OUT_IN_DUAL`        |
+|`#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL`            |Disables `RGB_MATRIX_CYCLE_PINWHEEL`           |
+|`#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL`              |Disables `RGB_MATRIX_CYCLE_SPIRAL`             |
+|`#define DISABLE_RGB_MATRIX_DUAL_BEACON`               |Disables `RGB_MATRIX_DUAL_BEACON`              |
+|`#define DISABLE_RGB_MATRIX_RAINBOW_BEACON`            |Disables `RGB_MATRIX_RAINBOW_BEACON`           |
+|`#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS`         |Disables `RGB_MATRIX_RAINBOW_PINWHEELS`        |
+|`#define DISABLE_RGB_MATRIX_RAINDROPS`                 |Disables `RGB_MATRIX_RAINDROPS`                |
+|`#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS`       |Disables `RGB_MATRIX_JELLYBEAN_RAINDROPS`      |
+|`#define DISABLE_RGB_MATRIX_HUE_BREATHING`             |Disables `RGB_MATRIX_HUE_BREATHING`            |
+|`#define DISABLE_RGB_MATRIX_HUE_PENDULUM`              |Disables `RGB_MATRIX_HUE_PENDULUM`             |
+|`#define DISABLE_RGB_MATRIX_HUE_WAVE `                 |Disables `RGB_MATRIX_HUE_WAVE `                |
+|`#define DISABLE_RGB_MATRIX_TYPING_HEATMAP`            |Disables `RGB_MATRIX_TYPING_HEATMAP`           |
+|`#define DISABLE_RGB_MATRIX_DIGITAL_RAIN`              |Disables `RGB_MATRIX_DIGITAL_RAIN`             |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE`     |Disables `RGB_MATRIX_SOLID_REACTIVE_SIMPLE`    |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE`            |Disables `RGB_MATRIX_SOLID_REACTIVE`           |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE`       |Disables `RGB_MATRIX_SOLID_REACTIVE_WIDE`      |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE`  |Disables `RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE` |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS`      |Disables `RGB_MATRIX_SOLID_REACTIVE_CROSS`     |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS` |Disables `RGB_MATRIX_SOLID_REACTIVE_MULTICROSS`|
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS`      |Disables `RGB_MATRIX_SOLID_REACTIVE_NEXUS`     |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS` |Disables `RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS`|
+|`#define DISABLE_RGB_MATRIX_SPLASH`                    |Disables `RGB_MATRIX_SPLASH`                   |
+|`#define DISABLE_RGB_MATRIX_MULTISPLASH`               |Disables `RGB_MATRIX_MULTISPLASH`              |
+|`#define DISABLE_RGB_MATRIX_SOLID_SPLASH`              |Disables `RGB_MATRIX_SOLID_SPLASH`             |
+|`#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH`         |Disables `RGB_MATRIX_SOLID_MULTISPLASH`        |
 
 ### RGB Matrix Effect Typing Heatmap :id=rgb-matrix-effect-typing-heatmap
 

docs/feature_velocikey.md

@@ -13,7 +13,7 @@ EXTRAKEY_ENABLE = yes
 VELOCIKEY_ENABLE = yes
 ```
 
-Then, while using your keyboard, you need to also turn it on with the VLK_TOG keycode, which toggles the feature on and off.
+Then, while using your keyboard, you need to also turn it on with the `VLK_TOG` keycode, which toggles the feature on and off.
 
 The following light effects will all be controlled by Velocikey when it is enabled:
  - RGB Breathing

docs/flashing.md

@@ -127,7 +127,7 @@ To ensure compatibility with the USBasploader bootloader, make sure this block i
 
 ```make
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 ```
 
 Compatible flashers:
@@ -153,13 +153,13 @@ To ensure compatibility with the bootloadHID bootloader, make sure this block is
 
 ```make
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 ```
 
 Compatible flashers:
 
 * [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) (recommended GUI)
-* [bootloadHID CLI](https://www.obdev.at/products/vusb/bootloadhid.html) / `:bootloadHID` target in QMK (recommended command line)
+* [bootloadHID CLI](https://www.obdev.at/products/vusb/bootloadhid.html) / `:bootloadhid` target in QMK (recommended command line)
 * [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash)
 
 Flashing sequence:

docs/flashing_bootloadhid.md

@@ -15,9 +15,9 @@ General flashing sequence:
 
 ?> Using the QMK installation script, detailed [here](newbs_getting_started.md), the required bootloadHID tools should be automatically installed.
 
-To flash via the command line, use the target `:bootloadHID` by executing the following command:
+To flash via the command line, use the target `:bootloadhid` by executing the following command:
 
-    make <keyboard>:<keymap>:bootloadHID
+    make <keyboard>:<keymap>:bootloadhid
 
 ## GUI Flashing
 

docs/getting_started_make_guide.md

@@ -14,7 +14,7 @@ The full syntax of the `make` command is `<keyboard_folder>:<keymap>:<target>`,
 The `<target>` means the following
 * If no target is given, then it's the same as `all` below
 * `all` compiles as many keyboard/revision/keymap combinations as specified. For example, `make planck/rev4:default` will generate a single .hex, while `make planck/rev4:all` will generate a hex for every keymap available to the planck.
-* `flash`, `dfu`, `teensy`, `avrdude`, `dfu-util`, or `bootloadHID` compile and upload the firmware to the keyboard. If the compilation fails, then nothing will be uploaded. The programmer to use depends on the keyboard. For most keyboards it's `dfu`, but for ChibiOS keyboards you should use `dfu-util`, and `teensy` for standard Teensys. To find out which command you should use for your keyboard, check the keyboard specific readme. 
+* `flash`, `dfu`, `teensy`, `avrdude`, `dfu-util`, or `bootloadhid` compile and upload the firmware to the keyboard. If the compilation fails, then nothing will be uploaded. The programmer to use depends on the keyboard. For most keyboards it's `dfu`, but for ChibiOS keyboards you should use `dfu-util`, and `teensy` for standard Teensys. To find out which command you should use for your keyboard, check the keyboard specific readme. 
   Visit the [Flashing Firmware](flashing.md) guide for more details of the available bootloaders.
   * **Note**: some operating systems need privileged access for these commands to work. This means that you may need to setup [`udev rules`](faq_build.md#linux-udev-rules) to access these without root access, or to run the command with root access (`sudo make planck/rev4:default:flash`).
 * `clean`, cleans the build output folders to make sure that everything is built from scratch. Run this before normal compilation if you have some unexplainable problems.

docs/ja/compatible_microcontrollers.md

@@ -1,8 +1,8 @@
 # 互換性のあるマイクロコントローラ
 
 <!---
-  original document: 0.9.19:docs/compatible_microcontrollers.md
-  git diff 0.9.19 HEAD -- docs/compatible_microcontrollers.md | cat
+  original document: 0.14.14:docs/compatible_microcontrollers.md
+  git diff 0.14.14 HEAD -- docs/compatible_microcontrollers.md | cat
 -->
 
 QMK は十分な容量のフラッシュメモリを備えた USB 対応 AVR または ARM マイクロコントローラで実行されます - 一般的に 32kB 以上ですが、ほとんどの機能を無効にすると*ほんの* 16kB に詰め込むことができます。

docs/ja/reference_info_json.md

@@ -25,14 +25,8 @@
 
 ### レイアウトの形式
 
-`info.json` ファイル内の辞書の `layouts` 部分は、幾つかの入れ子になった辞書を含みます。外側のレイヤーは QMK レイアウトマクロで構成されます。例えば、`LAYOUT_ansi` あるいは `LAYOUT_iso`。各レイアウトマクロ内には、`width`、 `height`、`key_count` のキーがあります。これらは自明でなければなりません。
+`info.json` ファイル内の辞書の `layouts` 部分は、幾つかの入れ子になった辞書を含みます。外側のレイヤーは QMK レイアウトマクロで構成されます。例えば、`LAYOUT_ansi` あるいは `LAYOUT_iso`。
 
-* `width`
-   * オプション: キー単位でのレイアウトの幅
-* `height`
-   * オプション: キー単位でのレイアウトの高さ
-* `key_count`
-   * オプション: このレイアウトのキーの数
 * `layout`
    * 物理レイアウトを説明するキー辞書のリスト。詳細は次のセクションを見てください。
 

docs/reference_glossary.md

@@ -130,7 +130,7 @@ A 1 byte number that is sent as part of a HID report over USB that represents a
 ## Space Cadet Shift
 A special set of shift keys which allow you to type various types of braces by tapping the left or right shift one or more times.
 
-* [Space Cadet Shift Documentation](feature_space_cadet_shift.md)
+* [Space Cadet Shift Documentation](feature_space_cadet.md)
 
 ## Tap
 Pressing and releasing a key. In some situations you will need to distinguish between a key down and a key up event, and Tap always refers to both at once.

docs/reference_info_json.md

@@ -32,14 +32,8 @@ The `info.json` file is a JSON formatted dictionary with the following keys avai
 
 ### Layout Format
 
-Within our `info.json` file the `layouts` portion of the dictionary contains several nested dictionaries. The outer layer consists of QMK layout macros, for example `LAYOUT_ansi` or `LAYOUT_iso`. Within each layout macro are keys for `width`, `height`, and `key_count`, each of which should be self-explanatory.
+Within our `info.json` file the `layouts` portion of the dictionary contains several nested dictionaries. The outer layer consists of QMK layout macros, for example `LAYOUT_ansi` or `LAYOUT_iso`.
 
-* `width`
-  * Optional: The width of the layout in Key Units
-* `height`
-  * Optional: The height of the layout in Key Units
-* `key_count`
-  * Optional: The number of keys in this layout
 * `layout`
   * A list of Key Dictionaries describing the physical layout. See the next section for more details.
 

drivers/oled/oled_driver.h

@@ -313,6 +313,10 @@ bool oled_scroll_left(void);
 // Returns true if the screen was not scrolling or stops scrolling
 bool oled_scroll_off(void);
 
+// Returns true if the oled is currently scrolling, false if it is
+// not
+bool is_oled_scrolling(void);
+
 // Inverts the display
 // Returns true if the screen was or is inverted
 bool oled_invert(bool invert);

drivers/oled/ssd1306_sh1106.c

@@ -692,6 +692,8 @@ bool oled_scroll_off(void) {
     return !oled_scrolling;
 }
 
+bool is_oled_scrolling(void) { return oled_scrolling; }
+
 bool oled_invert(bool invert) {
     if (!oled_initialized) {
         return oled_inverted;

keyboards/0_sixty/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "0-Sixty",
     "url": "",
     "maintainer": "vinamarora8",
-    "width": 12,
-    "height": 5,
     "layouts": {
 	"LAYOUT_1x2uC": {
             "layout": [

keyboards/0_sixty/rules.mk

@@ -17,5 +17,4 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output

keyboards/0xc7/61key/61key.c

@@ -0,0 +1,17 @@
+/* Copyright 2021 0xC7
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "61key.h"

keyboards/0xc7/61key/61key.h

@@ -0,0 +1,43 @@
+/* Copyright 2021 0xC7
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If KC_NOt, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define ___ KC_NO
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A,           K3D, \
+    K40, K41, K42,           K45,           K48, K49,      K4B,      K4D  \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, ___, K2D }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, ___, ___, K3D }, \
+    { K40, K41, K42, ___, ___, K45, ___, ___, K48, K49, ___, K4B, ___, K4D }  \
+}

keyboards/0xc7/61key/config.h

@@ -0,0 +1,152 @@
+/*
+Copyright 2021 0xC7
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0xE117
+#define PRODUCT_ID   0x6161
+#define DEVICE_VER   0x0001
+#define MANUFACTURER 0xC7
+#define PRODUCT      61Key
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7 }
+#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, F7, F6, F5, F4, F1, F0 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
+
+//#define LED_NUM_LOCK_PIN B0
+//#define LED_CAPS_LOCK_PIN B1
+//#define LED_SCROLL_LOCK_PIN B2
+//#define LED_COMPOSE_PIN B3
+//#define LED_KANA_PIN B4
+
+//#define BACKLIGHT_PIN B7
+//#define BACKLIGHT_LEVELS 3
+//#define BACKLIGHT_BREATHING
+
+//#define RGB_DI_PIN E2
+//#ifdef RGB_DI_PIN
+//#    define RGBLED_NUM 16
+//#    define RGBLIGHT_HUE_STEP 8
+//#    define RGBLIGHT_SAT_STEP 8
+//#    define RGBLIGHT_VAL_STEP 8
+//#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+//#    define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+//#    define RGBLIGHT_EFFECT_BREATHING
+//#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//#    define RGBLIGHT_EFFECT_SNAKE
+//#    define RGBLIGHT_EFFECT_KNIGHT
+//#    define RGBLIGHT_EFFECT_CHRISTMAS
+//#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//#    define RGBLIGHT_EFFECT_RGB_TEST
+//#    define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+/*==== use exp() and sin() ====*/
+//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+//#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0

keyboards/0xc7/61key/info.json

@@ -0,0 +1,76 @@
+{
+    "keyboard_name": "61Key",
+    "url": "",
+    "maintainer": "0xC7",
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"x": 0, "y": 0},
+                {"x": 1, "y": 0},
+                {"x": 2, "y": 0},
+                {"x": 3, "y": 0},
+                {"x": 4, "y": 0},
+                {"x": 5, "y": 0},
+                {"x": 6, "y": 0},
+                {"x": 7, "y": 0},
+                {"x": 8, "y": 0},
+                {"x": 9, "y": 0},
+                {"x": 10, "y": 0},
+                {"x": 11, "y": 0},
+                {"x": 12, "y": 0},
+                {"x": 13, "y": 0},
+
+                {"x": 0, "y": 1, "w": 1.5},
+                {"x": 1.5, "y": 1},
+                {"x": 2.5, "y": 1},
+                {"x": 3.5, "y": 1},
+                {"x": 4.5, "y": 1},
+                {"x": 5.5, "y": 1},
+                {"x": 6.5, "y": 1},
+                {"x": 7.5, "y": 1},
+                {"x": 8.5, "y": 1},
+                {"x": 9.5, "y": 1},
+                {"x": 10.5, "y": 1},
+                {"x": 11.5, "y": 1},
+                {"x": 12.5, "y": 1},
+                {"x": 13.5, "y": 1, "w": 1.5},
+
+                {"x": 0, "y": 2, "w": 1.75},
+                {"x": 1.75, "y": 2},
+                {"x": 2.75, "y": 2},
+                {"x": 3.75, "y": 2},
+                {"x": 4.75, "y": 2},
+                {"x": 5.75, "y": 2},
+                {"x": 6.75, "y": 2},
+                {"x": 7.75, "y": 2},
+                {"x": 8.75, "y": 2},
+                {"x": 9.75, "y": 2},
+                {"x": 10.75, "y": 2},
+                {"x": 11.75, "y": 2},
+                {"x": 12.75, "y": 2, "w": 1.25},
+
+                {"x": 0, "y": 3, "w": 1.25},
+                {"x": 1.25, "y": 3},
+                {"x": 2.25, "y": 3},
+                {"x": 3.25, "y": 3},
+                {"x": 4.25, "y": 3},
+                {"x": 5.25, "y": 3},
+                {"x": 6.25, "y": 3},
+                {"x": 7.25, "y": 3},
+                {"x": 8.25, "y": 3},
+                {"x": 9.25, "y": 3},
+                {"x": 10.25, "y": 3},
+                {"x": 11.25, "y": 3, "w": 1.75},
+
+                {"x": 0, "y": 4, "w": 1.25},
+                {"x": 1.25, "y": 4, "w": 1.25},
+                {"x": 2.5, "y": 4, "w": 1.25},
+                {"x": 3.75, "y": 4, "w": 6.25},
+                {"x": 10, "y": 4, "w": 1.25},
+                {"x": 11.25, "y": 4, "w": 1.25},
+                {"x": 12.5, "y": 4, "w": 1.25},
+                {"x": 13.75, "y": 4, "w": 1.25}
+            ]
+        }
+    }
+}

keyboards/0xc7/61key/keymaps/default/keymap.c

@@ -0,0 +1,34 @@
+/* Copyright 2021 0xC7
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
+        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+        KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
+        KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_APP, KC_RCTL
+    ),
+    [1] = LAYOUT(
+        KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
+        KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_LOCK, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, C(A(KC_DEL))
+    )
+};

keyboards/0xc7/61key/keymaps/via/keymap.c

@@ -0,0 +1,48 @@
+/* Copyright 2021 0xC7
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
+        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+        KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
+        KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_APP, KC_RCTL
+    ),
+    [1] = LAYOUT(
+        KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
+        KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_LOCK, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, C(A(KC_DEL))
+    ),
+    [2] = LAYOUT(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+    [3] = LAYOUT(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    )
+};

keyboards/0xc7/61key/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/0xc7/61key/readme.md

@@ -0,0 +1,27 @@
+# 61Key
+
+![61Key](https://i.imgur.com/HdE6c6zh.jpeg)
+
+Custom keyboard designed by RealEmanGaming aka 0xC7
+
+* Keyboard Maintainer: [0xC7](https://github.com/RealEmanGaming)
+* Hardware Supported: ATMega32u4
+* Hardware Availability: N/A (private board, might open source)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 61key:default
+
+Flashing example for this keyboard:
+
+    make 61key:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available

keyboards/0xc7/61key/rules.mk

@@ -0,0 +1,24 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = no       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = yes         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+
+LTO_ENABLE = yes
+KEY_LOCK_ENABLE = yes

keyboards/0xcb/1337/info.json

@@ -2,8 +2,6 @@
   "keyboard_name": "0xCB 1337",
   "url": "https://0xCB.dev",
   "maintainer": "Conor-Burns",
-  "width": 3,
-  "height": 3,
   "layouts": {
     "LAYOUT": {
       "layout": [

keyboards/0xcb/1337/rules.mk

@@ -19,7 +19,6 @@ NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
 
 ENCODER_ENABLE = yes

keyboards/0xcb/static/info.json

@@ -2,8 +2,6 @@
   "keyboard_name": "0xCB Static",
   "url": "https://0xCB.dev",
   "maintainer": "Conor-Burns",
-  "width": 12,
-  "height": 5,
   "layout_aliases": {
     "LAYOUT": "LAYOUT_all"
   },

keyboards/0xcb/static/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega328p
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable
@@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
 
 ENCODER_ENABLE = yes

keyboards/10bleoledhub/info.json

@@ -2,9 +2,6 @@
     "keyboard_name": "10bleoledhub",
     "url": "https://github.com/haierwangwei2005/10BLE-OLED-HUB",
     "maintainer": "haierwangwei2005",
-
-    "width": 4,
-    "height": 3,
     "layouts": {
         "LAYOUT": {
             "layout": [

keyboards/1upkeyboards/1up60hse/1up60hse.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "1up60hse.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/1upkeyboards/1up60hse/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "1up60hse",
     "url": "",
     "maintainer": "qmk",
-    "width": 15,
-    "height": 5,
     "layouts": {
         "LAYOUT_60_ansi": {
             "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]

keyboards/1upkeyboards/1up60hse/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
 # Build Options
@@ -26,7 +19,6 @@ NKRO_ENABLE = yes            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 EXTRAFLAGS += -flto
 

keyboards/1upkeyboards/1up60hte/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "1up60hte",
     "url": "https://www.1upkeyboards.com/shop/controllers/1up-rgb-60-pcb-hte/",
     "maintainer": "1upkeyboards",
-    "width": 15,
-    "height": 5,
     "layout_aliases": {
         "LAYOUT_tsangan": "LAYOUT_60_tsangan_hhkb"
     },

keyboards/1upkeyboards/1up60hte/rules.mk

@@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
 
 LTO_ENABLE = yes

keyboards/1upkeyboards/1up60rgb/info.json

@@ -2,8 +2,6 @@
   "keyboard_name": "1up60rgb",
   "url": "",
   "maintainer": "qmk",
-  "width": 15,
-  "height": 5,
   "layouts": {
     "LAYOUT_all": {
       "layout": [

keyboards/1upkeyboards/1up60rgb/keymaps/default/keymap.c

@@ -18,46 +18,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 };
 
-void matrix_init_user(void) {
-}
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	return true;
-}
-
 void led_set_user(uint8_t usb_led) {
-
-	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-	} else {
-
-	}
-
 	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+		setPinOutput(B2);
+		writePinLow(B2);
 	} else {
-		DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+		setPinInput(B2);
+		writePinLow(B2);
 	}
-
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_KANA)) {
-
-	} else {
-
-	}
-
 }

keyboards/1upkeyboards/1up60rgb/keymaps/iso/keymap.c

@@ -18,46 +18,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 };
 
-void matrix_init_user(void) {
-}
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	return true;
-}
-
 void led_set_user(uint8_t usb_led) {
-
-	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-	} else {
-
-	}
-
 	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+		setPinOutput(B2);
+		writePinLow(B2);
 	} else {
-		DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+		setPinInput(B2);
+		writePinLow(B2);
 	}
-
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_KANA)) {
-
-	} else {
-
-	}
-
 }

keyboards/1upkeyboards/1up60rgb/keymaps/tsangan/keymap.c

@@ -18,46 +18,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 };
 
-void matrix_init_user(void) {
-}
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	return true;
-}
-
 void led_set_user(uint8_t usb_led) {
-
-	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-	} else {
-
-	}
-
 	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+		setPinOutput(B2);
+		writePinLow(B2);
 	} else {
-		DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+		setPinInput(B2);
+		writePinLow(B2);
 	}
-
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_KANA)) {
-
-	} else {
-
-	}
-
 }

keyboards/1upkeyboards/1up60rgb/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
 # Build Options

keyboards/1upkeyboards/super16/info.json

@@ -2,8 +2,6 @@
   "keyboard_name": "super16",
   "url": "",
   "maintainer": "qmk",
-  "width": 4,
-  "height": 4,
   "layouts": {
     "LAYOUT_ortho_4x4": {
       "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}]

keyboards/1upkeyboards/super16/keymaps/default/keymap.c

@@ -23,19 +23,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     RGB_MOD,    KC_1,    KC_U,    KC_P
   ),
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/1upkeyboards/super16/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -28,7 +21,6 @@ RGBLIGHT_ENABLE = no       # Enable keyboard RGB underglow
 RGB_MATRIX_ENABLE = yes
 RGB_MATRIX_DRIVER = WS2812
 UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 
 LAYOUTS = ortho_4x4 numpad_4x4

keyboards/1upkeyboards/sweet16/info.json

@@ -2,8 +2,6 @@
   "keyboard_name": "Sweet 16",
   "url": "",
   "maintainer": "skullydazed",
-  "width": 4,
-  "height": 4,
   "layouts": {
       "LAYOUT_ortho_4x4": {
           "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}]

keyboards/1upkeyboards/sweet16/v1/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 RGBLIGHT_ENABLE = yes

keyboards/1upkeyboards/sweet16/v2/promicro/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 ## Features

keyboards/2key2crawl/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "2Key2CrawlPad",
     "url": "",
     "maintainer": "qmk",
-    "width": 6.5,
-    "height": 2,
     "layouts": {
         "LAYOUT": {
             "layout": [

keyboards/2key2crawl/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u2
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
 # Build Options

keyboards/30wer/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "30wer", 
     "url": "", 
     "maintainer": "qmk", 
-    "width": 13.25, 
-    "height": 3, 
     "layouts": {
         "LAYOUT": {
             "layout": [

keyboards/30wer/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -24,5 +17,4 @@ NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: ht
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 AUDIO_ENABLE = no           # Audio output
 UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = no 		# Enable WS2812 RGB underlight.

keyboards/3keyecosystem/2key2/2key2.c

@@ -0,0 +1,35 @@
+/*
+Copyright 2021 John Mueller
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "2key2.h"
+
+// RGB Matrix configuration
+// based on https://docs.qmk.fm/#/feature_rgb_matrix?id=common-configuration
+
+#ifdef RGB_MATRIX_ENABLE
+led_config_t g_led_config = { {
+  // Key Matrix to LED Index
+  {   0, 1 }
+}, {
+  // LED Index to Physical Position
+  // Using range { 0..224, 0..64 }
+  { 0,  32 }, { 224,  32 }
+}, {
+  // LED Index to Flag
+  // https://docs.qmk.fm/#/feature_rgb_matrix?id=flags
+  LED_FLAG_ALL, LED_FLAG_ALL
+} };
+#endif

keyboards/3keyecosystem/2key2/2key2.h

@@ -0,0 +1,33 @@
+/*
+Copyright 2021 John Mueller
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    k00, k01 \
+) { \
+    { k00, k01 }  \
+}

keyboards/3keyecosystem/2key2/config.h

@@ -0,0 +1,59 @@
+/*
+Copyright 2021 John Mueller
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0x1209
+#define PRODUCT_ID   0x3304
+#define DEVICE_VER   0x0001
+#define MANUFACTURER 3-Key-Ecosystem
+#define PRODUCT      2key2
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 2
+
+/* Keyboard Matrix Assignments */
+#define MATRIX_ROW_PINS { F6 }
+#define MATRIX_COL_PINS { F4, D7 }
+#define UNUSED_PINS
+
+// LED on kbmount base board is on B7
+#define LED_CAPS_LOCK_PIN B7 // onboard LED for testing
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* RGB matrix key backlighting */
+#define RGB_DI_PIN B2
+#define DRIVER_LED_TOTAL 2
+#define RGB_MATRIX_KEYPRESSES
+#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_REACTIVE
+#define RGB_MATRIX_STARTUP_HUE 90
+#define RGB_MATRIX_STARTUP_SPD 20
+#define RGB_MATRIX_STARTUP_VAL 128
+#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#define RGB_DISABLE_WHEN_USB_SUSPENDED true
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION

keyboards/3keyecosystem/2key2/info.json

@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "3-Key-Ecosystem 2key2: 2x1 macro-keyboard",
+    "url": "https://github.com/softplus/3keyecosystem/tree/main/2key2",
+    "maintainer": "softplus",
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label": "k00", "x": 0, "y": 0},
+                {"label": "k01", "x": 1, "y": 0}
+            ]
+        }
+    }
+}

keyboards/3keyecosystem/2key2/keymaps/default/keymap.c

@@ -0,0 +1,40 @@
+/* Copyright 2021 John Mueller
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Base */
+    [_BASE] = LAYOUT(
+        KC_A,    KC_B
+    ),
+
+    [1] = LAYOUT(
+        KC_TRNS, KC_TRNS
+    ),
+
+    [2] = LAYOUT(
+        KC_TRNS, KC_TRNS
+    ),
+
+    [3] = LAYOUT(
+        KC_TRNS, KC_TRNS
+    )
+};

keyboards/3keyecosystem/2key2/keymaps/via/keymap.c

@@ -0,0 +1,40 @@
+/* Copyright 2021 John Mueller
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Base */
+    [_BASE] = LAYOUT(
+        KC_A,    KC_B
+    ),
+
+    [1] = LAYOUT(
+        KC_TRNS, KC_TRNS
+    ),
+
+    [2] = LAYOUT(
+        KC_TRNS, KC_TRNS
+    ),
+
+    [3] = LAYOUT(
+        KC_TRNS, KC_TRNS
+    )
+  };

keyboards/3keyecosystem/2key2/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/3keyecosystem/2key2/readme.md

@@ -0,0 +1,24 @@
+# 3-Key-Ecosystem - 2key2
+
+![keyboard](https://i.imgur.com/IJ1Zyc7.jpeg)
+
+This is a 2x1 macro keyboard with WS2812B key lighting.
+It's designed for a modular keyboard mount using an ATmega32U4.
+
+* Keyboard Maintainer: [softplus](https://github.com/softplus)
+* Hardware Supported: [3keyecosystem-2key2](https://github.com/softplus/3keyecosystem/tree/main/2key2)
+* Hardware Availability: Open-Source files at above link
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 3keyecosystem/2key2:default
+
+Flashing example for this keyboard:
+
+    make 3keyecosystem/2key2:default:flash
+
+## Bootloader
+
+To Enter the bootloader, click reset button on the main board.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/3keyecosystem/2key2/rules.mk

@@ -0,0 +1,23 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+RGB_MATRIX_ENABLE = yes		# Enable RGB matrix
+RGB_MATRIX_DRIVER = WS2812	# Select WS2812 driver for RGB matrix
+AUDIO_ENABLE = no           # Audio output

keyboards/3w6/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "3w6",
     "url": "https://github.com/weteor/3W6/",
     "maintainer": "weteor",
-    "width": 13,
-    "height": 5,
     "layouts": {
         "LAYOUT": {
             "layout": [

keyboards/3w6/rev1/matrix.c

@@ -34,9 +34,7 @@ extern i2c_status_t tca9555_status;
 // All address pins of the tca9555 are connected to the ground
 // | 0  | 1  | 0  | 0  | A2 | A1 | A0 |
 // | 0  | 1  | 0  | 0  | 0  | 0  | 0  |
-#define I2C_ADDR 0b0100000
-#define I2C_ADDR_WRITE ((I2C_ADDR << 1) | I2C_WRITE)
-#define I2C_ADDR_READ ((I2C_ADDR << 1) | I2C_READ)
+#define I2C_ADDR (0b0100000 << 1)
 
 // Register addresses
 #define IODIRA 0x06  // i/o direction register
@@ -64,19 +62,14 @@ uint8_t init_tca9555(void) {
     // - unused  : input  : 1
     // - input   : input  : 1
     // - driving : output : 0
-    tca9555_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT);
-    if (tca9555_status) goto out;
-    tca9555_status = i2c_write(IODIRA, I2C_TIMEOUT);
-    if (tca9555_status) goto out;
+    uint8_t conf[2] = {
         // This means: write on pin 5 of port 0, read on rest
-    tca9555_status = i2c_write(0b11011111, I2C_TIMEOUT);
-    if (tca9555_status) goto out;
+        0b11011111,
         // This means: we will write on pins 0 to 2 on port 1. read rest
-    tca9555_status = i2c_write(0b11111000, I2C_TIMEOUT);
-    if (tca9555_status) goto out;
+        0b11111000,
+    };
+    tca9555_status = i2c_writeReg(I2C_ADDR, IODIRA, conf, 2, I2C_TIMEOUT);
 
-out:
-    i2c_stop();
     return tca9555_status;
 }
 
@@ -193,20 +186,14 @@ static matrix_row_t read_cols(uint8_t row) {
             return 0;
         } else {
             uint8_t data     = 0;
-            uint8_t port0   = 0;
-            uint8_t port1   = 0;
-            tca9555_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
-            tca9555_status = i2c_write(IREGP0, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
-            tca9555_status = i2c_start(I2C_ADDR_READ, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
-            tca9555_status = i2c_read_ack(I2C_TIMEOUT);
-            if (tca9555_status < 0) goto out;
-            port0 = (uint8_t)tca9555_status;
-            tca9555_status = i2c_read_nack(I2C_TIMEOUT);
-            if (tca9555_status < 0) goto out;
-            port1 = (uint8_t)tca9555_status;
+            uint8_t ports[2] = {0};
+            tca9555_status = i2c_readReg(I2C_ADDR, IREGP0, ports, 2, I2C_TIMEOUT);
+            if (tca9555_status) {  // if there was an error
+                // do nothing
+                return 0;
+            } else {
+                uint8_t port0 = ports[0];
+                uint8_t port1 = ports[1];
 
                 // The initial state was all ones and any depressed key at a given column for the currently selected row will have its bit flipped to zero.
                 // The return value is a row as represented in the generic matrix code were the rightmost bits represent the lower columns and zeroes represent non-depressed keys while ones represent depressed keys.
@@ -219,11 +206,10 @@ static matrix_row_t read_cols(uint8_t row) {
                 data = ~(data);
 
                 tca9555_status = I2C_STATUS_SUCCESS;
-        out:
-            i2c_stop();
                 return data;
             }
         }
+    }
 }
 
 static void unselect_rows(void) {
@@ -263,18 +249,10 @@ static void select_row(uint8_t row) {
                 default:                    break;
             }
 
-            tca9555_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
-            tca9555_status = i2c_write(OREGP0, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
-            tca9555_status = i2c_write(port0, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
-            tca9555_status = i2c_write(port1, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
+            uint8_t ports[2] = {port0, port1};
+            tca9555_status = i2c_writeReg(I2C_ADDR, OREGP0, ports, 2, I2C_TIMEOUT);
             // Select the desired row by writing a byte for the entire GPIOB bus where only the bit representing the row we want to select is a zero (write instruction) and every other bit is a one.
             // Note that the row - MATRIX_ROWS_PER_SIDE reflects the fact that being on the right hand, the columns are numbered from MATRIX_ROWS_PER_SIDE to MATRIX_ROWS, but the pins we want to write to are indexed from zero up on the GPIOB bus.
-        out:
-            i2c_stop();
         }
     }
 }

keyboards/3w6/rev1/rules.mk

@@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
 UNICODE_ENABLE = yes
 CUSTOM_MATRIX = lite

keyboards/3w6/rev2/matrix.c

@@ -34,9 +34,7 @@ extern i2c_status_t tca9555_status;
 // All address pins of the tca9555 are connected to the ground
 // | 0  | 1  | 0  | 0  | A2 | A1 | A0 |
 // | 0  | 1  | 0  | 0  | 0  | 0  | 0  |
-#define I2C_ADDR 0b0100000
-#define I2C_ADDR_WRITE ((I2C_ADDR << 1) | I2C_WRITE)
-#define I2C_ADDR_READ ((I2C_ADDR << 1) | I2C_READ)
+#define I2C_ADDR (0b0100000 << 1)
 
 // Register addresses
 #define IODIRA 0x06  // i/o direction register
@@ -64,19 +62,14 @@ uint8_t init_tca9555(void) {
     // - unused  : input  : 1
     // - input   : input  : 1
     // - driving : output : 0
-    tca9555_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT);
-    if (tca9555_status) goto out;
-    tca9555_status = i2c_write(IODIRA, I2C_TIMEOUT);
-    if (tca9555_status) goto out;
+    uint8_t conf[2] = {
         // This means: read all pins of port 0
-    tca9555_status = i2c_write(0b11111111, I2C_TIMEOUT);
-    if (tca9555_status) goto out;
+        0b11111111,
         // This means: we will write on pins 0 to 3 on port 1. read rest
-    tca9555_status = i2c_write(0b11110000, I2C_TIMEOUT);
-    if (tca9555_status) goto out;
+        0b11110000,
+    };
+    tca9555_status = i2c_writeReg(I2C_ADDR, IODIRA, conf, 2, I2C_TIMEOUT);
 
-out:
-    i2c_stop();
     return tca9555_status;
 }
 
@@ -194,34 +187,27 @@ static matrix_row_t read_cols(uint8_t row) {
         } else {
             uint8_t data    = 0;
             uint8_t port0   = 0;
-            tca9555_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
-            tca9555_status = i2c_write(IREGP0, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
-            tca9555_status = i2c_start(I2C_ADDR_READ, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
-            tca9555_status = i2c_read_nack(I2C_TIMEOUT);
-            if (tca9555_status < 0) goto out;
-            
-            port0 = ~(uint8_t)tca9555_status;
-
+            tca9555_status  = i2c_readReg(I2C_ADDR, IREGP0, &port0, 1, I2C_TIMEOUT);
+            if (tca9555_status) {  // if there was an error
+                // do nothing
+                return 0;
+            } else {
+                port0 = ~port0;
                 // We read all the pins on GPIOA.
                 // The initial state was all ones and any depressed key at a given column for the currently selected row will have its bit flipped to zero.
                 // The return value is a row as represented in the generic matrix code were the rightmost bits represent the lower columns and zeroes represent non-depressed keys while ones represent depressed keys.
                 // the pins connected to eact columns are sequential, but in reverse order, and counting from zero down (col 5 -> GPIO04, col6  -> GPIO03 and so on).
-            data |= ( port0 & 0x01 ) << 4; 
-            data |= ( port0 & 0x02 ) << 2; 
-            data |= ( port0 & 0x04 ); 
-            data |= ( port0 & 0x08 ) >> 2; 
-            data |= ( port0 & 0x10 ) >> 4; 
+                data |= (port0 & 0x01) << 4;
+                data |= (port0 & 0x02) << 2;
+                data |= (port0 & 0x04);
+                data |= (port0 & 0x08) >> 2;
+                data |= (port0 & 0x10) >> 4;
 
                 tca9555_status = I2C_STATUS_SUCCESS;
-        out:
-            i2c_stop();
-
                 return data;
             }
         }
+    }
 }
 
 static void unselect_rows(void) {
@@ -256,20 +242,15 @@ static void select_row(uint8_t row) {
                 case 4: port1 &= ~(1 << 0); break;
                 case 5: port1 &= ~(1 << 1); break;
                 case 6: port1 &= ~(1 << 2); break;
-                case 7: port1 &= ~(1 << 3); break;
+                case 7:
+                    port1 &= ~(1 << 3);
+                    break;
                 default:                    break;
             }
 
+            tca9555_status = i2c_writeReg(I2C_ADDR, OREGP1, &port1, 1, I2C_TIMEOUT);
             // Select the desired row by writing a byte for the entire GPIOB bus where only the bit representing the row we want to select is a zero (write instruction) and every other bit is a one.
             // Note that the row - MATRIX_ROWS_PER_SIDE reflects the fact that being on the right hand, the columns are numbered from MATRIX_ROWS_PER_SIDE to MATRIX_ROWS, but the pins we want to write to are indexed from zero up on the GPIOB bus.
-            tca9555_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
-            tca9555_status = i2c_write(OREGP1, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
-            tca9555_status = i2c_write(port1, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
-        out:
-            i2c_stop();
         }
     }
 }

keyboards/3w6/rev2/rules.mk

@@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
 UNICODE_ENABLE = yes
 CUSTOM_MATRIX = lite

keyboards/40percentclub/25/25.c

@@ -15,33 +15,6 @@
  */
 #include "25.h"
 
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}
-
 #ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {

keyboards/40percentclub/25/info.json

@@ -2,11 +2,8 @@
     "keyboard_name": "foobar",
     "url": "",
     "maintainer": "qmk",
-    "width": 6,
-    "height": 2,
     "layouts": {
         "LAYOUT_ortho_5x5": {
-            "key_count": 15,
             "layout": [
               {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0},
               {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1},
@@ -16,7 +13,6 @@
           ]
         },
         "LAYOUT_ortho_5x10": {
-            "key_count": 30,
             "layout": [
               {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0},
               {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1},

keyboards/40percentclub/25/keymaps/default/keymap.c

@@ -70,18 +70,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
   ),
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/40percentclub/25/keymaps/macro/keymap.c

@@ -24,19 +24,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_LCTL,  KC_LGUI, KC_LALT, KC_SPC,  KC_SPC \
   ),
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/40percentclub/25/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -26,7 +19,6 @@ NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 
 # Enable generic behavior for split boards

keyboards/40percentclub/4pack/4pack.c

@@ -29,26 +29,3 @@ void matrix_init_kb(void) {
   // Do the rest
   matrix_init_user();
 }
-
-/*
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/

keyboards/40percentclub/4pack/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "4pack", 
     "url": "", 
     "maintainer": "qmk", 
-    "width": 4, 
-    "height": 1, 
     "layouts": {
         "LAYOUT": {
             "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}]

keyboards/40percentclub/4pack/keymaps/default/keymap.c

@@ -21,6 +21,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_A, KC_S, KC_D, KC_F
     ),
 };
-
-
-void matrix_init_user(void) { }

keyboards/40percentclub/4pack/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -26,5 +19,4 @@ NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/40percentclub/4x4/4x4.c

@@ -1,29 +1 @@
-
 #include "4x4.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/40percentclub/4x4/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "40percent.club 4x4",
     "url": "",
     "maintainer": "qmk",
-    "height": 4,
-    "width": 4,
     "layouts": {
         "LAYOUT_ortho_4x4": {
             "layout": [

keyboards/40percentclub/4x4/keymaps/default/keymap.c

@@ -86,19 +86,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ),
 
 };
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/40percentclub/4x4/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -25,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 
 LAYOUTS = ortho_4x4 ortho_4x12

keyboards/40percentclub/5x5/5x5.c

@@ -1,29 +1 @@
-
 #include "5x5.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/40percentclub/5x5/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "40percent.club 5x5",
     "url": "",
     "maintainer": "qmk",
-    "height": 4,
-    "width": 4,
     "layouts": {
         "LAYOUT_ortho_5x5": {
             "layout": [

keyboards/40percentclub/5x5/keymaps/default/keymap.c

@@ -98,20 +98,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ),
 
 };
-
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/40percentclub/5x5/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -25,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 
 LAYOUTS = ortho_5x15

keyboards/40percentclub/6lit/6lit.c

@@ -15,33 +15,6 @@
  */
 #include "6lit.h"
 
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}
-
 #ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {

keyboards/40percentclub/6lit/info.json

@@ -2,18 +2,14 @@
     "keyboard_name": "6lit",
     "url": "",
     "maintainer": "qmk",
-    "width": 6,
-    "height": 2,
     "layouts": {
         "LAYOUT_ortho_2x3": {
-            "key_count": 6,
             "layout": [
               {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0},
               {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}
             ]
         },
         "LAYOUT_ortho_2x6": {
-            "key_count": 12,
             "layout": [
               {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0},
               {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}

keyboards/40percentclub/6lit/keymaps/default/keymap.c

@@ -21,19 +21,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_F19,   KC_F20,   KC_F21,   KC_F22,   KC_F23,   KC_F24  \
   ),
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/40percentclub/6lit/keymaps/macro/keymap.c

@@ -21,19 +21,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_F22,   KC_F23,   KC_F24  \
   ),
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/40percentclub/6lit/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -26,7 +19,6 @@ NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 
 # Enable generic behavior for split boards

keyboards/40percentclub/foobar/foobar.c

@@ -15,33 +15,6 @@
  */
 #include "foobar.h"
 
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}
-
 #ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {

keyboards/40percentclub/foobar/info.json

@@ -2,11 +2,8 @@
     "keyboard_name": "foobar",
     "url": "",
     "maintainer": "qmk",
-    "width": 10,
-    "height": 3,
     "layouts": {
         "LAYOUT_ortho_3x5": {
-            "key_count": 15,
             "layout": [
               {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0},
               {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1},
@@ -14,7 +11,6 @@
             ]
         },
         "LAYOUT_ortho_3x10": {
-            "key_count": 30,
             "layout": [
               {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0},
               {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1},

keyboards/40percentclub/foobar/keymaps/default/keymap.c

@@ -73,19 +73,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     _______, _______, _______, _______, _______, RESET,   _______, _______, _______, _______
   ),
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/40percentclub/foobar/keymaps/macro/keymap.c

@@ -22,19 +22,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_F21,   KC_F22,   KC_F23,   KC_F14,   KC_INT5  \
   ),
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}