Fix out of bound OLED font access (#8145)

* Fix out of bound OLED font access

The default font is 1344 bytes, or a total of 224 glyphs (each 6-bytes wide).
OLED_FONT_END defaults to 224, which if used will then index off the end of
the font array. So either the documentation or code is wrong.

Instead of figuring out the rewording of the documentation, just change
the OLED_FONT_END default value to 223, to match the documentation and code.

* Add static assert to check array size

Build bomb if the font array size doesn't match to the defines.

.github/workflows/cli.yml

@@ -0,0 +1,28 @@
+name: CLI CI
+
+on:
+  push:
+    branches:
+    - master
+    - future
+  pull_request:
+    paths:
+    - 'lib/python/**'
+    - 'bin/qmk'
+    - 'requirements.txt'
+    - '.github/workflows/cli.yml'
+
+jobs:
+  test:
+    runs-on: ubuntu-latest
+
+    container: qmkfm/base_container
+
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        submodules: recursive
+    - name: Install dependencies
+      run: pip3 install -r requirements.txt
+    - name: Run tests
+      run: bin/qmk pytest

.gitignore

@@ -63,9 +63,6 @@ util/Win_Check_Output.txt
 *.gif
 *.jpg
 
-# Do not ignore MiniDox left/right hand eeprom files
-!keyboards/minidox/*.eep
-
 # things travis sees
 secrets.tar
 id_rsa_*

.travis.yml

@@ -12,6 +12,18 @@ env:
   - MAKEFLAGS="-j3 --output-sync"
 services:
   - docker
+addons:
+  apt:
+    sources:
+      - ubuntu-toolchain-r-test
+      - llvm-toolchain-trusty-7
+    packages:
+    - pandoc
+    - diffutils
+    - dos2unix
+    - doxygen
+    - clang-format-7
+    - libstdc++-7-dev
 install:
   - npm install -g moxygen
 script:
@@ -20,13 +32,6 @@ script:
   - bash util/travis_test.sh
   - bash util/travis_build.sh
   - bash util/travis_docs.sh
-addons:
-  apt:
-    packages:
-    - pandoc
-    - diffutils
-    - dos2unix
-    - doxygen
 after_script:
   bash util/travis_compiled_push.sh
 notifications:

common_features.mk

@@ -61,7 +61,7 @@ endif
 
 ifeq ($(strip $(STENO_ENABLE)), yes)
     OPT_DEFS += -DSTENO_ENABLE
-    VIRTSER_ENABLE := yes
+    VIRTSER_ENABLE ?= yes
     SRC += $(QUANTUM_DIR)/process_keycode/process_steno.c
 endif
 
@@ -102,6 +102,57 @@ ifeq ($(strip $(UNICODE_COMMON)), yes)
     SRC += $(QUANTUM_DIR)/process_keycode/process_unicode_common.c
 endif
 
+VALID_EEPROM_DRIVER_TYPES := vendor custom transient i2c
+EEPROM_DRIVER ?= vendor
+ifeq ($(filter $(EEPROM_DRIVER),$(VALID_EEPROM_DRIVER_TYPES)),)
+  $(error EEPROM_DRIVER="$(EEPROM_DRIVER)" is not a valid EEPROM driver)
+else
+  OPT_DEFS += -DEEPROM_ENABLE
+  ifeq ($(strip $(EEPROM_DRIVER)), custom)
+    OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_CUSTOM
+    COMMON_VPATH += $(DRIVER_PATH)/eeprom
+    SRC += eeprom_driver.c
+  else ifeq ($(strip $(EEPROM_DRIVER)), i2c)
+    OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_I2C
+    COMMON_VPATH += $(DRIVER_PATH)/eeprom
+    QUANTUM_LIB_SRC += i2c_master.c
+    SRC += eeprom_driver.c eeprom_i2c.c
+  else ifeq ($(strip $(EEPROM_DRIVER)), transient)
+    OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_TRANSIENT
+    COMMON_VPATH += $(DRIVER_PATH)/eeprom
+    SRC += eeprom_driver.c eeprom_transient.c
+  else ifeq ($(strip $(EEPROM_DRIVER)), vendor)
+    OPT_DEFS += -DEEPROM_VENDOR
+    ifeq ($(PLATFORM),AVR)
+      # Automatically provided by avr-libc, nothing required
+    else ifeq ($(PLATFORM),CHIBIOS)
+      ifeq ($(MCU_SERIES), STM32F3xx)
+        SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c
+        SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c
+        OPT_DEFS += -DEEPROM_EMU_STM32F303xC
+        OPT_DEFS += -DSTM32_EEPROM_ENABLE
+      else ifeq ($(MCU_SERIES), STM32F1xx)
+        SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c
+        SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c
+        OPT_DEFS += -DEEPROM_EMU_STM32F103xB
+        OPT_DEFS += -DSTM32_EEPROM_ENABLE
+      else ifeq ($(MCU_SERIES)_$(MCU_LDSCRIPT), STM32F0xx_STM32F072xB)
+        SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c
+        SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c
+        OPT_DEFS += -DEEPROM_EMU_STM32F072xB
+        OPT_DEFS += -DSTM32_EEPROM_ENABLE
+      else
+        # This will effectively work the same as "transient" if not supported by the chip
+        SRC += $(PLATFORM_COMMON_DIR)/eeprom_teensy.c
+      endif
+    else ifeq ($(PLATFORM),ARM_ATSAM)
+      SRC += $(PLATFORM_COMMON_DIR)/eeprom.c
+    else ifeq ($(PLATFORM),TEST)
+      SRC += $(PLATFORM_COMMON_DIR)/eeprom.c
+    endif
+  endif
+endif
+
 ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
     POST_CONFIG_H += $(QUANTUM_DIR)/rgblight_post_config.h
     OPT_DEFS += -DRGBLIGHT_ENABLE
@@ -124,7 +175,9 @@ ifneq ($(strip $(LED_MATRIX_ENABLE)), no)
     ifeq ($(filter $(LED_MATRIX_ENABLE),$(VALID_MATRIX_TYPES)),)
         $(error LED_MATRIX_ENABLE="$(LED_MATRIX_ENABLE)" is not a valid matrix type)
     else
-        OPT_DEFS += -DLED_MATRIX_ENABLE -DBACKLIGHT_ENABLE -DBACKLIGHT_CUSTOM_DRIVER
+        BACKLIGHT_ENABLE = yes
+        BACKLIGHT_DRIVER = custom
+        OPT_DEFS += -DLED_MATRIX_ENABLE
         SRC += $(QUANTUM_DIR)/led_matrix.c
         SRC += $(QUANTUM_DIR)/led_matrix_drivers.c
     endif
@@ -249,21 +302,15 @@ ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
         $(error BACKLIGHT_DRIVER="$(BACKLIGHT_DRIVER)" is not a valid backlight type)
     endif
 
-    ifeq ($(strip $(VISUALIZER_ENABLE)), yes)
-        CIE1931_CURVE := yes
-    endif
-
     COMMON_VPATH += $(QUANTUM_DIR)/backlight
     SRC += $(QUANTUM_DIR)/backlight/backlight.c
     OPT_DEFS += -DBACKLIGHT_ENABLE
 
-    ifeq ($(strip $(BACKLIGHT_DRIVER)), software)
+    ifeq ($(strip $(BACKLIGHT_DRIVER)), custom)
+        OPT_DEFS += -DBACKLIGHT_CUSTOM_DRIVER
+    else ifeq ($(strip $(BACKLIGHT_DRIVER)), software)
         SRC += $(QUANTUM_DIR)/backlight/backlight_soft.c
     else
-        ifeq ($(strip $(BACKLIGHT_DRIVER)), custom)
-            OPT_DEFS += -DBACKLIGHT_CUSTOM_DRIVER
-        endif
-
         ifeq ($(PLATFORM),AVR)
             SRC += $(QUANTUM_DIR)/backlight/backlight_avr.c
         else
@@ -280,6 +327,8 @@ ifeq ($(strip $(WS2812_DRIVER_REQUIRED)), yes)
         $(error WS2812_DRIVER="$(WS2812_DRIVER)" is not a valid WS2812 driver)
     endif
 
+    OPT_DEFS += -DWS2812_DRIVER_$(strip $(shell echo $(WS2812_DRIVER) | tr '[:lower:]' '[:upper:]'))
+
     ifeq ($(strip $(WS2812_DRIVER)), bitbang)
         SRC += ws2812.c
     else
@@ -292,6 +341,10 @@ ifeq ($(strip $(WS2812_DRIVER_REQUIRED)), yes)
     endif
 endif
 
+ifeq ($(strip $(VISUALIZER_ENABLE)), yes)
+    CIE1931_CURVE := yes
+endif
+
 ifeq ($(strip $(CIE1931_CURVE)), yes)
     OPT_DEFS += -DUSE_CIE1931_CURVE
     LED_TABLES := yes
@@ -367,6 +420,12 @@ ifeq ($(strip $(LEADER_ENABLE)), yes)
   OPT_DEFS += -DLEADER_ENABLE
 endif
 
+
+ifeq ($(strip $(DIP_SWITCH_ENABLE)), yes)
+  SRC += $(QUANTUM_DIR)/dip_switch.c
+  OPT_DEFS += -DDIP_SWITCH_ENABLE
+endif
+
 include $(DRIVER_PATH)/qwiic/qwiic.mk
 
 QUANTUM_SRC:= \
@@ -374,12 +433,28 @@ QUANTUM_SRC:= \
     $(QUANTUM_DIR)/keymap_common.c \
     $(QUANTUM_DIR)/keycode_config.c
 
-# Include the standard or split matrix code if needed
+
+
+VALID_CUSTOM_MATRIX_TYPES:= yes lite no
+
+CUSTOM_MATRIX ?= no
+
 ifneq ($(strip $(CUSTOM_MATRIX)), yes)
-    ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
-        QUANTUM_SRC += $(QUANTUM_DIR)/split_common/matrix.c
-    else
-        QUANTUM_SRC += $(QUANTUM_DIR)/matrix.c
+    ifeq ($(filter $(CUSTOM_MATRIX),$(VALID_CUSTOM_MATRIX_TYPES)),)
+        $(error CUSTOM_MATRIX="$(CUSTOM_MATRIX)" is not a valid custom matrix type)
+    endif
+
+    # Include common stuff for all non custom matrix users
+    QUANTUM_SRC += $(QUANTUM_DIR)/matrix_common.c
+
+    # if 'lite' then skip the actual matrix implementation
+    ifneq ($(strip $(CUSTOM_MATRIX)), lite)
+        # Include the standard or split matrix code if needed
+        ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
+            QUANTUM_SRC += $(QUANTUM_DIR)/split_common/matrix.c
+        else
+            QUANTUM_SRC += $(QUANTUM_DIR)/matrix.c
+        endif
     endif
 endif
 
@@ -402,9 +477,17 @@ ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
         QUANTUM_SRC += $(QUANTUM_DIR)/split_common/transport.c
         # Functions added via QUANTUM_LIB_SRC are only included in the final binary if they're called.
         # Unused functions are pruned away, which is why we can add multiple drivers here without bloat.
-        QUANTUM_LIB_SRC += $(QUANTUM_DIR)/split_common/serial.c \
-                           i2c_master.c \
-                           i2c_slave.c
+        ifeq ($(PLATFORM),AVR)
+            QUANTUM_LIB_SRC += i2c_master.c \
+                               i2c_slave.c
+        endif
+
+        SERIAL_DRIVER ?= bitbang
+        ifeq ($(strip $(SERIAL_DRIVER)), bitbang)
+            QUANTUM_LIB_SRC += serial.c
+        else
+            QUANTUM_LIB_SRC += serial_$(strip $(SERIAL_DRIVER)).c
+        endif
     endif
     COMMON_VPATH += $(QUANTUM_PATH)/split_common
 endif
@@ -428,12 +511,13 @@ ifeq ($(strip $(MAGIC_ENABLE)), yes)
     OPT_DEFS += -DMAGIC_KEYCODE_ENABLE
 endif
 
+GRAVE_ESC_ENABLE ?= yes
+ifeq ($(strip $(GRAVE_ESC_ENABLE)), yes)
+    SRC += $(QUANTUM_DIR)/process_keycode/process_grave_esc.c
+    OPT_DEFS += -DGRAVE_ESC_ENABLE
+endif
+
 ifeq ($(strip $(DYNAMIC_MACRO_ENABLE)), yes)
     SRC += $(QUANTUM_DIR)/process_keycode/process_dynamic_macro.c
     OPT_DEFS += -DDYNAMIC_MACRO_ENABLE
 endif
-
-ifeq ($(strip $(DIP_SWITCH_ENABLE)), yes)
-  SRC += $(QUANTUM_DIR)/dip_switch.c
-  OPT_DEFS += -DDIP_SWITCH_ENABLE
-endif

docs/_summary.md

@@ -18,6 +18,7 @@
   * [Getting Help](getting_started_getting_help.md)
 
 * [Breaking Changes](breaking_changes.md)
+  * [My Pull Request Was Flagged](breaking_changes_instructions.md)
   * [2019 Aug 30](ChangeLog/20190830.md)
 
 * [FAQ](faq.md)
@@ -104,7 +105,9 @@
   * [ADC Driver](adc_driver.md)
   * [I2C Driver](i2c_driver.md)
   * [WS2812 Driver](ws2812_driver.md)
+  * [EEPROM Driver](eeprom_driver.md)
   * [GPIO Controls](internals_gpio_control.md)
+  * [Custom Matrix](custom_matrix.md)
   * [Proton C Conversion](proton_c_conversion.md)
 
 * For a Deeper Understanding

docs/breaking_changes.md

@@ -10,16 +10,16 @@ The breaking change period is when we will merge PR's that change QMK in dangero
 
 ## When is the next Breaking Change?
 
-The next Breaking Change is scheduled for Nov 29.
+The next Breaking Change is scheduled for February 29, 2020.
 
 ### Important Dates
 
 * [x] 2019 Sep 21 - `future` is created. It will be rebased weekly.
-* [ ] 2019 Nov 01 - `future` closed to new PR's.
-* [ ] 2019 Nov 01 - Call for testers.
-* [ ] 2019 Nov 27 - `master` is locked, no PR's merged.
-* [ ] 2019 Nov 29 - Merge `future` to `master`.
-* [ ] 2019 Nov 30 - `master` is unlocked. PR's can be merged again.
+* [x] 2020 Feb 1 - `future` closed to new PR's.
+* [x] 2020 Feb 1 - Call for testers.
+* [ ] 2020 Feb 26 - `master` is locked, no PR's merged.
+* [ ] 2020 Feb 28 - Merge `future` to `master`.
+* [ ] 2020 Feb 29 - `master` is unlocked. PR's can be merged again.
 
 ## What changes will be included?
 

docs/breaking_changes_instructions.md

@@ -0,0 +1,42 @@
+# Breaking Changes: My Pull Request Was Flagged
+
+A QMK member may have replied to your pull request stating that your submission is a breaking change. In their judgment, the changes you have proposed have greater implications for either QMK, or its users.
+
+Some things that may cause a pull request to be flagged are:
+
+- **Edits to User Keymaps**
+  A user may submit their keymap to QMK, then some time later open a pull request with further updates, only to find it can't be merged because it was edited in the `qmk/qmk_firmware` repository. As not all users are proficient at using Git or GitHub, the user may find themself unable to fix the issue on their own.
+- **Changes to Expected Behavior**
+  Changes to QMK behavior may cause users to believe their hardware or QMK is broken if they flash new firmware that incorporates changes to existing QMK features, and find themselves without a means to restore the desired behavior.
+- **Changes Requiring User Action**
+  Changes may also require action to be taken by users, such as updating a toolchain or taking some action in Git.
+- **Changes Necessitating Increased Scrutiny**
+  On occasion, a submission may have implications for QMK as a project. This could be copyright/licensing issues, coding conventions, large feature overhauls, "high-risk" changes that need wider testing by our community, or something else entirely.
+- **Changes Requiring Communication to End Users**
+  This includes warnings about future deprecations, outdated practices, and anything else that needs to be communicated but doesn't fit into one of the above categories.
+
+## What Do I Do?
+
+If it is determined that your submission is a breaking change, there are a few things you can do to smooth the process:
+
+### Consider Splitting Up Your PR
+
+If you are contributing core code, and the only reason it needs to go through breaking changes is that you are updating keymaps to match your change, consider whether you can submit your feature in a way that the old keymaps continue to work. Then submit a separate PR that goes through the breaking changes process to remove the old code.
+
+### Contribute a ChangeLog Entry
+
+We require submissions that go through the Breaking Change process to include a changelog entry. The entry should be a short summary of the changes your pull request makes – [each section here started as a changelog](ChangeLog/20190830.md "n.b. This should link to the 2019 Aug 30 Breaking Changes doc  - @noroadsleft").
+
+Your changelog should be located at `docs/ChangeLog/YYYYMMDD/PR####.md`, where `YYYYMMDD` is the date on which QMK's breaking change branch – usually named `future` – will be merged into the `master` branch, and `####` is the number of your pull request.
+
+If your submission requires action on the part of users, your changelog should instruct users what action(s) must be taken, or link to a location that does so.
+
+### Document Your Changes
+
+Understanding the purpose for your submission, and possible implications or actions it will require can make the review process more straightforward. A changelog may suffice for this purpose, but more extensive changes may require a level of detail that is ill-suited for a changelog.
+
+Commenting on your pull request and being responsive to questions, comments, and change requests is much appreciated.
+
+### Ask for Help
+
+Having your submission flagged may have caught you off guard. If you find yourself intimidated or overwhelmed, let us know. Comment on your pull request, or [reach out to the QMK team on Discord](https://discord.gg/Uq7gcHh).

docs/cli.md

@@ -81,7 +81,7 @@ qmk cformat [file1] [file2] [...] [fileN]
 
 ## `qmk compile`
 
-This command allows you to compile firmware from any directory. You can compile JSON exports from <https://config.qmk.fm> or compile keymaps in the repo.
+This command allows you to compile firmware from any directory. You can compile JSON exports from <https://config.qmk.fm>, compile keymaps in the repo, or compile the keyboard in the current working directory.
 
 **Usage for Configurator Exports**:
 
@@ -95,6 +95,53 @@ qmk compile <configuratorExport.json>
 qmk compile -kb <keyboard_name> -km <keymap_name>
 ```
 
+**Usage in Keyboard Directory**:  
+
+Must be in keyboard directory with a default keymap, or in keymap directory for keyboard, or supply one with `--keymap <keymap_name>`
+```
+qmk compile
+```
+
+**Example**:
+```
+$ qmk config compile.keymap=default
+$ cd ~/qmk_firmware/keyboards/planck/rev6
+$ qmk compile
+Ψ Compiling keymap with make planck/rev6:default
+...
+```
+or with optional keymap argument
+
+```
+$ cd ~/qmk_firmware/keyboards/clueboard/66/rev4 
+$ qmk compile -km 66_iso
+Ψ Compiling keymap with make clueboard/66/rev4:66_iso
+...
+```
+or in keymap directory
+
+```
+$ cd ~/qmk_firmware/keyboards/gh60/satan/keymaps/colemak
+$ qmk compile
+Ψ Compiling keymap with make make gh60/satan:colemak
+...
+```
+
+**Usage in Layout Directory**:  
+
+Must be under `qmk_firmware/layouts/`, and in a keymap folder.
+```
+qmk compile -kb <keyboard_name>
+```
+
+**Example**:
+```
+$ cd ~/qmk_firmware/layouts/community/60_ansi/mechmerlin-ansi
+$ qmk compile -kb dz60
+Ψ Compiling keymap with make dz60:mechmerlin-ansi
+...
+```
+
 ## `qmk flash`
 
 This command is similar to `qmk compile`, but can also target a bootloader. The bootloader is optional, and is set to `:flash` by default.
@@ -141,14 +188,28 @@ qmk docs [-p PORT]
 
 ## `qmk doctor`
 
-This command examines your environment and alerts you to potential build or flash problems.
+This command examines your environment and alerts you to potential build or flash problems. It can fix many of them if you want it to.
 
 **Usage**:
 
 ```
-qmk doctor
+qmk doctor [-y] [-n]
 ```
 
+**Examples**:
+
+Check your environment for problems and prompt to fix them:
+
+    qmk doctor
+
+Check your environment and automatically fix any problems found:
+
+    qmk doctor -y
+
+Check your environment and report problems only:
+
+    qmk doctor -n
+
 ## `qmk json-keymap`
 
 Creates a keymap.c from a QMK Configurator export.

docs/coding_conventions_python.md

@@ -309,6 +309,18 @@ FIXME(username): Revisit this code when the frob feature is done.
 
 ...where username is your GitHub username.
 
-# Unit Tests
+# Testing
 
-These are good. We should have some one day.
+We use a combination of Integration and Unit testing to ensure that the our code is as bug-free as possible. All the tests can be found in `lib/python/qmk/tests/`. You can run all the tests with `qmk pytest`.
+
+At the time of this writing our tests are not very comprehensive. Looking at the current tests and writing new test cases for untested situations is a great way to both familiarize yourself with the codebase and contribute to QMK.
+
+## Integration Tests
+
+Integration tests can be found in `lib/python/qmk/tests/test_cli_commands.py`. This is where CLI commands are actually run and their overall behavior is verified. We use [`subprocess`](https://docs.python.org/3.5/library/subprocess.html#module-subprocess) to launch each CLI command and a combination of checking output and returncode to determine if the right thing happened.
+
+## Unit Tests
+
+The other `test_*.py` files in `lib/python/qmk/tests/` contain unit tests. You can write tests for individual functions inside `lib/python/qmk/` here. Generally these files are named after the module, with dots replaced by underscores.
+
+At the time of this writing we do not do any mocking for our tests. If you would like to help us change this please [open an issue](https://github.com/qmk/qmk_firmware/issues/new?assignees=&labels=cli%2C+python&template=other_issues.md&title=) or [join #cli on Discord](https://discord.gg/heQPAgy) and start a conversation there.

docs/config_options.md

@@ -78,7 +78,7 @@ This is a C header file that is one of the first things included, and will persi
 * `#define BACKLIGHT_PIN B7`
   * pin of the backlight
 * `#define BACKLIGHT_LEVELS 3`
-  * number of levels your backlight will have (maximum 15 excluding off)
+  * number of levels your backlight will have (maximum 31 excluding off)
 * `#define BACKLIGHT_BREATHING`
   * enables backlight breathing
 * `#define BREATHING_PERIOD 6`
@@ -143,10 +143,14 @@ If you define these options you will enable the associated feature, which may in
 * `#define IGNORE_MOD_TAP_INTERRUPT`
   * makes it possible to do rolling combos (zx) with keys that convert to other keys on hold, by enforcing the `TAPPING_TERM` for both keys.
   * See [Mod tap interrupt](feature_advanced_keycodes.md#ignore-mod-tap-interrupt) for details
+* `#define IGNORE_MOD_TAP_INTERRUPT_PER_KEY`
+  * enables handling for per key `IGNORE_MOD_TAP_INTERRUPT` settings
 * `#define TAPPING_FORCE_HOLD`
   * makes it possible to use a dual role key as modifier shortly after having been tapped
   * See [Hold after tap](feature_advanced_keycodes.md#tapping-force-hold)
   * Breaks any Tap Toggle functionality (`TT` or the One Shot Tap Toggle)
+* `#define TAPPING_FORCE_HOLD_PER_KEY`
+  * enables handling for per key `TAPPING_FORCE_HOLD` settings
 * `#define LEADER_TIMEOUT 300`
   * how long before the leader key times out
     * If you're having issues finishing the sequence before it times out, you may need to increase the timeout setting. Or you may want to enable the `LEADER_PER_KEY_TIMING` option, which resets the timeout after each key is tapped.
@@ -272,9 +276,12 @@ There are a few different ways to set handedness for split keyboards (listed in
   * Default behavior for ARM
   * Required for AVR Teensy
 
-* `#define SPLIT_USB_TIMEOUT 2500`
+* `#define SPLIT_USB_TIMEOUT 2000`
   * Maximum timeout when detecting master/slave when using `SPLIT_USB_DETECT`
 
+* `#define SPLIT_USB_TIMEOUT_POLL 10`
+  * Poll frequency when detecting master/slave when using `SPLIT_USB_DETECT`
+
 # The `rules.mk` File
 
 This is a [make](https://www.gnu.org/software/make/manual/make.html) file that is included by the top-level `Makefile`. It is used to set some information about the MCU that we will be compiling for as well as enabling and disabling certain features.

docs/custom_matrix.md

@@ -0,0 +1,108 @@
+# Custom Matrix
+
+QMK provides a mechanism to supplement or replace the default matrix scanning routine with your own code.
+
+The reasons to use this feature include:
+
+* Extra hardware between the keyboard's switches and MCU pins
+  * I/O multiplexer
+  * Line decoder
+* Irregular switch matrix
+  * Simultaneous use of `COL2ROW` and `ROW2COL`
+
+## Prerequisites
+
+Implementing custom matrix usually involves compilation of an additional source file. It is recommended that for consistency, this file is called `matrix.c`.
+
+Add a new file to your keyboard directory:
+```text
+keyboards/<keyboard>/matrix.c
+```
+
+And to configure compilation for the new file, add this to your `rules.mk`:
+```make
+SRC += matrix.c
+```
+
+## 'lite'
+
+Provides a default implementation for various scanning functions, reducing the boilerplate code when implementing custom matrix.
+To configure it, add this to your `rules.mk`:
+
+```make
+CUSTOM_MATRIX = lite
+```
+
+And implement the following functions in a `matrix.c` file in your keyboard folder:
+
+```c
+void matrix_init_custom(void) {
+    // TODO: initialize hardware here
+}
+
+bool matrix_scan_custom(matrix_row_t current_matrix[]) {
+    bool matrix_has_changed = false;
+
+    // TODO: add matrix scanning routine here
+
+    return matrix_has_changed;
+}
+```
+
+
+## Full Replacement
+
+When more control over the scanning routine is required, you can choose to implement the full scanning routine.
+To configure it, add this to your rules.mk:
+
+```make
+CUSTOM_MATRIX = yes
+```
+
+And implement the following functions in a `matrix.c` file in your keyboard folder:
+
+```c
+matrix_row_t matrix_get_row(uint8_t row) {
+    // TODO: return the requested row data
+}
+
+void matrix_print(void) {
+    // TODO: use print() to dump the current matrix state to console
+}
+
+void matrix_init(void) {
+    // TODO: initialize hardware and global matrix state here
+
+    // Unless hardware debouncing - Init the configured debounce routine
+    debounce_init(MATRIX_ROWS);
+
+    // This *must* be called for correct keyboard behavior
+    matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void) {
+    bool matrix_has_changed = false;
+
+    // TODO: add matrix scanning routine here
+
+    // Unless hardware debouncing - use the configured debounce routine
+    debounce(raw_matrix, matrix, MATRIX_ROWS, changed);
+
+    // This *must* be called for correct keyboard behavior
+    matrix_scan_quantum();
+
+    return matrix_has_changed;
+}
+```
+
+And also provide defaults for the following callbacks:
+
+```c
+__attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); }
+
+__attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); }
+
+__attribute__((weak)) void matrix_init_user(void) {}
+
+__attribute__((weak)) void matrix_scan_user(void) {}
+```

docs/custom_quantum_functions.md

@@ -489,14 +489,24 @@ The `val` is the value of the data that you want to write to EEPROM.  And the `e
 
 # Custom Tapping Term
 
-By default, the tapping term is defined globally, and is not configurable by key.  For most users, this is perfectly fine.  But in come cases, dual function keys would be greatly improved by different timeouts than `LT` keys, or because some keys may be easier to hold than others.  Instead of using custom key codes for each, this allows for per key configurable `TAPPING_TERM`.
+By default, the tapping term and related options (such as `IGNORE_MOD_TAP_INTERRUPT`) are defined globally, and are not configurable by key.  For most users, this is perfectly fine.  But in some cases, dual function keys would be greatly improved by different timeout behaviors than `LT` keys, or because some keys may be easier to hold than others.  Instead of using custom key codes for each, this allows for per key configurable timeout behaviors.
 
-To enable this functionality, you need to add `#define TAPPING_TERM_PER_KEY` to your `config.h`, first. 
+There are two configurable options to control per-key timeout behaviors:
+
+- `TAPPING_TERM_PER_KEY`
+- `IGNORE_MOD_TAP_INTERRUPT_PER_KEY`
+
+You need to add `#define` lines to your `config.h` for each feature you want.
+
+```
+#define TAPPING_TERM_PER_KEY
+#define IGNORE_MOD_TAP_INTERRUPT_PER_KEY
+```
 
 
 ## Example `get_tapping_term` Implementation
 
-To change the `TAPPING TERM` based on the keycode, you'd want to add something like the following to your `keymap.c` file: 
+To change the `TAPPING_TERM` based on the keycode, you'd want to add something like the following to your `keymap.c` file:
 
 ```c
 uint16_t get_tapping_term(uint16_t keycode) {
@@ -511,6 +521,21 @@ uint16_t get_tapping_term(uint16_t keycode) {
 }
 ```
 
-### `get_tapping_term` Function Documentation
+## Example `get_ignore_mod_tap_interrupt` Implementation
 
-Unlike many of the other functions here, there isn't a need (or even reason) to have a quantum or keyboard level function. Only a user level function is useful here, so no need to mark it as such.
+To change the `IGNORE_MOD_TAP_INTERRUPT` value based on the keycode, you'd want to add something like the following to your `keymap.c` file:
+
+```c
+bool get_ignore_mod_tap_interrupt(uint16_t keycode) {
+  switch (keycode) {
+    case SFT_T(KC_SPC):
+      return true;
+    default:
+      return false;
+  }
+}
+```
+
+## `get_tapping_term` / `get_ignore_mod_tap_interrupt` Function Documentation
+
+Unlike many of the other functions here, there isn't a need (or even reason) to have a quantum or keyboard level function. Only user level functions are useful here, so no need to mark them as such.

docs/eeprom_driver.md

@@ -0,0 +1,50 @@
+# EEPROM Driver Configuration
+
+The EEPROM driver can be swapped out depending on the needs of the keyboard, or whether extra hardware is present.
+
+Driver                      | Description
+--------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
+`EEPROM_DRIVER = vendor`    | Uses the on-chip driver provided by the chip manufacturer. For AVR, this is provided by avr-libc. This is supported on ARM for a subset of chips -- STM32F3xx, STM32F1xx, and STM32F072xB will be emulated by writing to flash. Other chips will generally act as "transient" below.
+`EEPROM_DRIVER = i2c`       | Supports writing to I2C-based 24xx EEPROM chips. See the driver section below.
+`EEPROM_DRIVER = transient` | Fake EEPROM driver -- supports reading/writing to RAM, and will be discarded when power is lost.
+
+## Vendor Driver Configuration
+
+No configurable options are available.
+
+## I2C Driver Configuration
+
+Currently QMK supports 24xx-series chips over I2C. As such, requires a working i2c_master driver configuration. You can override the driver configuration via your config.h:
+
+`config.h` override                         | Description                                                                         | Default Value
+------------------------------------------- | ----------------------------------------------------------------------------------- | ------------------------------------
+`#define EXTERNAL_EEPROM_I2C_BASE_ADDRESS`  | Base I2C address for the EEPROM -- shifted left by 1 as per i2c_master requirements | 0b10100000
+`#define EXTERNAL_EEPROM_I2C_ADDRESS(addr)` | Calculated I2C address for the EEPROM                                               | `(EXTERNAL_EEPROM_I2C_BASE_ADDRESS)`
+`#define EXTERNAL_EEPROM_BYTE_COUNT`        | Total size of the EEPROM in bytes                                                   | 8192
+`#define EXTERNAL_EEPROM_PAGE_SIZE`         | Page size of the EEPROM in bytes, as specified in the datasheet                     | 32
+`#define EXTERNAL_EEPROM_ADDRESS_SIZE`      | The number of bytes to transmit for the memory location within the EEPROM           | 2
+`#define EXTERNAL_EEPROM_WRITE_TIME`        | Write cycle time of the EEPROM, as specified in the datasheet                       | 5
+
+Default values and extended descriptions can be found in `drivers/eeprom/eeprom_i2c.h`.
+
+Alternatively, there are pre-defined hardware configurations for available chips/modules:
+
+Module           | Equivalent `#define`            | Source
+-----------------|---------------------------------|------------------------------------------
+CAT24C512 EEPROM | `#define EEPROM_I2C_CAT24C512`  | <https://www.sparkfun.com/products/14764>
+RM24C512C EEPROM | `#define EEPROM_I2C_RM24C512C`  | <https://www.sparkfun.com/products/14764>
+24LC128 EEPROM   | `#define EEPROM_I2C_24LC128`    | <https://www.microchip.com/wwwproducts/en/24LC128>
+24LC256 EEPROM   | `#define EEPROM_I2C_24LC256`    | <https://www.sparkfun.com/products/525>
+MB85RC256V FRAM  | `#define EEPROM_I2C_MB85RC256V` | <https://www.adafruit.com/product/1895>
+
+?> If you find that the EEPROM is not cooperating, ensure you've correctly shifted up your EEPROM address by 1. For example, the datasheet might state the address as `0b01010000` -- the correct value of `EXTERNAL_EEPROM_I2C_BASE_ADDRESS` needs to be `0b10100000`.
+
+## Transient Driver configuration
+
+The only configurable item for the transient EEPROM driver is its size:
+
+`config.h` override             | Description                               | Default Value
+------------------------------- | ----------------------------------------- | -------------
+`#define TRANSIENT_EEPROM_SIZE` | Total size of the EEPROM storage in bytes | 64
+
+Default values and extended descriptions can be found in `drivers/eeprom/eeprom_transient.h`.

docs/feature_advanced_keycodes.md

@@ -291,6 +291,25 @@ Normally, this would send `X` (`SHIFT`+`x`). With `Ignore Mod Tap Interrupt` ena
 
 ?> If you have `Permissive Hold` enabled, as well, this will modify how both work. The regular key has the modifier added if the first key is released first or if both keys are held longer than the `TAPPING_TERM`.
 
+For more granular control of this feature, you can add the following to your `config.h`:
+
+```c
+#define IGNORE_MOD_TAP_INTERRUPT_PER_KEY
+```
+
+You can then add the following function to your keymap:
+
+```c
+bool get_ignore_mod_tap_interrupt(uint16_t keycode) {
+  switch (keycode) {
+    case SFT_T(KC_SPC):
+      return true;
+    default:
+      return false;
+  }
+}
+```
+
 ## Tapping Force Hold
 
 To enable `tapping force hold`, add the following to your `config.h`: 
@@ -315,6 +334,25 @@ With `TAPPING_FORCE_HOLD`, the second press will be interpreted as a Shift, allo
 
 !> `TAPPING_FORCE_HOLD` will break anything that uses tapping toggles (Such as the `TT` layer keycode, and the One Shot Tapping Toggle).
 
+For more granular control of this feature, you can add the following to your `config.h`:
+
+```c
+#define TAPPING_FORCE_HOLD_PER_KEY
+```
+
+You can then add the following function to your keymap:
+
+```c
+bool get_tapping_force_hold(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case LT(1, KC_BSPC):
+      return true;
+    default:
+      return false;
+  }
+}
+```
+
 ## Retro Tapping
 
 To enable `retro tapping`, add the following to your `config.h`: 

docs/feature_oled_driver.md

@@ -1,139 +1,142 @@
 # OLED Driver
 
-## OLED Supported Hardware
+## Supported Hardware
 
 OLED modules using SSD1306 or SH1106 driver ICs, communicating over I2C.
 Tested combinations:
 
-| IC driver |   Size | Keyboard Platform | Notes                    |
-|-----------|--------|-------------------|--------------------------|
-| SSD1306   | 128x32 | AVR               | Primary support          |
-| SSD1306   | 128x64 | AVR               | Verified working         |
-| SSD1306   | 128x32 | ARM               |                          |
-| SH1106    | 128x64 | AVR               | No rotation or scrolling |
+|IC       |Size  |Platform|Notes                   |
+|---------|------|--------|------------------------|
+|SSD1306  |128x32|AVR     |Primary support         |
+|SSD1306  |128x64|AVR     |Verified working        |
+|SSD1306  |128x32|Arm     |                        |
+|SH1106   |128x64|AVR     |No rotation or scrolling|
 
-Hardware configurations using ARM-based microcontrollers or different sizes of OLED modules may be compatible, but are untested.
+Hardware configurations using Arm-based microcontrollers or different sizes of OLED modules may be compatible, but are untested.
 
-!> Warning: This OLED Driver currently uses the new i2c_master driver from split common code. If your split keyboard uses I2C to communicate between sides, this driver could cause an address conflict (serial is fine). Please contact your keyboard vendor and ask them to migrate to the latest split common code to fix this. In addition, the display timeout system to reduce OLED burn-in also uses split common to detect keypresses, so you will need to implement custom timeout logic for non-split common keyboards.
+!> Warning: This OLED driver currently uses the new i2c_master driver from Split Common code. If your split keyboard uses I2C to communicate between sides, this driver could cause an address conflict (serial is fine). Please contact your keyboard vendor and ask them to migrate to the latest Split Common code to fix this. In addition, the display timeout system to reduce OLED burn-in also uses Split Common to detect keypresses, so you will need to implement custom timeout logic for non-Split Common keyboards.
 
 ## Usage
 
-To enable the OLED feature, there are three steps. First, when compiling your keyboard, you'll need to set `OLED_DRIVER_ENABLE=yes` in `rules.mk`, e.g.:
+To enable the OLED feature, there are three steps. First, when compiling your keyboard, you'll need to add the following to your `rules.mk`:
 
-```
+```make
 OLED_DRIVER_ENABLE = yes
 ```
 
-This enables the feature and the `OLED_DRIVER_ENABLE` define. Then in your `keymap.c` file, you will need to implement the user task call, e.g:
+Then in your `keymap.c` file, implement the OLED task call. This example assumes your keymap has three layers named `_QWERTY`, `_FN` and `_ADJ`:
 
-```C++
+```c
 #ifdef OLED_DRIVER_ENABLE
 void oled_task_user(void) {
-  // Host Keyboard Layer Status
-  oled_write_P(PSTR("Layer: "), false);
-  switch (get_highest_layer(layer_state)) {
-    case _QWERTY:
-      oled_write_P(PSTR("Default\n"), false);
-      break;
-    case _FN:
-      oled_write_P(PSTR("FN\n"), false);
-      break;
-    case _ADJ:
-      oled_write_P(PSTR("ADJ\n"), false);
-      break;
-    default:
-      // Or use the write_ln shortcut over adding '\n' to the end of your string
-      oled_write_ln_P(PSTR("Undefined"), false);
-  }
+    // Host Keyboard Layer Status
+    oled_write_P(PSTR("Layer: "), false);
 
-  // Host Keyboard LED Status
-  uint8_t led_usb_state = host_keyboard_leds();
-  oled_write_P(led_usb_state & (1<<USB_LED_NUM_LOCK) ? PSTR("NUMLCK ") : PSTR("       "), false);
-  oled_write_P(led_usb_state & (1<<USB_LED_CAPS_LOCK) ? PSTR("CAPLCK ") : PSTR("       "), false);
-  oled_write_P(led_usb_state & (1<<USB_LED_SCROLL_LOCK) ? PSTR("SCRLCK ") : PSTR("       "), false);
+    switch (get_highest_layer(layer_state)) {
+        case _QWERTY:
+            oled_write_P(PSTR("Default\n"), false);
+            break;
+        case _FN:
+            oled_write_P(PSTR("FN\n"), false);
+            break;
+        case _ADJ:
+            oled_write_P(PSTR("ADJ\n"), false);
+            break;
+        default:
+            // Or use the write_ln shortcut over adding '\n' to the end of your string
+            oled_write_ln_P(PSTR("Undefined"), false);
+    }
+
+    // Host Keyboard LED Status
+    led_t led_state = host_keyboard_led_state();
+    oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR("    "), false);
+    oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR("    "), false);
+    oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR("    "), false);
 }
 #endif
 ```
 
 ## Logo Example
 
-In the default font, ranges in the font file are reserved for a QMK Logo. To Render this logo to the oled screen, use the following code example:
+In the default font, certain ranges of characters are reserved for a QMK logo. To render this logo to the OLED screen, use the following code example:
 
-```C++
+```c
 static void render_logo(void) {
-  static const char PROGMEM qmk_logo[] = {
-    0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
-    0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
-    0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0};
+    static const char PROGMEM qmk_logo[] = {
+        0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94,
+        0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4,
+        0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0x00
+    };
 
-  oled_write_P(qmk_logo, false);
+    oled_write_P(qmk_logo, false);
 }
 ```
 
 ## Other Examples
 
-In split keyboards, it is very common to have two OLED displays that each render different content and oriented flipped differently. You can do this by switching which content to render by using the return from `is_keyboard_master()` or `is_keyboard_left()` found in `split_util.h`, e.g:
+In split keyboards, it is very common to have two OLED displays that each render different content and are oriented or flipped differently. You can do this by switching which content to render by using the return value from `is_keyboard_master()` or `is_keyboard_left()` found in `split_util.h`, e.g:
 
-```C++
+```c
 #ifdef OLED_DRIVER_ENABLE
 oled_rotation_t oled_init_user(oled_rotation_t rotation) {
-  if (!is_keyboard_master())
-    return OLED_ROTATION_180;  // flips the display 180 degrees if offhand
-  return rotation;
+    if (!is_keyboard_master()) {
+        return OLED_ROTATION_180;  // flips the display 180 degrees if offhand
+    }
+
+    return rotation;
 }
 
 void oled_task_user(void) {
-  if (is_keyboard_master()) {
-    render_status();     // Renders the current keyboard state (layer, lock, caps, scroll, etc)
-  } else {
-    render_logo();       // Renders a statuc logo
-    oled_scroll_left();  // Turns on scrolling
-  }
+    if (is_keyboard_master()) {
+        render_status();  // Renders the current keyboard state (layer, lock, caps, scroll, etc)
+    } else {
+        render_logo();  // Renders a static logo
+        oled_scroll_left();  // Turns on scrolling
+    }
 }
 #endif
 ```
 
+## Basic Configuration
 
- ## Basic Configuration
-
-| Define                     | Default           | Description                                                                                                                |
-|----------------------------|-------------------|----------------------------------------------------------------------------------------------------------------------------|
-| `OLED_DISPLAY_ADDRESS`     | `0x3C`            | The i2c address of the OLED Display                                                                                        |
-| `OLED_FONT_H`              | `"glcdfont.c"`    | The font code file to use for custom fonts                                                                                 |
-| `OLED_FONT_START`          | `0`               | The starting characer index for custom fonts                                                                               |
-| `OLED_FONT_END`            | `224`             | The ending characer index for custom fonts                                                                                 |
-| `OLED_FONT_WIDTH`          | `6`               | The font width                                                                                                             |
-| `OLED_FONT_HEIGHT`         | `8`               | The font height (untested)                                                                                                 |
-| `OLED_TIMEOUT`             | `60000`           | Turns off the OLED screen after 60000ms of keyboard inactivity. Helps reduce OLED Burn-in. Set to 0 to disable.            |
-| `OLED_SCROLL_TIMEOUT`      | `0`               | Scrolls the OLED screen after 0ms of OLED inactivity. Helps reduce OLED Burn-in. Set to 0 to disable.                      |
-| `OLED_SCROLL_TIMEOUT_RIGHT`| *Not defined*     | Scroll timeout direction is right when defined, left when undefined.                                                       |
-| `OLED_IC`                  | `OLED_IC_SSD1306` | Set to `OLED_IC_SH1106` if you're using the SH1106 OLED controller.                                                        |
-| `OLED_COLUMN_OFFSET`       | `0`               | (SH1106 only.) Shift output to the right this many pixels.<br />Useful for 128x64 displays centered on a 132x64 SH1106 IC. |
+|Define                     |Default          |Description                                                                                                               |
+|---------------------------|-----------------|--------------------------------------------------------------------------------------------------------------------------|
+|`OLED_DISPLAY_ADDRESS`     |`0x3C`           |The i2c address of the OLED Display                                                                                       |
+|`OLED_FONT_H`              |`"glcdfont.c"`   |The font code file to use for custom fonts                                                                                |
+|`OLED_FONT_START`          |`0`              |The starting characer index for custom fonts                                                                              |
+|`OLED_FONT_END`            |`223`            |The ending characer index for custom fonts                                                                                |
+|`OLED_FONT_WIDTH`          |`6`              |The font width                                                                                                            |
+|`OLED_FONT_HEIGHT`         |`8`              |The font height (untested)                                                                                                |
+|`OLED_TIMEOUT`             |`60000`          |Turns off the OLED screen after 60000ms of keyboard inactivity. Helps reduce OLED Burn-in. Set to 0 to disable.           |
+|`OLED_SCROLL_TIMEOUT`      |`0`              |Scrolls the OLED screen after 0ms of OLED inactivity. Helps reduce OLED Burn-in. Set to 0 to disable.                     |
+|`OLED_SCROLL_TIMEOUT_RIGHT`|*Not defined*    |Scroll timeout direction is right when defined, left when undefined.                                                      |
+|`OLED_IC`                  |`OLED_IC_SSD1306`|Set to `OLED_IC_SH1106` if you're using the SH1106 OLED controller.                                                       |
+|`OLED_COLUMN_OFFSET`       |`0`              |(SH1106 only.) Shift output to the right this many pixels.<br />Useful for 128x64 displays centered on a 132x64 SH1106 IC.|
 
  ## 128x64 & Custom sized OLED Displays
 
  The default display size for this feature is 128x32 and all necessary defines are precalculated with that in mind. We have added a define, `OLED_DISPLAY_128X64`, to switch all the values to be used in a 128x64 display, as well as added a custom define, `OLED_DISPLAY_CUSTOM`, that allows you to provide the necessary values to the driver.
 
-|Define                 |Default        |Description                                                      |
-|-----------------------|---------------|-----------------------------------------------------------------|
-|`OLED_DISPLAY_128X64`  |*Not defined*  |Changes the display defines for use with 128x64 displays.        |
-|`OLED_DISPLAY_CUSTOM`  |*Not defined*  |Changes the display defines for use with custom displays.<br />Requires user to implement the below defines. |
-|`OLED_DISPLAY_WIDTH`   |`128`          |The width of the OLED display.                                   |
-|`OLED_DISPLAY_HEIGHT`  |`32`           |The height of the OLED display.                                  |
-|`OLED_MATRIX_SIZE`     |`512`          |The local buffer size to allocate.<br />`(OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH)`. |
-|`OLED_BLOCK_TYPE`      |`uint16_t`     |The unsigned integer type to use for dirty rendering. |
-|`OLED_BLOCK_COUNT`     |`16`           |The number of blocks the display is divided into for dirty rendering.<br />`(sizeof(OLED_BLOCK_TYPE) * 8)`. |
-|`OLED_BLOCK_SIZE`      |`32`           |The size of each block for dirty rendering<br />`(OLED_MATRIX_SIZE / OLED_BLOCK_COUNT)`. |
-|`OLED_COM_PINS`        |`COM_PINS_SEQ` |How the SSD1306 chip maps it's memory to display.<br />Options are `COM_PINS_SEQ`, `COM_PINS_ALT`, `COM_PINS_SEQ_LR`, & `COM_PINS_ALT_LR`. |
-|`OLED_SOURCE_MAP`      |`{ 0, ... N }` |Precalculated source array to use for mapping source buffer to target OLED memory in 90 degree rendering.         |
-|`OLED_TARGET_MAP`      |`{ 24, ... N }`|Precalculated target array to use for mapping source buffer to target OLED memory in 90 degree rendering.         |
+|Define               |Default        |Description                                                                                                                             |
+|---------------------|---------------|----------------------------------------------------------------------------------------------------------------------------------------|
+|`OLED_DISPLAY_128X64`|*Not defined*  |Changes the display defines for use with 128x64 displays.                                                                               |
+|`OLED_DISPLAY_CUSTOM`|*Not defined*  |Changes the display defines for use with custom displays.<br>Requires user to implement the below defines.                              |
+|`OLED_DISPLAY_WIDTH` |`128`          |The width of the OLED display.                                                                                                          |
+|`OLED_DISPLAY_HEIGHT`|`32`           |The height of the OLED display.                                                                                                         |
+|`OLED_MATRIX_SIZE`   |`512`          |The local buffer size to allocate.<br>`(OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH)`.                                                 |
+|`OLED_BLOCK_TYPE`    |`uint16_t`     |The unsigned integer type to use for dirty rendering.                                                                                   |
+|`OLED_BLOCK_COUNT`   |`16`           |The number of blocks the display is divided into for dirty rendering.<br>`(sizeof(OLED_BLOCK_TYPE) * 8)`.                               |
+|`OLED_BLOCK_SIZE`    |`32`           |The size of each block for dirty rendering<br>`(OLED_MATRIX_SIZE / OLED_BLOCK_COUNT)`.                                                  |
+|`OLED_COM_PINS`      |`COM_PINS_SEQ` |How the SSD1306 chip maps it's memory to display.<br>Options are `COM_PINS_SEQ`, `COM_PINS_ALT`, `COM_PINS_SEQ_LR`, & `COM_PINS_ALT_LR`.|
+|`OLED_SOURCE_MAP`    |`{ 0, ... N }` |Precalculated source array to use for mapping source buffer to target OLED memory in 90 degree rendering.                               |
+|`OLED_TARGET_MAP`    |`{ 24, ... N }`|Precalculated target array to use for mapping source buffer to target OLED memory in 90 degree rendering.                               |
 
 
-### 90 Degree Rotation - Technical Mumbo Jumbo 
+### 90 Degree Rotation - Technical Mumbo Jumbo
 
 !> Rotation is unsupported on the SH1106.
 
-```C
+```c
 // OLED Rotation enum values are flags
 typedef enum {
     OLED_ROTATION_0   = 0,
@@ -143,9 +146,9 @@ typedef enum {
 } oled_rotation_t;
 ```
 
- OLED displays driven by SSD1306 drivers only natively support in hard ware 0 degree and 180 degree rendering. This feature is done in software and not free. Using this feature will increase the time to calculate what data to send over i2c to the OLED. If you are strapped for cycles, this can cause keycodes to not register. In testing however, the rendering time on an `atmega32u4` board only went from 2ms to 5ms and keycodes not registering was only noticed once we hit 15ms. 
- 
- 90 Degree Rotated Rendering is achieved by using bitwise operations to rotate each 8 block of memory and uses two precalculated arrays to remap buffer memory to OLED memory. The memory map defines are precalculated for remap performance and are calculated based on the OLED Height, Width, and Block Size. For example, in the 128x32 implementation with a `uint8_t` block type, we have a 64 byte block size. This gives us eight 8 byte blocks that need to be rotated and rendered. The OLED renders horizontally two 8 byte blocks before moving down a page, e.g:
+OLED displays driven by SSD1306 drivers only natively support in hardware 0 degree and 180 degree rendering. This feature is done in software and not free. Using this feature will increase the time to calculate what data to send over i2c to the OLED. If you are strapped for cycles, this can cause keycodes to not register. In testing however, the rendering time on an ATmega32U4 board only went from 2ms to 5ms and keycodes not registering was only noticed once we hit 15ms.
+
+90 degree rotation is achieved by using bitwise operations to rotate each 8 block of memory and uses two precalculated arrays to remap buffer memory to OLED memory. The memory map defines are precalculated for remap performance and are calculated based on the display height, width, and block size. For example, in the 128x32 implementation with a `uint8_t` block type, we have a 64 byte block size. This gives us eight 8 byte blocks that need to be rotated and rendered. The OLED renders horizontally two 8 byte blocks before moving down a page, e.g:
 
 |   |   |   |   |   |   |
 |---|---|---|---|---|---|
@@ -167,8 +170,8 @@ So those precalculated arrays just index the memory offsets in the order in whic
 
 ## OLED API
 
-```C++
-// OLED Rotation enum values are flags
+```c
+// OLED rotation enum values are flags
 typedef enum {
     OLED_ROTATION_0   = 0,
     OLED_ROTATION_90  = 1,
@@ -272,26 +275,26 @@ uint8_t oled_max_lines(void);
 
 !> Scrolling and rotation are unsupported on the SH1106.
 
-## SSD1306.h driver conversion guide
+## SSD1306.h Driver Conversion Guide
 
-|Old API                    |Recommended New API                |
-|---------------------------|-----------------------------------|
-|`struct CharacterMatrix`   |*removed - delete all references*  |
-|`iota_gfx_init`            |`oled_init`                        |
-|`iota_gfx_on`              |`oled_on`                          |
-|`iota_gfx_off`             |`oled_off`                         |
-|`iota_gfx_flush`           |`oled_render`                      |
-|`iota_gfx_write_char`      |`oled_write_char`                  |
-|`iota_gfx_write`           |`oled_write`                       |
-|`iota_gfx_write_P`         |`oled_write_P`                     |
-|`iota_gfx_clear_screen`    |`oled_clear`                       |
-|`matrix_clear`             |*removed - delete all references*  |
-|`matrix_write_char_inner`  |`oled_write_char`                  |
-|`matrix_write_char`        |`oled_write_char`                  |
-|`matrix_write`             |`oled_write`                       |
-|`matrix_write_ln`          |`oled_write_ln`                    |
-|`matrix_write_P`           |`oled_write_P`                     |
-|`matrix_write_ln_P`        |`oled_write_ln_P`                  |
-|`matrix_render`            |`oled_render`                      |
-|`iota_gfx_task`            |`oled_task`                        |
-|`iota_gfx_task_user`       |`oled_task_user`                   |
+|Old API                  |Recommended New API              |
+|-------------------------|---------------------------------|
+|`struct CharacterMatrix` |*removed - delete all references*|
+|`iota_gfx_init`          |`oled_init`                      |
+|`iota_gfx_on`            |`oled_on`                        |
+|`iota_gfx_off`           |`oled_off`                       |
+|`iota_gfx_flush`         |`oled_render`                    |
+|`iota_gfx_write_char`    |`oled_write_char`                |
+|`iota_gfx_write`         |`oled_write`                     |
+|`iota_gfx_write_P`       |`oled_write_P`                   |
+|`iota_gfx_clear_screen`  |`oled_clear`                     |
+|`matrix_clear`           |*removed - delete all references*|
+|`matrix_write_char_inner`|`oled_write_char`                |
+|`matrix_write_char`      |`oled_write_char`                |
+|`matrix_write`           |`oled_write`                     |
+|`matrix_write_ln`        |`oled_write_ln`                  |
+|`matrix_write_P`         |`oled_write_P`                   |
+|`matrix_write_ln_P`      |`oled_write_ln_P`                |
+|`matrix_render`          |`oled_render`                    |
+|`iota_gfx_task`          |`oled_task`                      |
+|`iota_gfx_task_user`     |`oled_task_user`                 |

docs/feature_rgb_matrix.md

@@ -199,6 +199,7 @@ enum rgb_matrix_effects {
     RGB_MATRIX_SOLID_COLOR = 1,     // Static single hue, no speed support
     RGB_MATRIX_ALPHAS_MODS,         // Static dual hue, speed is hue for secondary hue
     RGB_MATRIX_GRADIENT_UP_DOWN,    // Static gradient top to bottom, speed controls how much gradient changes
+    RGB_MATRIX_GRADIENT_LEFT_RIGHT,    // Static gradient left to right, speed controls how much gradient changes
     RGB_MATRIX_BREATHING,           // Single hue brightness cycling animation
     RGB_MATRIX_BAND_SAT,        // Single hue band fading saturation scrolling left to right
     RGB_MATRIX_BAND_VAL,        // Single hue band fading brightness scrolling left to right
@@ -379,6 +380,10 @@ These are defined in [`rgblight_list.h`](https://github.com/qmk/qmk_firmware/blo
 #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT // Sets the default mode, if none has been set
+#define RGB_MATRIX_STARTUP_HUE 0 // Sets the default hue value, if none has been set
+#define RGB_MATRIX_STARTUP_SAT 255 // Sets the default saturation value, if none has been set
+#define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS // Sets the default brightness value, if none has been set
+#define RGB_MATRIX_STARTUP_SPD 127 // Sets the default animation speed, if none has been set
 ```
 
 ## EEPROM storage

docs/feature_split_keyboard.md

@@ -198,10 +198,15 @@ This option changes the startup behavior to detect an active USB connection when
 ?> This setting will stop the ability to demo using battery packs.
 
 ```c
-#define SPLIT_USB_TIMEOUT 2500
+#define SPLIT_USB_TIMEOUT 2000
 ```
 This sets the maximum timeout when detecting master/slave when using `SPLIT_USB_DETECT`.
 
+```c
+#define SPLIT_USB_TIMEOUT_POLL 10
+```
+This sets the poll frequency when detecting master/slave when using `SPLIT_USB_DETECT`
+
 ## Additional Resources
 
 Nicinabox has a [very nice and detailed guide](https://github.com/nicinabox/lets-split-guide) for the Let's Split keyboard, that covers most everything you need to know, including troubleshooting information. 

docs/getting_started_build_tools.md

@@ -120,12 +120,12 @@ If this is a bit complex for you, Docker might be the turnkey solution you need.
 util/docker_build.sh keyboard:keymap
 # For example: util/docker_build.sh ergodox_ez:steno
 ```
-This will compile the desired keyboard/keymap and leave the resulting `.hex` or `.bin` file in the QMK directory for you to flash. If `:keymap` is omitted, the `default` keymap is used. Note that the parameter format is the same as when building with `make`.
+This will compile the desired keyboard/keymap and leave the resulting `.hex` or `.bin` file in the QMK directory for you to flash. If `:keymap` is omitted, all keymaps are used. Note that the parameter format is the same as when building with `make`.
 
 You can also start the script without any parameters, in which case it will ask you to input the build parameters one by one, which you may find easier to use:
 ```bash
 util/docker_build.sh
-# Reads parameters as input (leave blank for defaults)
+# Reads parameters as input (leave blank for all keyboards/keymaps)
 ```
 
 There is also support for building _and_ flashing the keyboard straight from Docker by specifying the `target` as well:

docs/getting_started_make_guide.md

@@ -135,7 +135,7 @@ As there is no standard split communication driver for ARM-based split keyboards
 
 `CUSTOM_MATRIX`
 
-Lets you replace the default matrix scanning routine with your own code. You will need to provide your own implementations of matrix_init() and matrix_scan().
+Lets you replace the default matrix scanning routine with your own code. For further details, see the [Custom Matrix page](custom_matrix.md).
 
 `DEBOUNCE_TYPE`
 

docs/hardware_drivers.md

@@ -33,3 +33,7 @@ Support for up to 2 drivers. Each driver impliments 2 charlieplex matrices to in
 ## IS31FL3733
 
 Support for up to a single driver with room for expansion. Each driver can control 192 individual LEDs or 64 RGB LEDs. For more information on how to setup the driver see the [RGB Matrix](feature_rgb_matrix.md) page.
+
+## 24xx series external I2C EEPROM
+
+Support for an external I2C-based EEPROM instead of using the on-chip EEPROM. For more information on how to setup the driver see the [EEPROM Driver](eeprom_driver.md) page.

docs/he-il/quantum_keycodes.md

@@ -17,18 +17,8 @@
 |`DEBUG`        |           |Toggle debug mode                                                    |
 |`EEPROM_RESET` |`EEP_RST`  |Resets EEPROM state by reinitializing it                             |
 |`KC_GESC`      |`GRAVE_ESC`|Escape when tapped, <code>&#96;</code> when pressed with Shift or GUI|
-|`KC_LSPO`      |           |Left Shift when held, `(` when tapped                                |
-|`KC_RSPC`      |           |Right Shift when held, `)` when tapped                               |
-|`KC_LCPO`      |           |Left Control when held, `(` when tapped                              |
-|`KC_RCPC`      |           |Right Control when held, `)` when tapped                             |
-|`KC_LAPO`      |           |Left Alt when held, `(` when tapped                                  |
-|`KC_RAPC`      |           |Right Alt when held, `)` when tapped                                 |
-|`KC_SFTENT`    |           |Right Shift when held, Enter when tapped                             |
 |`KC_LEAD`      |           |The [Leader key](feature_leader_key.md)                              |
 |`KC_LOCK`      |           |The [Lock key](feature_key_lock.md)                                  |
-|`FUNC(n)`      |`F(n)`     |Call `fn_action(n)` (deprecated)                                     |
-|`M(n)`         |           |Call macro `n`                                                       |
-|`MACROTAP(n)`  |           |Macro-tap `n` idk FIXME                                              |
 ```
 
 </div>

docs/ja/README.md

@@ -2,7 +2,7 @@
 
 <!---
   original document: eae21eed7:docs/README.md
-  git diff eae21eed7 HEAD docs/README.md | cat
+  git diff eae21eed7 HEAD -- docs/README.md | cat
 -->
 
 [![現在のバージョン](https://img.shields.io/github/tag/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/tags)

docs/ja/_summary.md

@@ -10,32 +10,34 @@
    * [学習リソース](ja/newbs_learn_more_resources.md)
 
 * [QMKの基本](ja/README.md)
-   * [QMKの導入](ja/getting_started_introduction.md)
+   * [QMK の導入](ja/getting_started_introduction.md)
    * [QMK CLI](ja/cli.md)
    * [QMK CLI 設定](ja/cli_configuration.md)
-   * [QMKへの貢献](ja/contributing.md)
-   * [Githubの使い方](ja/getting_started_github.md)
+   * [QMK への貢献](ja/contributing.md)
+   * [Github の使い方](ja/getting_started_github.md)
    * [ヘルプ](ja/getting_started_getting_help.md)
 
 * [破壊的な変更](ja/breaking_changes.md)
+   * [プルリクエストにフラグが付けられた](ja/breaking_changes_instructions.md)
    * [2019年8月30日](ja/ChangeLog/20190830.md)
 
 * [FAQ](ja/faq.md)
-   * [一般的なFAQ](ja/faq_general.md)
-   * [QMKのビルド/コンパイル](ja/faq_build.md)
-   * [QMKのデバッグ/トラブルシューティング](ja/faq_debug.md)
+   * [一般的な FAQ](ja/faq_general.md)
+   * [QMK のビルド/コンパイル](ja/faq_build.md)
+   * [QMK のデバッグ/トラブルシューティング](ja/faq_debug.md)
    * [キーマップ](ja/faq_keymap.md)
-   * [Zadigを使ったドライバのインストール](ja/driver_installation_zadig.md)
+   * [Zadig を使ったドライバのインストール](ja/driver_installation_zadig.md)
 
 * 詳細なガイド
    * [ビルドツールのインストール](ja/getting_started_build_tools.md)
-   * [Vagrantのガイド](ja/getting_started_vagrant.md)
+   * [Vagrant のガイド](ja/getting_started_vagrant.md)
    * [ビルド/コンパイルの説明](ja/getting_started_make_guide.md)
    * [ファームウェアのフラッシュ](ja/flashing.md)
    * [機能のカスタマイズ](ja/custom_quantum_functions.md)
    * [キーマップの概要](ja/keymap.md)
 
 * [ハードウェア](ja/hardware.md)
+   * [互換性のあるマイクロコントローラ](ja/compatible_microcontrollers.md)
    * [AVR プロセッサ](ja/hardware_avr.md)
    * [ドライバ](ja/hardware_drivers.md)
 
@@ -66,7 +68,7 @@
    * [ブートマジック](ja/feature_bootmagic.md)
    * [コンボ](ja/feature_combo.md)
    * [コマンド](ja/feature_command.md)
-   * [Debounce API](ja/feature_debounce_type.md)
+   * [デバウンス API](ja/feature_debounce_type.md)
    * [DIP スイッチ](ja/feature_dip_switch.md)
    * [動的マクロ](ja/feature_dynamic_macros.md)
    * [エンコーダ](ja/feature_encoders.md)
@@ -90,27 +92,31 @@
    * [Stenography](ja/feature_stenography.md)
    * [Swap Hands](ja/feature_swap_hands.md)
    * [タップ ダンス](ja/feature_tap_dance.md)
-   * [Terminal](ja/feature_terminal.md)
+   * [ターミナル](ja/feature_terminal.md)
    * [感熱式プリンタ](ja/feature_thermal_printer.md)
    * [ユニコード](ja/feature_unicode.md)
-   * [Userspace](ja/feature_userspace.md)
+   * [ユーザスペース](ja/feature_userspace.md)
    * [Velocikey](ja/feature_velocikey.md)
 
 * メーカーおよびモッダーのために
-   * [Hand Wiring Guide](ja/hand_wire.md)
-   * [ISP Flashing Guide](ja/isp_flashing_guide.md)
+   * [Hand Wiring ガイド](ja/hand_wire.md)
+   * [ISP 書き込みガイド](ja/isp_flashing_guide.md)
    * [ARM デバッグ ガイド](ja/arm_debugging.md)
+   * [ADC ドライバ](ja/adc_driver.md)
    * [I2C ドライバ](ja/i2c_driver.md)
+   * [WS2812 ドライバ](ja/ws2812_driver.md)
+   * [EEPROM ドライバ](ja/eeprom_driver.md)
    * [GPIO コントロール](ja/internals_gpio_control.md)
+   * [カスタムマトリックス](ja/custom_matrix.md)
    * [Proton C 規約](ja/proton_c_conversion.md)
 
 * より深く知るために
    * [キーボードがどのように動作するか](ja/how_keyboards_work.md)
-   * [QMKの理解](ja/understanding_qmk.md)
+   * [QMK の理解](ja/understanding_qmk.md)
 
 * 他の話題
-   * [EclipseでQMKを使用](ja/other_eclipse.md)
-   * [VSCodeでQMKを使用](ja/other_vscode.md)
+   * [Eclipse で QMK を使用](ja/other_eclipse.md)
+   * [VSCode で QMK を使用](ja/other_vscode.md)
    * [サポート](ja/support.md)
    * [翻訳を追加する方法](ja/translating.md)
 

docs/ja/arm_debugging.md

@@ -2,7 +2,7 @@
 
 <!---
   original document: eae21eed7:docs/arm_debugging.md
-  git diff eae21eed7 HEAD docs/arm_debugging.md | cat
+  git diff eae21eed7 HEAD -- docs/arm_debugging.md | cat
 -->
 
 このページでは、SWD アダプタとオープンソース/フリーツールを使って ARM MCU をデバッグするためのセットアップ方法について説明します。このガイドでは、GNU MCU Eclipse IDE for C/C++ Developers および OpenOCD を必要な依存関係と一緒にインストールします。
@@ -64,13 +64,13 @@ Eclipse に QMK をビルドしようとするデバイスを教える必要が
 
 ## ビルド
 
-全て正しくセットアップできていれば、ハンマーボタンを押すとファームウェアがビルドされ、.binファイルが出力されるはずです。
+全て正しくセットアップできていれば、ハンマーボタンを押すとファームウェアがビルドされ、.bin ファイルが出力されるはずです。
 
 ## デバッグ
 
 ### デバッガの接続
 
-ARM MCU は、クロック信号(SWCLK) とデータ信号(SWDIO) で構成される Single Wire Debug (SWD) プロトコルを使います。MCUを 完全に操作するには、この2本のワイヤとグラウンドを接続するだけで十分です。ここでは、キーボードは USB を介して電力が供給されると想定しています。手動でリセットボタンを使えるため、RESET 信号は必要ありません。より高度なセットアップのために printf と scanf をホストに非同期にパイプする SWO 信号を使用できますが、私たちのセットアップでは無視します。
+ARM MCU は、クロック信号(SWCLK) とデータ信号(SWDIO) で構成される Single Wire Debug (SWD) プロトコルを使います。MCU を 完全に操作するには、この2本のワイヤとグラウンドを接続するだけで十分です。ここでは、キーボードは USB を介して電力が供給されると想定しています。手動でリセットボタンを使えるため、RESET 信号は必要ありません。より高度なセットアップのために printf と scanf をホストに非同期にパイプする SWO 信号を使用できますが、私たちのセットアップでは無視します。
 
 注意: SWCLK と SWDIO ピンがキーボードのマトリックスで使われていないことを確認してください。もし使われている場合は、一時的に他のピンに切り替えることができます。
 

docs/ja/cli.md

@@ -1,8 +1,8 @@
 # QMK CLI
 
 <!---
-  original document: d598f01cb:cli.md
-  git diff d598f01cb HEAD cli.md | cat
+  original document: d598f01cb:docs/cli.md
+  git diff d598f01cb HEAD -- docs/cli.md | cat
 -->
 
 このページは QMK CLI のセットアップと使用方法について説明します。

docs/ja/cli_configuration.md

@@ -1,8 +1,8 @@
 # QMK CLI 設定
 
 <!---
-  original document: d598f01cb:cli_configuration.md
-  git diff d598f01cb HEAD cli_configuration.md | cat
+  original document: d598f01cb:docs/cli_configuration.md
+  git diff d598f01cb HEAD -- docs/cli_configuration.md | cat
 -->
 
 このドキュメントは `qmk config` がどのように動作するかを説明します。

docs/ja/config_options.md

@@ -1,8 +1,8 @@
 # QMK の設定
 
 <!---
-  original document: 0f43c2652:docs/config_options.md
-  git diff 0f43c2652 HEAD -- docs/config_options.md | cat
+  original document: 9ff61601e:docs/config_options.md
+  git diff 9ff61601e HEAD -- docs/config_options.md | cat
 -->
 
 QMK はほぼ無制限に設定可能です。可能なところはいかなるところでも、やりすぎな程、ユーザーがコードサイズを犠牲にしてでも彼らのキーボードをカスタマイズをすることを許しています。ただし、このレベルの柔軟性により設定が困難になります。
@@ -83,7 +83,7 @@ QMK での全ての利用可能な設定にはデフォルトがあります。
 * `#define BACKLIGHT_PIN B7`
    * バックライトのピン
 * `#define BACKLIGHT_LEVELS 3`
-   * バックライトのレベル数 (off を除いて最大15)
+   * バックライトのレベル数 (off を除いて最大31)
 * `#define BACKLIGHT_BREATHING`
    * バックライトのブレスを有効にします
 * `#define BREATHING_PERIOD 6`
@@ -148,10 +148,14 @@ QMK での全ての利用可能な設定にはデフォルトがあります。
 * `#define IGNORE_MOD_TAP_INTERRUPT`
    * 両方のキーに `TAPPING_TERM` を適用することで、ホールド時に他のキーに変換するキーを使ってローリングコンボ (zx) をすることができるようにします
    * 詳細は [Mod tap interrupt](ja/feature_advanced_keycodes.md#ignore-mod-tap-interrupt) を見てください
+* `#define IGNORE_MOD_TAP_INTERRUPT_PER_KEY`
+   * キーごとの `IGNORE_MOD_TAP_INTERRUPT` 設定の処理を有効にします
 * `#define TAPPING_FORCE_HOLD`
    * タップされた直後に、デュアルロールキーを修飾子として使用できるようにします
    * [Hold after tap](ja/feature_advanced_keycodes.md#tapping-force-hold)を見てください
    * タップトグル機能を無効にします (`TT` あるいは One Shot Tap Toggle)
+* `#define TAPPING_FORCE_HOLD_PER_KEY`
+   * キーごとの `TAPPING_FORCE_HOLD` 設定処理を有効にします。
 * `#define LEADER_TIMEOUT 300`
    * リーダーキーがタイムアウトするまでの時間
       * タイムアウトする前にシーケンスを終了できない場合は、タイムアウトの設定を増やす必要があるかもしれません。あるいは、`LEADER_PER_KEY_TIMING` オプションを有効にすると良いでしょう。これは各キーがタップされた後でタイムアウトを再設定します。
@@ -185,7 +189,7 @@ QMK での全ての利用可能な設定にはデフォルトがあります。
 * `#define RGBLIGHT_SPLIT`
    * 分割キーボードの左半分の RGB LED の出力を右半分の RGB LED の入力につなげるかわりに、それぞれの側で個別にコントローラの出力ピンが直接 RGB LED の入力に繋がっているときは、この定義が必要です。
 * `#define RGBLED_SPLIT { 6, 6 }`
-   * 分割キーボードの各半分の `RGB_DI_PIN` に直接配線されている接続されているLEDの数
+   * 分割キーボードの各半分の `RGB_DI_PIN` に直接配線されている接続されている LED の数
    * 最初の値は左半分の LED の数を示し、2番目の値は右半分です。
    * RGBLED_SPLIT が定義されている場合、RGBLIGHT_SPLIT は暗黙的に定義されます。
 * `#define RGBLIGHT_HUE_STEP 12`
@@ -214,7 +218,7 @@ QMK での全ての利用可能な設定にはデフォルトがあります。
 
 ### 左右の設定
 
-一つ覚えておかなければならないことは、USB ポートが接続されている側が常にマスター側であるということです。USB に接続されていない側はスレーブです。
+1つ覚えておかなければならないことは、USB ポートが接続されている側が常にマスター側であるということです。USB に接続されていない側はスレーブです。
 
 分割キーボードの左右を設定するには、幾つかの異なる方法があります (優先度の順にリストされています):
 
@@ -258,7 +262,7 @@ QMK での全ての利用可能な設定にはデフォルトがあります。
 * `#define SELECT_SOFT_SERIAL_SPEED <speed>` (デフォルトの速度は1です)
    * serial 通信を使う時のプロトコルの速度を設定します。
    * 速度:
-      * 0: 約189kbps (実験目的のみ)
+      * 0: 約 189kbps (実験目的のみ)
       * 1: 約 137kbps (デフォルト)
       * 2: 約 75kbps
       * 3: 約 39kbps

docs/ja/contributing.md

@@ -2,7 +2,7 @@
 
 <!---
   original document: d47809575:docs/contributing.md
-  git diff d47809575 HEAD docs/contributing.md | cat
+  git diff d47809575 HEAD -- docs/contributing.md | cat
 -->
 
 👍🎉 まず、これを読み貢献する時間を作ってくれてありがとうございます！🎉👍

docs/ja/driver_installation_zadig.md

@@ -2,7 +2,7 @@
 
 <!---
   original document: d598f01cb:docs/driver_installation_zadig.md
-  git diff d598f01cb HEAD docs/driver_installation_zadig.md | cat
+  git diff d598f01cb HEAD -- docs/driver_installation_zadig.md | cat
 -->
 
 QMK はホストにたいして通常の HID キーボードデバイスとして振る舞うため特別なドライバは必要ありません。しかし、Windows でのキーボードへの書き込みは、多くの場合、キーボードをリセットした時に現れるブートローダデバイスで*行います*。

docs/ja/faq.md

@@ -2,7 +2,7 @@
 
 <!---
   original document: d598f01cb:docs/faq.md
-  git diff d598f01cb HEAD docs/faq.md | cat
+  git diff d598f01cb HEAD -- docs/faq.md | cat
 -->
 
 * [一般](ja/faq_general.md)

docs/ja/faq_debug.md

@@ -2,7 +2,7 @@
 
 <!---
   original document: 376419a4f:docs/faq_debug.md
-  git diff 376419a4f HEAD docs/faq_debug.md | cat
+  git diff 376419a4f HEAD -- docs/faq_debug.md | cat
 -->
 
 このページは、キーボードのトラブルシューティングについての様々な一般的な質問を説明します。

docs/ja/faq_general.md

@@ -2,7 +2,7 @@
 
 <!---
   original document: d598f01cb:docs/faq_general.md
-  git diff d598f01cb HEAD docs/faq_general.md | cat
+  git diff d598f01cb HEAD -- docs/faq_general.md | cat
 -->
 
 ## QMK とは何か？

docs/ja/faq_keymap.md

@@ -2,7 +2,7 @@
 
 <!---
   original document: 376419a4f:docs/faq_keymap.md
-  git diff 376419a4f HEAD docs/faq_keymap.md | cat
+  git diff 376419a4f HEAD -- docs/faq_keymap.md | cat
 -->
 
 このページは人々がキーマップについてしばしば持つ疑問について説明します。まだ読んだことが無い場合には、[キーマップの概要](ja/keymap.md)を最初に読むべきです。

docs/ja/getting_started_getting_help.md

@@ -1,8 +1,8 @@
 # 助けを得る
 
 <!---
-  original document: d598f01cb:getting_started_getting_help.md
-  git diff d598f01cb HEAD getting_started_getting_help.md | cat
+  original document: d598f01cb:docs/getting_started_getting_help.md
+  git diff d598f01cb HEAD -- docs/getting_started_getting_help.md | cat
 -->
 
 QMK に関して助けを得るための多くのリソースがあります。

docs/ja/getting_started_github.md

@@ -1,8 +1,8 @@
 # QMK で Github を使う方法
 
 <!---
-  original document: d598f01cb:getting_started_github.md
-  git diff d598f01cb HEAD getting_started_github.md | cat
+  original document: d598f01cb:docs/getting_started_github.md
+  git diff d598f01cb HEAD -- docs/getting_started_github.md | cat
 -->
 
 Github は慣れていない人には少し注意が必要です - このガイドは、QMK におけるフォーク、クローン、プルリクエストのサブミットの各ステップについて説明します。

docs/ja/getting_started_introduction.md

@@ -1,8 +1,8 @@
 # はじめに
 
 <!---
-  original document: d598f01cb:getting_started_introduction.md
-  git diff d598f01cb HEAD getting_started_introduction.md | cat
+  original document: d598f01cb:docs/getting_started_introduction.md
+  git diff d598f01cb HEAD -- docs/getting_started_introduction.md | cat
 -->
 
 このページでは、QMK プロジェクトで作業するために知っておくべき基本的な情報について説明しようと思います。Unix シェルの操作に精通していることを前提としていますが、C について、または make を使ったコンパイルについて精通しているとは想定していません。

docs/ja/newbs.md

@@ -3,7 +3,7 @@
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: adf4acf59:docs/newbs.md
-  git diff adf4acf59 HEAD docs/newbs.md | cat
+  git diff adf4acf59 HEAD -- docs/newbs.md | cat
 -->
 
 QMK は、メカニカルキーボード用の強力なオープンソースファームウェアです。

docs/ja/newbs_building_firmware_configurator.md

@@ -3,7 +3,7 @@
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: ed0575fc8:docs/newbs_building_firmware_configurator.md
-  git diff ed0575fc8 HEAD docs/newbs_building_firmware_configurator.md | cat
+  git diff ed0575fc8 HEAD -- docs/newbs_building_firmware_configurator.md | cat
 -->
 
 [QMK Configurator](https://config.qmk.fm) は、QMKファームウェアの hex ファイルを生成するオンライングラフィカルユーザーインターフェイスです。
@@ -63,7 +63,7 @@ QMK Configurator は Chrome/Firefox で最適に動作します。
 
 2分割の右シフト: 両方とも右シフトで埋めます。
 
-左シフトとISOサポート用に1つずつ: 両方とも左シフトで埋めます。
+左シフトと ISO サポート用に1つずつ: 両方とも左シフトで埋めます。
 
 5分割だが4キーのみ: 以前やったことがある人を推測して確認するか尋ねてください。
 
@@ -73,7 +73,7 @@ QMK Configurator は Chrome/Firefox で最適に動作します。
 
 後日、`Import Keymap` ボタンを押すことで、この .json ファイルをロードできます。
 
-!> **注意:** このファイルは、kbfirmware.com またはその他のツールに使用される .jsonファイルと同じ形式ではありません。これらのツールにこれを使用したり、QMK Configurator でこれらのツールの .json を使用しようとすると、キーボードが **爆発** する可能性があります。
+!> **注意:** このファイルは、kbfirmware.com またはその他のツールに使用される .json ファイルと同じ形式ではありません。これらのツールにこれを使用したり、QMK Configurator でこれらのツールの .json を使用しようとすると、キーボードが **爆発** する可能性があります。
 
 ## ファームウェアファイルを生成する
 

docs/ja/newbs_flashing.md

@@ -3,7 +3,7 @@
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: ed0575fc8:docs/newbs_flashing.md
-  git diff ed0575fc8 HEAD docs/newbs_flashing.md | cat
+  git diff ed0575fc8 HEAD -- docs/newbs_flashing.md | cat
 -->
 
 カスタムファームウェアは出来たので、キーボードに書き込みたくなるでしょう/フラッシュしたくなるでしょう。
@@ -13,7 +13,7 @@
 キーボードに書き込む最も簡単な方法は [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) を使うことです。
 
 ただし、QMK Toolbox は、現在は Windows と macOS でしか使えません。
-Linuxを使用している場合(および、コマンドラインでファームウェアを書き込みたい場合)は、下の方で概説する[方法](ja/newbs_flashing.md#flash-your-keyboard-from-the-command-line)で行なう必要があります。
+Linux を使用している場合(および、コマンドラインでファームウェアを書き込みたい場合)は、下の方で概説する[方法](ja/newbs_flashing.md#flash-your-keyboard-from-the-command-line)で行なう必要があります。
 
 ### QMK Toolbox にファイルをロードする
 
@@ -65,7 +65,7 @@ planck_rev5_default.hex
 * 基板(PCB)に付けられている物理的な `RESET` ボタンを押す
 * PCB 上の `BOOT0` か `RESET` のラベルの付いたヘッダピンを探し、PCB 接続中にそれらを互いにショートする
 
-うまくいけば、QMK Toolboxに次のようなメッセージが表示されます。
+うまくいけば、QMK Toolbox に次のようなメッセージが表示されます。
 
 ```
 *** Clueboard - Clueboard 66% HotSwap disconnected -- 0xC1ED:0x2390
@@ -121,7 +121,7 @@ QMK Toolbox の `Flash` ボタンをクリックします。
 この場合、あなたは明示的にブートローダを指定する方法を使わなければなりません。
 
 ブートローダは主に 5 種類のものが使われています。
-Pro Micro とそのクローンは Caterina を、Teensy は HalfKay を、OLKBの AVR ボードは QMK-DFU を、その他の ATmega32U4 ボードは DFU を、そして多くの ARM ボードは ARM DFU を使います。
+Pro Micro とそのクローンは Caterina を、Teensy は HalfKay を、OLKB の AVR ボードは QMK-DFU を、その他の ATmega32U4 ボードは DFU を、そして多くの ARM ボードは ARM DFU を使います。
 
 より詳しいブートローダの情報は、[Flashing Instructions and Bootloader Information](ja/flashing.md) にあります。
 
@@ -178,10 +178,10 @@ Checking file size of planck_rev5_xyverz.hex
 
 ファームウェアを DFU デバイスに書き込むために使用できる DFU コマンドがいくつかあります。
 
-* `:dfu` - これが通常のオプションで、DFUデバイスが使用可能になるまで待機したのちファームウェアを書き込みます。5秒ごとに、DFUデバイスが存在するかチェックしています。
+* `:dfu` - これが通常のオプションで、DFU デバイスが使用可能になるまで待機したのちファームウェアを書き込みます。5秒ごとに、DFU デバイスが存在するかチェックしています。
 * `:dfu-ee` - 通常の hex ファイルの代わりに `eep` ファイルを書き込みます。これを使用するのはまれです。
-* `:dfu-split-left` - デフォルトオプション (`:dfu`) と同様に、通常のファームウェアが書き込まれます。ただし、分割キーボードの「左側の」 EEPROMファイルも書き込まれます。_これは、Elite C ベースの分割キーボードに最適です。_
-* `:dfu-split-right` - デフォルトオプション (`:dfu`) と同様に、通常のファームウェアが書き込まれます。ただし、分割キーボードの「右側の」EEPROMファイルも書き込まれます。_これは、Elite C ベースの分割キーボードに最適です。_
+* `:dfu-split-left` - デフォルトオプション (`:dfu`) と同様に、通常のファームウェアが書き込まれます。ただし、分割キーボードの「左側の」 EEPROM ファイルも書き込まれます。_これは、Elite C ベースの分割キーボードに最適です。_
+* `:dfu-split-right` - デフォルトオプション (`:dfu`) と同様に、通常のファームウェアが書き込まれます。ただし、分割キーボードの「右側の」EEPROM ファイルも書き込まれます。_これは、Elite C ベースの分割キーボードに最適です。_
 
 
 ### Caterina 
@@ -259,8 +259,8 @@ avrdude.exe done.  Thank you.
 
 * `:avrdude` - これが通常のオプションで、Caterina デバイスが(新しい COM ポートを検出して)使用可能になるまで待機し、ファームウェアを書き込みます。
 * `:avrdude-loop` - これは `:avrdude` と同じです。ただし書き込みが終了すると再び Caterina デバイスの書き込み待ちに戻ります。これは何台ものデバイスへの書き込みに便利です。_Control+C を押して、手動でこの繰り返しを終了させる必要があります。_
-* `:avrdude-split-left` - デフォルトオプション(`:avrdude`)と同様に通常のファームウェアが書き込まれます。ただし、分割キーボードの「左側の」EEPROMファイルもフラッシュされます。 _これは、Pro Micro ベースの分割キーボードに最適です。_
-* `:avrdude-split-right` - デフォルトオプション(`:avrdude`)と同様に通常のファームウェアが書き込まれます。ただし、分割キーボードの「右側の」EEPROMファイルもフラッシュされます。 _これは、Pro Micro ベースの分割キーボードに最適です。_
+* `:avrdude-split-left` - デフォルトオプション(`:avrdude`)と同様に通常のファームウェアが書き込まれます。ただし、分割キーボードの「左側の」EEPROM ファイルもフラッシュされます。 _これは、Pro Micro ベースの分割キーボードに最適です。_
+* `:avrdude-split-right` - デフォルトオプション(`:avrdude`)と同様に通常のファームウェアが書き込まれます。ただし、分割キーボードの「右側の」EEPROM ファイルもフラッシュされます。 _これは、Pro Micro ベースの分割キーボードに最適です。_
 
 ### HalfKay
 

docs/ja/newbs_getting_started.md

@@ -2,8 +2,8 @@
 
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
-  original document: docs/newbs_getting_started.md
-  git diff 161d469 HEAD docs/newbs_getting_started.md | cat
+  original document: 161d469:docs/newbs_getting_started.md
+  git diff 161d469 HEAD -- docs/newbs_getting_started.md | cat
 -->
 
 キーボードにはプロセッサが入っており、それはコンピュータに入っているものと大して違わないものです。
@@ -12,7 +12,7 @@ QMK は、そのソフトウェアの役割を果たし、ボタンの押下を
 カスタムキーマップを作るということは、キーボード上で動くプログラムを作るということなのです。
 
 QMK は、簡単なことは簡単に、そして、難しいことを可能なことにすることで、あなたの手にたくさんのパワーをもたらします。
-パワフルなキーマップを作るためにプログラムを作成する方法を知る必要はありません。いくつかのシンプルな文法に従うだけでOKです。
+パワフルなキーマップを作るためにプログラムを作成する方法を知る必要はありません。いくつかのシンプルな文法に従うだけで OK です。
 
 # はじめに
 

docs/ja/newbs_git_best_practices.md

@@ -3,7 +3,7 @@
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: adf4acf59:docs/newbs_git_best_practices.md
-  git diff adf4acf59 HEAD docs/newbs_git_best_practices.md | cat
+  git diff adf4acf59 HEAD -- docs/newbs_git_best_practices.md | cat
 -->
 
 ## または、"如何にして私は心配することをやめて Git を愛することを学んだか。"

docs/ja/newbs_git_resolving_merge_conflicts.md

@@ -3,7 +3,7 @@
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: adf4acf59:docs/newbs_git_resolving_merge_conflicts.md
-  git diff adf4acf59 HEAD docs/newbs_git_resolving_merge_conflicts.md | cat
+  git diff adf4acf59 HEAD -- docs/newbs_git_resolving_merge_conflicts.md | cat
 -->
 
 ブランチでの作業の完了に時間がかかる場合、他の人が行った変更が、プルリクエストを開いたときにブランチに加えた変更と競合することがあります。

docs/ja/newbs_git_resynchronize_a_branch.md

@@ -3,11 +3,11 @@
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: adf4acf59:docs/newbs_git_resynchronize_a_branch.md
-  git diff adf4acf59 HEAD docs/newbs_git_resynchronize_a_branch.md | cat
+  git diff adf4acf59 HEAD -- docs/newbs_git_resynchronize_a_branch.md | cat
 -->
 
 仮にあなたの `master` ブランチにあなたのコミットを行い、そしてあなたの QMK リポジトリの更新が必要になったとします。
-(フォーク元の) QMKの `master` ブランチをあなたの `master` ブランチに `git pull` することもできますが、GitHub は、あなたのブランチが `qmk:master` より何コミットか先行していると通知します、この状態で QMK にプルリクエストを行う場合、問題が発生する可能性があります。
+(フォーク元の) QMK の `master` ブランチをあなたの `master` ブランチに `git pull` することもできますが、GitHub は、あなたのブランチが `qmk:master` より何コミットか先行していると通知します、この状態で QMK にプルリクエストを行う場合、問題が発生する可能性があります。
 (訳注：この通知は、GitHub のあなたのリポジトリの code ペインのブランチ選択メニューの下のあたりで `This branch is 3 commit ahead of qmk:master` という様な文面で表示されています。)
 
 ?> このドキュメントは [あなたのフォークの master ブランチ: 更新は頻繁に、コミットはしないこと](ja/newbs_git_using_your_master_branch.md) で詳述されている概念に基づいています。その概念に慣れていない場合は、まずそれを読んでから、ここに戻ってください。  

docs/ja/newbs_git_using_your_master_branch.md

@@ -3,7 +3,7 @@
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: adf4acf59:docs/newbs_git_using_your_master_branch.md
-  git diff adf4acf59 HEAD docs/newbs_git_using_your_master_branch.md | cat
+  git diff adf4acf59 HEAD -- docs/newbs_git_using_your_master_branch.md | cat
 -->
 
 QMK の開発では、何がどこで行われているかにかかわらず、`master` ブランチを最新の状態に保つことを強くお勧めします、しかし `master` ブランチには***絶対に直接コミットしないでください***。
@@ -41,7 +41,7 @@ upstream        https://github.com/qmk/qmk_firmware.git (push)
 このコマンドは `upstream` というニックネームを持つ QMK リポジトリから、ブランチとタグ &mdash; "refs" と総称されます &mdash; を取得します。
 これで、あなたのフォーク `origin` のデータを QMK が保持するデータと比較できます。
 
-あなたのフォークの `master` を更新するには、次を実行します、各行の後にEnterキーを押してください:
+あなたのフォークの `master` を更新するには、次を実行します、各行の後に Enter キーを押してください:
 
 ```
 git checkout master
@@ -98,4 +98,4 @@ git commit -m "My commit message."
 
 最後のステップは、変更をフォークにプッシュすることです。
 これを行うには、`git push`と入力します。
-Gitは、 `dev_branch`の現在の状態をフォークに公開します。
+Git は、 `dev_branch`の現在の状態をフォークに公開します。

docs/ja/newbs_learn_more_resources.md

@@ -3,10 +3,10 @@
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: ed0575fc8:docs/newbs_learn_more_resources.md
-  git diff ed0575fc8 HEAD docs/newbs_learn_more_resources.md | cat
+  git diff ed0575fc8 HEAD -- docs/newbs_learn_more_resources.md | cat
 -->
 
-これらのリソースは、QMKコミュニティの新しいメンバーに、初心者向けドキュメントで提供されている情報に対する理解を深めることを目的としています。
+これらのリソースは、QMK コミュニティの新しいメンバーに、初心者向けドキュメントで提供されている情報に対する理解を深めることを目的としています。
 
 ## Git に関するリース:
 

docs/ja/newbs_testing_debugging.md

@@ -3,7 +3,7 @@
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: ed0575fc8:docs/newbs_testing_debugging.md
-  git diff ed0575fc8 HEAD docs/newbs_testing_debugging.md | cat
+  git diff ed0575fc8 HEAD -- docs/newbs_testing_debugging.md | cat
 -->
 
 カスタムファームウェアをキーボードへ書き込んだら、テストする準備が整います。運が良ければ全て問題なく動作しているはずですが、もしそうでなければこのドキュメントがどこが悪いのか調べるのに役立ちます。
@@ -12,7 +12,7 @@
 
 通常、キーボードをテストするのは非常に簡単です。全てのキーをひとつずつ押して、期待されるキーが送信されていることを確認します。キーを押したことを見逃さないためのプログラムもあります。
 
-メモ：　これらのプログラムはQMKによって提供・承認されたものではありません。
+メモ：　これらのプログラムは QMK によって提供・承認されたものではありません。
 
 * [QMK Configurator](https://config.qmk.fm/#/test/) (Web Based)
 * [Switch Hitter](https://web.archive.org/web/20190413233743/https://elitekeyboards.com/switchhitter.php) (Windows Only)
@@ -40,7 +40,7 @@ void keyboard_post_init_user(void) {
 
 ### hid_listenを使ったデバッグ
 
-ターミナルベースの方法がお好みですか？PJRCが提供する[hid_listen](https://www.pjrc.com/teensy/hid_listen.html)もデバッグメッセージの表示に使用できます。ビルド済みの実行ファイルはWindows, Linux, MacOS用が用意されています。
+ターミナルベースの方法がお好みですか？PJRC が提供する[hid_listen](https://www.pjrc.com/teensy/hid_listen.html)もデバッグメッセージの表示に使用できます。ビルド済みの実行ファイルは Windows, Linux, MacOS 用が用意されています。
 
 <!-- FIXME: Describe the debugging messages here. -->
 
@@ -50,7 +50,7 @@ void keyboard_post_init_user(void) {
 
     #include <print.h>
 
-そのあとは、いくつかの異なったprint関数を使用することが出来ます。
+そのあとは、いくつかの異なった print 関数を使用することが出来ます。
 
 * `print("string")`: シンプルな文字列を出力します
 * `uprintf("%s string", var)`: フォーマットされた文字列を出力します

docs/keycodes.md

@@ -208,24 +208,11 @@ This is a reference only. Each group of keys links to the page documenting their
 
 ## [Quantum Keycodes](quantum_keycodes.md#qmk-keycodes)
 
-|Key            |Aliases    |Description                                                          |
-|---------------|-----------|---------------------------------------------------------------------|
-|`RESET`        |           |Put the keyboard into DFU mode for flashing                          |
-|`DEBUG`        |           |Toggle debug mode                                                    |
-|`EEPROM_RESET` |`EEP_RST`  |Resets EEPROM state by reinitializing it                             |
-|`KC_GESC`      |`GRAVE_ESC`|Escape when tapped, <code>&#96;</code> when pressed with Shift or GUI|
-|`KC_LSPO`      |           |Left Shift when held, `(` when tapped                                |
-|`KC_RSPC`      |           |Right Shift when held, `)` when tapped                               |
-|`KC_LCPO`      |           |Left Control when held, `(` when tapped                              |
-|`KC_RCPC`      |           |Right Control when held, `)` when tapped                             |
-|`KC_LAPO`      |           |Left Alt when held, `(` when tapped                                  |
-|`KC_RAPC`      |           |Right Alt when held, `)` when tapped                                 |
-|`KC_SFTENT`    |           |Right Shift when held, Enter when tapped                             |
-|`KC_LEAD`      |           |The [Leader key](feature_leader_key.md)                              |
-|`KC_LOCK`      |           |The [Lock key](feature_key_lock.md)                                  |
-|`FUNC(n)`      |`F(n)`     |Call `fn_action(n)` (deprecated)                                     |
-|`M(n)`         |           |Call macro `n`                                                       |
-|`MACROTAP(n)`  |           |Macro-tap `n` idk FIXME                                              |
+|Key           |Aliases  |Description                                            |
+|--------------|---------|-------------------------------------------------------|
+|`RESET`       |         |Put the keyboard into bootloader mode for flashing     |
+|`DEBUG`       |         |Toggle debug mode                                      |
+|`EEPROM_RESET`|`EEP_RST`|Reinitializes the keyboard's EEPROM (persistent memory)|
 
 ## [Audio Keys](feature_audio.md)
 
@@ -299,7 +286,7 @@ This is a reference only. Each group of keys links to the page documenting their
 
 ## [Dynamic Macros](feature_dynamic_macros.md)
 
-|Key              |Alias    |Description                                       |
+|Key              |Aliases  |Description                                       |
 |-----------------|---------|--------------------------------------------------|
 |`DYN_REC_START1` |`DM_REC1`|Start recording Macro 1                           |
 |`DYN_REC_START2` |`DM_REC2`|Start recording Macro 2                           |
@@ -307,6 +294,18 @@ This is a reference only. Each group of keys links to the page documenting their
 |`DYN_MACRO_PLAY2`|`DM_PLY2`|Replay Macro 2                                    |
 |`DYN_REC_STOP`   |`DM_RSTP`|Finish the macro that is currently being recorded.|
 
+## [Grave Escape](feature_grave_esc.md)
+
+|Key        |Aliases  |Description                                                       |
+|-----------|---------|------------------------------------------------------------------|
+|`GRAVE_ESC`|`KC_GESC`|Escape when pressed, <code>&#96;</code> when Shift or GUI are held|
+
+## [Key Lock](feature_key_lock.md)
+
+|Key      |Description                                                   |
+|---------|--------------------------------------------------------------|
+|`KC_LOCK`|Hold down the next key pressed, until the key is pressed again|
+
 ## [Layer Switching](feature_advanced_keycodes.md#switching-and-toggling-layers)
 
 |Key             |Description                                                                       |
@@ -320,6 +319,12 @@ This is a reference only. Each group of keys links to the page documenting their
 |`TO(layer)`     |Turns on `layer` and turns off all other layers, except the default layer |
 |`TT(layer)`     |Normally acts like MO unless it's tapped multiple times, which toggles `layer` on |
 
+## [Leader Key](feature_leader_key.md)
+
+|Key      |Description             |
+|---------|------------------------|
+|`KC_LEAD`|Begins a leader sequence|
+
 ## [Mouse Keys](feature_mouse_keys.md)
 
 |Key             |Aliases  |Description                |
@@ -461,6 +466,18 @@ This is a reference only. Each group of keys links to the page documenting their
 |`OSM(mod)`  |Hold `mod` for one keypress       |
 |`OSL(layer)`|Switch to `layer` for one keypress|
 
+## [Space Cadet](feature_space_cadet.md)
+
+|Key        |Description                             |
+|-----------|----------------------------------------|
+|`KC_LCPO`  |Left Control when held, `(` when tapped |
+|`KC_RCPC`  |Right Control when held, `)` when tapped|
+|`KC_LSPO`  |Left Shift when held, `(` when tapped   |
+|`KC_RSPC`  |Right Shift when held, `)` when tapped  |
+|`KC_LAPO`  |Left Alt when held, `(` when tapped     |
+|`KC_RAPC`  |Right Alt when held, `)` when tapped    |
+|`KC_SFTENT`|Right Shift when held, Enter when tapped|
+
 ## [Swap Hands](feature_swap_hands.md)
 
 |Key        |Description                                                              |

docs/porting_your_keyboard_to_qmk_(arm_and_other_chibios_cpus).md

@@ -38,7 +38,7 @@ To configure a keyboard where each switch is connected to a separate pin and gro
 
 `BACKLIGHT_BREATHING` is a fancier backlight feature that adds breathing/pulsing/fading effects to the backlight. It uses the same timer as the normal backlight. These breathing effects must be called by code in your keymap.
 
-`BACKLIGHT_LEVELS` is how many levels exist for your backlight - max is 15, and they are computed automatically from this number.
+`BACKLIGHT_LEVELS` is how many levels exist for your backlight - max is 31, and they are computed automatically from this number.
 
 ## `/keyboards/<keyboard>/Makefile`
 

docs/quantum_keycodes.md

@@ -8,21 +8,8 @@ On this page we have documented keycodes between `0x00FF` and `0xFFFF` which are
 
 ## QMK Keycodes
 
-|Key            |Aliases    |Description                                                          |
-|---------------|-----------|---------------------------------------------------------------------|
-|`RESET`        |           |Put the keyboard into DFU mode for flashing                          |
-|`DEBUG`        |           |Toggle debug mode                                                    |
-|`EEPROM_RESET` |`EEP_RST`  |Resets EEPROM state by reinitializing it                             |
-|`KC_GESC`      |`GRAVE_ESC`|Escape when tapped, <code>&#96;</code> when pressed with Shift or GUI|
-|`KC_LSPO`      |           |Left Shift when held, `(` when tapped                                |
-|`KC_RSPC`      |           |Right Shift when held, `)` when tapped                               |
-|`KC_LCPO`      |           |Left Control when held, `(` when tapped                              |
-|`KC_RCPC`      |           |Right Control when held, `)` when tapped                             |
-|`KC_LAPO`      |           |Left Alt when held, `(` when tapped                                  |
-|`KC_RAPC`      |           |Right Alt when held, `)` when tapped                                 |
-|`KC_SFTENT`    |           |Right Shift when held, Enter when tapped                             |
-|`KC_LEAD`      |           |The [Leader key](feature_leader_key.md)                              |
-|`KC_LOCK`      |           |The [Lock key](feature_key_lock.md)                                  |
-|`FUNC(n)`      |`F(n)`     |Call `fn_action(n)` (deprecated)                                     |
-|`M(n)`         |           |Call macro `n`                                                       |
-|`MACROTAP(n)`  |           |Macro-tap `n` idk FIXME                                              |
+|Key           |Aliases  |Description                                            |
+|--------------|---------|-------------------------------------------------------|
+|`RESET`       |         |Put the keyboard into bootloader mode for flashing     |
+|`DEBUG`       |         |Toggle debug mode                                      |
+|`EEPROM_RESET`|`EEP_RST`|Reinitializes the keyboard's EEPROM (persistent memory)|

docs/zh-cn/_summary.md

@@ -3,30 +3,41 @@
   * [构建你的第一个固件](zh-cn/newbs_building_firmware.md)
   * [刷新固件](zh-cn/newbs_flashing.md)
   * [测试和调试](zh-cn/newbs_testing_debugging.md)
-  * [Git最佳实践](zh-cn/newbs_best_practices.md)
+  * [Git最佳实践](zh-cn/newbs_git_best_practices.md)
+    * [使用你分叉(fork)的主分支(master)](zh-cn/newbs_git_using_your_master_branch.md)
+    * [解决合并冲突](zh-cn/newbs_git_resolving_merge_conflicts.md)
+    * [重新同步一个分支](zh-cn/newbs_git_resynchronize_a_branch.md)
   * [学习资源](zh-cn/newbs_learn_more_resources.md)
 
 * [QMK基础](zh-cn/README.md)
   * [QMK简介](zh-cn/getting_started_introduction.md)
-  * [向QMK贡献](zh-cn/contributing.md)
+  * [QMK命令行工具](zh-cn/cli.md)
+  * [QMK命令行工具配置](zh-cn/cli_configuration.md)
+  * [向QMK贡献代码](zh-cn/contributing.md)
   * [如何使用Github](zh-cn/getting_started_github.md)
   * [获得帮助](zh-cn/getting_started_getting_help.md)
 
-* [问题解答](zh-cn/faq.md)
+* [非兼容性修改](zh-cn/breaking_changes.md)
+  * [我的PR已经被标记为非兼容性修改](zh-cn/breaking_changes_instructions.md)
+  * [2019年8月30日](zh-cn/ChangeLog/20190830.md)
+
+* [问题与解答](zh-cn/faq.md)
   * [一般问题](zh-cn/faq_general.md)
   * [构建/编译](zh-cn/faq_build.md)
   * [调试/故障排除](zh-cn/faq_debug.md)
-  * [键盘映射](zh-cn/faq_keymap.md)
+  * [布局](zh-cn/faq_keymap.md)
+  * [Zadig驱动安装](zh-cn/driver_installation_zadig.md)
 
 * 详细指南
   * [安装构建工具](zh-cn/getting_started_build_tools.md)
   * [vagrant指南](zh-cn/getting_started_vagrant.md)
-  * [构建/编译指令](zh-cn/getting_started_make_guide.md)
+  * [构建/编译指南](zh-cn/getting_started_make_guide.md)
   * [刷新固件](zh-cn/flashing.md)
   * [定制功能](zh-cn/custom_quantum_functions.md)
-  * [映射概述](zh-cn/keymap.md)
+  * [布局概述](zh-cn/keymap.md)
 
 * [硬件](zh-cn/hardware.md)
+  * [兼容的单片机](zh-cn/compatible_microcontrollers.md)
   * [AVR处理器](zh-cn/hardware_avr.md)
   * [驱动](zh-cn/hardware_drivers.md)
 
@@ -34,13 +45,16 @@
   * [键盘指南](zh-cn/hardware_keyboard_guidelines.md)
   * [配置选项](zh-cn/config_options.md)
   * [键码](zh-cn/keycodes.md)
-  * [记录最佳实践](zh-cn/documentation_best_practices.md)
+  * [代码书写规范 - C](zh-cn/coding_conventions_c.md)
+  * [代码书写规范 - Python](zh-cn/coding_conventions_python.md)
+  * [文档书写规范](zh-cn/documentation_best_practices.md)
   * [文档模板](zh-cn/documentation_templates.md)
   * [术语表](zh-cn/reference_glossary.md)
   * [单元测试](zh-cn/unit_testing.md)
-  * [有用的功能](zh-cn/ref_functions.md)
+  * [实用函数](zh-cn/ref_functions.md)
   * [配置器支持](zh-cn/reference_configurator_support.md)
   * [info.json 格式](zh-cn/reference_info_json.md)
+  * [Python 命令行开发](zh-cn/cli_development.md)
 
 * [特性](zh-cn/features.md)
   * [基本键码](zh-cn/keycodes_basic.md)
@@ -54,22 +68,27 @@
   * [热改键](zh-cn/feature_bootmagic.md)
   * [组合](zh-cn/feature_combo)
   * [命令](zh-cn/feature_command.md)
+  * [消抖 API](zh-cn/feature_debounce_type.md)
   * [拨动开关](zh-cn/feature_dip_switch.md)
   * [动态宏指令](zh-cn/feature_dynamic_macros.md)
   * [编码器](zh-cn/feature_encoders.md)
   * [重音号Esc复合键](zh-cn/feature_grave_esc.md)
+  * [触摸反馈](zh-cn/feature_haptic_feedback.md)
+  * [HD44780 LCD控制器](zh-cn/feature_hd44780.md)
   * [自锁键](zh-cn/feature_key_lock.md)
   * [布局](zh-cn/feature_layouts.md)
   * [前导键](zh-cn/feature_leader_key.md)
   * [LED阵列](zh-cn/feature_led_matrix.md)
   * [宏指令](zh-cn/feature_macros.md)
   * [鼠标键](zh-cn/feature_mouse_keys.md)
+  * [OLED驱动](zh-cn/feature_oled_driver.md)
   * [一键功能](zh-cn/feature_advanced_keycodes.md#one-shot-keys)
   * [指针设备](zh-cn/feature_pointing_device.md)
   * [PS/2鼠标](zh-cn/feature_ps2_mouse.md)
   * [RGB灯光](zh-cn/feature_rgblight.md)
   * [RGB矩阵](zh-cn/feature_rgb_matrix.md)
   * [空格候补换挡](zh-cn/feature_space_cadet.md)
+  * [分体键盘](zh-cn/feature_split_keyboard.md)
   * [速录机](zh-cn/feature_stenography.md)
   * [换手](zh-cn/feature_swap_hands.md)
   * [多击键](zh-cn/feature_tap_dance.md)
@@ -79,28 +98,35 @@
   * [用户空间](zh-cn/feature_userspace.md)
   * [速度键](zh-cn/feature_velocikey.md)
 
-* 针对制造者和定制者
+* 制造和定制者指南
   * [手工连线指南](zh-cn/hand_wire.md)
   * [ISP刷新指南](zh-cn/isp_flashing_guide.md)
   * [ARM调试指南](zh-cn/arm_debugging.md)
-  * [I2C驱动](zh-cn/i2c_driver.md)
-  * [GPIO控制器](zh-cn/internals_gpio_control.md)
+  * [ADC设备](zh-cn/adc_driver.md)
+  * [I2C设备](zh-cn/i2c_driver.md)
+  * [WS2812设备](zh-cn/ws2812_driver.md)
+  * [EEPROM设备](zh-cn/eeprom_driver.md)
+  * [GPIO控制](zh-cn/internals_gpio_control.md)
+  * [自定义键盘矩阵](zh-cn/custom_matrix.md)
   * [Proton C转换](zh-cn/proton_c_conversion.md)
 
 * 深入了解
-  * [键盘如何工作](zh-cn/how_keyboards_work.md)
-  * [理解QMK](zh-cn/understanding_qmk.md)
+  * [键盘工作原理](zh-cn/how_keyboards_work.md)
+  * [深入了解QMK](zh-cn/understanding_qmk.md)
 
 * 其他话题
   * [使用Eclipse开发QMK](zh-cn/other_eclipse.md)
   * [使用VSCode开发QMK](zh-cn/other_vscode.md)
   * [支持](zh-cn/support.md)
+  * [翻译QMK文档](zh-cn/translating.md)
 
 * QMK 内构 (正在编写)
   * [定义](zh-cn/internals_defines.md)
   * [输入回调寄存器](zh-cn/internals_input_callback_reg.md)
   * [Midi设备](zh-cn/internals_midi_device.md)
-  * [Midi设备设置过程](zh-cn/internals_midi_device_setup_process.md)
+  * [Midi设备配置过程](zh-cn/internals_midi_device_setup_process.md)
   * [Midi工具库](zh-cn/internals_midi_util.md)
   * [发送函数](zh-cn/internals_send_functions.md)
   * [Sysex工具](zh-cn/internals_sysex_tools.md)
+<!--fromen:20200126-6:03AM(GMT+8)-->
+<!--cn:20200211-11:04AM(GMT+8)-->

doxygen-todo

@@ -6,7 +6,6 @@ tmk_core/protocol/lufa
 tmk_core/protocol/midi
 tmk_core/protocol/midi/bytequeue
 tmk_core/protocol/midi/Config
-tmk_core/protocol/pjrc
 tmk_core/protocol/usb_hid
 tmk_core/protocol/vusb
 tmk_core/tool

drivers/arm/i2c_master.c

@@ -29,8 +29,6 @@
 #include <string.h>
 #include <hal.h>
 
-static uint8_t i2c_address;
-
 static const I2CConfig i2cconfig = {
 #ifdef USE_I2CV1
     I2C1_OPMODE,
@@ -71,27 +69,49 @@ __attribute__((weak)) void i2c_init(void) {
 }
 
 i2c_status_t i2c_start(uint8_t address) {
-    i2c_address = address;
+#if I2C_USE_MUTUAL_EXCLUSION
+    i2cAcquireBus(&I2C_DRIVER);
+#endif
+
     i2cStart(&I2C_DRIVER, &i2cconfig);
     return I2C_STATUS_SUCCESS;
 }
 
 i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) {
-    i2c_address = address;
+#if I2C_USE_MUTUAL_EXCLUSION
+    i2cAcquireBus(&I2C_DRIVER);
+#endif
+
     i2cStart(&I2C_DRIVER, &i2cconfig);
-    msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, MS2ST(timeout));
+    msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (address >> 1), data, length, 0, 0, MS2ST(timeout));
+
+#if I2C_USE_MUTUAL_EXCLUSION
+    i2cReleaseBus(&I2C_DRIVER);
+#endif
+
     return chibios_to_qmk(&status);
 }
 
 i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) {
-    i2c_address = address;
+#if I2C_USE_MUTUAL_EXCLUSION
+    i2cAcquireBus(&I2C_DRIVER);
+#endif
+
     i2cStart(&I2C_DRIVER, &i2cconfig);
-    msg_t status = i2cMasterReceiveTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, MS2ST(timeout));
+    msg_t status = i2cMasterReceiveTimeout(&I2C_DRIVER, (address >> 1), data, length, MS2ST(timeout));
+
+#if I2C_USE_MUTUAL_EXCLUSION
+    i2cReleaseBus(&I2C_DRIVER);
+#endif
+
     return chibios_to_qmk(&status);
 }
 
 i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) {
-    i2c_address = devaddr;
+#if I2C_USE_MUTUAL_EXCLUSION
+    i2cAcquireBus(&I2C_DRIVER);
+#endif
+
     i2cStart(&I2C_DRIVER, &i2cconfig);
 
     uint8_t complete_packet[length + 1];
@@ -100,15 +120,34 @@ i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data,
     }
     complete_packet[0] = regaddr;
 
-    msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, MS2ST(timeout));
+    msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (devaddr >> 1), complete_packet, length + 1, 0, 0, MS2ST(timeout));
+
+#if I2C_USE_MUTUAL_EXCLUSION
+    i2cReleaseBus(&I2C_DRIVER);
+#endif
+
     return chibios_to_qmk(&status);
 }
 
 i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) {
-    i2c_address = devaddr;
+#if I2C_USE_MUTUAL_EXCLUSION
+    i2cAcquireBus(&I2C_DRIVER);
+#endif
+
     i2cStart(&I2C_DRIVER, &i2cconfig);
-    msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), &regaddr, 1, data, length, MS2ST(timeout));
+    msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (devaddr >> 1), &regaddr, 1, data, length, MS2ST(timeout));
+
+#if I2C_USE_MUTUAL_EXCLUSION
+    i2cReleaseBus(&I2C_DRIVER);
+#endif
+
     return chibios_to_qmk(&status);
 }
 
-void i2c_stop(void) { i2cStop(&I2C_DRIVER); }
+void i2c_stop(void) {
+    i2cStop(&I2C_DRIVER);
+
+#if I2C_USE_MUTUAL_EXCLUSION
+    i2cReleaseBus(&I2C_DRIVER);
+#endif
+}

drivers/boards/STM32_F103_STM32DUINO/board.h

@@ -24,8 +24,8 @@
 /*
  * Board identifier.
  */
-#define BOARD_GENERIC_STM32_F103
-#define BOARD_NAME              "Generic STM32F103x board"
+#define BOARD_STM32_F103_STM32DUINO
+#define BOARD_NAME              "GENERIC STM32F103C8T6 board - stm32duino bootloader"
 
 /*
  * Board frequencies.

drivers/boards/STM32_F103_STM32DUINO/board.mk

@@ -0,0 +1,5 @@
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/boards/STM32_F103_STM32DUINO/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/boards/STM32_F103_STM32DUINO

drivers/eeprom/eeprom_custom.c-template

@@ -0,0 +1,46 @@
+/* Copyright 2019 Nick Brassel (tzarc)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdint.h>
+#include <string.h>
+
+#include "eeprom_driver.h"
+
+void eeprom_driver_init(void) {
+    /* Any initialisation code */
+ }
+
+void eeprom_driver_erase(void) {
+    /* Wipe out the EEPROM, setting values to zero */
+}
+
+void eeprom_read_block(void *buf, const void *addr, size_t len) {
+    /*
+        Read a block of data:
+            buf: target buffer
+            addr: 0-based offset within the EEPROM
+            len: length to read
+     */
+}
+
+void eeprom_write_block(const void *buf, void *addr, size_t len) {
+    /*
+        Write a block of data:
+            buf: target buffer
+            addr: 0-based offset within the EEPROM
+            len: length to write
+     */
+}

drivers/eeprom/eeprom_driver.c

@@ -0,0 +1,73 @@
+/* Copyright 2019 Nick Brassel (tzarc)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdint.h>
+#include <string.h>
+
+#include "eeprom_driver.h"
+
+uint8_t eeprom_read_byte(const uint8_t *addr) {
+    uint8_t ret;
+    eeprom_read_block(&ret, addr, 1);
+    return ret;
+}
+
+uint16_t eeprom_read_word(const uint16_t *addr) {
+    uint16_t ret;
+    eeprom_read_block(&ret, addr, 2);
+    return ret;
+}
+
+uint32_t eeprom_read_dword(const uint32_t *addr) {
+    uint32_t ret;
+    eeprom_read_block(&ret, addr, 4);
+    return ret;
+}
+
+void eeprom_write_byte(uint8_t *addr, uint8_t value) { eeprom_write_block(&value, addr, 1); }
+
+void eeprom_write_word(uint16_t *addr, uint16_t value) { eeprom_write_block(&value, addr, 2); }
+
+void eeprom_write_dword(uint32_t *addr, uint32_t value) { eeprom_write_block(&value, addr, 4); }
+
+void eeprom_update_block(const void *buf, void *addr, size_t len) {
+    uint8_t read_buf[len];
+    eeprom_read_block(read_buf, addr, len);
+    if (memcmp(buf, read_buf, len) != 0) {
+        eeprom_write_block(buf, addr, len);
+    }
+}
+
+void eeprom_update_byte(uint8_t *addr, uint8_t value) {
+    uint8_t orig = eeprom_read_byte(addr);
+    if (orig != value) {
+        eeprom_write_byte(addr, value);
+    }
+}
+
+void eeprom_update_word(uint16_t *addr, uint16_t value) {
+    uint16_t orig = eeprom_read_word(addr);
+    if (orig != value) {
+        eeprom_write_word(addr, value);
+    }
+}
+
+void eeprom_update_dword(uint32_t *addr, uint32_t value) {
+    uint32_t orig = eeprom_read_dword(addr);
+    if (orig != value) {
+        eeprom_write_dword(addr, value);
+    }
+}

drivers/eeprom/eeprom_driver.h

@@ -0,0 +1,22 @@
+/* Copyright 2019 Nick Brassel (tzarc)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "eeprom.h"
+
+void eeprom_driver_init(void);
+void eeprom_driver_erase(void);

drivers/eeprom/eeprom_i2c.c

@@ -0,0 +1,120 @@
+/* Copyright 2019 Nick Brassel (tzarc)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdint.h>
+#include <string.h>
+
+/*
+    Note that the implementations of eeprom_XXXX_YYYY on AVR are normally
+    provided by avr-libc. The same functions are reimplemented below and are
+    rerouted to the external i2c equivalent.
+
+    Seemingly, as this is compiled from within QMK, the object file generated
+    during the build overrides the avr-libc implementation during the linking
+    stage.
+
+    On other platforms such as ARM, there are no provided implementations, so
+    there is nothing to override during linkage.
+*/
+
+#include "wait.h"
+#include "i2c_master.h"
+#include "eeprom.h"
+#include "eeprom_i2c.h"
+
+// #define DEBUG_EEPROM_OUTPUT
+
+#ifdef DEBUG_EEPROM_OUTPUT
+#    include "print.h"
+#endif  // DEBUG_EEPROM_OUTPUT
+
+static inline void init_i2c_if_required(void) {
+    static int done = 0;
+    if (!done) {
+        i2c_init();
+        done = 1;
+    }
+}
+
+static inline void fill_target_address(uint8_t *buffer, const void *addr) {
+    intptr_t p = (intptr_t)addr;
+    for (int i = 0; i < EXTERNAL_EEPROM_ADDRESS_SIZE; ++i) {
+        buffer[EXTERNAL_EEPROM_ADDRESS_SIZE - 1 - i] = p & 0xFF;
+        p >>= 8;
+    }
+}
+
+void eeprom_driver_init(void) {}
+
+void eeprom_driver_erase(void) {
+    uint8_t buf[EXTERNAL_EEPROM_PAGE_SIZE];
+    memset(buf, 0x00, EXTERNAL_EEPROM_PAGE_SIZE);
+    for (intptr_t addr = 0; addr < EXTERNAL_EEPROM_BYTE_COUNT; addr += EXTERNAL_EEPROM_PAGE_SIZE) {
+        eeprom_write_block(buf, (void *)addr, EXTERNAL_EEPROM_PAGE_SIZE);
+    }
+}
+
+void eeprom_read_block(void *buf, const void *addr, size_t len) {
+    uint8_t complete_packet[EXTERNAL_EEPROM_ADDRESS_SIZE];
+    fill_target_address(complete_packet, addr);
+
+    init_i2c_if_required();
+    i2c_transmit(EXTERNAL_EEPROM_I2C_ADDRESS((intptr_t)addr), complete_packet, EXTERNAL_EEPROM_ADDRESS_SIZE, 100);
+    i2c_receive(EXTERNAL_EEPROM_I2C_ADDRESS((intptr_t)addr), buf, len, 100);
+
+#ifdef DEBUG_EEPROM_OUTPUT
+    dprintf("[EEPROM R] 0x%04X: ", ((int)addr));
+    for (size_t i = 0; i < len; ++i) {
+        dprintf(" %02X", (int)(((uint8_t *)buf)[i]));
+    }
+    dprintf("\n");
+#endif  // DEBUG_EEPROM_OUTPUT
+}
+
+void eeprom_write_block(const void *buf, void *addr, size_t len) {
+    uint8_t  complete_packet[EXTERNAL_EEPROM_ADDRESS_SIZE + EXTERNAL_EEPROM_PAGE_SIZE];
+    uint8_t *read_buf    = (uint8_t *)buf;
+    intptr_t target_addr = (intptr_t)addr;
+
+    init_i2c_if_required();
+    while (len > 0) {
+        intptr_t page_offset  = target_addr % EXTERNAL_EEPROM_PAGE_SIZE;
+        int      write_length = EXTERNAL_EEPROM_PAGE_SIZE - page_offset;
+        if (write_length > len) {
+            write_length = len;
+        }
+
+        fill_target_address(complete_packet, (const void *)target_addr);
+        for (uint8_t i = 0; i < write_length; i++) {
+            complete_packet[EXTERNAL_EEPROM_ADDRESS_SIZE + i] = read_buf[i];
+        }
+
+#ifdef DEBUG_EEPROM_OUTPUT
+        dprintf("[EEPROM W] 0x%04X: ", ((int)target_addr));
+        for (uint8_t i = 0; i < write_length; i++) {
+            dprintf(" %02X", (int)(read_buf[i]));
+        }
+        dprintf("\n");
+#endif  // DEBUG_EEPROM_OUTPUT
+
+        i2c_transmit(EXTERNAL_EEPROM_I2C_ADDRESS((intptr_t)addr), complete_packet, EXTERNAL_EEPROM_ADDRESS_SIZE + write_length, 100);
+        wait_ms(EXTERNAL_EEPROM_WRITE_TIME);
+
+        read_buf += write_length;
+        target_addr += write_length;
+        len -= write_length;
+    }
+}

drivers/eeprom/eeprom_i2c.h

@@ -0,0 +1,115 @@
+/* Copyright 2019 Nick Brassel (tzarc)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/*
+    Default device configurations:
+
+    For the Sparkfun Qwiic I2C EEPROM module: https://www.sparkfun.com/products/14764
+        #define EEPROM_I2C_CAT24C512 // (part number 24512A)
+        #define EEPROM_I2C_RM24C512C // (part number 24512C)
+
+    For the Sparkfun I2C EEPROM chip: https://www.sparkfun.com/products/525
+        #define EEPROM_I2C_24LC256
+
+    For the Adafruit I2C FRAM chip: https://www.adafruit.com/product/1895
+        #define EEPROM_I2C_MB85RC256V
+*/
+#if defined(EEPROM_I2C_CAT24C512)
+#    define EXTERNAL_EEPROM_BYTE_COUNT 65536
+#    define EXTERNAL_EEPROM_PAGE_SIZE 128
+#    define EXTERNAL_EEPROM_ADDRESS_SIZE 2
+#    define EXTERNAL_EEPROM_WRITE_TIME 5
+#elif defined(EEPROM_I2C_RM24C512C)
+#    define EXTERNAL_EEPROM_BYTE_COUNT 65536
+#    define EXTERNAL_EEPROM_PAGE_SIZE 128
+#    define EXTERNAL_EEPROM_ADDRESS_SIZE 2
+#    define EXTERNAL_EEPROM_WRITE_TIME 3
+#elif defined(EEPROM_I2C_24LC256)
+#    define EXTERNAL_EEPROM_BYTE_COUNT 32768
+#    define EXTERNAL_EEPROM_PAGE_SIZE 64
+#    define EXTERNAL_EEPROM_ADDRESS_SIZE 2
+#    define EXTERNAL_EEPROM_WRITE_TIME 5
+#elif defined(EEPROM_I2C_24LC128)
+#    define EXTERNAL_EEPROM_BYTE_COUNT 16384
+#    define EXTERNAL_EEPROM_PAGE_SIZE 64
+#    define EXTERNAL_EEPROM_ADDRESS_SIZE 2
+#    define EXTERNAL_EEPROM_WRITE_TIME 5
+#elif defined(EEPROM_I2C_MB85RC256V)
+#    define EXTERNAL_EEPROM_BYTE_COUNT 32768
+#    define EXTERNAL_EEPROM_PAGE_SIZE 128
+#    define EXTERNAL_EEPROM_ADDRESS_SIZE 2
+#    define EXTERNAL_EEPROM_WRITE_TIME 0
+#endif
+
+/*
+    The base I2C address of the EEPROM.
+    This needs to be shifted up by 1, to match i2c_master requirements.
+*/
+#ifndef EXTERNAL_EEPROM_I2C_BASE_ADDRESS
+#    define EXTERNAL_EEPROM_I2C_BASE_ADDRESS 0b10100000
+#endif
+
+/*
+    The calculated I2C address based on the input memory location.
+
+    For EEPROM chips that embed part of the memory location in the I2C address
+    such as AT24M02 you can use something similar to the following (ensuring the
+    result is shifted by left by 1):
+
+    #define EXTERNAL_EEPROM_I2C_ADDRESS(loc) \
+        (EXTERNAL_EEPROM_I2C_BASE_ADDRESS | ((((loc) >> 16) & 0x07) << 1))
+
+*/
+#ifndef EXTERNAL_EEPROM_I2C_ADDRESS
+#    define EXTERNAL_EEPROM_I2C_ADDRESS(loc) (EXTERNAL_EEPROM_I2C_BASE_ADDRESS)
+#endif
+
+/*
+    The total size of the EEPROM, in bytes. The EEPROM datasheet will usually
+    specify this value in kbits, and will require conversion to bytes.
+*/
+#ifndef EXTERNAL_EEPROM_BYTE_COUNT
+#    define EXTERNAL_EEPROM_BYTE_COUNT 8192
+#endif
+
+/*
+    The page size in bytes of the EEPROM, as specified in the datasheet.
+*/
+#ifndef EXTERNAL_EEPROM_PAGE_SIZE
+#    define EXTERNAL_EEPROM_PAGE_SIZE 32
+#endif
+
+/*
+    The address size in bytes of the EEPROM. For EEPROMs with <=256 bytes, this
+    will likely be 1. For EEPROMs >256 and <=65536, this will be 2. For EEPROMs
+    >65536, this will likely need to be 2 with the modified variant of
+    EXTERNAL_EEPROM_I2C_ADDRESS above.
+
+    As expected, consult the datasheet for specifics of your EEPROM.
+*/
+#ifndef EXTERNAL_EEPROM_ADDRESS_SIZE
+#    define EXTERNAL_EEPROM_ADDRESS_SIZE 2
+#endif
+
+/*
+    The write cycle time of the EEPROM in milliseconds, as specified in the
+    datasheet.
+*/
+#ifndef EXTERNAL_EEPROM_WRITE_TIME
+#    define EXTERNAL_EEPROM_WRITE_TIME 5
+#endif

drivers/eeprom/eeprom_transient.c

@@ -0,0 +1,52 @@
+/* Copyright 2019 Nick Brassel (tzarc)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdint.h>
+#include <string.h>
+
+#include "eeprom_driver.h"
+#include "eeprom_transient.h"
+
+__attribute__((aligned(4))) static uint8_t transientBuffer[TRANSIENT_EEPROM_SIZE] = {0};
+
+size_t clamp_length(intptr_t offset, size_t len) {
+    if (offset + len > TRANSIENT_EEPROM_SIZE) {
+        len = TRANSIENT_EEPROM_SIZE - offset;
+    }
+
+    return len;
+}
+
+void eeprom_driver_init(void) { eeprom_driver_erase(); }
+
+void eeprom_driver_erase(void) { memset(transientBuffer, 0x00, TRANSIENT_EEPROM_SIZE); }
+
+void eeprom_read_block(void *buf, const void *addr, size_t len) {
+    intptr_t offset = (intptr_t)addr;
+    memset(buf, 0x00, len);
+    len = clamp_length(offset, len);
+    if (len > 0) {
+        memcpy(buf, &transientBuffer[offset], len);
+    }
+}
+
+void eeprom_write_block(const void *buf, void *addr, size_t len) {
+    intptr_t offset = (intptr_t)addr;
+    len             = clamp_length(offset, len);
+    if (len > 0) {
+        memcpy(&transientBuffer[offset], buf, len);
+    }
+}

drivers/eeprom/eeprom_transient.h

@@ -0,0 +1,25 @@
+/* Copyright 2019 Nick Brassel (tzarc)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/*
+    The size of the transient EEPROM buffer size.
+*/
+#ifndef TRANSIENT_EEPROM_SIZE
+#    include "eeconfig.h"
+#    define TRANSIENT_EEPROM_SIZE (((EECONFIG_SIZE + 3) / 4) * 4)  // based off eeconfig's current usage, aligned to 4-byte sizes, to deal with LTO
+#endif

drivers/issi/is31fl3733.c

@@ -217,7 +217,7 @@ void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
 
         // If any of the transactions fail we risk writing dirty PG0,
         // refresh page 0 just in case.
-        if (!IS31FL3733_write_pwm_buffer(addr, g_pwm_buffer[index])){
+        if (!IS31FL3733_write_pwm_buffer(addr, g_pwm_buffer[index])) {
             g_led_control_registers_update_required[index] = true;
         }
     }

drivers/oled/oled_driver.c

@@ -392,6 +392,8 @@ void oled_write_char(const char data, bool invert) {
     static uint8_t oled_temp_buffer[OLED_FONT_WIDTH];
     memcpy(&oled_temp_buffer, oled_cursor, OLED_FONT_WIDTH);
 
+    _Static_assert(sizeof(font) >= ((OLED_FONT_END + 1 - OLED_FONT_START) * OLED_FONT_WIDTH), "OLED_FONT_END references outside array");
+
     // set the reder buffer data
     uint8_t cast_data = (uint8_t)data;  // font based on unsigned type for index
     if (cast_data < OLED_FONT_START || cast_data > OLED_FONT_END) {
@@ -585,4 +587,4 @@ void oled_task(void) {
 #endif
 }
 
-__attribute__((weak)) void oled_task_user(void) {}
+__attribute__((weak)) void oled_task_user(void) {}

drivers/oled/oled_driver.h

@@ -131,7 +131,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif
 // unsigned char value of the last character in the font file
 #if !defined(OLED_FONT_END)
-#    define OLED_FONT_END 224
+#    define OLED_FONT_END 223
 #endif
 // Font render width
 #if !defined(OLED_FONT_WIDTH)
@@ -260,4 +260,4 @@ bool oled_scroll_off(void);
 uint8_t oled_max_chars(void);
 
 // Returns the maximum number of lines that will fit on the oled
-uint8_t oled_max_lines(void);
+uint8_t oled_max_lines(void);

keyboards/1upkeyboards/1up60hse/config.h

@@ -20,8 +20,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x0000
+#define VENDOR_ID       0x6F75 // OU
+#define PRODUCT_ID      0x6873
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    1upkeyboards
 #define PRODUCT         1up60hse

keyboards/1upkeyboards/1up60hse/keymaps/via/keymap.c

@@ -0,0 +1,91 @@
+/* Copyright 2018 MechMerlin
+ * Copyright 2018 Logan Huskins
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Qwerty
+   * ,-----------------------------------------------------------------------------------------.
+   * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  | Backspace |
+   * |-----------------------------------------------------------------------------------------+
+   * |  Tab   |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |    \   |
+   * |-----------------------------------------------------------------------------------------+
+   * |  Caps   |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+   * |-----------------------------------------------------------------------------------------+
+   * |   Shift   |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |      Shift      |
+   * |-----------------------------------------------------------------------------------------+
+   * | Ctrl  |  GUI  |  Alt  |              Space              |  Alt  |  GUI  |  L1   | Ctrl  |
+   * `-----------------------------------------------------------------------------------------'
+   */
+  [0] = LAYOUT_60_ansi(
+    KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
+    KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+    KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+    KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
+    KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL
+  ),
+
+  /* Function
+   * ,-----------------------------------------------------------------------------------------.
+   * |  `  | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 |    Del    |
+   * |-----------------------------------------------------------------------------------------+
+   * |        |     | Up  |     |     |     |     |     |     |     |PrtSc|ScrLk|Pause|        |
+   * |-----------------------------------------------------------------------------------------+
+   * |         |Left |Down |Right|     |     |     |     |     | Ins |Home |PgUp |             |
+   * |-----------------------------------------------------------------------------------------+
+   * |           |VolUp|VolDn|VolMu|     |     |     |     |     | End |PgDn |                 |
+   * |-----------------------------------------------------------------------------------------+
+   * |       |       |       |                                 |       |  L2   |       |       |
+   * `-----------------------------------------------------------------------------------------'
+   */
+  [1] = LAYOUT_60_ansi(
+    KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
+    KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
+    KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
+    KC_TRNS, KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2), KC_TRNS, KC_TRNS
+  ),
+
+  /* RGB
+   * ,-----------------------------------------------------------------------------------------.
+   * |     |     |     |     |     |     |     |     |     |     |     |     |     |   Reset   |
+   * |-----------------------------------------------------------------------------------------+
+   * | BL Tog |BLInc|BLDec|BLStp|     |     |     |     |     |     |     |     |     |        |
+   * |-----------------------------------------------------------------------------------------+
+   * | RGB Tog |Mode |Hue I|Sat I|Val I|Spd I|Plain|Breat|Rnbow|Swirl|     |     |             |
+   * |-----------------------------------------------------------------------------------------+
+   * |           |RMode|Hue D|Sat D|Val D|Spd D|Snake|Knigh|Xmas |Gradi|     |                 |
+   * |-----------------------------------------------------------------------------------------+
+   * |       |       |       |                                 |       |       |       |       |
+   * `-----------------------------------------------------------------------------------------'
+   */
+  [2] = LAYOUT_60_ansi(
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,
+    BL_TOGG, BL_INC, BL_DEC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+  ),
+
+  [3] = LAYOUT_60_ansi(
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+  ),
+
+};

keyboards/1upkeyboards/1up60hse/keymaps/via/readme.md

@@ -0,0 +1 @@
+# 1up60hse via keymap

keyboards/1upkeyboards/1up60hse/keymaps/via/rules.mk

@@ -0,0 +1,3 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes
+MOUSEKEY_ENABLE = no

keyboards/1upkeyboards/1up60hse/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,12 +25,12 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 EXTRAFLAGS += -flto
 
 LAYOUTS = 60_ansi

keyboards/1upkeyboards/1up60hte/config.h

@@ -21,8 +21,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
+#define VENDOR_ID       0x6F75 // OU
+#define PRODUCT_ID      0x6874 // HT
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    1upkeyboards
 #define PRODUCT         1up60hte

keyboards/1upkeyboards/1up60hte/keymaps/via/keymap.c

@@ -0,0 +1,47 @@
+/*
+Copyright 2020 MechMerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[0] = LAYOUT_tsangan(
+		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,     KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,
+		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,     KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
+		KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,     KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+		KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM,  KC_DOT,  KC_SLSH, KC_RSFT, MO(1),
+		KC_LCTL, KC_LALT, KC_LGUI, KC_SPC,  KC_RGUI, KC_RALT, KC_RCTL),
+
+	[1] = LAYOUT_tsangan(
+		RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,    KC_F10,  KC_F11,  KC_F12,  KC_INS, KC_DEL,
+		KC_CAPS, BL_TOGG, BL_DEC,  BL_INC,  BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SLCK,  KC_PAUS, KC_UP,   KC_TRNS, KC_CLR,
+		KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_MPLY, KC_MPRV, KC_MNXT, RGB_VAD, KC_HOME, KC_PGUP,  KC_LEFT, KC_RGHT, KC_TRNS,
+		KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, KC_END, KC_PGDN,   KC_DOWN, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	[2] = LAYOUT_tsangan(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	[3] = LAYOUT_tsangan(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+};

keyboards/1upkeyboards/1up60hte/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+MOUSEKEY_ENABLE = no

keyboards/1upkeyboards/1up60hte/rules.mk

@@ -14,15 +14,16 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE = lite	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = no	# Console for debug(+400)
+BOOTMAGIC_ENABLE = lite	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = no	# Console for debug
 COMMAND_ENABLE = no    # Commands for debug and configuration
 SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
 AUDIO_ENABLE = no
 RGBLIGHT_ENABLE = yes
+LTO_ENABLE = yes
 
 LAYOUTS = 60_hhkb

keyboards/1upkeyboards/1up60rgb/config.h

@@ -3,8 +3,8 @@
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
+#define VENDOR_ID       0x6F75 // OU
+#define PRODUCT_ID      0x7267 // RG
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    1upkeyboards
 #define PRODUCT         1UP RGB Underglow PCB

keyboards/1upkeyboards/1up60rgb/keymaps/via/keymap.c

@@ -0,0 +1,34 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[0] = LAYOUT_all(
+		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT,
+		KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT,
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL),
+
+	[1] = LAYOUT_all(
+		RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	[2] = LAYOUT_all(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	[3] = LAYOUT_all(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
+
+};
+

keyboards/1upkeyboards/1up60rgb/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/1upkeyboards/1up60rgb/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = no	# Console for debug(+400)
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = no	# Console for debug
 COMMAND_ENABLE = no    # Commands for debug and configuration
 SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work

keyboards/1upkeyboards/super16/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = caterina
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,11 +25,11 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 
 LAYOUTS = ortho_4x4 numpad_4x4

keyboards/2_milk/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = caterina
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE  = no	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE  = no	# Mouse keys(+4700)
-EXTRAKEY_ENABLE  = no	# Audio control and System control(+450)
-CONSOLE_ENABLE  = yes	# Console for debug(+400)
+BOOTMAGIC_ENABLE  = no	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE  = no	# Mouse keys
+EXTRAKEY_ENABLE  = no	# Audio control and System control
+CONSOLE_ENABLE  = yes	# Console for debug
 COMMAND_ENABLE  = yes    # Commands for debug and configuration
 SLEEP_LED_ENABLE  = no  # Breathing sleep LED during USB suspend
 NKRO_ENABLE  = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work

keyboards/2key2crawl/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE = lite	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
-EXTRAKEY_ENABLE = no	# Audio control and System control(+450)
-CONSOLE_ENABLE = yes	# Console for debug(+400)
+BOOTMAGIC_ENABLE = lite	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no	# Mouse keys
+EXTRAKEY_ENABLE = no	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
 COMMAND_ENABLE = no    # Commands for debug and configuration
 SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work

keyboards/30wer/rules.mk

@@ -15,10 +15,10 @@ BOOTLOADER = caterina
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
 NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality

keyboards/40percentclub/25/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = caterina
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,12 +25,12 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		    # Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		    # Enable support for HD44780 based LCDs
 
 # Enable generic behavior for split boards
 SPLIT_KEYBOARD = yes

keyboards/40percentclub/4x4/rules.mk

@@ -14,21 +14,21 @@ BOOTLOADER = caterina
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 				# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 				# Enable support for HD44780 based LCDs
 
 LAYOUTS = ortho_4x4  ortho_4x8  ortho_4x12  ortho_4x16

keyboards/40percentclub/5x5/rules.mk

@@ -14,21 +14,21 @@ BOOTLOADER = caterina
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 				# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 				# Enable support for HD44780 based LCDs
 
 LAYOUTS = ortho_5x5  ortho_5x10  ortho_5x15

keyboards/40percentclub/6lit/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = caterina
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,12 +25,12 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		    # Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		    # Enable support for HD44780 based LCDs
 
 # Enable generic behavior for split boards
 SPLIT_KEYBOARD = yes

keyboards/40percentclub/foobar/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = caterina
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,12 +25,12 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		    # Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		    # Enable support for HD44780 based LCDs
 
 # Enable generic behavior for split boards
 SPLIT_KEYBOARD = yes

keyboards/40percentclub/gherkin/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = caterina
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	  # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	  # Audio control and System control(+450)
-CONSOLE_ENABLE = no	    # Console for debug(+400)
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes	  # Mouse keys
+EXTRAKEY_ENABLE = yes	  # Audio control and System control
+CONSOLE_ENABLE = no	    # Console for debug
 COMMAND_ENABLE = no     # Commands for debug and configuration
 SLEEP_LED_ENABLE = no   # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes		    # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work

keyboards/40percentclub/half_n_half/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = caterina
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,12 +25,12 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
 
 # Enable generic behavior for split boards
 SPLIT_KEYBOARD = yes

keyboards/40percentclub/i75/rules.mk

@@ -1,10 +1,10 @@
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -12,12 +12,12 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		    # Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 		    # Enable support for HD44780 based LCDs
 
 LAYOUTS = ortho_5x15
 DEFAULT_FOLDER = 40percentclub/i75/promicro

keyboards/40percentclub/luddite/config.h

@@ -19,6 +19,8 @@
 #define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6 }
 #define UNUSED_PINS
 
+#define DIODE_DIRECTION COL2ROW
+
 /* number of backlight levels */
 #define BACKLIGHT_PIN B5
 #ifdef BACKLIGHT_PIN

keyboards/40percentclub/luddite/keymaps/tzarc/config.h

@@ -1,6 +0,0 @@
-#undef RGBLED_NUM
-#define RGBLED_NUM 16
-
-#define QMK_ESC_OUTPUT F4
-#define QMK_ESC_INPUT D3
-#define QMK_LED B0

keyboards/40percentclub/luddite/keymaps/tzarc/keymap.c

@@ -1,30 +0,0 @@
-#include QMK_KEYBOARD_H
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _BASE 0
-#define _FN1 1
-
-enum custom_keycodes {
-  QWERTY = SAFE_RANGE,
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_BASE] = LAYOUT_60_ansi(
-    KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSPC,
-    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,  KC_BSLS,
-    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,           KC_ENT,
-    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,                    KC_RSFT,
-    KC_LCTL, KC_LGUI, KC_LALT ,                           KC_SPC,                             KC_RALT, KC_APP,  MO(_FN1), KC_RCTL
-  ),
-
-  [_FN1] = LAYOUT_60_ansi(
-    KC_GESC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,   _______,
-    RGB_TOG, RGB_MOD, KC_UP,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______,
-    _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-    BL_INC,  BL_DEC,  BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-    KC_GRV,  _______, _______,                            _______,                            _______, KC_RGUI, _______,  _______
-  )
-};

keyboards/40percentclub/luddite/keymaps/tzarc/rules.mk

@@ -1 +0,0 @@
-BOOTLOADER = qmk-dfu

keyboards/40percentclub/luddite/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = caterina
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	  # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	  # Audio control and System control(+450)
-CONSOLE_ENABLE = no			# Console for debug(+400)
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes	  # Mouse keys
+EXTRAKEY_ENABLE = yes	  # Audio control and System control
+CONSOLE_ENABLE = no			# Console for debug
 COMMAND_ENABLE = no     # Commands for debug and configuration
 SLEEP_LED_ENABLE = no   # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes				# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work