Move running pytest to travis_test (#7005)

* Cleanup rules.mk for 32U4 keyboards, G

* Update keyboards/gray_studio/cod67/rules.mk

docs/config_options.md

@@ -267,6 +267,14 @@ There are a few different ways to set handedness for split keyboards (listed in
     * 4: about 26kbps
     * 5: about 20kbps
 
+* `#define SPLIT_USB_DETECT`
+  * Detect (with timeout) USB connection when delegating master/slave
+  * Default behavior for ARM
+  * Required for AVR Teensy
+
+* `#define SPLIT_USB_TIMEOUT 2500`
+  * Maximum timeout when detecting master/slave when using `SPLIT_USB_DETECT`
+
 # The `rules.mk` File
 
 This is a [make](https://www.gnu.org/software/make/manual/make.html) file that is included by the top-level `Makefile`. It is used to set some information about the MCU that we will be compiling for as well as enabling and disabling certain features.

docs/feature_key_lock.md

@@ -16,7 +16,7 @@ First, enable Key Lock by setting `KEY_LOCK_ENABLE = yes` in your `rules.mk`. Th
 
 ## Caveats
 
-Key Lock is only able to hold standard action keys and [One Shot modifier](quantum_keycodes.md#one-shot-keys) keys (for example, if you have your Shift defined as `OSM(KC_LSFT)`).
+Key Lock is only able to hold standard action keys and [One Shot modifier](feature_advanced_keycodes.md#one-shot-keys) keys (for example, if you have your Shift defined as `OSM(KC_LSFT)`).
 This does not include any of the QMK special functions (except One Shot modifiers), or shifted versions of keys such as `KC_LPRN`. If it's in the [Basic Keycodes](keycodes_basic.md) list, it can be held.
 
 Switching layers will not cancel the Key Lock.

docs/feature_split_keyboard.md

@@ -190,6 +190,18 @@ This sets how many LEDs are directly connected to each controller.  The first nu
 ?> This setting implies that `RGBLIGHT_SPLIT` is enabled, and will forcibly enable it, if it's not.
 
 
+```c
+#define SPLIT_USB_DETECT
+```
+This option changes the startup behavior to detect an active USB connection when delegating master/slave. If this operation times out, then the half is assume to be a slave. This is the default behavior for ARM, and required for AVR Teensy boards (due to hardware limitations).
+
+?> This setting will stop the ability to demo using battery packs.
+
+```c
+#define SPLIT_USB_TIMEOUT 2500
+```
+This sets the maximum timeout when detecting master/slave when using `SPLIT_USB_DETECT`.
+
 ## Additional Resources
 
 Nicinabox has a [very nice and detailed guide](https://github.com/nicinabox/lets-split-guide) for the Let's Split keyboard, that covers most everything you need to know, including troubleshooting information. 

docs/feature_tap_dance.md

@@ -447,9 +447,6 @@ int cur_dance (qk_tap_dance_state_t *state);
 //Functions associated with individual tap dances
 void ql_finished (qk_tap_dance_state_t *state, void *user_data);
 void ql_reset (qk_tap_dance_state_t *state, void *user_data);
-
-//Declare variable to track which layer is active
-int active_layer;
 ```
 
 Towards the bottom of your `keymap.c`, include the following code:

docs/fr-FR/ChangeLog/20190830.md

@@ -0,0 +1,52 @@
+# QMK Breaking Change - 30 août 2019
+
+Quatre fois par an, QMK lance un processus pour fusionner les Breaking Changes. Un Breaking Change est un changement qui modifie la manière dont QMK fonctionne introduisant des incompatibilités ou des comportements dangereux. Nous n'effectuons ces changements que 4 fois par an afin que les utilisateurs n'aient pas peur de casser leurs keymaps en mettant à jour leur version de QMK.
+
+Ce document présente les fusions de Breaking Change. Voici la liste des changements.
+
+## Formattage de code Core avec clang-format
+
+* Tous les fichiers core (`drivers/`, `quantum/`, `tests/`, et `tmk_core/`) seront formattés avec clang-format
+* Un processus travis pour reformatter les PRs lors de la fusion a été mis en place
+* Vous pouvez utiliser la nouvelle commande CLI `qmk cformat` afin de formatter avant de soumettre votre PR si vous le souhaitez.
+
+## Nettoyage des descripteurs LUFA USB
+
+* Nettoyage du code lié aux descripteurs USB HID sur les claviers AVR, afin de les rendre plus simple à lire et compréhensibles
+* Plus d'information:  https://github.com/qmk/qmk_firmware/pull/4871
+* Normalement pas de changement de fonctionnement et aucune keymap modifiée.
+
+## Migration des entrées de `ACTION_LAYER_MOMENTARY()` dans `fn_actions` vers des keycodes `MO()`
+
+* `fn_actions` est déprécié, et ses fonctionnalités ont été remplacées par des keycodes directs et `process_record_user()`
+* Supprimer cette fonctionnalité obsolète devrait aboutir à une réduction importante de la taille du firmware et de la complexité du code
+* Il est recommandé que toutes les keymaps affectées remplacent `fn_actions` vers les fonctionnalités de [keycode custom](https://docs.qmk.fm/#/custom_quantum_functions) et [macro](https://docs.qmk.fm/#/feature_macros)
+
+## Mise à jour Atreus vers les conventions de codage courantes
+
+* Les doublons include guards ont contourné le comportement de traitement des headers attendu
+* Il est recommandé pour toutes les keymaps affectées de supprimer le doublon de `<keyboard>/config.h` et `<keyboard>/keymaps/<user>/config.h` et de ne garder que des surcharges au niveau keymap
+
+## Récupération des changements de fichier keymap langage de la fork ZSA
+
+* Corrige une issue dans le fichier `keymap_br_abnt2.h` qui inclut la mauvaise souce (`keymap_common.h` au lieu de `keymap.h`)
+* Met à jour le fichier `keymap_swedish.h` afin d'être spécifique au suédois et plus "nordique" en général.
+* Toutes les keymaps qui utilisent ceci devront supprimer `NO_*` et le remplacer par `SE_*`.
+
+## Mise à jour du repo afin d'utiliser LUFA comme un sous-module git
+
+* `/lib/LUFA` supprimé du dépôt
+* LUFA, définis comme un sous-module, pointe vers qmk/lufa
+* Ceci devrait ajouter plus de flexibilité vers LUFA, et nous permet de garder le sous-module à jour bien plus facilement. Il avait environ 2 ans de retard, sans manière simple de corriger. Ce changement devrait simplifier la mise à jour dans le futur.
+
+## Migration des entrées `ACTION_BACKLIGHT_*()` dans `fn_actions` vers des keycodes `BL_`
+
+* `fn_actions` est déprécié, et ses fonctionnalités ont été remplacées par des keycodes directs et `process_record_user()`
+* Toutes les keymaps utilisant ces actions doivent avoir les clés `KC_FN*` remplacées par les clés `BL_*` équivalentes
+* Si vous utilisez actuellement `KC_FN*` vous devrez remplacer `fn_actions` avec les fonctionnalités de [keycode custom](https://docs.qmk.fm/#/custom_quantum_functions) et [macro](https://docs.qmk.fm/#/feature_macros)
+
+## Remplacer l'alias `KC_DELT` par `KC_DEL`
+
+* `KC_DELT` était un alias redondant et non documenté pour `KC_DELETE`
+* Il a été supprimé et toutes ses utilisations ont été remplacées par l'alias plus courant `KC_DEL`
+* Environ 90 keymaps (surtout des boards ErgoDox) ont été modifiées à cette fin

docs/fr-FR/_summary.md

@@ -8,19 +8,19 @@
   * [Bonnes pratiques Git](fr-FR/newbs_best_practices.md)
   * [Ressources d'apprentissage](fr-FR/newbs_learn_more_resources.md)
 
+* [Les bases de QMK](fr-FR/README.md)
+  * [Indroduction à QMK](fr-FR/getting_started_introduction.md)
+  * [QMK CLI](fr-FR/cli.md)
+  * [Configuration de la CLI QMK](fr-FR/cli_configuration.md)
+  * [Contribuer à QMK](fr-FR/contributing.md)
+  * [Comment utiliser GitHub](fr-FR/getting_started_github.md)
+  * [Trouver de l'aide](fr-FR/getting_started_getting_help.md)
+
+* [Breaking changes](fr-FR/breaking_changes.md)
+  * [30 août 2019](fr-FR/ChangeLog/20190830.md)
+
 **En Anglais**
 
-* [Les bases de QMK](README.md)
-  * [Introduction à QMK](getting_started_introduction.md)
-  * [QMK en ligne de commande](cli.md)
-  * [Configurer les lignes de commandes CLI](cli_configuration.md)
-  * [Contribuer à QMK](contributing.md)
-  * [Comment utiliser Github](getting_started_github.md)
-  * [Obtenir de l’aide](getting_started_getting_help.md)
-
-* [Changements non rétro-compatibles](breaking_changes.md)
-  * [30 Aout 2019](ChangeLog/20190830.md)
-
 * [FAQ](faq.md)
   * [FAQ Générale](faq_general.md)
   * [Compiler QMK](faq_build.md)

docs/fr-FR/breaking_changes.md

@@ -0,0 +1,107 @@
+# Breaking changes
+
+Ce document décrit le processus de QMK pour la gestion des breaking changes. Un breaking change est un changement qui modifie la manière dont QMK fonctionne introduisant des incompatibilités ou des comportements dangereux. Nous limitons ces changements afin que les utilisateurs n'aient pas peur de casser leurs keymaps en mettant à jour leur version de QMK.
+
+La période de breaking change est quand nous allons fusionner un PR qui change QMK d'une manière dangereuse ou inattendue. Il y a une période interne de test afin de nous assurer que les problèmes résiduels sont rares ou impossible à prévoir.
+
+## Qu'est-ce qui a été inclus dans des Breaking Changes précédents?
+
+* [30 août 2019](ChangeLog/20190830.md)
+
+## Quand va être le prochain Breaking Change?
+
+Le prochain Breaking Change est planifié pour le 29 novembre.
+
+### Dates importantes
+
+* [x] 21 septembre 2019 - `future` est créé. Il va être rebasé de manière hebdomadaire.
+* [ ] 01 novembre 2019 - `future` fermé aux nouveaux PRs.
+* [ ] 01 novembre 2019 - Appel aux testeurs.
+* [ ] 27 novembre 2019 - `master` est bloqué, pas de PRs fusionnés.
+* [ ] 29 novembre 2019 - `future` est fusionné dans `master`.
+* [ ] 30 novembre 2019 - `master` est débloqué. Les PRs peuvent à nouveau être fusionnés.
+
+## Quels changements seront inclus?
+
+Pour voir une liste de candidats de breaking changes, vous pouvez regardez la liste des [labels `breaking_change`](https://github.com/qmk/qmk_firmware/pulls?q=is%3Aopen+label%3Abreaking_change+is%3Apr). De nouveaux changements peuvent être ajoutés entre maintenant et lorsque `future` est fermée, et un PR avec ce label n'est pas garanti d'être fusionné.
+
+Si vous souhaitez que votre breaking change soit inclus dans ce tour, vous devez créer un PR avec le label `breaking_change` et faire en sorte qu'il soit accepté avant que `future` ne soit fermé. Une fois `future` fermé, aucun nouveau breaking change sera accepté.
+
+Critère d'acceptation:
+
+* Le PR est complété et prêt à fusionner
+* Le PR a un ChangeLog
+
+# Checklists
+
+Cette section documente plusieurs processus que nous utilisons en lançant le processus de Breaking Change.
+
+## Rebase `future` de `master`
+
+Ceci est lancé chaque vendredi tant que `future` est ouvert.
+
+Processus:
+
+```
+cd qmk_firmware
+git checkout master
+git pull --ff-only
+git checkout future
+git rebase master
+git push --force
+```
+
+## Créer la branche `future`
+
+Ceci est fait immédiatement après la fusion de la branche `future` précédente.
+
+* `qmk_firmware` git commands
+    * [ ] `git checkout master`
+    * [ ] `git pull --ff-only`
+    * [ ] `git checkout -b future`
+    * [ ] Modifie `readme.md`
+        * [ ] Ajoute un message en haut qui indique que c'est une branche de test.
+        * [ ] Ajoute un lien vers ce document
+    * [ ] `git commit -m 'Branch point for <DATE> Breaking Change'`
+    * [ ] `git tag breakpoint_<YYYY>_<MM>_<DD>`
+    * [ ] `git tag <next_version>` # Evite que le label point d'arrêt soit confondu par un incrément de version
+    * [ ] `git push origin future`
+    * [ ] `git push --tags`
+
+## 4 Semaines Avant la Fusion
+
+* `future` est maintenant fermé aux nouveaux PRs, seul des correctifs pour les PRs courants peuvent être mergés
+* Envoi de l'appel aux testeurs
+    * [ ] Discord
+    * [ ] GitHub PR
+    * [ ] https://reddit.com/r/olkb
+
+## 1 Semaine Avant la Fusion
+
+* Annonce que master sera fermée entre <2 jours avant> à <Jour de la fusion>
+    * [ ] Discord
+    * [ ] GitHub PR
+    * [ ] https://reddit.com/r/olkb
+
+## 2 Jours Avant la Fusion
+
+* Annonce que master est fermé pour 2 jours
+    * [ ] Discord
+    * [ ] GitHub PR
+    * [ ] https://reddit.com/r/olkb
+
+## Jour de la fusion
+
+* `qmk_firmware` git commands
+    * [ ] `git checkout future`
+    * [ ] `git pull --ff-only`
+    * [ ] `git rebase origin/master`
+    * [ ] Modifie `readme.md`
+        * [ ] Supprimer les notes à propos de `future`
+    * [ ] Regroupe ChangeLog dans un fichier.
+    * [ ] `git commit -m 'Merge point for <DATE> Breaking Change'`
+    * [ ] `git push origin future`
+* Actions sur Github
+    * [ ] Crée un PR pour `future`
+    * [ ] S'assurer que Travis ne relève aucun problème
+    * [ ] Fusion le PR `future`

docs/fr-FR/cli.md

@@ -0,0 +1,146 @@
+# La CLI de QMK
+
+Cette page décrit comment configurer et utiliser la CLI QMK.
+
+# Vue d'ensemble
+
+La CLI de QMK permet de simplifier la compilation et l'intéraction avec les clavier QMK. Nous avons définis plusieurs commandes pour simplifier et rationaliser les tâches telles qu'obtenir et compiler le firmware QMK, créer de nouvelles keymaps, et plus.
+
+* [CLI globale](#global-cli)
+* [CLI locale](#local-cli)
+* [Les commandes CLI](#cli-commands)
+
+# Pré-requis
+
+La CLI nécessite Python 3.5 ou plus récent. Nous essayons de limiter le nombre de pré-requis, mais vous allez aussi devoir installer les paquets listés dans le fichier [`requirements.txt`](https://github.com/qmk/qmk_firmware/blob/master/requirements.txt).
+
+# CLI globale
+
+QMK met à disposition une CLI installable qui peut être utilisée pour configurer votre environnement de compilation QMK, fonctionne avec QMK, et qui rend l'utilisation de plusieurs copies de `qmk_firmware` plus simple. Nous recommandons d'installer et de mettre à jour ceci régulièrement.
+
+## Installer en utilisant Homebrew (macOS, quelques Linux)
+
+Si vous avez installé [Homebrew](https://brew.sh) vous pouvez entrer ce qui suit et installer QMK:
+
+```
+brew tap qmk/qmk
+brew install qmk
+export QMK_HOME='~/qmk_firmware' # Optional, set the location for `qmk_firmware`
+qmk setup  # This will clone `qmk/qmk_firmware` and optionally set up your build environment
+```
+
+## Installer en utilisant easy_install ou pip
+
+Si votre système n'est pas listé ci-dessus, vous pouvez installer QMK manuellement. Premièrement, vérifiez que vous avez bien installé Python 3.5 (ou plus récent) et pip. Ensuite, installez QMK avec cette commande:
+
+```
+pip3 install qmk
+export QMK_HOME='~/qmk_firmware' # Optional, set the location for `qmk_firmware`
+qmk setup  # This will clone `qmk/qmk_firmware` and optionally set up your build environment
+```
+
+## Paquets pour d'autres systèmes d'exploitation
+
+Nous recherchons des gens pour créer et maintenir un paquet `qmk` pour plus de systèmes d'exploitation. Si vous voulez créer un paquet pour votre système d'exploitation, suivez ces directives:
+
+* Suivez les bonnes pratiques pour votre système d'exploitation lorsqu'elles entrent en conflit avec ces directives
+    * Documentez pourquoi dans un commentaire lorsque vous ne les suivez pas
+* Installez en utilisant un virtualenv
+* Expliquez à l'utilisateur de définir la variable d'environnement `QMK_Home` pour "check out" les sources du firmware à un autre endroit que `~/qmk_firmware`.
+
+# CLI locale
+
+Si vous ne voulez pas utiliser la CLI globale, il y a une CLI locale empaquetée avec `qmk_firmware`. Vous pouvez le trouver dans `qmk_firmware/bin/qmk`. Vous pouvez lancer la commande `qmk` depuis n'importe quel répertoire et elle fonctionnera toujours sur cette copie de `qmk_firmware`.
+
+**Exemple**:
+
+```
+$ ~/qmk_firmware/bin/qmk hello
+Ψ Hello, World!
+```
+
+## Limitations de la CLI locale
+
+Il y a quelques limitations à la CLI locale comparé à la globale:
+
+* La CLI locale ne supporte pas `qmk setup` ou `qmk clone`
+* La CLI locale n'opère pas sur le même arbre `qmk_firmware`, même si vous avez plusieurs dépôts clonés.
+* La CLI locale ne s'exécute pas dans un virtualenv, donc il y a des risques que des dépendances seront en conflit
+
+# Les commandes CLI
+
+## `qmk compile`
+
+Cette commande permet de compiler le firmware de n'importe quel répertoire. Vous pouvez compiler des exports JSON de <https://config.qmk.fm> ou compiler des keymaps du dépôt.
+
+**Utilisation pour les exports de configuration**:
+
+```
+qmk compile <configuratorExport.json>
+```
+
+**Utilisation pour les Keymaps**:
+
+```
+qmk compile -kb <keyboard_name> -km <keymap_name>
+```
+
+## `qmk cformat`
+
+Cette commande formatte le code C en utilisant clang-format. Lancez-la sans arguments pour formatter tout le code core, ou passez les noms de fichiers à la ligne de commande pour la lancer sur des fichiers spécifiques.
+
+**Utilisation**:
+
+```
+qmk cformat [file1] [file2] [...] [fileN]
+```
+
+## `qmk config`
+
+Cette commande vous permet de configurer le comportement de QMK. Pour la documentation complète de `qmk config`, regardez [Configuration de CLI](cli_configuration.md).
+
+**Utilisation**:
+
+```
+qmk config [-ro] [config_token1] [config_token2] [...] [config_tokenN]
+```
+
+## `qmk doctor`
+
+Cette commande examine votre environnement et vous alertes des potentiels problèmes de compilation ou de flash.
+
+**Utilisation**:
+
+```
+qmk doctor
+```
+
+## `qmk new-keymap`
+
+Cette commande crée une nouvelle keymap basée sur une keymap par défaut d'un clavier existant.
+
+**Utilisation**:
+
+```
+qmk new-keymap [-kb KEYBOARD] [-km KEYMAP]
+```
+
+## `qmk pyformat`
+
+Cette commande formatte le code python dans `qmk_firmware`.
+
+**Utilisation**:
+
+```
+qmk pyformat
+```
+
+## `qmk pytest`
+
+Cette commande démarre la suite de test python. Si vous faites des changements dans le code Python, assurez vous que les tests se lancent avec succès.
+
+**Utilisation**:
+
+```
+qmk pytest
+```

docs/fr-FR/cli_configuration.md

@@ -0,0 +1,121 @@
+# Configuration de QMK CLI
+
+Ce document explique comment fonctionne la commande `qmk config`.
+
+# Introduction
+
+La configuration pour QMK CLI est un système clé/valeur. Chaque clé est composée d'une sous-commande et d'un argument séparé par une virgule. Cela permet une traduction simple et directe entre les clés de configuration et l'argument qu'elle définit.
+
+## Exemple simple
+
+Comme exemple, regardons la commande `qmk compile --keyboard clueboard/66/rev4 --keymap default`.
+
+Il y a deux arguments de ligne de commande qui peuvent être lu de la configuration:
+
+* `compile.keyboard`
+* `compile.keymap`
+
+Essayons de les définir:
+
+```shell
+$ qmk config compile.keyboard=clueboard/66/rev4 compile.keymap=default
+compile.keyboard: None -> clueboard/66/rev4
+compile.keymap: None -> default
+Ψ Wrote configuration to '/Users/example/Library/Application Support/qmk/qmk.ini'
+```
+
+Maintenant, je peux lancer la commande `qmk compile` sans avoir à spécifier mon clavier et keymap à chaque fois.
+
+## Définir les options par défaut
+
+Parfois, il est utile de partager une configuration entre plusieurs commandes. Par exemple, plusieurs commandes prennent un argument `--keyboard`. Plutôt que de devoir définir cette valeur pour chaque commande, vous pouvez définir une valeur d'utilisateur qui sera utilisée par toutes les commandes qui prennent cet argument.
+
+Exemple:
+
+```
+$ qmk config user.keyboard=clueboard/66/rev4 user.keymap=default
+user.keyboard: None -> clueboard/66/rev4
+user.keymap: None -> default
+Ψ Wrote configuration to '/Users/example/Library/Application Support/qmk/qmk.ini'
+```
+
+# CLI Documentation (`qmk config`)
+
+La commande `qmk config` est utilisée pour intéragir avec la configuration sous-jacente. Lancée sans argument, elle affiche la configuration courante. Lorsque des arguments sont définis, ils sont considérés comme étant des jetons de configuration, qui sont des chaînes de caractère ne contenant aucun espace avec le format suivant:
+
+    <subcommand|general|default>[.<key>][=<value>]
+
+## Définir des valeurs de configuration
+
+Vous pouvez définir des valeurs de configuration en mettant le caractère égal (=) dans votre clé de configuration. La clé doit toujours être dans le format complet `<section>.<key>`.
+
+Exemple:
+
+```
+$ qmk config default.keymap=default
+default.keymap: None -> default
+Ψ Wrote configuration to '/Users/example/Library/Application Support/qmk/qmk.ini'
+```
+
+## Lire des valeurs de configuration
+
+Vous pouvez lire les valeurs de configuration pour la totalité de la configuration, une seule clé, ou une section entière. Vous pouvez aussi spécifier plusieurs clés pour afficher plus d'une valeur.
+
+### Exemple avec la totalité de la configuration
+
+    qmk config
+
+### Exemple avec une section entière
+
+    qmk config compile
+
+### Exemple avec une clé unique
+
+    qmk config compile.keyboard
+
+### Exemple avec plusieurs clés
+
+    qmk config user compile.keyboard compile.keymap
+
+## Supprimer des valeurs de configuration
+
+Vous pouvez supprimer une valeur de configuration en la définissant avec la chaîne spéciale `None`.
+
+Exemple:
+
+```
+$ qmk config default.keymap=None
+default.keymap: default -> None
+Ψ Wrote configuration to '/Users/example/Library/Application Support/qmk/qmk.ini'
+```
+
+## Plusieurs opérations
+
+Vous pouvez combiner plusieures opérations d'écriture et de lecture en une seule commande. Elle seront exécutées et affichées dans l'ordre:
+
+```
+$ qmk config compile default.keymap=default compile.keymap=None
+compile.keymap=skully
+compile.keyboard=clueboard/66_hotswap/gen1
+default.keymap: None -> default
+compile.keymap: skully -> None
+Ψ Wrote configuration to '/Users/example/Library/Application Support/qmk/qmk.ini'
+```
+
+# Options de configuration utilisateur
+
+| Clé | Valeur par défaut | Description |
+|-----|---------------|-------------|
+| user.keyboard | None | Le chemin d'accès vers le clavier (Exemple: `clueboard/66/rev4`) |
+| user.keymap | None | Le nom de la keymap (Exemple: `default`) |
+| user.name | None | Le nom d'utilisateur GitHub de l'utilisateur. |
+
+# Toutes les options de configuration
+
+| Clé | Valeur par défaut | Description |
+|-----|---------------|-------------|
+| compile.keyboard | None | Le chemin d'accès vers le clavier (Exemple: `clueboard/66/rev4`) |
+| compile.keymap | None | Le nom de la keymap (Exemple: `default`) |
+| hello.name | None | Le nom à saluer lorsque démarré. |
+| new_keyboard.keyboard | None | Le chemin d'accès vers le clavier (Exemple: `clueboard/66/rev4`) |
+| new_keyboard.keymap | None | Le nom de la keymap (Example: `default`) |

docs/fr-FR/contributing.md

@@ -0,0 +1,154 @@
+# Comment contribuer
+
+👍🎉 Premièrement, merci de prendre le temps de lire ceci et de contribuer! 🎉👍
+
+Les contributions de tiers nous aide à améliorer et faire grandir QMK. Nous voulons rendre les pull requests et le processus de contribution utile et simple à la fois pour les contributeurs et les mainteneurs. C'est pourquoi nous avons mis en places des directives pour les contibuteurs afin que votre pull request puisse être accepté sans changement majeur.
+
+* [Aperçu du projet](#project-overview)
+* [Conventions de codage](#coding-conventions)
+* [Directives générales](#general-guidelines)
+* [Que veut dire le code de conduite pour moi?](#what-does-the-code-of-conduct-mean-for-me)
+
+## Je ne veux pas lire tout ce pavé! J'ai juste une question!
+
+Si vous voulez poser une question sur QMK, vous pouvez le faire sur le [sous-reddit OLKB](https://reddit.com/r/olkb) ou sur [Discord](https://discord.gg/Uq7gcHh).
+
+Merci de garder ceci en tête:
+
+* Cela peut prendre plusieurs heures pour que quelqu'un réponde à votre question. Merci d'être patient!
+* Tous ceux impliqués avec QMK fait don de son temps et de son énergie. Nous ne sommes pas payés pour travailler sur ou répondre aux questions concernant QMK.
+* Essayez de poser vos questions de manière à ce qu'elles soient le plus simple à répondre possible. Si vous n'êtes pas sûrs de savoir comment faire, voici quelques bon guides (en anglais):
+  * https://opensource.com/life/16/10/how-ask-technical-questions
+  * http://www.catb.org/esr/faqs/smart-questions.html
+
+# Aperçu du projet
+
+QMK est majoritairement écrit en C, avec quelques fonctions et parties spécifiques écrites en C++. Il est destiné aux processeurs intégrés que l'on trouve dans des clavier, particulièrement AVR ([LUFA](http://www.fourwalledcubicle.com/LUFA.php)) et ARM ([ChibiOS](http://www.chibios.com)). Si vous maîtrisez déjà la programmation sur Arduino, vous trouverez beaucoup de concepts et de limitations familiers. Une expérience préalable avec les Arduino n'est pas nécessaire à contribuer avec succès à QMK.
+
+<!-- FIXME: We should include a list of resources for learning C here. -->
+
+# Où trouver de l'aide?
+
+Si vous avez besoin d'aide, vous pouvez [ouvrir une issue](https://github.com/qmk/qmk_firmware/issues) ou [un chat sur Discord](https://discord.gg/Uq7gcHh).
+
+# Comment contribuer?
+
+Vous n'avez encore jamais contribué à un projet open source? Vous vous demandez comment les contributions dans QMK fonctionnent? Voici un aperçu rapide!
+
+0. Enregistrez-vous sur [GitHub](https://github.com).
+1. Définissez une keymap à contribuer, [trouvez une issue](https://github.com/qmk/qmk_firmware/issues) que vous souhaitez corriger, ou [une fonction](https://github.com/qmk/qmk_firmware/issues?q=is%3Aopen+is%3Aissue+label%3Afeature) que vous voulez ajouter.
+2. Créez un fork sur le dépôt associé avec une issue sur votre compte GitHub. Cela veut dire que vous allez avoir une copie du dépôt sous `votre-login-GitHub/qmk_firmware`.
+3. Clonez le dépôt sur votre macine locale en utilisant `git clone https://github.com/login-github/repository-name.git`.
+4. Si vous travaillez sur une nouvelle fonctionnalité, pensez à ouvrir une issue pour parler avec nous du travail que vous souhaitez démarrer.
+5. Créez une nouvelle branche pour votre correctif en utilisant `git checkout -b nom-de-branche`.
+6. Faites les changements nécessaires pour corriger le problème ou ajouter la fonctionnalité.
+7. Utilisez `git add chemin-de-fichier` pour ajouter les contenus des fichiers modifiés au "snapshot" que git utilise pour gérer l'état du projet, appelé aussi l'index.
+8. Utilisez `git commit -m "Insérez une description courte des changements (en anglais)"` pour enregistrer le contenu de l'index avec un message descriptif.
+9. Poussez les changements vers votre dépôt sur GitHub en utilisant `git push origin nom-de-branche`.
+10. Créez un pull request sur [QMK Firmware](https://github.com/qmk/qmk_firmware/pull/new/master).
+11. Donnez un titre à votre pull request en utilisant une description courte des changements que vous avez fait et ajoutez le numéro de l'issue ou du bug associé avec votre changement. Les commentaires de PR devraient se faire en anglais de préférence. Par exemple, vous pouvez utiliser un titre tel que celui-là: "Added more log outputting to resolve #4352".
+12. Dans la description du pull request, expliquez les changements que vous avez fait et tous les problèmes qui existent, selon vous, sur le pull request que vous avez fait. Vous pouvez aussi utiliser la description pour poser des questions au mainteneur. Il n'est pas nécessaire que votre pull request soit parfait (aucun pull request ne l'est), le reviewer sera là pour vous aider à résoudre les problèmes et l'améliorer!
+13. Attendez que le pull request soit revu par un mainteneur.
+14. Faites des changements au pull request si le mainteneur le recommande.
+15. Célébrez votre succès une fois votre pull request fusionné!
+
+# Conventions de codage
+
+La grande majorité de notre style est plutôt simple à comprendre. Si vous connaissez C ou Python, vous ne devriez pas avoir trop de difficulté avec notre style.
+
+* [Conventions de codage - C](coding_conventions_c.md)
+* [Conventions de codage - Python](coding_conventions_python.md)
+
+# Directives générales
+
+Nous avons un certain nombre de type de changements dans QMK, chacun nécessitant un niveau de rigueur différent. Nous voulons que vous gardiez les directives suivantes en tête quel que soit le changement que vous êtes en train de faire.
+
+* Séparez les PR dans des unités logiques. Par exemple, ne soumettez pas un PR qui couvre deux fonctionnalités séparées, soumettez plutôt un PR pour chaque fonctionnalité.
+* Vérifiez les espaces blancs non nécessaires avec `git diff --check` avant de commit.
+* Assurez-vous que votre code compile.
+  * Keymaps: Assurez-vous que `make keyboard:your_new_keymap` ne renvoie pas d'erreur.
+  * Claviers: Assurez-vous que `make keyboard:all` ne renvoie pas d'erreur.
+  * Core: Assurez-vous que `make all` ne renvoie pas d'erreur.
+* Assurez-vous que les messages de commit soient compréhensibles d'eux-même. Vous devriez écrire une description simple (pas plus de 70 caractères) sur la première ligne, suivi d'une ligne vide, suivi d'un détail de votre commit, si nécessaire. Exemple:
+
+```
+Adjust the fronzlebop for the kerpleplork
+
+The kerpleplork was intermittently failing with error code 23. The root cause was the fronzlebop setting, which causes the kerpleplork to activate every N iterations.
+
+Limited experimentation on the devices I have available shows that 7 is high enough to avoid confusing the kerpleplork, but I'd like to get some feedback from people with ARM devices to be sure.
+```
+
+## Documentation
+
+La documentation est l'une des manière les plus simples de démarrer la contribution sur QMK. Il est simple de trouver des endroits où la documentation est fausse ou incomplète, et il est tout aussi simple de la corriger! Nous avons aussi grandement besoin de quelqu'un pour éditer notre documentation, donc si vous avez des compétences en édition mais que vous n'êtes pas sûr de savoir où aller, n'hésitez pas [demandez de l'aide](#where-can-i-go-for-help)!
+
+Vous trouverez toute notre documentation dans le répertoire `qmk_firmware/docs`, ou si vous préférez utiliser des outils web, vous pouvez cliquer sur le bouton "Suggest An Edit" en haut de chaque page sur http://docs.qmk.fm/.
+
+Lorsque vous donnez des exemples de code dans la documentation, essayez de suivre les conventions de nommage utilisées ailleurs dnas la documentation. Par exemple, standardisez les enums en utilisant `my_layers` ou `my_keycodes` afin de garder une consistance:
+
+```c
+enum my_layers {
+  _FIRST_LAYER,
+  _SECOND_LAYER
+};
+
+enum my_keycodes {
+  FIRST_LAYER = SAFE_RANGE,
+  SECOND_LAYER
+};
+```
+
+## Keymaps
+
+La plupart des contributeurs débutants démarrent avec leurs keymaps personnelles. Nous essayons de garder les standards pour les keymaps pluôt simple (les keymaps reflètent, après tout, la personnalité de leurs créateurs) mais nous demandons que vous suiviez les directives suivantes afin que d'autres puissent découvrir et apprendre de votre keymap.
+
+* Ecrivez un fichier `readme.md` en utilisant [la template](documentation_templates.md).
+* Tous les PR de keymaps doivent être "squashés", donc si la manière dont vos commits sont squashés vous est important, vous devez le faire vous-même.
+* Ne regroupez pas des fonctionnalités avec votre PR de keymap. Envoyez d'abord votre fonctionnalité, puis créez un second PR pour la keymap.
+* N'incluez pas de fichier `Makefile` dans votre dossier de keymap (ils ne sont plus utilisés)
+* Mettez à jour les copyrights dans les en-têtes de fichiers (cherchez `%YOUR_NAME%`)
+
+## Claviers
+
+Les claviers sont la raison d'être de QMK. Certains claviers sont maintenus par la communauté, alors que d'autre sont maintenus par les gens responsables de la création du clavier. Le fichier `readme.md` devrait vous informer de qui maintient le clavier. Si vous avez des questions concernant un clavier en particulier, vous pouvez [Ouvrir une issue](https://github.com/qmk/qmk_firmware/issues) et tagger le mainteneur dans votre question.
+
+Nous vous demandons aussi que vous suiviez ces directives:
+
+* Ecrivez un fichier `readme.md` en utilisant [le template](documentation_templates.md).
+* Gardez un nombre de commits raisonnable, ou nous squasherons votre PR.
+* Ne regroupez pas des fonctionnalités avec le PR pour votre clavier. Envoyez d'abord votre fonctionnalité, puis créez un second PR pour le clavier.
+* Appelez les fichiers `.c`/`.h` du nom du dossier parent, par exemple `/keyboards/<kb1>/<kb2>/<kb2>.[ch]`
+* N'incluez pas de fichier `Makefile` dans votre dossier de keymap (ils ne sont plus utilisés)
+* Mettez à jour les copyrights dans les en-têtes de fichiers (cherchez `%YOUR_NAME%`)
+
+## Quantum/TMK Core
+
+Faites attention d'être sûr d'implémenter votre nouvelle fonctionnalité de la meilleure manière qu'il soit avant d'investir beaucoup de travail à son développement. Vous pouvez apprendre les bases de QMK en lisant [Comprendre QMK](understanding_qmk.md), qui vous donnera une idée du flux du programme QMK. A partir de là, parlez nous afin de définir la meilleure façon d'implémenter votre idée. Il y a deux façons principale de le faire:
+
+* [Chat sur Discord](https://discord.gg/Uq7gcHh)
+* [Ouvrir une Issue](https://github.com/qmk/qmk_firmware/issues/new)
+
+Les PR de nouvelles fonctionnalités de de correction de bug affectent tous les claviers. Nous sommes aussi dans un processus de restructuration de QMK. Pour cette raison, il est absolument nécessaire que tout changement important ou significatif soit discuté avant que l'implémentation soit faite. Si vous ouvrez un PR sans nous avoir parlé, préparez vous à faire des refontes significatives si vous changements ne sont pas compatibles avec ce que nous avons planifié.
+
+Voici quelques choses à garder en tête lorsque vous travaillez sur une fonctionnalité ou un bug fix.
+
+* **Désactivé par défaut** - la mémoire est plutôt limitée sur la plupart des puces que QMK supporte, et il est important que les keymaps courantes ne soient pas cassées. S'il vous plaît faites que vos features doivent être **activées** plutôt que désactivées. Si vous pensez qu'elle devrait être activée par défaut, ou que cela réduit la taille du code, parlez-nous en.
+* **Compilez localement avant de soumettre** - Cela devrait aller sans dire, mais votre code doit compiler! Notre système Travis devrait relever les problèmes, mais il est généralement plus rapide de compiler quelques claviers en local plutôt que d'attendre le retour des résultats
+* **Faites attention aux révisions et différentes bases de puces** - beaucoup de claviers ont des révisions qui permettent des changements de configuration mineurs, voir des bases de chip différentes. Essayez de faire que votre fonctionnalité soit supportée à la fois sur ARM et AVR, ou désactivez-là automatiquement sur les plateformes non supportées.
+* **Expliquez votre fonctionnalité** - Documentez-là dans `docs/`, soit dans un nouveau fichier, ou dans une partie d'un fichier existant. Si vous ne la documentez pas, personne ne pourra bénéficier de votre dur labeur.
+
+Nous vous demandons aussi de suivre ces ces directives:
+
+* Gardez un nombre de commits raisonnable, ou nous squasherons votre PR.
+* Ne regroupez pas des claviers ou des keymaps avec des changements core. Soumettez vos changements core en premier.
+* Ecrivez des [Tests Unitaires](unit_testing.md) pour votre fonctionnalité.
+* Suivez le style du fichier que vous modifiez. Si le style n'est pas clair ou qu'il y a un mélange de fichiers, vous devriez vous conformer aux [conventions de codage](#coding-conventions) au dessus.
+
+## Refactoriser
+
+Afin de maintenir une vision claire sur comment les choses sont architectuées dans QMK, nous essayons de planifier des refactorisations en profondeur et qu'un collaborateur fasse le changement. Si vous avez une idée de refactorisation, ou une suggestion, [ouvrez une issue] [open an issue](https://github.com/qmk/qmk_firmware/issues), nous adorons discuter de comment améliorer QMK.
+
+# Que veut dire le code de conduite pour moi?
+
+Note [Code De Conduite](https://github.com/qmk/qmk_firmware/blob/master/CODE_OF_CONDUCT.md) veut dire que vous avez la responsabilité de traiter tout le monde dans le projet avec respect et courtoisie, peut importe leur identité. Si vous êtes victime d'une attitude ou de commentaires inapropriés, tels que décrit dans notre Code de Conduite, nous sommes là pour vous et nous ferons de notre mieux pour nous assurer que le fautif soit réprimandé, tel que décrit dans notre code.

docs/fr-FR/getting_started_getting_help.md

@@ -0,0 +1,15 @@
+# Trouver de l'aide
+
+Il y a beaucoup de ressources pour trouver de l'aide avec QMK.
+
+## Chat temps-réel
+
+Vous trouverez des développeurs QMK et des utilisateurs sur notre [Serveur Discord](https://discord.gg/Uq7gcHh) principal. Il y a des canaux spécifiques dans le serveurs pour discuter des firmware, toolbox, hardware et configurateurs.
+
+## Sous-Reddit OLKB
+
+Le forum officiel de QMK est [/r/olkb](https://reddit.com/r/olkb) sur [reddit.com](https://reddit.com).
+
+## Tickets GitHub
+
+Vous pouvez ouvrir un [ticket sur GitHub](https://github.com/qmk/qmk_firmware/issues). Ceci est spécialement pratique lorsque votre problème demande une discussion long terme ou un débugage.

docs/fr-FR/getting_started_github.md

@@ -0,0 +1,61 @@
+# Comment utiliser GitHub avec QMK
+
+GitHub peut être un peu compliqué pour ceux qui n'y sont pas familier. Ce guide va vous expliquer chaque étape de "fork", clone et envoi d'un pull request avec QMK.
+
+?> Ce guide part du principe que vous êtes suffisamment à l'aise pour envoyer commandes sur la ligne de commande et que vous avez Git installé sur votre système.
+
+Commencez par la [page GitHub de QMK](https://github.com/qmk/qmk_firmware), et vous verrez un bouton dans le coin en haut à droite qui indique "Fork":
+
+![Fork on Github](http://i.imgur.com/8Toomz4.jpg)
+
+Si vous faites partie d'une organisation, vous aurez besoin de savoir quel compte utiliser pour le fork. Dans la plupart des cas, vous voudrez créer le fork dans votre compte personnel. Une fois le fork complet (cela peut quelque fois prendre un peu de temps), appuyez sur le bouton "Clone or download":
+
+![Download from Github](http://i.imgur.com/N1NYcSz.jpg)
+
+Faites attention à sélectionner "HTTPS", et sélectionnez le liens et copiez-le:
+
+![HTTPS link](http://i.imgur.com/eGO0ohO.jpg)
+
+Ensuite, entrez `git clone` dans la ligne de commande, et collez votre lien:
+
+```
+user@computer:~$ git clone https://github.com/whoeveryouare/qmk_firmware.git
+Cloning into 'qmk_firmware'...
+remote: Counting objects: 46625, done.
+remote: Compressing objects: 100% (2/2), done.
+remote: Total 46625 (delta 0), reused 0 (delta 0), pack-reused 46623
+Receiving objects: 100% (46625/46625), 84.47 MiB | 3.14 MiB/s, done.
+Resolving deltas: 100% (29362/29362), done.
+Checking out files: 100% (2799/2799), done.
+```
+
+Vous avez maintenant votre fork QMK sur votre machine locale, vous pouvez ajouter votre keymap, la compiler et la flasher sur votre board. Une fois heureux avec vos changements, vous pouvez les ajouter, commit, et pousser vers votre fork comme suit:
+
+```
+user@computer:~$ git add .
+user@computer:~$ git commit -m "adding my keymap"
+[master cccb1608] adding my keymap
+ 1 file changed, 1 insertion(+)
+ create mode 100644 keyboards/planck/keymaps/mine/keymap.c
+user@computer:~$ git push
+Counting objects: 1, done.
+Delta compression using up to 4 threads.
+Compressing objects: 100% (1/1), done.
+Writing objects: 100% (1/1), 1.64 KiB | 0 bytes/s, done.
+Total 1 (delta 1), reused 0 (delta 0)
+remote: Resolving deltas: 100% (1/1), completed with 1 local objects.
+To https://github.com/whoeveryouare/qmk_firmware.git
+ + 20043e64...7da94ac5 master -> master
+```
+
+Vos changements existent maintenant dans votre fork sur GitHub. Si vous allez à cete adresse (`https://github.com/<whoeveryouare>/qmk_firmware`), vous pouvez créer un nouveau "Pull Request" en cliquant sur ce bouton:
+
+![New Pull Request](http://i.imgur.com/DxMHpJ8.jpg)
+
+Maintenant, vous pourrez voir exactement ce que vous avez commité. Si ça vous semble bien, vous pouvez le finaliser en cliquant sur "Create Pull Request":
+
+![Create Pull Request](http://i.imgur.com/Ojydlaj.jpg)
+
+Une fois transmis, nous pourrons vous parler de vos changements, vous demander de faire des changements, et éventuellement de les accepter!
+
+Merci de contribuer à QMK :)

docs/fr-FR/getting_started_introduction.md

@@ -0,0 +1,62 @@
+# Introduction
+
+Le but de cette page est d'expliquer les informations de base qui vous serons nécessaire pour travailler sur le projet QMK. Il a pour pré-requis que vous soyez familier à la navigation à l'aide d'un shell Unix, mais ne s'attend pas à ce que vous soyez familier avec C ou la compilation en utilisant make.
+
+## Structure de base de QMK
+
+QMK est un fork du projet [tmk_keyboard](https://github.com/tmk/tmk_keyboard) créé par [Jun Wako](https://github.com/tmk). Le code originel de TMK, avec quelques modifications, se trouve dans le dossier `tmk`. Les additions que QMK amène au projet se trouvent dans le dossier `quantum`. Les projets de clavier se trouvent dans les dossiers `handwired` et `keyboard`.
+
+### Structure du Userspace
+
+Dans le dossier `users` se trouve un répertoire pour chaque utilisateur. C'est un endroit où les utilisateurs peuvent mettre du code qui serait partagé entre plusieurs claviers. Merci de lire la documentation  [Fonctionnalité Userspace](feature_userspace.md) pour plus d'information.
+
+### Structure du projet clavier
+
+Dans le dossier `keyboards`, son sous-dossier `handwired` et ses sous-dossiers pour les revendeurs et fabriquants (par exemple `clueboard`) se trouve un répertoire pour chaque projet clavier. Par exemple `qmk_firmware/keyboards/clueboard/2x1800`.
+
+A l'intérieur, vous trouverez la structure suivante:
+
+* `keymaps/`: différentes keymaps qui peuvent être compilées
+* `rules.mk`: Ce fichier définit les options "make" par défaut. Ne modifiez pas ce fichier directement, utilisez à la place un `rules.mk` spécifique à la keymap.
+* `config.h`: Ce fichier définit les options de compilation par défaut. Ne modifiez pas ce fichier directement, utilisez à la place un `config.h` spécifique à la keymap.
+* `info.json`: Le fichier utilisé pour définir les options de layout de QMK Configurator. Voyez [Support Configurator](reference_configurator_support.md) pour plus d'information.
+* `readme.md`: une brève description du clavier.
+* `<keyboardName>.h`: Ce fichier définit le layout du fichier par rapport à la matrice de commutation.
+* `<keyboardName>.c`: Ce fichier définit du code custom pour le clavier.
+
+Pour plus d'information sur la structure du projet, voyez [Directives clavier QMK](hardware_keyboard_guidelines.md).
+
+### Structure d'une Keymap
+
+Dans chaque dossier keymap, vous allez trouver les fichiers suivants. Seul le fichier `keymap.c` est nécessaire, et si le reste des fichiers n'existent pas, les options par défaut seront choisies.
+
+* `config.h`: les options de configuration de votre keymap
+* `keymap.c`: tout le code de votre keymap, requis
+* `rules.mk`: les features de QMK qui sont activées
+* `readme.md`: une description de votre keymap, comment d'autres l'utiliseront, et des explications des fonctionnalités. Uploadez les images vers un service comme imgur.
+
+# Le fichier `config.h`
+
+Le fichier `config.h` peut être mis à 3 endroits:
+
+* keyboard (`/keyboards/<keyboard>/config.h`)
+* userspace (`/users/<user>/config.h`)
+* keymap (`/keyboards/<keyboard>/keymaps/<keymap>/config.h`)
+
+Le système de compilation cherche automatiquement les fichiers de configuration dans l'ordre au dessus. Si vous souhaitez surcharger une configuration définie par un `config.h` précédent, vous devrez d'abord ajouter le code suivant.
+
+```
+#pragma once
+```
+
+Ensuite, pour surcharger l'option du fichier `config.h` précédent, vous devez `#undef` puis `#define` l'option à nouveau.
+
+Voici à quoi l'ensemble du code resemble une fois regroupé:
+
+```
+#pragma once
+
+// overrides go here!
+#undef MY_SETTING
+#define MY_SETTING 4
+```

docs/newbs_flashing.md

@@ -12,23 +12,31 @@ However, the QMK Toolbox is only available for Windows and macOS currently.  If
 
 Begin by opening the QMK Toolbox application. You'll want to locate the firmware file in Finder or Explorer. Your keyboard firmware may be in one of two formats- `.hex` or `.bin`. QMK tries to copy the appropriate one for your keyboard into the root `qmk_firmware` directory.
 
-?> If you are on Windows or macOS there are commands you can use to easily open the current firmware folder in Explorer or Finder.
+If you are on Windows or macOS there are commands you can use to easily open the current firmware folder in Explorer or Finder.
 
-?> Windows:
+#### Windows
 
-    start .
+```
+start .
+```
 
-?> macOS:
+#### macOS
 
-    open .
+```
+open .
+```
 
 The firmware file always follows this naming format:
 
-    <keyboard_name>_<keymap_name>.{bin,hex}
+```
+<keyboard_name>_<keymap_name>.{bin,hex}
+```
 
-For example, the `plank/rev5` with a `default` keymap will have this filename:
+For example, the `planck/rev5` with a `default` keymap will have this filename:
 
-    planck_rev5_default.hex
+```
+planck_rev5_default.hex
+```
 
 Once you have located your firmware file drag it into the "Local file" box in QMK Toolbox, or click "Open" and navigate to where your firmware file is stored. 
 

drivers/arm/i2c_master.c

@@ -32,27 +32,17 @@
 
 static uint8_t i2c_address;
 
-// ChibiOS uses two initialization structure for v1 and v2/v3 i2c APIs.
-// The F1 series uses the v1 api, which have to initialized this way.
-#ifdef STM32F103xB
-static const I2CConfig i2cconfig = {
-  OPMODE_I2C,
-  400000,
-  FAST_DUTY_CYCLE_2,
-};
-#else
-// This configures the I2C clock to 400khz assuming a 72Mhz clock
-// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
 static const I2CConfig i2cconfig = {
 #ifdef USE_I2CV1
     I2C1_OPMODE,
     I2C1_CLOCK_SPEED,
     I2C1_DUTY_CYCLE,
 #else
+    // This configures the I2C clock to 400khz assuming a 72Mhz clock
+    // For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
     STM32_TIMINGR_PRESC(I2C1_TIMINGR_PRESC) | STM32_TIMINGR_SCLDEL(I2C1_TIMINGR_SCLDEL) | STM32_TIMINGR_SDADEL(I2C1_TIMINGR_SDADEL) | STM32_TIMINGR_SCLH(I2C1_TIMINGR_SCLH) | STM32_TIMINGR_SCLL(I2C1_TIMINGR_SCLL), 0, 0
 #endif
 };
-#endif
 
 static i2c_status_t chibios_to_qmk(const msg_t* status) {
     switch (*status) {

keyboards/aeboards/aegis/config.h

@@ -47,8 +47,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-//#define WT_MONO_BACKLIGHT
-
 #define DYNAMIC_KEYMAP_LAYER_COUNT 4
 
 // EEPROM usage

keyboards/aeboards/ext65/config.h

@@ -47,8 +47,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-//#define WT_MONO_BACKLIGHT
-
 #define DYNAMIC_KEYMAP_LAYER_COUNT 4
 
 // EEPROM usage

keyboards/angel17/alpha/rules.mk

@@ -1,27 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/angel17/rev1/rules.mk

@@ -1,27 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/bm43a/bm43a.c

@@ -0,0 +1,51 @@
+/* Copyright 2019 mechmerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "bm43a.h"
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+/*
+
+void matrix_init_kb(void) {
+  // put your keyboard start-up code here
+  // runs once when the firmware starts up
+
+  matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+  // put your looping keyboard code here
+  // runs every cycle (a lot)
+
+  matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+  // put your per-action keyboard code here
+  // runs for every action, just before processing by the firmware
+
+  return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+  led_set_user(usb_led);
+}
+
+*/

keyboards/bm43a/bm43a.h

@@ -0,0 +1,30 @@
+/* Copyright 2019 mechmerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B,   \
+    K10,  K11, K12, K13, K14, K15, K16, K17, K18, K19, K1B,       \
+    K20,      K21, K22, K23, K24, K25, K26, K27, K28, K29, K2B,   \
+    K30, K31, K32, K33,         K35,        K37, K38, K39, K3B    \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B   }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   KC_NO, K1B   }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   KC_NO, K2B   }, \
+    { K30,   K31,   K32,   K33,   KC_NO, K35,   KC_NO, K37,   K38,   K39,   KC_NO, K3B   }, \
+}

keyboards/bm43a/config.h

@@ -0,0 +1,73 @@
+/*
+Copyright 2019 mechmerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    KPRepublic
+#define PRODUCT         BM43A
+#define DESCRIPTION     A QMK-powered custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { D1, F4, F1, F0 }
+#define MATRIX_COL_PINS { B0, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4 }
+
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 5
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+    #define RGBLED_NUM 10
+    #define RGBLIGHT_HUE_STEP 8
+    #define RGBLIGHT_SAT_STEP 8
+    #define RGBLIGHT_VAL_STEP 8
+    #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+    #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+    #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//     #define RGBLIGHT_EFFECT_BREATHING
+//     #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//     #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//     #define RGBLIGHT_EFFECT_SNAKE
+//     #define RGBLIGHT_EFFECT_KNIGHT
+//     #define RGBLIGHT_EFFECT_CHRISTMAS
+//     #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//     #define RGBLIGHT_EFFECT_RGB_TEST
+//     #define RGBLIGHT_EFFECT_ALTERNATING
+#endif

keyboards/bm43a/info.json

@@ -0,0 +1,58 @@
+{
+    "keyboard_name": "BM43A",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 12,
+    "height": 4,
+    "layouts": {
+        "LAYOUT": {
+            "key_count": 43,
+            "layout": [
+                {"label":"K00 (D1,B0)", "x":0, "y":0},
+                {"label":"K01 (D1,F5)", "x":1, "y":0},
+                {"label":"K02 (D1,F6)", "x":2, "y":0},
+                {"label":"K03 (D1,F7)", "x":3, "y":0},
+                {"label":"K04 (D1,C7)", "x":4, "y":0},
+                {"label":"K05 (D1,C6)", "x":5, "y":0},
+                {"label":"K06 (D1,B6)", "x":6, "y":0},
+                {"label":"K07 (D1,B5)", "x":7, "y":0},
+                {"label":"K08 (D1,B4)", "x":8, "y":0},
+                {"label":"K09 (D1,D7)", "x":9, "y":0},
+                {"label":"K0A (D1,D6)", "x":10, "y":0},
+                {"label":"K0B (D1,D4)", "x":11, "y":0},
+                {"label":"K10 (F4,B0)", "x":0, "y":1, "w":1.25},
+                {"label":"K11 (F4,F5)", "x":1.25, "y":1},
+                {"label":"K12 (F4,F6)", "x":2.25, "y":1},
+                {"label":"K13 (F4,F7)", "x":3.25, "y":1},
+                {"label":"K14 (F4,C7)", "x":4.25, "y":1},
+                {"label":"K15 (F4,C6)", "x":5.25, "y":1},
+                {"label":"K16 (F4,B6)", "x":6.25, "y":1},
+                {"label":"K17 (F4,B5)", "x":7.25, "y":1},
+                {"label":"K18 (F4,B4)", "x":8.25, "y":1},
+                {"label":"K19 (F4,D7)", "x":9.25, "y":1},
+                {"label":"K1B (F4,D4)", "x":10.25, "y":1, "w":1.75},
+                {"label":"K20 (F1,B0)", "x":0, "y":2, "w":2},
+                {"label":"K21 (F1,F5)", "x":2, "y":2},
+                {"label":"K22 (F1,F6)", "x":3, "y":2},
+                {"label":"K23 (F1,F7)", "x":4, "y":2},
+                {"label":"K24 (F1,C7)", "x":5, "y":2},
+                {"label":"K25 (F1,C6)", "x":6, "y":2},
+                {"label":"K26 (F1,B6)", "x":7, "y":2},
+                {"label":"K27 (F1,B5)", "x":8, "y":2},
+                {"label":"K28 (F1,B4)", "x":9, "y":2},
+                {"label":"K29 (F1,D7)", "x":10, "y":2},
+                {"label":"K2B (F1,D4)", "x":11, "y":2},
+                {"label":"K30 (F0,B0)", "x":0, "y":3},
+                {"label":"K31 (F0,F5)", "x":1, "y":3},
+                {"label":"K32 (F0,F6)", "x":2, "y":3},
+                {"label":"K33 (F0,F7)", "x":3, "y":3, "w":2.75},
+                {"label":"K35 (F0,C6)", "x":5.75, "y":3, "w":2.25},
+                {"label":"K37 (F0,B5)", "x":8, "y":3},
+                {"label":"K38 (F0,B4)", "x":9, "y":3},
+                {"label":"K39 (F0,D7)", "x":10, "y":3},
+                {"label":"K3B (F0,D4)", "x":11, "y":3}
+            ]
+        }
+    }
+    ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/"
+}

keyboards/bm43a/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 mechmerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/bm43a/keymaps/default/keymap.c

@@ -0,0 +1,33 @@
+/* Copyright 2019 mechmerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+        KC_TAB,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_ENT,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_UP,   KC_DOT,
+        KC_LCTL, KC_LGUI, KC_LALT, KC_SPC,                 KC_SPC,              MO(1),   KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [1] = LAYOUT(
+        RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______,   BL_TOGG, BL_DEC,  BL_INC,  BL_STEP, _______, _______, _______, _______, _______, _______,
+        _______,          RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______,
+        _______, _______, _______, _______,                _______,             _______, _______, _______, _______
+    ),
+
+};
+

keyboards/bm43a/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for bm43a

keyboards/bm43a/readme.md

@@ -0,0 +1,16 @@
+# bm43a
+
+A 40% mechanical keyboard.  
+
+This firmware was originally taken from a kbfirmware.json and converted through [kbf_qmk_converter](https://noroadsleft.github.io/kbf_qmk_converter/). You may find the original `.json` files [here](https://drive.google.com/drive/folders/11DowBYrFN_uCNa9Q9bXwuMn91vmZYBcG).  
+
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
+Hardware Supported: bm43a PCB    
+Hardware Availability: [KPRepublic](https://kprepublic.com/products/bm43a-bm43-43-keys-40-custom-mechanical-keyboard-pcb-programmed-numpad-layouts-qmk-firmware-with-rgb-bottom-underglow-alps-mx)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make bm43a:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/bm43a/rules.mk

@@ -0,0 +1,33 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

keyboards/cannonkeys/satisfaction75/prototype/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "Satisfaction75 prototype", 
+    "url": "", 
+    "maintainer": "Cannon Keys", 
+    "width": 16.5, 
+    "height": 6.5, 
+    "layouts": {
+        "LAYOUT_default": {
+            "layout": [{"x":0, "y":0}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.75, "y":0}, {"x":6.75, "y":0}, {"x":7.75, "y":0}, {"x":8.75, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":0, "y":1.25}, {"x":1, "y":1.25}, {"x":2, "y":1.25}, {"x":3, "y":1.25}, {"x":4, "y":1.25}, {"x":5, "y":1.25}, {"x":6, "y":1.25}, {"x":7, "y":1.25}, {"x":8, "y":1.25}, {"x":9, "y":1.25}, {"x":10, "y":1.25}, {"x":11, "y":1.25}, {"x":12, "y":1.25}, {"x":13, "y":1.25, "w":2}, {"x":15.5, "y":1}, {"x":0, "y":2.25, "w":1.5}, {"x":1.5, "y":2.25}, {"x":2.5, "y":2.25}, {"x":3.5, "y":2.25}, {"x":4.5, "y":2.25}, {"x":5.5, "y":2.25}, {"x":6.5, "y":2.25}, {"x":7.5, "y":2.25}, {"x":8.5, "y":2.25}, {"x":9.5, "y":2.25}, {"x":10.5, "y":2.25}, {"x":11.5, "y":2.25}, {"x":12.5, "y":2.25}, {"x":13.5, "y":2.25, "w":1.5}, {"x":15.5, "y":2.25}, {"x":0, "y":3.25, "w":1.75}, {"x":1.75, "y":3.25}, {"x":2.75, "y":3.25}, {"x":3.75, "y":3.25}, {"x":4.75, "y":3.25}, {"x":5.75, "y":3.25}, {"x":6.75, "y":3.25}, {"x":7.75, "y":3.25}, {"x":8.75, "y":3.25}, {"x":9.75, "y":3.25}, {"x":10.75, "y":3.25}, {"x":11.75, "y":3.25}, {"x":12.75, "y":3.25, "w":2.25}, {"x":15.5, "y":3.25}, {"x":0, "y":4.25, "w":2.25}, {"x":2.25, "y":4.25}, {"x":3.25, "y":4.25}, {"x":4.25, "y":4.25}, {"x":5.25, "y":4.25}, {"x":6.25, "y":4.25}, {"x":7.25, "y":4.25}, {"x":8.25, "y":4.25}, {"x":9.25, "y":4.25}, {"x":10.25, "y":4.25}, {"x":11.25, "y":4.25}, {"x":12.25, "y":4.25, "w":1.75}, {"x":14.25, "y":4.5}, {"x":15.5, "y":4.25}, {"x":0, "y":5.25, "w":1.25}, {"x":1.25, "y":5.25, "w":1.25}, {"x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"x":10, "y":5.25}, {"x":11, "y":5.25}, {"x":12, "y":5.25}, {"x":13.25, "y":5.5}, {"x":14.25, "y":5.5}, {"x":15.25, "y":5.5}]
+        }
+    }
+}

keyboards/cannonkeys/satisfaction75/rev1/info.json

@@ -0,0 +1,32 @@
+{
+    "keyboard_name": "Satisfaction75 rev1", 
+    "url": "", 
+    "maintainer": "Cannon Keys", 
+    "width": 16.5, 
+    "height": 6.5, 
+    "layouts": {
+        "LAYOUT_default": {
+            "layout": [{"x":0, "y":0}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.75, "y":0}, {"x":6.75, "y":0}, {"x":7.75, "y":0}, {"x":8.75, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":0, "y":1.25}, {"x":1, "y":1.25}, {"x":2, "y":1.25}, {"x":3, "y":1.25}, {"x":4, "y":1.25}, {"x":5, "y":1.25}, {"x":6, "y":1.25}, {"x":7, "y":1.25}, {"x":8, "y":1.25}, {"x":9, "y":1.25}, {"x":10, "y":1.25}, {"x":11, "y":1.25}, {"x":12, "y":1.25}, {"x":13, "y":1.25, "w":2}, {"x":15.5, "y":1}, {"x":0, "y":2.25, "w":1.5}, {"x":1.5, "y":2.25}, {"x":2.5, "y":2.25}, {"x":3.5, "y":2.25}, {"x":4.5, "y":2.25}, {"x":5.5, "y":2.25}, {"x":6.5, "y":2.25}, {"x":7.5, "y":2.25}, {"x":8.5, "y":2.25}, {"x":9.5, "y":2.25}, {"x":10.5, "y":2.25}, {"x":11.5, "y":2.25}, {"x":12.5, "y":2.25}, {"x":13.5, "y":2.25, "w":1.5}, {"x":15.5, "y":2.25}, {"x":0, "y":3.25, "w":1.75}, {"x":1.75, "y":3.25}, {"x":2.75, "y":3.25}, {"x":3.75, "y":3.25}, {"x":4.75, "y":3.25}, {"x":5.75, "y":3.25}, {"x":6.75, "y":3.25}, {"x":7.75, "y":3.25}, {"x":8.75, "y":3.25}, {"x":9.75, "y":3.25}, {"x":10.75, "y":3.25}, {"x":11.75, "y":3.25}, {"x":12.75, "y":3.25, "w":2.25}, {"x":15.5, "y":3.25}, {"x":0, "y":4.25, "w":2.25}, {"x":2.25, "y":4.25}, {"x":3.25, "y":4.25}, {"x":4.25, "y":4.25}, {"x":5.25, "y":4.25}, {"x":6.25, "y":4.25}, {"x":7.25, "y":4.25}, {"x":8.25, "y":4.25}, {"x":9.25, "y":4.25}, {"x":10.25, "y":4.25}, {"x":11.25, "y":4.25}, {"x":12.25, "y":4.25, "w":1.75}, {"x":14.25, "y":4.5}, {"x":15.5, "y":4.25}, {"x":0, "y":5.25, "w":1.25}, {"x":1.25, "y":5.25, "w":1.25}, {"x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"x":10, "y":5.25}, {"x":11, "y":5.25}, {"x":12, "y":5.25}, {"x":13.25, "y":5.5}, {"x":14.25, "y":5.5}, {"x":15.25, "y":5.5}]
+        },
+
+        "LAYOUT_iso": {
+            "layout": [{"x":0, "y":0}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.75, "y":0}, {"x":6.75, "y":0}, {"x":7.75, "y":0}, {"x":8.75, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":0, "y":1.25}, {"x":1, "y":1.25}, {"x":2, "y":1.25}, {"x":3, "y":1.25}, {"x":4, "y":1.25}, {"x":5, "y":1.25}, {"x":6, "y":1.25}, {"x":7, "y":1.25}, {"x":8, "y":1.25}, {"x":9, "y":1.25}, {"x":10, "y":1.25}, {"x":11, "y":1.25}, {"x":12, "y":1.25}, {"x":13, "y":1.25, "w":2}, {"x":15.5, "y":1}, {"x":0, "y":2.25, "w":1.5}, {"x":1.5, "y":2.25}, {"x":2.5, "y":2.25}, {"x":3.5, "y":2.25}, {"x":4.5, "y":2.25}, {"x":5.5, "y":2.25}, {"x":6.5, "y":2.25}, {"x":7.5, "y":2.25}, {"x":8.5, "y":2.25}, {"x":9.5, "y":2.25}, {"x":10.5, "y":2.25}, {"x":11.5, "y":2.25}, {"x":12.5, "y":2.25}, {"x":15.5, "y":2.25}, {"x":0, "y":3.25, "w":1.75}, {"x":1.75, "y":3.25}, {"x":2.75, "y":3.25}, {"x":3.75, "y":3.25}, {"x":4.75, "y":3.25}, {"x":5.75, "y":3.25}, {"x":6.75, "y":3.25}, {"x":7.75, "y":3.25}, {"x":8.75, "y":3.25}, {"x":9.75, "y":3.25}, {"x":10.75, "y":3.25}, {"x":11.75, "y":3.25}, {"x":12.75, "y":3.25}, {"x":13.75, "y":2.25, "w":1.25, "h":2}, {"x":15.5, "y":3.25}, {"x":0, "y":4.25, "w":1.25}, {"x":1.25, "y":4.25}, {"x":2.25, "y":4.25}, {"x":3.25, "y":4.25}, {"x":4.25, "y":4.25}, {"x":5.25, "y":4.25}, {"x":6.25, "y":4.25}, {"x":7.25, "y":4.25}, {"x":8.25, "y":4.25}, {"x":9.25, "y":4.25}, {"x":10.25, "y":4.25}, {"x":11.25, "y":4.25}, {"x":12.25, "y":4.25, "w":1.75}, {"x":14.25, "y":4.5}, {"x":15.5, "y":4.25}, {"x":0, "y":5.25, "w":1.25}, {"x":1.25, "y":5.25, "w":1.25}, {"x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"x":10, "y":5.25}, {"x":11, "y":5.25}, {"x":12, "y":5.25}, {"x":13.25, "y":5.5}, {"x":14.25, "y":5.5}, {"x":15.25, "y":5.5}]
+        },
+
+        "LAYOUT_3x2": {
+            "layout": [{"x":0, "y":0}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.75, "y":0}, {"x":6.75, "y":0}, {"x":7.75, "y":0}, {"x":8.75, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":0, "y":1.25}, {"x":1, "y":1.25}, {"x":2, "y":1.25}, {"x":3, "y":1.25}, {"x":4, "y":1.25}, {"x":5, "y":1.25}, {"x":6, "y":1.25}, {"x":7, "y":1.25}, {"x":8, "y":1.25}, {"x":9, "y":1.25}, {"x":10, "y":1.25}, {"x":11, "y":1.25}, {"x":12, "y":1.25}, {"x":13, "y":1.25, "w":2}, {"x":15.5, "y":1}, {"x":0, "y":2.25, "w":1.5}, {"x":1.5, "y":2.25}, {"x":2.5, "y":2.25}, {"x":3.5, "y":2.25}, {"x":4.5, "y":2.25}, {"x":5.5, "y":2.25}, {"x":6.5, "y":2.25}, {"x":7.5, "y":2.25}, {"x":8.5, "y":2.25}, {"x":9.5, "y":2.25}, {"x":10.5, "y":2.25}, {"x":11.5, "y":2.25}, {"x":12.5, "y":2.25}, {"x":13.5, "y":2.25, "w":1.5}, {"x":15.5, "y":2.25}, {"x":0, "y":3.25, "w":1.75}, {"x":1.75, "y":3.25}, {"x":2.75, "y":3.25}, {"x":3.75, "y":3.25}, {"x":4.75, "y":3.25}, {"x":5.75, "y":3.25}, {"x":6.75, "y":3.25}, {"x":7.75, "y":3.25}, {"x":8.75, "y":3.25}, {"x":9.75, "y":3.25}, {"x":10.75, "y":3.25}, {"x":11.75, "y":3.25}, {"x":12.75, "y":3.25, "w":2.25}, {"x":15.5, "y":3.25}, {"x":0, "y":4.25, "w":2.25}, {"x":2.25, "y":4.25}, {"x":3.25, "y":4.25}, {"x":4.25, "y":4.25}, {"x":5.25, "y":4.25}, {"x":6.25, "y":4.25}, {"x":7.25, "y":4.25}, {"x":8.25, "y":4.25}, {"x":9.25, "y":4.25}, {"x":10.25, "y":4.25}, {"x":11.25, "y":4.25}, {"x":12.25, "y":4.25, "w":1.75}, {"x":14.25, "y":4.5}, {"x":15.5, "y":4.25}, {"x":0, "y":5.25, "w":1.25}, {"x":1.25, "y":5.25, "w":1.25}, {"x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"x":10, "y":5.25, "w":1.5}, {"x":11.5, "y":5.25, "w":1.5}, {"x":13.25, "y":5.5}, {"x":14.25, "y":5.5}, {"x":15.25, "y":5.5}]
+        },
+
+        "LAYOUT_2x2": {
+            "layout": [{"x":0, "y":0}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.75, "y":0}, {"x":6.75, "y":0}, {"x":7.75, "y":0}, {"x":8.75, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":0, "y":1.25}, {"x":1, "y":1.25}, {"x":2, "y":1.25}, {"x":3, "y":1.25}, {"x":4, "y":1.25}, {"x":5, "y":1.25}, {"x":6, "y":1.25}, {"x":7, "y":1.25}, {"x":8, "y":1.25}, {"x":9, "y":1.25}, {"x":10, "y":1.25}, {"x":11, "y":1.25}, {"x":12, "y":1.25}, {"x":13, "y":1.25}, {"x":14, "y":1.25}, {"x":15.5, "y":1}, {"x":0, "y":2.25, "w":1.5}, {"x":1.5, "y":2.25}, {"x":2.5, "y":2.25}, {"x":3.5, "y":2.25}, {"x":4.5, "y":2.25}, {"x":5.5, "y":2.25}, {"x":6.5, "y":2.25}, {"x":7.5, "y":2.25}, {"x":8.5, "y":2.25}, {"x":9.5, "y":2.25}, {"x":10.5, "y":2.25}, {"x":11.5, "y":2.25}, {"x":12.5, "y":2.25}, {"x":13.5, "y":2.25, "w":1.5}, {"x":15.5, "y":2.25}, {"x":0, "y":3.25, "w":1.75}, {"x":1.75, "y":3.25}, {"x":2.75, "y":3.25}, {"x":3.75, "y":3.25}, {"x":4.75, "y":3.25}, {"x":5.75, "y":3.25}, {"x":6.75, "y":3.25}, {"x":7.75, "y":3.25}, {"x":8.75, "y":3.25}, {"x":9.75, "y":3.25}, {"x":10.75, "y":3.25}, {"x":11.75, "y":3.25}, {"x":12.75, "y":3.25, "w":2.25}, {"x":15.5, "y":3.25}, {"x":0, "y":4.25, "w":2.25}, {"x":2.25, "y":4.25}, {"x":3.25, "y":4.25}, {"x":4.25, "y":4.25}, {"x":5.25, "y":4.25}, {"x":6.25, "y":4.25}, {"x":7.25, "y":4.25}, {"x":8.25, "y":4.25}, {"x":9.25, "y":4.25}, {"x":10.25, "y":4.25}, {"x":11.25, "y":4.25}, {"x":12.25, "y":4.25, "w":1.75}, {"x":14.25, "y":4.5}, {"x":15.5, "y":4.25}, {"x":0, "y":5.25, "w":1.5}, {"x":1.5, "y":5.25, "w":1.5}, {"x":3, "y":5.25, "w":7}, {"x":10, "y":5.25, "w":1.5}, {"x":11.5, "y":5.25, "w":1.5}, {"x":13.25, "y":5.5}, {"x":14.25, "y":5.5}, {"x":15.25, "y":5.5}]
+        },
+
+        "LAYOUT_split_space": {
+            "layout": [{"x":0, "y":0}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.75, "y":0}, {"x":6.75, "y":0}, {"x":7.75, "y":0}, {"x":8.75, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":0, "y":1.25}, {"x":1, "y":1.25}, {"x":2, "y":1.25}, {"x":3, "y":1.25}, {"x":4, "y":1.25}, {"x":5, "y":1.25}, {"x":6, "y":1.25}, {"x":7, "y":1.25}, {"x":8, "y":1.25}, {"x":9, "y":1.25}, {"x":10, "y":1.25}, {"x":11, "y":1.25}, {"x":12, "y":1.25}, {"x":13, "y":1.25, "w":2}, {"x":15.5, "y":1}, {"x":0, "y":2.25, "w":1.5}, {"x":1.5, "y":2.25}, {"x":2.5, "y":2.25}, {"x":3.5, "y":2.25}, {"x":4.5, "y":2.25}, {"x":5.5, "y":2.25}, {"x":6.5, "y":2.25}, {"x":7.5, "y":2.25}, {"x":8.5, "y":2.25}, {"x":9.5, "y":2.25}, {"x":10.5, "y":2.25}, {"x":11.5, "y":2.25}, {"x":12.5, "y":2.25}, {"x":13.5, "y":2.25, "w":1.5}, {"x":15.5, "y":2.25}, {"x":0, "y":3.25, "w":1.75}, {"x":1.75, "y":3.25}, {"x":2.75, "y":3.25}, {"x":3.75, "y":3.25}, {"x":4.75, "y":3.25}, {"x":5.75, "y":3.25}, {"x":6.75, "y":3.25}, {"x":7.75, "y":3.25}, {"x":8.75, "y":3.25}, {"x":9.75, "y":3.25}, {"x":10.75, "y":3.25}, {"x":11.75, "y":3.25}, {"x":12.75, "y":3.25, "w":2.25}, {"x":15.5, "y":3.25}, {"x":0, "y":4.25, "w":2.25}, {"x":2.25, "y":4.25}, {"x":3.25, "y":4.25}, {"x":4.25, "y":4.25}, {"x":5.25, "y":4.25}, {"x":6.25, "y":4.25}, {"x":7.25, "y":4.25}, {"x":8.25, "y":4.25}, {"x":9.25, "y":4.25}, {"x":10.25, "y":4.25}, {"x":11.25, "y":4.25}, {"x":12.25, "y":4.25, "w":1.75}, {"x":14.25, "y":4.5}, {"x":15.5, "y":4.25}, {"x":0, "y":5.25, "w":1.25}, {"x":1.25, "y":5.25, "w":1.25}, {"x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":2.25}, {"x":6, "y":5.25, "w":1.25}, {"x":7.25, "y":5.25, "w":2.75}, {"x":10, "y":5.25}, {"x":11, "y":5.25}, {"x":12, "y":5.25}, {"x":13.25, "y":5.5}, {"x":14.25, "y":5.5}, {"x":15.25, "y":5.5}]
+        },
+
+        "LAYOUT_all": {
+            "layout": [{"x":0, "y":0}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.75, "y":0}, {"x":6.75, "y":0}, {"x":7.75, "y":0}, {"x":8.75, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":0, "y":1.25}, {"x":1, "y":1.25}, {"x":2, "y":1.25}, {"x":3, "y":1.25}, {"x":4, "y":1.25}, {"x":5, "y":1.25}, {"x":6, "y":1.25}, {"x":7, "y":1.25}, {"x":8, "y":1.25}, {"x":9, "y":1.25}, {"x":10, "y":1.25}, {"x":11, "y":1.25}, {"x":12, "y":1.25}, {"x":13, "y":1.25}, {"x":14, "y":1.25}, {"x":15.5, "y":1}, {"x":0, "y":2.25, "w":1.5}, {"x":1.5, "y":2.25}, {"x":2.5, "y":2.25}, {"x":3.5, "y":2.25}, {"x":4.5, "y":2.25}, {"x":5.5, "y":2.25}, {"x":6.5, "y":2.25}, {"x":7.5, "y":2.25}, {"x":8.5, "y":2.25}, {"x":9.5, "y":2.25}, {"x":10.5, "y":2.25}, {"x":11.5, "y":2.25}, {"x":12.5, "y":2.25}, {"x":13.5, "y":2.25, "w":1.5}, {"x":15.5, "y":2.25}, {"x":0, "y":3.25, "w":1.75}, {"x":1.75, "y":3.25}, {"x":2.75, "y":3.25}, {"x":3.75, "y":3.25}, {"x":4.75, "y":3.25}, {"x":5.75, "y":3.25}, {"x":6.75, "y":3.25}, {"x":7.75, "y":3.25}, {"x":8.75, "y":3.25}, {"x":9.75, "y":3.25}, {"x":10.75, "y":3.25}, {"x":11.75, "y":3.25}, {"x":12.75, "y":3.25}, {"x":13.75, "y":3.25, "w":1.25}, {"x":15.5, "y":3.25}, {"x":0, "y":4.25, "w":1.25}, {"x":1.25, "y":4.25}, {"x":2.25, "y":4.25}, {"x":3.25, "y":4.25}, {"x":4.25, "y":4.25}, {"x":5.25, "y":4.25}, {"x":6.25, "y":4.25}, {"x":7.25, "y":4.25}, {"x":8.25, "y":4.25}, {"x":9.25, "y":4.25}, {"x":10.25, "y":4.25}, {"x":11.25, "y":4.25}, {"x":12.25, "y":4.25, "w":1.75}, {"x":14.25, "y":4.5}, {"x":15.5, "y":4.25}, {"x":0, "y":5.25, "w":1.25}, {"x":1.25, "y":5.25, "w":1.25}, {"x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":2.25}, {"x":6, "y":5.25, "w":1.25}, {"x":7.25, "y":5.25, "w":2.75}, {"x":10, "y":5.25}, {"x":11, "y":5.25}, {"x":12, "y":5.25}, {"x":13.25, "y":5.5}, {"x":14.25, "y":5.5}, {"x":15.25, "y":5.5}]
+        }
+    }
+}

keyboards/cannonkeys/satisfaction75/rev1/rev1.h

@@ -24,7 +24,7 @@
 #define LAYOUT_iso( \
 	K000,       K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013,             \
 	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       K115, \
-	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       K215, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,             K215, \
 	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,       K315, \
 	K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413,       K415, \
 	K500, K501, K502,             K505,                   K509, K510, K511, K512, K513,       K515  \

keyboards/clueboard/card/rules.mk

@@ -11,7 +11,6 @@ MCU = atmega32u4
 #   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
-
 # Build Options
 BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes      # Mouse keys(+4700)

keyboards/crkbd/keymaps/dsanchezseco/README.md

@@ -0,0 +1,10 @@
+# Dvorak keymap for CRKBD
+
+To flash the halves use:
+
+```
+#left side
+make crkbd:dsanchezseco:dfu-split-left
+#right side, with RGB matrix fix
+make crkbd:dsanchezseco:dfu-split-right RGB_MATRIX_SPLIT_RIGHT=yes
+```

keyboards/crkbd/keymaps/dsanchezseco/config.h

@@ -0,0 +1,69 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+//#define USE_MATRIX_I2C
+#define USE_SERIAL
+
+/* Select hand configuration */
+
+// #define MASTER_LEFT
+// #define MASTER_RIGHT
+#define EE_HANDS
+
+// lower maximum brightness to lower power usage and prevent unresponsiveness
+#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200
+#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
+
+//disable effects
+#define DISABLE_RGB_MATRIX_ALPHAS_MODS         // Static dual hue speed is hue for secondary hue
+#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN    // Static gradient top to bottom speed controls how much gradient changes
+#define DISABLE_RGB_MATRIX_BAND_SAT        // Single hue band fading saturation scrolling left to right
+#define DISABLE_RGB_MATRIX_BAND_VAL        // Single hue band fading brightness scrolling left to right
+#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT   // Single hue 3 blade spinning pinwheel fades saturation
+#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL   // Single hue 3 blade spinning pinwheel fades brightness
+#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT     // Single hue spinning spiral fades saturation
+#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL     // Single hue spinning spiral fades brightness
+#define DISABLE_RGB_MATRIX_CYCLE_ALL           // Full keyboard solid hue cycling through full gradient
+#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN       // Full gradient scrolling top to bottom
+#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN        // Full gradient scrolling out to in
+#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL   // Full dual gradients scrolling out to in
+#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON  // Full gradent Chevron shapped scrolling left to right
+#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL      // Full gradient spinning pinwheel around center of keyboard
+#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL        // Full gradient spinning spiral around center of keyboard
+#define DISABLE_RGB_MATRIX_DUAL_BEACON         // Full gradient spinning around center of keyboard
+#define DISABLE_RGB_MATRIX_RAINBOW_BEACON      // Full tighter gradient spinning around center of keyboard
+#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS   // Full dual gradients spinning two halfs of keyboard
+#define DISABLE_RGB_MATRIX_RAINDROPS           // Randomly changes a single key's hue
+#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation
+#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE   // Pulses keys hit to hue & value then fades value out
+#define DISABLE_RGB_MATRIX_SOLID_REACTIVE      // Static single hue pulses keys hit to shifted hue then fades to current hue
+#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE       // Hue & value pulse near a single key hit then fades value out
+#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE  // Hue & value pulse near multiple key hits then fades value out
+#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS      // Hue & value pulse the same column and row of a single key hit then fades value out
+#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out
+#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS      // Hue & value pulse away on the same column and row of a single key hit then fades value out
+#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out
+#define DISABLE_RGB_MATRIX_SPLASH              // Full gradient & value pulse away from a single key hit then fades value out
+#define DISABLE_RGB_MATRIX_MULTISPLASH         // Full gradient & value pulse away from multiple key hits then fades value out
+#define DISABLE_RGB_MATRIX_SOLID_SPLASH        // Hue & value pulse away from a single key hit then fades value out
+#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH   // Hue & value pulse away from multiple key hits then fades value out
+#define DISABLE_RGB_MATRIX_EFFECT_MAX

keyboards/crkbd/keymaps/dsanchezseco/keymap.c

@@ -0,0 +1,111 @@
+#include QMK_KEYBOARD_H
+#include "split_util.h"
+
+extern keymap_config_t keymap_config;
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+#endif
+
+extern uint8_t is_master;
+
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+#define ESC_CTL LCTL_T(KC_ESC)
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum crkbd_layers {
+  _DVORAK,
+  _LOWER,
+  _RAISE,
+  _ADJUST
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_DVORAK] = LAYOUT( \
+  //,-----------------------------------------------.          ,-----------------------------------------------.
+     KC_TAB, KC_QUOT,KC_COMM, KC_DOT, KC_P,   KC_Y,              KC_F,   KC_G,   KC_C,   KC_R,   KC_L,  KC_SLSH,\
+  //|-------+-------+-------+-------+-------+-------|          |-------+-------+-------+-------+-------+-------|
+     ESC_CTL, KC_A,   KC_O,   KC_E,   KC_U,   KC_I,              KC_D,   KC_H,   KC_T,   KC_N,   KC_S, KC_MINUS,\
+  //|-------+-------+-------+-------+-------+-------|          |-------+-------+-------+-------+-------+-------|
+     KC_LSFT,KC_SCLN, KC_Q,   KC_J,   KC_K,   KC_X,              KC_B,   KC_M,   KC_W,   KC_V,   KC_Z,KC_SFTENT,\
+  //|-------+-------+-------+-------+-------+-------|          |-------+-------+-------+-------+-------+-------|
+                                KC_LGUI, LOWER, KC_SPC,    KC_BSPC, RAISE,KC_RALT \
+                             //`-----------------------'  `----------------------'
+  ),
+
+
+  [_LOWER] = LAYOUT( \
+  //,-----------------------------------------------.          ,-----------------------------------------------.
+     KC_TILD,KC_EXLM, KC_AT, KC_HASH, KC_DLR,KC_PERC,           KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RIGHT,KC_RPRN,\
+  //|-------+-------+-------+-------+-------+-------|          |-------+-------+-------+-------+-------+-------|
+     _______,KC_VOLD,KC_VOLU,KC_MPRV,KC_MPLY,KC_MNXT,           _______,KC_LEFT,KC_PLUS,KC_LCBR,KC_RCBR,KC_PIPE,\
+  //|-------+-------+-------+-------+-------+-------|          |-------+-------+-------+-------+-------+-------|
+     _______,_______,_______,KC_DOWN, KC_UP, _______,           _______,_______,_______,KC_HOME, KC_END,_______,\
+  //|-------+-------+-------+-------+-------+-------|          |-------+-------+-------+-------+-------+-------|
+                                _______,_______,_______,   KC_DEL,_______,_______ \
+                             //`-----------------------'  `----------------------'
+  ),
+
+  [_RAISE] = LAYOUT( \
+  //,-----------------------------------------------.          ,-----------------------------------------------.
+     KC_GRV,  KC_1,    KC_2,   KC_3,   KC_4,  KC_5,              KC_6,    KC_7,  KC_8,    KC_9,KC_RIGHT,  KC_0, \
+  //|-------+-------+-------+-------+-------+-------|          |-------+-------+-------+-------+-------+-------|
+     _______,_______,_______,_______,_______,_______,           _______,KC_LEFT, KC_EQL,KC_LBRC,KC_RBRC,KC_BSLS,\
+  //|-------+-------+-------+-------+-------+-------|          |-------+-------+-------+-------+-------+-------|
+     _______,_______,_______,KC_DOWN, KC_UP, _______,           _______,_______,_______,KC_PGUP,KC_PGDN,_______,\
+  //|-------+-------+-------+-------+-------+-------|          |-------+-------+-------+-------+-------+-------|
+                                _______,_______,_______,   KC_DEL ,_______,_______ \
+                             //`-----------------------'  `----------------------'
+  ),
+
+  [_ADJUST] = LAYOUT( \
+  //,-----------------------------------------------.          ,-----------------------------------------------.
+     RGB_TOG,RGB_HUI,RGB_SAI,RGB_VAI,_______,RGB_M_T,          _______,_______,_______,_______,KC_RIGHT,_______,\
+  //|-------+-------+-------+-------+-------+-------|          |-------+-------+-------+-------+-------+-------|
+     RGB_MOD,RGB_HUD,RGB_SAD,RGB_VAD,_______,_______,           _______,KC_LEFT,_______,_______,_______,_______,\
+  //|-------+-------+-------+-------+-------+-------|          |-------+-------+-------+-------+-------+-------|
+     _______,KC_PSCR,_______,KC_DOWN, KC_UP, _______,           _______,_______,_______,_______,_______,_______,\
+  //|-------+-------+-------+-------+-------+-------|          |-------+-------+-------+-------+-------+-------|
+                                _______,_______,_______,   KC_DEL ,_______,_______ \
+                             //`-----------------------'  `----------------------'
+  )
+};
+
+uint32_t layer_state_set_user(uint32_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+
+#ifdef OLED_DRIVER_ENABLE
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+  if (!isLeftHand)
+    return OLED_ROTATION_180;  // flips the display 180 to see it from my side
+  return rotation;
+}
+
+const char *read_logo(void);
+void oled_task_user(void){
+    switch (biton32(layer_state)){
+        case _DVORAK:
+            oled_write_ln_P(PSTR("DVRK"), false);
+            break;
+        case _LOWER:
+            oled_write_ln_P(PSTR("LOWER"), false);
+            break;
+        case _RAISE:
+            oled_write_ln_P(PSTR("RAISE"), false);
+            break;
+        case _ADJUST:
+            oled_write_ln_P(PSTR("ADJST"), false);
+            break;
+        default:
+            oled_write_ln_P(PSTR("?????"), false);
+    }
+  //now print logo
+  oled_write(read_logo(), false);
+}
+#endif

keyboards/crkbd/keymaps/dsanchezseco/logo_reader.c

@@ -0,0 +1,9 @@
+const char *read_logo(void) {
+  static char logo[] = {
+      0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94,
+      0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4,
+      0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4,
+      0};
+
+  return logo;
+}

keyboards/crkbd/keymaps/dsanchezseco/rules.mk

@@ -0,0 +1,15 @@
+
+# If you want to change the display of OLED, you need to change here
+SRC += ./logo_reader.c
+
+# enable OLED displays
+OLED_DRIVER_ENABLE = yes
+
+# enable media keys
+EXTRAKEY_ENABLE = yes
+
+# enable LEDs
+RGB_MATRIX_ENABLE = WS2812
+
+# using elite-c controllers
+BOOTLOADER = qmk-dfu

keyboards/crkbd/keymaps/soundmonster/README.md

@@ -0,0 +1,13 @@
+# Soundmonster's layout for Corne
+
+Features:
+
+* Modern OLED support (many thanks to @drashna):
+  * Proper orientation
+  * Graphic layer indicator ↑ ↓
+  * Graphic modifier indicator ⌘ ⇧ ⌥  ⌃
+* Similar enough to the default keymap so you can easily port your custom keymap to it
+* Mac-friendly (Command and Option on the thumbs)
+* Vim-friendly (Esc, `:` and Ctrl on the thumbs)
+* Full per-key RGB Matrix support out of the box (you still have to go through the nightmare of soldering yourself though 😉)
+

keyboards/crkbd/keymaps/soundmonster/config.h

@@ -0,0 +1,110 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+//#define USE_MATRIX_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+// #define SSD1306OLED
+#undef USE_I2C
+#undef SSD1306OLED
+
+#define USE_SERIAL_PD2
+
+// #define TAPPING_FORCE_HOLD
+#define TAPPING_TERM 150
+#define RETRO_TAPPING
+#define IGNORE_MOD_TAP_INTERRUPT
+
+#ifdef RGBLIGHT_ENABLE
+    #undef RGBLED_NUM
+    #define RGBLED_NUM 27
+    #define RGBLIGHT_ANIMATIONS
+    #define RGBLIGHT_SLEEP
+    #define RGBLIGHT_SPLIT
+    #define RGBLIGHT_LIMIT_VAL 120
+    #define RGBLIGHT_HUE_STEP 10
+    #define RGBLIGHT_SAT_STEP 17
+    #define RGBLIGHT_VAL_STEP 17
+#endif
+
+#define OLED_FONT_H "keyboards/crkbd/keymaps/soundmonster/glcdfont.c"
+// #define OLED_FONT_WIDTH 5
+// #define OLED_FONT_HEIGHT 7
+
+#ifdef RGB_MATRIX_ENABLE
+#   define RGB_MATRIX_KEYPRESSES // reacts to keypresses
+// #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
+// #   define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
+#   define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#   define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#   define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
+#   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
+#   define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. 
+#   define RGB_MATRIX_HUE_STEP 8
+#   define RGB_MATRIX_SAT_STEP 8
+#   define RGB_MATRIX_VAL_STEP 8
+#   define RGB_MATRIX_SPD_STEP 10
+
+/* Disable the animations you don't want/need.  You will need to disable a good number of these    *
+ * because they take up a lot of space.  Disable until you can successfully compile your firmware. */
+// #   define DISABLE_RGB_MATRIX_ALPHAS_MODS
+#   define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#   define DISABLE_RGB_MATRIX_BREATHING
+// #   define DISABLE_RGB_MATRIX_BAND_SAT
+#   define DISABLE_RGB_MATRIX_BAND_VAL
+#   define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+#   define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+#   define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+#   define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+#   define DISABLE_RGB_MATRIX_CYCLE_ALL
+#   define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#   define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#   define DISABLE_RGB_MATRIX_CYCLE_OUT_IN
+#   define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+// #   define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#   define DISABLE_RGB_MATRIX_DUAL_BEACON
+#   define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL
+#   define DISABLE_RGB_MATRIX_CYCLE_SPIRAL
+#   define DISABLE_RGB_MATRIX_RAINBOW_BEACON
+#   define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+// #   define DISABLE_RGB_MATRIX_RAINDROPS
+#   define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+// #   define DISABLE_RGB_MATRIX_TYPING_HEATMAP
+// #   define DISABLE_RGB_MATRIX_DIGITAL_RAIN
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+// #   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+#   define DISABLE_RGB_MATRIX_SPLASH
+// #   define DISABLE_RGB_MATRIX_MULTISPLASH
+#   define DISABLE_RGB_MATRIX_SOLID_SPLASH
+#   define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
+#endif

keyboards/crkbd/keymaps/soundmonster/glcdfont.c

@@ -0,0 +1,241 @@
+#pragma once
+
+#ifdef __AVR__
+ #include <avr/io.h>
+ #include <avr/pgmspace.h>
+#elif defined(ESP8266)
+ #include <pgmspace.h>
+#else
+ #define PROGMEM
+#endif
+
+// Corne 8x6 font with QMK Firmware Logo
+// Online editor: https://helixfonteditor.netlify.com/
+// See also: https://github.com/soundmonster/glcdfont_converter
+
+const unsigned char font[] PROGMEM = {
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
+0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
+0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
+0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
+0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
+0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
+0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
+0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
+0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
+0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
+0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
+0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
+0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
+0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
+0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
+0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
+0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
+0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
+0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
+0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
+0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
+0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
+0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
+0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
+0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
+0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
+0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
+0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
+0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
+0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
+0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
+0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
+0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
+0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
+0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
+0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
+0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
+0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
+0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
+0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
+0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
+0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
+0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
+0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
+0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
+0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
+0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
+0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
+0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
+0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
+0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
+0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
+0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
+0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
+0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
+0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
+0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
+0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
+0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
+0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
+0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
+0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
+0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
+0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
+0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
+0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
+0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
+0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
+0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
+0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
+0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
+0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
+0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
+0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
+0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
+0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
+0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
+0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
+0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
+0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
+0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
+0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
+0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
+0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
+0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
+0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
+0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
+0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
+0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
+0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
+0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
+0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
+0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
+0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
+0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
+0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
+0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
+0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
+0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
+0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
+0x18, 0x24, 0x24, 0x1C, 0x78, 0x00,
+0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
+0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
+0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
+0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
+0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
+0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
+0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
+0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
+0x7C, 0x18, 0x24, 0x24, 0x18, 0x00,
+0x18, 0x24, 0x24, 0x18, 0x7C, 0x00,
+0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
+0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
+0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
+0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
+0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
+0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
+0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
+0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00,
+0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
+0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
+0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
+0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
+0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
+0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xC0, 0xE0, 0xF0, 0xF8,
+0xF8, 0x18, 0x00, 0xC0, 0xF0, 0xFC,
+0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0x7E, 0x00, 0x00, 0x00,
+0x00, 0xF8, 0x04, 0x22, 0x52, 0xE2,
+0x42, 0x42, 0x42, 0xE2, 0x52, 0x22,
+0x22, 0x22, 0x42, 0x82, 0x02, 0x02,
+0x22, 0x22, 0x02, 0x04, 0xF8, 0x00,
+0x00, 0xF8, 0x04, 0x02, 0x02, 0x82,
+0x42, 0x22, 0x42, 0x82, 0x02, 0x02,
+0x02, 0x82, 0x42, 0x22, 0x12, 0x22,
+0x42, 0x82, 0x02, 0x04, 0xF8, 0x00,
+0x00, 0xF8, 0xFC, 0xDE, 0xAE, 0x1E,
+0xBE, 0xBE, 0xBE, 0x1E, 0xAE, 0xDE,
+0xDE, 0xDE, 0xBE, 0x7E, 0xFE, 0xFE,
+0xDE, 0xDE, 0xFE, 0xFC, 0xF8, 0x00,
+0x00, 0xF8, 0xFC, 0xFE, 0xFE, 0x7E,
+0xBE, 0xDE, 0xBE, 0x7E, 0xFE, 0xFE,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x80, 0x80, 0x40, 0x40, 0x20, 0x20,
+0x10, 0x10, 0x08, 0x08, 0x10, 0x10,
+0x20, 0x20, 0x40, 0x40, 0x80, 0x80,
+0x80, 0x80, 0xC0, 0xC0, 0xE0, 0xE0,
+0xF0, 0xF0, 0xF8, 0xF8, 0xF0, 0xF0,
+0xE0, 0xE0, 0xC0, 0xC0, 0x80, 0x80,
+0x80, 0x80, 0x40, 0x40, 0x20, 0x20,
+0x10, 0x10, 0x08, 0x08, 0x10, 0x10,
+0x20, 0x20, 0x40, 0x40, 0x80, 0x80,
+0x80, 0x80, 0x40, 0xC0, 0x60, 0xA0,
+0x50, 0xB0, 0x58, 0xA8, 0x50, 0xB0,
+0x60, 0xA0, 0x40, 0xC0, 0x80, 0x80,
+0x00, 0xF8, 0xFC, 0xFE, 0xFF, 0xE0,
+0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0x80, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x1F,
+0x07, 0x01, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x1F, 0x20, 0x44, 0x4A, 0x47,
+0x42, 0x42, 0x42, 0x47, 0x4A, 0x44,
+0x40, 0x40, 0x40, 0x40, 0x41, 0x42,
+0x44, 0x44, 0x40, 0x20, 0x1F, 0x00,
+0x00, 0x1F, 0x20, 0x40, 0x41, 0x40,
+0x40, 0x40, 0x40, 0x40, 0x41, 0x40,
+0x41, 0x41, 0x4F, 0x48, 0x48, 0x48,
+0x4F, 0x41, 0x41, 0x20, 0x1F, 0x00,
+0x00, 0x1F, 0x3F, 0x7B, 0x75, 0x78,
+0x7D, 0x7D, 0x7D, 0x78, 0x75, 0x7B,
+0x7F, 0x7F, 0x7F, 0x7F, 0x7E, 0x7D,
+0x7B, 0x7B, 0x7F, 0x3F, 0x1F, 0x00,
+0x00, 0x1F, 0x3F, 0x7F, 0x7E, 0x7F,
+0x7F, 0x7F, 0x7F, 0x7F, 0x7E, 0x7F,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x88, 0x88, 0x5D, 0x5D, 0x3E, 0x3E,
+0x7C, 0x7C, 0xF8, 0xF8, 0x7C, 0x7C,
+0x3E, 0x3E, 0x5D, 0x5D, 0x88, 0x88,
+0x88, 0x88, 0x55, 0x55, 0x23, 0x23,
+0x47, 0x47, 0x8F, 0x8F, 0x47, 0x47,
+0x23, 0x23, 0x55, 0x55, 0x88, 0x88,
+0x88, 0x88, 0xD5, 0xD5, 0xE2, 0xE2,
+0xC4, 0xC4, 0x88, 0x88, 0xC4, 0xC4,
+0xE2, 0xE2, 0xD5, 0xD5, 0x88, 0x88,
+0x88, 0x88, 0x5D, 0xD5, 0x6B, 0xB6,
+0x6D, 0xD6, 0xAD, 0xDA, 0x6D, 0xD6,
+0x6B, 0xB6, 0x5D, 0xD5, 0x88, 0x88,
+0x00, 0x03, 0x0F, 0x1F, 0x3F, 0x3F,
+0x3F, 0x3F, 0x1F, 0x1F, 0x3F, 0x3F,
+0x7F, 0x7F, 0x7F, 0x3F, 0x3F, 0x1F,
+0x3F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7C,
+0x78, 0x78, 0x38, 0x1C, 0x0F, 0x00,
+0x04, 0xF8, 0x00, 0x00, 0xF8, 0x04,
+0x20, 0x1F, 0x00, 0x00, 0x1F, 0x20,
+0xFC, 0xF8, 0x00, 0x00, 0xF8, 0x04,
+0x3F, 0x1F, 0x00, 0x00, 0x1F, 0x20,
+0x04, 0xF8, 0x00, 0x00, 0xF8, 0xFC,
+0x20, 0x1F, 0x00, 0x00, 0x1F, 0x3F,
+0xFC, 0xF8, 0x00, 0x00, 0xF8, 0xFC,
+0x3F, 0x1F, 0x00, 0x00, 0x1F, 0x3F,
+0xFE, 0x7E, 0xBE, 0xDE, 0xEE, 0xDE,
+0xBE, 0x7E, 0xFE, 0xFC, 0xF8, 0x00,
+0x7E, 0x7E, 0x70, 0x77, 0x77, 0x77,
+0x70, 0x7E, 0x7E, 0x3F, 0x1F, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x01, 0x01, 0x02, 0x02,
+0x04, 0x04, 0x08, 0x08, 0x04, 0x04,
+0x02, 0x02, 0x01, 0x01, 0x00, 0x00,
+0x00, 0x00, 0x01, 0x01, 0x02, 0x02,
+0x04, 0x04, 0x08, 0x08, 0x04, 0x04,
+0x02, 0x02, 0x01, 0x01, 0x00, 0x00,
+0x00, 0x00, 0x01, 0x01, 0x03, 0x03,
+0x07, 0x07, 0x0F, 0x0F, 0x07, 0x07,
+0x03, 0x03, 0x01, 0x01, 0x00, 0x00,
+0x00, 0x00, 0x01, 0x01, 0x03, 0x02,
+0x05, 0x06, 0x0D, 0x0A, 0x05, 0x06,
+0x03, 0x02, 0x01, 0x01, 0x00, 0x00
+};

keyboards/crkbd/keymaps/soundmonster/keymap.c

@@ -0,0 +1,393 @@
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+#endif
+
+#ifdef OLED_DRIVER_ENABLE
+static uint32_t oled_timer = 0;
+#endif
+
+extern uint8_t is_master;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum layers {
+  _QWERTY,
+  _LOWER,
+  _RAISE,
+  _ADJUST
+};
+
+// Custom keycodes for layer keys
+// Dual function escape with left command
+#define KC_LGESC LGUI_T(KC_ESC)
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST,
+  RGBRST,
+  KC_RACL // right alt / colon
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT(
+  //,-----------------------------------------.                ,---------------------------------------------.
+     KC_TAB,  KC_Q,  KC_W,  KC_E,  KC_R,  KC_T,                   KC_Y,  KC_U,  KC_I,  KC_O,  KC_P,  KC_BSPC,
+  //|------+------+------+------+------+------|                |------+------+-------+------+-------+--------|
+    KC_LCTL,  KC_A,  KC_S,  KC_D,  KC_F,  KC_G,                   KC_H,  KC_J,  KC_K,  KC_L, KC_SCLN,KC_QUOT,
+  //|------+------+------+------+------+------|                |------+------+-------+------+-------+--------|
+    KC_LSPO,  KC_Z,  KC_X,  KC_C,  KC_V,  KC_B,                   KC_N,  KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_RSPC,
+  //|------+------+------+------+------+------+------|  |------+------+------+-------+------+-------+--------|
+                               KC_LGESC,LOWER, KC_SPC,   RCTL_T(KC_ENT), RAISE, KC_RACL
+                              //`--------------------'  `--------------------'
+  ),
+
+  [_LOWER] = LAYOUT(
+  //,---------------------------------------------.                ,-----------------------------------------.
+     KC_ESC,  KC_1, KC_2,   KC_3,   KC_4,   KC_5,                    KC_6,  KC_7,  KC_8,  KC_9,  KC_0, KC_DEL,
+  //|------+------+-------+-------+-------+-------|                |------+------+------+------+------+------|
+    KC_LCTL, KC_NO,KC_MS_L,KC_MS_D,KC_MS_U,KC_MS_R,                KC_LEFT,KC_DOWN,KC_UP,KC_RIGHT,KC_NO,KC_NO,
+  //|------+------+-------+-------+-------+-------|                |------+------+------+------+------+------|
+    KC_LSFT, KC_NO,KC_BTN2,KC_WH_D,KC_WH_U,KC_BTN1,                KC_HOME,KC_PGDN,KC_PGUP,KC_END,KC_NO,KC_NO,
+  //|------+------+-------+-------+-------+-------+------|  |------+------+------+------+------+------+------|
+                                    KC_LGUI, LOWER,KC_SPC,   KC_ENT, RAISE,KC_RALT
+                                  //`--------------------'  `--------------------'
+  ),
+
+  [_RAISE] = LAYOUT(
+  //,-----------------------------------------.                ,-----------------------------------------.
+     KC_ESC,KC_EXLM,KC_AT,KC_HASH,KC_DLR,KC_PERC,              KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_BSPC,
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+    KC_LCTL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5,                KC_MINS,KC_EQL,KC_LCBR,KC_RCBR,KC_PIPE,KC_GRV,
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+    KC_LSFT, KC_F6, KC_F7, KC_F8, KC_F9,KC_F10,                KC_UNDS,KC_PLUS,KC_LBRC,KC_RBRC,KC_BSLS,KC_TILD,
+  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+                                KC_LGUI, LOWER,KC_SPC,   KC_ENT, RAISE,KC_RALT
+                              //`--------------------'  `--------------------'
+  ),
+
+  [_ADJUST] = LAYOUT(
+  //,-----------------------------------------.                ,-----------------------------------------.
+      RESET,RGBRST, KC_NO, KC_NO, KC_NO, KC_NO,                  KC_NO,KC__MUTE, KC_NO, KC_NO, KC_NO, KC_NO,
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+    RGB_TOG,RGB_HUI,RGB_SAI,RGB_VAI,RGB_SPI,KC_NO,               KC_PAUSE,KC__VOLUP, KC_NO, KC_NO, KC_NO, KC_NO,
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+    RGB_MOD,RGB_HUD,RGB_SAD,RGB_VAD,RGB_SPD,KC_NO,               KC_SCROLLLOCK,KC__VOLDOWN, KC_NO, KC_NO, KC_NO, RGB_RMOD,
+  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+                                KC_LGUI, LOWER,KC_SPC,   KC_ENT, RAISE,KC_RALT
+                              //`--------------------'  `--------------------'
+  )
+};
+
+int RGB_current_mode;
+
+// Setting ADJUST layer RGB back to default
+void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
+  if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
+    layer_on(layer3);
+  } else {
+    layer_off(layer3);
+  }
+}
+
+void matrix_init_user(void) {
+    #ifdef RGBLIGHT_ENABLE
+      RGB_current_mode = rgblight_config.mode;
+    #endif
+}
+
+#ifdef OLED_DRIVER_ENABLE
+oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_270; }
+
+void render_space(void) {
+    oled_write_P(PSTR("     "), false);
+}
+
+void render_mod_status_gui_alt(uint8_t modifiers) {
+    static const char PROGMEM gui_off_1[] = {0x85, 0x86, 0};
+    static const char PROGMEM gui_off_2[] = {0xa5, 0xa6, 0};
+    static const char PROGMEM gui_on_1[] = {0x8d, 0x8e, 0};
+    static const char PROGMEM gui_on_2[] = {0xad, 0xae, 0};
+
+    static const char PROGMEM alt_off_1[] = {0x87, 0x88, 0};
+    static const char PROGMEM alt_off_2[] = {0xa7, 0xa8, 0};
+    static const char PROGMEM alt_on_1[] = {0x8f, 0x90, 0};
+    static const char PROGMEM alt_on_2[] = {0xaf, 0xb0, 0};
+
+    // fillers between the modifier icons bleed into the icon frames
+    static const char PROGMEM off_off_1[] = {0xc5, 0};
+    static const char PROGMEM off_off_2[] = {0xc6, 0};
+    static const char PROGMEM on_off_1[] = {0xc7, 0};
+    static const char PROGMEM on_off_2[] = {0xc8, 0};
+    static const char PROGMEM off_on_1[] = {0xc9, 0};
+    static const char PROGMEM off_on_2[] = {0xca, 0};
+    static const char PROGMEM on_on_1[] = {0xcb, 0};
+    static const char PROGMEM on_on_2[] = {0xcc, 0};
+
+    if(modifiers & MOD_MASK_GUI) {
+        oled_write_P(gui_on_1, false);
+    } else {
+        oled_write_P(gui_off_1, false);
+    }
+
+    if ((modifiers & MOD_MASK_GUI) && (modifiers & MOD_MASK_ALT)) {
+        oled_write_P(on_on_1, false);
+    } else if(modifiers & MOD_MASK_GUI) {
+        oled_write_P(on_off_1, false);
+    } else if(modifiers & MOD_MASK_ALT) {
+        oled_write_P(off_on_1, false);
+    } else {
+        oled_write_P(off_off_1, false);
+    }
+
+    if(modifiers & MOD_MASK_ALT) {
+        oled_write_P(alt_on_1, false);
+    } else {
+        oled_write_P(alt_off_1, false);
+    }
+
+    if(modifiers & MOD_MASK_GUI) {
+        oled_write_P(gui_on_2, false);
+    } else {
+        oled_write_P(gui_off_2, false);
+    }
+
+    if (modifiers & MOD_MASK_GUI & MOD_MASK_ALT) {
+        oled_write_P(on_on_2, false);
+    } else if(modifiers & MOD_MASK_GUI) {
+        oled_write_P(on_off_2, false);
+    } else if(modifiers & MOD_MASK_ALT) {
+        oled_write_P(off_on_2, false);
+    } else {
+        oled_write_P(off_off_2, false);
+    }
+
+    if(modifiers & MOD_MASK_ALT) {
+        oled_write_P(alt_on_2, false);
+    } else {
+        oled_write_P(alt_off_2, false);
+    }
+}
+
+void render_mod_status_ctrl_shift(uint8_t modifiers) {
+    static const char PROGMEM ctrl_off_1[] = {0x89, 0x8a, 0};
+    static const char PROGMEM ctrl_off_2[] = {0xa9, 0xaa, 0};
+    static const char PROGMEM ctrl_on_1[] = {0x91, 0x92, 0};
+    static const char PROGMEM ctrl_on_2[] = {0xb1, 0xb2, 0};
+
+    static const char PROGMEM shift_off_1[] = {0x8b, 0x8c, 0};
+    static const char PROGMEM shift_off_2[] = {0xab, 0xac, 0};
+    static const char PROGMEM shift_on_1[] = {0xcd, 0xce, 0};
+    static const char PROGMEM shift_on_2[] = {0xcf, 0xd0, 0};
+
+    // fillers between the modifier icons bleed into the icon frames
+    static const char PROGMEM off_off_1[] = {0xc5, 0};
+    static const char PROGMEM off_off_2[] = {0xc6, 0};
+    static const char PROGMEM on_off_1[] = {0xc7, 0};
+    static const char PROGMEM on_off_2[] = {0xc8, 0};
+    static const char PROGMEM off_on_1[] = {0xc9, 0};
+    static const char PROGMEM off_on_2[] = {0xca, 0};
+    static const char PROGMEM on_on_1[] = {0xcb, 0};
+    static const char PROGMEM on_on_2[] = {0xcc, 0};
+
+    if(modifiers & MOD_MASK_CTRL) {
+        oled_write_P(ctrl_on_1, false);
+    } else {
+        oled_write_P(ctrl_off_1, false);
+    }
+
+    if ((modifiers & MOD_MASK_CTRL) && (modifiers & MOD_MASK_SHIFT)) {
+        oled_write_P(on_on_1, false);
+    } else if(modifiers & MOD_MASK_CTRL) {
+        oled_write_P(on_off_1, false);
+    } else if(modifiers & MOD_MASK_SHIFT) {
+        oled_write_P(off_on_1, false);
+    } else {
+        oled_write_P(off_off_1, false);
+    }
+
+    if(modifiers & MOD_MASK_SHIFT) {
+        oled_write_P(shift_on_1, false);
+    } else {
+        oled_write_P(shift_off_1, false);
+    }
+
+    if(modifiers & MOD_MASK_CTRL) {
+        oled_write_P(ctrl_on_2, false);
+    } else {
+        oled_write_P(ctrl_off_2, false);
+    }
+
+    if (modifiers & MOD_MASK_CTRL & MOD_MASK_SHIFT) {
+        oled_write_P(on_on_2, false);
+    } else if(modifiers & MOD_MASK_CTRL) {
+        oled_write_P(on_off_2, false);
+    } else if(modifiers & MOD_MASK_SHIFT) {
+        oled_write_P(off_on_2, false);
+    } else {
+        oled_write_P(off_off_2, false);
+    }
+
+    if(modifiers & MOD_MASK_SHIFT) {
+        oled_write_P(shift_on_2, false);
+    } else {
+        oled_write_P(shift_off_2, false);
+    }
+}
+
+void render_logo(void) {
+    static const char PROGMEM corne_logo[] = {
+        0x80, 0x81, 0x82, 0x83, 0x84,
+        0xa0, 0xa1, 0xa2, 0xa3, 0xa4,
+        0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0};
+    oled_write_P(corne_logo, false);
+    oled_write_P(PSTR("corne"), false);
+}
+
+void render_layer_state(void) {
+    static const char PROGMEM default_layer[] = {
+        0x20, 0x94, 0x95, 0x96, 0x20,
+        0x20, 0xb4, 0xb5, 0xb6, 0x20,
+        0x20, 0xd4, 0xd5, 0xd6, 0x20, 0};
+    static const char PROGMEM raise_layer[] = {
+        0x20, 0x97, 0x98, 0x99, 0x20,
+        0x20, 0xb7, 0xb8, 0xb9, 0x20,
+        0x20, 0xd7, 0xd8, 0xd9, 0x20, 0};
+    static const char PROGMEM lower_layer[] = {
+        0x20, 0x9a, 0x9b, 0x9c, 0x20,
+        0x20, 0xba, 0xbb, 0xbc, 0x20,
+        0x20, 0xda, 0xdb, 0xdc, 0x20, 0};
+    static const char PROGMEM adjust_layer[] = {
+        0x20, 0x9d, 0x9e, 0x9f, 0x20,
+        0x20, 0xbd, 0xbe, 0xbf, 0x20,
+        0x20, 0xdd, 0xde, 0xdf, 0x20, 0};
+    if(layer_state_is(_ADJUST)) {
+        oled_write_P(adjust_layer, false);
+    } else if(layer_state_is(_LOWER)) {
+        oled_write_P(lower_layer, false);
+    } else if(layer_state_is(_RAISE)) {
+        oled_write_P(raise_layer, false);
+    } else {
+        oled_write_P(default_layer, false);
+    }
+}
+
+void render_status_main(void) {
+    render_logo();
+    render_space();
+    render_layer_state();
+    render_space();
+    render_mod_status_gui_alt(get_mods()|get_oneshot_mods());
+    render_mod_status_ctrl_shift(get_mods()|get_oneshot_mods());
+}
+
+void render_status_secondary(void) {
+    render_logo();
+    render_space();
+    render_layer_state();
+    render_space();
+    render_mod_status_gui_alt(get_mods()|get_oneshot_mods());
+    render_mod_status_ctrl_shift(get_mods()|get_oneshot_mods());
+}
+
+void oled_task_user(void) {
+    if (timer_elapsed32(oled_timer) > 30000) {
+        oled_off();
+        return;
+    }
+#ifndef SPLIT_KEYBOARD
+    else { oled_on(); }
+#endif
+
+    if (is_master) {
+        render_status_main();  // Renders the current keyboard state (layer, lock, caps, scroll, etc)
+    } else {
+        render_status_secondary();
+    }
+}
+
+#endif
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  if (record->event.pressed) {
+#ifdef OLED_DRIVER_ENABLE
+        oled_timer = timer_read32();
+#endif
+    // set_timelog();
+  }
+  static uint16_t my_colon_timer;
+
+  switch (keycode) {
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+    case ADJUST:
+        if (record->event.pressed) {
+          layer_on(_ADJUST);
+        } else {
+          layer_off(_ADJUST);
+        }
+        return false;
+    case KC_RACL:
+        if (record->event.pressed) {
+          my_colon_timer = timer_read();
+          register_code(KC_RALT);
+        } else {
+          unregister_code(KC_RALT);
+          if (timer_elapsed(my_colon_timer) < TAPPING_TERM) {
+            SEND_STRING(":"); // Change the character(s) to be sent on tap here
+          }
+        }
+        return false;
+    case RGBRST:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          eeconfig_update_rgblight_default();
+          rgblight_enable();
+          RGB_current_mode = rgblight_config.mode;
+        }
+      #endif
+      #ifdef RGB_MATRIX_ENABLE
+        if (record->event.pressed) {
+          eeconfig_update_rgb_matrix_default();
+          rgb_matrix_enable();
+        }
+      #endif
+      break;
+  }
+  return true;
+}
+
+#ifdef RGB_MATRIX_ENABLE
+
+void suspend_power_down_keymap(void) {
+    rgb_matrix_set_suspend_state(true);
+}
+
+void suspend_wakeup_init_keymap(void) {
+    rgb_matrix_set_suspend_state(false);
+}
+
+#endif

keyboards/crkbd/keymaps/soundmonster/rules.mk

@@ -0,0 +1,6 @@
+RGBLIGHT_ENABLE    = no
+RGB_MATRIX_ENABLE  = WS2812
+MOUSEKEY_ENABLE    = no
+NKRO_ENABLE        = yes
+OLED_DRIVER_ENABLE = yes
+

keyboards/duck/orion/v3/rules.mk

@@ -11,7 +11,6 @@ MCU = atmega32u4
 #   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
-
 # Build Options
 #   change yes to no to disable
 #
@@ -36,4 +35,4 @@ CUSTOM_MATRIX = yes
 SRC += indicator_leds.c \
 			 matrix.c duck_led/duck_led.c
 
-LAYOUTS = tkl_ansi
+LAYOUTS = tkl_ansi

keyboards/dz60/dz60.h

@@ -548,4 +548,57 @@
     { k40,  k41,   KC_NO, k43,  KC_NO, KC_NO, k46,  KC_NO, KC_NO, KC_NO, k4a, KC_NO,  k4c, k4d,   k4e   }  \
 }
 
+/* LAYOUT_60_iso_5x1u_split_bs_rshift_spc
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │0e │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+ * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │     │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐2d  │
+ * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │1e │    │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┤
+ * │30  |31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3d    │3e │
+ * ├────┼───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴──┬┴──┬┴──┬───┼───┤
+ * │40  │41  │43  │44      │46  │48        │4a │4b │4c │4d │4e │
+ * └────┴────┴────┴────────┴────┴──────────┴───┴───┴───┴───┴───┘
+*/
+#define LAYOUT_60_iso_5x1u_split_bs_rshift_spc( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d,      \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k1e, k2d, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3d, k3e, \
+    k40, k41,      k43, k44,      k46,      k48,      k4a, k4b, k4c, k4d, k4e  \
+) { \
+    { k00,  k01,   k02,   k03,  k04,  k05,   k06,  k07,   k08,  k09,   k0a,  k0b,   k0c,  k0d,  k0e   }, \
+    { k10,  KC_NO, k12,   k13,  k14,  k15,   k16,  k17,   k18,  k19,   k1a,  k1b,   k1c,  k1d,  k1e   }, \
+    { k20,  KC_NO, k22,   k23,  k24,  k25,   k26,  k27,   k28,  k29,   k2a,  k2b,   k2c,  k2d,  KC_NO }, \
+    { k30,  k31,   k32,   k33,  k34,  k35,   k36,  k37,   k38,  k39,   k3a,  k3b,   KC_NO,k3d,  k3e   }, \
+    { k40,  k41,   KC_NO, k43,  k44,  KC_NO, k46,  KC_NO, k48,  KC_NO, k4a,  k4b,   k4c,  k4d,  k4e   }  \
+}
+
+/* LAYOUT_60_olivierko
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │0e │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+ * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e   │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+ * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d      │
+ * ├──────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬───────┤
+ * │30     │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c │3d     │
+ * ├─────┬─┴─┬─┴───┼───┴───┴───┴───┴───┴───┴───┼───┼───┼───┬───┤
+ * │40   │41 │43   │46 (7u)                    │4b │4c │4d │4e │
+ * └─────┴───┴─────┴───────────────────────────┴───┴───┴───┴───┘
+*/
+#define LAYOUT_olivierko( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+	k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+	k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d,      \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d,      \
+	k40, k41,      k43,           k46,                     k4b, k4c, k4d, k4e  \
+) { \
+    { k00,  k01,   k02,   k03,  k04,   k05,   k06,  k07,   k08,   k09,   k0a,   k0b,  k0c,   k0d,   k0e   }, \
+    { k10,  KC_NO, k12,   k13,  k14,   k15,   k16,  k17,   k18,   k19,   k1a,   k1b,  k1c,   k1d,   k1e   }, \
+    { k20,  KC_NO, k22,   k23,  k24,   k25,   k26,  k27,   k28,   k29,   k2a,   k2b,  k2c,   k2d,   KC_NO }, \
+    { k30,  KC_NO, k32,   k33,  k34,   k35,   k36,  k37,   k38,   k39,   k3a,   k3b,  k3c,   k3d,   KC_NO }, \
+	{ k40,  k41,   KC_NO, k43,  KC_NO, KC_NO, k46,  KC_NO, KC_NO, KC_NO, KC_NO, k4b,  k4c,   k4d,   k4e   }  \
+}
 #endif

keyboards/dz60/info.json

@@ -80,6 +80,14 @@
     "LAYOUT_60_2_function": {
         "key_count": 63,
         "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"GUI", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.5}, {"label":"Control", "x":11.5, "y":4, "w":1.5}, {"label":"GUI", "x":13, "y":4}, {"label":"Fn2", "x":14, "y":4}]
-      }
+	},
+    "LAYOUT_60_iso_5x1u_split_bs_rshift_spc": {
+      "key_count": 67,
+      "layout": [{"label":"Esc/¬", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"£", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Del", "x":13, "y":0, "w":1}, {"label":"Backspace", "x":14, "y":0, "w":1}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"VolUp", "x":14, "y":3, "w":1}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6.00, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"label":"Left", "x":10, "y":4, "w":1}, {"label":"Down", "x":11, "y":4, "w":1}, {"label":"Up", "x":12, "y":4, "w":1}, {"label":"Right", "x":13, "y":4, "w":1}, {"label":"VolDown", "x":14, "y":4, "w":1}]
+    },
+    "LAYOUT_olivierko": {
+      "key_count": 63,
+      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"Fn", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2}, {"label":"Z", "x":2, "y":3}, {"label":"X", "x":3, "y":3}, {"label":"C", "x":4, "y":3}, {"label":"V", "x":5, "y":3}, {"label":"B", "x":6, "y":3}, {"label":"N", "x":7, "y":3}, {"label":"M", "x":8, "y":3}, {"label":"<", "x":9, "y":3}, {"label":">", "x":10, "y":3}, {"label":"?", "x":11, "y":3}, {"label":"↑", "x":12, "y":3}, {"label":"Shift", "x":13, "y":3, "w":2}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"←", "x":11, "y":4}, {"label":"↓", "x":12, "y":4}, {"label":"→", "x":13, "y":4}, {"label":"Ctrl", "x":14, "y":4}]
+    }
   }
 }

keyboards/dz60/keymaps/iso_vim_arrow_split_rs/README.md

@@ -0,0 +1,3 @@
+# ISO layout with VIM style arrow cluster
+
+Vim arrow keys with split right shift and backspace (currently not utilised in this layout but I thought I would add it to make it easier for people to add it for their layouts).

keyboards/dz60/keymaps/iso_vim_arrow_split_rs/keymap.c

@@ -0,0 +1,49 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  /* 
+   * ,-----------------------------------------------------------.
+   * |Esc|1 !|2 "|3 £|4 $|5 %|6 ^|7 &|8 *|9 (|0 )|- _|= +|bck|bck|
+   * |-----------------------------------------------------------|
+   * | Tab | Q | W | E | R | T | Y | U | I | O | P |[ {|] }|Enter|
+   * |------------------------------------------------------.    |
+   * | Fn1  | A | S | D | F | G | H | J | K | L |; :|' @|# ~|    |
+   * |-----------------------------------------------------------|
+   * |Sft |\ || Z | X | C | V | B | N | M |, <|. >|/ ?| Caps |vU |
+   * |-----------------------------------------------------------|
+   * |Ctrl |GUI|Alt  |         Space         |Lft|Dwn|Up |Rht|vD |
+   * `-----------------------------------------------------------'
+   */
+  LAYOUT_60_iso_5x1u_split_bs_rshift_spc(
+//QWERTY Base layer:
+//  1        2        3        4        5        6        7        8        9        10       11       12       13       14       15
+    KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,
+    MO(1),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,
+    KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_CAPS, KC_VOLU,
+    KC_LCTL, KC_LGUI, KC_LALT, KC_NO,            KC_SPC,                    KC_NO,   KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT,KC_VOLD
+  ),
+
+
+  LAYOUT_60_iso_5x1u_split_bs_rshift_spc(
+//F key layer:
+//  1        2        3        4        5        6        7        8        9        10       11       12       13       14       15
+    KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2),   KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_NO,            KC_TRNS,                   KC_NO,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+  ),
+
+  LAYOUT_60_iso_5x1u_split_bs_rshift_spc(
+//Reset by holding Fn1 and Fn2 and press the D key
+//  1        2        3        4        5        6        7        8        9        10       11       12       13       14       15
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2),   KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_NO,            KC_TRNS,                   KC_NO,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+  ),
+
+};

keyboards/dz60/keymaps/iso_vim_arrow_split_rs/rules.mk

@@ -0,0 +1,7 @@
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no

keyboards/dz60/keymaps/olivierko/keymap.c

@@ -0,0 +1,87 @@
+#include QMK_KEYBOARD_H
+
+enum keyboard_layers {
+  _BL,
+  _SL,
+  _FL,
+  _CL,
+};
+
+enum custom_keycodes {
+  SWE_AA = SAFE_RANGE,
+  SWE_AE,
+  SWE_OE,
+};
+
+char *alt_codes[][2] = {
+    {
+        SS_LALT(SS_TAP(X_KP_0)SS_TAP(X_KP_2)SS_TAP(X_KP_2)SS_TAP(X_KP_9)), // Alt+0229 → å
+        SS_LALT(SS_TAP(X_KP_0)SS_TAP(X_KP_1)SS_TAP(X_KP_9)SS_TAP(X_KP_7)), // Alt+0197 → Å
+    },
+    {
+		SS_LALT(SS_TAP(X_KP_0)SS_TAP(X_KP_2)SS_TAP(X_KP_2)SS_TAP(X_KP_8)), // Alt+0228 → ä
+        SS_LALT(SS_TAP(X_KP_0)SS_TAP(X_KP_1)SS_TAP(X_KP_9)SS_TAP(X_KP_6)), // Alt+0196 → Ä
+    },
+    {
+        SS_LALT(SS_TAP(X_KP_0)SS_TAP(X_KP_2)SS_TAP(X_KP_4)SS_TAP(X_KP_6)), // Alt+0246 → ö
+        SS_LALT(SS_TAP(X_KP_0)SS_TAP(X_KP_2)SS_TAP(X_KP_1)SS_TAP(X_KP_4)), // Alt+0214 → Ö
+    },
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[_BL] = LAYOUT_olivierko(
+		KC_ESC,	 	KC_1,	  	KC_2,	 	KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		KC_MINS,	KC_EQL,		KC_BSLS,		KC_GRV,
+		KC_TAB,	 	KC_Q,	  	KC_W,	 	KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_LBRC,	KC_RBRC,	KC_BSPC,
+		MO(_FL),	KC_A,	  	KC_S,	 	KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,	KC_QUOT,	KC_ENT,		
+		KC_LSFT, 	KC_Z,	  	KC_X,	 	KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_SLSH,	KC_UP, 		KC_RSFT,	
+		KC_LCTL, 	KC_LGUI,  	KC_LALT, 										KC_SPC,											KC_LEFT,	KC_DOWN,	KC_RIGHT,	KC_RCTL),
+									
+	[_SL] = LAYOUT_olivierko(
+		KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,		KC_TRNS,
+		KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	SWE_AA,		KC_NO,		KC_TRNS,
+		KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	SWE_OE,		SWE_AE,		KC_TRNS,		
+		KC_TRNS, 	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS, 	KC_TRNS,	
+		KC_TRNS, 	KC_TRNS,  	KC_TRNS, 										KC_TRNS,										KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS),									
+									
+	[_FL] = LAYOUT_olivierko(								
+		KC_ESC,		KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		KC_PSCR,		KC_PAUSE,
+		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_DELETE,
+		KC_NO,		DF(_BL),	DF(_SL),	KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_INS,	
+		KC_LSFT,	KC_NO,		KC_NO,		KC_CAPS,	KC_NO,		KC_NO,		KC_NO,		KC_MUTE,	KC_NO,		KC_NO,		KC_NO,		KC_PGUP,	KC_RSFT,	
+		KC_LCTL,	MO(_CL),	KC_LALT,										KC_MPLY,										KC_HOME,	KC_PGDOWN,	KC_END,		KC_RCTL),
+											
+	[_CL] = LAYOUT_olivierko(								
+		RGB_TOG,	RGB_MOD,	RGB_HUI,	RGB_HUD,	RGB_SAI,	RGB_SAD,	RGB_VAI,	RGB_VAD,	KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,			KC_NO,
+		KC_NO,		KC_NO,		KC_NO,		KC_NO,		RESET,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,
+		KC_NO,		KC_NO,		KC_NO,		DEBUG,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,	
+		KC_LSFT,	KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_RSFT,	
+		KC_NO,		KC_NO,		KC_NO,											KC_NO,											KC_NO,		KC_NO,		KC_NO,		KC_NO),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record)
+{
+    if (!record->event.pressed) 
+		return true;
+
+    switch (keycode) {
+		case SWE_AA: 
+		case SWE_AE: 
+		case SWE_OE: {
+			uint16_t index = keycode - SWE_AA;
+			uint8_t shift = get_mods() & (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT));
+
+			unregister_code(KC_LSFT);
+			unregister_code(KC_RSFT);
+
+			send_string(alt_codes[index][(bool)shift]);
+
+			if (shift & MOD_BIT(KC_LSFT)) register_code(KC_LSFT);
+			if (shift & MOD_BIT(KC_RSFT)) register_code(KC_RSFT);
+
+			return false;
+		}
+		default:
+			return true;
+    }
+}

keyboards/dz60/keymaps/olivierko/readme.md

@@ -0,0 +1,21 @@
+# DZ60
+### _BL:
+Base layer with american ANSI layout.  
+
+![_BL](https://i.imgur.com/BPMn7dk.png)
+### _SL:
+Swedish layer with ÅÄÖ at original positions.  
+
+![_SL](https://i.imgur.com/I8QRh24.png)
+### _FL:
+Function layer including various extra keys.  
+
+![_FL](https://i.imgur.com/nCbCIrZ.png)
+### _CL:
+Control layer for managing RGB and flashing.  
+
+![_CL](https://i.imgur.com/QnoMgsb.png)
+### Make command:
+```sh
+make dz60:olivierko:flash
+```

keyboards/ergodox_ez/config.h

@@ -40,6 +40,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MOUSEKEY_MAX_SPEED      7
 #define MOUSEKEY_WHEEL_DELAY 0
 
+#define DEBOUNCE 30
+
 #define TAPPING_TOGGLE  1
 
 /* define if matrix has ghost */

keyboards/ergodox_ez/matrix.c

@@ -31,6 +31,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "matrix.h"
 #include "debounce.h"
 #include QMK_KEYBOARD_H
+
+// Only enable this if console is enabled to print to
+#if defined(DEBUG_MATRIX_SCAN_RATE) && !defined(CONSOLE_ENABLE)
+#    undef DEBUG_MATRIX_SCAN_RATE
+#endif
+
 #ifdef DEBUG_MATRIX_SCAN_RATE
 #  include "timer.h"
 #endif
@@ -47,10 +53,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  * that comment was written.)
  */
 
-#ifndef DEBOUNCE
-#  define DEBOUNCE 5
-#endif
-
 /* matrix state(1:on, 0:off) */
 static matrix_row_t raw_matrix[MATRIX_ROWS];  // raw values
 static matrix_row_t matrix[MATRIX_ROWS];      // debounced values

keyboards/ergodox_stm32/config.h

@@ -33,3 +33,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     keyboard_report->mods == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \
     keyboard_report->mods == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
 )
+
+// i2c_master driver config
+#define I2C1_CLOCK_SPEED 400000
+#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2

keyboards/exent/config.h

@@ -0,0 +1,53 @@
+/*
+Copyright 2019 mechmerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+#define VENDOR_ID 0x20A0
+#define PRODUCT_ID 0x422D
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Quadcube
+#define PRODUCT Exent
+#define DESCRIPTION 65% Keyboard
+
+#define RGBLED_NUM 18
+
+#define MATRIX_ROWS 7
+#define MATRIX_COLS 14
+
+//                         0   1   2   3   4   5   6   7   8   9   A   B   C   D
+#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6 }
+#define MATRIX_COL_PINS { D7, C2, C3, C4, C5, C6, C7, A7, A6, A5, A4, A3, A1, A0 }
+#define UNUSED_PINS 
+
+#define DIODE_DIRECTION COL2ROW
+#define DEBOUNCE 5
+
+#define BACKLIGHT_LEVELS 1
+#define RGBLIGHT_ANIMATIONS
+
+#define NO_UART 1
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/exent/exent.c

@@ -0,0 +1,90 @@
+/* Copyright 2019 mechmerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "exent.h"
+
+#ifdef RGBLIGHT_ENABLE
+
+#    include <string.h>
+#    include "i2c_master.h"
+#    include "rgblight.h"
+
+extern rgblight_config_t rgblight_config;
+
+void matrix_init_kb(void) {
+    i2c_init();
+    // call user level keymaps, if any
+    matrix_init_user();
+}
+
+// custom RGB driver
+void rgblight_set(void) {
+    if (!rgblight_config.enable) {
+        memset(led, 0, 3 * RGBLED_NUM);
+    }
+
+    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
+}
+
+bool rgb_init = false;
+
+void matrix_scan_kb(void) {
+    // if LEDs were previously on before poweroff, turn them back on
+    if (rgb_init == false && rgblight_config.enable) {
+        i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
+        rgb_init = true;
+    }
+
+    rgblight_task();
+    matrix_scan_user();
+}
+
+#endif
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+/*
+
+void matrix_init_kb(void) {
+  // put your keyboard start-up code here
+  // runs once when the firmware starts up
+
+  matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+  // put your looping keyboard code here
+  // runs every cycle (a lot)
+
+  matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+  // put your per-action keyboard code here
+  // runs for every action, just before processing by the firmware
+
+  return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+  led_set_user(usb_led);
+}
+
+*/

keyboards/exent/exent.h

@@ -0,0 +1,68 @@
+/* Copyright 2019 mechmerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define ___ KC_NO
+
+#define LAYOUT_all( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k6d, k53,  \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k52,       \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k51,       \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k50,       \
+    k40, k41, k42, k44, k45, k46, k47, k48, k49, k4b, k4c, k4d                       \
+){ \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d },  \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d },  \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d },  \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d },  \
+    { k40, k41, k42, ___, k44, k45, k46, k47, k48, k49, ___, k4b, k4c, k4d },  \
+    { k50, k51, k52, k53, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ },  \
+    { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k6d }   \
+}
+
+#define LAYOUT_65_ansi( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k53,  \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k52,  \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k51,       \
+    k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k50,       \
+    k40, k41, k42, k45, k47, k48, k49, k4b, k4c, k4d                            \
+){ \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d },  \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d },  \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, ___, k2d },  \
+    { k30, ___, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d },  \
+    { k40, k41, k42, ___, ___, k45, ___, k47, k48, k49, ___, k4b, k4c, k4d },  \
+    { k50, k51, k52, k53, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ },  \
+    { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }   \
+}
+
+#define LAYOUT_65_iso( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k53,  \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c,  k52,      \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k51,  \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k50,  \
+    k40, k41, k42, k45, k47, k48, k49, k4b, k4c, k4d                            \
+){ \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d },  \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, ___ },  \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d },  \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d },  \
+    { k40, k41, k42, ___, ___, k45, ___, k47, k48, k49, ___, k4b, k4c, k4d },  \
+    { k50, k51, k52, k53, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ },  \
+    { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }   \
+}

keyboards/exent/info.json

@@ -0,0 +1,20 @@
+{
+    "keyboard_name": "Exent", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 16, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":13.75, "y":2, "w":1.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
+        }, 
+
+        "LAYOUT_65_ansi": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
+        },
+
+        "LAYOUT_65_iso": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":13.75, "y":1, "w":1.25, "h":2}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
+        }
+    }
+}

keyboards/exent/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 mechmerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/exent/keymaps/default/keymap.c

@@ -0,0 +1,18 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* layer 0: qwerty */
+    [0] = LAYOUT_65_ansi(
+        KC_ESC,  KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_HOME,
+        KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
+        KC_CAPS, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_PGDN,
+        KC_LSFT, KC_Z,    KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,          KC_UP,   KC_END,
+        KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC,                                  MO(1), KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), 
+
+    [1] = LAYOUT_65_ansi(
+        KC_GRV,  KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_TRNS,
+        BL_TOGG, BL_STEP,  BL_INC,  BL_DEC,  RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        RGB_TOG, RGB_MOD,  RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS,  KC_TRNS,                KC_TRNS,                               KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), 
+    };

keyboards/exent/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for exent

keyboards/exent/readme.md

@@ -0,0 +1,19 @@
+# exent
+
+65% custom keyboard with large bezels. 
+
+Keyboard Maintainer: [mechmerlin](https://github.com/mechmerlin)  
+Hardware Supported: Exent PCB  
+Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=87213.0)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make exent:default
+
+Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](flashing_bootloadhid.md))
+
+    make exent:default:flash
+
+**Reset Key**: Hold down the key located at `k0d`, commonly programmed as Backspace while plugging in the keyboard.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/exent/rules.mk

@@ -0,0 +1,28 @@
+# MCU name
+MCU = atmega32a
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = bootloadHID
+
+# build options
+BOOTMAGIC_ENABLE = no
+MOUSEKEY_ENABLE = no
+EXTRAKEY_ENABLE = yes
+CONSOLE_ENABLE = yes
+COMMAND_ENABLE = yes
+BACKLIGHT_ENABLE = no
+RGBLIGHT_ENABLE = yes
+RGBLIGHT_CUSTOM_DRIVER = yes
+
+OPT_DEFS = -DDEBUG_LEVEL=0
+
+SRC += i2c_master.c
+
+LAYOUTS = 65_ansi 65_iso

keyboards/exent/usbconfig.h

@@ -0,0 +1,383 @@
+#pragma once
+
+#include "config.h"
+
+/*
+General Description:
+This file is an example configuration (with inline documentation) for the USB
+driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
+also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
+wire the lines to any other port, as long as D+ is also wired to INT0 (or any
+other hardware interrupt, as long as it is the highest level interrupt, see
+section at the end of this file).
+*/
+
+/* ---------------------------- Hardware Config ---------------------------- */
+
+#define USB_CFG_IOPORTNAME D
+/* This is the port where the USB bus is connected. When you configure it to
+ * "B", the registers PORTB, PINB and DDRB will be used.
+ */
+#define USB_CFG_DMINUS_BIT 3
+/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
+ * This may be any bit in the port.
+ */
+#define USB_CFG_DPLUS_BIT 2
+/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
+ * This may be any bit in the port. Please note that D+ must also be connected
+ * to interrupt pin INT0! [You can also use other interrupts, see section
+ * "Optional MCU Description" below, or you can connect D- to the interrupt, as
+ * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
+ * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
+ * markers every millisecond.]
+ */
+#define USB_CFG_CLOCK_KHZ (F_CPU / 1000)
+/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
+ * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
+ * require no crystal, they tolerate +/- 1% deviation from the nominal
+ * frequency. All other rates require a precision of 2000 ppm and thus a
+ * crystal!
+ * Since F_CPU should be defined to your actual clock rate anyway, you should
+ * not need to modify this setting.
+ */
+#define USB_CFG_CHECK_CRC 0
+/* Define this to 1 if you want that the driver checks integrity of incoming
+ * data packets (CRC checks). CRC checks cost quite a bit of code size and are
+ * currently only available for 18 MHz crystal clock. You must choose
+ * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
+ */
+
+/* ----------------------- Optional Hardware Config ------------------------ */
+
+/* #define USB_CFG_PULLUP_IOPORTNAME   D */
+/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
+ * V+, you can connect and disconnect the device from firmware by calling
+ * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
+ * This constant defines the port on which the pullup resistor is connected.
+ */
+/* #define USB_CFG_PULLUP_BIT          4 */
+/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
+ * above) where the 1.5k pullup resistor is connected. See description
+ * above for details.
+ */
+
+/* --------------------------- Functional Range ---------------------------- */
+
+#define USB_CFG_HAVE_INTRIN_ENDPOINT 1
+/* Define this to 1 if you want to compile a version with two endpoints: The
+ * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
+ * number).
+ */
+#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1
+/* Define this to 1 if you want to compile a version with three endpoints: The
+ * default control endpoint 0, an interrupt-in endpoint 3 (or the number
+ * configured below) and a catch-all default interrupt-in endpoint as above.
+ * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
+ */
+#define USB_CFG_EP3_NUMBER 3
+/* If the so-called endpoint 3 is used, it can now be configured to any other
+ * endpoint number (except 0) with this macro. Default if undefined is 3.
+ */
+/* #define USB_INITIAL_DATATOKEN           USBPID_DATA1 */
+/* The above macro defines the startup condition for data toggling on the
+ * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
+ * Since the token is toggled BEFORE sending any data, the first packet is
+ * sent with the oposite value of this configuration!
+ */
+#define USB_CFG_IMPLEMENT_HALT 0
+/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
+ * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
+ * it is required by the standard. We have made it a config option because it
+ * bloats the code considerably.
+ */
+#define USB_CFG_SUPPRESS_INTR_CODE 0
+/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
+ * want to send any data over them. If this macro is defined to 1, functions
+ * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
+ * you need the interrupt-in endpoints in order to comply to an interface
+ * (e.g. HID), but never want to send any data. This option saves a couple
+ * of bytes in flash memory and the transmit buffers in RAM.
+ */
+#define USB_CFG_INTR_POLL_INTERVAL 1
+/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
+ * interval. The value is in milliseconds and must not be less than 10 ms for
+ * low speed devices.
+ */
+#define USB_CFG_IS_SELF_POWERED 0
+/* Define this to 1 if the device has its own power supply. Set it to 0 if the
+ * device is powered from the USB bus.
+ */
+#define USB_CFG_MAX_BUS_POWER 500
+/* Set this variable to the maximum USB bus power consumption of your device.
+ * The value is in milliamperes. [It will be divided by two since USB
+ * communicates power requirements in units of 2 mA.]
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITE 1
+/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
+ * transfers. Set it to 0 if you don't need it and want to save a couple of
+ * bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_READ 0
+/* Set this to 1 if you need to send control replies which are generated
+ * "on the fly" when usbFunctionRead() is called. If you only want to send
+ * data from a static buffer, set it to 0 and return the data from
+ * usbFunctionSetup(). This saves a couple of bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0
+/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
+ * You must implement the function usbFunctionWriteOut() which receives all
+ * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
+ * can be found in 'usbRxToken'.
+ */
+#define USB_CFG_HAVE_FLOWCONTROL 0
+/* Define this to 1 if you want flowcontrol over USB data. See the definition
+ * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
+ * usbdrv.h.
+ */
+#define USB_CFG_DRIVER_FLASH_PAGE 0
+/* If the device has more than 64 kBytes of flash, define this to the 64 k page
+ * where the driver's constants (descriptors) are located. Or in other words:
+ * Define this to 1 for boot loaders on the ATMega128.
+ */
+#define USB_CFG_LONG_TRANSFERS 0
+/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
+ * in a single control-in or control-out transfer. Note that the capability
+ * for long transfers increases the driver size.
+ */
+/* #define USB_RX_USER_HOOK(data, len)     if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
+/* This macro is a hook if you want to do unconventional things. If it is
+ * defined, it's inserted at the beginning of received message processing.
+ * If you eat the received message and don't want default processing to
+ * proceed, do a return after doing your things. One possible application
+ * (besides debugging) is to flash a status LED on each packet.
+ */
+/* #define USB_RESET_HOOK(resetStarts)     if(!resetStarts){hadUsbReset();} */
+/* This macro is a hook if you need to know when an USB RESET occurs. It has
+ * one parameter which distinguishes between the start of RESET state and its
+ * end.
+ */
+/* #define USB_SET_ADDRESS_HOOK()              hadAddressAssigned(); */
+/* This macro (if defined) is executed when a USB SET_ADDRESS request was
+ * received.
+ */
+#define USB_COUNT_SOF 1
+/* define this macro to 1 if you need the global variable "usbSofCount" which
+ * counts SOF packets. This feature requires that the hardware interrupt is
+ * connected to D- instead of D+.
+ */
+/* #ifdef __ASSEMBLER__
+ * macro myAssemblerMacro
+ *     in      YL, TCNT0
+ *     sts     timer0Snapshot, YL
+ *     endm
+ * #endif
+ * #define USB_SOF_HOOK                    myAssemblerMacro
+ * This macro (if defined) is executed in the assembler module when a
+ * Start Of Frame condition is detected. It is recommended to define it to
+ * the name of an assembler macro which is defined here as well so that more
+ * than one assembler instruction can be used. The macro may use the register
+ * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
+ * immediately after an SOF pulse may be lost and must be retried by the host.
+ * What can you do with this hook? Since the SOF signal occurs exactly every
+ * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
+ * designs running on the internal RC oscillator.
+ * Please note that Start Of Frame detection works only if D- is wired to the
+ * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
+ */
+#define USB_CFG_CHECK_DATA_TOGGLING 0
+/* define this macro to 1 if you want to filter out duplicate data packets
+ * sent by the host. Duplicates occur only as a consequence of communication
+ * errors, when the host does not receive an ACK. Please note that you need to
+ * implement the filtering yourself in usbFunctionWriteOut() and
+ * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
+ * for each control- and out-endpoint to check for duplicate packets.
+ */
+#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0
+/* define this macro to 1 if you want the function usbMeasureFrameLength()
+ * compiled in. This function can be used to calibrate the AVR's RC oscillator.
+ */
+#define USB_USE_FAST_CRC 0
+/* The assembler module has two implementations for the CRC algorithm. One is
+ * faster, the other is smaller. This CRC routine is only used for transmitted
+ * messages where timing is not critical. The faster routine needs 31 cycles
+ * per byte while the smaller one needs 61 to 69 cycles. The faster routine
+ * may be worth the 32 bytes bigger code size if you transmit lots of data and
+ * run the AVR close to its limit.
+ */
+
+/* -------------------------- Device Description --------------------------- */
+
+#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
+/* USB vendor ID for the device, low byte first. If you have registered your
+ * own Vendor ID, define it here. Otherwise you may use one of obdev's free
+ * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
+/* This is the ID of the product, low byte first. It is interpreted in the
+ * scope of the vendor ID. If you have registered your own VID with usb.org
+ * or if you have licensed a PID from somebody else, define it here. Otherwise
+ * you may use one of obdev's free shared VID/PID pairs. See the file
+ * USB-IDs-for-free.txt for details!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_VERSION 0x00, 0x02
+/* Version number of the device: Minor number first, then major number.
+ */
+#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
+#define USB_CFG_VENDOR_NAME_LEN 13
+/* These two values define the vendor name returned by the USB device. The name
+ * must be given as a list of characters under single quotes. The characters
+ * are interpreted as Unicode (UTF-16) entities.
+ * If you don't want a vendor name string, undefine these macros.
+ * ALWAYS define a vendor name containing your Internet domain name if you use
+ * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
+ * details.
+ */
+#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B'
+#define USB_CFG_DEVICE_NAME_LEN 8
+/* Same as above for the device name. If you don't want a device name, undefine
+ * the macros. See the file USB-IDs-for-free.txt before you assign a name if
+ * you use a shared VID/PID.
+ */
+/*#define USB_CFG_SERIAL_NUMBER   'N', 'o', 'n', 'e' */
+/*#define USB_CFG_SERIAL_NUMBER_LEN   0 */
+/* Same as above for the serial number. If you don't want a serial number,
+ * undefine the macros.
+ * It may be useful to provide the serial number through other means than at
+ * compile time. See the section about descriptor properties below for how
+ * to fine tune control over USB descriptors such as the string descriptor
+ * for the serial number.
+ */
+#define USB_CFG_DEVICE_CLASS 0
+#define USB_CFG_DEVICE_SUBCLASS 0
+/* See USB specification if you want to conform to an existing device class.
+ * Class 0xff is "vendor specific".
+ */
+#define USB_CFG_INTERFACE_CLASS 3    /* HID */
+#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */
+#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */
+/* See USB specification if you want to conform to an existing device class or
+ * protocol. The following classes must be set at interface level:
+ * HID class is 3, no subclass and protocol required (but may be useful!)
+ * CDC class is 2, use subclass 2 and protocol 1 for ACM
+ */
+#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0
+/* Define this to the length of the HID report descriptor, if you implement
+ * an HID device. Otherwise don't define it or define it to 0.
+ * If you use this define, you must add a PROGMEM character array named
+ * "usbHidReportDescriptor" to your code which contains the report descriptor.
+ * Don't forget to keep the array and this define in sync!
+ */
+
+/* #define USB_PUBLIC static */
+/* Use the define above if you #include usbdrv.c instead of linking against it.
+ * This technique saves a couple of bytes in flash memory.
+ */
+
+/* ------------------- Fine Control over USB Descriptors ------------------- */
+/* If you don't want to use the driver's default USB descriptors, you can
+ * provide our own. These can be provided as (1) fixed length static data in
+ * flash memory, (2) fixed length static data in RAM or (3) dynamically at
+ * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
+ * information about this function.
+ * Descriptor handling is configured through the descriptor's properties. If
+ * no properties are defined or if they are 0, the default descriptor is used.
+ * Possible properties are:
+ *   + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
+ *     at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
+ *     used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
+ *     you want RAM pointers.
+ *   + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
+ *     in static memory is in RAM, not in flash memory.
+ *   + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
+ *     the driver must know the descriptor's length. The descriptor itself is
+ *     found at the address of a well known identifier (see below).
+ * List of static descriptor names (must be declared PROGMEM if in flash):
+ *   char usbDescriptorDevice[];
+ *   char usbDescriptorConfiguration[];
+ *   char usbDescriptorHidReport[];
+ *   char usbDescriptorString0[];
+ *   int usbDescriptorStringVendor[];
+ *   int usbDescriptorStringDevice[];
+ *   int usbDescriptorStringSerialNumber[];
+ * Other descriptors can't be provided statically, they must be provided
+ * dynamically at runtime.
+ *
+ * Descriptor properties are or-ed or added together, e.g.:
+ * #define USB_CFG_DESCR_PROPS_DEVICE   (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
+ *
+ * The following descriptors are defined:
+ *   USB_CFG_DESCR_PROPS_DEVICE
+ *   USB_CFG_DESCR_PROPS_CONFIGURATION
+ *   USB_CFG_DESCR_PROPS_STRINGS
+ *   USB_CFG_DESCR_PROPS_STRING_0
+ *   USB_CFG_DESCR_PROPS_STRING_VENDOR
+ *   USB_CFG_DESCR_PROPS_STRING_PRODUCT
+ *   USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
+ *   USB_CFG_DESCR_PROPS_HID
+ *   USB_CFG_DESCR_PROPS_HID_REPORT
+ *   USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
+ *
+ * Note about string descriptors: String descriptors are not just strings, they
+ * are Unicode strings prefixed with a 2 byte header. Example:
+ * int  serialNumberDescriptor[] = {
+ *     USB_STRING_DESCRIPTOR_HEADER(6),
+ *     'S', 'e', 'r', 'i', 'a', 'l'
+ * };
+ */
+
+#define USB_CFG_DESCR_PROPS_DEVICE 0
+#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_CONFIGURATION           0
+#define USB_CFG_DESCR_PROPS_STRINGS 0
+#define USB_CFG_DESCR_PROPS_STRING_0 0
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID                     0
+#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID_REPORT              0
+#define USB_CFG_DESCR_PROPS_UNKNOWN 0
+
+#define usbMsgPtr_t unsigned short
+/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to
+ * a scalar type here because gcc generates slightly shorter code for scalar
+ * arithmetics than for pointer arithmetics. Remove this define for backward
+ * type compatibility or define it to an 8 bit type if you use data in RAM only
+ * and all RAM is below 256 bytes (tiny memory model in IAR CC).
+ */
+
+/* ----------------------- Optional MCU Description ------------------------ */
+
+/* The following configurations have working defaults in usbdrv.h. You
+ * usually don't need to set them explicitly. Only if you want to run
+ * the driver on a device which is not yet supported or with a compiler
+ * which is not fully supported (such as IAR C) or if you use a differnt
+ * interrupt than INT0, you may have to define some of these.
+ */
+/* #define USB_INTR_CFG            MCUCR */
+/* #define USB_INTR_CFG_SET        ((1 << ISC00) | (1 << ISC01)) */
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         GIMSK */
+/* #define USB_INTR_ENABLE_BIT     INT0 */
+/* #define USB_INTR_PENDING        GIFR */
+/* #define USB_INTR_PENDING_BIT    INTF0 */
+/* #define USB_INTR_VECTOR         INT0_vect */
+
+/* Set INT1 for D- falling edge to count SOF */
+/* #define USB_INTR_CFG            EICRA */
+#define USB_INTR_CFG_SET ((1 << ISC11) | (0 << ISC10))
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         EIMSK */
+#define USB_INTR_ENABLE_BIT INT1
+/* #define USB_INTR_PENDING        EIFR */
+#define USB_INTR_PENDING_BIT INTF1
+#define USB_INTR_VECTOR INT1_vect

keyboards/fc660c/rules.mk

@@ -11,7 +11,6 @@ MCU = atmega32u4
 #   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
-
 # Build Options
 #   comment out to disable the options.
 #

keyboards/geekboards/tester/rules.mk

@@ -1,52 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-# project specific files
-#SRC =
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = qmk-dfu
 
-# Do not put the microcontroller into power saving mode
-# when we get USB suspend event. We want it to keep updating
-# backlight effects.
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/georgi/rules.mk

@@ -1,18 +1,15 @@
-#----------------------------------------------------------------------------
-# make georgi:default:dfu
-# Make sure you have dfu-programmer installed!
-# Do not edit this file! Make a copy of keymaps/default and modify that!
-#----------------------------------------------------------------------------
-# Source includes
-SRC += matrix.c i2c_master.c sten.c
-
-# Hardware info
+# MCU name
 MCU = atmega32u4
-F_CPU = 16000000
-ARCH = AVR8
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
-F_USB = $(F_CPU)
-EXTRAFLAGS += -flto
 
 CUSTOM_MATRIX 		= yes
 MOUSEKEY_ENABLE		= no
@@ -21,3 +18,6 @@ EXTRAKEY_ENABLE     = yes
 CONSOLE_ENABLE      = yes
 COMMAND_ENABLE      = no
 NKRO_ENABLE			= yes
+
+EXTRAFLAGS += -flto
+SRC += matrix.c i2c_master.c sten.c

keyboards/gergo/rules.mk

@@ -1,18 +1,15 @@
-#----------------------------------------------------------------------------
-# make gergo:germ:dfu
-# Make sure you have dfu-programmer installed!
-# Do not edit this file! Make a copy of keymaps/default and modify that!
-#----------------------------------------------------------------------------
-# Source includes
-SRC += matrix.c 
-QUANTUM_LIB_SRC += i2c_master.c
-
-# Hardware info
+# MCU name
 MCU = atmega32u4
-F_CPU = 16000000
-ARCH = AVR8
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
-F_USB = $(F_CPU)
 
 CUSTOM_MATRIX 		= yes
 EXTRAKEY_ENABLE		= yes
@@ -21,3 +18,5 @@ COMMAND_ENABLE		= yes
 BOOTMAGIC_ENABLE = lite
 
 DEBOUNCE_TYPE  = eager_pr
+SRC += matrix.c
+QUANTUM_LIB_SRC += i2c_master.c

keyboards/gh60/revc/rules.mk

@@ -1,51 +1,15 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
 
 # Build Options
 #   comment out to disable the options.

keyboards/gh60/satan/rules.mk

@@ -1,48 +1,15 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
 
 # Build Options
 #   comment out to disable the options.

keyboards/gh80_3000/rules.mk

@@ -1,45 +1,15 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
 
 # Build Options
 #   comment out to disable the options.

keyboards/gonnerd/rules.mk

@@ -1,51 +1,18 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
+# Processor frequency
 F_CPU = 8000000
 
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
 
 # Build Options
 #   change yes to no to disable

keyboards/gray_studio/cod67/rules.mk

@@ -1,51 +1,15 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = lufa-ms
 
 # Build Options
 #   change yes to no to disable

keyboards/gray_studio/space65/info.json

@@ -5,8 +5,12 @@
     "width": 16, 
     "height": 5, 
     "layouts": {
-        "LAYOUT_65_ansi_blocker": {
+        "LAYOUT": {
             "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
+        },
+
+        "LAYOUT_65_ansi_blocker": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
         }
     }
-}
+}

keyboards/gray_studio/space65/rules.mk

@@ -1,63 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   change yes to no to disable
 #
@@ -79,4 +32,4 @@ AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
 
-LAYOUTS = 65_ansi_blocker
+LAYOUTS = 65_ansi_blocker

keyboards/grid600/press/rules.mk

@@ -1,63 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/gskt00/rules.mk

@@ -1,41 +1,14 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
 # Build Options

keyboards/handwired/splittest/teensy_2/config.h

@@ -27,5 +27,7 @@
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
 
+// teensy has vbus detection issues - use usb detection instead
+#define SPLIT_USB_DETECT
 // required for teensy slave otherwise it "locks up" during startup
 #define NO_USB_STARTUP_CHECK

keyboards/handwired/splittest/teensy_2/teensy_2.c

@@ -1,14 +0,0 @@
-#include QMK_KEYBOARD_H
-
-bool is_keyboard_master(void) {
-    // TODO: replace this override once USB host detection is implemented
-    // SPLIT_HAND_PIN Combined with MASTER_LEFT or MASTER_RIGHT, gives a crude
-    // way to force teensy to run as slave/master
-    setPinInput(SPLIT_HAND_PIN);
-
-#if defined(MASTER_RIGHT)
-    return !readPin(SPLIT_HAND_PIN);
-#else
-    return readPin(SPLIT_HAND_PIN);
-#endif
-}

keyboards/keebio/iris/keymaps/gary/README.md

@@ -0,0 +1,18 @@
+# Gary's Iris Layout
+
+My personal keymap for my Iris.
+
+Copyright 2019 Gary @garyjzhao
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.

keyboards/keebio/iris/keymaps/gary/config.h

@@ -0,0 +1,12 @@
+#pragma once
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS

keyboards/keebio/iris/keymaps/gary/keymap.c

@@ -0,0 +1,47 @@
+#include "gary.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = LAYOUT_kc(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+     ESC , 1  , 2  , 3  , 4  , 5  ,                6  , 7  , 8  , 9  , 0  ,BSPC,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     TAB , Q  , W  , E  , R  , T  ,                Y  , U  , I  , O  , P  ,DEL ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     RASE, A  , S  , D  , F  , G  ,                H  , J  , K  , L  ,SCLN,QUOT,
+  //|----+----+----+----   +----+----+----.    ,----|----+----+----+----+----+----|
+     LSFT, Z  , X  , C  , V  , B  ,NEXT,     FULL , N  , M  ,COMM,DOT ,SLSH,SFTENT,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                       LGUI,LOWR,SPC ,        GARY, ENT,LALT
+  //                  `----+----+----'        `----+----+----'
+  ),
+
+
+  [_LOWER] = LAYOUT_kc(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+    GRV ,EXLM, AT ,HASH,DLR ,PERC,                CIRC,AMPR,ASTR,LPRN,RPRN,BSPC,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     CLTB,    ,CNTR,UPLF,UPRG,    ,                   ,    ,PLUS,LBRC,RBRC,OPASS,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+         ,LHLF,RHLF,DNLF,DNRG,    ,                   ,    ,MINS,    ,    ,PIPE,
+  //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|`
+         ,    ,    ,CTLC,    ,    ,    ,         ,    ,    ,    ,EQL ,    ,UNDS ,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                           ,    ,DEL ,        BSPC ,    ,
+  //                  `----+----+----'        `----+----+----'
+  ),
+
+  [_RAISE] = LAYOUT_kc(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+     TILD, F1 , F2 , F3 ,SHOT, F5 ,                F6 , F7 , F8 , F9 ,F10 ,F11 ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+         ,MPRV,MPLY,MNXT,    ,    ,                   ,PGUP, UP ,PGDN,    ,    ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+         ,    ,VOLD,VOLU,MUTE,    ,                   ,LEFT,DOWN,RGHT,    ,    ,
+  //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,    ,      RST,    ,    ,    ,    ,    ,    ,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                            ,LALT,    ,             ,    ,
+  //                  `----+----+----'        `----+----+----'
+  ),
+};

keyboards/keebio/iris/keymaps/gary/rules.mk

@@ -0,0 +1,2 @@
+RGBLIGHT_ENABLE = no
+EXTRAKEY_ENABLE = yes

keyboards/kingly_keys/little_foot/config.h

@@ -0,0 +1,58 @@
+/* Copyright 2019 Garret G. (TheRoyalSweatshirt)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.#pragma once 
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Kingly-Keys
+#define PRODUCT         The Little Foot
+#define DESCRIPTION     A Mighty Small, 45-Percent, Ortholinear Keyboard.
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 10
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { F6, B6, B2, B3, B1 }
+#define MATRIX_COL_PINS { F5, F7, B5, B4, E6, D7, C6, D4, D0, D1 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+#define FORCE_NKRO
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN F4
+#define RGBLED_NUM 10    // Number of LEDs
+
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_HUE_STEP 6
+#define RGBLIGHT_SAT_STEP 4
+#define RGBLIGHT_VAL_STEP 8

keyboards/kingly_keys/little_foot/info.json

@@ -0,0 +1,17 @@
+{
+  "keyboard_name": "Little Foot",
+  "url": "",
+  "maintainer": "TheRoyalSweatshirt",
+  "width": 10,
+  "height": 5,
+  "layouts": {
+    "LAYOUT_split_space_base": {
+      "key_count": 44,
+      "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":1.5, "y":4, "w":1.5}, {"x":3, "y":4, "w":2}, {"x":5, "y":4, "w":2}, {"x":7, "y":4, "w":1.5}]
+    },
+    "LAYOUT_big_space_base": {
+      "key_count": 41,
+      "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":1.5, "y":4, "w":7}]
+    }
+  }
+}

keyboards/kingly_keys/little_foot/keymaps/default/keymap.c

@@ -0,0 +1,40 @@
+
+#include QMK_KEYBOARD_H
+
+// Layer names
+enum{
+  // - Base layer:
+  _BASE,
+  // - Symbols, numbers, and functions:
+  _FN,
+  // - Alternate Function layer:
+  _LN
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_BASE] = LAYOUT_split_space_base(
+    KC_1,   KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,             KC_0,
+    KC_Q,   KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,             KC_P,
+    KC_A,   KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,          KC_SCLN,
+    KC_Z,   KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,         KC_ENT,
+                MO(_FN),          KC_LSHIFT,          KC_SPACE,                 RGB_MOD
+  ),
+
+  [_FN] = LAYOUT_split_space_base(
+    LT(_LN, KC_ESC), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_MINS, KC_BSPC,
+    KC_TAB,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, LSFT(KC_MINS),    KC_BSLS,
+    KC_LSFT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC,          KC_QUOT,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,   KC_TRNS, KC_TRNS,          KC_TRNS,
+                  KC_TRNS,            KC_LALT,        KC_TRNS,              KC_LCTRL
+  ), 
+
+  [_LN] = LAYOUT_split_space_base(
+    KC_TRNS,   KC_F1,   KC_F2,  KC_F3,    KC_TRNS,    KC_TRNS,   KC_TRNS,    KC_7,    KC_8,    KC_9,
+    KC_TRNS,   KC_F4,   KC_F5,  KC_F6,    KC_TRNS,    KC_TRNS,   KC_TRNS,    KC_4,    KC_5,    KC_6,
+    KC_TRNS,   KC_F7,   KC_F8,  KC_F9,    KC_TRNS,    KC_TRNS,   KC_TRNS,    KC_1,    KC_2,    KC_3,
+    KC_TRNS,   KC_F10,  KC_F11, KC_F12,   KC_TRNS,    KC_TRNS,   KC_TRNS,   KC_TRNS,  KC_0, KC_TRNS,
+                  KC_TRNS,             KC_TRNS,          KC_TRNS,                KC_TRNS
+  )
+};

keyboards/kingly_keys/little_foot/little_foot.c

@@ -0,0 +1 @@
+#include "little_foot.h"

keyboards/kingly_keys/little_foot/little_foot.h

@@ -0,0 +1,35 @@
+#pragma once
+
+#include "quantum.h"
+
+#define XXX KC_NO
+
+#define LAYOUT_split_space_base( \
+    k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, \
+    k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, \
+    k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, \
+    k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, \
+         k42,        k46,      k47,         k49        \
+) \
+{ \
+    { k01, k02, k03, k04, k05, k06, k07, k08, k09, k010 }, \
+    { k11, k12, k13, k14, k15, k16, k17, k18, k19, k110 }, \
+    { k21, k22, k23, k24, k25, k26, k27, k28, k29, k210 }, \
+    { k31, k32, k33, k34, k35, k36, k37, k38, k39, k310 }, \
+    { XXX, k42, XXX, XXX, XXX, k46, k47, XXX, k49, XXX  }  \
+}
+
+#define LAYOUT_big_space_base( \
+    k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, \
+    k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, \
+    k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, \
+    k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, \
+                           k46                         \
+) \
+{ \
+    { k01, k02, k03, k04, k05, k06, k07, k08, k09, k010 }, \
+    { k11, k12, k13, k14, k15, k16, k17, k18, k19, k110 }, \
+    { k21, k22, k23, k24, k25, k26, k27, k28, k29, k210 }, \
+    { k31, k32, k33, k34, k35, k36, k37, k38, k39, k310 }, \
+    { XXX, k42, XXX, XXX, XXX, k46, XXX, XXX, k49, XXX  }  \
+}

keyboards/kingly_keys/little_foot/readme.md

@@ -0,0 +1,17 @@
+# Little Foot
+
+![Little_Foot](https://i.imgur.com/M0Usdtg.jpg)
+===
+
+A mighty small keyboard.
+
+Keyboard Maintainer: Garret G. - a.k.a. [The_Royal](https://www.reddit.com/user/The_Royal/) on Reddit, and [TheRoyalSweatshirt](https://github.com/TheRoyalSweatshirt) on GitHub
+Hardware Supported: Little_Foot Rev1.2 & Rev1.4, Pro-Micro, and Elite-C  
+Hardware Availability: Through GB or Direct Message 
+
+Make example for this keyboard (after setting up your build environment):
+
+    make kingly_keys/little_foot:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+

keyboards/kingly_keys/little_foot/rules.mk

@@ -0,0 +1,25 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = lite	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	    # Console for debug(+400)
+COMMAND_ENABLE = no     # Commands for debug and configuration
+SLEEP_LED_ENABLE = no   # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes

keyboards/kingly_keys/romac/keymaps/default/keymap.c

@@ -25,13 +25,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_7, KC_8, KC_9, \
 		KC_4, KC_5, KC_6, \
 		KC_1, KC_2, KC_3, \
-		MO(_FN1), KC_0, KC_ENT \
+		MO(1), KC_0, KC_DOT \
 	),
   
 	[_FN1] = LAYOUT(
 		KC_TRNS, KC_HOME, KC_PGUP, \
 		KC_TRNS, KC_END, KC_PGDN, \
 		KC_TRNS, KC_TRNS, KC_TRNS, \
-		KC_TRNS, KC_TRNS, KC_DOT \
+		KC_TRNS, KC_TRNS, KC_ENT \
 	)
 };

keyboards/kingly_keys/romac/rules.mk

@@ -0,0 +1,26 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = full	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = no
+