Update newbs installation procedure for MSYS2 (#8423)

* revised hardware availability - URL

* fixed encoder rotate direction (reversed)

.vscode/settings.json

@@ -11,6 +11,7 @@
     "files.associations": {
       "*.h": "c",
       "*.c": "c",
+      "*.inc": "c",
       "*.cpp": "cpp",
       "*.hpp": "cpp",
       "xstddef": "c",

build_keyboard.mk

@@ -231,13 +231,16 @@ endif
 # We can assume a ChibiOS target When MCU_FAMILY is defined since it's
 # not used for LUFA
 ifdef MCU_FAMILY
-    FIRMWARE_FORMAT?=bin
     PLATFORM=CHIBIOS
+    PLATFORM_KEY=chibios
+    FIRMWARE_FORMAT?=bin
 else ifdef ARM_ATSAM
     PLATFORM=ARM_ATSAM
+    PLATFORM_KEY=arm_atsam
     FIRMWARE_FORMAT=bin
 else
     PLATFORM=AVR
+    PLATFORM_KEY=avr
     FIRMWARE_FORMAT?=hex
 endif
 

build_test.mk

@@ -41,6 +41,7 @@ all: elf
 
 VPATH += $(COMMON_VPATH)
 PLATFORM:=TEST
+PLATFORM_KEY:=test
 
 ifneq ($(filter $(FULL_TESTS),$(TEST)),)
 include tests/$(TEST)/rules.mk

common_features.mk

@@ -35,11 +35,7 @@ ifeq ($(strip $(AUDIO_ENABLE)), yes)
     MUSIC_ENABLE := 1
     SRC += $(QUANTUM_DIR)/process_keycode/process_audio.c
     SRC += $(QUANTUM_DIR)/process_keycode/process_clicky.c
-    ifeq ($(PLATFORM),AVR)
-        SRC += $(QUANTUM_DIR)/audio/audio.c
-    else
-        SRC += $(QUANTUM_DIR)/audio/audio_arm.c
-    endif
+    SRC += $(QUANTUM_DIR)/audio/audio_$(PLATFORM_KEY).c
     SRC += $(QUANTUM_DIR)/audio/voices.c
     SRC += $(QUANTUM_DIR)/audio/luts.c
 endif
@@ -315,11 +311,7 @@ ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
     else
         SRC += $(QUANTUM_DIR)/backlight/backlight_driver_common.c
         ifeq ($(strip $(BACKLIGHT_DRIVER)), pwm)
-            ifeq ($(PLATFORM),AVR)
-                SRC += $(QUANTUM_DIR)/backlight/backlight_avr.c
-            else
-                SRC += $(QUANTUM_DIR)/backlight/backlight_arm.c
-            endif
+            SRC += $(QUANTUM_DIR)/backlight/backlight_$(PLATFORM_KEY).c
         else
             SRC += $(QUANTUM_DIR)/backlight/backlight_$(strip $(BACKLIGHT_DRIVER)).c
         endif

docs/ja/_summary.md

@@ -78,7 +78,7 @@
    * [キーロック](ja/feature_key_lock.md)
    * [レイアウト](ja/feature_layouts.md)
    * [リーダー キー](ja/feature_leader_key.md)
-   * [LED マトリクス](ja/feature_led_matrix.md)
+   * [LED マトリックス](ja/feature_led_matrix.md)
    * [マクロ](ja/feature_macros.md)
    * [マウスキー](ja/feature_mouse_keys.md)
    * [OLED ドライバ](ja/feature_oled_driver.md)
@@ -86,7 +86,7 @@
    * [ポインティング デバイス](ja/feature_pointing_device.md)
    * [PS/2 マウス](ja/feature_ps2_mouse.md)
    * [RGB ライト](ja/feature_rgblight.md)
-   * [RGB マトリクス](ja/feature_rgb_matrix.md)
+   * [RGB マトリックス](ja/feature_rgb_matrix.md)
    * [Space Cadet](ja/feature_space_cadet.md)
    * [分割キーボード](ja/feature_split_keyboard.md)
    * [Stenography](ja/feature_stenography.md)

docs/ja/custom_matrix.md

@@ -0,0 +1,114 @@
+# カスタムマトリックス
+
+<!---
+  grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
+  original document: 0.8.46:docs/custom_matrix.md
+  git diff 0.8.46 HEAD -- docs/custom_matrix.md | cat
+-->
+
+QMKは、デフォルトのマトリックススキャンルーチンを独自のコードで部分的に入れ替えたり全部入れ替えたりしたりするメカニズムを提供します。
+
+この機能を使用する理由は次のとおりです:
+
+* キーボードのスイッチと MCU ピンの間に追加のハードウェアがある場合
+  * I/O マルチプレクサ
+  * ラインデコーダー
+* 一般的ではないキースイッチマトリックス
+  * `COL2ROW` と `ROW2COL` の同時使用
+
+## 前提条件
+
+カスタムマトリックスの実装には、通常、追加のソースファイルのコンパイルが含まれます。
+一貫性を保つために、このソースファイルのファイル名は `matrix.c` とすることをお勧めします。
+
+あなたのキーボードディレクトリに新しいファイルを追加します:
+```text
+keyboards/<keyboard>/matrix.c
+```
+
+そして、新しいファイルのコンパイルを指定するため、以下を `rules.mk` に追加します
+```make
+SRC += matrix.c
+```
+
+## マトリックスコードの部分置き換え
+
+カスタムマトリックスを実装する際、定型コードを書かなくてすむように、さまざまなスキャン関数のデフォルト実装を提供しています。
+
+設定するには、以下を `rules.mk` に追加します：
+```make
+CUSTOM_MATRIX = lite
+```
+
+そして、キーボードディレクトリの `matrix.c` ファイルに次の関数を実装します。
+
+```c
+void matrix_init_custom(void) {
+    // TODO: ここでハードウェアの初期化をする
+}
+
+bool matrix_scan_custom(matrix_row_t current_matrix[]) {
+    bool matrix_has_changed = false;
+
+    // TODO: ここで、マトリックススキャンを行なう
+
+    return matrix_has_changed;
+}
+```
+
+## マトリックスコードの全面置き換え
+
+スキャンルーチンをさらに変更する必要がある場合は、完全なスキャンルーチンを実装することを選択できます。
+
+設定するには、以下を `rules.mk` に追加します：
+```make
+CUSTOM_MATRIX = yes
+```
+
+そして、キーボードディレクトリの `matrix.c` ファイルに次の関数を実装します。
+
+```c
+matrix_row_t matrix_get_row(uint8_t row) {
+    // TODO: 要求された行データを返します
+}
+
+void matrix_print(void) {
+    // TODO: printf() を使って現在のマトリックスの状態をコンソールにダンプします
+}
+
+void matrix_init(void) {
+    // TODO: ここでハードウェアとグローバルマトリックスの状態を初期化します
+
+    // ハードウェアによるデバウンスがない場合 - 設定されているデバウンスルーチンを初期化します
+    debounce_init(MATRIX_ROWS);
+
+    // 正しいキーボード動作のためにこれを呼び出す*必要があります*
+    matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void) {
+    bool matrix_has_changed = false;
+
+    // TODO: ここにマトリックススキャンルーチンを追加します
+
+    // ハードウェアによるデバウンスがない場合 - 設定されているデバウンスルーチンを使用します
+    debounce(raw_matrix, matrix, MATRIX_ROWS, changed);
+
+    // 正しいキーボード動作のためにこれを呼び出す*必要があります*
+    matrix_scan_quantum();
+
+    return matrix_has_changed;
+}
+```
+
+また、次のコールバックのデフォルトも提供します。
+
+```c
+__attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); }
+
+__attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); }
+
+__attribute__((weak)) void matrix_init_user(void) {}
+
+__attribute__((weak)) void matrix_scan_user(void) {}
+```

docs/newbs_getting_started.md

@@ -42,9 +42,13 @@ We've tried to make QMK as easy to set up as possible. You only have to prepare
 You will need to install MSYS2, Git, and the QMK CLI.
 
 * Follow the installation instructions on the [MSYS2 homepage](http://www.msys2.org).
-* Close any open MSYS2 terminals and open a new MSYS2 MinGW 64-bit terminal.
+* Close any open MSYS2 terminals and open a new MSYS2 MinGW 64-bit terminal. NOTE: This is **not** the same as the MSYS terminal that opens when installation is completed.
 
-After opening a new MSYS2 MinGW 64-bit terminal run these commands:
+After opening a new MSYS2 MinGW 64-bit terminal, make sure `pacman` is up to date with:
+
+    pacman -Syu
+
+You may be asked to close and reopen the window. Do this and keep running the above command until it says `there is nothing to do`. Then run the following:
 
     pacman -S git python3-pip
     python3 -m pip install qmk

keyboards/choco60/keymaps/default/keymap.c

@@ -25,17 +25,17 @@ enum layer_names {
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_BASE] = LAYOUT(
-    KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS, KC_EQUAL, KC_BSLASH, KC_GRAVE,
-    KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRACKET, KC_RBRACKET, KC_BSPACE,
-    KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCOLON, KC_QUOTE, KC_ENTER,
-    KC_LSHIFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLASH, KC_RSHIFT, KC_FN,
-    KC_LALT,  KC_LGUI, KC_SPACE, KC_SPACE, KC_SPACE, KC_RGUI, KC_RALT
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,     KC_7,    KC_8,    KC_9,   KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,     KC_U,    KC_I,    KC_O,   KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
+    KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,     KC_J,    KC_K,    KC_L,   KC_SCLN, KC_QUOT, KC_ENT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,     KC_M,    KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_FN,
+    KC_LALT, KC_LGUI, KC_SPC,  KC_SPC,  KC_SPC,  KC_RGUI, KC_RALT
   ),
   [_FN] = LAYOUT(
-    _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INSERT, KC_DELETE,
-    _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCREEN, KC_SCROLLLOCK, KC_PAUSE, KC_UP, KC_RBRACKET, KC_BSPACE,
-    _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_LEFT, KC_RIGHT, KC_ENTER,
-    RESET, _______, _______, _______, _______, _______, _______, _______, KC_END, KC_PGDOWN, KC_DOWN, KC_RSHIFT, KC_FN,
-    _______, _______, _______, _______, _______, KC_STOP, _______
+    _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS,  KC_DEL,
+    KC_CAPS, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,   _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_END,  KC_PGDN, KC_DOWN, _______, _______,
+    _______, _______, _______, _______, _______, KC_STOP, RESET
   )
 };

keyboards/ergodash/rev1/keymaps/tw1t611/config.h

@@ -0,0 +1,33 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS

keyboards/ergodash/rev1/keymaps/tw1t611/keymap.c

@@ -0,0 +1,24 @@
+#include QMK_KEYBOARD_H
+#include "keymap_german.h"
+
+enum layers {
+  _QWERTZ,
+  _MOD,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTZ] = LAYOUT(
+    _______ ,KC_1    ,KC_2    ,KC_3    ,KC_4    ,KC_5    ,_______ ,                        KC_RSFT ,KC_6    ,KC_7    ,KC_8    ,KC_9    ,KC_0    ,_______ ,
+    KC_ESC  ,KC_Q    ,KC_W    ,KC_E    ,KC_R    ,KC_T    ,KC_BSPC ,                        KC_DEL  ,KC_Y    ,KC_U    ,KC_I    ,KC_O    ,KC_P    ,DE_ADIA   ,
+    KC_TAB  ,KC_A    ,KC_S    ,KC_D    ,KC_F    ,KC_G    ,DE_UNDS ,                        KC_LALT ,KC_H    ,KC_J    ,KC_K    ,KC_L    ,DE_EQL  ,DE_ODIA ,
+    _______ ,KC_Z    ,KC_X    ,KC_C    ,KC_V    ,KC_B    ,KC_SPC  ,                        KC_ENT  ,KC_N    ,KC_M    ,KC_COMM ,KC_DOT  ,DE_SS   ,DE_UDIA ,
+    _______ ,_______ ,_______ ,_______ ,         KC_LCTL ,KC_SPC  ,KC_LSFT ,      MO(_MOD),KC_ENT  ,KC_LGUI ,         _______ ,_______ ,_______ ,_______
+  ),
+  [_MOD] = LAYOUT(
+    KC_F11  ,KC_F1   ,KC_F2   ,KC_F3   ,KC_F4   ,KC_F5   ,RGB_MOD ,                        RESET   ,KC_F6   ,KC_F7   ,KC_F8   ,KC_F9   ,KC_F10  ,KC_F12  ,
+    DE_CIRC ,DE_QUOT ,DE_DQUO ,DE_LCBR ,DE_RCBR ,DE_GRV  ,RGB_TOG ,                        _______ ,DE_PERC ,DE_PLUS ,DE_MINS ,DE_ASTR ,DE_SLSH ,DE_BSLS ,
+    DE_TILD ,DE_EXLM ,DE_DLR  ,DE_LPRN ,DE_RPRN ,DE_AMPR ,RGB_M_P ,                        _______ ,KC_LEFT ,KC_DOWN ,KC_UP   ,KC_RGHT ,DE_QUES ,DE_PIPE ,
+    _______ ,DE_AT   ,DE_EURO ,DE_LBRC ,DE_RBRC ,_______ ,_______ ,                        _______ ,DE_HASH ,DE_LABK ,DE_SCLN ,DE_COLN ,DE_RABK ,DE_SECT ,
+    _______ ,_______ ,_______ ,_______ ,         _______ ,_______ ,_______ ,      _______ ,_______ ,_______ ,         _______ ,_______ ,_______ ,_______ 
+  ),
+};

keyboards/ergodash/rev1/keymaps/tw1t611/readme.md

@@ -0,0 +1,4 @@
+# Tw1t611 Ergodash Layout
+
+This is a german layout for the ergodash keyboard. The Umlauts are placed on the right side.
+It uses two layers and has vim like aligned arrow keys.

keyboards/ergodash/rev1/keymaps/tw1t611/rules.mk

@@ -0,0 +1,3 @@
+BACKLIGHT_ENABLE = no
+RGBLIGHT_ENABLE = no
+AUDIO_ENABLE = no

keyboards/ergodox_stm32/rules.mk

@@ -1,24 +1,11 @@
-SRC += matrix.c
-QUANTUM_LIB_SRC += i2c_master.c
-
-CFLAGS += "-Wno-error=deprecated"
-
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F1xx
+# MCU name
+MCU = STM32F103
 
 MCU_LDSCRIPT = stm32f103_bootloader
-
-MCU_STARTUP = stm32f1xx
-
 BOARD = ERGODOX_STM32_BOARD
 
-MCU = cortex-m3
-
-ARMV = 7
-
-OPT_DEFS =
-
-EXTRAFLAGS=-O0 -g
+CFLAGS += "-Wno-error=deprecated"
+EXTRAFLAGS = -O0 -g
 
 BOOTMAGIC_ENABLE = no
 MOUSEKEY_ENABLE = no	# Mouse keys
@@ -31,6 +18,8 @@ CUSTOM_MATRIX = yes # Custom matrix file
 NKRO_ENABLE      = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 UNICODE_ENABLE   = yes # Unicode
 
-
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
+
+SRC += matrix.c
+QUANTUM_LIB_SRC += i2c_master.c

keyboards/flx/lodestone/config.h

@@ -0,0 +1,70 @@
+/* Copyright 2020 Shaun Mitchell (Flex)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x4658 //FX
+#define PRODUCT_ID      0x4C53 //LS
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    FLX
+#define PRODUCT         Lodestone
+#define DESCRIPTION     FLX Lodestone
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B3, B7, F0, F1, F4 }
+#define MATRIX_COL_PINS { B2, F5, F6, D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE

keyboards/flx/lodestone/info.json

@@ -0,0 +1,84 @@
+{
+    "keyboard_name": "lodestone",
+    "url": "https://prototypist.net/", 
+    "maintainer": "Flexerm",
+    "width": 16, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT_all": {
+	        "layout": [
+	            {"label":"K00 (B3,B2)", "x":0, "y":0},
+	            {"label":"K01 (B3,F5)", "x":1, "y":0},
+	            {"label":"K02 (B3,F6)", "x":2, "y":0},
+	            {"label":"K03 (B3,D0)", "x":3, "y":0},
+	            {"label":"K04 (B3,D1)", "x":4, "y":0},
+	            {"label":"K05 (B3,D2)", "x":5, "y":0},
+	            {"label":"K06 (B3,D3)", "x":6, "y":0},
+	            {"label":"K07 (B3,D5)", "x":7, "y":0},
+	            {"label":"K08 (B3,D4)", "x":8, "y":0},
+	            {"label":"K09 (B3,D6)", "x":9, "y":0},
+	            {"label":"K0A (B3,D7)", "x":10, "y":0},
+	            {"label":"K0B (B3,B4)", "x":11, "y":0},
+	            {"label":"K0C (B3,B5)", "x":12, "y":0},
+	            {"label":"K0D (B3,B6)", "x":13, "y":0},
+	            {"label":"K0E (B3,C6)", "x":14, "y":0},
+	            {"label":"K0F (B3,C7)", "x":15, "y":0},
+	            {"label":"K10 (B7,B2)", "x":0, "y":1, "w":1.5},
+	            {"label":"K11 (B7,F5)", "x":1.5, "y":1},
+	            {"label":"K12 (B7,F6)", "x":2.5, "y":1},
+	            {"label":"K13 (B7,D0)", "x":3.5, "y":1},
+	            {"label":"K14 (B7,D1)", "x":4.5, "y":1},
+	            {"label":"K15 (B7,D2)", "x":5.5, "y":1},
+	            {"label":"K16 (B7,D3)", "x":6.5, "y":1},
+	            {"label":"K17 (B7,D5)", "x":7.5, "y":1},
+	            {"label":"K18 (B7,D4)", "x":8.5, "y":1},
+	            {"label":"K19 (B7,D6)", "x":9.5, "y":1},
+	            {"label":"K1A (B7,D7)", "x":10.5, "y":1},
+	            {"label":"K1B (B7,B4)", "x":11.5, "y":1},
+	            {"label":"K1C (B7,B5)", "x":12.5, "y":1},
+	            {"label":"K1D (B7,B6)", "x":13.5, "y":1, "w":1.5},
+	            {"label":"K1F (B7,C7)", "x":15, "y":1},
+	            {"label":"K20 (F0,B2)", "x":0, "y":2, "w":1.75},
+	            {"label":"K21 (F0,F5)", "x":1.75, "y":2},
+	            {"label":"K22 (F0,F6)", "x":2.75, "y":2},
+	            {"label":"K23 (F0,D0)", "x":3.75, "y":2},
+	            {"label":"K24 (F0,D1)", "x":4.75, "y":2},
+	            {"label":"K25 (F0,D2)", "x":5.75, "y":2},
+	            {"label":"K26 (F0,D3)", "x":6.75, "y":2},
+	            {"label":"K27 (F0,D5)", "x":7.75, "y":2},
+	            {"label":"K28 (F0,D4)", "x":8.75, "y":2},
+	            {"label":"K29 (F0,D6)", "x":9.75, "y":2},
+	            {"label":"K2A (F0,D7)", "x":10.75, "y":2},
+	            {"label":"K2B (F0,B4)", "x":11.75, "y":2},
+	            {"label":"K2C (F0,B5)", "x":12.75, "y":2},
+	            {"label":"K2D (F0,B6)", "x":13.75, "y":2, "w":1.25},
+	            {"label":"K2F (F0,C7)", "x":15, "y":2},
+	            {"label":"K30 (F1,B2)", "x":0, "y":3, "w":1.25},
+	            {"label":"K31 (F1,F5)", "x":1.25, "y":3},
+	            {"label":"K32 (F1,F6)", "x":2.25, "y":3},
+	            {"label":"K33 (F1,D0)", "x":3.25, "y":3},
+	            {"label":"K34 (F1,D1)", "x":4.25, "y":3},
+	            {"label":"K35 (F1,D2)", "x":5.25, "y":3},
+	            {"label":"K36 (F1,D3)", "x":6.25, "y":3},
+	            {"label":"K37 (F1,D5)", "x":7.25, "y":3},
+	            {"label":"K38 (F1,D4)", "x":8.25, "y":3},
+	            {"label":"K39 (F1,D6)", "x":9.25, "y":3},
+	            {"label":"K3A (F1,D7)", "x":10.25, "y":3},
+	            {"label":"K3B (F1,B4)", "x":11.25, "y":3},
+	            {"label":"K3C (F1,B5)", "x":12.25, "y":3, "w":1.75},
+	            {"label":"K3E (F1,C6)", "x":14, "y":3},
+	            {"label":"K3F (F1,C7)", "x":15, "y":3},
+	            {"label":"K40 (F4,B2)", "x":0, "y":4, "w":1.225},
+	            {"label":"K41 (F4,F5)", "x":1.25, "y":4, "w":1.25},
+	            {"label":"K42 (F4,F6)", "x":2.5, "y":4, "w":1.25},
+	            {"label":"K46 (F4,D3)", "x":3.75, "y":4, "w":6.25},
+	            {"label":"K4A (F4,D7)", "x":10, "y":4, "w":1.25},
+	            {"label":"K4B (F4,B4)", "x":11.25, "y":4, "w":1.25},
+	            {"label":"K4D (F4,B6)", "x":13, "y":4},
+	            {"label":"K4E (F4,C6)", "x":14, "y":4},
+	            {"label":"K4F (F4,C7)", "x":15, "y":4}    
+	            ]
+	        }
+	    }
+	}
+    

keyboards/flx/lodestone/keymaps/default/keymap.c

@@ -0,0 +1,20 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	// Default layer
+	[0] = LAYOUT_all(
+		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC, KC_HOME,
+		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_PGUP,
+		KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,           KC_PGDN,
+		KC_LSFT, KC_BSLS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,          KC_UP,   KC_END,
+		KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(1),            KC_LEFT, KC_DOWN, KC_RGHT),
+
+	// Fn1 Layer
+	[1] = LAYOUT_all(
+		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL,  KC_TRNS,
+		KC_CAPS, KC_TRNS, KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS,  KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,          KC_TRNS,
+		KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS, KC_TRNS,          KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_END,  KC_PGDN, KC_TRNS,          KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
+};

keyboards/flx/lodestone/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for Lodestone

keyboards/flx/lodestone/keymaps/via/keymap.c

@@ -0,0 +1,37 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	// Default layer
+	[0] = LAYOUT_all(
+		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC, KC_HOME,
+		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_PGUP,
+		KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,           KC_PGDN,
+		KC_LSFT, KC_BSLS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,          KC_UP,   KC_END,
+		KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(1),            KC_LEFT, KC_DOWN, KC_RGHT),
+
+	// Fn1 Layer
+	[1] = LAYOUT_all(
+		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL,  KC_TRNS,
+		KC_CAPS, KC_TRNS, KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS,  KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,          KC_TRNS,
+		KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS, KC_TRNS,          KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_END,  KC_PGDN, KC_TRNS,          KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
+
+	// Fn2 Layer
+	[2] = LAYOUT_all(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
+
+	// Fn3 Layer
+	[3] = LAYOUT_all(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
+};
+

keyboards/flx/lodestone/keymaps/via/readme.md

@@ -0,0 +1 @@
+# The default VIA keymap for Lodestone

keyboards/flx/lodestone/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/flx/lodestone/lodestone.c

@@ -1,4 +1,4 @@
-/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
+/* Copyright 2020 Shaun Mitchell (Flex)
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -14,11 +14,4 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#pragma once
-
-#define USE_I2C
-#define SSD1306OLED
-//#define OLED_ROTATE180
-#define SSD1306_ADDRESS 0x3C
-
-// place overrides here
+#include "lodestone.h"

keyboards/flx/lodestone/lodestone.h

@@ -0,0 +1,37 @@
+/* Copyright 2020 Shaun Mitchell (Flex)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define ___ KC_NO
+
+// standard 65% layout ANSI + ISO
+
+#define LAYOUT_all( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F,   \
+     K10,  K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,  K1D,   K1F,   \
+      K20,   K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,  K2F,   \
+    K30,  K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,   K3C,   K3E, K3F,   \
+    K40,  K41,  K42,              K46,               K4A,   K4B,     K4D, K4E, K4F    \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, ___, K1F }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, ___, K2F }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, ___, K3E, K3F }, \
+    { K40, K41, K42, ___, ___, ___, K46, ___, ___, ___, K4A, K4B, ___, K4D, K4E, K4F }, \
+}

keyboards/flx/lodestone/readme.md

@@ -0,0 +1,13 @@
+# FLX & proto[Typist] Lodestone
+
+Lodestone is a keyboard PCB supporting 65% layout with one bottom row blocker, designed by Flex of FLX Keyboards. [More info at proto[Typist]](https://prototypist.net/)
+
+* Keyboard Maintainer: [Flexerm](https://github.com/Flexerm)
+* Hardware Supported: FLX - Lodestone (LS65) PCB
+* Hardware Availability: [proto[Typist]](https://prototypist.net/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make flx/lodestone:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/flx/lodestone/rules.mk

@@ -0,0 +1,33 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI support
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
+LTO_ENABLE = yes

keyboards/foxlab/leaf60/hotswap/config.h

@@ -20,11 +20,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x0000
+#define VENDOR_ID       0x464C // "FL"
+#define PRODUCT_ID      0x0001
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    Fox Lab
-#define PRODUCT         Leaf60 Hotswap
+#define PRODUCT         Leaf 60 Hotswap
 #define DESCRIPTION     A custom hotswap 60% keyboard
 
 /* key matrix size */

keyboards/foxlab/leaf60/hotswap/keymaps/via/keymap.c

@@ -0,0 +1,48 @@
+/* Copyright 2019 Fox Lab
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	LAYOUT_60_tsangan_hhkb(
+		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL,  KC_GRV, KC_BSLS,
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, 
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, 
+		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_DEL, 
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RALT, KC_RCTL),
+
+	LAYOUT_60_tsangan_hhkb(
+		RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, 
+		KC_TRNS, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	LAYOUT_60_tsangan_hhkb(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	LAYOUT_60_tsangan_hhkb(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
+
+};

keyboards/foxlab/leaf60/hotswap/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/foxlab/leaf60/universal/config.h

@@ -20,11 +20,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x0000
+#define VENDOR_ID       0x464C // "FL"
+#define PRODUCT_ID      0x0002
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    Fox Lab
-#define PRODUCT         Leaf60 Universal
+#define PRODUCT         Leaf 60 Universal
 #define DESCRIPTION     A custom 60% keyboard
 
 /* key matrix size */

keyboards/foxlab/leaf60/universal/keymaps/via/keymap.c

@@ -0,0 +1,48 @@
+/* Copyright 2019 Fox Lab
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	LAYOUT_all(
+		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC,
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, 
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, 
+		KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_DEL, 
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_RGUI, KC_RCTL),
+
+	LAYOUT_all(
+		RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, 
+		KC_TRNS, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	LAYOUT_all(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	LAYOUT_all(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
+
+};

keyboards/foxlab/leaf60/universal/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/gh60/revc/config.h

@@ -14,14 +14,17 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program. If not, see <http://www.gnu.org/licenses/>.
 */
+
+#pragma once
+
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID    0xFEED
-#define PRODUCT_ID   0x6060
+#define VENDOR_ID    0x4335 // GEEKhack
+#define PRODUCT_ID   0x0001
 #define DEVICE_VER   0x0001
 #define MANUFACTURER    geekhack
-#define PRODUCT         GH60
+#define PRODUCT         GH60 Rev C
 #define DESCRIPTION     t.m.k. keyboard firmware for GH60
 
 /* key matrix size */

keyboards/gh60/revc/info.json

@@ -1,10 +1,7 @@
 {
-    "keyboard_name": "GH60",
-    "url": "http://qmk.fm/keyboards/gh60",
+    "keyboard_name": "GH60 Rev C",
+    "url": "",
     "maintainer": "qmk",
-    "keyboard_folder": "gh60",
-    "processor": "atmega32u4",
-    "manufacturer": "geekhack",
     "width": 15,
     "height": 5,
     "layouts": {

keyboards/gh60/revc/keymaps/via/keymap.c

@@ -0,0 +1,53 @@
+/* Copyright 2020 Diego Song
+
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+ 
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [0] = LAYOUT_all( /* 0: qwerty */
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NO,   KC_ENT,
+        KC_LSFT, TG(2),   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),
+        KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                                      KC_RALT, KC_RGUI, MO(1),  KC_RCTL
+    ),
+
+    [1] = LAYOUT_all( /* 1: fn */
+        KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_UP,   KC_TRNS, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                                     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+
+    [2] = LAYOUT_all( /* 2: arrows */
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP,   KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                                     KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    [3] = LAYOUT_all( 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                                     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+
+};

keyboards/gh60/revc/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/gh60/satan/config.h

@@ -20,11 +20,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
+#define VENDOR_ID       0x4335
+#define PRODUCT_ID      0x0002
 #define DEVICE_VER      0x0003
 #define MANUFACTURER    SATAN
-#define PRODUCT         GH60
+#define PRODUCT         GH60 Satan
 #define DESCRIPTION     60% keyboard with backlight and WS2812 support
 
 /* key matrix size */

keyboards/gh60/satan/info.json

@@ -1,5 +1,5 @@
 {
-  "keyboard_name": "Satan GH60",
+  "keyboard_name": "GH60 Satan",
   "url": "",
   "maintainer": "qmk",
   "width": 15,

keyboards/gh60/satan/keymaps/via/keymap.c

@@ -0,0 +1,53 @@
+/* Copyright 2020 Diego Song
+
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+ 
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [0] = LAYOUT_all( /* 0: qwerty */
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NO,   KC_ENT,
+        KC_LSFT, TG(2),   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),
+        KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                                      KC_RALT, KC_RGUI, KC_APP,  KC_RCTL
+    ),
+
+    [1] = LAYOUT_all( /* 1: fn */
+        KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_UP,   KC_TRNS, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                                     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+
+    [2] = LAYOUT_all( /* 2: arrows */
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP,   KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                                     KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    [3] = LAYOUT_all( 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                                     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+
+};

keyboards/gh60/satan/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/handwired/bluepill/bluepill70/rules.mk

@@ -1,51 +1,9 @@
-# project specific files
-SRC =	matrix.c \
-	    led.c
-
-# GENERIC STM32F103C8T6 board - stm32duino bootloader
-#OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
-#MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
-#BOARD = GENERIC_STM32_F103
-
-# GENERIC STM32F103C8T6 board - no bootloader (programmer over serial or SWD) //  Modified by Xydane
-OPT_DEFS =
-MCU_LDSCRIPT = STM32F103x8
-BOARD = GENERIC_STM32_F103
-
-# MAPLE MINI
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x5000
-# MCU_LDSCRIPT = STM32F103xB_maplemini_bootloader
-# BOARD = MAPLEMINI_STM32_F103
-
-## chip/board settings
-# the next two should match the directories in
-#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F1xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#  or <this_dir>/ld/
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f1xx
-# it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m3
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
-
+# MCU name
+MCU = STM32F103
 
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
+
+# project specific files
+SRC = matrix.c \
+      led.c

keyboards/handwired/onekey/keymaps/i2c_scanner/config.h

@@ -0,0 +1,6 @@
+#pragma once
+
+// AVR: can change to other supported values
+#define F_SCL 100000UL
+
+// TODO: add some default ARM configs for i2cv1 and i2cv2

keyboards/handwired/onekey/keymaps/i2c_scanner/keymap.c

@@ -0,0 +1,66 @@
+#include QMK_KEYBOARD_H
+
+#include "i2c_master.h"
+#include "debug.h"
+
+#define TIMEOUT 50
+
+// TODO: remove patch
+#ifdef PROTOCOL_CHIBIOS
+#    pragma message("ChibiOS is currently 'best effort' and might not report accurate results")
+
+i2c_status_t i2c_start_bodge(uint8_t address, uint16_t timeout) {
+    i2c_start(address);
+
+    // except on ChibiOS where the only way is do do "something"
+    uint8_t data = 0;
+    return i2c_readReg(address, 0, &data, sizeof(data), TIMEOUT);
+}
+
+#    define i2c_start i2c_start_bodge
+#endif
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    LAYOUT(KC_A)  //
+};
+
+void do_scan(void) {
+    uint8_t nDevices = 0;
+
+    dprintf("Scanning...\n");
+
+    for (uint8_t address = 1; address < 127; address++) {
+        // The i2c_scanner uses the return value of
+        // i2c_start to see if a device did acknowledge to the address.
+        i2c_status_t error = i2c_start(address << 1, TIMEOUT);
+        if (error == I2C_STATUS_SUCCESS) {
+            i2c_stop();
+            dprintf("  I2C device found at address 0x%02X\n", address);
+            nDevices++;
+        } else {
+            // dprintf("  Unknown error (%u) at address 0x%02X\n", error, address);
+        }
+    }
+
+    if (nDevices == 0)
+        dprintf("No I2C devices found\n");
+    else
+        dprintf("done\n");
+}
+
+uint16_t scan_timer = 0;
+
+void matrix_scan_user(void) {
+    if (timer_elapsed(scan_timer) > 5000) {
+        do_scan();
+        scan_timer = timer_read();
+    }
+}
+
+void keyboard_post_init_user(void) {
+    debug_enable = true;
+    debug_matrix = true;
+
+    i2c_init();
+    scan_timer = timer_read();
+}

keyboards/handwired/onekey/keymaps/i2c_scanner/readme.md

@@ -0,0 +1,36 @@
+# i2c_scanner
+
+Aiming to provide a more qmk friendly version of <https://playground.arduino.cc/Main/I2cScanner/>
+
+> This very simple ~~sketch~~ keymap scans the I2C-bus for devices. If a device is found, it is reported to the ~~Arduino serial monitor~~ console.
+
+
+## Flashing
+
+Pick a target that is aligned to the MCU you want to test:
+
+```console
+make handwired/onekey/elite_c:i2c_scanner:flash # also 32u4 + dfu bootloader
+make handwired/onekey/promicro:i2c_scanner:flash
+make handwired/onekey/teensy_2:i2c_scanner:flash
+
+# ChibiOS is currently 'best effort' and might not report accurate results
+make handwired/onekey/proton_c:i2c_scanner:flash
+```
+
+others might work with additional configuration.
+
+## Usage
+
+Output is viewable through a compatible tool <https://docs.qmk.fm/#/newbs_testing_debugging?id=debugging-tools>.
+
+You can change the wires, and plug-in I2C devices while the i2c_scanner is running.
+
+The output of the console will look like this:
+
+```
+Listening:
+Scanning...
+  I2C device found at address 0x20
+done
+```

keyboards/handwired/onekey/keymaps/i2c_scanner/rules.mk

@@ -0,0 +1,3 @@
+CONSOLE_ENABLE = yes
+
+QUANTUM_LIB_SRC += i2c_master.c

keyboards/hs60/v2/ansi/rules.mk

@@ -30,4 +30,4 @@ SRC =	keyboards/wilba_tech/wt_main.c \
 		keyboards/wilba_tech/wt_rgb_backlight.c \
 		drivers/issi/is31fl3733.c \
 		quantum/color.c \
-		drivers/arm/i2c_master.c
+		drivers/chibios/i2c_master.c

keyboards/hs60/v2/hhkb/rules.mk

@@ -28,4 +28,4 @@ SRC =	keyboards/wilba_tech/wt_main.c \
 		keyboards/wilba_tech/wt_rgb_backlight.c \
 		drivers/issi/is31fl3733.c \
 		quantum/color.c \
-		drivers/arm/i2c_master.c
+		drivers/chibios/i2c_master.c

keyboards/hs60/v2/iso/rules.mk

@@ -30,4 +30,4 @@ SRC =	keyboards/wilba_tech/wt_main.c \
 		keyboards/wilba_tech/wt_rgb_backlight.c \
 		drivers/issi/is31fl3733.c \
 		quantum/color.c \
-		drivers/arm/i2c_master.c
+		drivers/chibios/i2c_master.c

keyboards/jm60/rules.mk

@@ -1,41 +1,9 @@
-# project specific files
-SRC =	matrix.c \
-	led.c
+# MCU name
+MCU = STM32F103
 
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F1xx
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
 MCU_LDSCRIPT = jm60_bootloader
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f1xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
 BOARD = JM60_BOARD
 
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m3
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-# I.e. 6 for Teensy LC; 7 for Teensy 3.x
-ARMV = 7
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-#OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
-OPT_DEFS =
-
 # Build Options
 #   comment out to disable the options.
 #
@@ -51,10 +19,9 @@ CUSTOM_MATRIX = yes # Custom matrix file
 BACKLIGHT_ENABLE = no
 VISUALIZER_ENABLE = no
 
-#LED_DRIVER = is31fl3731c
-#LED_WIDTH = 16
-#LED_HEIGHT = 5
-
-
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
+
+# project specific files
+SRC = matrix.c \
+      led.c

keyboards/keebio/iris/keymaps/default/config.h

@@ -19,10 +19,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 // #define USE_I2C
 #define EE_HANDS
-
-#undef RGBLED_NUM
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 12
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8

keyboards/keebio/iris/keymaps/default/rules.mk

@@ -1,2 +0,0 @@
-RGBLIGHT_ENABLE = yes
-BACKLIGHT_ENABLE = yes

keyboards/keebio/iris/rev1/config.h

@@ -60,3 +60,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
 #define RGBLED_NUM 12    // Number of LEDs
+#define RGBLIGHT_ANIMATIONS

keyboards/keebio/iris/rev1/rules.mk

@@ -22,7 +22,7 @@ EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
 NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode

keyboards/keebio/iris/rev1_led/config.h

@@ -60,3 +60,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
 #define RGBLED_NUM 12    // Number of LEDs
+#define RGBLIGHT_ANIMATIONS

keyboards/keebio/iris/rev1_led/rules.mk

@@ -22,7 +22,7 @@ EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
 NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode

keyboards/keebio/iris/rev2/config.h

@@ -60,3 +60,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
 #define RGBLED_NUM 12    // Number of LEDs
+#define RGBLIGHT_ANIMATIONS

keyboards/keebio/iris/rev3/config.h

@@ -69,3 +69,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_DI_PIN F7
 #define RGBLED_NUM 12    // Number of LEDs
 #define RGBLED_SPLIT { 6, 6 }
+#define RGBLIGHT_ANIMATIONS

keyboards/keebio/iris/rev4/config.h

@@ -73,3 +73,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_DI_PIN D6
 #define RGBLED_NUM 12    // Number of LEDs
 #define RGBLED_SPLIT { 6, 6 }
+#define RGBLIGHT_ANIMATIONS

keyboards/m0lly/config.h

@@ -67,6 +67,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
+#define QMK_ESC_OUTPUT A0 // usually COL
+#define QMK_ESC_INPUT F4 // usually ROW
+#define QMK_LED D2 // NumLock on M0lly
+//#define QMK_SPEAKER C6
+
 /*
  * Force NKRO
  *

keyboards/m0lly/i2c.c

@@ -1,166 +0,0 @@
-#include <util/twi.h>
-#include <avr/io.h>
-#include <stdlib.h>
-#include <avr/interrupt.h>
-#include <util/twi.h>
-#include <stdbool.h>
-#include "i2c.h"
-
-#ifdef USE_I2C
-
-// Limits the amount of we wait for any one i2c transaction.
-// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
-// 9 bits, a single transaction will take around 90μs to complete.
-//
-// (F_CPU/SCL_CLOCK)  =>  # of μC cycles to transfer a bit
-// poll loop takes at least 8 clock cycles to execute
-#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
-
-#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
-
-volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
-
-static volatile uint8_t slave_buffer_pos;
-static volatile bool slave_has_register_set = false;
-
-// Wait for an i2c operation to finish
-inline static
-void i2c_delay(void) {
-  uint16_t lim = 0;
-  while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
-    lim++;
-
-  // easier way, but will wait slightly longer
-  // _delay_us(100);
-}
-
-// Setup twi to run at 100kHz
-void i2c_master_init(void) {
-  // no prescaler
-  TWSR = 0;
-  // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
-  // Check datasheets for more info.
-  TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
-}
-
-// Start a transaction with the given i2c slave address. The direction of the
-// transfer is set with I2C_READ and I2C_WRITE.
-// returns: 0 => success
-//          1 => error
-uint8_t i2c_master_start(uint8_t address) {
-  TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
-
-  i2c_delay();
-
-  // check that we started successfully
-  if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
-    return 1;
-
-  // send device address
-  TWDR = address;
-  TWCR = (1<<TWINT) | (1<<TWEN);
-
-  i2c_delay();
-
-  if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
-    return 1; // slave did not acknowledge
-  else
-    return 0; // success
-}
-
-
-// Finish the i2c transaction.
-void i2c_master_stop(void) {
-  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-
-  uint16_t lim = 0;
-  while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
-    lim++;
-}
-
-// Write one byte to the i2c slave.
-// returns 0 => slave ACK
-//         1 => slave NACK
-uint8_t i2c_master_write(uint8_t data) {
-  TWDR = data;
-  TWCR = (1<<TWINT) | (1<<TWEN);
-
-  i2c_delay();
-
-  // check if the slave acknowledged us
-  return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
-}
-
-// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
-// if ack=0 the acknowledge bit is not set.
-// returns: byte read from i2c device
-uint8_t i2c_master_read(int ack) {
-  TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
-
-  i2c_delay();
-  return TWDR;
-}
-
-void i2c_reset_state(void) {
-  TWCR = 0;
-}
-
-void i2c_slave_init(uint8_t address) {
-  TWAR = address << 0; // slave i2c address
-  // TWEN  - twi enable
-  // TWEA  - enable address acknowledgement
-  // TWINT - twi interrupt flag
-  // TWIE  - enable the twi interrupt
-  TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
-}
-
-ISR(TWI_vect);
-
-ISR(TWI_vect) {
-  uint8_t ack = 1;
-  switch(TW_STATUS) {
-    case TW_SR_SLA_ACK:
-      // this device has been addressed as a slave receiver
-      slave_has_register_set = false;
-      break;
-
-    case TW_SR_DATA_ACK:
-      // this device has received data as a slave receiver
-      // The first byte that we receive in this transaction sets the location
-      // of the read/write location of the slaves memory that it exposes over
-      // i2c.  After that, bytes will be written at slave_buffer_pos, incrementing
-      // slave_buffer_pos after each write.
-      if(!slave_has_register_set) {
-        slave_buffer_pos = TWDR;
-        // don't acknowledge the master if this memory loctaion is out of bounds
-        if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
-          ack = 0;
-          slave_buffer_pos = 0;
-        }
-        slave_has_register_set = true;
-      } else {
-        i2c_slave_buffer[slave_buffer_pos] = TWDR;
-        BUFFER_POS_INC();
-      }
-      break;
-
-    case TW_ST_SLA_ACK:
-    case TW_ST_DATA_ACK:
-      // master has addressed this device as a slave transmitter and is
-      // requesting data.
-      TWDR = i2c_slave_buffer[slave_buffer_pos];
-      BUFFER_POS_INC();
-      break;
-
-    case TW_BUS_ERROR: // something went wrong, reset twi state
-      TWCR = 0;
-    default:
-      break;
-  }
-  // Reset everything, so we are ready for the next TWI interrupt
-  TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
-}
-
-
-
-#endif

keyboards/m0lly/i2c.h

@@ -1,49 +0,0 @@
-#ifndef I2C_H
-#define I2C_H
-
-#include <stdint.h>
-
-#ifndef F_CPU
-#define F_CPU 16000000UL
-#endif
-
-#define I2C_READ 1
-#define I2C_WRITE 0
-
-#define I2C_ACK 1
-#define I2C_NACK 0
-
-#define SLAVE_BUFFER_SIZE 0x10
-
-// i2c SCL clock frequency
-#define SCL_CLOCK  800000L
-
-extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
-
-void i2c_master_init(void);
-uint8_t i2c_master_start(uint8_t address);
-void i2c_master_stop(void);
-uint8_t i2c_master_write(uint8_t data);
-uint8_t i2c_master_read(int);
-void i2c_reset_state(void);
-void i2c_slave_init(uint8_t address);
-
-
-static inline unsigned char i2c_start_read(unsigned char addr) {
-  return i2c_master_start((addr << 1) | I2C_READ);
-}
-
-static inline unsigned char i2c_start_write(unsigned char addr) {
-  return i2c_master_start((addr << 1) | I2C_WRITE);
-}
-
-// from SSD1306 scrips
-extern unsigned char i2c_rep_start(unsigned char addr);
-extern void i2c_start_wait(unsigned char addr);
-extern unsigned char i2c_readAck(void);
-extern unsigned char i2c_readNak(void);
-extern unsigned char i2c_read(unsigned char ack);
-
-#define i2c_read(ack)  (ack) ? i2c_readAck() : i2c_readNak();
-
-#endif

keyboards/m0lly/keymaps/default/keymap.c

@@ -13,11 +13,8 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
+ 
 #include QMK_KEYBOARD_H
-#include "LUFA/Drivers/Peripheral/TWI.h"
-#include "i2c.h"
-#include "ssd1306.h"
-
 
 //Layers
 
@@ -26,13 +23,6 @@ enum {
   FUNCTION,
 };
 
-bool screenWorks = 0;
-
-//13 characters max without re-writing the "Layer: " format in iota_gfx_task_user()
-static char layer_lookup[][14] = {"Base","Function"};
-
-
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   /* Keymap BASE: (Base Layer) Default Layer
    * 
@@ -78,72 +68,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ),
 };
 
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
+#ifdef OLED_DRIVER_ENABLE
+void oled_task_user(void) {
+    oled_write_P(PSTR("TKC1800\n"),false);
+	// Host Keyboard Layer Status
+    oled_write_P(PSTR("Layer: "), false);
 
-void led_set_user(uint8_t usb_led) {
-
-}
-
-void matrix_init_user(void) {
-  #ifdef USE_I2C
-    i2c_master_init();
-    #ifdef SSD1306OLED
-      // calls code for the SSD1306 OLED
-      _delay_ms(400);
-      TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000));
-      if ( iota_gfx_init() ) { // turns on the display
-        screenWorks = 1;
-      }
-    #endif
-  #endif
-  #ifdef AUDIO_ENABLE
-    startup_user();
-  #endif
-}
-
-void matrix_scan_user(void) {
-  #ifdef SSD1306OLED
-    if ( screenWorks ) {
-      iota_gfx_task();  // this is what updates the display continuously
-    };
-  #endif
-}
-
-void matrix_update(struct CharacterMatrix *dest,
-                          const struct CharacterMatrix *source) {
-  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
-    memcpy(dest->display, source->display, sizeof(dest->display));
-    dest->dirty = true;
-  }
-}
-
-void iota_gfx_task_user(void) {
-  #if DEBUG_TO_SCREEN
-    if (debug_enable) {
-      return;
+    switch (get_highest_layer(layer_state)) {
+        case BASE:
+            oled_write_P(PSTR("Base\n"), false);
+            break;
+        case FUNCTION:
+            oled_write_P(PSTR("Function\n"), false);
+            break;
+        default:
+            // Or use the write_ln shortcut over adding '\n' to the end of your string
+            oled_write_ln_P(PSTR("Undefined"), false);
     }
-  #endif
-
-  struct CharacterMatrix matrix;
-
-  matrix_clear(&matrix);
-  matrix_write_P(&matrix, PSTR("TKC M0LLY"));
-
-  uint8_t layer = biton32(layer_state);
-
-  char buf[40];
-  snprintf(buf,sizeof(buf), "Undef-%d", layer);
-  matrix_write_P(&matrix, PSTR("\nLayer: "));
-  matrix_write(&matrix, layer_lookup[layer]);
-
-  // Host Keyboard LED Status
-  char led[40];
-    snprintf(led, sizeof(led), "\n\n%s  %s  %s",
-            (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
-            (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
-            (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
-  matrix_write(&matrix, led);
-  matrix_update(&display, &matrix);
+	// Host Keyboard LED Status
+    led_t led_state = host_keyboard_led_state();
+    oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR("    "), false);
+    oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR("    "), false);
+    oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR("    "), false);
 }
+#endif

keyboards/m0lly/rules.mk

@@ -9,12 +9,12 @@ MCU = at90usb1286
 #   QMK DFU      qmk-dfu
 #   ATmega32A    bootloadHID
 #   ATmega328P   USBasp
-BOOTLOADER = atmel-dfu
+BOOTLOADER = qmk-dfu
 
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = yes        # Console for debug
@@ -29,6 +29,4 @@ MIDI_ENABLE = no            # MIDI controls
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
-
-SRC = i2c.c \
-	  ssd1306.c
+OLED_DRIVER_ENABLE = yes

keyboards/nk65/rules.mk

@@ -30,4 +30,4 @@ SRC =	keyboards/wilba_tech/wt_main.c \
 		keyboards/wilba_tech/wt_rgb_backlight.c \
 		drivers/issi/is31fl3733.c \
 		quantum/color.c \
-		drivers/arm/i2c_master.c
+		drivers/chibios/i2c_master.c

keyboards/palette1202/config.h

@@ -41,6 +41,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Encoders */
 #define ENCODERS_PAD_A { F4, F6 }
 #define ENCODERS_PAD_B { F5, F7 }
+#define ENCODER_RESOLUTION 2
+// if you want to reverse encoder direction
+// #define ENCODER_DIRECTION_FLIP
 
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5

keyboards/palette1202/keymaps/default/keymap.c

@@ -116,55 +116,55 @@ void encoder_update_user(uint8_t index, bool clockwise) {
         if (currentLayer % 2 == 0) {
           // default layer
           // Zoom
-          tap_code16(!clockwise ? G(KC_EQL) : G(KC_MINS));
+          tap_code16(!clockwise ? G(KC_MINS) : G(KC_EQL));
         } else {
           // Fn Layer
           // rotate canvas
-          tap_code(!clockwise ? KC_QUOT : KC_MINS);
+          tap_code(!clockwise ? KC_MINS : KC_QUOT);
         }
         break;
       case MAC_PS_1:
         if (currentLayer % 2 == 0) {
           // default layer
           // Zoom
-          tap_code16(!clockwise ? G(KC_EQL) : G(KC_MINS));
+          tap_code16(!clockwise ? G(KC_MINS) : G(KC_EQL));
         } else {
           // Fn Layer
           // undo / redo
-          tap_code16(!clockwise ? S(G(KC_Z)) : G(KC_Z));
+          tap_code16(!clockwise ? G(KC_Z) : S(G(KC_Z)));
         }
         break;
       case WIN_CS_1:
         if (currentLayer % 2 == 0) {
           // default layer
           // Zoom
-          tap_code16(!clockwise ? C(KC_EQL) : C(KC_MINS));
+          tap_code16(!clockwise ? C(KC_MINS) : C(KC_EQL));
         } else {
           // Fn Layer
           // rotate canvas
-          tap_code(!clockwise ? KC_QUOT : KC_MINS);
+          tap_code(!clockwise ? KC_MINS : KC_QUOT);
         }
         break;
       case WIN_PS_1:
         if (currentLayer % 2 == 0) {
           // default layer
           // Zoom
-          tap_code16(!clockwise ? C(KC_SCLN) : C(KC_MINS));
+          tap_code16(!clockwise ? C(KC_MINS) : C(KC_SCLN));
         } else {
           // Fn Layer
           // undo / redo
-          tap_code16(!clockwise ? C(S(KC_Z)) : C(KC_Z));
+          tap_code16(!clockwise ? C(KC_Z) : C(S(KC_Z)));
         }
         break;
       case IOS_CS_1:
         if (currentLayer % 2 == 0) {
           // default layer
           // Zoom 
-          tap_code16(!clockwise ? G(KC_SCLN) : G(KC_MINS));
+          tap_code16(!clockwise ? G(KC_MINS) : G(KC_SCLN));
         } else {
           // Fn Layer
           // rotate canvas
-          tap_code(!clockwise ? KC_EQL : KC_MINS);
+          tap_code(!clockwise ? KC_MINS : KC_EQL);
         }
         break;
       default:
@@ -176,55 +176,55 @@ void encoder_update_user(uint8_t index, bool clockwise) {
         if (currentLayer % 2 == 0) {
           // default layer
           // size of brush
-          tap_code(!clockwise ? KC_RBRC : KC_LBRC);
+          tap_code(!clockwise ? KC_LBRC : KC_RBRC);
         } else {
           // Fn Layer
           // opacity of brush
-          tap_code16(!clockwise ? G(KC_RBRC) : G(KC_LBRC));
+          tap_code16(!clockwise ? G(KC_LBRC) : G(KC_RBRC));
         }
         break;
       case MAC_PS_1:
         if (currentLayer % 2 == 0) {
           // default layer
           // size of brush
-          tap_code(!clockwise ? KC_RBRC : KC_LBRC);
+          tap_code(!clockwise ? KC_LBRC : KC_RBRC);
         } else {
           // Fn Layer
           // opacity of brush
-          tap_code16(!clockwise ? KC_RCBR : KC_LCBR);
+          tap_code16(!clockwise ? KC_LCBR : KC_RCBR);
         }
         break;
       case WIN_CS_1:
         if (currentLayer % 2 == 0) {
           // default layer
           // rotate canvas
-          tap_code(!clockwise ? KC_RBRC : KC_LBRC);
+          tap_code(!clockwise ? KC_LBRC : KC_RBRC);
         } else {
           // Fn Layer
           // opacity of brush
-          tap_code16(!clockwise ? C(KC_RBRC) : C(KC_LBRC));
+          tap_code16(!clockwise ? C(KC_LBRC) : C(KC_RBRC));
         }
         break;
       case WIN_PS_1:
         if (currentLayer % 2 == 0) {
           // default layer
           // rotate canvas
-          tap_code(!clockwise ? KC_RBRC : KC_LBRC);
+          tap_code(!clockwise ? KC_LBRC : KC_RBRC);
         } else {
           // Fn Layer
           // opacity of brush
-          tap_code16(!clockwise ? KC_RCBR : KC_LCBR);
+          tap_code16(!clockwise ? KC_LCBR : KC_RCBR);
         }
         break;
       case IOS_CS_1:
         if (currentLayer % 2 == 0) {
           // default layer
           // size of brush
-          tap_code(!clockwise ? KC_BSLS : KC_RBRC);
+          tap_code(!clockwise ? KC_RBRC : KC_BSLS);
         } else {
           // Fn Layer
           // opacity of brush
-          tap_code16(!clockwise ? G(KC_BSLS) : G(KC_RBRC));
+          tap_code16(!clockwise ? G(KC_RBRC) : G(KC_BSLS));
         }
         break;
       default:

keyboards/palette1202/readme.md

@@ -6,7 +6,7 @@ A left hand device with rotary encoder, for artists.
 
 * Keyboard Maintainer: [niltea](https://github.com/niltea)
 * Hardware Supported: Palette1202
-* Hardware Availability: [Pixiv Booth](https://booth.pm/)
+* Hardware Availability: [Pixiv Booth](https://niltea.booth.pm/)
 * [PCB & Case](https://github.com/niltea/Palette1202)
 
 Make example for this keyboard (after setting up your build environment):

keyboards/pdxkbc/config.h

@@ -20,8 +20,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x0000
+#define VENDOR_ID       0x5044 // PD
+#define PRODUCT_ID      0x0001
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    Franklin Harding
 #define PRODUCT         pdxkbc

keyboards/pdxkbc/keymaps/via/keymap.c

@@ -0,0 +1,41 @@
+/* Copyright 2019 Franklin Harding
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+      MACRO00, MACRO01,
+      MACRO02, MACRO03,
+      KC_VOLU,  KC_VOLD
+    ),
+
+    [1] = LAYOUT(
+      _______, _______,
+      _______, _______,
+      _______, _______
+    ),
+
+    [2] = LAYOUT(
+      _______, _______,
+      _______, _______,
+      _______, _______
+    ),
+
+    [3] = LAYOUT(
+      _______, _______,
+      _______, _______,
+      _______, _______
+    ),
+};

keyboards/pdxkbc/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/pdxkbc/pdxkbc.c

@@ -14,38 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "pdxkbc.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/

keyboards/projectkb/alice/config.h

@@ -66,6 +66,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Let VIA handle the QMK RGBLIGHT 
 #define VIA_QMK_RGBLIGHT_ENABLE
 
+// 2 bits for 4 layout options
+#define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2
+
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/projectkb/alice/keymaps/via/keymap.c

@@ -0,0 +1,56 @@
+/*
+Copyright 2020 Ryan Castillo <castillo.ryanmiguel@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_default(
+    KC_ESC,  	KC_TILD, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,   KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_DEL,  KC_BSPC,
+    KC_PGUP, 	KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,             KC_Y,   KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+    KC_PGDN, 	KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,             KC_H,   KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
+				KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,             KC_B,   KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_RGUI,
+				KC_LCTL,          KC_LALT, KC_SPC,  MO(1),                          KC_SPC,           KC_RALT,          KC_RCTL
+  ),
+  [1] = LAYOUT_default(
+    KC_TRNS,  	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS,  	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, 	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+				KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+				KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,          KC_TRNS,          KC_TRNS
+  ),
+  [2] = LAYOUT_default(
+    KC_TRNS,  	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS,  	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, 	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+				KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+				KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,          KC_TRNS,          KC_TRNS
+  ),
+  [3] = LAYOUT_default(
+    KC_TRNS,  	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS,  	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, 	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+				KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+				KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,          KC_TRNS,          KC_TRNS
+  )
+  
+};

keyboards/projectkb/alice/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/splitreus62/config.h

@@ -0,0 +1,77 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xBEEF
+#define PRODUCT_ID      0xFED0
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    NaCly
+#define PRODUCT         Splitreus62
+#define DESCRIPTION     Like you axed an atreus62
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 12
+#define MATRIX_COLS 6
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D3, D2, D1, D4, C6, D7 }
+#define MATRIX_COL_PINS { E6, B4, B5, B6, B2, B3 }
+
+#define DIODE_DIRECTION ROW2COL
+
+#define SPLIT_HAND_PIN F4
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* serial.c configuration for split keyboard */
+#define SOFT_SERIAL_PIN D0
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN B1
+
+#define RGBLED_NUM 12    // Number of LEDs
+
+#define RGBLED_SPLIT { 6, 6 }
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/splitreus62/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "splitreus62",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 15,
+    "height": 5.7,
+    "layouts": {
+      "LAYOUT": {
+        "layout": [{"x":0, "y":0.6}, {"x":1, "y":0.6}, {"x":2, "y":0.35}, {"x":3, "y":0}, {"x":4, "y":0.35}, {"x":5, "y":0.7}, {"x":9, "y":0.7}, {"x":10, "y":0.35}, {"x":11, "y":0}, {"x":12, "y":0.35}, {"x":13, "y":0.6}, {"x":14, "y":0.6}, {"x":0, "y":1.6}, {"x":1, "y":1.6}, {"x":2, "y":1.35}, {"x":3, "y":1}, {"x":4, "y":1.35}, {"x":5, "y":1.7}, {"x":9, "y":1.7}, {"x":10, "y":1.35}, {"x":11, "y":1}, {"x":12, "y":1.35}, {"x":13, "y":1.6}, {"x":14, "y":1.6}, {"x":0, "y":2.6}, {"x":1, "y":2.6}, {"x":2, "y":2.35}, {"x":3, "y":2}, {"x":4, "y":2.35}, {"x":5, "y":2.7}, {"x":9, "y":2.7}, {"x":10, "y":2.35}, {"x":11, "y":2}, {"x":12, "y":2.35}, {"x":13, "y":2.6}, {"x":14, "y":2.6}, {"x":0, "y":3.6}, {"x":1, "y":3.6}, {"x":2, "y":3.35}, {"x":3, "y":3}, {"x":4, "y":3.35}, {"x":5, "y":3.7}, {"x":9, "y":3.7}, {"x":10, "y":3.35}, {"x":11, "y":3}, {"x":12, "y":3.35}, {"x":13, "y":3.6}, {"x":14, "y":3.6}, {"x":0, "y":4.6}, {"x":1, "y":4.6}, {"x":2, "y":4.35}, {"x":3, "y":4}, {"x":4, "y":4.35}, {"x":5, "y":4.7}, {"x":6, "y":3.95, "h":1.5}, {"x":8, "y":3.95, "h":1.5}, {"x":9, "y":4.7}, {"x":10, "y":4.35}, {"x":11, "y":4}, {"x":12, "y":4.35}, {"x":13, "y":4.6}, {"x":14, "y":4.6}]
+      }
+    }
+  }

keyboards/splitreus62/keymaps/default/keymap.c

@@ -0,0 +1,50 @@
+/* Copyright 2019 NaCly
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,       KC_5,                      KC_6,    KC_7,       KC_8,    KC_9,    KC_0,    KC_MINS,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,       KC_T,                      KC_Y,    KC_U,       KC_I,    KC_O,    KC_P,    KC_BSLS,
+        KC_LCTL, KC_A,    KC_S,    KC_D,    LT(1,KC_F), KC_G,                      KC_H,    LT(2,KC_J), KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,       KC_B,                      KC_N,    KC_M,       KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+        KC_LCTL, KC_LGUI, KC_LALT, KC_GRV,  KC_EQL,     KC_BSPC, KC_DEL,  KC_ENT,  KC_SPC,  KC_LBRC,    KC_RBRC, KC_HOME, KC_END,  KC_ESC
+    ),
+    //Holding F
+    [1] = LAYOUT(
+        KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,                     KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
+        KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,                     KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,
+        KC_LCTL, KC_NO,   KC_NO,   KC_NO,   _______, KC_NO,                     KC_NO,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_NO,
+        KC_LSFT, KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,                     KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_RSFT,
+        KC_LCTL, KC_LGUI, KC_LALT, KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_HOME, KC_END,  KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO
+    ),
+    //Holding J
+    [2] = LAYOUT(
+        KC_MUTE, KC_VOLD, KC_VOLU, KC_NO,   KC_NO,   KC_NO,                     KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,
+        KC_NO,   KC_MPRV, KC_MPLY, KC_MNXT, KC_NO,   KC_NO,                     KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,
+        KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,                     KC_NO,   _______, KC_NO,   KC_NO,   KC_NO,   KC_NO,
+        KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,                     KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,
+        KC_LCTL, KC_LGUI, KC_LALT, KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_ENT,  KC_SPC,  KC_NO,   KC_NO,   KC_NO,   KC_NO,   TG(3)
+    ),
+    //game layer
+    [3] = LAYOUT(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,       KC_8,    KC_9,    KC_0,    KC_MINS,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                      KC_Y,    KC_U,       KC_I,    KC_O,    KC_P,    KC_BSLS,
+        KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                      KC_H,    LT(2,KC_J), KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,                      KC_N,    KC_M,       KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+        KC_LCTL, KC_NO,   KC_LALT, KC_GRV,  KC_SPC,  KC_BSPC, KC_DEL,  KC_ENT,  KC_SPC,  KC_LBRC,    KC_RBRC, KC_HOME, KC_END,  TO(0)
+    )
+};

keyboards/splitreus62/readme.md

@@ -0,0 +1,13 @@
+# splitreus62
+
+A split version of the [Atreus62](https://github.com/profet23/atreus62) by Profet23, which itself is based on Phil Hagelberg's [Atreus](https://github.com/technomancy/atreus). You can copy keymaps from Atreus62 and use them with this keyboard.
+
+* Keyboard Maintainer: [NaCly](https://github.com/Na-Cly)
+* Hardware Supported: splitreus62 PCBs, Pro Micro
+* Hardware Availability: https://github.com/Na-Cly/splitreus62
+
+Make example for this keyboard (after setting up your build environment):
+
+    make splitreus62:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/splitreus62/rules.mk

@@ -0,0 +1,35 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI controls
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
+UNICODE_ENABLE = no         # Unicode
+
+SPLIT_KEYBOARD = yes

keyboards/splitreus62/splitreus62.c

@@ -0,0 +1 @@
+#include "splitreus62.h"

keyboards/splitreus62/splitreus62.h

@@ -0,0 +1,26 @@
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT(\
+    L00, L01, L02, L03, L04, L05,                       R05, R04, R03, R02, R01, R00, \
+    L10, L11, L12, L13, L14, L15,                       R15, R14, R13, R12, R11, R10, \
+    L20, L21, L22, L23, L24, L25,                       R25, R24, R23, R22, R21, R20, \
+    L30, L31, L32, L33, L34, L35,                       R35, R34, R33, R32, R31, R30, \
+    L40, L41, L42, L43, L44, L45, L55,             R55, R45, R44, R43, R42, R41, R40  \
+)\
+    {\
+        { L00, L01, L02, L03, L04, L05 },     \
+        { L10, L11, L12, L13, L14, L15 },     \
+        { L20, L21, L22, L23, L24, L25 },     \
+        { L30, L31, L32, L33, L34, L35 },     \
+        { L40, L41, L42, L43, L44, L45 },     \
+        { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, L55 },   \
+\
+        { R00, R01, R02, R03, R04, R05 },    \
+        { R10, R11, R12, R13, R14, R15 },    \
+        { R20, R21, R22, R23, R24, R25 },    \
+        { R30, R31, R32, R33, R34, R35 },    \
+        { R40, R41, R42, R43, R44, R45 },    \
+        { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, R55 }   \
+}

keyboards/uranuma/config.h

@@ -0,0 +1,236 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x112D
+#define DEVICE_VER 0x0001
+#define MANUFACTURER yohewi
+#define PRODUCT UraNuma
+#define DESCRIPTION Series of numa
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 10
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, D2, D4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+// #endif
+
+// fix iPhone and iPad power adapter issue
+// iOS device need lessthan 100
+#define USB_MAX_POWER_CONSUMPTION 100
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/uranuma/info.json

@@ -0,0 +1,63 @@
+{
+  "keyboard_name": "Uranuma", 
+  "url": "", 
+  "maintainer": "yohewi", 
+  "width": 13, 
+  "height": 5.7, 
+  "layouts": {
+    "LAYOUT": {
+      "layout": [
+        {"label":"k00", "x":0 , "y":0.62},
+        {"label":"k01", "x":1 , "y":0.36},
+        {"label":"k02", "x":2 , "y":0},
+        {"label":"k03", "x":3 , "y":0.09},
+        {"label":"k04", "x":4 , "y":0.70},
+        {"label":"k05", "x":8 , "y":0.70},
+        {"label":"k06", "x":9 , "y":0.09},
+        {"label":"k07", "x":10, "y":0},
+        {"label":"k08", "x":11, "y":0.36},
+        {"label":"k09", "x":12, "y":0.62},
+
+        {"label":"k10", "x":0 , "y":1.62},
+        {"label":"k11", "x":1 , "y":1.36},
+        {"label":"k12", "x":2 , "y":1},
+        {"label":"k13", "x":3 , "y":1.09},
+        {"label":"k14", "x":4 , "y":1.70},
+        {"label":"k15", "x":8 , "y":1.70},
+        {"label":"k16", "x":9 , "y":1.09},
+        {"label":"k17", "x":10, "y":1},
+        {"label":"k18", "x":11, "y":1.36},
+        {"label":"k19", "x":12, "y":1.62},
+
+        {"label":"k20", "x":0 , "y":2.62},
+        {"label":"k21", "x":1 , "y":2.36},
+        {"label":"k22", "x":2 , "y":2},
+        {"label":"k23", "x":3 , "y":2.09},
+        {"label":"k24", "x":4 , "y":2.70},
+        {"label":"k25", "x":8 , "y":2.70},
+        {"label":"k26", "x":9 , "y":2.09},
+        {"label":"k27", "x":10, "y":2},
+        {"label":"k28", "x":11, "y":2.36},
+        {"label":"k29", "x":12, "y":2.62},
+
+        {"label":"k30", "x":0 , "y":3.62},
+        {"label":"k31", "x":1 , "y":3.36},
+        {"label":"k32", "x":2 , "y":3},
+        {"label":"k33", "x":3 , "y":3.09},
+        {"label":"k34", "x":4 , "y":3.70},
+        {"label":"k44", "x":5, "y":2.44, "h":2},
+        {"label":"k45", "x":7, "y":2.44, "h":2},
+        {"label":"k35", "x":8 , "y":3.70},
+        {"label":"k36", "x":9 , "y":3.09},
+        {"label":"k37", "x":10, "y":3},
+        {"label":"k38", "x":11, "y":3.36},
+        {"label":"k39", "x":12, "y":3.62},
+
+        {"label":"k40", "x":0, "y":4.70, "w":1.5},
+        {"label":"k41", "x":1.5, "y":4.70},
+        {"label":"k48", "x":10.5, "y":4.70},
+        {"label":"k49", "x":11.5, "y":4.70, "w":1.5}
+      ]
+    }
+  }
+}

keyboards/uranuma/keymaps/default/keymap.c

@@ -0,0 +1,65 @@
+#include QMK_KEYBOARD_H
+
+enum layer_number {
+  _BASE,
+  _LOWER,
+  _RAISE,
+};
+
+enum custom_keycodes {
+  KANJI = SAFE_RANGE,
+};
+
+// Layer Mode aliases
+#define KC_ZSFT  LSFT_T(KC_Z)
+#define KC_MNSF  LSFT_T(KC_MINS)
+#define KC_ESCT  LCTL_T(KC_ESC)
+#define KC_TBAL  LALT_T(KC_TAB)
+#define ALT_GRV  LALT(KC_GRV)
+#define LOWER    MO(_LOWER)
+#define RAISE    MO(_RAISE)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_BASE] = LAYOUT(
+     //.--------------------------------------------.                     .--------------------------------------------.
+        KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                          KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,
+     //|--------+--------+--------+--------+--------|                     |--------+--------+--------+--------+--------|
+        KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                          KC_H,    KC_J,    KC_K,    KC_L,    KC_BSLS,
+     //|--------+--------+--------+--------+--------|                     |--------+--------+--------+--------+--------|
+        KC_ZSFT, KC_X,    KC_C,    KC_V,    KC_B,                          KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_MNSF,
+     //|--------+--------+--------+--------+--------+--------.   .--------+--------+--------+--------+--------+--------|
+        KC_ESCT, KC_TBAL, KC_PSCR, KC_LALT, KC_SPC,  KC_BSPC,     KC_ENT,  KC_ENT,  ALT_GRV, KC_SLSH, KC_BSLS, KC_RBRC,
+     //|--------+--------+--------+--------+--------+--------'   '--------+--------+--------+--------+--------+--------|
+        KC_LSFT, LOWER,                                                                               RAISE,   KC_RCTL
+     //'-----------------'                                                                           '-----------------'
+    ),
+
+    [_LOWER] = LAYOUT(
+     //.--------------------------------------------.                     .--------------------------------------------.
+        KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                          KC_6,    KC_7,    KC_8,    KC_9,    KC_0,
+     //|--------+--------+--------+--------+--------|                     |--------+--------+--------+--------+--------|
+        KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                         KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,
+     //|--------+--------+--------+--------+--------|                     |--------+--------+--------+--------+--------|
+        KC_F11,  KC_F12,  XXXXXXX, XXXXXXX, XXXXXXX,                       XXXXXXX, XXXXXXX, KC_SCLN, KC_UP,   KC_EQL,
+     //|--------+--------+--------+--------+--------+--------.   .--------+--------+--------+--------+--------+--------|
+        KC_ESCT, KC_TBAL, KC_LGUI, KC_ENT,  KC_BSPC, KC_SPC,      KC_ENT,  KC_LALT, KANJI,   KC_LEFT, KC_DOWN, KC_RGHT,
+     //|--------+--------+--------+--------+--------+--------'   '--------+--------+--------+--------+--------+--------|
+        KC_LSFT, LOWER,                                                                               RAISE,   KC_RCTL
+     //'-----------------'                                                                           '-----------------'
+    ),
+
+    [_RAISE] = LAYOUT(
+     //.--------------------------------------------.                     .--------------------------------------------.
+        KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                          KC_6,    KC_7,    KC_8,    KC_9,    KC_0,
+     //|--------+--------+--------+--------+--------|                     |--------+--------+--------+--------+--------|
+        KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                         KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,
+     //|--------+--------+--------+--------+--------|                     |--------+--------+--------+--------+--------|
+        KC_F11,  KC_F12,  XXXXXXX, KANJI,   XXXXXXX,                       XXXXXXX, XXXXXXX, XXXXXXX, KC_UP,   KC_RO,
+     //|--------+--------+--------+--------+--------+--------.   .--------+--------+--------+--------+--------+--------|
+        KC_ESCT, KC_TBAL, KC_LGUI, LOWER,   KC_BSPC, KC_SPC,      KC_ENT,  KC_ENT,  KANJI,   KC_LEFT, KC_DOWN, KC_RGHT,
+     //|--------+--------+--------+--------+--------+--------'   '--------+--------+--------+--------+--------+--------|
+        KC_RSFT, LOWER,                                                                               RAISE,   KC_RCTL
+     //'-----------------'                                                                           '-----------------'
+    ),
+
+};

keyboards/uranuma/readme.md

@@ -0,0 +1,15 @@
+# uranuma
+
+It is a keyboard to input using fingers and palms.
+
+
+* Keyboard Maintainer: yohewi(yohewi@gmail.com)
+* Hardware Supported: UraNuma PCB
+* Github [github.com/yohewi](https://github.com/yohewi)
+* Hardware Availability: PCB, [Booth Shop](https://rt421.booth.pm/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make uranuma:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/uranuma/rules.mk

@@ -0,0 +1,36 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
+
+#COMBO_ENABLE = yes
+#SRC +=  .nicola.c \

keyboards/uranuma/uranuma.c

@@ -0,0 +1 @@
+#include "uranuma.h"

keyboards/uranuma/uranuma.h

@@ -0,0 +1,26 @@
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+
+#define LAYOUT( \
+    k00, k01, k02, k03, k04,               k05, k06, k07, k08, k09, \
+    k10, k11, k12, k13, k14,               k15, k16, k17, k18, k19, \
+    k20, k21, k22, k23, k24,               k25, k26, k27, k28, k29, \
+    k30, k31, k32, k33, k34, k44,     k45, k35, k36, k37, k38, k39, \
+    k40, k41,                                             k48, k49  \
+) { \
+    { k00, k01, k02,   k03,   k04, k05, k06,   k07,   k08, k09 }, \
+    { k10, k11, k12,   k13,   k14, k15, k16,   k17,   k18, k19 }, \
+    { k20, k21, k22,   k23,   k24, k25, k26,   k27,   k28, k29 }, \
+    { k30, k31, k32,   k33,   k34, k35, k36,   k37,   k38, k39 }, \
+    { k40, k41, KC_NO, KC_NO, k44, k45, KC_NO, KC_NO, k48, k49 }  \
+}

keyboards/wheatfield/blocked65/blocked65.c

@@ -0,0 +1 @@
+#include "blocked65.h"

keyboards/wheatfield/blocked65/blocked65.h

@@ -0,0 +1,18 @@
+#pragma once
+#include "quantum.h"
+
+// readability
+#define _x_ KC_NO
+#define LAYOUT_65_ansi_blocker( \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
+  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, K2E, \
+  K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
+  K40, K41, K42,                K46,                K4A, K4B, K4C, K4D, K4E  \
+){ \
+  { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
+  { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \
+  { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, _x_, K2D, K2E }, \
+  { K30, _x_, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
+  { K40, K41, K42, _x_, _x_, _x_, K46, _x_, _x_, _x_, K4A, K4B, K4C, K4D, K4E }, \
+}

keyboards/wheatfield/blocked65/config.h

@@ -0,0 +1,61 @@
+/*
+Copyright 2019 Maarten Dekkers <maartenwut@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Dou
+#define PRODUCT         Blocked65
+#define DESCRIPTION     65% keyboard with arrow cluster blocker
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7 }
+#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, F7, F6, F5, F4, F1, F0 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+#define BACKLIGHT_PIN B6
+#define BACKLIGHT_LEVELS 6
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Backlight configuration
+ */
+#define RGB_DI_PIN E2
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 2

keyboards/wheatfield/blocked65/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "Wheatfield blocked 65% keyboard", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 16, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT_65_ansi_blocker": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"PrScr", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Del", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgUp", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"PgDn", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Fn", "x":10, "y":4, "w":1.25}, {"label":"Alt", "x":11.25, "y":4, "w":1.25}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
+        }
+    }
+}

keyboards/wheatfield/blocked65/keymaps/default/keymap.c

@@ -0,0 +1,31 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+enum layers {
+  _BL,
+  _FL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [_BL] = LAYOUT_65_ansi_blocker(
+        KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_INS,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGUP,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_PGDN,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    [_FL] = LAYOUT_65_ansi_blocker(
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_PSCR,
+        KC_TRNS, KC_NO,   KC_UP,   KC_NO,   RGB_TOG, RGB_VAI, RGB_HUI, RGB_SAI, KC_INS,  RESET,   KC_PSCR, KC_SLCK, KC_PAUS, KC_BSLS, KC_SLCK,
+        KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, RGB_MOD, RGB_VAD, RGB_HUD, RGB_SAD, KC_NO,   KC_NO,   KC_F14,  KC_F15,           KC_INS,  KC_HOME,
+        KC_LSFT,          KC_MPRV, KC_MPLY, KC_MNXT, KC_NO,   BL_TOGG, KC_NO,   KC_MUTE, KC_VOLD, KC_VOLU, KC_NO,   KC_RSFT, RGB_MOD, KC_END,
+        KC_LCTL, KC_LGUI, KC_LALT,                            RESET,                              KC_RALT, KC_TRNS, KC_HOME, BL_STEP, KC_END
+    )
+
+};

keyboards/wheatfield/blocked65/readme.md

@@ -0,0 +1,13 @@
+# Wheatfield Blocked65%
+
+A 65% PCB sold via TaoBao, commonly sold as part of the Canoe clone referred to as Fanoe.
+
+* Keyboard Maintainer: QMK Community
+* Hardware Supported: Wheatfield Blocked65%
+* Hardware Availability: [taobao.com](https://item.taobao.com/item.htm?id=570827341563&spm=1101.1101.N.N.b124829)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make wheatfield/blocked65:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).