OLED TIMEOUT 0 and OLED_DISABLE_TIMEOUT should behave the same (#14302)

Co-authored-by: Ryan <fauxpark@gmail.com>

common_features.mk

@@ -698,19 +698,23 @@ ifeq ($(strip $(AUTO_SHIFT_ENABLE)), yes)
 endif
 
 JOYSTICK_ENABLE ?= no
-ifneq ($(strip $(JOYSTICK_ENABLE)), no)
+VALID_JOYSTICK_TYPES := analog digital
+JOYSTICK_DRIVER ?= analog
+ifeq ($(strip $(JOYSTICK_ENABLE)), yes)
+    ifeq ($(filter $(JOYSTICK_DRIVER),$(VALID_JOYSTICK_TYPES)),)
+        $(error "$(JOYSTICK_DRIVER)" is not a valid joystick driver)
+    endif
     OPT_DEFS += -DJOYSTICK_ENABLE
     SRC += $(QUANTUM_DIR)/process_keycode/process_joystick.c
     SRC += $(QUANTUM_DIR)/joystick.c
-endif
 
-ifeq ($(strip $(JOYSTICK_ENABLE)), analog)
-    OPT_DEFS += -DANALOG_JOYSTICK_ENABLE
-    SRC += analog.c
-endif
-
-ifeq ($(strip $(JOYSTICK_ENABLE)), digital)
-    OPT_DEFS += -DDIGITAL_JOYSTICK_ENABLE
+    ifeq ($(strip $(JOYSTICK_DRIVER)), analog)
+        OPT_DEFS += -DANALOG_JOYSTICK_ENABLE
+        SRC += analog.c
+    endif
+    ifeq ($(strip $(JOYSTICK_DRIVER)), digital)
+        OPT_DEFS += -DDIGITAL_JOYSTICK_ENABLE
+    endif
 endif
 
 DIGITIZER_ENABLE ?= no

docs/faq_keymap.md

@@ -5,7 +5,7 @@ This page covers questions people often have about keymaps. If you haven't you s
 ## What Keycodes Can I Use?
 See [Keycodes](keycodes.md) for an index of keycodes available to you. These link to more extensive documentation when available.
 
-Keycodes are actually defined in [common/keycode.h](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/keycode.h).
+Keycodes are actually defined in [quantum/keycode.h](https://github.com/qmk/qmk_firmware/blob/master/quantum/keycode.h).
 
 ## What Are the Default Keycodes?
 

docs/feature_joystick.md

@@ -2,8 +2,6 @@
 
 The keyboard can be made to be recognized as a joystick HID device by the operating system.
 
-This is enabled by adding `JOYSTICK_ENABLE` to `rules.mk`. You can set this value to `analog`, `digital`, or `no`.
-
 !> Joystick support is not currently available on V-USB devices.
 
 The joystick feature provides two services:
@@ -18,7 +16,8 @@ or send gamepad reports based on values computed by the keyboard.
 To use analog input you must first enable it in `rules.mk`:
 
 ```makefile
-JOYSTICK_ENABLE = analog
+JOYSTICK_ENABLE = yes
+JOYSTICK_DRIVER = analog # or 'digital'
 ```
 
 An analog device such as a potentiometer found on a gamepad's analog axes is based on a [voltage divider](https://en.wikipedia.org/wiki/Voltage_divider).

docs/feature_key_overrides.md

@@ -103,7 +103,7 @@ const key_override_t **key_overrides = (const key_override_t *[]){
 ```
 
 ### Flexible macOS-friendly Grave Escape
-The [Grave Escape feature](https://docs.qmk.fm/using-qmk/advanced-keycodes/feature_grave_esc) is limited in its configurability and has [bugs when used on macOS](https://docs.qmk.fm/using-qmk/advanced-keycodes/feature_grave_esc#caveats). Key overrides can be used to achieve a similar functionality as Grave Escape, but with more customization and without bugs on macOS.
+The [Grave Escape feature](feature_grave_esc.md) is limited in its configurability and has [bugs when used on macOS](feature_grave_esc.md#caveats). Key overrides can be used to achieve a similar functionality as Grave Escape, but with more customization and without bugs on macOS.
 
 ```c
 // Shift + esc = ~

docs/feature_oled_driver.md

@@ -356,6 +356,10 @@ bool oled_scroll_left(void);
 // Returns true if the screen was not scrolling or stops scrolling
 bool oled_scroll_off(void);
 
+// Returns true if the oled is currently scrolling, false if it is
+// not
+bool is_oled_scrolling(void);
+
 // Inverts the display
 // Returns true if the screen was or is inverted
 bool oled_invert(bool invert);

docs/feature_velocikey.md

@@ -13,7 +13,7 @@ EXTRAKEY_ENABLE = yes
 VELOCIKEY_ENABLE = yes
 ```
 
-Then, while using your keyboard, you need to also turn it on with the VLK_TOG keycode, which toggles the feature on and off.
+Then, while using your keyboard, you need to also turn it on with the `VLK_TOG` keycode, which toggles the feature on and off.
 
 The following light effects will all be controlled by Velocikey when it is enabled:
  - RGB Breathing

docs/reference_glossary.md

@@ -130,7 +130,7 @@ A 1 byte number that is sent as part of a HID report over USB that represents a
 ## Space Cadet Shift
 A special set of shift keys which allow you to type various types of braces by tapping the left or right shift one or more times.
 
-* [Space Cadet Shift Documentation](feature_space_cadet_shift.md)
+* [Space Cadet Shift Documentation](feature_space_cadet.md)
 
 ## Tap
 Pressing and releasing a key. In some situations you will need to distinguish between a key down and a key up event, and Tap always refers to both at once.

drivers/oled/oled_driver.h

@@ -313,6 +313,10 @@ bool oled_scroll_left(void);
 // Returns true if the screen was not scrolling or stops scrolling
 bool oled_scroll_off(void);
 
+// Returns true if the oled is currently scrolling, false if it is
+// not
+bool is_oled_scrolling(void);
+
 // Inverts the display
 // Returns true if the screen was or is inverted
 bool oled_invert(bool invert);

drivers/oled/ssd1306_sh1106.c

@@ -692,6 +692,8 @@ bool oled_scroll_off(void) {
     return !oled_scrolling;
 }
 
+bool is_oled_scrolling(void) { return oled_scrolling; }
+
 bool oled_invert(bool invert) {
     if (!oled_initialized) {
         return oled_inverted;

keyboards/1upkeyboards/1up60hse/1up60hse.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "1up60hse.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/1upkeyboards/1up60rgb/keymaps/default/keymap.c

@@ -18,46 +18,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 };
 
-void matrix_init_user(void) {
-}
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	return true;
-}
-
 void led_set_user(uint8_t usb_led) {
-
-	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-	} else {
-
-	}
-
 	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+		setPinOutput(B2);
+		writePinLow(B2);
 	} else {
-		DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+		setPinInput(B2);
+		writePinLow(B2);
 	}
-
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_KANA)) {
-
-	} else {
-
-	}
-
 }

keyboards/1upkeyboards/1up60rgb/keymaps/iso/keymap.c

@@ -18,46 +18,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 };
 
-void matrix_init_user(void) {
-}
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	return true;
-}
-
 void led_set_user(uint8_t usb_led) {
-
-	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-	} else {
-
-	}
-
 	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+		setPinOutput(B2);
+		writePinLow(B2);
 	} else {
-		DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+		setPinInput(B2);
+		writePinLow(B2);
 	}
-
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_KANA)) {
-
-	} else {
-
-	}
-
 }

keyboards/1upkeyboards/1up60rgb/keymaps/tsangan/keymap.c

@@ -18,46 +18,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 };
 
-void matrix_init_user(void) {
-}
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	return true;
-}
-
 void led_set_user(uint8_t usb_led) {
-
-	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-	} else {
-
-	}
-
 	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+		setPinOutput(B2);
+		writePinLow(B2);
 	} else {
-		DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+		setPinInput(B2);
+		writePinLow(B2);
 	}
-
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_KANA)) {
-
-	} else {
-
-	}
-
 }

keyboards/1upkeyboards/super16/keymaps/default/keymap.c

@@ -23,19 +23,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     RGB_MOD,    KC_1,    KC_U,    KC_P
   ),
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/3w6/rev1/matrix.c

@@ -34,9 +34,7 @@ extern i2c_status_t tca9555_status;
 // All address pins of the tca9555 are connected to the ground
 // | 0  | 1  | 0  | 0  | A2 | A1 | A0 |
 // | 0  | 1  | 0  | 0  | 0  | 0  | 0  |
-#define I2C_ADDR 0b0100000
-#define I2C_ADDR_WRITE ((I2C_ADDR << 1) | I2C_WRITE)
-#define I2C_ADDR_READ ((I2C_ADDR << 1) | I2C_READ)
+#define I2C_ADDR (0b0100000 << 1)
 
 // Register addresses
 #define IODIRA 0x06  // i/o direction register
@@ -64,19 +62,14 @@ uint8_t init_tca9555(void) {
     // - unused  : input  : 1
     // - input   : input  : 1
     // - driving : output : 0
-    tca9555_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT);
-    if (tca9555_status) goto out;
-    tca9555_status = i2c_write(IODIRA, I2C_TIMEOUT);
-    if (tca9555_status) goto out;
-    // This means: write on pin 5 of port 0, read on rest
-    tca9555_status = i2c_write(0b11011111, I2C_TIMEOUT);
-    if (tca9555_status) goto out;
-    // This means: we will write on pins 0 to 2 on port 1. read rest
-    tca9555_status = i2c_write(0b11111000, I2C_TIMEOUT);
-    if (tca9555_status) goto out;
+    uint8_t conf[2] = {
+        // This means: write on pin 5 of port 0, read on rest
+        0b11011111,
+        // This means: we will write on pins 0 to 2 on port 1. read rest
+        0b11111000,
+    };
+    tca9555_status = i2c_writeReg(I2C_ADDR, IODIRA, conf, 2, I2C_TIMEOUT);
 
-out:
-    i2c_stop();
     return tca9555_status;
 }
 
@@ -192,36 +185,29 @@ static matrix_row_t read_cols(uint8_t row) {
         if (tca9555_status) {  // if there was an error
             return 0;
         } else {
-            uint8_t data    = 0;
-            uint8_t port0   = 0;
-            uint8_t port1   = 0;
-            tca9555_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
-            tca9555_status = i2c_write(IREGP0, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
-            tca9555_status = i2c_start(I2C_ADDR_READ, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
-            tca9555_status = i2c_read_ack(I2C_TIMEOUT);
-            if (tca9555_status < 0) goto out;
-            port0 = (uint8_t)tca9555_status;
-            tca9555_status = i2c_read_nack(I2C_TIMEOUT);
-            if (tca9555_status < 0) goto out;
-            port1 = (uint8_t)tca9555_status;
+            uint8_t data     = 0;
+            uint8_t ports[2] = {0};
+            tca9555_status = i2c_readReg(I2C_ADDR, IREGP0, ports, 2, I2C_TIMEOUT);
+            if (tca9555_status) {  // if there was an error
+                // do nothing
+                return 0;
+            } else {
+                uint8_t port0 = ports[0];
+                uint8_t port1 = ports[1];
 
-            // The initial state was all ones and any depressed key at a given column for the currently selected row will have its bit flipped to zero.
-            // The return value is a row as represented in the generic matrix code were the rightmost bits represent the lower columns and zeroes represent non-depressed keys while ones represent depressed keys.
-            // Since the pins are not ordered sequentially, we have to build the correct dataset from the two ports. Refer to the schematic to see where every pin is connected.
-            data |= ( port0 & 0x01 ); 
-            data |= ( port0 & 0x02 ); 
-            data |= ( port1 & 0x10 ) >> 2; 
-            data |= ( port1 & 0x08 ); 
-            data |= ( port0 & 0x40 ) >> 2; 
-            data = ~(data);
+                // The initial state was all ones and any depressed key at a given column for the currently selected row will have its bit flipped to zero.
+                // The return value is a row as represented in the generic matrix code were the rightmost bits represent the lower columns and zeroes represent non-depressed keys while ones represent depressed keys.
+                // Since the pins are not ordered sequentially, we have to build the correct dataset from the two ports. Refer to the schematic to see where every pin is connected.
+                data |= ( port0 & 0x01 ); 
+                data |= ( port0 & 0x02 ); 
+                data |= ( port1 & 0x10 ) >> 2; 
+                data |= ( port1 & 0x08 ); 
+                data |= ( port0 & 0x40 ) >> 2; 
+                data = ~(data);
 
-            tca9555_status = I2C_STATUS_SUCCESS;
-        out:
-            i2c_stop();
-            return data;
+                tca9555_status = I2C_STATUS_SUCCESS;
+                return data;
+            }
         }
     }
 }
@@ -263,18 +249,10 @@ static void select_row(uint8_t row) {
                 default:                    break;
             }
 
-            tca9555_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
-            tca9555_status = i2c_write(OREGP0, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
-            tca9555_status = i2c_write(port0, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
-            tca9555_status = i2c_write(port1, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
+            uint8_t ports[2] = {port0, port1};
+            tca9555_status = i2c_writeReg(I2C_ADDR, OREGP0, ports, 2, I2C_TIMEOUT);
             // Select the desired row by writing a byte for the entire GPIOB bus where only the bit representing the row we want to select is a zero (write instruction) and every other bit is a one.
             // Note that the row - MATRIX_ROWS_PER_SIDE reflects the fact that being on the right hand, the columns are numbered from MATRIX_ROWS_PER_SIDE to MATRIX_ROWS, but the pins we want to write to are indexed from zero up on the GPIOB bus.
-        out:
-            i2c_stop();
         }
     }
 }

keyboards/3w6/rev2/matrix.c

@@ -34,9 +34,7 @@ extern i2c_status_t tca9555_status;
 // All address pins of the tca9555 are connected to the ground
 // | 0  | 1  | 0  | 0  | A2 | A1 | A0 |
 // | 0  | 1  | 0  | 0  | 0  | 0  | 0  |
-#define I2C_ADDR 0b0100000
-#define I2C_ADDR_WRITE ((I2C_ADDR << 1) | I2C_WRITE)
-#define I2C_ADDR_READ ((I2C_ADDR << 1) | I2C_READ)
+#define I2C_ADDR (0b0100000 << 1)
 
 // Register addresses
 #define IODIRA 0x06  // i/o direction register
@@ -64,19 +62,14 @@ uint8_t init_tca9555(void) {
     // - unused  : input  : 1
     // - input   : input  : 1
     // - driving : output : 0
-    tca9555_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT);
-    if (tca9555_status) goto out;
-    tca9555_status = i2c_write(IODIRA, I2C_TIMEOUT);
-    if (tca9555_status) goto out;
-    // This means: read all pins of port 0
-    tca9555_status = i2c_write(0b11111111, I2C_TIMEOUT);
-    if (tca9555_status) goto out;
-    // This means: we will write on pins 0 to 3 on port 1. read rest
-    tca9555_status = i2c_write(0b11110000, I2C_TIMEOUT);
-    if (tca9555_status) goto out;
+    uint8_t conf[2] = {
+        // This means: read all pins of port 0
+        0b11111111,
+        // This means: we will write on pins 0 to 3 on port 1. read rest
+        0b11110000,
+    };
+    tca9555_status = i2c_writeReg(I2C_ADDR, IODIRA, conf, 2, I2C_TIMEOUT);
 
-out:
-    i2c_stop();
     return tca9555_status;
 }
 
@@ -194,32 +187,25 @@ static matrix_row_t read_cols(uint8_t row) {
         } else {
             uint8_t data    = 0;
             uint8_t port0   = 0;
-            tca9555_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
-            tca9555_status = i2c_write(IREGP0, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
-            tca9555_status = i2c_start(I2C_ADDR_READ, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
-            tca9555_status = i2c_read_nack(I2C_TIMEOUT);
-            if (tca9555_status < 0) goto out;
-            
-            port0 = ~(uint8_t)tca9555_status;
+            tca9555_status  = i2c_readReg(I2C_ADDR, IREGP0, &port0, 1, I2C_TIMEOUT);
+            if (tca9555_status) {  // if there was an error
+                // do nothing
+                return 0;
+            } else {
+                port0 = ~port0;
+                // We read all the pins on GPIOA.
+                // The initial state was all ones and any depressed key at a given column for the currently selected row will have its bit flipped to zero.
+                // The return value is a row as represented in the generic matrix code were the rightmost bits represent the lower columns and zeroes represent non-depressed keys while ones represent depressed keys.
+                // the pins connected to eact columns are sequential, but in reverse order, and counting from zero down (col 5 -> GPIO04, col6  -> GPIO03 and so on).
+                data |= (port0 & 0x01) << 4;
+                data |= (port0 & 0x02) << 2;
+                data |= (port0 & 0x04);
+                data |= (port0 & 0x08) >> 2;
+                data |= (port0 & 0x10) >> 4;
 
-            // We read all the pins on GPIOA.
-            // The initial state was all ones and any depressed key at a given column for the currently selected row will have its bit flipped to zero.
-            // The return value is a row as represented in the generic matrix code were the rightmost bits represent the lower columns and zeroes represent non-depressed keys while ones represent depressed keys.
-            // the pins connected to eact columns are sequential, but in reverse order, and counting from zero down (col 5 -> GPIO04, col6  -> GPIO03 and so on).
-            data |= ( port0 & 0x01 ) << 4; 
-            data |= ( port0 & 0x02 ) << 2; 
-            data |= ( port0 & 0x04 ); 
-            data |= ( port0 & 0x08 ) >> 2; 
-            data |= ( port0 & 0x10 ) >> 4; 
-
-            tca9555_status = I2C_STATUS_SUCCESS;
-        out:
-            i2c_stop();
-
-            return data;
+                tca9555_status = I2C_STATUS_SUCCESS;
+                return data;
+            }
         }
     }
 }
@@ -256,20 +242,15 @@ static void select_row(uint8_t row) {
                 case 4: port1 &= ~(1 << 0); break;
                 case 5: port1 &= ~(1 << 1); break;
                 case 6: port1 &= ~(1 << 2); break;
-                case 7: port1 &= ~(1 << 3); break;
+                case 7:
+                    port1 &= ~(1 << 3);
+                    break;
                 default:                    break;
             }
 
+            tca9555_status = i2c_writeReg(I2C_ADDR, OREGP1, &port1, 1, I2C_TIMEOUT);
             // Select the desired row by writing a byte for the entire GPIOB bus where only the bit representing the row we want to select is a zero (write instruction) and every other bit is a one.
             // Note that the row - MATRIX_ROWS_PER_SIDE reflects the fact that being on the right hand, the columns are numbered from MATRIX_ROWS_PER_SIDE to MATRIX_ROWS, but the pins we want to write to are indexed from zero up on the GPIOB bus.
-            tca9555_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
-            tca9555_status = i2c_write(OREGP1, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
-            tca9555_status = i2c_write(port1, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
-        out:
-            i2c_stop();
         }
     }
 }

keyboards/40percentclub/25/25.c

@@ -15,33 +15,6 @@
  */
 #include "25.h"
 
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}
-
 #ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {

keyboards/40percentclub/25/keymaps/default/keymap.c

@@ -70,18 +70,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
   ),
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/40percentclub/25/keymaps/macro/keymap.c

@@ -24,19 +24,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_LCTL,  KC_LGUI, KC_LALT, KC_SPC,  KC_SPC \
   ),
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/40percentclub/4pack/4pack.c

@@ -29,26 +29,3 @@ void matrix_init_kb(void) {
   // Do the rest
   matrix_init_user();
 }
-
-/*
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/

keyboards/40percentclub/4pack/keymaps/default/keymap.c

@@ -21,6 +21,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_A, KC_S, KC_D, KC_F
     ),
 };
-
-
-void matrix_init_user(void) { }

keyboards/40percentclub/4x4/4x4.c

@@ -1,29 +1 @@
-
 #include "4x4.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/40percentclub/4x4/keymaps/default/keymap.c

@@ -86,19 +86,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ),
 
 };
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/40percentclub/5x5/5x5.c

@@ -1,29 +1 @@
-
 #include "5x5.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/40percentclub/5x5/keymaps/default/keymap.c

@@ -98,20 +98,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ),
 
 };
-
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/40percentclub/6lit/6lit.c

@@ -15,33 +15,6 @@
  */
 #include "6lit.h"
 
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}
-
 #ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {

keyboards/40percentclub/6lit/keymaps/default/keymap.c

@@ -21,19 +21,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_F19,   KC_F20,   KC_F21,   KC_F22,   KC_F23,   KC_F24  \
   ),
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/40percentclub/6lit/keymaps/macro/keymap.c

@@ -21,19 +21,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_F22,   KC_F23,   KC_F24  \
   ),
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/40percentclub/foobar/foobar.c

@@ -15,33 +15,6 @@
  */
 #include "foobar.h"
 
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}
-
 #ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {

keyboards/40percentclub/foobar/keymaps/default/keymap.c

@@ -73,19 +73,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     _______, _______, _______, _______, _______, RESET,   _______, _______, _______, _______
   ),
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/40percentclub/foobar/keymaps/macro/keymap.c

@@ -22,19 +22,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_F21,   KC_F22,   KC_F23,   KC_F14,   KC_INT5  \
   ),
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/40percentclub/half_n_half/half_n_half.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "half_n_half.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/40percentclub/half_n_half/keymaps/default/keymap.c

@@ -51,15 +51,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   }
   return true;
 }
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/40percentclub/i75/i75.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "i75.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/40percentclub/i75/keymaps/default/keymap.c

@@ -52,15 +52,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   }
   return true;
 }
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/40percentclub/mf68/mf68.c

@@ -1,8 +1 @@
 #include "mf68.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}

keyboards/40percentclub/nano/nano.c

@@ -1,5 +1 @@
 #include "nano.h"
-
-void matrix_init_kb(void) {
-	matrix_init_user();
-}

keyboards/40percentclub/nori/keymaps/macro/keymap.c

@@ -23,19 +23,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_F21,   KC_F22,   KC_F23,   KC_F24   \
   ),
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/40percentclub/nori/nori.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "nori.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/40percentclub/tomato/keymaps/default/keymap.c

@@ -97,47 +97,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     , _______,_______,_______,_______,RESET,  _______,_______,_______,_______,_______
     ),
 };
-
-void matrix_init_user(void) {
-}
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_KANA)) {
-
-	} else {
-
-	}
-
-}

keyboards/40percentclub/ut47/ut47.c

@@ -18,20 +18,6 @@
   #include "protocol/serial.h"
 #endif
 
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
 bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
 	// put your per-action keyboard code here
 	// runs for every action, just before processing by the firmware
@@ -42,9 +28,3 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
   }
 	return process_record_user(keycode, record);
 }
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/6ball/6ball.c

@@ -1,5 +1 @@
 #include "6ball.h"
-
-void matrix_init_kb(void) {
-	matrix_init_user();
-}

keyboards/9key/9key.c

@@ -1,5 +1 @@
 #include "9key.h"
-
-void matrix_init_kb(void) {
-	matrix_init_user();
-}

keyboards/abstract/ellipse/keymaps/abstractkb/keymap.c

@@ -27,22 +27,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   )
 };
 
-/*bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}*/
-
-/*void matrix_init_user(void) {
-
-}*/
-
-/*void matrix_scan_user(void) {
-
-}*/
-
-/*void led_set_user(uint8_t usb_led) {
-
-}*/
-
 bool encoder_update_user(uint8_t index, bool clockwise) {
 	if (index == 0) { /* First encoder */
 		if (clockwise) {

keyboards/abstract/ellipse/keymaps/default/keymap.c

@@ -27,22 +27,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   )
 };
 
-/*bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}*/
-
-/*void matrix_init_user(void) {
-
-}*/
-
-/*void matrix_scan_user(void) {
-
-}*/
-
-/*void led_set_user(uint8_t usb_led) {
-
-}*/
-
 bool encoder_update_user(uint8_t index, bool clockwise) {
 	if (index == 0) { /* First encoder */
 		if (clockwise) {

keyboards/abstract/ellipse/rev1/rev1.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "rev1.h"
-
-/*void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}*/

keyboards/acheron/shark/shark.c

@@ -14,38 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "shark.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/

keyboards/adkb96/rev1/rev1.c

@@ -1,15 +1 @@
 #include "adkb96.h"
-
-void matrix_init_kb(void) {
-
-    // // green led on
-    // DDRD |= (1<<5);
-    // PORTD &= ~(1<<5);
-
-    // // orange led on
-    // DDRB |= (1<<0);
-    // PORTB &= ~(1<<0);
-
-	matrix_init_user();
-};
-

keyboards/ai03/lunar/keymaps/default/keymap.c

@@ -76,15 +76,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   }
   return true;
 }
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/ai03/lunar/lunar.c

@@ -14,9 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "lunar.h"
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/ai03/orbit/keymaps/default/keymap.c

@@ -72,20 +72,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   }
   return true;
 }
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}
-
-layer_state_t layer_state_set_user(layer_state_t state) {
-		
-	return state;
-}

keyboards/ai03/orbit/orbit.c

@@ -172,20 +172,6 @@ void matrix_init_kb(void) {
 	matrix_init_user();
 }
 
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
 void led_set_kb(uint8_t usb_led) {
 	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
 	
@@ -222,5 +208,3 @@ uint32_t layer_state_set_kb(uint32_t state) {
 	
 	return layer_state_set_user(state);
 }
-
-

keyboards/ai03/quasar/keymaps/default/keymap.c

@@ -43,19 +43,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	_______,          _______,                                     _______,                                     _______,          _______,    _______, _______, _______  
   )
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/ai03/quasar/quasar.c

@@ -14,38 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "quasar.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/

keyboards/ai03/soyuz/keymaps/default/keymap.c

@@ -24,19 +24,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	KC_P0,   KC_P0,   KC_PDOT, KC_PENT  \
   )
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/ai03/soyuz/soyuz.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "soyuz.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/akb/eb46/eb46.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "eb46.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/alf/dc60/keymaps/default/keymap.c

@@ -32,19 +32,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                  KC_TRNS, KC_TRNS, KC_TRNS
       ),
 };
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/alf/x2/keymaps/default/keymap.c

@@ -19,20 +19,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
 };
 
-void matrix_init_user(void) {
-}
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
 void led_set_user(uint8_t usb_led) {
   if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-    DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+    setPinOutput(B2);
+    writePinLow(B2);
   } else {
-    DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+    setPinInput(B2);
+    writePinLow(B2);
   }
 }

keyboards/alpha/keymaps/default/keymap.c

@@ -41,9 +41,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
 		KC_NO, KC_NO, KC_NO, TO(0), MACRO1, KC_NO, KC_NO, KC_NO),
 };
-
-void matrix_init_user(void) {
-}
-
-void matrix_scan_user(void) {
-}

keyboards/amj96/amj96.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "amj96.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/amj96/keymaps/default/keymap.c

@@ -35,19 +35,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     _______, _______, _______,                            _______,                            _______, _______, _______, _______, _______,          _______, _______, _______  \
   )
 };
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/amjkeyboard/amj66/amj66.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "amj66.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/angel17/alpha/alpha.c

@@ -14,38 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "alpha.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/

keyboards/angel17/keymaps/default/keymap.c

@@ -36,19 +36,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         RGB_TOG,    KC_NO,         KC_NO
   ),
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/angel17/rev1/rev1.c

@@ -14,38 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "rev1.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/

keyboards/angel64/alpha/alpha.c

@@ -14,38 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "alpha.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/

keyboards/angel64/rev1/rev1.c

@@ -14,38 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "rev1.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/

keyboards/at101_bh/keymaps/default/keymap.c

@@ -19,35 +19,26 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_TRNS, KC_TRNS, KC_TRNS, 					 KC_TRNS, 							 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 	KC_TRNS, KC_TRNS, KC_TRNS,			KC_TRNS, 	  KC_TRNS),
 };
 
-void matrix_init_user(void) {
-}
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	return true;
-}
-
 void led_set_user(uint8_t usb_led) {
-  DDRB |= (1 << 4);
-  DDRD |= (1 << 6) | (1 << 7);
+  setPinOutput(B4);
+  setPinOutput(D6);
+  setPinOutput(D7);
 
   if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-    PORTD |= (1 << 7);
+    writePinHigh(D7);
   } else {
-    PORTD &= ~(1 << 7);
+    writePinLow(D7);
   }
 
   if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-    PORTB |= (1 << 4);
+    writePinHigh(B4);
   } else {
-    PORTB &= ~(1 << 4);
+    writePinLow(B4);
   }
 
   if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-    PORTD |= (1 << 6);
+    writePinHigh(D6);
   } else {
-    PORTD &= ~(1 << 6);
+    writePinLow(D6);
   }
-}
+}

keyboards/baguette/baguette.c

@@ -49,23 +49,3 @@ void matrix_init_kb(void) {
 
 	matrix_init_user();
 }
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/baguette/keymaps/default/keymap.c

@@ -30,21 +30,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_TRNS,  KC_TRNS,  BL_TOGG,  BL_STEP,  BL_BRTG,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,          \
                         KC_TRNS,  KC_TRNS,                                KC_TRNS,                                KC_RCTL,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS),
 };
-
-
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/baguette/keymaps/iso/keymap.c

@@ -30,21 +30,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_TRNS,  KC_TRNS,  BL_TOGG,  BL_STEP,  BL_BRTG,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,          \
               KC_TRNS,  KC_TRNS,                                KC_TRNS,                                KC_RCTL,  KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS),
 };
-
-
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/basketweave/config.h

@@ -19,7 +19,7 @@
 #include "config_common.h"
 
 #define VENDOR_ID       0x6B62
-#define PRODUCT_ID      0x6869
+#define PRODUCT_ID      0x8989
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    Clackery
 #define PRODUCT         Basketweave

keyboards/basketweave/keymaps/via/keymap.c

@@ -51,6 +51,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
      /*         ctrl      alt              space              fn               space              alt      ctrl              left     down     right  */
                KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS,          KC_TRNS,          KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+
+      [3] = LAYOUT_default(  /* extra */
+     /* esc       `        1        2        3        4        5        6        7        8        9        0        -        =       bspc   */
+      KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+     /* ins     tab        Q        W        E        R        T        Y        U        I        O        P        [        ]        \     rotary   */
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS, KC_INS,  KC_TRNS, KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+     /* del     caps       A        S        D        F        G        H        J        K        L        ;        '       enter     */
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS,  KC_TRNS,
+     /*         shift      Z        X        C        V        B        B        N        M        ,        .        /       shift     up   */
+               KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+     /*         ctrl      alt              space              fn               space              alt      ctrl              left     down     right  */
+               KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS,          KC_TRNS,          KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS
     )
 };
 

keyboards/bastardkb/scylla/keymaps/cykedev/config.h

@@ -0,0 +1,42 @@
+// Copyright 2021 Christian Eiden, cykedev
+//
+// This program is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+#pragma once
+
+// Select hand configuration
+// #define MASTER_LEFT
+// #define MASTER_RIGHT
+#define EE_HANDS
+
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 0
+
+#define BOOTMAGIC_LITE_ROW_RIGHT 0
+#define BOOTMAGIC_LITE_COLUMN_RIGHT 5
+
+#define TAPPING_TERM 200
+
+// Prevent normal rollover on alphas from accidentally triggering mods.
+// #define IGNORE_MOD_TAP_INTERRUPT
+
+// Enable rapid switch from tap to hold, disables double tap hold auto-repeat.
+// #define TAPPING_FORCE_HOLD
+
+// Apply the modifier on keys that are tapped during a short hold of a modtap
+// #define PERMISSIVE_HOLD
+
+#define IGNORE_MOD_TAP_INTERRUPT_PER_KEY
+
+#define FORCE_NKRO

keyboards/bastardkb/scylla/keymaps/cykedev/keymap.c

@@ -0,0 +1,198 @@
+// Copyright 2021 Christian Eiden, cykedev
+//
+// This program is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+#include QMK_KEYBOARD_H
+
+#define CM_SPAL  LGUI_T(KC_SPC)
+#define CM_SPAR  RGUI_T(KC_SPC)
+
+#define SH_ENL  LSFT_T(KC_ENT)
+#define SH_ENR  RSFT_T(KC_ENT)
+
+#define RAISE   MO(_RAISE)
+#define LOWER   MO(_LOWER)
+
+#define QWERT   DF(_QWERTY)
+#define COLEM   DF(_COLEMAK_DH)
+
+enum layer_names {
+  _COLEMAK_DH,
+  _QWERTY,
+  _RAISE,
+  _LOWER,
+  _ADJUST
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_COLEMAK_DH] = LAYOUT_split_4x6_5(
+  /* COLEMAK_DH
+   * .-----------------------------------------.                                  .-----------------------------------------.
+   * | Esc  |   1  |   2  |   3  |   4  |   5  |                                  |   6  |   7  |   8  |   9  |   0  |  Bsp |
+   * |------+------+------+------+------+------|                                  |------+------+------+------+------+------|
+   * | Tab  |   Q  |   W  |   F  |   P  |   B  |                                  |   J  |   L  |   U  |   Y  |   ;  |  \   |
+   * |------+------+------+------+------+------|                                  |------+------+------+------+------+------|
+   * | Del  |   A  |   R  |   S  |   T  |   G  |                                  |   M  |   N  |   E  |   I  |   O  |  '   |
+   * |------+------+------+------+------+------|                                  |------+------+------+------+------+------|
+   * | Shft |   Z  |   X  |   C  |   D  |   V  |                                  |   K  |   H  |   ,  |   .  |   /  | Shft |
+   * '-----------------------------------------/                                  \-----------------------------------------'
+   *                                  / RAISE /---------------.    .---------------\ LOWER \
+   *                                 /       /  Cmd  / Shift /      \ Shift \  Cmd  \       \
+   *                                '-------/ Space / Enter /        \ Enter \ Space \-------'
+   *                                       /---------------/          \---------------\
+   *                                      /  Alt  / Ctrl  /            \  Ctrl \  Alt  \
+   *                                     /       /       /              \       \       \
+   *                                    '---------------'                '---------------'
+   */
+   KC_ESC , KC_1   , KC_2   , KC_3   , KC_4   , KC_5   ,                                     KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_BSPC,
+   KC_TAB , KC_Q   , KC_W   , KC_F   , KC_P   , KC_B   ,                                     KC_J   , KC_L   , KC_U   , KC_Y   , KC_SCLN, KC_BSLS,
+   KC_DEL , KC_A   , KC_R   , KC_S   , KC_T   , KC_G   ,                                     KC_M   , KC_N   , KC_E   , KC_I   , KC_O   , KC_QUOT,
+   KC_LSFT, KC_Z   , KC_X   , KC_C   , KC_D   , KC_V   ,                                     KC_K   , KC_H   , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT,
+                                                RAISE  , CM_SPAL, SH_ENL , SH_ENR , CM_SPAR, LOWER  ,
+                                                         KC_LALT, KC_LCTL, KC_RCTL, KC_RALT
+   ),
+  [_QWERTY] = LAYOUT_split_4x6_5(
+  /* QWERTY
+   * .-----------------------------------------.                                  .-----------------------------------------.
+   * | Esc  |   1  |   2  |   3  |   4  |   5  |                                  |   6  |   7  |   8  |   9  |   0  |  Bsp |
+   * |------+------+------+------+------+------|                                  |------+------+------+------+------+------|
+   * | Tab  |   Q  |   W  |   E  |   R  |   T  |                                  |   Y  |   U  |   I  |   O  |   P  |  \   |
+   * |------+------+------+------+------+------|                                  |------+------+------+------+------+------|
+   * | Del  |   A  |   S  |   D  |   F  |   G  |                                  |   H  |   J  |   K  |   L  |   ;  |  '   |
+   * |------+------+------+------+------+------|                                  |------+------+------+------+------+------|
+   * | Shft |   Z  |   X  |   C  |   V  |   B  |                                  |   N  |   M  |   ,  |   .  |   /  | Shft |
+   * '-----------------------------------------/                                  \-----------------------------------------'
+   *                                  / RAISE /---------------.    .---------------\ LOWER \
+   *                                 /       /  Cmd  / Shift /      \ Shift \  Cmd  \       \
+   *                                '-------/ Space / Enter /        \ Enter \ Space \-------'
+   *                                       /---------------/          \---------------\
+   *                                      /  Alt  / Ctrl  /            \  Ctrl \  Alt  \
+   *                                     /       /       /              \       \       \
+   *                                    '---------------'                '---------------'
+   */
+   KC_ESC , KC_1   , KC_2   , KC_3   , KC_4   , KC_5   ,                                     KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_BSPC,
+   KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   ,                                     KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_BSLS,
+   KC_DEL , KC_A   , KC_S   , KC_D   , KC_F   , KC_G   ,                                     KC_H   , KC_J   , KC_K   , KC_L   , KC_SCLN, KC_QUOT,
+   KC_LSFT, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   ,                                     KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_LSFT,
+                                                RAISE  , CM_SPAL, SH_ENL , SH_ENR , CM_SPAR, LOWER  ,
+                                                         KC_LALT, KC_LCTL, KC_RCTL, KC_RALT
+   ),
+   [_RAISE] = LAYOUT_split_4x6_5(
+  /* RAISE
+   * .-----------------------------------------.                                  .-----------------------------------------.
+   * |      |  F1  |  F2  |  F3  |  F4  |  F5  |                                  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |
+   * |------+------+------+------+------+------|                                  |------+------+------+------+------+------|
+   * |      |      |      |   [  |   ]  |      |                                  |   $  |   /  |  *   |  #   |   ~  |  F12 |
+   * |------+------+------+------+------+------|                                  |------+------+------+------+------+------|
+   * |  Ins |  !   |  @   |   (  |   )  |      |                                  |   %  |   -  |  +   |  =   |  ?   |      |
+   * |------+------+------+------+------+------|                                  |------+------+------+------+------+------|
+   * |      |      |      |   {  |   }  |      |                                  |   ^  |   &  |  |   |      |      |      |
+   * '-----------------------------------------/                                  \-----------------------------------------'
+   *                                  /       /---------------.    .---------------\       \
+   *                                 /       /       /       /      \       \       \       \
+   *                                '-------/       /       /        \       \       \-------'
+   *                                       /---------------/          \---------------\
+   *                                      /       /       /            \       \       \
+   *                                     /       /       /              \       \       \
+   *                                    '---------------'                '---------------'
+   */
+   XXXXXXX, KC_F1  , KC_F2  , KC_F3  , KC_F4  , KC_F5  ,                                     KC_F6  , KC_F7  , KC_F8  , KC_F9  , KC_F10 , KC_F11 ,
+   XXXXXXX, XXXXXXX, XXXXXXX, KC_LBRC, KC_RBRC, XXXXXXX,                                     KC_DLR , KC_SLSH, KC_ASTR, KC_HASH, KC_TILD, KC_F12 ,
+   KC_INS , KC_EXLM, KC_AT  , KC_LPRN, KC_RPRN, XXXXXXX,                                     KC_PERC, KC_MINS, KC_PPLS, KC_PEQL, KC_QUES, XXXXXXX,
+   XXXXXXX, XXXXXXX, XXXXXXX, KC_LCBR, KC_RCBR, XXXXXXX,                                     KC_CIRC, KC_AMPR, KC_PIPE, XXXXXXX, XXXXXXX, XXXXXXX,
+                                                _______, _______, _______, _______, _______, _______,
+                                                         _______, _______, _______, _______
+   ),
+  [_LOWER] = LAYOUT_split_4x6_5(
+  /* LOWER
+   * .-----------------------------------------.                                  .-----------------------------------------.
+   * |      |  F1  |  F2  |  F3  |  F4  |  F5  |                                  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |
+   * |------+------+------+------+------+------|                                  |------+------+------+------+------+------|
+   * |      |      |      |   [  |   ]  |  +   |                                  |      |      |  up  |      |      |  F12 |
+   * |------+------+------+------+------+------|                                  |------+------+------+------+------+------|
+   * |  Ins |  !   |  @   |   (  |   )  |  -   |                                  |      | left | down | rght |  ?   |      |
+   * |------+------+------+------+------+------|                                  |------+------+------+------+------+------|
+   * |      |      |      |   {  |   }  |  =   |                                  |      |      |      |      |      |      |
+   * '-----------------------------------------/                                  \-----------------------------------------'
+   *                                  /       /---------------.    .---------------\       \
+   *                                 /       /       /       /      \       \       \       \
+   *                                '-------/       /       /        \       \       \-------'
+   *                                       /---------------/          \---------------\
+   *                                      /       /       /            \       \       \
+   *                                     /       /       /              \       \       \
+   *                                    '---------------'                '---------------'
+   */
+   XXXXXXX, KC_F1  , KC_F2  , KC_F3  , KC_F4  , KC_F5  ,                                     KC_F6  , KC_F7  , KC_F8  , KC_F9  , KC_F10 , KC_F11 ,
+   XXXXXXX, XXXXXXX, XXXXXXX, KC_LBRC, KC_RBRC, KC_PPLS,                                     XXXXXXX, XXXXXXX, KC_UP  , XXXXXXX, XXXXXXX, KC_F12 ,
+   KC_INS , KC_EXLM, KC_AT  , KC_LPRN, KC_RPRN, KC_MINS,                                     XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_QUES, XXXXXXX,
+   XXXXXXX, XXXXXXX, XXXXXXX, KC_LCBR, KC_RCBR, KC_PEQL,                                     XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+                                                _______, _______, _______, _______, _______, _______,
+                                                         _______, _______, _______, _______
+   ),
+  [_ADJUST] = LAYOUT_split_4x6_5(
+  /* ADJUST
+   * .-----------------------------------------.                                  .-----------------------------------------.
+   * |      |      |      |      |      | QWERT|                                  |COLEM |      |      |      |      |      |
+   * |------+------+------+------+------+------|                                  |------+------+------+------+------+------|
+   * |      |      |      |      |      |  V+  |                                  |  B + |      |      |      |      |      |
+   * |------+------+------+------+------+------|                                  |------+------+------+------+------+------|
+   * |      |      |      |      |      |  V-  |                                  |  B - |  <<  | play |  >>  |      |      |
+   * |------+------+------+------+------+------|                                  |------+------+------+------+------+------|
+   * |      |      |      |      |      | Mute |                                  |      |      |      |      |      |      |
+   * '-----------------------------------------/                                  \-----------------------------------------'
+   *                                  /       /---------------.    .---------------\       \
+   *                                 /       /       /       /      \       \       \       \
+   *                                '-------/       /       /        \       \       \-------'
+   *                                       /---------------/          \---------------\
+   *                                      /       /       /            \       \       \
+   *                                     /       /       /              \       \       \
+   *                                    '---------------'                '---------------'
+   */
+   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, QWERT  ,                                     COLEM  , XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLU,                                     KC_BRIU, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLD,                                     KC_BRID, KC_MRWD, KC_MPLY, KC_MFFD, XXXXXXX, XXXXXXX,
+   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MUTE,                                     XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+                                                XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+                                                         XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
+   )
+};
+
+bool get_ignore_mod_tap_interrupt(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case CM_SPAR:
+      return true;
+    default:
+      return false;
+  }
+}
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+
+// Flexible macOS-friendly Grave Escape
+// https://docs.qmk.fm/#/feature_key_overrides?id=flexible-macos-friendly-grave-escape
+
+const key_override_t tilde_esc_override = ko_make_basic(MOD_MASK_SHIFT, KC_ESC, S(KC_GRAVE));
+const key_override_t grave_esc_override = ko_make_basic(MOD_MASK_GUI, KC_ESC, KC_GRAVE);
+const key_override_t delete_key_override = ko_make_basic(MOD_MASK_SHIFT, KC_BSPACE, KC_DELETE);
+
+
+const key_override_t **key_overrides = (const key_override_t *[]){
+    &tilde_esc_override,
+    &grave_esc_override,
+    &delete_key_override,
+    NULL
+};

keyboards/bastardkb/scylla/keymaps/cykedev/rules.mk

@@ -0,0 +1,4 @@
+MOUSEKEY_ENABLE     = no      # Mouse keys
+NKRO_ENABLE         = yes     # USB Nkey Rollover
+RGB_MATRIX_ENABLE   = no      # Enable keyboard RGB matrix
+KEY_OVERRIDE_ENABLE = yes     # Enable Key Overrides, see https://docs.qmk.fm/#/feature_key_overrides

keyboards/bigseries/1key/keymaps/default/keymap.c

@@ -39,9 +39,6 @@ void matrix_init_user(void) {
     }
 }
 
-void matrix_scan_user(void) {
-}
-
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   switch (keycode) {
   case KC_A:
@@ -53,37 +50,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   }
   return true;
 }
-
-void led_set_user(uint8_t usb_led) {
-
-  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_KANA)) {
-
-  } else {
-
-  }
-
-}

keyboards/bigseries/1key/keymaps/tester/keymap.c

@@ -42,9 +42,6 @@ void matrix_init_user(void) {
     }
 }
 
-void matrix_scan_user(void) {
-}
-
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   switch (keycode) {
   case KC_A:
@@ -56,37 +53,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   }
   return true;
 }
-
-void led_set_user(uint8_t usb_led) {
-
-  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_KANA)) {
-
-  } else {
-
-  }
-
-}

keyboards/bigseries/2key/keymaps/default/keymap.c

@@ -40,44 +40,3 @@ void matrix_init_user(void) {
     initialized = 1;
   }
 }
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_KANA)) {
-
-  } else {
-
-  }
-
-}

keyboards/bigseries/2key/keymaps/lock/keymap.c

@@ -42,44 +42,3 @@ void matrix_init_user(void) {
       initialized = 1;
     }
 }
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_KANA)) {
-
-  } else {
-
-  }
-
-}

keyboards/bigseries/2key/keymaps/tester/keymap.c

@@ -41,44 +41,3 @@ void matrix_init_user(void) {
       initialized = 1;
     }
 }
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_KANA)) {
-
-  } else {
-
-  }
-
-}

keyboards/bigseries/3key/keymaps/default/keymap.c

@@ -41,9 +41,6 @@ void matrix_init_user(void) {
     }
 }
 
-void matrix_scan_user(void) {
-}
-
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   switch (keycode) {
   case KC_A:
@@ -55,37 +52,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   }
   return true;
 }
-
-void led_set_user(uint8_t usb_led) {
-
-  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_KANA)) {
-
-  } else {
-
-  }
-
-}

keyboards/bigseries/3key/keymaps/tester/keymap.c

@@ -41,44 +41,3 @@ void matrix_init_user(void) {
       initialized = 1;
     }
 }
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_KANA)) {
-
-  } else {
-
-  }
-
-}

keyboards/bigseries/4key/4key.c

@@ -15,9 +15,3 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include "4key.h"
-
-void matrix_scan_kb(void) {
-  // Looping keyboard code goes here
-  // This runs every cycle (a lot)
-  matrix_scan_user();
-};

keyboards/bigseries/4key/keymaps/default/keymap.c

@@ -40,46 +40,9 @@ void matrix_init_user(void) {
     }
 }
 
-void matrix_scan_user(void) {
-}
-
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   if (record->event.pressed) {
     rgblight_step();
   }
   return true;
 }
-
-void led_set_user(uint8_t usb_led) {
-
-  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_KANA)) {
-
-  } else {
-
-  }
-
-}

keyboards/bigseries/4key/keymaps/tester/keymap.c

@@ -41,44 +41,3 @@ void matrix_init_user(void) {
       initialized = 1;
     }
 }
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_KANA)) {
-
-  } else {
-
-  }
-
-}

keyboards/blockey/keymaps/default/keymap.c

@@ -37,19 +37,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ),
 
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/boardsource/technik_o/rules.mk

@@ -8,8 +8,8 @@ BOOTLOADER = atmel-dfu
 #   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = lite     # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no       # Mouse keys
-EXTRAKEY_ENABLE = no       # Audio control and System control
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE

keyboards/boardsource/technik_s/rules.mk

@@ -8,8 +8,8 @@ BOOTLOADER = atmel-dfu
 #   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = lite     # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no       # Mouse keys
-EXTRAKEY_ENABLE = no       # Audio control and System control
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE

keyboards/boston_meetup/2019/keymaps/default/keymap.c

@@ -156,10 +156,3 @@ bool music_mask_user(uint16_t keycode) {
       return true;
   }
 }
-
-void matrix_init_user(void) {
-}
-
-
-void matrix_scan_user(void) {
-}

keyboards/bpiphany/kitten_paw/keymaps/default/keymap.c

@@ -13,19 +13,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       KC_LSFT,KC_NUBS,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,KC_COMM, KC_DOT,KC_SLSH,        KC_RSFT,            KC_UP,            KC_P1,  KC_P2,  KC_P3,KC_PENT, \
       KC_LCTL,KC_LGUI,KC_LALT,                 KC_SPC,                                KC_RALT,KC_RGUI, KC_APP,KC_RCTL,  KC_LEFT,KC_DOWN,KC_RGHT,    KC_P0,KC_PDOT)
 };
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/bpiphany/pegasushoof/2013/2013.c

@@ -23,37 +23,3 @@ extern inline void ph_caps_led_off(void);
 
 extern inline void ph_sclk_led_on(void);
 extern inline void ph_sclk_led_off(void);
-
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-};
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-__attribute__ ((weak))
-bool process_action_user(keyrecord_t *record) {
-    return true;
-}
-
-__attribute__ ((weak))
-void led_set_user(uint8_t usb_led) {
-}
-
-void matrix_init_kb(void) {
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	matrix_scan_user();
-}
-
-bool process_action_kb(keyrecord_t *record) {
-	return process_action_user(record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	led_set_user(usb_led);
-}

keyboards/bpiphany/pegasushoof/2015/2015.c

@@ -23,36 +23,3 @@ extern inline void ph_caps_led_off(void);
 
 extern inline void ph_sclk_led_on(void);
 extern inline void ph_sclk_led_off(void);
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-};
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-__attribute__ ((weak))
-bool process_action_user(keyrecord_t *record) {
-    return true;
-}
-
-__attribute__ ((weak))
-void led_set_user(uint8_t usb_led) {
-}
-
-void matrix_init_kb(void) {
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	matrix_scan_user();
-}
-
-bool process_action_kb(keyrecord_t *record) {
-	return process_action_user(record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	led_set_user(usb_led);
-}

keyboards/bpiphany/pegasushoof/2015/matrix.c

@@ -33,6 +33,18 @@ static matrix_row_t matrix_debouncing[MATRIX_ROWS];
 static matrix_row_t read_cols(void);
 static void select_row(uint8_t col);
 
+// user-defined overridable functions
+
+__attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); }
+
+__attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); }
+
+__attribute__((weak)) void matrix_init_user(void) {}
+
+__attribute__((weak)) void matrix_scan_user(void) {}
+
+// helper functions
+
 inline uint8_t matrix_rows(void)
 {
   return MATRIX_ROWS;

keyboards/bpiphany/sixshooter/sixshooter.c

@@ -16,23 +16,3 @@ extern inline void sixshooter_led_5_off(void);
 
 extern inline void sixshooter_led_all_on(void);
 extern inline void sixshooter_led_all_off(void);
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/bpiphany/unloved_bastard/keymaps/default_ansi/keymap.c

@@ -24,19 +24,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                  KC_LSFT,        KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,          KC_RSFT,            KC_UP, \
                  KC_LCTL,KC_LGUI,KC_LALT,                KC_SPC,                                 KC_RALT,KC_RGUI, KC_APP,  KC_RCTL,   KC_LEFT, KC_DOWN, KC_RGHT  )
 };
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/bpiphany/unloved_bastard/keymaps/default_iso/keymap.c

@@ -24,19 +24,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                  KC_LSFT,KC_NUBS,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,          KC_RSFT,            KC_UP, \
                  KC_LCTL,KC_LGUI,KC_LALT,                KC_SPC,                                 KC_RALT,KC_RGUI, KC_APP,  KC_RCTL,   KC_LEFT, KC_DOWN, KC_RGHT  )
 };
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/bthlabs/geekpad/geekpad.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "geekpad.h"
-
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-
-    matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-    // put your looping keyboard code here
-    // runs every cycle (a lot)
-
-    matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-    // put your per-action keyboard code here
-    // runs for every action, just before processing by the firmware
-
-    return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-    led_set_user(usb_led);
-}

keyboards/business_card/alpha/alpha.c

@@ -14,38 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "alpha.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/