fix unselect_rows() in quantum/matrix.c (#6243)

unselect_col() uses setPinInputHigh(), but unselect_cols() uses setPinInput().
This is not correct. unselect_cols() should also use setPinInputHigh().

docs/config_options.md

@@ -80,7 +80,7 @@ This is a C header file that is one of the first things included, and will persi
 * `#define BACKLIGHT_LEVELS 3`
   * number of levels your backlight will have (maximum 15 excluding off)
 * `#define BACKLIGHT_BREATHING`
-  * enables backlight breathing (only works with backlight pins B5, B6 and B7)
+  * enables backlight breathing
 * `#define BREATHING_PERIOD 6`
   * the length of one backlight "breath" in seconds
 * `#define DEBOUNCE 5`

docs/feature_advanced_keycodes.md

@@ -256,10 +256,10 @@ If you press a Mod Tap key, tap another key (press and release) and then release
 
 For Instance:
 
-- `SHFT_T(KC_A)` Down
+- `SFT_T(KC_A)` Down
 - `KC_X` Down
 - `KC_X` Up
-- `SHFT_T(KC_A)` Up
+- `SFT_T(KC_A)` Up
 
 Normally, if you do all this within the `TAPPING_TERM` (default: 200ms) this will be registered as `ax` by the firmware and host system. With permissive hold enabled, this modifies how this is handled by considering the Mod Tap keys as a Mod if another key is tapped, and would registered as `X` (`SHIFT`+`x`). 
 
@@ -279,9 +279,9 @@ Setting `Ignore Mod Tap Interrupt` requires  holding both keys for the `TAPPING_
 
 For Instance:
 
-- `SHFT_T(KC_A)` Down
+- `SFT_T(KC_A)` Down
 - `KC_X` Down
-- `SHFT_T(KC_A)` Up
+- `SFT_T(KC_A)` Up
 - `KC_X` Up
 
 Normally, this would send `X` (`SHIFT`+`x`). With `Ignore Mod Tap Interrupt` enabled, holding both keys are required for the `TAPPING_TERM` to register the hold action. A quick tap will output `ax` in this case, while a hold on both will still output `X`  (`SHIFT`+`x`).
@@ -303,11 +303,11 @@ When the user holds a key after tap, this repeats the tapped key rather to hold
 
 Example:
 
-- SHFT_T(KC_A) Down
-- SHFT_T(KC_A) Up
-- SHFT_T(KC_A) Down
+- SFT_T(KC_A) Down
+- SFT_T(KC_A) Up
+- SFT_T(KC_A) Down
 - wait more than tapping term...
-- SHFT_T(KC_A) Up
+- SFT_T(KC_A) Up
 
 With default settings, `a` will be sent on the first release, then `a` will be sent on the second press allowing the computer to trigger its auto repeat function.
 

docs/feature_backlight.md

@@ -64,11 +64,17 @@ To change the behaviour of the backlighting, `#define` these in your `config.h`:
 |Define               |Default      |Description                                                                                                  |
 |---------------------|-------------|-------------------------------------------------------------------------------------------------------------|
 |`BACKLIGHT_PIN`      |`B7`         |The pin that controls the LEDs. Unless you are designing your own keyboard, you shouldn't need to change this|
-|`BACKLIGHT_PINS`     |*Not defined*|experimental: see below for more information|
+|`BACKLIGHT_PINS`     |*Not defined*|experimental: see below for more information                                                                 |
 |`BACKLIGHT_LEVELS`   |`3`          |The number of brightness levels (maximum 15 excluding off)                                                   |
 |`BACKLIGHT_CAPS_LOCK`|*Not defined*|Enable Caps Lock indicator using backlight (for keyboards without dedicated LED)                             |
-|`BACKLIGHT_BREATHING`|*Not defined*|Enable backlight breathing, if supported                                                          |
+|`BACKLIGHT_BREATHING`|*Not defined*|Enable backlight breathing, if supported                                                                     |
 |`BREATHING_PERIOD`   |`6`          |The length of one backlight "breath" in seconds                                                              |
+|`BACKLIGHT_ON_STATE` |`0`          |The state of the backlight pin when the backlight is "on" - `1` for high, `0` for low                        |
+
+## Backlight On State
+
+Most backlight circuits are driven by an N-channel MOSFET or NPN transistor. This means that to turn the transistor *on* and light the LEDs, you must drive the backlight pin, connected to the gate or base, *low*.
+Sometimes, however, a P-channel MOSFET, or a PNP transistor is used. In this case you must `#define BACKLIGHT_ON_STATE 1`, so that when the transistor is on, the pin is driven *high* instead.
 
 ## Multiple backlight pins
 

docs/keycodes.md

@@ -298,7 +298,7 @@ This is a reference only. Each group of keys links to the page documenting their
 |`LM(layer, mod)`|Momentarily turn on `layer` (like MO) with `mod` active as well.  Where `mod` is a mods_bit.  Mods can be viewed [here](https://docs.qmk.fm/#/feature_advanced_keycodes?id=mod-tap).  Example Implementation: `LM(LAYER_1, MOD_LALT)`|
 |`LT(layer, kc)` |Turn on `layer` when held, `kc` when tapped                                       |
 |`TG(layer)`     |Toggle `layer` on or off                                                          |
-|`TO(layer)`     |Turn on `layer` when pressed                                                      |
+|`TO(layer)`     |Turns on `layer` and turns off all other layers, except the default layer |
 |`TT(layer)`     |Normally acts like MO unless it's tapped multiple times, which toggles `layer` on |
 
 ## [Mouse Keys](feature_mouse_keys.md)

keyboards/1upkeyboards/1up60hse/config.h

@@ -59,6 +59,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
+#define RGBLIGHT_SLEEP
 #endif
 
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */

keyboards/aeboards/aegis/config.h

@@ -23,8 +23,8 @@
 #define PRODUCT_ID      0x0807 // 1800 -> 0x0708 -> 0x0807 ;-)
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    AEboards
-#define PRODUCT         Aegis
-#define DESCRIPTION     1800 Left Handed Keyboard
+#define PRODUCT         AEboards Aegis
+#define DESCRIPTION     AEboards Aegis
 
 /* key matrix size */
 #define MATRIX_ROWS 12

keyboards/aeboards/ext65/config.h

@@ -0,0 +1,71 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x4145 // "AE"
+#define PRODUCT_ID      0xAE65 // AEboards EXT65
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    AEboards
+#define PRODUCT         AEboards Ext65
+#define DESCRIPTION     AEboards Ext65
+
+/* key matrix size */
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 10
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { C6, C7, B5, B6, D7, B4, D4, D6, B7, E6 }
+#define MATRIX_COL_PINS { B2, B3, B1, B0, F7, F0, F1, F4, F5, F6 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+//#define WT_MONO_BACKLIGHT
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+
+// EEPROM usage
+
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x08
+#define EEPROM_VERSION_ADDR 34
+
+// Dynamic keymap starts after EEPROM version
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
+// Dynamic macro starts after dynamic keymaps (35+(4*10*10*2)) = (35+800)
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 835
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 189
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16
+

keyboards/aeboards/ext65/ext65.c

@@ -0,0 +1,18 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+// Nothing to see here, move along... ;-)
+

keyboards/aeboards/ext65/ext65.h

@@ -0,0 +1,40 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define ____ KC_NO
+
+#define LAYOUT_ext65( \
+  K000, K100, K001, K101,  K002, K102, K003, K103, K004, K104, K005, K105, K006, K106, K007, K107, K008, K108, K508, K009, \
+  K200, K300, K201, K301,  K202, K302, K203, K303, K204, K304, K205, K305, K206, K306, K207, K307, K208, K308,       K209, \
+  K400, K500, K401, K501,  K402, K502, K403, K503, K404, K504, K405, K505, K406, K506, K407, K507, K408,             K409, \
+  K600, K700, K601, K701,  K602, K702, K603, K703, K604, K704, K605, K705, K606, K706, K607, K708,             K608, K709, \
+  K800, K900, K801, K901,  K802, K902, K803,                   K805,             K906, K807,             K908, K808, K909  \
+) { \
+  { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009 }, \
+  { K100, K101, K102, K103, K104, K105, K106, K107, K108, ____ }, \
+  { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209 }, \
+  { K300, K301, K302, K303, K304, K305, K306, K307, K308, ____ }, \
+  { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409 }, \
+  { K500, K501, K502, K503, K504, K505, K506, K507, K508, ____ }, \
+  { K600, K601, K602, K603, K604, K605, K606, K607, K608, ____ }, \
+  { K700, K701, K702, K703, K704, K705, K706, ____, K708, K709 }, \
+  { K800, K801, K802, K803, ____, K805, ____, K807, K808, ____ }, \
+  { K900, K901, K902, ____, ____, ____, K906, ____, K908, K909 } \
+}

keyboards/aeboards/ext65/keymaps/default/keymap.c

@@ -0,0 +1,104 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap BASE: (Base Layer) Default Layer
+   * ,-------------------.  ,-------------------------------------------------------------------.     
+   * |-   | *  | /  |NmLK|  |Esc| 1 |  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|pipe| ~  | Pscr|
+   * |-------------------|  |-------------------------------------------------------------------| 
+   * |    | 9  | 8  | 7  |  |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]| BSPC  | Del |
+   * |  + |--------------|  |-------------------------------------------------------------------| 
+   * |    | 6  | 5  | 4  |  |Caps   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return   | Pgup|
+   * |-------------------|  |-------------------------------------------------------------------|
+   * |    | 3  | 2  | 1  |  |Shift    |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift | Up | Pgdn|
+   * | ENT|-------------------------------------------------------------------------------------|
+   * |    | .  | 0       |  | Ctrl | Win | Alt |    Space        | FN | Ctrl |  |Left| Dn | Rght|
+   * `------------------------------------------------------------------------------------------'
+   */
+  [0] = LAYOUT_ext65(
+    KC_PMNS, KC_PAST, KC_PSLS, KC_NLCK, KC_ESC , KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , KC_BSLS, KC_GRV , KC_PSCR,
+    KC_PPLS, KC_P9  , KC_P8  , KC_P7  , KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_LBRC, KC_RBRC, KC_BSPC,          KC_DEL ,
+    KC_PPLS, KC_P6  , KC_P5  , KC_P4  , KC_CAPS, KC_A   , KC_S   , KC_D   , KC_F   , KC_G   , KC_H   , KC_J   , KC_K   , KC_L   , KC_SCLN, KC_QUOT, KC_ENT ,                   KC_PGUP,
+    KC_PENT, KC_P3  , KC_P2  , KC_P1  , KC_LSFT, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT,                   KC_UP  , KC_PGDN,
+    KC_PENT, KC_PDOT, KC_P0  , KC_P0  , KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC ,                   MO(1)  , KC_RCTL,                   KC_LEFT, KC_DOWN, KC_RGHT
+  ),
+
+  [1] = LAYOUT_ext65(
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET  ,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS
+  ),
+
+  [2] = LAYOUT_ext65(
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS
+  ),
+
+  [3] = LAYOUT_ext65(
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS
+  )
+};
+
+
+void keyboard_pre_init_user(void) {
+  // Call the keyboard pre init code.
+
+  // Set our LED pins as output
+  setPinOutput(D5);
+  setPinOutput(D3);
+  setPinOutput(D2);
+  setPinOutput(D1);
+}
+
+void led_set_user(uint8_t usb_led) {
+    if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
+        writePinLow(D5);
+    } else {
+        writePinHigh(D5);
+    }
+    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+        writePinLow(D3);
+    } else {
+        writePinHigh(D3);
+    }
+    if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
+        writePinLow(D2);
+    } else {
+        writePinHigh(D2);
+    }
+}
+
+uint32_t layer_state_set_user(uint32_t state) {
+    switch (biton32(state)) {
+      case 1:
+        writePinHigh(D1);
+        break;
+      default: //  for any other layers, or the default layer
+        writePinLow(D1);
+        break;
+      }
+    return state;
+}

keyboards/aeboards/ext65/keymaps/default/readme.md

@@ -0,0 +1,2 @@
+# The Default Ext65 Layout
+

keyboards/aeboards/ext65/keymaps/via/keymap.c

@@ -0,0 +1,103 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap BASE: (Base Layer) Default Layer
+   * ,-------------------.  ,-------------------------------------------------------------------.     
+   * |-   | *  | /  |NmLK|  |Esc| 1 |  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|pipe| ~  | Pscr|
+   * |-------------------|  |-------------------------------------------------------------------| 
+   * |    | 9  | 8  | 7  |  |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]| BSPC  | Del |
+   * |  + |--------------|  |-------------------------------------------------------------------| 
+   * |    | 6  | 5  | 4  |  |Caps   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return   | Pgup|
+   * |-------------------|  |-------------------------------------------------------------------|
+   * |    | 3  | 2  | 1  |  |Shift    |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift | Up | Pgdn|
+   * | ENT|-------------------------------------------------------------------------------------|
+   * |    | .  | 0       |  | Ctrl | Win | Alt |    Space        | FN | Ctrl |  |Left| Dn | Rght|
+   * `------------------------------------------------------------------------------------------'
+   */
+  [0] = LAYOUT_ext65(
+    KC_PMNS, KC_PAST, KC_PSLS, KC_NLCK, KC_ESC , KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , KC_BSLS, KC_GRV , KC_PSCR,
+    KC_PPLS, KC_P9  , KC_P8  , KC_P7  , KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_LBRC, KC_RBRC, KC_BSPC,          KC_DEL ,
+    KC_PPLS, KC_P6  , KC_P5  , KC_P4  , KC_LCTL, KC_A   , KC_S   , KC_D   , KC_F   , KC_G   , KC_H   , KC_J   , KC_K   , KC_L   , KC_SCLN, KC_QUOT, KC_ENT ,                   KC_PGUP,
+    KC_PENT, KC_P3  , KC_P2  , KC_P1  , KC_LSFT, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT,                   KC_UP  , KC_PGDN,
+    KC_PENT, KC_PDOT, KC_P0  , KC_P0  , KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC ,                   MO(1)  , KC_RCTL,                   KC_LEFT, KC_DOWN, KC_RGHT
+  ),
+
+  [1] = LAYOUT_ext65(
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET  ,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS
+  ),
+
+  [2] = LAYOUT_ext65(
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS
+  ),
+
+  [3] = LAYOUT_ext65(
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS
+  )
+};
+
+void keyboard_pre_init_user(void) {
+  // Call the keyboard pre init code.
+
+  // Set our LED pins as output
+  setPinOutput(D5);
+  setPinOutput(D3);
+  setPinOutput(D2);
+  setPinOutput(D1);
+}
+
+void led_set_user(uint8_t usb_led) {
+    if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
+        writePinLow(D5);
+    } else {
+        writePinHigh(D5);
+    }
+    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+        writePinLow(D3);
+    } else {
+        writePinHigh(D3);
+    }
+    if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
+        writePinLow(D2);
+    } else {
+        writePinHigh(D2);
+    }
+}
+
+uint32_t layer_state_set_user(uint32_t state) {
+    switch (biton32(state)) {
+      case 1:
+        writePinHigh(D1);
+        break;
+      default: //  for any other layers, or the default layer
+        writePinLow(D1);
+        break;
+      }
+    return state;
+}

keyboards/aeboards/ext65/keymaps/via/readme.md

@@ -0,0 +1,2 @@
+# The VIA Ext65 Layout
+

keyboards/aeboards/ext65/keymaps/via/rules.mk

@@ -0,0 +1,68 @@
+# project specific files
+SRC =	keyboards/wilba_tech/wt_main.c
+		
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section
+BOOTLOADER = atmel-dfu
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes

keyboards/aeboards/ext65/readme.md

@@ -0,0 +1,14 @@
+EXT65
+===
+
+A southpaw inspired keyboard by [aeboards](https://aeboards.com/)
+
+Keyboard Maintainer: [Xelus22](https://github.com/Xelus22)  
+Hardware Supported: EXT65 
+Hardware Availability: Custom keyboard group buys
+
+Make example for this keyboard (after setting up your build environment):
+
+    make aeboards/ext65:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/aeboards/ext65/rules.mk

@@ -0,0 +1,65 @@
+# project specific files
+SRC =	keyboards/wilba_tech/wt_main.c
+		
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section
+BOOTLOADER = atmel-dfu
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches

keyboards/ai03/quasar/config.h

@@ -0,0 +1,251 @@
+/*
+Copyright 2019 Ryota Goto
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xA103
+#define PRODUCT_ID      0x0010
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Ryota Goto
+#define PRODUCT         Quasar
+#define DESCRIPTION     SSK Controller
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 16
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5, D4, D6, D7 }
+#define MATRIX_COL_PINS { B0, B1, B2, B3, B7, F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/ai03/quasar/info.json

@@ -0,0 +1,97 @@
+{
+    "keyboard_name": "quasar", 
+    "url": "https://github.com/ai03-2725/Quasar/", 
+    "maintainer": "ai03", 
+    "width": 18.5, 
+    "height": 6.75, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+				{"label":"Esc", "x":0, "y":0},
+				{"label":"F1", "x":2, "y":0},
+				{"label":"F2", "x":3, "y":0},
+				{"label":"F3", "x":4, "y":0},
+				{"label":"F4", "x":5, "y":0},
+				{"label":"F5", "x":6.5, "y":0},
+				{"label":"F6", "x":7.5, "y":0},
+				{"label":"F7", "x":8.5, "y":0},
+				{"label":"F8", "x":9.5, "y":0},
+				{"label":"F9", "x":11, "y":0},
+				{"label":"F10", "x":12, "y":0},
+				{"label":"F11", "x":13, "y":0},
+				{"label":"F12", "x":14, "y":0},
+				{"label":"PrtSc", "x":15.5, "y":0},
+				{"label":"Scroll Lock", "x":16.5, "y":0},
+				{"label":"Pause", "x":17.5, "y":0},
+				{"label":"~", "x":0, "y":1.75},
+				{"label":"!", "x":1, "y":1.75},
+				{"label":"@", "x":2, "y":1.75},
+				{"label":"#", "x":3, "y":1.75},
+				{"label":"$", "x":4, "y":1.75},
+				{"label":"%", "x":5, "y":1.75},
+				{"label":"^", "x":6, "y":1.75},
+				{"label":"&", "x":7, "y":1.75},
+				{"label":"*", "x":8, "y":1.75},
+				{"label":"(", "x":9, "y":1.75},
+				{"label":")", "x":10, "y":1.75},
+				{"label":"_", "x":11, "y":1.75},
+				{"label":"+", "x":12, "y":1.75},
+				{"label":"Backspace", "x":13, "y":1.75, "w":2},
+				{"label":"Insert", "x":15.5, "y":1.75},
+				{"label":"Home", "x":16.5, "y":1.75},
+				{"label":"PgUp", "x":17.5, "y":1.75},
+				{"label":"Tab", "x":0, "y":2.75, "w":1.5},
+				{"label":"Q", "x":1.5, "y":2.75},
+				{"label":"W", "x":2.5, "y":2.75},
+				{"label":"E", "x":3.5, "y":2.75},
+				{"label":"R", "x":4.5, "y":2.75},
+				{"label":"T", "x":5.5, "y":2.75},
+				{"label":"Y", "x":6.5, "y":2.75},
+				{"label":"U", "x":7.5, "y":2.75},
+				{"label":"I", "x":8.5, "y":2.75},
+				{"label":"O", "x":9.5, "y":2.75},
+				{"label":"P", "x":10.5, "y":2.75},
+				{"label":"{", "x":11.5, "y":2.75},
+				{"label":"}", "x":12.5, "y":2.75},
+				{"label":"|", "x":13.5, "y":2.75, "w":1.5},
+				{"label":"Delete", "x":15.5, "y":2.75},
+				{"label":"End", "x":16.5, "y":2.75},
+				{"label":"PgDn", "x":17.5, "y":2.75},
+				{"label":"Caps Lock", "x":0, "y":3.75, "w":1.25},
+				{"label":"A", "x":1.75, "y":3.75},
+				{"label":"S", "x":2.75, "y":3.75},
+				{"label":"D", "x":3.75, "y":3.75},
+				{"label":"F", "x":4.75, "y":3.75},
+				{"label":"G", "x":5.75, "y":3.75},
+				{"label":"H", "x":6.75, "y":3.75},
+				{"label":"J", "x":7.75, "y":3.75},
+				{"label":"K", "x":8.75, "y":3.75},
+				{"label":"L", "x":9.75, "y":3.75},
+				{"label":":", "x":10.75, "y":3.75},
+				{"label":"\"", "x":11.75, "y":3.75},
+				{"label":"Enter", "x":12.75, "y":3.75, "w":2.25},
+				{"label":"Shift", "x":0, "y":4.75, "w":2.25},
+				{"label":"Z", "x":2.25, "y":4.75},
+				{"label":"X", "x":3.25, "y":4.75},
+				{"label":"C", "x":4.25, "y":4.75},
+				{"label":"V", "x":5.25, "y":4.75},
+				{"label":"B", "x":6.25, "y":4.75},
+				{"label":"N", "x":7.25, "y":4.75},
+				{"label":"M", "x":8.25, "y":4.75},
+				{"label":"<", "x":9.25, "y":4.75},
+				{"label":">", "x":10.25, "y":4.75},
+				{"label":"?", "x":11.25, "y":4.75},
+				{"label":"Shift", "x":12.25, "y":4.75, "w":2.75},
+				{"label":"\u2191", "x":16.5, "y":4.75},
+				{"label":"Ctrl", "x":0, "y":5.75, "w":1.5},
+				{"label":"Alt", "x":2.5, "y":5.75, "w":1.5},
+				{"x":4, "y":5.75, "w":7},
+				{"label":"Alt", "x":11, "y":5.75, "w":1.5},
+				{"label":"Ctrl", "x":13.5, "y":5.75, "w":1.5},
+				{"label":"\u2190", "x":15.5, "y":5.75},
+				{"label":"\u2193", "x":16.5, "y":5.75},
+				{"label":"\u2192", "x":17.5, "y":5.75}
+			]
+        }
+    }
+}

keyboards/ai03/quasar/keymaps/ai03/keymap.c

@@ -0,0 +1,61 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+
+/*
+ *  K702,       K503, K504, K604, K704,    K706, K708, K609, K509,    K506, K406, K411, K412,    K415, K315, K114, \
+ *  K502, K402, K403, K404, K405, K505, K507, K407, K408, K409, K410, K510, K508,       K606,    K512, K514, K513, \
+ *  K602, K302, K303, K304, K305, K605, K607, K307, K308, K309, K310, K610, K608,       K206,    K511, K414, K413, \
+ *  K603, K202, K203, K204, K205, K705, K707, K207, K208, K209, K210, K710,             K106,                      \
+ *  K601,       K102, K103, K104, K105, K005, K007, K107, K108, K109, K010,             K101,          K714,       \
+ *  K500,       K715,                         K006,                         K015,       K100,    K014, K011, K012  \
+ */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT( /* Base */
+    KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,       KC_F5,   KC_F6,   KC_F7,   KC_F8,        KC_F9,   KC_F10,  KC_F11,  KC_F12,     KC_PSCR, KC_SLCK, KC_PAUS, 
+	KC_LGUI, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,           KC_BSPC,    KC_INS,  KC_HOME, KC_PGUP, 
+	KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_BSLS,    KC_DEL,  KC_END,  KC_PGDN, 
+	MO(1),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,                   KC_ENT,                                
+	KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,                   KC_RSFT,             KC_UP,            
+	KC_LCTL,          KC_LALT,                                     KC_SPC,                                      KC_GRV,           KC_DEL,     KC_LEFT, KC_DOWN, KC_RGHT  
+  ),
+  [1] = LAYOUT( /* FN */
+    RESET,            _______, _______, _______, _______,     _______, _______, _______, _______,      _______, _______, _______, _______,    _______, _______, _______, 
+	_______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,           KC_DEL,     _______, _______, _______, 
+	KC_CAPS, _______, KC_UP,   _______, _______, _______, _______, _______, KC_PGUP, _______, KC_MPRV, KC_MPLY, KC_MNXT,          _______,    _______, _______, _______, 
+	_______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_VOLU, KC_VOLD, KC_HOME, KC_PGDN, KC_END,  _______, _______,                   _______,                               
+	_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   KC_PSCR,             KC_PGUP,          
+	_______,          _______,                                     _______,                                     _______,          KC_BSPC,    KC_HOME, KC_PGDN, KC_END   
+  )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/ai03/quasar/keymaps/ai03/readme.md

@@ -0,0 +1,3 @@
+# The ai03 keymap for Quasar
+
+Focuses functionality mainly into the 60% cluster.

keyboards/ai03/quasar/keymaps/default/keymap.c

@@ -0,0 +1,61 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+
+/*
+ *  K702,       K503, K504, K604, K704,    K706, K708, K609, K509,    K506, K406, K411, K412,    K415, K315, K114, \
+ *  K502, K402, K403, K404, K405, K505, K507, K407, K408, K409, K410, K510, K508,       K606,    K512, K514, K513, \
+ *  K602, K302, K303, K304, K305, K605, K607, K307, K308, K309, K310, K610, K608,       K206,    K511, K414, K413, \
+ *  K603, K202, K203, K204, K205, K705, K707, K207, K208, K209, K210, K710,             K106,                      \
+ *  K601,       K102, K103, K104, K105, K005, K007, K107, K108, K109, K010,             K101,          K714,       \
+ *  K500,       K715,                         K006,                         K015,       K100,    K014, K011, K012  \
+ */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT( /* Base */
+    KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,       KC_F5,   KC_F6,   KC_F7,   KC_F8,        KC_F9,   KC_F10,  KC_F11,  KC_F12,     KC_PSCR, KC_SLCK, KC_PAUS, 
+	KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,           KC_BSPC,    KC_INS,  KC_HOME, KC_PGUP, 
+	KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_BSLS,    KC_DEL,  KC_END,  KC_PGDN, 
+	MO(1),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,                   KC_ENT,                                
+	KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,                   KC_RSFT,             KC_UP,            
+	KC_LCTL,          KC_LALT,                                     KC_SPC,                                      KC_RALT,          KC_RCTL,    KC_LEFT, KC_DOWN, KC_RGHT  
+  ),
+  [1] = LAYOUT( /* FN */
+    RESET,            _______, _______, _______, _______,     _______, _______, _______, _______,      _______, _______, _______, _______,    _______, _______, _______, 
+	_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,    _______, _______, _______, 
+	KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,    _______, _______, _______, 
+	_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______,                               
+	_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______,             _______,          
+	_______,          _______,                                     _______,                                     _______,          _______,    _______, _______, _______  
+  )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/ai03/quasar/keymaps/default/readme.md

@@ -0,0 +1,4 @@
+# The default keymap for Quasar
+
+Caps lock behaves as Fn/Layer. Press caps+esc for reset, caps+tab for caps lock.  
+The rest is basic WKL TKL.

keyboards/ai03/quasar/quasar.c

@@ -0,0 +1,51 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "quasar.h"
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+/*
+
+void matrix_init_kb(void) {
+  // put your keyboard start-up code here
+  // runs once when the firmware starts up
+
+  matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+  // put your looping keyboard code here
+  // runs every cycle (a lot)
+
+  matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+  // put your per-action keyboard code here
+  // runs for every action, just before processing by the firmware
+
+  return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+  led_set_user(usb_led);
+}
+
+*/

keyboards/ai03/quasar/quasar.h

@@ -0,0 +1,45 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    K702,       K503, K504, K604, K704,    K706, K708, K609, K509,    K506, K406, K411, K412,    K415, K315, K114, \
+	K502, K402, K403, K404, K405, K505, K507, K407, K408, K409, K410, K510, K508,       K606,    K512, K514, K513, \
+	K602, K302, K303, K304, K305, K605, K607, K307, K308, K309, K310, K610, K608,       K206,    K511, K414, K413, \
+	K603, K202, K203, K204, K205, K705, K707, K207, K208, K209, K210, K710,             K106,                      \
+	K601,       K102, K103, K104, K105, K005, K007, K107, K108, K109, K010,             K101,          K714,       \
+	K500,       K715,                         K006,                         K015,       K100,    K014, K011, K012  \
+) \
+{ \
+    { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K005,  K006,  K007,  KC_NO, KC_NO, K010,  K011,  K012,  KC_NO, K014,  K015  }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  KC_NO, KC_NO, KC_NO, KC_NO, K114,  KC_NO }, \
+	{ KC_NO, KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+	{ KC_NO, KC_NO, K302,  K303,  K304,  K305,  KC_NO, K307,  K308,  K309,  K310,  KC_NO, KC_NO, KC_NO, KC_NO, K315  }, \
+	{ KC_NO, KC_NO, K402,  K403,  K404,  K405,  K406,  K407,  K408,  K409,  K410,  K411,  K412,  K413,  K414,  K415  }, \
+	{ K500,  KC_NO, K502,  K503,  K504,  K505,  K506,  K507,  K508,  K509,  K510,  K511,  K512,  K513,  K514,  KC_NO }, \
+	{ KC_NO, K601,  K602,  K603,  K604,  K605,  K606,  K607,  K608,  K609,  K610,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+	{ KC_NO, KC_NO, K702,  KC_NO, K704,  K705,  K706,  K707,  K708,  KC_NO, K710,  KC_NO, KC_NO, KC_NO, K714,  K715  }  \
+}

keyboards/ai03/quasar/readme.md

@@ -0,0 +1,15 @@
+# Quasar
+
+![Quasar](https://i.imgur.com/XIbX2Pw.jpg)
+
+Replacement controller for the IBM Model M Space Saving keyboard
+
+Keyboard Maintainer: [ai03](https://github.com/ai03-2725)  
+Hardware Supported: The Quasar PCB  
+Hardware Availability: [Source available on GitHub](https://github.com/ai03-2725/Quasar/)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make ai03/quasar:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/ai03/quasar/rules.mk

@@ -0,0 +1,80 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

keyboards/cannonkeys/an_c/an_c.c

@@ -0,0 +1 @@
+#include "an_c.h"

keyboards/cannonkeys/an_c/an_c.h

@@ -0,0 +1,47 @@
+#pragma once
+
+#include "quantum.h"
+
+#define KNO KC_NO
+
+#define LAYOUT_60_ansi( \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,      K1E, \
+  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,           K2E, \
+  K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, \
+  K40, K41,  K42,              K45,            K49, K4A, K4B,           K4E \
+) { \
+  {  K00,  K01,  K02,  K03,  K04,    K05,    K06,    K07,    K08,    K09,  K0A,  K0B,  K0C,  K0D,  KNO}, \
+  {  K10,  K11,  K12,  K13,  K14,    K15,    K16,    K17,    K18,    K19,  K1A,  K1B,  K1C,  KNO,  K1E   }, \
+  {  K20,  K21,  K22,  K23,  K24,    K25,    K26,    K27,    K28,    K29,  K2A,  K2B,  KNO,  KNO,  K2E  }, \
+  {  K30,  K31,  K32,  K33,  K34,    K35,    K36,    K37,    K38,    K39,  K3A,  K3B,  KNO,  KNO,  KNO  }, \
+  {  K40,  K41,  K42,  KNO,  KNO,    K45,    KNO,    KNO,    KNO,    K49,  K4A,  K4B,  KNO,  KNO,  K4E  }  \
+}
+
+#define LAYOUT_60_tsangan_hhkb( \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,      K1E, \
+  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,           K2E, \
+  K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,           K3E,\
+  K40, K41,  K42,              K45,            K49,      K4B,           K4E \
+) { \
+  {  K00,  K01,  K02,  K03,  K04,    K05,    K06,    K07,    K08,    K09,  K0A,  K0B,  K0C,  K0D,  K0E}, \
+  {  K10,  K11,  K12,  K13,  K14,    K15,    K16,    K17,    K18,    K19,  K1A,  K1B,  K1C,  KNO,  K1E   }, \
+  {  K20,  K21,  K22,  K23,  K24,    K25,    K26,    K27,    K28,    K29,  K2A,  K2B,  KNO,  KNO,  K2E  }, \
+  {  K30,  K31,  K32,  K33,  K34,    K35,    K36,    K37,    K38,    K39,  K3A,  K3B,  KNO,  KNO,  K3E  }, \
+  {  K40,  K41,  K42,  KNO,  KNO,    K45,    KNO,    KNO,    KNO,    K49,  KNO,  K4B,  KNO,  KNO,  K4E  }  \
+}
+
+#define LAYOUT_all( \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E,\
+  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,      K1E, \
+  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,          K2E, \
+  K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,          K3E,\
+  K40, K41,  K42,              K45,            K49, K4A, K4B,          K4E \
+) { \
+  {  K00,  K01,  K02,  K03,  K04,    K05,    K06,    K07,    K08,    K09,  K0A,  K0B,  K0C,  K0D,  K0E}, \
+  {  K10,  K11,  K12,  K13,  K14,    K15,    K16,    K17,    K18,    K19,  K1A,  K1B,  K1C,  KNO,  K1E   }, \
+  {  K20,  K21,  K22,  K23,  K24,    K25,    K26,    K27,    K28,    K29,  K2A,  K2B,  KNO,  KNO,  K2E  }, \
+  {  K30,  K31,  K32,  K33,  K34,    K35,    K36,    K37,    K38,    K39,  K3A,  K3B,  KNO,  KNO,  K3E  }, \
+  {  K40,  K41,  K42,  KNO,  KNO,    K45,    KNO,    KNO,    KNO,    K49,  K4A,  K4B,  KNO,  KNO,  K4E  }  \
+}

keyboards/cannonkeys/an_c/boards/ST_STM32F072B_DISCOVERY/board.c

@@ -0,0 +1,109 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+/**
+ * @brief   PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ *          This variable is used by the HAL when initializing the PAL driver.
+ */
+const PALConfig pal_default_config = {
+#if STM32_HAS_GPIOA
+  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
+   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
+#endif
+#if STM32_HAS_GPIOB
+  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
+   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
+#endif
+#if STM32_HAS_GPIOC
+  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
+   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
+#endif
+#if STM32_HAS_GPIOD
+  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
+   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
+#endif
+#if STM32_HAS_GPIOE
+  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
+   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
+#endif
+#if STM32_HAS_GPIOF
+  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
+   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
+#endif
+#if STM32_HAS_GPIOG
+  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
+   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
+#endif
+#if STM32_HAS_GPIOH
+  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
+   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
+#endif
+#if STM32_HAS_GPIOI
+  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
+   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
+#endif
+};
+#endif
+
+void enter_bootloader_mode_if_requested(void);
+
+/**
+ * @brief   Early initialization code.
+ * @details This initialization must be performed just after stack setup
+ *          and before any other initialization.
+ */
+void __early_init(void) {
+  enter_bootloader_mode_if_requested();
+  stm32_clock_init();
+}
+
+#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
+/**
+ * @brief   MMC_SPI card detection.
+ */
+bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return true;
+}
+
+/**
+ * @brief   MMC_SPI card write protection detection.
+ */
+bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return false;
+}
+#endif
+
+/**
+ * @brief   Board-specific initialization code.
+ * @todo    Add your board-specific code, if any.
+ */
+void boardInit(void) {
+}

keyboards/cannonkeys/an_c/boards/ST_STM32F072B_DISCOVERY/board.h

@@ -0,0 +1,922 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#ifndef BOARD_H
+#define BOARD_H
+
+/*
+ * Setup for ST STM32F072B-Discovery board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_ST_STM32F072B_DISCOVERY
+#define BOARD_NAME                  "ST STM32F072B-Discovery"
+
+/*
+ * Board oscillators-related settings.
+ * NOTE: HSE not fitted.
+ */
+#if !defined(STM32_LSECLK)
+#define STM32_LSECLK                32768
+#endif
+
+#define STM32_LSEDRV                (3U << 3U)
+
+#if !defined(STM32_HSECLK)
+#define STM32_HSECLK                0U
+#endif
+
+#define STM32_HSE_BYPASS
+
+/*
+ * MCU type as defined in the ST header.
+ */
+#define STM32F072xB
+
+/*
+ * IO pins assignments.
+ */
+#define GPIOA_BUTTON                0U
+#define GPIOA_PIN1                  1U
+#define GPIOA_PIN2                  2U
+#define GPIOA_PIN3                  3U
+#define GPIOA_PIN4                  4U
+#define GPIOA_PIN5                  5U
+#define GPIOA_PIN6                  6U
+#define GPIOA_PIN7                  7U
+#define GPIOA_PIN8                  8U
+#define GPIOA_PIN9                  9U
+#define GPIOA_PIN10                 10U
+#define GPIOA_USB_DM                11U
+#define GPIOA_USB_DP                12U
+#define GPIOA_SWDIO                 13U
+#define GPIOA_SWCLK                 14U
+#define GPIOA_PIN15                 15U
+
+#define GPIOB_PIN0                  0U
+#define GPIOB_PIN1                  1U
+#define GPIOB_PIN2                  2U
+#define GPIOB_PIN3                  3U
+#define GPIOB_PIN4                  4U
+#define GPIOB_PIN5                  5U
+#define GPIOB_PIN6                  6U
+#define GPIOB_PIN7                  7U
+#define GPIOB_PIN8                  8U
+#define GPIOB_PIN9                  9U
+#define GPIOB_PIN10                 10U
+#define GPIOB_PIN11                 11U
+#define GPIOB_PIN12                 12U
+#define GPIOB_SPI2_SCK              13U
+#define GPIOB_SPI2_MISO             14U
+#define GPIOB_SPI2_MOSI             15U
+
+#define GPIOC_MEMS_CS               0U
+#define GPIOC_PIN1                  1U
+#define GPIOC_PIN2                  2U
+#define GPIOC_PIN3                  3U
+#define GPIOC_PIN4                  4U
+#define GPIOC_PIN5                  5U
+#define GPIOC_LED_RED               6U
+#define GPIOC_LED_BLUE              7U
+#define GPIOC_LED_ORANGE            8U
+#define GPIOC_LED_GREEN             9U
+#define GPIOC_PIN10                 10U
+#define GPIOC_PIN11                 11U
+#define GPIOC_PIN12                 12U
+#define GPIOC_PIN13                 13U
+#define GPIOC_OSC32_IN              14U
+#define GPIOC_OSC32_OUT             15U
+
+#define GPIOD_PIN0                  0U
+#define GPIOD_PIN1                  1U
+#define GPIOD_PIN2                  2U
+#define GPIOD_PIN3                  3U
+#define GPIOD_PIN4                  4U
+#define GPIOD_PIN5                  5U
+#define GPIOD_PIN6                  6U
+#define GPIOD_PIN7                  7U
+#define GPIOD_PIN8                  8U
+#define GPIOD_PIN9                  9U
+#define GPIOD_PIN10                 10U
+#define GPIOD_PIN11                 11U
+#define GPIOD_PIN12                 12U
+#define GPIOD_PIN13                 13U
+#define GPIOD_PIN14                 14U
+#define GPIOD_PIN15                 15U
+
+#define GPIOE_PIN0                  0U
+#define GPIOE_PIN1                  1U
+#define GPIOE_PIN2                  2U
+#define GPIOE_PIN3                  3U
+#define GPIOE_PIN4                  4U
+#define GPIOE_PIN5                  5U
+#define GPIOE_PIN6                  6U
+#define GPIOE_PIN7                  7U
+#define GPIOE_PIN8                  8U
+#define GPIOE_PIN9                  9U
+#define GPIOE_PIN10                 10U
+#define GPIOE_PIN11                 11U
+#define GPIOE_PIN12                 12U
+#define GPIOE_PIN13                 13U
+#define GPIOE_PIN14                 14U
+#define GPIOE_PIN15                 15U
+
+#define GPIOF_OSC_IN                0U
+#define GPIOF_OSC_OUT               1U
+#define GPIOF_PIN2                  2U
+#define GPIOF_PIN3                  3U
+#define GPIOF_PIN4                  4U
+#define GPIOF_PIN5                  5U
+#define GPIOF_PIN6                  6U
+#define GPIOF_PIN7                  7U
+#define GPIOF_PIN8                  8U
+#define GPIOF_PIN9                  9U
+#define GPIOF_PIN10                 10U
+#define GPIOF_PIN11                 11U
+#define GPIOF_PIN12                 12U
+#define GPIOF_PIN13                 13U
+#define GPIOF_PIN14                 14U
+#define GPIOF_PIN15                 15U
+
+/*
+ * IO lines assignments.
+ */
+#define LINE_BUTTON                 PAL_LINE(GPIOA, 0U)
+#define LINE_USB_DM                 PAL_LINE(GPIOA, 11U)
+#define LINE_USB_DP                 PAL_LINE(GPIOA, 12U)
+#define LINE_SWDIO                  PAL_LINE(GPIOA, 13U)
+#define LINE_SWCLK                  PAL_LINE(GPIOA, 14U)
+
+#define LINE_SPI2_SCK               PAL_LINE(GPIOB, 13U)
+#define LINE_SPI2_MISO              PAL_LINE(GPIOB, 14U)
+#define LINE_SPI2_MOSI              PAL_LINE(GPIOB, 15U)
+
+#define LINE_MEMS_CS                PAL_LINE(GPIOC, 0U)
+#define LINE_LED_RED                PAL_LINE(GPIOC, 6U)
+#define LINE_LED_BLUE               PAL_LINE(GPIOC, 7U)
+#define LINE_LED_ORANGE             PAL_LINE(GPIOC, 8U)
+#define LINE_LED_GREEN              PAL_LINE(GPIOC, 9U)
+#define LINE_OSC32_IN               PAL_LINE(GPIOC, 14U)
+#define LINE_OSC32_OUT              PAL_LINE(GPIOC, 15U)
+
+
+
+#define LINE_OSC_IN                 PAL_LINE(GPIOF, 0U)
+#define LINE_OSC_OUT                PAL_LINE(GPIOF, 1U)
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+#define PIN_MODE_INPUT(n)           (0U << ((n) * 2U))
+#define PIN_MODE_OUTPUT(n)          (1U << ((n) * 2U))
+#define PIN_MODE_ALTERNATE(n)       (2U << ((n) * 2U))
+#define PIN_MODE_ANALOG(n)          (3U << ((n) * 2U))
+#define PIN_ODR_LOW(n)              (0U << (n))
+#define PIN_ODR_HIGH(n)             (1U << (n))
+#define PIN_OTYPE_PUSHPULL(n)       (0U << (n))
+#define PIN_OTYPE_OPENDRAIN(n)      (1U << (n))
+#define PIN_OSPEED_VERYLOW(n)       (0U << ((n) * 2U))
+#define PIN_OSPEED_LOW(n)           (1U << ((n) * 2U))
+#define PIN_OSPEED_MEDIUM(n)        (2U << ((n) * 2U))
+#define PIN_OSPEED_HIGH(n)          (3U << ((n) * 2U))
+#define PIN_PUPDR_FLOATING(n)       (0U << ((n) * 2U))
+#define PIN_PUPDR_PULLUP(n)         (1U << ((n) * 2U))
+#define PIN_PUPDR_PULLDOWN(n)       (2U << ((n) * 2U))
+#define PIN_AFIO_AF(n, v)           ((v) << (((n) % 8U) * 4U))
+
+/*
+ * GPIOA setup:
+ *
+ * PA0  - BUTTON                    (input floating).
+ * PA1  - PIN1                      (input pullup).
+ * PA2  - PIN2                      (input pullup).
+ * PA3  - PIN3                      (input pullup).
+ * PA4  - PIN4                      (input pullup).
+ * PA5  - PIN5                      (input pullup).
+ * PA6  - PIN6                      (input pullup).
+ * PA7  - PIN7                      (input pullup).
+ * PA8  - PIN8                      (input pullup).
+ * PA9  - PIN9                      (input pullup).
+ * PA10 - PIN10                     (input pullup).
+ * PA11 - USB_DM                    (input floating).
+ * PA12 - USB_DP                    (input floating).
+ * PA13 - SWDIO                     (alternate 0).
+ * PA14 - SWCLK                     (alternate 0).
+ * PA15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOA_MODER             (PIN_MODE_INPUT(GPIOA_BUTTON) |         \
+                                     PIN_MODE_INPUT(GPIOA_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOA_USB_DM) |         \
+                                     PIN_MODE_INPUT(GPIOA_USB_DP) |         \
+                                     PIN_MODE_ALTERNATE(GPIOA_SWDIO) |      \
+                                     PIN_MODE_ALTERNATE(GPIOA_SWCLK) |      \
+                                     PIN_MODE_INPUT(GPIOA_PIN15))
+#define VAL_GPIOA_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
+#define VAL_GPIOA_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DM) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DP) |     \
+                                     PIN_OSPEED_HIGH(GPIOA_SWDIO) |         \
+                                     PIN_OSPEED_HIGH(GPIOA_SWCLK) |         \
+                                     PIN_OSPEED_HIGH(GPIOA_PIN15))
+#define VAL_GPIOA_PUPDR             (PIN_PUPDR_FLOATING(GPIOA_BUTTON) |     \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN10) |        \
+                                     PIN_PUPDR_FLOATING(GPIOA_USB_DM) |     \
+                                     PIN_PUPDR_FLOATING(GPIOA_USB_DP) |     \
+                                     PIN_PUPDR_PULLUP(GPIOA_SWDIO) |        \
+                                     PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) |      \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN15))
+#define VAL_GPIOA_ODR               (PIN_ODR_HIGH(GPIOA_BUTTON) |           \
+                                     PIN_ODR_HIGH(GPIOA_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOA_USB_DM) |           \
+                                     PIN_ODR_HIGH(GPIOA_USB_DP) |           \
+                                     PIN_ODR_HIGH(GPIOA_SWDIO) |            \
+                                     PIN_ODR_HIGH(GPIOA_SWCLK) |            \
+                                     PIN_ODR_HIGH(GPIOA_PIN15))
+#define VAL_GPIOA_AFRL              (PIN_AFIO_AF(GPIOA_BUTTON, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN7, 0U))
+#define VAL_GPIOA_AFRH              (PIN_AFIO_AF(GPIOA_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOA_USB_DM, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_USB_DP, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_SWDIO, 0U) |         \
+                                     PIN_AFIO_AF(GPIOA_SWCLK, 0U) |         \
+                                     PIN_AFIO_AF(GPIOA_PIN15, 0U))
+
+/*
+ * GPIOB setup:
+ *
+ * PB0  - PIN0                      (input pullup).
+ * PB1  - PIN1                      (input pullup).
+ * PB2  - PIN2                      (input pullup).
+ * PB3  - PIN3                      (input pullup).
+ * PB4  - PIN4                      (input pullup).
+ * PB5  - PIN5                      (input pullup).
+ * PB6  - PIN6                      (input pullup).
+ * PB7  - PIN7                      (input pullup).
+ * PB8  - PIN8                      (input pullup).
+ * PB9  - PIN9                      (input pullup).
+ * PB10 - PIN10                     (input pullup).
+ * PB11 - PIN11                     (input pullup).
+ * PB12 - PIN12                     (input pullup).
+ * PB13 - SPI2_SCK                  (alternate 0).
+ * PB14 - SPI2_MISO                 (alternate 0).
+ * PB15 - SPI2_MOSI                 (alternate 0).
+ */
+#define VAL_GPIOB_MODER             (PIN_MODE_INPUT(GPIOB_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOB_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOB_PIN12) |          \
+                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) |   \
+                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) |  \
+                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) |  \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOB_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN1) |       \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN2) |          \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN3) |          \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN4) |          \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) |   \
+                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) |  \
+                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_PUPDR             (PIN_PUPDR_PULLUP(GPIOB_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN12) |        \
+                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) |   \
+                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) |  \
+                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_ODR               (PIN_ODR_HIGH(GPIOB_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOB_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOB_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOB_SPI2_SCK) |         \
+                                     PIN_ODR_HIGH(GPIOB_SPI2_MISO) |        \
+                                     PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_AFRL              (PIN_AFIO_AF(GPIOB_PIN0, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN7, 0U))
+#define VAL_GPIOB_AFRH              (PIN_AFIO_AF(GPIOB_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) |      \
+                                     PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) |     \
+                                     PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
+
+/*
+ * GPIOC setup:
+ *
+ * PC0  - MEMS_CS                   (output pushpull maximum).
+ * PC1  - PIN1                      (input pullup).
+ * PC2  - PIN2                      (input pullup).
+ * PC3  - PIN3                      (input pullup).
+ * PC4  - PIN4                      (input pullup).
+ * PC5  - PIN5                      (input pullup).
+ * PC6  - LED_RED                   (output pushpull maximum).
+ * PC7  - LED_BLUE                  (output pushpull maximum).
+ * PC8  - LED_ORANGE                (output pushpull maximum).
+ * PC9  - LED_GREEN                 (output pushpull maximum).
+ * PC10 - PIN10                     (input pullup).
+ * PC11 - PIN11                     (input pullup).
+ * PC12 - PIN12                     (input pullup).
+ * PC13 - PIN13                     (input pullup).
+ * PC14 - OSC32_IN                  (input floating).
+ * PC15 - OSC32_OUT                 (input floating).
+ */
+#define VAL_GPIOC_MODER             (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) |       \
+                                     PIN_MODE_INPUT(GPIOC_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN5) |           \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_RED) |       \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_BLUE) |      \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) |    \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_GREEN) |     \
+                                     PIN_MODE_INPUT(GPIOC_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOC_OSC32_IN) |       \
+                                     PIN_MODE_INPUT(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) |  \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_OSPEEDR           (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN5) |       \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_RED) |       \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_BLUE) |      \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) |    \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_GREEN) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN13) |      \
+                                     PIN_OSPEED_HIGH(GPIOC_OSC32_IN) |      \
+                                     PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_PUPDR             (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) |    \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN5) |         \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_RED) |    \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) |   \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) |  \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN13) |        \
+                                     PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) |   \
+                                     PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_ODR               (PIN_ODR_HIGH(GPIOC_MEMS_CS) |          \
+                                     PIN_ODR_HIGH(GPIOC_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN5) |             \
+                                     PIN_ODR_LOW(GPIOC_LED_RED) |           \
+                                     PIN_ODR_LOW(GPIOC_LED_BLUE) |          \
+                                     PIN_ODR_LOW(GPIOC_LED_ORANGE) |        \
+                                     PIN_ODR_LOW(GPIOC_LED_GREEN) |         \
+                                     PIN_ODR_HIGH(GPIOC_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOC_OSC32_IN) |         \
+                                     PIN_ODR_HIGH(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_AFRL              (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) |       \
+                                     PIN_AFIO_AF(GPIOC_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_LED_RED, 0U) |       \
+                                     PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
+#define VAL_GPIOC_AFRH              (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) |    \
+                                     PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) |     \
+                                     PIN_AFIO_AF(GPIOC_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) |      \
+                                     PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
+
+/*
+ * GPIOD setup:
+ *
+ * PD0  - PIN0                      (input pullup).
+ * PD1  - PIN1                      (input pullup).
+ * PD2  - PIN2                      (input pullup).
+ * PD3  - PIN3                      (input pullup).
+ * PD4  - PIN4                      (input pullup).
+ * PD5  - PIN5                      (input pullup).
+ * PD6  - PIN6                      (input pullup).
+ * PD7  - PIN7                      (input pullup).
+ * PD8  - PIN8                      (input pullup).
+ * PD9  - PIN9                      (input pullup).
+ * PD10 - PIN10                     (input pullup).
+ * PD11 - PIN11                     (input pullup).
+ * PD12 - PIN12                     (input pullup).
+ * PD13 - PIN13                     (input pullup).
+ * PD14 - PIN14                     (input pullup).
+ * PD15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOD_MODER             (PIN_MODE_INPUT(GPIOD_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN15))
+#define VAL_GPIOD_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
+#define VAL_GPIOD_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOD_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN15))
+#define VAL_GPIOD_PUPDR             (PIN_PUPDR_PULLUP(GPIOD_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN15))
+#define VAL_GPIOD_ODR               (PIN_ODR_HIGH(GPIOD_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN15))
+#define VAL_GPIOD_AFRL              (PIN_AFIO_AF(GPIOD_PIN0, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN7, 0U))
+#define VAL_GPIOD_AFRH              (PIN_AFIO_AF(GPIOD_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN14, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN15, 0U))
+
+/*
+ * GPIOE setup:
+ *
+ * PE0  - PIN0                      (input pullup).
+ * PE1  - PIN1                      (input pullup).
+ * PE2  - PIN2                      (input pullup).
+ * PE3  - PIN3                      (input pullup).
+ * PE4  - PIN4                      (input pullup).
+ * PE5  - PIN5                      (input pullup).
+ * PE6  - PIN6                      (input pullup).
+ * PE7  - PIN7                      (input pullup).
+ * PE8  - PIN8                      (input pullup).
+ * PE9  - PIN9                      (input pullup).
+ * PE10 - PIN10                     (input pullup).
+ * PE11 - PIN11                     (input pullup).
+ * PE12 - PIN12                     (input pullup).
+ * PE13 - PIN13                     (input pullup).
+ * PE14 - PIN14                     (input pullup).
+ * PE15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOE_MODER             (PIN_MODE_INPUT(GPIOE_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN15))
+#define VAL_GPIOE_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
+#define VAL_GPIOE_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOE_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN15))
+#define VAL_GPIOE_PUPDR             (PIN_PUPDR_PULLUP(GPIOE_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN15))
+#define VAL_GPIOE_ODR               (PIN_ODR_HIGH(GPIOE_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN15))
+#define VAL_GPIOE_AFRL              (PIN_AFIO_AF(GPIOE_PIN0, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN7, 0U))
+#define VAL_GPIOE_AFRH              (PIN_AFIO_AF(GPIOE_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN14, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN15, 0U))
+
+/*
+ * GPIOF setup:
+ *
+ * PF0  - OSC_IN                    (input floating).
+ * PF1  - OSC_OUT                   (input floating).
+ * PF2  - PIN2                      (input pullup).
+ * PF3  - PIN3                      (input pullup).
+ * PF4  - PIN4                      (input pullup).
+ * PF5  - PIN5                      (input pullup).
+ * PF6  - PIN6                      (input pullup).
+ * PF7  - PIN7                      (input pullup).
+ * PF8  - PIN8                      (input pullup).
+ * PF9  - PIN9                      (input pullup).
+ * PF10 - PIN10                     (input pullup).
+ * PF11 - PIN11                     (input pullup).
+ * PF12 - PIN12                     (input pullup).
+ * PF13 - PIN13                     (input pullup).
+ * PF14 - PIN14                     (input pullup).
+ * PF15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOF_MODER             (PIN_MODE_INPUT(GPIOF_OSC_IN) |         \
+                                     PIN_MODE_INPUT(GPIOF_OSC_OUT) |        \
+                                     PIN_MODE_INPUT(GPIOF_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN15))
+#define VAL_GPIOF_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
+#define VAL_GPIOF_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) |    \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN15))
+#define VAL_GPIOF_PUPDR             (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) |     \
+                                     PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) |    \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN15))
+#define VAL_GPIOF_ODR               (PIN_ODR_HIGH(GPIOF_OSC_IN) |           \
+                                     PIN_ODR_HIGH(GPIOF_OSC_OUT) |          \
+                                     PIN_ODR_HIGH(GPIOF_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN15))
+#define VAL_GPIOF_AFRL              (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) |        \
+                                     PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) |       \
+                                     PIN_AFIO_AF(GPIOF_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN7, 0U))
+#define VAL_GPIOF_AFRH              (PIN_AFIO_AF(GPIOF_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN14, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN15, 0U))
+
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+  void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* BOARD_H */

keyboards/cannonkeys/an_c/boards/ST_STM32F072B_DISCOVERY/board.mk

@@ -0,0 +1,5 @@
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY

keyboards/cannonkeys/an_c/boards/ST_STM32F072B_DISCOVERY/cfg/board.chcfg

@@ -0,0 +1,703 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!-- STM32F0xx board Template -->
+<board
+  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
+  xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd">
+  <configuration_settings>
+    <templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path>
+    <output_path>..</output_path>
+    <hal_version>3.0.x</hal_version>
+  </configuration_settings>
+  <board_name>ST STM32F072B-Discovery</board_name>
+  <board_id>ST_STM32F072B_DISCOVERY</board_id>
+  <board_functions></board_functions>
+  <subtype>STM32F072xB</subtype>
+  <clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0"
+  	LSEBypass="false" LSEDrive="3 High Drive (default)" />
+  <ports>
+    <GPIOA>
+      <pin0
+        ID="BUTTON"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID="USB_DM"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID="USB_DP"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID="SWDIO"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin14
+        ID="SWCLK"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullDown"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin15
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOA>
+    <GPIOB>
+      <pin0
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID="SPI2_SCK"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin14
+        ID="SPI2_MISO"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin15
+        ID="SPI2_MOSI"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+    </GPIOB>
+    <GPIOC>
+      <pin0
+        ID="MEMS_CS"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Output"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID="LED_RED"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" />
+      <pin7
+        ID="LED_BLUE"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" />
+      <pin8
+        ID="LED_ORANGE"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" ></pin8>
+      <pin9
+        ID="LED_GREEN"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin14
+        ID="OSC32_IN"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin15
+        ID="OSC32_OUT"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOC>
+    <GPIOD>
+      <pin0
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin14
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin15
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOD>
+    <GPIOE>
+    	<pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    </GPIOE>
+    <GPIOF>
+      <pin0
+        ID="OSC_IN"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID="OSC_OUT"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin14
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin15
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOF>
+  </ports>
+</board>

keyboards/cannonkeys/an_c/bootloader_defs.h

@@ -0,0 +1,7 @@
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here (page 175):
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800

keyboards/cannonkeys/an_c/chconf.h

@@ -0,0 +1,524 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE              TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         FALSE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  FALSE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     FALSE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 FALSE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */

keyboards/cannonkeys/an_c/config.h

@@ -0,0 +1,98 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xCA04
+#define PRODUCT_ID      0xA00C
+#define DEVICE_VER      0x0001
+/* in python2: list(u"whatever".encode('utf-16-le')) */
+/*   at most 32 characters or the ugly hack in usb_main.c borks */
+#define MANUFACTURER CannonKeys
+#define PRODUCT AN-C
+#define DESCRIPTION AN-C Keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+#define MATRIX_COL_PINS { B11, B10, B2, A9, A15, B3, B4, B5, B6, B7, B8, B9, C13, C14, C15 }
+#define MATRIX_ROW_PINS { B1, B0, A7, A5, A4 }
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_LEVELS 6
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 6
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define RGBLIGHT_ANIMATIONS
+
+#define WS2812_LED_N 14
+#define RGBLED_NUM WS2812_LED_N
+#define PORT_WS2812     GPIOB
+#define PIN_WS2812      15
+#define WS2812_SPI SPID2
+
+
+// EEPROM usage
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x02
+#define EEPROM_VERSION_ADDR 34
+
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+// Dynamic macro starts after dynamic keymaps (35+(4*5*15*2)) = (35+600) = 635
+// start + layer * rows * col * 2
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
+#define EEPROM_CUSTOM_BACKLIGHT 636
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 637
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 200
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/cannonkeys/an_c/halconf.h

@@ -0,0 +1,354 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 TRUE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 TRUE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 TRUE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     1
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */

keyboards/cannonkeys/an_c/info.json

@@ -0,0 +1,15 @@
+{
+    "keyboard_name": "AN-C",
+    "url": "https://cannonkeys.com",
+    "maintainer": "awkannan",
+    "width": 15,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_60_ansi": {
+            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+        },
+        "LAYOUT_60_tsangan_hhkb": {
+            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Win", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}]
+        }
+    }
+}

keyboards/cannonkeys/an_c/keymaps/default/keymap.c

@@ -0,0 +1,43 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BASE 0
+#define _FN1 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT_60_ansi(
+    KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,                 KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSPC,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,   KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,  KC_BSLS,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,                 KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,           KC_ENT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,                 KC_M,    KC_COMM, KC_DOT,  KC_SLSH,                    KC_RSFT,
+    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                                          KC_RALT, KC_RGUI, MO(_FN1), KC_RCTL
+  ),
+
+  [_FN1] = LAYOUT_60_ansi(
+    KC_GESC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+    RGB_TOG, RGB_MOD, KC_UP,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+    BL_INC,  BL_DEC,  BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______,                   _______, 
+    KC_GRV,  _______, _______,                            _______,                            _______, _______, _______, RESET
+  )
+};

keyboards/cannonkeys/an_c/keymaps/tsangan/keymap.c

@@ -0,0 +1,44 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BASE 0
+#define _FN1 1
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT_60_tsangan_hhkb(
+    KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,                 KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSLS, KC_DEL,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,   KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,  KC_BSPC,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,                 KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,           KC_ENT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,                 KC_M,    KC_COMM, KC_DOT,  KC_SLSH,                    KC_RSFT, MO(_FN1),
+    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                                          KC_RALT, KC_RGUI, KC_RCTL
+  ),
+
+  [_FN1] = LAYOUT_60_tsangan_hhkb(
+    KC_GRV, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL, _______,
+    RGB_TOG, RGB_MOD, KC_UP,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+    BL_INC,  BL_DEC,  BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______,                   _______, _______,
+    _______,  _______, _______,                            _______,                            _______, _______, RESET
+  )
+};

keyboards/cannonkeys/an_c/keymaps/via/keymap.c

@@ -0,0 +1,43 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BASE 0
+#define _FN1 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT_all(
+    KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,                 KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSPC, KC_DEL,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,   KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,  KC_BSLS,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,                 KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,           KC_ENT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,                 KC_M,    KC_COMM, KC_DOT,  KC_SLSH,                    KC_RSFT, MO(_FN1),
+    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                                          KC_RALT, KC_RGUI, MO(_FN1), KC_RCTL
+  ),
+
+  [_FN1] = LAYOUT_all(
+    KC_GRV, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL, _______,
+    RGB_TOG, RGB_MOD, KC_UP,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+    BL_INC,  BL_DEC,  BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______,                   _______, _______,
+    _______,  _______, _______,                            _______,                            _______, _______, _______, RESET
+  )
+};

keyboards/cannonkeys/an_c/keymaps/via/rules.mk

@@ -0,0 +1,5 @@
+# rules.mk overrides to enable VIA
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
+

keyboards/cannonkeys/an_c/mcuconf.h

@@ -0,0 +1,176 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+// #define STM32F070xB
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_HSI14_ENABLED                 TRUE
+#define STM32_HSI48_ENABLED                 FALSE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE                          STM32_PPRE_DIV1
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_USBSW                         STM32_USBSW_HSI48
+#define STM32_CECSW                         STM32_CECSW_HSI
+#define STM32_I2C1SW                        STM32_I2C1SW_HSI
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         2
+#define STM32_GPT_TIM2_IRQ_PRIORITY         2
+#define STM32_GPT_TIM3_IRQ_PRIORITY         2
+#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  TRUE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_I2C2_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         3
+#define STM32_ICU_TIM2_IRQ_PRIORITY         3
+#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  TRUE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         3
+#define STM32_PWM_TIM2_IRQ_PRIORITY         3
+#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        3
+#define STM32_SERIAL_USART2_PRIORITY        3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  TRUE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      3
+
+#endif /* _MCUCONF_H_ */

keyboards/cannonkeys/an_c/readme.md

@@ -0,0 +1,12 @@
+# AN-C
+
+AN-C Keyboard
+
+Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan)  
+Hardware Supported: STM32F072CBT6  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make cannonkeys/an_c:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/cannonkeys/an_c/rules.mk

@@ -0,0 +1,59 @@
+# project specific files
+# SRC = ssd1306.c
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F0xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F072xB
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f0xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = ST_STM32F072B_DISCOVERY
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m0
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 6
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+
+# Build Options
+#   comment out to disable the options.
+#
+
+# project specific files
+VPATH += keyboards/cannonkeys/stm32f072
+SRC =	keyboard.c \
+      led.c
+
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+
+#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	    # USB Nkey Rollover
+CUSTOM_MATRIX = no # Custom matrix file
+# BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason
+RGBLIGHT_ENABLE = yes
+
+# RAW_ENABLE = yes
+# DYNAMIC_KEYMAP_ENABLE = yes
+
+LAYOUTS = 60_ansi 60_tsangan_hhkb

keyboards/cannonkeys/instant60/info.json

@@ -5,10 +5,10 @@
     "width": 15,
     "height": 5,
     "layouts": {
-        "LAYOUT_ansi": {
+        "LAYOUT_60_ansi": {
             "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
         },
-        "LAYOUT_tsangan": {
+        "LAYOUT_60_tsangan_hhkb": {
             "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Win", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}]
         }
     }

keyboards/cannonkeys/instant60/instant60.h

@@ -4,7 +4,7 @@
 
 #define KNO KC_NO
 
-#define LAYOUT_ansi( \
+#define LAYOUT_60_ansi( \
   K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
   K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,      K1E, \
   K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,           K2E, \
@@ -18,7 +18,7 @@
   {  K40,  K41,  K42,  KNO,  KNO,    K45,    KNO,    KNO,    KNO,    K49,  K4A,  K4B,  KNO,  KNO,  K4E  }  \
 }
 
-#define LAYOUT_tsangan( \
+#define LAYOUT_60_tsangan_hhkb( \
   K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
   K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,      K1E, \
   K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,           K2E, \

keyboards/cannonkeys/instant60/keymaps/default/keymap.c

@@ -30,7 +30,7 @@ enum custom_keycodes {
 };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_BASE] = LAYOUT_ansi(
+  [_BASE] = LAYOUT_60_ansi(
     KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,                 KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSPC, \
     KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,   KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,  KC_BSLS, \
     KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,                 KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,           KC_ENT,  \
@@ -38,7 +38,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                                          KC_RALT, KC_RGUI, MO(_FN1), KC_RCTL
   ),
 
-  [_FN1] = LAYOUT_ansi(
+  [_FN1] = LAYOUT_60_ansi(
     KC_GESC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL, \
     RGB_TOG, RGB_MOD, KC_UP,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
     BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______,          _______, \

keyboards/cannonkeys/instant60/keymaps/tsangan/keymap.c

@@ -30,7 +30,7 @@ enum custom_keycodes {
 };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_BASE] = LAYOUT_tsangan(
+  [_BASE] = LAYOUT_60_tsangan_hhkb(
     KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,                 KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSLS, KC_DEL, \
     KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,   KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,  KC_BSPC, \
     KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,                 KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,           KC_ENT,  \
@@ -38,7 +38,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                                          KC_RALT, KC_RGUI, KC_RCTL
   ),
 
-  [_FN1] = LAYOUT_tsangan(
+  [_FN1] = LAYOUT_60_tsangan_hhkb(
     KC_GRV, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL, _______,\
     RGB_TOG, RGB_MOD, KC_UP,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
     BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______,          _______, \

keyboards/cannonkeys/instant60/readme.md

@@ -2,9 +2,11 @@
 
 Instant60 Keyboard
 
-Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan1)  
+Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan)  
 Hardware Supported: STM32F072CBT6  
 
+[PCB Support Docs](https://docs.cannonkeys.com/instant60/)
+
 Make example for this keyboard (after setting up your build environment):
 
     make cannonkeys/instant60:default

keyboards/cannonkeys/instant60/rules.mk

@@ -54,3 +54,4 @@ RGBLIGHT_ENABLE = yes
 # RAW_ENABLE = yes
 # DYNAMIC_KEYMAP_ENABLE = yes
 
+LAYOUTS = 60_ansi 60_tsangan_hhkb

keyboards/cannonkeys/ortho75/boards/GENERIC_STM32_F103/board.c

@@ -0,0 +1,56 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+
+// Value to place in RTC backup register 10 for persistent bootloader mode
+#define RTC_BOOTLOADER_FLAG 0x424C
+
+/**
+ * @brief   PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ *          This variable is used by the HAL when initializing the PAL driver.
+ */
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+const PALConfig pal_default_config =
+{
+  {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
+  {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
+  {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
+  {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
+  {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
+};
+#endif
+
+/*
+ * Early initialization code.
+ * This initialization must be performed just after stack setup and before
+ * any other initialization.
+ */
+void __early_init(void) {
+
+  stm32_clock_init();
+}
+
+/*
+ * Board-specific initialization code.
+ */
+void boardInit(void) {
+   //JTAG-DP Disabled and SW-DP Enabled
+   AFIO->MAPR |= AFIO_MAPR_SWJ_CFG_JTAGDISABLE;
+   //Set backup register DR10 to enter bootloader on reset
+   BKP->DR10 = RTC_BOOTLOADER_FLAG;
+}

keyboards/cannonkeys/ortho75/boards/GENERIC_STM32_F103/board.h

@@ -0,0 +1,166 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * Setup for a Generic STM32F103 board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_GENERIC_STM32_F103
+#define BOARD_NAME              "Generic STM32F103x board"
+
+/*
+ * Board frequencies.
+ */
+#define STM32_LSECLK            32768
+#define STM32_HSECLK            8000000
+
+/*
+ * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
+ */
+#define STM32F103xB
+
+/*
+ * IO pins assignments
+ */
+
+/* on-board */
+
+#define GPIOA_LED               8
+#define GPIOD_OSC_IN            0
+#define GPIOD_OSC_OUT           1
+
+/* In case your board has a "USB enable" hardware
+   controlled by a pin, define it here. (It could be just
+   a 1.5k resistor connected to D+ line.)
+*/
+/*
+#define GPIOB_USB_DISC          10
+*/
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ *
+ * The digits have the following meaning:
+ *   0 - Analog input.
+ *   1 - Push Pull output 10MHz.
+ *   2 - Push Pull output 2MHz.
+ *   3 - Push Pull output 50MHz.
+ *   4 - Digital input.
+ *   5 - Open Drain output 10MHz.
+ *   6 - Open Drain output 2MHz.
+ *   7 - Open Drain output 50MHz.
+ *   8 - Digital input with PullUp or PullDown resistor depending on ODR.
+ *   9 - Alternate Push Pull output 10MHz.
+ *   A - Alternate Push Pull output 2MHz.
+ *   B - Alternate Push Pull output 50MHz.
+ *   C - Reserved.
+ *   D - Alternate Open Drain output 10MHz.
+ *   E - Alternate Open Drain output 2MHz.
+ *   F - Alternate Open Drain output 50MHz.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+
+/*
+ * Port A setup.
+ * Everything input with pull-up except:
+ * PA2  - Alternate output  (USART2 TX).
+ * PA3  - Normal input      (USART2 RX).
+ * PA9  - Alternate output  (USART1 TX).
+ * PA10 - Normal input      (USART1 RX).
+ */
+#define VAL_GPIOACRL            0x88884B88      /*  PA7...PA0 */
+#define VAL_GPIOACRH            0x888884B8      /* PA15...PA8 */
+#define VAL_GPIOAODR            0xFFFFFFFF
+
+/*
+ * Port B setup.
+ * Everything input with pull-up except:
+ * PB10    - Push Pull output  (USB switch).
+ */
+#define VAL_GPIOBCRL            0x88888888      /*  PB7...PB0 */
+#define VAL_GPIOBCRH            0x88888388      /* PB15...PB8 */
+#define VAL_GPIOBODR            0xFFFFFFFF
+
+/*
+ * Port C setup.
+ * Everything input with pull-up except:
+ * PC13    - Push Pull output  (LED).
+ */
+#define VAL_GPIOCCRL            0x88888888      /*  PC7...PC0 */
+#define VAL_GPIOCCRH            0x88388888      /* PC15...PC8 */
+#define VAL_GPIOCODR            0xFFFFFFFF
+
+/*
+ * Port D setup.
+ * Everything input with pull-up except:
+ * PD0  - Normal input (XTAL).
+ * PD1  - Normal input (XTAL).
+ */
+#define VAL_GPIODCRL            0x88888844      /*  PD7...PD0 */
+#define VAL_GPIODCRH            0x88888888      /* PD15...PD8 */
+#define VAL_GPIODODR            0xFFFFFFFF
+
+/*
+ * Port E setup.
+ * Everything input with pull-up except:
+ */
+#define VAL_GPIOECRL            0x88888888      /*  PE7...PE0 */
+#define VAL_GPIOECRH            0x88888888      /* PE15...PE8 */
+#define VAL_GPIOEODR            0xFFFFFFFF
+
+/*
+ * USB bus activation macro, required by the USB driver.
+ */
+/* The point is that most of the generic STM32F103* boards
+   have a 1.5k resistor connected on one end to the D+ line
+   and on the other end to some pin. Or even a slightly more
+   complicated "USB enable" circuit, controlled by a pin.
+   That should go here.
+
+   However on some boards (e.g. one that I have), there's no
+   such hardware. In which case it's better to not do anything.
+*/
+/*
+#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC)
+*/
+#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT);
+
+/*
+ * USB bus de-activation macro, required by the USB driver.
+ */
+/*
+#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC)
+*/
+#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12);
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+  void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* _BOARD_H_ */

keyboards/cannonkeys/ortho75/boards/GENERIC_STM32_F103/board.mk

@@ -0,0 +1,5 @@
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F103/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F103

keyboards/cannonkeys/ortho75/bootloader_defs.h

@@ -0,0 +1,10 @@
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here (page 175):
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+
+// STM32F103* does NOT have an USB bootloader in ROM (only serial),
+//  so setting anything here does not make much sense
+#define STM32_BOOTLOADER_ADDRESS 0x80000000

keyboards/cannonkeys/ortho75/chconf.h

@@ -0,0 +1,524 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 100000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE              TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         FALSE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 FALSE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */

keyboards/cannonkeys/ortho75/config.h

@@ -0,0 +1,82 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6464
+#define DEVICE_VER      0x0001
+/* in python2: list(u"whatever".encode('utf-16-le')) */
+/*   at most 32 characters or the ugly hack in usb_main.c borks */
+#define MANUFACTURER CannonKeys
+#define PRODUCT Ortho75
+#define DESCRIPTION Ortho75
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+#define MATRIX_COL_PINS { B11, B10, B1, B0, A7, A6, A5, B14, A15, A0, C15, C14, B7, B6, B5 }
+#define MATRIX_ROW_PINS { B12, C13, A2, A1, A3 }
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_LEVELS 6
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 6
+
+#define NUMBER_OF_ENCODERS 1
+#define ENCODERS_PAD_A { B9 }
+#define ENCODERS_PAD_B { B8 }
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define RGBLIGHT_ANIMATIONS
+
+#define WS2812_LED_N 16
+#define RGBLED_NUM WS2812_LED_N
+#define PORT_WS2812     GPIOB
+#define PIN_WS2812      15
+#define WS2812_SPI SPID2
+
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/cannonkeys/ortho75/halconf.h

@@ -0,0 +1,353 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 TRUE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 TRUE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     1
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */

keyboards/cannonkeys/ortho75/info.json

@@ -0,0 +1,88 @@
+{
+  "keyboard_name": "Ortho75",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 15,
+  "height": 5,
+  "layouts": {
+    "LAYOUT_ortho_5x12": {
+      "layout": [
+        {"label":"`", "x":0, "y":0},
+        {"label":"1", "x":1, "y":0},
+        {"label":"2", "x":2, "y":0},
+        {"label":"3", "x":3, "y":0},
+        {"label":"4", "x":4, "y":0},
+        {"label":"5", "x":5, "y":0},
+        {"label":"6", "x":6, "y":0},
+        {"label":"7", "x":7, "y":0},
+        {"label":"8", "x":8, "y":0},
+        {"label":"9", "x":9, "y":0},
+        {"label":"0", "x":10, "y":0},
+        {"label":"Backspace", "x":11, "y":0},
+        {"label":"0", "x":12, "y":0},
+        {"label":"0", "x":13, "y":0},
+        {"label":"0", "x":14, "y":0},
+        {"label":"Tab", "x":0, "y":1},
+        {"label":"Q", "x":1, "y":1},
+        {"label":"W", "x":2, "y":1},
+        {"label":"E", "x":3, "y":1},
+        {"label":"R", "x":4, "y":1},
+        {"label":"T", "x":5, "y":1},
+        {"label":"Y", "x":6, "y":1},
+        {"label":"U", "x":7, "y":1},
+        {"label":"I", "x":8, "y":1},
+        {"label":"O", "x":9, "y":1},
+        {"label":"P", "x":10, "y":1},
+        {"label":"Delete", "x":11, "y":1},
+        {"label":"0", "x":12, "y":1},
+        {"label":"0", "x":13, "y":1},
+        {"label":"0", "x":14, "y":1},
+        {"label":"Esc", "x":0, "y":2},
+        {"label":"A", "x":1, "y":2},
+        {"label":"S", "x":2, "y":2},
+        {"label":"D", "x":3, "y":2},
+        {"label":"F", "x":4, "y":2},
+        {"label":"G", "x":5, "y":2},
+        {"label":"H", "x":6, "y":2},
+        {"label":"J", "x":7, "y":2},
+        {"label":"K", "x":8, "y":2},
+        {"label":"L", "x":9, "y":2},
+        {"label":";", "x":10, "y":2},
+        {"label":"'", "x":11, "y":2},
+        {"label":"0", "x":12, "y":2},
+        {"label":"0", "x":13, "y":2},
+        {"label":"0", "x":14, "y":2},
+        {"label":"Shift", "x":0, "y":3},
+        {"label":"Z", "x":1, "y":3},
+        {"label":"X", "x":2, "y":3},
+        {"label":"C", "x":3, "y":3},
+        {"label":"V", "x":4, "y":3},
+        {"label":"B", "x":5, "y":3},
+        {"label":"N", "x":6, "y":3},
+        {"label":"M", "x":7, "y":3},
+        {"label":",", "x":8, "y":3},
+        {"label":".", "x":9, "y":3},
+        {"label":"/", "x":10, "y":3},
+        {"label":"Enter", "x":11, "y":3},
+        {"label":"0", "x":12, "y":3},
+        {"label":"0", "x":13, "y":3},
+        {"label":"0", "x":14, "y":3},
+        {"label":"Fn", "x":0, "y":4},
+        {"label":"Ctrl", "x":1, "y":4},
+        {"label":"Alt", "x":2, "y":4},
+        {"label":"Meta", "x":3, "y":4},
+        {"label":"Lower", "x":4, "y":4},
+        {"label":"Space", "x":5, "y":4},
+        {"label":"Space", "x":6, "y":4},
+        {"label":"Raise", "x":7, "y":4},
+        {"label":"Left", "x":8, "y":4},
+        {"label":"Down", "x":9, "y":4},
+        {"label":"Up", "x":10, "y":4},
+        {"label":"Right", "x":11, "y":4},
+        {"label":"0", "x":12, "y":4},
+        {"label":"0", "x":13, "y":4},
+        {"label":"0", "x":14, "y":4}
+      ]
+    }
+  }
+}

keyboards/cannonkeys/ortho75/keymaps/default/keymap.c

@@ -0,0 +1,72 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BASE 0
+#define _FN 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* QWERTY
+ * .--------------------------------------------------------------------------------------------------------------------------------------.
+ * | ESC    | 1      | 2      | 3      | 4      | 5      | -      | `      | =      | 6      | 7      | 8      | 9      | 0      | BACKSP |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * | TAB    | Q      | W      | E      | R      | T      | [      | \      | ]      | Y      | U      | I      | O      | P      | '      |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+ * | CAP LK | A      | S      | D      | F      | G      | HOME   | DEL    | PG UP  | H      | J      | K      | L      | ;      | ENTER  |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+ * | LSHIFT | Z      | X      | C      | V      | B      | END    | UP     | PG DN  | N      | M      | ,      | .      | /      | RSHIFT |
+ * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+--------+-----------------+--------+--------|
+ * | LCTRL  | LGUI   | LALT   | FN     | SPACE  | SPACE  | LEFT   | DOWN   | RIGHT  | SPACE  | SPACE  | FN     | RALT   | RGUI   | RCTRL  |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+  [_BASE] = LAYOUT_ortho_5x15( /* QWERTY */
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_MINS, KC_GRV,  KC_EQL,  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_LBRC, KC_BSLS, KC_RBRC, KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_QUOT,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_HOME, KC_DEL,  KC_PGUP, KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_ENT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_END,  KC_UP,   KC_PGDN, KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+    KC_LCTL, KC_LGUI, KC_LALT, MO(_FN), KC_SPC,  KC_SPC,  KC_LEFT, KC_DOWN, KC_RGHT, KC_SPC,  KC_SPC,  MO(_FN), KC_RALT, KC_RGUI, KC_RCTL
+  ),
+
+/* FUNCTION
+ * .--------------------------------------------------------------------------------------------------------------------------------------.
+ * | F1     | F2     | F3     | F4     | F5     | F6     | NUM LK | P/     | P*     | F7     | F8     | F9     | F10    | F11    | F12    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | SELECT | CALC   | MYCOMP | MAIL   | RGB HD | RGB HI | P7     | P8     | P9     | -      |        |        | PR SCR | SCR LK | PAUSE  |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | PREV   | PLAY   | NEXT   | STOP   | RGB SD | RGB SI | P4     | P5     | P6     | +      |        | RESET  |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | VOL-   | MUTE   | VOL+   | APP    | RGB VD | RGB VI | P1     | P2     | P3     | PENT   |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |        | RGB TG | FN     | RGB RMD| RGB MD | P0     |        | P.     | PENT   | PENT   | FN     |        |        |        |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+  [_FN] = LAYOUT_ortho_5x15( /* FUNCTION */
+    KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_NLCK, KC_SLSH, KC_ASTR, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
+    KC_MSEL, KC_CALC, KC_MYCM, KC_MAIL, RGB_HUD, RGB_HUI, KC_P7,   KC_P8,   KC_P9,   KC_MINS, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS,
+    KC_MPRV, KC_MPLY, KC_MNXT, KC_MSTP, RGB_SAD, RGB_SAI, KC_P4,   KC_P5,   KC_P6,   KC_PLUS, _______, RESET,   _______, _______, _______,
+    KC_VOLD, KC_MUTE, KC_VOLU, KC_APP,  RGB_VAD, RGB_VAI, KC_P1,   KC_P2,   KC_P3,   KC_PENT, _______, _______, _______, _______, _______,
+    _______, _______, RGB_TOG, MO(_FN), RGB_RMOD,RGB_MOD, KC_P0,   _______, KC_PDOT, KC_PENT, KC_PENT, MO(_FN), _______, _______, _______
+  )
+};

keyboards/cannonkeys/ortho75/ld/STM32F103x8_stm32duino_bootloader.ld

@@ -0,0 +1,88 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * ST32F103xB memory setup for use with the maplemini bootloader.
+ * You will have to
+ * 	#define CORTEX_VTOR_INIT 0x5000
+ * in your projects chconf.h
+ */
+MEMORY
+{
+    flash0  : org = 0x08002000, len = 64k - 0x2000
+    flash1  : org = 0x00000000, len = 0
+    flash2  : org = 0x00000000, len = 0
+    flash3  : org = 0x00000000, len = 0
+    flash4  : org = 0x00000000, len = 0
+    flash5  : org = 0x00000000, len = 0
+    flash6  : org = 0x00000000, len = 0
+    flash7  : org = 0x00000000, len = 0
+    ram0    : org = 0x20000000, len = 20k
+    ram1    : org = 0x00000000, len = 0
+    ram2    : org = 0x00000000, len = 0
+    ram3    : org = 0x00000000, len = 0
+    ram4    : org = 0x00000000, len = 0
+    ram5    : org = 0x00000000, len = 0
+    ram6    : org = 0x00000000, len = 0
+    ram7    : org = 0x00000000, len = 0
+}
+
+/* For each data/text section two region are defined, a virtual region
+   and a load region (_LMA suffix).*/
+
+/* Flash region to be used for exception vectors.*/
+REGION_ALIAS("VECTORS_FLASH", flash0);
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for constructors and destructors.*/
+REGION_ALIAS("XTORS_FLASH", flash0);
+REGION_ALIAS("XTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for code text.*/
+REGION_ALIAS("TEXT_FLASH", flash0);
+REGION_ALIAS("TEXT_FLASH_LMA", flash0);
+
+/* Flash region to be used for read only data.*/
+REGION_ALIAS("RODATA_FLASH", flash0);
+REGION_ALIAS("RODATA_FLASH_LMA", flash0);
+
+/* Flash region to be used for various.*/
+REGION_ALIAS("VARIOUS_FLASH", flash0);
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
+
+/* Flash region to be used for RAM(n) initialization data.*/
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
+
+/* RAM region to be used for Main stack. This stack accommodates the processing
+   of all exceptions and interrupts.*/
+REGION_ALIAS("MAIN_STACK_RAM", ram0);
+
+/* RAM region to be used for the process stack. This is the stack used by
+   the main() function.*/
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);
+
+/* RAM region to be used for data segment.*/
+REGION_ALIAS("DATA_RAM", ram0);
+REGION_ALIAS("DATA_RAM_LMA", flash0);
+
+/* RAM region to be used for BSS segment.*/
+REGION_ALIAS("BSS_RAM", ram0);
+
+/* RAM region to be used for the default heap.*/
+REGION_ALIAS("HEAP_RAM", ram0);
+
+/* Generic rules inclusion.*/
+INCLUDE rules.ld

keyboards/cannonkeys/ortho75/mcuconf.h

@@ -0,0 +1,209 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define STM32F103_MCUCONF
+
+/*
+ * STM32F103 drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   FALSE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PLLXTPRE                      STM32_PLLXTPRE_DIV1
+#define STM32_PLLMUL_VALUE                  9
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_USB_CLOCK_REQUIRED            TRUE
+#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_RTCSEL                        STM32_RTCSEL_HSEDIV
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC1_IRQ_PRIORITY         6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  TRUE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_IRQ_PRIORITY              15
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  TRUE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+#endif /* _MCUCONF_H_ */

keyboards/cannonkeys/ortho75/ortho75.c

@@ -0,0 +1,49 @@
+
+#include "ortho75.h"
+
+#define MEDIA_KEY_DELAY 10
+
+uint8_t layer = 0;
+
+uint32_t layer_state_set_kb(uint32_t state) {
+  state = layer_state_set_user(state);
+  layer = biton32(state);
+  return state;
+}
+
+void encoder_update_kb(uint8_t index, bool clockwise) {
+  uint16_t mapped_code = 0;
+  if (index == 0) {
+    if (clockwise) {
+        switch(layer){
+            case 0:
+            default:
+                mapped_code = KC_VOLU;
+                break;
+            case 1:
+                mapped_code = KC_MEDIA_NEXT_TRACK;
+                break;
+            case 2:
+                mapped_code = KC_PGDN;
+                break;
+        }
+    } else {
+        switch(layer){
+            case 0:
+            default:
+                mapped_code = KC_VOLD;
+                break;
+            case 1:
+                mapped_code = KC_MEDIA_PREV_TRACK;
+                break;
+            case 2:
+                mapped_code = KC_PGUP;
+                break;
+        }
+    }
+    uint16_t held_keycode_timer = timer_read();
+    register_code(mapped_code);
+    while (timer_elapsed(held_keycode_timer) < MEDIA_KEY_DELAY){ /* no-op */ }
+    unregister_code(mapped_code);
+  }
+}

keyboards/cannonkeys/ortho75/ortho75.h

@@ -0,0 +1,18 @@
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_ortho_5x15( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
+    k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e \
+) \
+{ \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e }, \
+}

keyboards/cannonkeys/ortho75/readme.md

@@ -0,0 +1,12 @@
+# Ortho 75
+
+A Blue Pill STM32F103C8T6-based 15x5 ortholinear keyboard.
+
+Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan)  
+Hardware Supported: Blue Pill STM32F103C8T6  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make cannonkeys/ortho75:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/cannonkeys/ortho75/rules.mk

@@ -0,0 +1,57 @@
+# project specific files
+VPATH += keyboards/cannonkeys/bluepill
+SRC =	led.c \
+      keyboard.c
+
+# GENERIC STM32F103C8T6 board - stm32duino bootloader
+OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
+MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
+BOARD = GENERIC_STM32_F103
+
+# OPT_DEFS =
+# MCU_LDSCRIPT = STM32F103x8
+# BOARD = GENERIC_STM32_F103
+
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F1xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f1xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m3
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 7
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+
+DFU_ARGS = -d 1eaf:0003 -a 2 -R
+
+#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	    # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes
+RGBLIGHT_ENABLE = yes
+ENCODER_ENABLE = yes
+
+LAYOUTS = LAYOUT_ortho_5x15

keyboards/crkbd/keymaps/manna-harbour_miryoku/keymap.c

@@ -0,0 +1,17 @@
+
+// generated from users/manna-harbour_miryoku/miryoku.org
+
+#define LAYOUT_miryoku( \
+       K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09, \
+       K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19, \
+       K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29, \
+       N30,   N31,   K32,   K33,   K34,   K35,   K36,   K37,   N38,   N39 \
+) \
+LAYOUT( \
+KC_NO, K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   KC_NO, \
+KC_NO, K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   KC_NO, \
+KC_NO, K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   KC_NO, \
+                     K32,   K33,   K34,   K35,   K36,   K37 \
+)
+
+#include "manna-harbour_miryoku.c"

keyboards/crkbd/keymaps/thumb_ctrl/config.h

@@ -0,0 +1,44 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+//#define USE_MATRIX_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+#define SSD1306OLED
+
+#define USE_SERIAL_PD2
+
+#define TAPPING_FORCE_HOLD
+#define TAPPING_TERM 150
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 27
+#define RGBLIGHT_LIMIT_VAL 120
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17

keyboards/crkbd/keymaps/thumb_ctrl/keymap.c

@@ -0,0 +1,253 @@
+#include QMK_KEYBOARD_H
+#include "bootloader.h"
+#ifdef PROTOCOL_LUFA
+  #include "lufa.h"
+  #include "split_util.h"
+#endif
+#ifdef SSD1306OLED
+  #include "ssd1306.h"
+#endif
+
+extern keymap_config_t keymap_config;
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+#endif
+
+extern uint8_t is_master;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum layer_names {
+  _QWERTY,
+  _LOWER,
+  _RAISE,
+  _ADJUST
+};
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST,
+  BACKLIT,
+  RGBRST
+};
+
+#define KC_ KC_TRNS
+#define KC______ KC_TRNS
+#define KC_XXXXX KC_NO
+#define KC_LOWER LOWER
+#define KC_RAISE RAISE
+#define KC_RST   RESET
+#define KC_LRST  RGBRST
+#define KC_LTOG  RGB_TOG
+#define KC_LHUI  RGB_HUI
+#define KC_LHUD  RGB_HUD
+#define KC_LSAI  RGB_SAI
+#define KC_LSAD  RGB_SAD
+#define KC_LVAI  RGB_VAI
+#define KC_LVAD  RGB_VAD
+#define KC_LMOD  RGB_MOD
+#define KC_CTLTB CTL_T(KC_TAB)
+#define KC_GUIEI GUI_T(KC_LANG2)
+#define KC_ALTKN ALT_T(KC_LANG1)
+#define KC_CTLEN CTL_T(KC_LANG2)    // for Linux and Windows
+#define KC_GUIEN GUI_T(KC_LANG2)    // for Mac
+#define KC_SFTJP SFT_T(KC_LANG1)
+#define KC_ALTSP ALT_T(KC_SPACE)
+#define KC_ALTDL ALT_T(KC_DEL)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT_kc(
+  //,-----------------------------------------.                ,-----------------------------------------.
+        ESC,     Q,     W,     E,     R,     T,                      Y,     U,     I,     O,     P,  BSPC,
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+      CTLTB,     A,     S,     D,     F,     G,                      H,     J,     K,     L,  SCLN,  QUOT,
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+       LSFT,     Z,     X,     C,     V,     B,                      N,     M,  COMM,   DOT,  SLSH,   ENT,
+  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+                                  ALTSP, LOWER, GUIEN,    SFTJP, RAISE, ALTDL
+                              //`--------------------'  `--------------------'
+  ),
+
+  [_LOWER] = LAYOUT_kc(
+  //,-----------------------------------------.                ,-----------------------------------------.
+           ,     1,     2,     3,     4,     5,                      6,     7,     8,     9,     0,      ,
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+           ,  HOME,   END,  PGDN,  PGUP,   F11,                   LEFT,  DOWN,    UP,  RGHT,   F12,  PIPE,
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+           ,    F1,    F2,    F3,    F4,    F5,                     F6,    F7,    F8,    F9,   F10,      ,
+  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+                                       ,      ,      ,         ,      ,       
+                              //`--------------------'  `--------------------'
+  ),
+
+  [_RAISE] = LAYOUT_kc(
+  //,-----------------------------------------.                ,-----------------------------------------.
+           ,  EXLM,    AT,  HASH,   DLR,  PERC,                   CIRC,  AMPR,  ASTR,  LPRN,  RPRN,      ,
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+           , XXXXX, XXXXX, XXXXX, XXXXX,  PSCR,                    GRV,  MINS,  PLUS,  LCBR,  RCBR,  BSLS,
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+           , XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,                   TILD,  UNDS,   EQL,  LBRC,  RBRC,      ,
+  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+                                       ,      ,      ,         ,      ,       
+                              //`--------------------'  `--------------------'
+  ),
+
+  [_ADJUST] = LAYOUT_kc(
+  //,-----------------------------------------.                ,-----------------------------------------.
+        RST,  LRST, XXXXX, XXXXX, XXXXX, XXXXX,                  XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+       LTOG,  LHUI,  LSAI,  LVAI, XXXXX, XXXXX,                  XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+       LMOD,  LHUD,  LSAD,  LVAD, XXXXX, XXXXX,                  XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,
+  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+                                  GUIEI, LOWER,   SPC,      ENT, RAISE, ALTKN 
+                              //`--------------------'  `--------------------'
+  )
+};
+
+int RGB_current_mode;
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+// Setting ADJUST layer RGB back to default
+void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
+  if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
+    layer_on(layer3);
+  } else {
+    layer_off(layer3);
+  }
+}
+
+void matrix_init_user(void) {
+    #ifdef RGBLIGHT_ENABLE
+      RGB_current_mode = rgblight_config.mode;
+    #endif
+    //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
+    #ifdef SSD1306OLED
+        iota_gfx_init(!has_usb());   // turns on the display
+    #endif
+}
+
+//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
+#ifdef SSD1306OLED
+
+// When add source files to SRC in rules.mk, you can use functions.
+const char *read_layer_state(void);
+const char *read_logo(void);
+void set_keylog(uint16_t keycode, keyrecord_t *record);
+const char *read_keylog(void);
+const char *read_keylogs(void);
+
+// const char *read_mode_icon(bool swap);
+// const char *read_host_led_state(void);
+// void set_timelog(void);
+// const char *read_timelog(void);
+
+void matrix_scan_user(void) {
+   iota_gfx_task();
+}
+
+void matrix_render_user(struct CharacterMatrix *matrix) {
+  if (is_master) {
+    // If you want to change the display of OLED, you need to change here
+    matrix_write_ln(matrix, read_layer_state());
+    matrix_write_ln(matrix, read_keylog());
+    matrix_write_ln(matrix, read_keylogs());
+    //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
+    //matrix_write_ln(matrix, read_host_led_state());
+    //matrix_write_ln(matrix, read_timelog());
+  } else {
+    matrix_write(matrix, read_logo());
+  }
+}
+
+void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
+  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+    memcpy(dest->display, source->display, sizeof(dest->display));
+    dest->dirty = true;
+  }
+}
+
+void iota_gfx_task_user(void) {
+  struct CharacterMatrix matrix;
+  matrix_clear(&matrix);
+  matrix_render_user(&matrix);
+  matrix_update(&display, &matrix);
+}
+#endif//SSD1306OLED
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  if (record->event.pressed) {
+#ifdef SSD1306OLED
+    set_keylog(keycode, record);
+#endif
+    // set_timelog();
+  }
+
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        persistent_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+        if (record->event.pressed) {
+          layer_on(_ADJUST);
+        } else {
+          layer_off(_ADJUST);
+        }
+        return false;
+        break;
+    case RGB_MOD:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          rgblight_mode(RGB_current_mode);
+          rgblight_step();
+          RGB_current_mode = rgblight_config.mode;
+        }
+      #endif
+      return false;
+      break;
+    case RGBRST:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          eeconfig_update_rgblight_default();
+          rgblight_enable();
+          RGB_current_mode = rgblight_config.mode;
+        }
+      #endif
+      break;
+  }
+  return true;
+}
+

keyboards/crkbd/keymaps/thumb_ctrl/rules.mk

@@ -0,0 +1,31 @@
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no        # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight. 
+SWAP_HANDS_ENABLE = no      # Enable one-hand typing
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+# If you want to change the display of OLED, you need to change here
+SRC +=  ./lib/glcdfont.c \
+        ./lib/rgb_state_reader.c \
+        ./lib/layer_state_reader.c \
+        ./lib/logo_reader.c \
+        ./lib/keylogger.c \
+        # ./lib/mode_icon_reader.c \
+        # ./lib/host_led_state_reader.c \
+        # ./lib/timelogger.c \

keyboards/crkbd/rev1/rev1.c

@@ -6,13 +6,6 @@
     float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
 #endif
 
-#ifdef SSD1306OLED
-void led_set_kb(uint8_t usb_led) {
-    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-    //led_set_user(usb_led);
-}
-#endif
-
 #ifdef RGB_MATRIX_ENABLE
 
   // Logical Layout

keyboards/dz60/dz60.h

@@ -494,4 +494,31 @@
     { k40,  k41,   KC_NO, k43,  k44,  KC_NO, k46,  KC_NO, k48,  KC_NO, k4a,  k4b,   KC_NO,k4d,  k4e   }  \
 }
 
+/* LAYOUT_60_2_function
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │0e │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+ * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e   │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+ * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d      │
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
+ * │30      │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3d    │3e │
+ * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┴┬──┴──┬───┼───┤
+ * │40  │41  │43  │46                      │4a   │4c   │4d │4e │
+ * └────┴────┴────┴────────────────────────┴─────┴─────┴───┴───┘
+*/
+#define LAYOUT_60_2_function( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d,      \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3d, k3e, \
+    k40, k41,      k43,           k46,                k4a, k4c,      k4d, k4e  \
+) { \
+    { k00,   k01,   k02,   k03,  k04,   k05,   k06,  k07,   k08,   k09,   k0a,   k0b,  k0c,   k0d,  k0e   }, \
+    { k10,   KC_NO, k12,   k13,  k14,   k15,   k16,  k17,   k18,   k19,   k1a,   k1b,  k1c,   k1d,  k1e   }, \
+    { k20,   KC_NO, k22,   k23,  k24,   k25,   k26,  k27,   k28,   k29,   k2a,   k2b,  k2c,   k2d,  KC_NO }, \
+    { k30,   KC_NO, k32,   k33,  k34,   k35,   k36,  k37,   k38,   k39,   k3a,   k3b,  KC_NO, k3d,  k3e   }, \
+    { k40,  k41,   KC_NO, k43,  KC_NO, KC_NO, k46,  KC_NO, KC_NO, KC_NO, k4a, KC_NO,  k4c, k4d,   k4e   }  \
+}
+
 #endif

keyboards/dz60/info.json

@@ -72,6 +72,10 @@
     "LAYOUT_60_iso_split_space_bs_rshift": {
       "key_count": 66,
       "layout": [{"label":"¬", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"£", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Del", "x":13, "y":0, "w":1}, {"label":"Backspace", "x":14, "y":0, "w":1}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Print screen", "x":14, "y":3, "w":1}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"label":"FN", "x":6.00, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
-    }
+    },
+    "LAYOUT_60_2_function": {
+        "key_count": 63,
+        "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"GUI", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.5}, {"label":"Control", "x":11.5, "y":4, "w":1.5}, {"label":"GUI", "x":13, "y":4}, {"label":"Fn2", "x":14, "y":4}]
+      }
   }
 }

keyboards/dz60/keymaps/kifinnsson/keymap.c

@@ -0,0 +1,210 @@
+#include QMK_KEYBOARD_H
+
+bool is_lgui_active = false;
+uint16_t lgui_timer = 0;
+
+
+//Macro Declarations
+enum my_keycodes {
+  KI_NO = SAFE_RANGE,
+    KI_1,
+    KI_2,
+    KI_3,
+    KI_4,
+    KI_5,
+    KI_6,
+    KI_7,
+    KI_8,
+    KI_9,
+    KI_10,
+    KI_11,
+    KI_12,
+    KI_ESC,
+    KI_BKSP,
+    KI_BSLS,
+    KI_WLFT,
+    KI_WRGT,
+    };
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	LAYOUT_all(
+		KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,   KC_8,     KC_9,    KC_0,    KC_MINS, KC_EQL,  XXXXXXX, KC_BSPC,
+		KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,   KC_U,     KC_Y,    KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS,
+		MO(1),   KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,   KC_E,     KC_I,    KC_O,    KC_QUOT, KC_ENT,
+		KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    MO(2),   KC_K,   KC_M,     KC_COMM, KC_DOT,  KC_SLSH, XXXXXXX, KC_RSFT, XXXXXXX,
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC,  KC_SPC,  KC_SPC,  KC_RALT, MO(1),  XXXXXXX,  MO(3),   KC_RCTL),
+
+	LAYOUT_all(
+		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+		_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PGUP, KC_HOME, KC_UP,   KC_END,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+		_______, XXXXXXX, KC_TAB,  KC_LSFT, KC_LCTL, XXXXXXX, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, KC_DEL,  KC_CAPS, XXXXXXX,
+		_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,,
+		_______, _______, XXXXXXX, KC_ENT,  KC_ENT,  KC_ENT,  _______, _______, _______, _______, RESET),
+
+	LAYOUT_all(
+		KI_ESC,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, KI_BKSP,
+		_______, KI_1,    KI_2,    KI_3,    KI_4,    KI_5,    KI_6,    KI_7,    KI_8,    KI_9,    KI_10,   KI_11,   KI_12,   KI_BSLS,
+		_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+		_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, KI_WLFT, KI_WRGT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+		_______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, XXXXXXX),
+
+	LAYOUT_all(
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    // Keycodes Starting with KI_ are place holders for my personal macros. They are set below. Most are simple SEND_STRINGS().
+    case KI_ESC:
+      if (record->event.pressed) {
+        SEND_STRING("");
+      } else {
+        
+      }
+      return false; // Skip all further processing of this key
+    case KI_1:
+      if (record->event.pressed) {
+        SEND_STRING("");
+      } else {
+        
+      }
+      return false; // Skip all further processing of this key
+    case KI_2:
+      if (record->event.pressed) {
+        SEND_STRING("");
+      } else {
+        
+      }
+      return false; // Skip all further processing of this key
+    case KI_3:
+      if (record->event.pressed) {
+        SEND_STRING("");
+      } else {
+        
+      }
+      return false; // Skip all further processing of this key
+    case KI_4:
+      if (record->event.pressed) {
+        SEND_STRING("");
+      } else {
+        
+      }
+      return false; // Skip all further processing of this key
+    case KI_5:
+      if (record->event.pressed) {
+        SEND_STRING("");
+      } else {
+        
+      }
+      return false; // Skip all further processing of this key
+    case KI_6:
+      if (record->event.pressed) {
+        SEND_STRING("");
+      } else {
+        
+      }
+      return false; // Skip all further processing of this key
+    case KI_7:
+      if (record->event.pressed) {
+        SEND_STRING("");
+      } else {
+        
+      }
+      return false; // Skip all further processing of this key
+    case KI_8:
+      if (record->event.pressed) {
+        SEND_STRING("");
+      } else {
+        
+      }
+      return false; // Skip all further processing of this key
+    case KI_9:
+      if (record->event.pressed) {
+        SEND_STRING("");
+      } else {
+        
+      }
+      return false; // Skip all further processing of this key
+    case KI_10:
+      if (record->event.pressed) {
+        SEND_STRING("");
+      } else {
+        
+      }
+      return false; // Skip all further processing of this key
+    case KI_11:
+      if (record->event.pressed) {
+        SEND_STRING("");
+      } else {
+        
+      }
+      return false; // Skip all further processing of this key
+    case KI_12:
+      if (record->event.pressed) {
+        SEND_STRING("");
+      } else {
+        
+      }
+      return false; // Skip all further processing of this key
+    case KI_BKSP:
+      if (record->event.pressed) {
+        SEND_STRING("");
+      } else {
+        
+      }
+      return false; // Skip all further processing of this key
+    case KI_BSLS:
+      if (record->event.pressed) {
+        SEND_STRING("");
+      } else {
+        
+      }
+      return false; // Skip all further processing of this key
+
+    //Windows Win+Left tap to move window without resetting KC_LGUI
+    //Additional code is in matrix_scan_user()
+    case KI_WLFT:
+      if (record->event.pressed) {
+        if (!is_lgui_active) {
+          is_lgui_active = true;
+          register_code(KC_LGUI);
+        } 
+        lgui_timer = timer_read();
+        tap_code(KC_LEFT);
+      } else {
+        
+      }
+      return false; // Skip all further processing of this key
+    //Windows Win+Right tap to move window without resetting KC_LGUI
+    //Additional code is in matrix_scan_user()
+    case KI_WRGT:
+      if (record->event.pressed) {
+        if (!is_lgui_active) {
+          is_lgui_active = true;
+          register_code(KC_LGUI);
+        } 
+        lgui_timer = timer_read();
+        tap_code(KC_RIGHT);
+      } else {
+        
+      }
+      return false; // Skip all further processing of this key
+    default:
+      return true; // Process all other keycodes normally
+  }
+}
+
+//Check if KC_LGUI is active in KI_WLFT and KI_WRGT
+void matrix_scan_user(void) { 
+  if (is_lgui_active) {
+    if (timer_elapsed(lgui_timer) > 1000) {
+      unregister_code(KC_LGUI);
+      is_lgui_active = false;
+    }
+  }
+}

keyboards/dz60/keymaps/kifinnsson/readme.md

@@ -0,0 +1,5 @@
+# kifinnsson's Colemak angle mod ansi-ish layout
+-----------------
+
+Keymap for my non-standard DZ60 layout. It is an ansi layout on the right and iso on the left (ie 1.25x left shift). This is to implement the angle mod on for Colemak which is the base layer. A side effect of this is that I have an extra key on row 4, which sits between the "b" and "k" keys in Colemak. I use this key as a switch to layer 2 which is my macro layer.
+

keyboards/dz60/keymaps/kifinnsson/rules.mk

@@ -0,0 +1,6 @@
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = no	# Audio control and System control(+450)

keyboards/dz60/keymaps/mpaarating/keymap.c

@@ -0,0 +1,24 @@
+#include QMK_KEYBOARD_H
+
+// Layer definition
+#define L0 0
+#define L1 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[L0] = LAYOUT_60_2_function(
+		KC_ESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL, KC_BSLASH, KC_GRAVE,
+		KC_TAB,           KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPACE,
+		KC_LCTL,          KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+		KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(L1),
+		KC_LCTL, KC_LGUI,          KC_LALT,                   KC_SPC,                             KC_RALT, KC_RCTL, KC_RGUI, MO(L1)
+    ),
+
+	[L1] = LAYOUT_60_2_function(
+		KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, KC_TRNS, KC_TRNS,
+		KC_TRNS,          RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_UP, KC_TRNS, KC_DELETE,
+		KC_CAPS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS,  KC_LEFT, KC_RIGHT, KC_TRNS,
+		KC_TRNS,          KC_TRNS, KC_TRNS, BL_DEC,  BL_TOGG, BL_INC,  BL_STEP, KC_TRNS, KC_TRNS,  KC_END,  KC_DOWN, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS,          KC_TRNS,                   KC_TRNS,                            KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS
+    )
+};

keyboards/dz60/keymaps/mpaarating/readme.md

@@ -0,0 +1,12 @@
+# DZ60
+
+![dz60](https://i.imgur.com/nVOX9Gb.jpg)
+
+### Layout
+**Note:** Layer 2 does not exist currently
+![layer 0](https://i.imgur.com/uXFTNBs.png)
+![layer 1](https://i.imgur.com/f7uTkDU.png)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make dz60:mpaarating

keyboards/dz60/keymaps/weeheavy_2.25_lshift/README.md

@@ -0,0 +1,53 @@
+![DZ60 ANSI with arrow cluster](https://i.imgur.com/hX6rMcm.png)
+
+# weeheavy's DZ60 layout
+
+* Default 2.25 left shift
+* arrow cluster
+
+## Layouts
+
+The base layout is ANSI QWERTY.
+
+Key sizes (ASCII keyboards below match this scale):
+
+    1u    = 4 chars  = |  |
+    1.25u = 5 chars  = |   |
+    1.5u  = 6 chars  = |    |
+    1.75u = 7 chars  = |     |
+    2u    = 8 chars  = |      |
+    2.25u = 9 chars  = |       |
+    2.75u = 11 chars = |         |
+    6.25u = 25 chars = |                       |
+
+### Layer 0: Base layout
+
+Specialities:
+
+* Arrow cluster
+* FN: access to layer 1
+
+```
+,----------------------------------------------------------.
+|Es||1 ||2 ||3 ||4 ||5 ||6 ||7 ||8 ||9 ||0 ||- ||= || Bksp |
+|----------------------------------------------------------+
+|Tab ||Q ||W ||E ||R ||T ||Y ||U ||I ||O ||P ||[ ||] || \  |
+|----------------------------------------------------------+
+|Caps ||A ||S ||D ||F ||G ||H ||J ||K ||L ||; ||' || Enter |
+|----------------------------------------------------------+
+| Shift ||Z ||X ||C ||V ||B ||N ||M ||, ||. ||/ ||  Shift  |
+|----------------------------------------------------------+
+|Ctl||Win||Alt||          Space         |FN||← ||↑ ||↓ ||→ |
+`----------------------------------------------------------'
+```
+
+### Layer 1: Utility
+
+Specialities:
+
+* F1-F12 keys when holding FN
+* Multimedia cluster on the bottom right
+* RGB config on the left hand side
+* Reset key on ESC and backslash location
+* Brightness control top right
+* Additional "B" key (a learning from my mistakes)

keyboards/dz60/keymaps/weeheavy_2.25_lshift/keymap.c

@@ -0,0 +1,30 @@
+#include QMK_KEYBOARD_H
+
+// Make special keycodes more visible
+#define ____ KC_TRNS
+#define XXXX KC_NO
+
+// Layer definition
+#define L0 0
+#define L1 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+// Base layer - ANSI QWERTY
+[L0] = LAYOUT_all(
+	KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, XXXX, KC_BSPC,
+	KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+	KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+	KC_LSFT, XXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_RSFT,
+	KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, MO(L1), KC_LEFT, KC_UP, KC_DOWN, KC_RIGHT),
+
+// Utility layer - RGB and multimedia control, reset and additional "b" button
+[L1] = LAYOUT_all(
+	RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ____, ____,
+	KC_B, RGB_TOG, RGB_MOD, RGB_M_K, RGB_M_R, ____, ____, KC_PSCR, ____, KC_PAUS, KC_BRID, KC_BRIU, ____, RESET,
+	____, RGB_HUI, RGB_HUD, KC_DEL, ____, ____, ____, KC_INS, KC_HOME, KC_PGUP, ____, ____, ____,
+	____, ____, RGB_SAI, RGB_SAD, ____, ____, ____, ____, ____, KC_END, KC_PGDN, KC_MPLY, ____, KC_MUTE, KC_MUTE,
+	____, RGB_VAI, RGB_VAD, ____, ____, ____, ____, KC_MPRV, KC_VOLU, KC_VOLD, KC_MNXT),
+
+};
+

keyboards/ergodash/rev1/keymaps/333fred/config.h

@@ -0,0 +1,10 @@
+#pragma once
+
+#include QMK_KEYBOARD_CONFIG_H
+#include "333fred_config.h"
+
+#define USE_SERIAL
+#define MASTER_LEFT
+
+#undef TAPPING_TERM
+#define TAPPING_TERM 200

keyboards/ergodash/rev1/keymaps/333fred/keymap.c

@@ -0,0 +1,57 @@
+#include QMK_KEYBOARD_H
+#include "333fred.h"
+
+extern keymap_config_t keymap_config;
+
+// Use an expanded macro with VA_ARGS to ensure that the common
+// rows get expanded out before getting passed to the LAYOUT
+// macro.
+
+#define LAYOUT_wrapper(...) LAYOUT(__VA_ARGS__)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [BASE] = LAYOUT_wrapper( \
+    ROW5_LEFT_BASE,          KC_F5,                                     KC_F6,            ROW5_RGHT_BASE,
+    ROW4_LEFT_BASE,          TG(GAME),                                  TG(GAME_ARROW),   ROW4_RGHT_BASE,
+    ROW3_LEFT_BASE,          KC_LGUI,                                   KC_BSPC,          ROW3_RGHT_BASE,
+    ROW2_LEFT_BASE,          TD(TD_COPY_PASTE),                         KC_UP ,           ROW2_RGHT_BASE,
+    ROW1_LEFT_BASE, KC_BSPC, TD(TD_SYM_VIM),    KC_DEL,         KC_ENT, KC_SPC , KC_DOWN, ROW1_RGHT_BASE
+  ),
+
+  [SYMB] = LAYOUT_wrapper(
+    ROW5_LEFT_SYMB,          _______,                           _______,          ROW5_RGHT_SYMB,
+    ROW4_LEFT_SYMB,          PSCREEN_APP,                       _______,          ROW4_RGHT_SYMB,
+    ROW3_LEFT_SYMB,          KC_PSCR,                           KC_VOLU,          ROW3_RGHT_SYMB,
+    ROW2_LEFT_SYMB,          _______,                           KC_VOLD,          ROW2_RGHT_SYMB,
+    ROW1_LEFT_SYMB, _______, _______, _______,         KC_MPRV, KC_MPLY, KC_MNXT, ROW1_RGHT_SYMB
+  ),
+
+  [VIM] = LAYOUT_wrapper(
+    ROW5_LEFT_VIM,          _______,                           _______,          ROW5_RGHT_VIM,
+    ROW4_LEFT_VIM,          _______,                           _______,          ROW4_RGHT_VIM,
+    ROW3_LEFT_VIM,          _______,                           _______,          ROW3_RGHT_VIM,
+    ROW2_LEFT_VIM,          _______,                           _______,          ROW2_RGHT_VIM,
+    ROW1_LEFT_VIM, _______, _______, _______,         _______, _______, _______, ROW1_RGHT_VIM
+  ),
+
+  [GAME] = LAYOUT_wrapper(
+      KC_ESC,   SIX_TRNS,                                                   _______, SIX_TRNS,
+      SIX_TRNS,                                              _______,     _______, SIX_TRNS,
+      KC_LCTL,  FOUR_TRNS,                          _______, KC_F6,         _______, SIX_TRNS,
+      KC_LSFT,  KC_Z,    FOUR_TRNS,                          KC_F5,         _______, SIX_TRNS,
+      KC_ENT,   _______, KC_LOCK, KC_BSPC, KC_LALT, KC_SPC,  OSM(SYMB),     _______, SIX_TRNS
+  ),
+
+  [GAME_ARROW] = LAYOUT_wrapper(
+      KC_ESC,   SIX_TRNS,                                                  _______, SIX_TRNS,
+      _______,  _______, KC_UP,   _______,  _______, _______, _______,     _______, SIX_TRNS,
+      KC_LCTL,  KC_LEFT, KC_DOWN, KC_RGHT,  _______, _______, KC_F6,       _______, SIX_TRNS,
+      KC_LSFT,  KC_Z,    FOUR_TRNS,                           KC_F5,       _______, SIX_TRNS,
+      KC_ENT,   _______, KC_LOCK, KC_BSPC, KC_LALT, KC_SPC,  OSM(SYMB),    _______, SIX_TRNS
+  )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  tap_dance_process_keycode(keycode);
+  return !try_handle_macro(keycode, record);
+}

keyboards/ergodash/rev1/keymaps/333fred/rules.mk

@@ -0,0 +1,7 @@
+BACKLIGHT_ENABLE = no
+RGBLIGHT_ENABLE = yes
+AUDIO_ENABLE = no
+NKRO_ENABLE = yes
+KEY_LOCK_ENABLE = yes
+TAP_DANCE_ENABLE = yes
+CONSOLE_ENABLE = no

keyboards/ergodone/keymaps/vega/keymap.c

@@ -0,0 +1,555 @@
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+    BASE,
+    GREL,
+    GREU,
+    SYMB,
+    MATH,
+    QWER,
+    FNLR
+};
+
+enum unicode_names {
+  //MATH
+	neq,  //≠
+	intgrl,  //∫
+	angl,  //∠
+	imply,  //⇒
+	equiv,  //⇔
+	porp,  //∝
+	exists,  //∃
+	nexists,  //∄
+	forall,  //∀
+	and,  //∧
+	or,  //∨
+	xor,  //⊕
+	apeql,  //≅
+	root,  //√
+	not,  //¬
+	sum,  //∑
+	plsminus,  //±
+	infin,  //∞
+	emtyset,  //∅
+	Mn,  //ℕ
+	Mz,  //ℤ
+	Mq,  //ℚ
+	Mr,  //ℝ
+	Mc,  //ℂ
+	eleof,  //∈
+	member,  //∋
+	neleof,  //∉
+	nmember,  //∌
+	subsetof,  //⊂
+	suprsetof,  //⊃
+	intersection,  //∩
+	Munion,  //∪
+
+  //SYMB
+  arwl,
+  arwu,
+  arwr,
+  arwd,
+
+  uxclm,
+  cent,
+  degree,
+  trade,
+  copy,
+  numero,
+  sect,
+  mdot,
+  rang,
+
+
+  lshade,
+  mshade,
+  dshade,
+
+  fire,
+  water,
+  cleft,
+  baster,
+  neteen,
+  floppy,
+
+  boxemp,
+  boxchk,
+  boxX,
+
+  bbstr,
+  bbstl,
+  bbml,
+  bbmr,
+  bbmb,
+  bbrtr,
+  bbrbr,
+  bbrtl,
+  bbrbl,
+  bbsbr,
+  bbsbl,
+  bbmbr,
+  bbmbl,
+
+  Agrave,
+  Aacute,
+  Acircm,
+  Atilde,
+  Abreve,
+  Adiaer,
+  Adacut,
+
+    // not all ogham letters, as I
+    // actually intend to use them for hex
+  OS,
+  Oa,
+  Ob,
+  Oc,
+  Od,
+  Oe,
+  Of,
+  Og,
+  Oh,
+  Oi,
+  OA,
+  OB,
+  OC,
+  OD,
+  OE,
+  OF,
+  Os,
+  OED,
+  Ox,
+  gnd,
+  sqr,
+  sine,
+  opt,
+
+  geq,
+  leq,
+  brkup,
+  brkdn,
+  perup,
+  perdn,
+
+  //GREEL
+	rone,  // 1:: ⅰ
+	rtwo,
+	rthree,
+	rfour,  // 4:: ⅳ
+	rfive,  // 5:: ⅴ
+	rsix,  // 6:: ⅵ
+	rseven,  // 7:: ⅶ
+	reight,  // 8:: ⅷ
+	rnine,  // 9:: ⅸ
+	rten,  // 0:: ⅹ
+	gq,  // q:: θ
+	gw,  // w:: ω
+	ge,  // e:: ε
+	gr,  // r:: ρ
+	gt,  // t:: τ
+	gy,  // y:: ψ
+	gu,  // u:: υ
+	gi,  // i:: ι
+	go,  // o:: ο
+	gp,  // p:: π
+	ga,  // a:: α
+	gs,  // s:: σ
+	gd,  // d:: δ
+	gf,  // f:: φ
+	gg,  // g:: γ
+	gh,  // h:: η
+	gj,  // j:: ϑ
+	gk,  // k:: κ
+	gl,  // l:: λ
+	gz,  // z:: ζ
+	gx,  // x:: ξ
+	gc,  // c:: χ
+	gv,  // v:: ς
+	gb,  // b:: β
+	gn,  // n:: ν
+	gm,  // m:: μ
+
+  //GREEU
+	Rone,  // 1:: Ⅰ
+	Rtwo,  // 2:: Ⅱ
+	Rthree,  // 3:: Ⅲ
+	Rfour,  // 4:: Ⅳ
+	Rfive,  // 5:: Ⅴ
+	Rsix,  // 6:: Ⅵ
+	Rseven,  // 7:: Ⅶ
+	Reight,  // 8:: Ⅷ
+	Rnine,  // 9:: Ⅸ
+  Rten,
+	Gq,  // Q:: Θ
+	Gw,  // W:: Ω
+	Ge,  // E:: Ε
+	Gr,  // R:: Ρ
+	Gt,  // T:: Τ
+	Gy,  // Y:: Ψ
+	Gu,  // U:: Υ
+	Gi,  // I:: Ι
+	Go,  // O:: Ο
+	Gp,  // P:: Π
+	Ga,  // A:: Α
+	Gs,  // S:: Σ
+	Gd,  // D:: Δ
+	Gf,  // F:: Φ
+	Gg,  // G:: Γ
+	Gh,  // H:: Η
+	Gj,  // J:: J
+	Gk,  // K:: Κ
+	Gl,  // L:: Λ
+	Gz,  // Z:: Ζ
+	Gx,  // X:: Ξ
+	Gc,  // C:: Χ
+	Gv,  // V:: V
+	Gb,  // B:: Β
+	Gn,  // N:: Ν
+	Gm,  // M:: Μ
+};
+
+const uint32_t PROGMEM unicode_map[] = {
+  //MATH
+	[neq] = 0x2260,  //≠
+	[intgrl] = 0x222B,  //∫
+	[angl] = 0x2220,  //∠
+	[imply] = 0x21D2,  //⇒
+	[equiv] = 0x21D4,  //⇔
+	[porp] = 0x221D,  //∝
+	[exists] = 0x2203,  //∃
+	[nexists] = 0x2204,  //∄
+	[forall] = 0x2200,  //∀
+	[and] = 0x2227,  //∧
+	[or] = 0x2228,  //∨
+	[xor] = 0x2295,  //⊕
+	[apeql] = 0x2245,  //≅
+	[root] = 0x221A,  //√
+	[not] = 0x00AC,  //¬
+	[sum] = 0x2211,  //∑
+	[plsminus] = 0x00B1,  //±
+	[infin] = 0x221E,  //∞
+	[emtyset] = 0x2205,  //∅
+	[Mn] = 0x2115,  //ℕ
+	[Mz] = 0x2124,  //ℤ
+	[Mq] = 0x211A,  //ℚ
+	[Mr] = 0x211D,  //ℝ
+	[Mc] = 0x2102,  //ℂ
+	[eleof] = 0x2208,  //∈
+	[member] = 0x220B,  //∋
+	[neleof] = 0x2209,  //∉
+	[nmember] = 0x220C,  //∌
+	[subsetof] = 0x2282,  //⊂
+	[suprsetof] = 0x2283,  //
+	[intersection] = 0x2229,  //∩
+	[Munion] = 0x222A,  //∪
+  //Symbol
+	[arwl] = 0x2190,  //←
+  [arwu] = 0x2191, //↑
+	[arwr] = 0x2192,  //→
+  [arwd] = 0x2193, //↓
+
+	[uxclm] = 0x00A1,  //¡
+  [cent] = 0x00A2, //¢
+  [degree] = 0x00B0, //°
+  [trade] = 0x2122, //™
+  [copy] = 0x00A9, //©
+  [numero] = 0x2116, //№
+  [sect] = 0x00A7, //§
+  [mdot] = 0x00B7, //·
+  [rang] = 0x299C, //⦜
+
+
+  [lshade] = 0x2591,//░
+  [mshade] = 0x2592,//▒
+  [dshade] = 0x2593,//▓
+
+  [fire] = 0x1F525, //🔥
+  [water] = 0x1F322, //🌢
+  [cleft] = 0x1F12F, //🄯
+  [baster] = 0x1F7BC, //🞼
+  [neteen] = 0x1F51E, //🔞
+  [floppy] = 0x1F5AB, //🖫
+
+	[boxemp] = 0x2610,  //☐
+	[boxchk] = 0x2611,  //☑
+	[boxX] = 0x2612,  //☒
+
+	[bbstr] = 0x23A1,  //⎡
+	[bbstl] = 0x23A4,  //⎤
+	[bbml] = 0x23A8,  //⎨
+	[bbmr] = 0x23AC,  //⎬
+	[bbmb] = 0x23AA,  //⎪
+	[bbrtr] = 0x23A7,  //⎧
+	[bbrbr] = 0x23A9,  //⎩
+	[bbrtl] = 0x23AB,  //⎫
+	[bbrbl] = 0x23AD,  //⎭
+	[bbsbr] = 0x23A3,  //⎣
+	[bbsbl] = 0x23A6,  //⎦
+	[bbmbr] = 0x23A5,  //⎥
+	[bbmbl] = 0x23A2,  //⎢
+
+  [Agrave] = 0x0300,//è //above  [wtf] = 0x1242A, //𒐪
+	[Aacute] = 0x0301,//é //1st
+  [Acircm] = 0x0302,//ê //2nd
+	[Atilde] = 0x0303,//ẽ //5th
+	[Abreve] = 0x0306,//ĕ //4th
+	[Adiaer] = 0x0308,//ë //3rd
+	[Adacut] = 0x030B,//e̋
+
+  // not all ogham letters, as I
+  // actually intend to use them for hex
+  [OS] = 0x1680,//space
+  [Oa] = 0x1681,//1
+  [Ob] = 0x1682,//2
+  [Oc] = 0x1683,//3
+  [Od] = 0x1684,//4
+  [Oe] = 0x1685,//5
+  [Of] = 0x1686,//6
+  [Og] = 0x1687,//7
+  [Oh] = 0x1688,//8
+  [Oi] = 0x1689,//9
+  [OA] = 0x168A,//A
+  [OB] = 0x168B,//B
+  [OC] = 0x168C,//C
+  [OD] = 0x168D,//D
+  [OE] = 0x168E,//E
+  [OF] = 0x168F,//F
+  [Os] = 0x169B,//Start
+  [OED] = 0x169C,//End
+  [Ox] = 0x1695,//X
+
+  [gnd] = 0x23DA,//⏚
+  [sqr] = 0x238D,//⎍, actually monostable
+  [sine] = 0x223F,//∿
+  [opt] = 0x2325,//⌥, actually option used for switch
+
+	[geq] = 0x2264,  //≤
+	[leq] = 0x2265,  //≥
+	[brkup] = 0xFE38,  //︸
+	[brkdn] = 0xFE37,  //︷
+  [perup] = 0xFE35, //︵
+  [perdn] = 0xFE36, //︶
+  //GREEKL
+  [rone] = 0x2170,  // 1:: ⅰ
+	[rtwo] = 0x2171,  // 2:: ⅱ
+	[rthree] = 0x2172,  // 3:: ⅲ
+	[rfour] = 0x2173,  // 4:: ⅳ
+	[rfive] = 0x2174,  // 5:: ⅴ
+	[rsix] = 0x2175,  // 6:: ⅵ
+	[rseven] = 0x2176,  // 7:: ⅶ
+	[reight] = 0x2177,  // 8:: ⅷ
+	[rnine] = 0x2178,  // 9:: ⅸ
+	[rten] = 0x2179,  // 0:: ⅹ
+	[gq] = 0x03B8,  // q:: θ
+	[gw] = 0x03C9,  // w:: ω
+	[ge] = 0x03B5,  // e:: ε
+	[gr] = 0x03C1,  // r:: ρ
+	[gt] = 0x03C4,  // t:: τ
+	[gy] = 0x03C8,  // y:: ψ
+	[gu] = 0x03C5,  // u:: υ
+	[gi] = 0x03B9,  // i:: ι
+	[go] = 0x03BF,  // o:: ο
+	[gp] = 0x03C0,  // p:: π
+	[ga] = 0x03B1,  // a:: α
+	[gs] = 0x03C3,  // s:: σ
+	[gd] = 0x03B4,  // d:: δ
+	[gf] = 0x03C6,  // f:: φ
+	[gg] = 0x03B3,  // g:: γ
+	[gh] = 0x03B7,  // h:: η
+	[gj] = 0x03D1,  // j:: ϑ
+	[gk] = 0x03BA,  // k:: κ
+	[gl] = 0x03BB,  // l:: λ
+	[gz] = 0x03B6,  // z:: ζ
+	[gx] = 0x03BE,  // x:: ξ
+	[gc] = 0x03C7,  // c:: χ
+	[gv] = 0x03C2,  // v:: ς
+	[gb] = 0x03B2,  // b:: β
+	[gn] = 0x03BD,  // n:: ν
+	[gm] = 0x03BC,  // m:: μ
+  //GREEKU
+	[Rone] = 0x2160,  // 1:: Ⅰ
+	[Rtwo] = 0x2161,  // 2:: Ⅱ
+	[Rthree] = 0x2162,  // 3:: Ⅲ
+	[Rfour] = 0x2163,  // 4:: Ⅳ
+	[Rfive] = 0x2164,  // 5:: Ⅴ
+	[Rsix] = 0x2165,  // 6:: Ⅵ
+	[Rseven] = 0x2166,  // 7:: Ⅶ
+	[Reight] = 0x2167,  // 8:: Ⅷ
+	[Rnine] = 0x2168,  // 9:: Ⅸ
+	[Rten] = 0x2169,  // 0:: Ⅹ
+	[Gq] = 0x0398,  // Q:: Θ
+	[Gw] = 0x03A9,  // W:: Ω
+	[Ge] = 0x0395,  // E:: Ε
+	[Gr] = 0x03A1,  // R:: Ρ
+	[Gt] = 0x03A4,  // T:: Τ
+	[Gy] = 0x03A8,  // Y:: Ψ
+	[Gu] = 0x03A5,  // U:: Υ
+	[Gi] = 0x0399,  // I:: Ι
+	[Go] = 0x039F,  // O:: Ο
+	[Gp] = 0x03A0,  // P:: Π
+	[Ga] = 0x0391,  // A:: Α
+	[Gs] = 0x03A3,  // S:: Σ
+	[Gd] = 0x0394,  // D:: Δ
+	[Gf] = 0x03A6,  // F:: Φ
+	[Gg] = 0x0393,  // G:: Γ
+	[Gh] = 0x0397,  // H:: Η
+	[Gj] = 0x004A,  // J:: J
+	[Gk] = 0x039A,  // K:: Κ
+	[Gl] = 0x039B,  // L:: Λ
+	[Gz] = 0x0396,  // Z:: Ζ
+	[Gx] = 0x039E,  // X:: Ξ
+	[Gc] = 0x03A7,  // C:: Χ
+	[Gv] = 0x0056,  // V:: V
+	[Gb] = 0x0392,  // B:: Β
+	[Gn] = 0x039D,  // N:: Ν
+	[Gm] = 0x039C,  // M:: Μ
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[BASE] = LAYOUT_ergodox(  // layer 0 : default
+        KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_GRV,
+        KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_BSLS,
+        KC_EQL, KC_A, KC_O, KC_E, KC_U, KC_I,
+        KC_LSPO, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_AMPR,
+        OSL(FNLR), TT(GREL), TT(MATH), KC_UP, KC_DOWN,
+        KC_LBRC, KC_HOME, KC_INS, KC_SPC, KC_LGUI, KC_DEL,
+
+        OSL(FNLR), KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
+        KC_PGUP, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH,
+        KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS,
+        KC_PGDN, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSPC,
+        KC_LEFT, KC_RIGHT, KC_RALT, TT(SYMB), TT(QWER),
+        KC_END, KC_RBRC, KC_PSCR, KC_RALT, KC_RCTL, KC_ENT
+),
+
+[FNLR] = LAYOUT_ergodox(
+       // left hand
+       KC_NO,   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_NO,
+       KC_NO,KC_F11, KC_F12, KC_F13,KC_F14, KC_F15,  KC_NO,
+       KC_NO,KC_F21, KC_F22, KC_F23,KC_F24, KC_NO,
+       KC_NO,KC_PAUSE,KC_PSCR,KC_SLCK,KC_NO,KC_NO,KC_NO,
+          EEP_RST,TO(BASE),TO(BASE),TO(BASE),TO(BASE),
+                                       KC_NO,KC_NO,
+                                               KC_NO,
+                               KC_NO,KC_NO,KC_NO,
+       // right hand
+       TO(BASE), KC_F6,   KC_F7,  KC_F8,   KC_F9,   KC_F10,  UC_M_LN,
+       KC_NO, KC_F16,  KC_F17,KC_F18,   KC_F19,  KC_F20,  UC_M_WI,
+                KC_NO, KC_NO,   KC_NO,    KC_NO,    KC_NO, KC_NO,
+       KC_NO, KC_NO, KC_NO,   KC_NO,    KC_NO,    KC_NO, KC_NO,
+                         KC_NO,KC_NO,  KC_NO,    KC_NO,  KC_NO,
+       KC_NO, KC_NO,
+       KC_NO,
+       KC_NO, KC_RCTL, KC_NO
+),
+
+[QWER] = LAYOUT_ergodox(
+        KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_GRV,
+        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_BSLS,
+        KC_AMPR, KC_A, KC_S, KC_D, KC_F, KC_G,
+        KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_QUOT,
+        KC_BSLS, KC_LCTL, KC_LGUI, KC_RALT, KC_APP,
+        KC_LBRC, KC_HOME, KC_PGUP, KC_SPC, KC_LSFT, KC_PGDN,
+
+        OSL(FNLR), KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
+        KC_MINS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_SLSH,
+        KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
+        KC_EQL, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC,
+        KC_UP, KC_DOWN, KC_LEFT, KC_RIGHT, TO(BASE),
+        KC_END, KC_INS, KC_DEL, KC_RGHT, KC_ENT, KC_SPC
+),
+
+[MATH] = LAYOUT_ergodox(
+	KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_GRV,
+	KC_TAB,	X(Mc),	X(Munion),	X(arwl),	X(or),	X(exists),	KC_BSLASH,
+	X(arwr), X(root), X(and), X(imply), X(nexists), X(forall),
+	KC_LSPO,	KC_SCLN,	X(intgrl),	X(Mn),	X(Mz),	X(member),	X(arwl),
+	KC_MS_L, TO(BASE), TO(BASE), KC_INS, KC_DEL,
+	KC_LBRC, KC_HOME, KC_UP, KC_SPC, KC_LGUI, KC_DOWN,
+
+	TT(FNLR), KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
+	KC_PGUP, X(plsminus),	X(infin),	X(neleof),	X(equiv),	X(Mq),	KC_EQL,
+	X(sum),	X(emtyset),	X(porp),	X(suprsetof),	X(not),	X(neq),
+	KC_PGDN,	X(subsetof),	X(intersection),	X(angl),	X(nmember),	X(eleof),	KC_RSPC,
+	KC_RCTL, KC_RALT, KC_APP, TO(BASE), TO(BASE),
+	KC_END, KC_RBRC, KC_LEFT, KC_RGHT, KC_ENT, KC_SPC
+),
+
+[SYMB] = LAYOUT_ergodox(
+	X(Os), X(Oa), X(Ob), X(Oc), X(Od), X(Oe), X(mdot),
+	X(boxemp), X(bbstr), X(bbrtr), X(bbrtl), X(bbstl), X(degree), X(brkdn),
+	X(boxchk), X(bbmbl), X(bbml), X(bbmr), X(bbmbr), X(neteen),
+	X(boxX), X(bbsbr), X(bbrbr), X(bbrbl), X(bbsbl), X(uxclm), X(brkup),
+	X(floppy), TO(BASE), TO(BASE), X(arwu), X(arwd),
+	X(fire), X(lshade), X(mshade), KC_SPC, X(OS), X(dshade),
+
+	X(Ox), X(Of), X(Og), X(Oh), X(Oi), X(OA), X(OB),
+	X(numero), X(trade), X(copy), X(cleft), X(cent), X(OED), X(OC),
+	X(Agrave), X(gnd), X(sqr), X(sine), X(opt), X(OD),
+	X(sect), X(Aacute), X(Acircm), X(Adiaer), X(Abreve), X(Atilde), X(OE),
+	X(arwl), X(arwr), X(geq), X(leq), X(OF),
+	X(rang), X(water), X(perup), X(perdn), X(baster), KC_ENT
+),
+
+[GREL] = LAYOUT_ergodox(
+	KC_ESC, X(Rone), X(Rtwo), X(Rthree), X(Rfour), X(Rfive), KC_GRV,
+	KC_TAB, KC_QUOT, KC_COMM, KC_DOT, X(gp), X(gy), KC_SLSH,
+	KC_SLSH, X(ga), X(go), X(ge), X(gu), X(gi),
+	MO(GREU), KC_SCLN, X(gq), X(gj), X(gk), X(gx), KC_AMPR,
+	KC_MS_L, TO(BASE), TO(BASE), KC_INS, KC_DEL,
+	KC_LBRC, KC_HOME, KC_UP, KC_SPC, KC_LGUI, KC_DOWN,
+
+	TO(BASE), X(Rsix), X(Rseven), X(Reight), X(Rnine), X(Rten), KC_BSPC,
+	KC_PGUP, X(gf), X(gg), X(gc), X(gr), X(gl), KC_EQL,
+	X(gd), X(gh), X(gt), X(gn), X(gs), KC_MINS,
+	KC_PGDN, X(gb), X(gm), X(gw), X(gv), X(gz), MO(GREU),
+	KC_RCTL, KC_RALT, KC_APP, TO(BASE), TO(BASE),
+	KC_END, KC_RBRC, KC_LEFT, KC_RGHT, KC_ENT, KC_SPC
+),
+
+[GREU] = LAYOUT_ergodox(
+	KC_ESC, X(Rone), X(Rtwo), X(Rthree), X(Rfour), X(Rfive), KC_GRV,
+	KC_TAB, KC_QUOT, KC_COMM, KC_DOT, X(Gp), X(Gy), KC_SLSH,
+	KC_SLSH, X(Ga), X(Go), X(Ge), X(Gu), X(Gi),
+	KC_TRNS, KC_SCLN, X(Gq), X(Gj), X(Gk), X(Gx), KC_AMPR,
+	KC_MS_L, TO(BASE), TO(BASE), KC_INS, KC_DEL,
+	KC_LBRC, KC_HOME, KC_UP, KC_SPC, KC_LGUI, KC_DOWN,
+
+	TO(BASE), X(Rsix), X(Rseven), X(Reight), X(Rnine), X(Rten), KC_BSPC,
+	KC_PGUP, X(Gf), X(Gg), X(Gc), X(Gr), X(Gl), KC_EQL,
+	X(Gd), X(Gh), X(Gt), X(Gn), X(Gs), KC_MINS,
+	KC_PGDN, X(Gb), X(Gm), X(Gw), X(Gv), X(Gz), KC_TRNS,
+	KC_RCTL, KC_RALT, KC_APP, TO(BASE), TO(BASE),
+	KC_END, KC_RBRC, KC_LEFT, KC_RGHT, KC_ENT, KC_SPC
+),
+
+};
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+
+};
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+    uint8_t layer = biton32(layer_state);
+
+    ergodox_board_led_off();
+    ergodox_right_led_1_off();
+    ergodox_right_led_2_off();
+    ergodox_right_led_3_off();
+    switch (layer) {
+      // TODO: Make this relevant to the ErgoDox EZ.
+        case 1:
+            ergodox_right_led_1_on();
+            break;
+        case 2:
+            ergodox_right_led_2_on();
+            break;
+        default:
+            // none
+            break;
+    }
+};

keyboards/ergodone/keymaps/vega/rules.mk

@@ -0,0 +1,2 @@
+UNICODE_ENABLE          = no # Unicode
+UNICODEMAP_ENABLE = yes

keyboards/ergodox_ez/ergodox_ez.c

@@ -304,4 +304,14 @@ led_config_t g_led_config = { {
     4, 4, 1, 1, 1, 1
 } };
 
+void suspend_power_down_kb(void) {
+    rgb_matrix_set_suspend_state(true);
+    suspend_power_down_user();
+}
+
+ void suspend_wakeup_init_kb(void) {
+    rgb_matrix_set_suspend_state(false);
+    suspend_wakeup_init_user();
+}
+
 #endif

keyboards/gh60/gh60.c

@@ -15,25 +15,13 @@ extern inline void gh60_wasd_leds_off(void);
 
 
 void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
 
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-		gh60_caps_led_on();
-		} else {
-		gh60_caps_led_off();
+    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+        gh60_caps_led_on();
+    } else {
+        gh60_caps_led_off();
     }
 
-    // if (usb_led & (1<<USB_LED_NUM_LOCK)) {
-		// gh60_esc_led_on();
-		// } else {
-		// gh60_esc_led_off();
-    // }
-
-    // if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
-		// gh60_fn_led_on();
-		// } else {
-		// gh60_fn_led_off();
-    // }
-
-	led_set_user(usb_led);
+    led_set_user(usb_led);
 }

keyboards/gh60/gh60.h

@@ -1,5 +1,4 @@
-#ifndef GH60_H
-#define GH60_H
+#pragma once
 
 #include "quantum.h"
 #include "led.h"
@@ -13,21 +12,35 @@
  *   B2 Capslock LED
  *   B0 not connected
  */
-inline void gh60_caps_led_on(void)      { DDRB |=  (1<<2); PORTB &= ~(1<<2); }
-inline void gh60_poker_leds_on(void)    { DDRF |=  (1<<4); PORTF &= ~(1<<4); }
-inline void gh60_fn_led_on(void)    	{ DDRF |=  (1<<5); PORTF &= ~(1<<5); }
-inline void gh60_esc_led_on(void)    	{ DDRF |=  (1<<6); PORTF &= ~(1<<6); }
-inline void gh60_wasd_leds_on(void)    	{ DDRF |=  (1<<7); PORTF &= ~(1<<7); }
+inline void gh60_caps_led_on(void)      { setPinOutput(B2); writePinLow(B2); }
+inline void gh60_poker_leds_on(void)    { setPinOutput(F4); writePinLow(F4); }
+inline void gh60_fn_led_on(void)        { setPinOutput(F5); writePinLow(F5); }
+inline void gh60_esc_led_on(void)       { setPinOutput(F6); writePinLow(F6); }
+inline void gh60_wasd_leds_on(void)     { setPinOutput(F7); writePinLow(F7); }
 
-inline void gh60_caps_led_off(void)     { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
-inline void gh60_poker_leds_off(void)   { DDRF &= ~(1<<4); PORTF &= ~(1<<4); }
-inline void gh60_fn_led_off(void)   	{ DDRF &= ~(1<<5); PORTF &= ~(1<<5); }
-inline void gh60_esc_led_off(void)   	{ DDRF &= ~(1<<6); PORTF &= ~(1<<6); }
-inline void gh60_wasd_leds_off(void)   	{ DDRF &= ~(1<<7); PORTF &= ~(1<<7); }
+inline void gh60_caps_led_off(void)     { setPinInput(B2); writePinLow(B2); }
+inline void gh60_poker_leds_off(void)   { setPinInput(F4); writePinLow(F4); }
+inline void gh60_fn_led_off(void)       { setPinInput(F5); writePinLow(F5); }
+inline void gh60_esc_led_off(void)      { setPinInput(F6); writePinLow(F6); }
+inline void gh60_wasd_leds_off(void)    { setPinInput(F7); writePinLow(F7); }
 
 /* GH60 keymap definition macro
  * K2C, K31 and  K3C are extra keys for ISO
  */
+#define LAYOUT_all( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3C, \
+    K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \
+) { \
+    { K00, K01, K02, K03,   K04,   K05, K06,   K07,   K08,   K09, K0A, K0B, K0C, K0D }, \
+    { K10, K11, K12, K13,   K14,   K15, K16,   K17,   K18,   K19, K1A, K1B, K1C, K1D }, \
+    { K20, K21, K22, K23,   K24,   K25, K26,   K27,   K28,   K29, K2A, K2B, K2C, K2D }, \
+    { K30, K31, K32, K33,   K34,   K35, K36,   K37,   K38,   K39, K3A, K3B, K3C, K3D }, \
+    { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, K4C, K4D }  \
+}
+
 #define LAYOUT( \
     K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
     K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
@@ -35,11 +48,11 @@ inline void gh60_wasd_leds_off(void)   	{ DDRF &= ~(1<<7); PORTF &= ~(1<<7); }
     K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
     K40, K41, K42,           K45,                K49, K4A, K4B, K4C, K4D  \
 ) { \
-    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
-    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
-    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
-    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \
-    { K40, K41, K42, KC_NO,    KC_NO,    K45, KC_NO,    KC_NO,    KC_NO,    K49, K4A, K4B, K4C, K4D }  \
+    { K00, K01, K02, K03,   K04,   K05, K06,   K07,   K08,   K09, K0A, K0B, K0C, K0D }, \
+    { K10, K11, K12, K13,   K14,   K15, K16,   K17,   K18,   K19, K1A, K1B, K1C, K1D }, \
+    { K20, K21, K22, K23,   K24,   K25, K26,   K27,   K28,   K29, K2A, K2B, K2C, K2D }, \
+    { K30, K31, K32, K33,   K34,   K35, K36,   K37,   K38,   K39, K3A, K3B, K3C, K3D }, \
+    { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, K4C, K4D }  \
 }
 
 /* ANSI variant. No extra keys for ISO */
@@ -47,14 +60,14 @@ inline void gh60_wasd_leds_off(void)   	{ DDRF &= ~(1<<7); PORTF &= ~(1<<7); }
     K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
     K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
     K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
-    K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,           K3D, \
+    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, \
     K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \
 ) { \
-    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
-    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
-    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO,    K2D }, \
-    { K30, KC_NO,    K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO,    K3D }, \
-    { K40, K41, K42, KC_NO,    KC_NO,    K45, KC_NO,    KC_NO,    KC_NO,    KC_NO,    K4A, K4B, K4C, K4D }  \
+    { K00, K01,   K02, K03,   K04,   K05, K06,   K07,   K08,   K09,   K0A, K0B, K0C,   K0D }, \
+    { K10, K11,   K12, K13,   K14,   K15, K16,   K17,   K18,   K19,   K1A, K1B, K1C,   K1D }, \
+    { K20, K21,   K22, K23,   K24,   K25, K26,   K27,   K28,   K29,   K2A, K2B, KC_NO, K2D }, \
+    { K30, KC_NO, K32, K33,   K34,   K35, K36,   K37,   K38,   K39,   K3A, K3B, KC_NO, K3D }, \
+    { K40, K41,   K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C,   K4D }  \
 }
 
 /* ISO variant. Remove useless ANSI keys */
@@ -65,11 +78,11 @@ inline void gh60_wasd_leds_off(void)   	{ DDRF &= ~(1<<7); PORTF &= ~(1<<7); }
     K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, \
     K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \
 ) { \
-    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
-    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, KC_NO }, \
-    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
-    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D }, \
-    { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D }  \
+    { K00, K01, K02, K03,   K04,   K05, K06,   K07,   K08,   K09,   K0A, K0B, K0C,   K0D   }, \
+    { K10, K11, K12, K13,   K14,   K15, K16,   K17,   K18,   K19,   K1A, K1B, K1C,   KC_NO }, \
+    { K20, K21, K22, K23,   K24,   K25, K26,   K27,   K28,   K29,   K2A, K2B, K2C,   K2D   }, \
+    { K30, K31, K32, K33,   K34,   K35, K36,   K37,   K38,   K39,   K3A, K3B, KC_NO, K3D   }, \
+    { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C,   K4D   }  \
 }
 
 
@@ -81,11 +94,11 @@ inline void gh60_wasd_leds_off(void)   	{ DDRF &= ~(1<<7); PORTF &= ~(1<<7); }
     K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, K3C, \
     K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \
 ) { \
-    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
-    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
-    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO,    K2D }, \
-    { K30, KC_NO,    K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \
-    { K40, K41, K42, KC_NO,    KC_NO,    K45, KC_NO,    KC_NO,    KC_NO,    K49, K4A, K4B, K4C, K4D }  \
+    { K00, K01,   K02, K03,   K04,   K05, K06,   K07,   K08,   K09, K0A, K0B, K0C,   K0D }, \
+    { K10, K11,   K12, K13,   K14,   K15, K16,   K17,   K18,   K19, K1A, K1B, K1C,   K1D }, \
+    { K20, K21,   K22, K23,   K24,   K25, K26,   K27,   K28,   K29, K2A, K2B, KC_NO, K2D }, \
+    { K30, KC_NO, K32, K33,   K34,   K35, K36,   K37,   K38,   K39, K3A, K3B, K3C,   K3D }, \
+    { K40, K41,   K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, K4C,   K4D }  \
 }
 
 /* ANSI with split Right Shift. No extra keys for ISO */
@@ -96,11 +109,9 @@ inline void gh60_wasd_leds_off(void)   	{ DDRF &= ~(1<<7); PORTF &= ~(1<<7); }
     K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, K3C, \
     K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \
 ) { \
-    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
-    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
-    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO,    K2D }, \
-    { K30, KC_NO,    K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \
-    { K40, K41, K42, KC_NO,    KC_NO,    K45, KC_NO,    KC_NO,    KC_NO,    KC_NO, K4A, K4B, K4C, K4D }  \
+    { K00, K01,   K02, K03,   K04,   K05, K06,   K07,   K08,   K09,   K0A, K0B, K0C,   K0D }, \
+    { K10, K11,   K12, K13,   K14,   K15, K16,   K17,   K18,   K19,   K1A, K1B, K1C,   K1D }, \
+    { K20, K21,   K22, K23,   K24,   K25, K26,   K27,   K28,   K29,   K2A, K2B, KC_NO, K2D }, \
+    { K30, KC_NO, K32, K33,   K34,   K35, K36,   K37,   K38,   K39,   K3A, K3B, K3C,   K3D }, \
+    { K40, K41,   K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C,   K4D }  \
 }
-
-#endif

keyboards/gh60/info.json

@@ -8,32 +8,418 @@
     "width": 15,
     "height": 5,
     "layouts": {
+        "LAYOUT_all": {
+            "key_count": 65,
+            "layout": [
+                {"label":"~", "x":0, "y":0},
+                {"label":"!", "x":1, "y":0},
+                {"label":"@", "x":2, "y":0},
+                {"label":"#", "x":3, "y":0},
+                {"label":"$", "x":4, "y":0},
+                {"label":"%", "x":5, "y":0},
+                {"label":"^", "x":6, "y":0},
+                {"label":"&", "x":7, "y":0},
+                {"label":"*", "x":8, "y":0},
+                {"label":"(", "x":9, "y":0},
+                {"label":")", "x":10, "y":0},
+                {"label":"_", "x":11, "y":0},
+                {"label":"+", "x":12, "y":0},
+                {"label":"Backspace", "x":13, "y":0},
+                {"label":"Backspace Extra", "x":14, "y":0},
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"{", "x":11.5, "y":1},
+                {"label":"}", "x":12.5, "y":1},
+                {"label":"|", "x":13.5, "y":1, "w":1.5},
+                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":":", "x":10.75, "y":2},
+                {"label":"\"", "x":11.75, "y":2},
+                {"label":"ISO Hash", "x":12.75, "y":2},
+                {"label":"Enter", "x":13.75, "y":2, "w":1.25},
+                {"label":"Shift", "x":0, "y":3, "w":1.25},
+                {"label":"ISO Backslash", "x":1.25, "y":3},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":"<", "x":9.25, "y":3},
+                {"label":">", "x":10.25, "y":3},
+                {"label":"?", "x":11.25, "y":3},
+                {"label":"Shift", "x":12.25, "y":3, "w":1.75},
+                {"label":"HHKB Fn", "x":14, "y":3},
+                {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+                {"label":"Win", "x":1.25, "y":4, "w":1.25},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.25},
+                {"label":"Space", "x":3.75, "y":4, "w":6.25},
+                {"label":"Alt", "x":10, "y":4, "w":1.25},
+                {"label":"Win", "x":11.25, "y":4, "w":1.25},
+                {"label":"Menu", "x":12.5, "y":4, "w":1.25},
+                {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
+            ]
+        },
+
         "LAYOUT": {
-                "key_count": 65,
-            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4}, {"label":"Win", "x":11, "y":4}, {"label":"Menu", "x":12, "y":4}, {"label":"Ctrl", "x":13, "y":4}, {"x":14, "y":4}]
+            "key_count": 65,
+            "layout": [
+                {"label":"~", "x":0, "y":0},
+                {"label":"!", "x":1, "y":0},
+                {"label":"@", "x":2, "y":0},
+                {"label":"#", "x":3, "y":0},
+                {"label":"$", "x":4, "y":0},
+                {"label":"%", "x":5, "y":0},
+                {"label":"^", "x":6, "y":0},
+                {"label":"&", "x":7, "y":0},
+                {"label":"*", "x":8, "y":0},
+                {"label":"(", "x":9, "y":0},
+                {"label":")", "x":10, "y":0},
+                {"label":"_", "x":11, "y":0},
+                {"label":"+", "x":12, "y":0},
+                {"label":"Backspace", "x":13, "y":0},
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"{", "x":11.5, "y":1},
+                {"label":"}", "x":12.5, "y":1},
+                {"label":"|", "x":13.5, "y":1, "w":1.5},
+                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":":", "x":10.75, "y":2},
+                {"label":"\"", "x":11.75, "y":2},
+                {"label":"ISO Hash", "x":12.75, "y":2},
+                {"label":"Enter", "x":13.75, "y":2, "w":1.25},
+                {"label":"Shift", "x":0, "y":3, "w":1.25},
+                {"label":"ISO Backslash", "x":1.25, "y":3},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":"<", "x":9.25, "y":3},
+                {"label":">", "x":10.25, "y":3},
+                {"label":"?", "x":11.25, "y":3},
+                {"label":"Shift", "x":12.25, "y":3, "w":1.75},
+                {"label":"HHKB Fn", "x":14, "y":3},
+                {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+                {"label":"Win", "x":1.25, "y":4, "w":1.25},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.25},
+                {"label":"Space", "x":3.75, "y":4, "w":6.25},
+                {"label":"Backspace Extra", "x":14, "y":0},
+                {"label":"Alt", "x":10, "y":4, "w":1.25},
+                {"label":"Win", "x":11.25, "y":4, "w":1.25},
+                {"label":"Menu", "x":12.5, "y":4, "w":1.25},
+                {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
+            ]
         },
 
         "LAYOUT_60_ansi": {
-                "key_count": 61,
-            "layout": [{"x":0, "y":0, "label":"~"}, {"x":1, "y":0, "label":"!"}, {"x":2, "y":0, "label":"@"}, {"x":3, "y":0, "label":"#"}, {"x":4, "y":0, "label":"$"}, {"x":5, "y":0, "label":"%"}, {"x":6, "y":0, "label":"^"}, {"x":7, "y":0, "label":"&"}, {"x":8, "y":0, "label":"*"}, {"x":9, "y":0, "label":"("}, {"x":10, "y":0, "label":")"}, {"x":11, "y":0, "label":"_"}, {"x":12, "y":0, "label":"+"}, {"x":13, "y":0, "label":"Backspace", "w":2}, {"x":0, "y":1, "label":"Tab", "w":1.5}, {"x":1.5, "y":1, "label":"Q"}, {"x":2.5, "y":1, "label":"W"}, {"x":3.5, "y":1, "label":"E"}, {"x":4.5, "y":1, "label":"R"}, {"x":5.5, "y":1, "label":"T"}, {"x":6.5, "y":1, "label":"Y"}, {"x":7.5, "y":1, "label":"U"}, {"x":8.5, "y":1, "label":"I"}, {"x":9.5, "y":1, "label":"O"}, {"x":10.5, "y":1, "label":"P"}, {"x":11.5, "y":1, "label":"{"}, {"x":12.5, "y":1, "label":"}"}, {"x":13.5, "y":1, "label":"|", "w":1.5}, {"x":0, "y":2, "label":"Caps Lock", "w":1.75}, {"x":1.75, "y":2, "label":"A"}, {"x":2.75, "y":2, "label":"S"}, {"x":3.75, "y":2, "label":"D"}, {"x":4.75, "y":2, "label":"F"}, {"x":5.75, "y":2, "label":"G"}, {"x":6.75, "y":2, "label":"H"}, {"x":7.75, "y":2, "label":"J"}, {"x":8.75, "y":2, "label":"K"}, {"x":9.75, "y":2, "label":"L"}, {"x":10.75, "y":2, "label":":"}, {"x":11.75, "y":2, "label":"\""}, {"x":12.75, "y":2, "label":"Enter", "w":2.25}, {"x":0, "y":3, "label":"Shift", "w":2.25}, {"x":2.25, "y":3, "label":"Z"}, {"x":3.25, "y":3, "label":"X"}, {"x":4.25, "y":3, "label":"C"}, {"x":5.25, "y":3, "label":"V"}, {"x":6.25, "y":3, "label":"B"}, {"x":7.25, "y":3, "label":"N"}, {"x":8.25, "y":3, "label":"M"}, {"x":9.25, "y":3, "label":"<"}, {"x":10.25, "y":3, "label":">"}, {"x":11.25, "y":3, "label":"?"}, {"x":12.25, "y":3, "label":"Shift", "w":2.75}, {"x":0, "y":4, "label":"Ctrl", "w":1.25}, {"x":1.25, "y":4, "label":"Win", "w":1.25}, {"x":2.5, "y":4, "label":"Alt", "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "label":"Alt", "w":1.25}, {"x":11.25, "y":4, "label":"Win", "w":1.25}, {"x":12.5, "y":4, "label":"Menu", "w":1.25}, {"x":13.75, "y":4, "label":"Ctrl", "w":1.25}]
+            "key_count": 61,
+            "layout": [
+                {"label":"~", "x":0, "y":0},
+                {"label":"!", "x":1, "y":0},
+                {"label":"@", "x":2, "y":0},
+                {"label":"#", "x":3, "y":0},
+                {"label":"$", "x":4, "y":0},
+                {"label":"%", "x":5, "y":0},
+                {"label":"^", "x":6, "y":0},
+                {"label":"&", "x":7, "y":0},
+                {"label":"*", "x":8, "y":0},
+                {"label":"(", "x":9, "y":0},
+                {"label":")", "x":10, "y":0},
+                {"label":"_", "x":11, "y":0},
+                {"label":"+", "x":12, "y":0},
+                {"label":"Backspace", "x":13, "y":0, "w":2},
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"{", "x":11.5, "y":1},
+                {"label":"}", "x":12.5, "y":1},
+                {"label":"|", "x":13.5, "y":1, "w":1.5},
+                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":":", "x":10.75, "y":2},
+                {"label":"\"", "x":11.75, "y":2},
+                {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+                {"label":"Shift", "x":0, "y":3, "w":2.25},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":"<", "x":9.25, "y":3},
+                {"label":">", "x":10.25, "y":3},
+                {"label":"?", "x":11.25, "y":3},
+                {"label":"Shift", "x":12.25, "y":3, "w":2.75},
+                {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+                {"label":"Win", "x":1.25, "y":4, "w":1.25},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.25},
+                {"label":"Space", "x":3.75, "y":4, "w":6.25},
+                {"label":"Alt", "x":10, "y":4, "w":1.25},
+                {"label":"Win", "x":11.25, "y":4, "w":1.25},
+                {"label":"Menu", "x":12.5, "y":4, "w":1.25},
+                {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
+            ]
         },
 
         "LAYOUT_60_iso": {
-                "key_count": 62,
-            "layout": [{"label":"\u00ac", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+            "key_count": 62,
+            "layout": [
+                {"label":"\u00ac", "x":0, "y":0},
+                {"label":"!", "x":1, "y":0},
+                {"label":"\"", "x":2, "y":0},
+                {"label":"\u00a3", "x":3, "y":0},
+                {"label":"$", "x":4, "y":0},
+                {"label":"%", "x":5, "y":0},
+                {"label":"^", "x":6, "y":0},
+                {"label":"&", "x":7, "y":0},
+                {"label":"*", "x":8, "y":0},
+                {"label":"(", "x":9, "y":0},
+                {"label":")", "x":10, "y":0},
+                {"label":"_", "x":11, "y":0},
+                {"label":"+", "x":12, "y":0},
+                {"label":"Backspace", "x":13, "y":0, "w":2},
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"{", "x":11.5, "y":1},
+                {"label":"}", "x":12.5, "y":1},
+                {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2},
+                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":":", "x":10.75, "y":2},
+                {"label":"@", "x":11.75, "y":2},
+                {"label":"~", "x":12.75, "y":2},
+                {"label":"Shift", "x":0, "y":3, "w":1.25},
+                {"label":"|", "x":1.25, "y":3},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":"<", "x":9.25, "y":3},
+                {"label":">", "x":10.25, "y":3},
+                {"label":"?", "x":11.25, "y":3},
+                {"label":"Shift", "x":12.25, "y":3, "w":2.75},
+                {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+                {"label":"Win", "x":1.25, "y":4, "w":1.25},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.25},
+                {"label":"Space", "x":3.75, "y":4, "w":6.25},
+                {"label":"AltGr", "x":10, "y":4, "w":1.25},
+                {"label":"Win", "x":11.25, "y":4, "w":1.25},
+                {"label":"Menu", "x":12.5, "y":4, "w":1.25},
+                {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
+            ]
         },
 
         "LAYOUT_60_ansi_split_bs_rshift": {
-                "key_count": 63,
-            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":6}, {"label":"Alt", "x":10, "y":4, "w":1.5}, {"label":"Win", "x":11.5, "y":4}, {"label":"Menu", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}]
+            "key_count": 63,
+            "layout": [
+                {"label":"~", "x":0, "y":0},
+                {"label":"!", "x":1, "y":0},
+                {"label":"@", "x":2, "y":0},
+                {"label":"#", "x":3, "y":0},
+                {"label":"$", "x":4, "y":0},
+                {"label":"%", "x":5, "y":0},
+                {"label":"^", "x":6, "y":0},
+                {"label":"&", "x":7, "y":0},
+                {"label":"*", "x":8, "y":0},
+                {"label":"(", "x":9, "y":0},
+                {"label":")", "x":10, "y":0},
+                {"label":"_", "x":11, "y":0},
+                {"label":"+", "x":12, "y":0},
+                {"label":"Backspace", "x":13, "y":0},
+                {"label":"Backspace Extra", "x":14, "y":0},
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"{", "x":11.5, "y":1},
+                {"label":"}", "x":12.5, "y":1},
+                {"label":"|", "x":13.5, "y":1, "w":1.5},
+                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":":", "x":10.75, "y":2},
+                {"label":"\"", "x":11.75, "y":2},
+                {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+                {"label":"Shift", "x":0, "y":3, "w":2.25},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":"<", "x":9.25, "y":3},
+                {"label":">", "x":10.25, "y":3},
+                {"label":"?", "x":11.25, "y":3},
+                {"label":"Shift", "x":12.25, "y":3, "w":1.75},
+                {"label":"HHKB Fn", "x":14, "y":3},
+                {"label":"Ctrl", "x":0, "y":4, "w":1.5},
+                {"label":"Win", "x":1.5, "y":4},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.5},
+                {"label":"Space", "x":4, "y":4, "w":6},
+                {"label":"Alt", "x":10, "y":4, "w":1.5},
+                {"label":"Win", "x":11.5, "y":4},
+                {"label":"Menu", "x":12.5, "y":4},
+                {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}
+            ]
         },
 
         "LAYOUT_60_ansi_split_rshift": {
             "key_count": 62,
-            "layout": [{"label":"K00", "x":0, "y":0}, {"label":"K01", "x":1, "y":0}, {"label":"K02", "x":2, "y":0}, {"label":"K03", "x":3, "y":0}, {"label":"K04", "x":4, "y":0}, {"label":"K05", "x":5, "y":0}, {"label":"K06", "x":6, "y":0}, {"label":"K07", "x":7, "y":0}, {"label":"K08", "x":8, "y":0}, {"label":"K09", "x":9, "y":0}, {"label":"K0A", "x":10, "y":0}, {"label":"K0B", "x":11, "y":0}, {"label":"K0C", "x":12, "y":0}, {"label":"K0D", "x":13, "y":0, "w":2}, {"label":"K10", "x":0, "y":1, "w":1.5}, {"label":"K11", "x":1.5, "y":1}, {"label":"K12", "x":2.5, "y":1}, {"label":"K13", "x":3.5, "y":1}, {"label":"K14", "x":4.5, "y":1}, {"label":"K15", "x":5.5, "y":1}, {"label":"K16", "x":6.5, "y":1}, {"label":"K17", "x":7.5, "y":1}, {"label":"K18", "x":8.5, "y":1}, {"label":"K19", "x":9.5, "y":1}, {"label":"K1A", "x":10.5, "y":1}, {"label":"K1B", "x":11.5, "y":1}, {"label":"K1C", "x":12.5, "y":1}, {"label":"K1D", "x":13.5, "y":1, "w":1.5}, {"label":"K20", "x":0, "y":2, "w":1.75}, {"label":"K21", "x":1.75, "y":2}, {"label":"K22", "x":2.75, "y":2}, {"label":"K23", "x":3.75, "y":2}, {"label":"K24", "x":4.75, "y":2}, {"label":"K25", "x":5.75, "y":2}, {"label":"K26", "x":6.75, "y":2}, {"label":"K27", "x":7.75, "y":2}, {"label":"K28", "x":8.75, "y":2}, {"label":"K29", "x":9.75, "y":2}, {"label":"K2A", "x":10.75, "y":2}, {"label":"K2B", "x":11.75, "y":2}, {"label":"K2D", "x":12.75, "y":2, "w":2.25}, {"label":"K30", "x":0, "y":3, "w":2.25}, {"label":"K32", "x":2.25, "y":3}, {"label":"K33", "x":3.25, "y":3}, {"label":"K34", "x":4.25, "y":3}, {"label":"K35", "x":5.25, "y":3}, {"label":"K36", "x":6.25, "y":3}, {"label":"K37", "x":7.25, "y":3}, {"label":"K38", "x":8.25, "y":3}, {"label":"K39", "x":9.25, "y":3}, {"label":"K3A", "x":10.25, "y":3}, {"label":"K3B", "x":11.25, "y":3}, {"label":"K3D", "x":12.25, "y":3, "w":1.75}, {"label":"K3C", "x":14, "y":3}, {"label":"K40", "x":0, "y":4, "w":1.25}, {"label":"K41", "x":1.25, "y":4, "w":1.25}, {"label":"K42", "x":2.5, "y":4, "w":1.25}, {"label":"K45", "x":3.75, "y":4, "w":6.25}, {"label":"K4A", "x":10, "y":4, "w":1.25}, {"label":"K4B", "x":11.25, "y":4, "w":1.25}, {"label":"K4C", "x":12.5, "y":4, "w":1.25}, {"label":"K4D", "x":13.75, "y":4, "w":1.25}]
+            "layout": [
+                {"label":"~", "x":0, "y":0},
+                {"label":"!", "x":1, "y":0},
+                {"label":"@", "x":2, "y":0},
+                {"label":"#", "x":3, "y":0},
+                {"label":"$", "x":4, "y":0},
+                {"label":"%", "x":5, "y":0},
+                {"label":"^", "x":6, "y":0},
+                {"label":"&", "x":7, "y":0},
+                {"label":"*", "x":8, "y":0},
+                {"label":"(", "x":9, "y":0},
+                {"label":")", "x":10, "y":0},
+                {"label":"_", "x":11, "y":0},
+                {"label":"+", "x":12, "y":0},
+                {"label":"Backspace", "x":13, "y":0, "w":2},
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"{", "x":11.5, "y":1},
+                {"label":"}", "x":12.5, "y":1},
+                {"label":"|", "x":13.5, "y":1, "w":1.5},
+                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":":", "x":10.75, "y":2},
+                {"label":"\"", "x":11.75, "y":2},
+                {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+                {"label":"Shift", "x":0, "y":3, "w":2.25},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":"<", "x":9.25, "y":3},
+                {"label":">", "x":10.25, "y":3},
+                {"label":"?", "x":11.25, "y":3},
+                {"label":"Shift", "x":12.25, "y":3, "w":1.75},
+                {"label":"HHKB Fn", "x":14, "y":3},
+                {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+                {"label":"Win", "x":1.25, "y":4, "w":1.25},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.25},
+                {"label":"Space", "x":3.75, "y":4, "w":6.25},
+                {"label":"Alt", "x":10, "y":4, "w":1.25},
+                {"label":"Win", "x":11.25, "y":4, "w":1.25},
+                {"label":"Menu", "x":12.5, "y":4, "w":1.25},
+                {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
+            ]
         }
     }
 }
-
-
-

keyboards/gh60/keymaps/default/keymap.c

@@ -2,47 +2,30 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-  /* 0: qwerty */
-  LAYOUT(
-    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_GRV,
-    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
-    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NO,   KC_ENT,
-    KC_LSFT, TG(2),   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MO(1),   KC_RSFT,
-    KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                             KC_BSLS, KC_RALT, KC_RGUI, KC_APP,  KC_RCTL
-  ),
-  /* 1: fn */
-  LAYOUT(
-    KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______,
-    _______, _______, KC_UP,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-    _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-    _______, _______, _______,                   _______,                            _______, _______, _______, _______, _______
-  ),
+    [0] = LAYOUT_all( /* 0: qwerty */
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NO,   KC_ENT,
+        KC_LSFT, TG(2),   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),
+        KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                                      KC_RALT, KC_RGUI, KC_APP,  KC_RCTL
+    ),
 
-    /* 2: arrows */
-  LAYOUT(
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP,
-    _______, _______, _______,                   _______,                            _______, _______, KC_LEFT, KC_DOWN, KC_RGHT
-  ),
+    [1] = LAYOUT_all( /* 1: fn */
+        KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______,
+        _______, _______, KC_UP,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,                   _______,                                     _______, _______, _______, _______
+    ),
 
-};
+    [2] = LAYOUT_all( /* 2: arrows */
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP,   _______,
+        _______, _______, _______,                   _______,                                     _______, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
 
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-  // MACRODOWN only works in this function
-      switch(id) {
-        case 0:
-          if (record->event.pressed) {
-            register_code(KC_RSFT);
-          } else {
-            unregister_code(KC_RSFT);
-          }
-        break;
-      }
-    return MACRO_NONE;
 };
 
 void matrix_scan_user(void) {

keyboards/gh60/readme.md

@@ -13,7 +13,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make gh60:default
 
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
 
 
 ## GH60 Hardware Information

keyboards/gingham/config.h

@@ -0,0 +1,250 @@
+/*
+Copyright 2019 Yiancar
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+#define VENDOR_ID       0x8968
+#define PRODUCT_ID      0x4748
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Yiancar-Designs
+#define PRODUCT         Gingham
+#define DESCRIPTION     A 65 persent keyboard with only through hole components
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+
+/* A Custom matrix.c is used to poll the port expander C6 shows that the pins are hardwired there */
+#define MATRIX_ROW_PINS { D0, C3, D1, C1, C2 }
+#define MATRIX_COL_PINS { D4, D4, C0, B5, D5, B4, D6, B1, B0, B2, D7, B3, D4, D4 }
+#define UNUSED_PINS
+#define PORT_EXPANDER_ADDRESS 0x20
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define NO_UART 1
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 0
+

keyboards/gingham/gingham.c

@@ -0,0 +1,40 @@
+/* Copyright 2019 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "gingham.h"
+#include "i2c_master.h"
+
+uint8_t send_data;
+
+void matrix_init_kb(void) {
+    // Due to the way the port expander is setup both LEDs are already outputs. This is set n matrix.copy
+    //Turn the red LED on as power indicator.
+    send_data = 0x10;
+    i2c_writeReg((PORT_EXPANDER_ADDRESS << 1), 0x09, &send_data, 1, 20);
+
+    matrix_init_user();
+}
+
+void led_set_kb(uint8_t usb_led) {
+    // Bit 3 is Green LED, bit 4 is Red LED.
+    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+        send_data = 0x18;
+    } else {
+        send_data = 0x10;
+    }
+    i2c_writeReg((PORT_EXPANDER_ADDRESS << 1), 0x09, &send_data, 1, 20);
+
+    led_set_user(usb_led);
+}

keyboards/gingham/gingham.h

@@ -0,0 +1,49 @@
+/* Copyright 2019 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define XXX KC_NO
+
+#include "quantum.h"
+
+#define LAYOUT_60_iso_split_bs_rshift( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K1D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,      \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
+    K40, K41, K42,                K46,                K4A, K4B, K4C, K4D  \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \
+    { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, K4A, K4B, K4C, K4D }  \
+}
+
+#define LAYOUT_60_ansi_split_bs_rshift( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K1D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
+    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
+    K40, K41, K42,                K46,                K4A, K4B, K4C, K4D  \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
+    { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \
+    { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, K4A, K4B, K4C, K4D }  \
+}

keyboards/gingham/info.json

@@ -0,0 +1,15 @@
+{
+    "keyboard_name": "Gingham", 
+    "url": "https://yiancar-designs.com/product/gingham/", 
+    "maintainer": "Yiancar", 
+    "width": 15, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT_60_ansi_split_bs_rshift": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Back", "x":13, "y":0}, {"label":"Delete", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Shift", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Fn", "x":11.25, "y":4, "w":1.25}, {"label":"App", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+        },
+		"LAYOUT_60_iso_split_bs_rshift": {
+			"layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Back", "x":13, "y":0}, {"label":"Delete", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"ISO Hash", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"ISO \\", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Shift", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Fn", "x":11.25, "y":4, "w":1.25}, {"label":"App", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+        }
+    }
+}

keyboards/gingham/keymaps/default/keymap.c

@@ -0,0 +1,60 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+//This is the ANSI version of the PCB
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_60_ansi_split_bs_rshift( /* Base */
+    KC_GESC,  KC_1,     KC_2,     KC_3,  KC_4,  KC_5,  KC_6,    KC_7,  KC_8,  KC_9,     KC_0,     KC_MINS,  KC_EQL,  KC_BSPC, KC_DEL,
+    KC_TAB,   KC_Q,     KC_W,     KC_E,  KC_R,  KC_T,  KC_Y,    KC_U,  KC_I,  KC_O,     KC_P,     KC_LBRC,  KC_RBRC, KC_BSLS,
+    KC_CAPS,  KC_A,     KC_S,     KC_D,  KC_F,  KC_G,  KC_H,    KC_J,  KC_K,  KC_L,     KC_SCLN,  KC_QUOT,           KC_ENT, 
+    KC_LSFT,            KC_Z,     KC_X,  KC_C,  KC_V,  KC_B,    KC_N,  KC_M,  KC_COMM,  KC_DOT,   KC_SLSH,  KC_RSFT, KC_RSFT,
+    KC_LCTL,  KC_LGUI,  KC_LALT,                       KC_SPC,                          KC_RALT,  MO(1)  ,  KC_APP,  KC_RCTL),
+
+[1] = LAYOUT_60_ansi_split_bs_rshift( /* FN */
+    KC_GRV,   KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   KC_TRNS, KC_TRNS,
+    KC_TRNS,  KC_TRNS,  KC_UP,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  RESET,    KC_TRNS,
+    KC_TRNS,  KC_LEFT,  KC_DOWN,  KC_RGHT,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,            KC_TRNS,
+    KC_TRNS,            KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+    KC_VOLU,  KC_VOLD,  KC_MUTE,                                KC_TRNS,                                KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS),
+
+[2] = LAYOUT_60_ansi_split_bs_rshift( /* Empty for dynamic keymaps */
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,            KC_TRNS,
+    KC_TRNS,            KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+    KC_TRNS,  KC_TRNS,  KC_TRNS,                                KC_TRNS,                                KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS),
+
+[3] = LAYOUT_60_ansi_split_bs_rshift( /* Empty for dynamic keymaps */
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,            KC_TRNS,
+    KC_TRNS,            KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+    KC_TRNS,  KC_TRNS,  KC_TRNS,                                KC_TRNS,                                KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS),
+};
+
+void matrix_init_user(void) {
+  //user initialization
+}
+
+void matrix_scan_user(void) {
+  //user matrix
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}

keyboards/gingham/keymaps/default/readme.md

@@ -0,0 +1,6 @@
+The default keymap for Gingham
+==============================
+
+![Layout image](https://i.imgur.com/WwOVJTh.jpg)
+
+Default layer is normal ANSI and Fn layer is used for Volume control and arrow cluster.

keyboards/gingham/keymaps/iso/keymap.c

@@ -0,0 +1,60 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+//This is the ISO version of the PCB
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_60_iso_split_bs_rshift( /* Base */
+    KC_GESC,  KC_1,     KC_2,     KC_3,  KC_4,  KC_5,  KC_6,    KC_7,  KC_8,  KC_9,     KC_0,     KC_MINS,  KC_EQL,  KC_BSPC, KC_DEL,
+    KC_TAB,   KC_Q,     KC_W,     KC_E,  KC_R,  KC_T,  KC_Y,    KC_U,  KC_I,  KC_O,     KC_P,     KC_LBRC,  KC_RBRC,         
+    KC_CAPS,  KC_A,     KC_S,     KC_D,  KC_F,  KC_G,  KC_H,    KC_J,  KC_K,  KC_L,     KC_SCLN,  KC_QUOT,  KC_NUHS, KC_ENT, 
+    KC_LSFT,  KC_NUBS,  KC_Z,     KC_X,  KC_C,  KC_V,  KC_B,    KC_N,  KC_M,  KC_COMM,  KC_DOT,   KC_SLSH,  KC_RSFT, KC_RSFT,
+    KC_LCTL,  KC_LGUI,  KC_LALT,                       KC_SPC,                          KC_RALT,  MO(1)  ,  KC_APP,  KC_RCTL),
+
+[1] = LAYOUT_60_iso_split_bs_rshift( /* FN */
+    KC_GRV,   KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   KC_TRNS, KC_TRNS,
+    KC_TRNS,  KC_TRNS,  KC_UP,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  RESET  ,          
+    KC_TRNS,  KC_LEFT,  KC_DOWN,  KC_RGHT,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+    KC_VOLU,  KC_VOLD,  KC_MUTE,                                KC_TRNS,                                KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS),
+
+[2] = LAYOUT_60_iso_split_bs_rshift( /* Empty for dynamic keymaps */
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,          
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+    KC_TRNS,  KC_TRNS,  KC_TRNS,                                KC_TRNS,                                KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS),
+
+[3] = LAYOUT_60_iso_split_bs_rshift( /* Empty for dynamic keymaps */
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,          
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+    KC_TRNS,  KC_TRNS,  KC_TRNS,                                KC_TRNS,                                KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS),
+};
+
+void matrix_init_user(void) {
+  //user initialization
+}
+
+void matrix_scan_user(void) {
+  //user matrix
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}

keyboards/gingham/keymaps/iso/readme.md

@@ -0,0 +1,6 @@
+The default keymap for ISO Gingham
+==================================
+
+![Layout image](https://i.imgur.com/WwOVJTh.jpg)
+
+Default layer is normal ISO and Fn layer is used for Volume control and arrow cluster

keyboards/gingham/matrix.c

@@ -0,0 +1,247 @@
+/*
+Copyright 2012-2019 Jun Wako, Jack Humbert, Yiancar
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include <stdbool.h>
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "debounce.h"
+#include "quantum.h"
+#include "i2c_master.h"
+
+#if (MATRIX_COLS <= 8)
+#    define print_matrix_header()  print("\nr/c 01234567\n")
+#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop(matrix[i])
+#    define ROW_SHIFTER ((uint8_t)1)
+#elif (MATRIX_COLS <= 16)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse16(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop16(matrix[i])
+#    define ROW_SHIFTER ((uint16_t)1)
+#elif (MATRIX_COLS <= 32)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse32(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop32(matrix[i])
+#    define ROW_SHIFTER  ((uint32_t)1)
+#endif
+
+#ifdef MATRIX_MASKED
+    extern const matrix_row_t matrix_mask[];
+#endif
+
+static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t raw_matrix[MATRIX_ROWS]; //raw values
+static matrix_row_t matrix[MATRIX_ROWS]; //debounced values
+
+__attribute__ ((weak))
+void matrix_init_quantum(void) {
+    matrix_init_kb();
+}
+
+__attribute__ ((weak))
+void matrix_scan_quantum(void) {
+    matrix_scan_kb();
+}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void) {
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void) {
+    return MATRIX_COLS;
+}
+
+//Deprecated.
+bool matrix_is_modified(void)
+{
+    if (debounce_active()) return false;
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    // Matrix mask lets you disable switches in the returned matrix data. For example, if you have a
+    // switch blocker installed and the switch is always pressed.
+#ifdef MATRIX_MASKED
+    return matrix[row] & matrix_mask[row];
+#else
+    return matrix[row];
+#endif
+}
+
+void matrix_print(void)
+{
+    print_matrix_header();
+
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        print_matrix_row(row);
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += matrix_bitpop(i);
+    }
+    return count;
+}
+
+static void select_row(uint8_t row)
+{
+    setPinOutput(row_pins[row]);
+    writePinLow(row_pins[row]);
+}
+
+static void unselect_row(uint8_t row)
+{
+    setPinInputHigh(row_pins[row]);
+}
+
+static void unselect_rows(void)
+{
+    for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
+        setPinInput(row_pins[x]);
+    }
+}
+
+static void init_pins(void) {
+    unselect_rows();
+    // Set I/O
+    uint8_t send_data = 0x07;
+    i2c_writeReg((PORT_EXPANDER_ADDRESS << 1), 0x00, &send_data, 1, 20);
+    // // Set Pull-up
+    i2c_writeReg((PORT_EXPANDER_ADDRESS << 1), 0x06, &send_data, 1, 20);
+
+    for (uint8_t x = 0; x < MATRIX_COLS; x++) {
+        if ( (x > 0) && (x < 12) ) {
+        setPinInputHigh(col_pins[x]);
+        }
+    }
+}
+
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
+{
+    // Store last value of row prior to reading
+    matrix_row_t last_row_value = current_matrix[current_row];
+
+    // Clear data in matrix row
+    current_matrix[current_row] = 0;
+
+    // Select row and wait for row selecton to stabilize
+    select_row(current_row);
+    wait_us(30);
+
+    // For each col...
+    for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+        uint8_t pin_state;
+        // Select the col pin to read (active low)
+        switch (col_index) {
+            case 0 :
+                i2c_readReg((PORT_EXPANDER_ADDRESS << 1), 0x09, &pin_state, 1, 20);
+                pin_state = pin_state & 0x01;
+                break;
+            case 12 :
+                i2c_readReg((PORT_EXPANDER_ADDRESS << 1), 0x09, &pin_state, 1, 20);
+                pin_state = pin_state & (1 << 2);
+                break;
+            case 13 :
+                i2c_readReg((PORT_EXPANDER_ADDRESS << 1), 0x09, &pin_state, 1, 20);
+                pin_state = pin_state & (1 << 1);
+                break;
+            default :
+                pin_state = readPin(col_pins[col_index]);
+        }
+
+        // Populate the matrix row with the state of the col pin
+        current_matrix[current_row] |=  pin_state ? 0 : (ROW_SHIFTER << col_index);
+    }
+
+    // Unselect row
+    unselect_row(current_row);
+
+    return (last_row_value != current_matrix[current_row]);
+}
+
+void matrix_init(void) {
+
+    // Initialize I2C
+    i2c_init();
+
+    // initialize key pins
+    init_pins();
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        raw_matrix[i] = 0;
+        matrix[i] = 0;
+    }
+
+    debounce_init(MATRIX_ROWS);
+
+    matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void)
+{
+    bool changed = false;
+
+    // Set row, read cols
+    for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) {
+        changed |= read_cols_on_row(raw_matrix, current_row);
+    }
+
+    debounce(raw_matrix, matrix, MATRIX_ROWS, changed);
+
+    matrix_scan_quantum();
+    return (uint8_t)changed;
+}

keyboards/gingham/readme.md

@@ -0,0 +1,22 @@
+# Gingham
+
+![gingham](https://yiancar-designs.com/wp-content/uploads/2019/06/IMG_20190625_233619.jpg)
+
+A 60% keyboard with only through hole components.   
+
+Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [github](https://github.com/yiancar)  
+Hardware Supported: ATMEGA328p with vusb [PCB](https://github.com/yiancar/gingham_pcb)  
+Hardware Availability: https://yiancar-designs.com/, https://novelkeys.xyz, https://mechboards.co.uk/  
+
+Make example for this keyboard (after setting up your build environment):
+    make gingham:default
+
+Flash firmware:
+    // In bootloader mode
+    make gingham:default:program
+
+Bootloader:
+use usbasploader HSGW's my repository.
+https://github.com/hsgw/USBaspLoader/tree/plaid
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).