Fix for Solid Reactive mode bug (#5846)

derp, forgot to remove the pragma once

Makefile

@@ -534,6 +534,8 @@ endef
 %:
 	# Check if we have the CMP tool installed
 	cmp $(ROOT_DIR)/Makefile $(ROOT_DIR)/Makefile >/dev/null 2>&1; if [ $$? -gt 0 ]; then printf "$(MSG_NO_CMP)"; exit 1; fi;
+	# Ensure that python3 is installed. This check can be removed after python is used in more places.
+	if ! python3 --version 1> /dev/null 2>&1; then printf "$(MSG_PYTHON_MISSING)"; fi
 	# Check if the submodules are dirty, and display a warning if they are
 ifndef SKIP_GIT
 	if [ ! -e lib/chibios ]; then git submodule sync lib/chibios && git submodule update --depth 1 --init lib/chibios; fi

docs/feature_macros.md

@@ -230,7 +230,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 void matrix_scan_user(void) {     # The very important timer. 
   if (is_alt_tab_active) {
     if (timer_elapsed(alt_tab_timer) > 1000) {
-      unregister_code16(LALT(KC_TAB));
+      unregister_code(KC_LALT);
       is_alt_tab_active = false;
     }
   }

docs/feature_rgb_matrix.md

@@ -30,9 +30,11 @@ Configure the hardware via your `config.h`:
 #define DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 25
 #define DRIVER_2_LED_TOTAL 24
-#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL
+#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
 ```
 
+!> Note the parentheses, this is so when `DRIVER_LED_TOTAL` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`.
+
 Currently only 2 drivers are supported, but it would be trivial to support all 4 combinations.
 
 Define these arrays listing all the LEDs in your `<keyboard>.c`:
@@ -124,21 +126,25 @@ Configure the hardware via your `config.h`:
 
 ---
 
-From this point forward the configuration is the same for all the drivers. The struct rgb_led array tells the system for each led, what key electrical matrix it represents, what the physical position is on the board, and if the led is for a modifier key or not. Here is a brief example:
+From this point forward the configuration is the same for all the drivers. The `led_config_t` struct provides a key electrical matrix to led index lookup table, what the physical position of each LED is on the board, and what type of key or usage the LED if the LED represents. Here is a brief example:
 
 ```C
-rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
-/*  {row | col << 4}
-    *    |         {x=0..224, y=0..64}
-    *    |            |              flags
-    *    |            |                | */
-    {{0|(0<<4)},   {20.36*0, 21.33*0}, 1},
-    {{0|(1<<4)},   {20.36*1, 21.33*0}, 4},
-    ....
-}
+const led_config_t g_led_config = { {
+  // Key Matrix to LED Index
+  {   5, NO_LED, NO_LED,   0 },
+  { NO_LED, NO_LED, NO_LED, NO_LED },
+  {   4, NO_LED, NO_LED,   1 },
+  {   3, NO_LED, NO_LED,   2 }
+}, {
+  // LED Index to Physical Position
+  { 188,  16 }, { 187,  48 }, { 149,  64 }, { 112,  64 }, {  37,  48 }, {  38,  16 }
+}, {
+  // LED Index to Flag
+  1, 4, 4, 4, 4, 1
+} };
 ```
 
-The first part, `{row | col << 4}`, tells the system what key this LED represents by using the key's electrical matrix row & col. The second part, `{x=0..224, y=0..64}` represents the LED's physical position on the keyboard. The `x` is between (inclusive) 0-224, and `y` is between (inclusive) 0-64 as the effects are based on this range. The easiest way to calculate these positions is imagine your keyboard is a grid, and the top left of the keyboard represents x, y coordinate 0, 0 and the bottom right of your keyboard represents 224, 64. Using this as a basis, you can use the following formula to calculate the physical position:
+The first part, `// Key Matrix to LED Index`, tells the system what key this LED represents by using the key's electrical matrix row & col. The second part, `// LED Index to Physical Position` represents the LED's physical position on the keyboard. The first value, `x`, is between 0-224 (inclusive), and the second value, `y`, is between 0-64 (inclusive). This range is due to effect that calculate the center or halves for their animations. The easiest way to calculate these positions is imagine your keyboard is a grid, and the top left of the keyboard represents x, y coordinate 0, 0 and the bottom right of your keyboard represents 224, 64. Using this as a basis, you can use the following formula to calculate the physical position:
 
 ```C
 x = 224 / (NUMBER_OF_COLS - 1) * COL_POSITION
@@ -147,7 +153,7 @@ y =  64 / (NUMBER_OF_ROWS - 1) * ROW_POSITION
 
 Where NUMBER_OF_COLS, NUMBER_OF_ROWS, COL_POSITION, & ROW_POSITION are all based on the physical layout of your keyboard, not the electrical layout.
 
-`flags` is a bitmask, whether or not a certain LEDs is of a certain type. It is recommended that LEDs are set to only 1 type.
+`// LED Index to Flag` is a bitmask, whether or not a certain LEDs is of a certain type. It is recommended that LEDs are set to only 1 type.
 
 ## Flags
 
@@ -155,8 +161,8 @@ Where NUMBER_OF_COLS, NUMBER_OF_ROWS, COL_POSITION, & ROW_POSITION are all based
 |------------------------------------|-------------------------------------------|
 |`#define HAS_FLAGS(bits, flags)`    |Returns true if `bits` has all `flags` set.|
 |`#define HAS_ANY_FLAGS(bits, flags)`|Returns true if `bits` has any `flags` set.|
-|`#define LED_FLAG_NONE      0x00`   |If thes LED has no flags.                  |
-|`#define LED_FLAG_ALL       0xFF`   |If thes LED has all flags.                 |
+|`#define LED_FLAG_NONE      0x00`   |If this LED has no flags.                  |
+|`#define LED_FLAG_ALL       0xFF`   |If this LED has all flags.                 |
 |`#define LED_FLAG_MODIFIER  0x01`   |If the Key for this LED is a modifier.     |
 |`#define LED_FLAG_UNDERGLOW 0x02`   |If the LED is for underglow.               |
 |`#define LED_FLAG_KEYLIGHT  0x04`   |If the LED is for key backlight.           |
@@ -191,13 +197,18 @@ enum rgb_matrix_effects {
     RGB_MATRIX_CYCLE_ALL,           // Full keyboard solid hue cycling through full gradient
     RGB_MATRIX_CYCLE_LEFT_RIGHT,    // Full gradient scrolling left to right
     RGB_MATRIX_CYCLE_UP_DOWN,       // Full gradient scrolling top to bottom
+    RGB_MATRIX_CYCLE_OUT_IN,        // Full gradient scrolling out to in
+    RGB_MATRIX_CYCLE_OUT_IN_DUAL,   // Full dual gradients scrolling out to in
     RGB_MATRIX_RAINBOW_MOVING_CHEVRON,  // Full gradent Chevron shapped scrolling left to right
     RGB_MATRIX_DUAL_BEACON,         // Full gradient spinning around center of keyboard
     RGB_MATRIX_RAINBOW_BEACON,      // Full tighter gradient spinning around center of keyboard
     RGB_MATRIX_RAINBOW_PINWHEELS,   // Full dual gradients spinning two halfs of keyboard
     RGB_MATRIX_RAINDROPS,           // Randomly changes a single key's hue
     RGB_MATRIX_JELLYBEAN_RAINDROPS, // Randomly changes a single key's hue and saturation
+#if define(RGB_MATRIX_FRAMEBUFFER_EFFECTS)
+    RGB_MATRIX_TYPING_HEATMAP,      // How hot is your WPM!
     RGB_MATRIX_DIGITAL_RAIN,        // That famous computer simulation
+#endif
 #if defined(RGB_MATRIX_KEYPRESSES) || defined(RGB_MATRIX_KEYRELEASES)
     RGB_MATRIX_SOLID_REACTIVE_SIMPLE,   // Pulses keys hit to hue & value then fades value out
     RGB_MATRIX_SOLID_REACTIVE,      // Static single hue, pulses keys hit to shifted hue then fades to current hue
@@ -227,12 +238,15 @@ You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `con
 |`#define DISABLE_RGB_MATRIX_CYCLE_ALL`                 |Disables `RGB_MATRIX_CYCLE_ALL`                |
 |`#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT`          |Disables `RGB_MATRIX_CYCLE_LEFT_RIGHT`         |
 |`#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN`             |Disables `RGB_MATRIX_CYCLE_UP_DOWN`            |
+|`#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN`              |Disables `RGB_MATRIX_CYCLE_OUT_IN`             |
+|`#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL`         |Disables `RGB_MATRIX_CYCLE_OUT_IN_DUAL`        |
 |`#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON`    |Disables `RGB_MATRIX_RAINBOW_MOVING_CHEVRON`   |
 |`#define DISABLE_RGB_MATRIX_DUAL_BEACON`               |Disables `RGB_MATRIX_DUAL_BEACON`              |
 |`#define DISABLE_RGB_MATRIX_RAINBOW_BEACON`            |Disables `RGB_MATRIX_RAINBOW_BEACON`           |
 |`#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS`         |Disables `RGB_MATRIX_RAINBOW_PINWHEELS`        |
 |`#define DISABLE_RGB_MATRIX_RAINDROPS`                 |Disables `RGB_MATRIX_RAINDROPS`                |
 |`#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS`       |Disables `RGB_MATRIX_JELLYBEAN_RAINDROPS`      |
+|`#define DISABLE_RGB_MATRIX_TYPING_HEATMAP`            |Disables `RGB_MATRIX_TYPING_HEATMAP`           |
 |`#define DISABLE_RGB_MATRIX_DIGITAL_RAIN`              |Disables `RGB_MATRIX_DIGITAL_RAIN`             |
 |`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE`            |Disables `RGB_MATRIX_SOLID_REACTIVE`           |
 |`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE`     |Disables `RGB_MATRIX_SOLID_REACTIVE_SIMPLE`    |

docs/feature_rgblight.md

@@ -37,9 +37,9 @@ QMK uses [Hue, Saturation, and Value](https://en.wikipedia.org/wiki/HSL_and_HSV)
 
 <img src="gitbook/images/color-wheel.svg" alt="HSV Color Wheel" width="250"/>
 
-Changing the **Hue** cycles around the circle.  
-Changing the **Saturation** moves between the inner and outer sections of the wheel, affecting the intensity of the color.  
-Changing the **Value** sets the overall brightness.
+Changing the **Hue** cycles around the circle.<br>
+Changing the **Saturation** moves between the inner and outer sections of the wheel, affecting the intensity of the color.<br>
+Changing the **Value** sets the overall brightness.<br>
 
 ## Keycodes
 
@@ -77,8 +77,7 @@ Your RGB lighting can be configured by placing these `#define`s in your `config.
 |`RGBLIGHT_SLEEP`     |*Not defined*|If defined, the RGB lighting will be switched off when the host goes to sleep|
 |`RGBLIGHT_SPLIT`     |*Not defined*|If defined, synchronization functionality for split keyboards is added|
 
-## Animations
-
+## Effects and Animations
 
 Not only can this lighting be whatever color you want,
 if `RGBLIGHT_EFFECT_xxxx` or `RGBLIGHT_ANIMATIONS` is defined, you also have a number of animation modes at your disposal:
@@ -100,29 +99,54 @@ Check out [this video](https://youtube.com/watch?v=VKrpPAHlisY) for a demonstrat
 
 Note: For versions older than 0.6.117, The mode numbers were written directly. In `quantum/rgblight.h` there is a contrast table between the old mode number and the current symbol.
 
-The following options can be used to tweak the various animations:
+### Effect and Animation Toggles
+
+Use these defines to add or remove animations from the firmware. When you are running low on flash space, it can be helpful to disable animations you are not using.
+
+|Define                              |Default      |Description                                                                          |
+|------------------------------------|-------------|-------------------------------------------------------------------------------------|
+|`RGBLIGHT_ANIMATIONS`               |*Not defined*|Enable all additional animation modes.                                   |
+|`RGBLIGHT_EFFECT_ALTERNATING`       |*Not defined*|Enable alternating animation mode.                                       |
+|`RGBLIGHT_EFFECT_BREATHING`         |*Not defined*|Enable breathing animation mode.                                         |
+|`RGBLIGHT_EFFECT_CHRISTMAS`         |*Not defined*|Enable christmas animation mode.                                         |
+|`RGBLIGHT_EFFECT_KNIGHT`            |*Not defined*|Enable knight animation mode.                                            |
+|`RGBLIGHT_EFFECT_RAINBOW_MOOD`      |*Not defined*|Enable rainbow mood animation mode.                                      |
+|`RGBLIGHT_EFFECT_RAINBOW_SWIRL`     |*Not defined*|Enable rainbow swirl animation mode.                                     |
+|`RGBLIGHT_EFFECT_RGB_TEST`          |*Not defined*|Enable RGB test animation mode.                                          |
+|`RGBLIGHT_EFFECT_SNAKE`             |*Not defined*|Enable snake animation mode.                                             |
+|`RGBLIGHT_EFFECT_STATIC_GRADIENT`   |*Not defined*|Enable static gradient mode.                                             |
+
+### Effect and Animation Settings
+
+The following options are used to tweak the various animations:
 
 |Define                              |Default      |Description                                                                          |
 |------------------------------------|-------------|-------------------------------------------------------------------------------------|
-|`RGBLIGHT_EFFECT_BREATHING`         |*Not defined*|If defined, enable breathing animation mode.                                         |
-|`RGBLIGHT_EFFECT_RAINBOW_MOOD`      |*Not defined*|If defined, enable rainbow mood animation mode.                                      |
-|`RGBLIGHT_EFFECT_RAINBOW_SWIRL`     |*Not defined*|If defined, enable rainbow swirl animation mode.                                     |
-|`RGBLIGHT_EFFECT_SNAKE`             |*Not defined*|If defined, enable snake animation mode.                                             |
-|`RGBLIGHT_EFFECT_KNIGHT`            |*Not defined*|If defined, enable knight animation mode.                                            |
-|`RGBLIGHT_EFFECT_CHRISTMAS`         |*Not defined*|If defined, enable christmas animation mode.                                         |
-|`RGBLIGHT_EFFECT_STATIC_GRADIENT`   |*Not defined*|If defined, enable static gradient mode.                                             |
-|`RGBLIGHT_EFFECT_RGB_TEST`          |*Not defined*|If defined, enable RGB test animation mode.                                          |
-|`RGBLIGHT_EFFECT_ALTERNATING`       |*Not defined*|If defined, enable alternating animation mode.                                       |
-|`RGBLIGHT_ANIMATIONS`               |*Not defined*|If defined, enables all additional animation modes                                   |
 |`RGBLIGHT_EFFECT_BREATHE_CENTER`    |*Not defined*|If defined, used to calculate the curve for the breathing animation. Valid values are 1.0 to 2.7 |
 |`RGBLIGHT_EFFECT_BREATHE_MAX`       |`255`        |The maximum brightness for the breathing mode. Valid values are 1 to 255             |
-|`RGBLIGHT_EFFECT_SNAKE_LENGTH`      |`4`          |The number of LEDs to light up for the "Snake" animation                             |
-|`RGBLIGHT_EFFECT_KNIGHT_LENGTH`     |`3`          |The number of LEDs to light up for the "Knight" animation                            |
-|`RGBLIGHT_EFFECT_KNIGHT_OFFSET`     |`0`          |The number of LEDs to start the "Knight" animation from the start of the strip by    |
-|`RGBLIGHT_EFFECT_KNIGHT_LED_NUM`    |`RGBLED_NUM` |The number of LEDs to have the "Knight" animation travel                             |
 |`RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL`|`1000`       |How long to wait between light changes for the "Christmas" animation, in milliseconds|
 |`RGBLIGHT_EFFECT_CHRISTMAS_STEP`    |`2`          |The number of LEDs to group the red/green colors by for the "Christmas" animation    |
+|`RGBLIGHT_EFFECT_KNIGHT_LED_NUM`    |`RGBLED_NUM` |The number of LEDs to have the "Knight" animation travel                             |
+|`RGBLIGHT_EFFECT_KNIGHT_LENGTH`     |`3`          |The number of LEDs to light up for the "Knight" animation                            |
+|`RGBLIGHT_EFFECT_KNIGHT_OFFSET`     |`0`          |The number of LEDs to start the "Knight" animation from the start of the strip by    |
 |`RGBLIGHT_RAINBOW_SWIRL_RANGE`      |`360`        |Range adjustment for the rainbow swirl effect to get different swirls                |
+|`RGBLIGHT_EFFECT_SNAKE_LENGTH`      |`4`          |The number of LEDs to light up for the "Snake" animation                             |
+
+### Example Usage to Reduce Memory Footprint
+  1. Remove `RGBLIGHT_ANIMATIONS` from `config.h`.
+  1. Selectively add the animations you want to enable. The following would enable two animations and save about 4KiB:
+
+```diff
+ #undef RGBLED_NUM
+-#define RGBLIGHT_ANIMATIONS
++#define RGBLIGHT_EFFECT_STATIC_GRADIENT
++#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+ #define RGBLED_NUM 12
+ #define RGBLIGHT_HUE_STEP 8
+ #define RGBLIGHT_SAT_STEP 8
+```
+
+### Animation Speed
 
 You can also modify the speeds that the different modes animate at:
 

docs/feature_space_cadet.md

@@ -39,15 +39,15 @@ By default Space Cadet assumes a US ANSI layout, but if your layout uses differe
 |`LSPO_KEYS`     |`KC_LSFT, LSPO_MOD, LSPO_KEY`  |Send `KC_LSFT` when held, the mod and  key defined by `LSPO_MOD` and `LSPO_KEY`. |
 |`RSPC_KEYS`     |`KC_RSFT, RSPC_MOD, RSPC_KEY`  |Send `KC_RSFT` when held, the mod and  key defined by `RSPC_MOD` and `RSPC_KEY`. |
 |`LCPO_KEYS`     |`KC_LCTL, KC_LCTL, KC_9`       |Send `KC_LCTL` when held, the mod `KC_LCTL` with the key `KC_9` when tapped.     |
-|`RCPO_KEYS`     |`KC_RCTL, KC_RCTL, KC_0`       |Send `KC_RCTL` when held, the mod `KC_RCTL` with the key `KC_0` when tapped.     |
+|`RCPC_KEYS`     |`KC_RCTL, KC_RCTL, KC_0`       |Send `KC_RCTL` when held, the mod `KC_RCTL` with the key `KC_0` when tapped.     |
 |`LAPO_KEYS`     |`KC_LALT, KC_LALT, KC_9`       |Send `KC_LALT` when held, the mod `KC_LALT` with the key `KC_9` when tapped.     |
-|`RAPO_KEYS`     |`KC_RALT, KC_RALT, KC_0`       |Send `KC_RALT` when held, the mod `KC_RALT` with the key `KC_0` when tapped.     |
+|`RAPC_KEYS`     |`KC_RALT, KC_RALT, KC_0`       |Send `KC_RALT` when held, the mod `KC_RALT` with the key `KC_0` when tapped.     |
 |`SFTENT_KEYS`   |`KC_RSFT, KC_TRNS, SFTENT_KEY` |Send `KC_RSFT` when held, no mod with the key `SFTENT_KEY` when tapped.          |
 
 
 ## Obsolete Configuration
 
-These defines are used in the above defines internally to support backwards compatibility, so you may continue to use them, however the above defines open up a larger range of flexibility than before. As an example, say you want to not send any modifier when you tap just `KC_LSPO`, with the old defines you had an all or nothing choice of using the `DISABLE_SPACE_CADET_MODIFIER` define. Now you can define that key as: `#define KC_LSPO_KEYS KC_LSFT, KC_TRNS, KC_9`. This tells the system to set Left Shift if held or used with other keys, then on tap send no modifier (transparent) with the `KC_9`
+These defines are used in the above defines internally to support backwards compatibility, so you may continue to use them, however the above defines open up a larger range of flexibility than before. As an example, say you want to not send any modifier when you tap just `KC_LSPO`, with the old defines you had an all or nothing choice of using the `DISABLE_SPACE_CADET_MODIFIER` define. Now you can define that key as: `#define LSPO_KEYS KC_LSFT, KC_TRNS, KC_9`. This tells the system to set Left Shift if held or used with other keys, then on tap send no modifier (transparent) with the `KC_9`.
 
 |Define                        |Default      |Description                                                       |
 |------------------------------|-------------|------------------------------------------------------------------|

docs/features.md

@@ -25,7 +25,7 @@ QMK has a staggering number of features for building your keyboard. It can take
 * [PS2 Mouse](feature_ps2_mouse.md) - Driver for connecting a PS/2 mouse directly to your keyboard.
 * [RGB Light](feature_rgblight.md) - RGB lighting for your keyboard.
 * [RGB Matrix](feature_rgb_matrix.md) - RGB Matrix lights for per key lighting.
-* [Space Cadet](feature_space_cadet_shift.md) - Use your left/right shift keys to type parenthesis and brackets.
+* [Space Cadet](feature_space_cadet.md) - Use your left/right shift keys to type parenthesis and brackets.
 * [Stenography](feature_stenography.md) - Put your keyboard into Plover mode for stenography use.
 * [Swap Hands](feature_swap_hands.md) - Mirror your keyboard for one handed usage.
 * [Tap Dance](feature_tap_dance.md) - Make a single key do as many things as you want.

docs/newbs_testing_debugging.md

@@ -13,9 +13,9 @@ Note: These programs are not provided by or endorsed by QMK.
 * [Keyboard Tester](http://www.keyboardtester.com) (Web Based)
 * [Keyboard Checker](http://keyboardchecker.com) (Web Based)
 
-## Debugging With QMK Toolbox
+## Debugging
 
-[QMK Toolbox](https://github.com/qmk/qmk_toolbox) will show messages from your keyboard if you have `CONSOLE_ENABLE = yes` in your `rules.mk`. By default the output is very limited, but you can turn on debug mode to increase the amount of debug output. Use the `DEBUG` keycode in your keymap, use the [Command](feature_command.md) feature to enable debug mode, or add the following code to your keymap.
+Your keyboard will output debug information if you have `CONSOLE_ENABLE = yes` in your `rules.mk`. By default the output is very limited, but you can turn on debug mode to increase the amount of debug output. Use the `DEBUG` keycode in your keymap, use the [Command](feature_command.md) feature to enable debug mode, or add the following code to your keymap.
 
 ```c
 void keyboard_post_init_user(void) {
@@ -27,6 +27,14 @@ void keyboard_post_init_user(void) {
 }
 ```
 
+### Debugging With QMK Toolbox
+
+For compatible platforms, [QMK Toolbox](https://github.com/qmk/qmk_toolbox) can be used to display debug messages from your keyboard.
+
+### Debugging With hid_listen
+
+Prefer a terminal based solution? [hid_listen](https://www.pjrc.com/teensy/hid_listen.html), provided by PJRC, can also be used to display debug messages. Prebuilt binaries for Windows,Linux,and MacOS are available.
+
 <!-- FIXME: Describe the debugging messages here. -->
 
 ## Sending Your Own Debug Messages
@@ -41,3 +49,51 @@ After that you can use a few different print functions:
 * `uprintf("%s string", var)`: Print a formatted string
 * `dprint("string")` Print a simple string, but only when debug mode is enabled
 * `dprintf("%s string", var)`: Print a formatted string, but only when debug mode is enabled
+
+## Debug Examples
+
+Below is a collection of real world debugging examples. For additional information, refer to [Debugging/Troubleshooting QMK](faq_debug.md).
+
+### Which matrix position is this keypress?
+
+When porting, or when attempting to diagnose pcb issues, it can be useful to know if a keypress is scanned correctly. To enable logging for this scenario, add the following code to your keymaps `keymap.c`
+
+```c
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  // If console is enabled, it will print the matrix position and status of each key pressed
+#ifdef CONSOLE_ENABLE
+    uprintf("KL: kc: %u, col: %u, row: %u, pressed: %u\n", keycode, record->event.key.col, record->event.key.row, record->event.pressed);
+#endif 
+  return true;
+}
+```
+
+Example output
+```text
+Waiting for device:.......
+Listening:
+KL: kc: 169, col: 0, row: 0, pressed: 1
+KL: kc: 169, col: 0, row: 0, pressed: 0
+KL: kc: 174, col: 1, row: 0, pressed: 1
+KL: kc: 174, col: 1, row: 0, pressed: 0
+KL: kc: 172, col: 2, row: 0, pressed: 1
+KL: kc: 172, col: 2, row: 0, pressed: 0
+```
+
+### How long did it take to scan for a keypress?
+
+When testing performance issues, it can be useful to know the frequency at which the switch matrix is being scanned. To enable logging for this scenario, add the following code to your keymaps `config.h`
+
+```c
+#define DEBUG_MATRIX_SCAN_RATE
+```
+
+Example output
+```text
+  > matrix scan frequency: 315
+  > matrix scan frequency: 313
+  > matrix scan frequency: 316
+  > matrix scan frequency: 316
+  > matrix scan frequency: 316
+  > matrix scan frequency: 316
+```

docs/zh-cn/contributing.md

@@ -0,0 +1,205 @@
+# 如何做贡献
+
+👍🎉 首先感谢各位百忙之中抽空阅读本文档，并为我们无私奉献。给您点赞啦！ 🎉👍
+
+第三方的帮助让Q酱成长了许多呢，Q酱也从你们那学到了不少新东西。Q酱希望每一个想帮助我的人都能很方便的做出有用的贡献。在这里我给摩拳擦掌的你们写了一点引导，让你们的代码在不对我做重大改动的情况下都能成功的被采纳哦。
+
+* [项目概况](#项目概况)
+* [代码规范](#代码规范)
+* [一般教程](#一般教程)
+* [行为守则对于我来说有何意义?](#行为守则对于我来说有何意义?)
+
+## 这文章巨长无比不想读啊! 我就想问个问题而已!
+
+您要是想问关于Q酱的问题的话可以在[OLKB Subreddit](https://reddit.com/r/olkb)或者是[Discord](https://discord.gg/Uq7gcHh)随意问。
+
+请记住:
+
+* 维护Q酱的小可爱有的时候可能会有点忙，不能及时回答您的问题，耐心等等，他们都是很nice的人呀。
+* 维护Q酱的人都是很无私的善良的人。无论是贡献代码还是回答问题，都是义务的。有时见到他们努力回答各种问题，解决各种BUG，Q酱也是很心疼的。
+* 您可以看看下面的教程，可以让您的问题浅显易懂，更容易回答：
+  * https://opensource.com/life/16/10/how-ask-technical-questions
+  * http://www.catb.org/esr/faqs/smart-questions.html
+
+# 项目概况
+
+Q酱很大一部分是用C语言组成的，不过有一小部分特性是C++的。怎么说呢，都是我的一部分，两个我都爱。Q酱一般是在键盘上的嵌入式处理器那里工作的，尤其与AVR([LUFA](http://www.fourwalledcubicle.com/LUFA.php))和ARM ([ChibiOS](http://www.chibios.com))两小哥哥搭配，干活不累，嘻嘻。如果您精通Arduino的话您会发现很多熟悉的概念，但也有点不爽，因为您以前的经验可能没法用来帮助Q酱。
+
+<!-- 需要修正: 这里放些学习C语言的资源。另外感谢修正的小可爱。谢谢您了。-->
+
+# Q酱，我在哪能帮助你嘞?
+
+您要是有问题的话可以 [提出一个issue](https://github.com/qmk/qmk_firmware/issues) 或 [在Discord上交流一下](https://discord.gg/Uq7gcHh).
+
+# Q酱，我如何帮助你?
+
+您以前是否没为开源贡献过代码，而又想知道帮助Q酱是怎么一回事? 稍安勿躁，咱给您总结一下！
+
+0. 先注册一个 [GitHub](https://github.com) 账户。
+1. 做好一个你要贡献的布局，那就要 [找一个你想解决的问题](https://github.com/qmk/qmk_firmware/issues)，或者 [找一个你想添加的特性](https://github.com/qmk/qmk_firmware/issues?q=is%3Aopen+is%3Aissue+label%3Afeature)。
+2. 把关联着问题的仓库分叉（fork）到你的仓库。这样你在`你的GitHub用户名/qmk_firmware`就有一个仓库备份啦。
+3. 使用 `git clone https://github.com/此处添GitHub用户名/此处添仓库名.git`这个命令把仓库同步到你的电脑中。
+4. 您要是想开发一个新特性的话可以先创建一个issue和Q酱的维护者讨论一下您要做什么。
+5. 使用`git checkout -b 此处写分支名字（别用汉字）`命令来创建一个分支（branch）用于开发。
+6. 对要解决的问题或要添加的特性进行适当的更改。
+7. 使用 `git add 把改变的文件的目录写这里` 可以添加改变的文件内容到git用于管理工程状态的索引（快照）里。
+8. 使用 `git commit -m "这里写修改的相关信息"` 来描述你做出了什么修改。
+9. 使用 `git push origin 此处写分支名字`来把你的更改同步到GitHub库里（反正不是打篮球那个库里）。
+10. 提交一个[QMK 固件的pull request](https://github.com/qmk/qmk_firmware/pull/new/master)。
+11. 给你的pull request拟一个标题，包括简短的描述和问题或错误代码。比如, 你可以起一个这样的"Added more log outputting to resolve #4352"（最好用英语，毕竟Q酱的中文也不是那么的溜，有可能会看不懂中文）。
+12. 在描述（description）里面写你做了哪些更改，你的代码里还存在什么问题, 或者你想问维护的小可爱们的问题。你的your pull request有点小问题无伤大雅(本来也没有完美的代码嘛), 维护的小可爱们会竭尽全力帮您改进的！
+13. 维护人员审查代码可能需要一些时间。
+14. 维护人员会通知您要更改什么地方，然后您就按照建议改一改。
+15. 预祝您合并成功！
+
+# 代码规范
+
+其实也没有什么特别严格的规范啦，但是俗话说的好：没有规矩，不成方圆。您可以看一下您的要改动的代码周围的画风，然后保持队形。如果你感觉周围都不知道是什么牛鬼蛇神的话就看看下面的建议：
+
+* 我们用肆(4)个空格来缩进(软件中也可以设置到Tab键)
+* 我们使用改良的1TBS(允许单行样式)
+  * 左大括号: 在开放性语句块那行的末尾
+  * 右大括号: 和开放性语句块第一个字母对齐
+  * Else If: 将右大括号放在行的开头，下一个左大括号放在同一行的结尾
+  * 可选大括号: 可选大括号是必选的
+    * 应该这样: if (condition) { return false; }
+    * 不应该这样: if (condition) return false;
+* 建议使用C语言风格的注释: `/* */`
+  * 把注释想象成一个描述特征的故事
+  * 充分使用注释来描述你为何这样修改
+  * 有些公认的东西就不要写到注释里面了
+  * 如果你不知道注释是否多余,看下面
+* 一般不要主动换行，主动换行的话每行不要超过76列
+* 要把 `#pragma once` 放到头文件的开始哦，抛弃老土的(`#ifndef THIS_FILE_H`, `#define THIS_FILE_H`, ..., `#endif`)吧
+* 下面两种预处理命令都可以用: `#ifdef DEFINED` 还有 `#if defined(DEFINED)`
+  * 以上那句对处女座不是很友好哈，处女座的朋友们就别纠结了，直接 `#if defined(DEFINED)` 。
+  * 还有就是选好一种风格就一直用，一直用一直爽，不要朝三暮四, 除非你要变化到多重条件的 `#if`。
+  * `#` 和 `if`要挨在一起哦，再让本空格在中间冒充电灯泡本空格会生气的。
+  * 以下是缩进规则:
+    * 首先考虑可读性，强迫症的朋友们总想要保持代码的高一致性，这样可不好。
+    * 保证文件已有风格不变。如果代码本来就是杂糅风格，那就见机行事，让你的修改更有意义些。
+    * 其实你也可以在缩进的时候看看周围其他代码，然后范水模山，预处理命令可以有自己的缩进风格。
+
+可以参照下面:
+
+```c
+/* foo 的 Enums*/
+enum foo_state {
+  FOO_BAR,
+  FOO_BAZ,
+};
+
+/* 有返回值的情况 */
+int foo(void) {
+  if (some_condition) {
+    return FOO_BAR;
+  } else {
+    return -1;
+  }
+}
+```
+
+# Clang-format的自动格式化
+[Clang-format](https://clang.llvm.org/docs/ClangFormat.html) 是LLVM的一部分，可以帮你自动格式化代码。我们给你准备好了一个适用于以上规范的配置文件，会帮你调整缩进和换行，你只需要写好括号就好。有了它，你再也不用担心调整代码格式太耗时，没有时间陪伴自己（虚构）的另一半了。
+
+使用[LLVM 完整安装](http://llvm.org/builds/)可以在Windows上安装clang-format, Ubuntu用户要用`sudo apt install clang-format`。
+
+命令行的朋友们, 加上 `-style=file`选项就会自动在QMK的根目录寻找.clang-format配置文件了。
+
+VSCode用户, 标准的 C/C++ 插件就支持clang-format, 或者可以用[独立扩展](https://marketplace.visualstudio.com/items?itemName=LLVMExtensions.ClangFormat)也行。
+
+有些东西(比如LAYOUT宏) 会被clang-format打乱，所以那些文件就别用clang-format了,这里就教您一个小窍门，在`// clang-format off` 和 `//clang-format on`之间装上会被搞乱的代码就好了。
+
+# 一般教程
+
+你可以给Q酱的不同部分添砖加瓦，但也要用不同的方法严谨检查。不论你修改哪里最好还是看看下边。
+
+* 将PR（pull request）分成一个个的逻辑单元。 比如，不要一次将两个新特性PR出去。要添加的特性排好队，一个一个来。
+* 提交之前看一眼，`git diff --check`的空格一定要写对了
+* 确定你的代码能通过编译
+  * 布局: 确定`make keyboard:your_new_keymap` 不返回错误
+  * 键盘: 确定 `make keyboard:all` 不返回错误
+  * 核心代码: 确定 `make all` 不返回错误
+* 提交的信息尽量明确。第一行写点简短介绍(每行不多于70个英文字母), 第二行空着,第三行和后面就要写些必要的细节了。最好用英文写，比如:
+
+```
+Adjust the fronzlebop for the kerpleplork
+
+The kerpleplork was intermittently failing with error code 23. The root cause was the fronzlebop setting, which causes the kerpleplork to activate every N iterations.
+
+Limited experimentation on the devices I have available shows that 7 is high enough to avoid confusing the kerpleplork, but I'd like to get some feedback from people with ARM devices to be sure.
+```
+
+## 文档
+
+想帮助Q酱当然是先看文档最简单了。找到这个文档哪里错了然后改正它对于你来说超级简单! 我们也对有写文档能力的人求贤若渴，如果你是对的人[点这个](#Q酱，我在哪能帮助你嘞?)!
+
+文档呢，都静静的放在`qmk_firmware/docs` 目录里, 也或者您想为网页做贡献的话也是可以的哦。
+
+在文档中附代码案例时, 先观察文档其他地方的命名规范。比如, 把enums的名字都改成像`my_layers`或者`my_keycodes`来防止名字不一致的enums被当作特务枪毙:
+
+```c
+enum my_layers {
+  _FIRST_LAYER,
+  _SECOND_LAYER
+};
+
+enum my_keycodes {
+  FIRST_LAYER = SAFE_RANGE,
+  SECOND_LAYER
+};
+```
+
+## 布局
+
+大多数QMK新手都从创建一个自己的布局开始。我们尽力保证布局规范宽松 (毕竟布局是个性的体现) 不过建议遵守以下准则，这样可以让别人更好理解你的代码
+
+* 用 [模板](documentation_templates.md)写个`readme.md`。
+* 所有的布局PR都会被squash, 如果你想知道你的提交是怎么被squash的那你就自己来吧
+* 不要把新特性和布局一起PR。可以分别PR他们
+* 布局文件夹就不要放`Makefile`了，这个操作都过时啦
+* 更新文件头部的copyrights(看`%YOUR_NAME%`那)
+
+## 键盘
+
+QMK的最终归宿是键盘。有些键盘是社区维护的，有一些是制作这些键盘的人维护的。`readme.md`会告诉你是谁维护了这个键盘，如果你对某个键盘有疑问，可以 [创建一个Issue](https://github.com/qmk/qmk_firmware/issues) 来问一问维护者。
+
+我们建议你按下面的来操作:
+
+* 用[模板](documentation_templates.md)写`readme.md`。
+* 提交数量尽量合理，不然我们可就要把你的PR给squash了。
+* 不要把新特性和新键盘一起PR。可以分别PR他们
+* 用父文件夹的名字命名 `.c`/`.h`文件, 比如`/keyboards/<kb1>/<kb2>/<kb2>.[ch]`
+* 键盘文件夹就不要放`Makefile`了，这个操作都过时啦
+* 更新文件头部的copyrights(看`%YOUR_NAME%`那)
+
+## Quantum/TMK 核心
+
+在您废寝忘食地开发Q酱新特性或者帮Q酱驱虫之前，一定要确保你的工作是有意义的。看看[了解QMK](understanding_qmk.md)你会对Q酱有更深的了解，这个文档将带你领略QMK的程序流程。现在你应该和维护团对谈谈来了解实现你想法的最佳方法了。一下渠道都可以：
+
+* [在Discord交流](https://discord.gg/Uq7gcHh)
+* [建立一个Issue](https://github.com/qmk/qmk_firmware/issues/new)
+
+新特性和BUG的修复影响所有键盘。开发组也在翻修QMK。所以，在实施重大返修之前一定要讨论一下。如果你在没有事先与维护团队沟通的情况下提交了一个PR，而且你的选择与维护团队的计划方向不符，那你可能要面临大改了。
+
+修复BUG或者开发新特性之前看看这个：
+
+* **默认不启用** - QMK运行的芯片多数内存有限，所以首要考虑的还应该是布局不要被破坏，于是特性默认是不启用的。你喜欢什么特性的话就打开它，如果你觉得有些特性应该默认开启或者你能帮助缩减代码，那就联系维护组吧。
+* **提交之前在本地编译** - 这个简直就是家喻户晓了，但是也确实需要编译啊！ 我们的Travis系统会发现一切问题，但是自己编译一下可要比在线等快多了。
+* **注意版本和芯片平台** - 有那么几个键盘有支持不同配置甚至是不同芯片的版本。试着写一个能AVR和ARM两个平台运行的特性，或者在不支持的平台自动禁用。
+* **解释你的新特性** - 在`docs/`写个文档, 你可以创建新文档或者写到现有文档中。如果你不把它记录下来，其他人就无法从你的努力中获益。
+
+也可以看看以下建议：
+
+* 提交数量尽量合理，不然我们可就要把你的PR给squash了。
+* 不要把新特性、布局和键盘一起PR。可以分别PR他们。
+* 给你的特性写[单元测试](unit_testing.md)。
+* 你编辑的文件风格要一致，如果风格不明确或者是混搭风的，你就要先看看[代码规范](#代码规范)确认情况。
+
+## 重构
+
+为了保持QMK脉络清晰，Q酱打算深入规划重构一下自己，然后让合作者进行修改。如果你有重构的思路或建议[创建一个issue](https://github.com/qmk/qmk_firmware/issues), Q酱很乐意讨论一下怎么改进一下。
+
+# 行为守则对于我来说有何意义?
+
+我们的[行为守则](https://github.com/qmk/qmk_firmware/blob/master/CODE_OF_CONDUCT.md) 是说明您有责任尊重和礼貌地对待项目中的每个人，无论他们的身份如何。 如果你是我们行为准则所描述的不当行为的受害者，我们将站在你这边，并按照行为准则对施暴者进行适当谴责。

docs/zh-cn/faq.md

@@ -0,0 +1,6 @@
+# 常见问题
+
+* [一般问题](faq_general.md)
+* [构建和编译QMK](faq_build.md)
+* [QMK调试和故障排除](faq_debug.md)
+* [布局问题](faq_keymap.md)

docs/zh-cn/getting_started_getting_help.md

@@ -0,0 +1,15 @@
+# 获得帮助
+
+有很多方法来获得关于QMK的帮助.
+
+## 实时聊天
+
+你可以在我们的主要[Discord服务器](https://discord.gg/Uq7gcHh)找到QMK的开发者和用户。有很多讨论固件的不同频道, 工具箱(Toolbox), 硬件,配置工具(configurator).
+
+## OLKB Subreddit
+
+QMK的官方论坛是[/r/olkb](https://reddit.com/r/olkb) 在[reddit.com](https://reddit.com)上.
+
+## Github的Issue
+
+你可以在GitHub上 [提出issue](https://github.com/qmk/qmk_firmware/issues).当您的问题需要长期讨论或调试时，这尤其方便。

docs/zh-cn/getting_started_github.md

@@ -0,0 +1,59 @@
+# 如何在QMK中使用Github
+
+Github can be a little tricky to those that aren't familiar with it - this guide will walk through each step of forking, cloning, and submitting a pull request with QMK.
+
+?> 本教程假设您已安装GitHub，并且您喜欢使用命令行工作。
+
+首先 [Github上的QMK页面](https://github.com/qmk/qmk_firmware), 您能看到右上方有个按钮写着"Fork":
+
+![从Github上分叉](http://i.imgur.com/8Toomz4.jpg)
+
+如果你是某组织成员，你将需要选择分叉到哪个账户。一般情况下, 你是想要分叉到你的私人账户下。当你完成分叉 (有时需要等一会), 点击"Clone or Download" 按钮:
+
+!从Github下载](http://i.imgur.com/N1NYcSz.jpg)
+
+你要选择 "HTTPS", 然后选择链接复制:
+
+![HTTPS链接](http://i.imgur.com/eGO0ohO.jpg)
+
+然后，在命令行输入`git clone `，然后粘贴你的链接:
+
+```
+user@computer:~$ git clone https://github.com/whoeveryouare/qmk_firmware.git
+Cloning into 'qmk_firmware'...
+remote: Counting objects: 46625, done.
+remote: Compressing objects: 100% (2/2), done.
+remote: Total 46625 (delta 0), reused 0 (delta 0), pack-reused 46623
+Receiving objects: 100% (46625/46625), 84.47 MiB | 3.14 MiB/s, done.
+Resolving deltas: 100% (29362/29362), done.
+Checking out files: 100% (2799/2799), done.
+```
+
+现在你本地计算机有QMK的分叉了,你可以添加你的布局了, 为你的键盘编译并刷新固件吧。如果你觉得你的修改很不错, 你可以添加,提交,然后想你的分叉推出（pull）你的改变，像这样:
+
+```
+user@computer:~$ git add .
+user@computer:~$ git commit -m "adding my keymap"
+[master cccb1608] adding my keymap
+ 1 file changed, 1 insertion(+)
+ create mode 100644 keyboards/planck/keymaps/mine/keymap.c
+user@computer:~$ git push
+Counting objects: 1, done.
+Delta compression using up to 4 threads.
+Compressing objects: 100% (1/1), done.
+Writing objects: 100% (1/1), 1.64 KiB | 0 bytes/s, done.
+Total 1 (delta 1), reused 0 (delta 0)
+remote: Resolving deltas: 100% (1/1), completed with 1 local objects.
+To https://github.com/whoeveryouare/qmk_firmware.git
+ + 20043e64...7da94ac5 master -> master
+```
+
+现在你的改动已经在你Github上的分支中了 - 如果你回到这 (`https://github.com/你的GitHub账户名/qmk_firmware`) ,你可以点击下方所示按钮创建 "New Pull Request":
+
+![新的 Pull Request](http://i.imgur.com/DxMHpJ8.jpg)
+
+现在你可以看到你所做的一切 - 如果看起来不错, 就可以点击 "Create Pull Request"定稿了:
+
+![创建Pull Request](http://i.imgur.com/Ojydlaj.jpg)
+
+提交后,我们会开跟你说你的改动,要求您进行更改, 并最终接受您的更改!感谢您为QMK做的贡献 :)

docs/zh-cn/getting_started_introduction.md

@@ -1,54 +1,54 @@
-# 介绍
-
-本页解释了使用QMK项目所需的基本信息。它假定您能熟练使用Unix shell，但您不熟悉C语言也不熟悉使用make编译。
-
-## 基本QMK结构
-
-QMK是[Jun Wako](https://github.com/tmk)的[tmk_keyboard](https://github.com/tmk/tmk_keyboard)工程的一个分叉。经过更改的TMK原始代码放在`tmk` 文件夹中。 QMK增加的新东西可以在 `quantum` 文件夹中找到。 键盘项目可以在 `handwired`（手动飞线） 和 `keyboard`（PCB键盘）这两个文件夹找到。
-
-### 用户空间结构
-
-在`users`文件夹里面的目录是每个用户的目录。这个文件夹里面放的是用户们在不同键盘都能用到的代码。详见[用户空间特性](feature_userspace.md) 
-
-### 键盘项目结构
-
-在`keyboards`文件夹和他的子文件夹`handwired`中就是各个键盘的项目了，比如`qmk_firmware/keyboards/clueboard`。内部结构与如下:
-
-* `keymaps/`: 可以构建的不同布局
-* `rules.mk`: 用来设置 "make" 命令默认选项的文件。别直接编辑这个文件,你应该使用具体某个布局的 `rules.mk`.
-* `config.h`: 用于设置默认编译选项的文件。别直接编辑这个文件, 你应该使用具体某个布局的 `config.h`.
-
-### 布局结构
-
-在各个布局的文件夹，你能找到以下文件。只有 `keymap.c` 是必要的, 如果其他文件找不到就会直接选择默认选项。
-
-* `config.h`: 配置布局的选项
-* `keymap.c`: 布局的全部代码, 必要文件
-* `rules.mk`: 使能的QMK特性
-* `readme.md`:介绍你的布局,告诉别人怎么使用，附上功能说明。请将图片上传到imgur等图床（译者注：imgur可能已被墙，为了方便国人访问，建议使用国内可以直接访问的图床）。
-
-# `config.h` 文件
-
-有三个重要的`config.h` 位置:
-
-* 键盘 (`/keyboards/<keyboard>/config.h`)
-* 用户空间 (`/users/<user>/config.h`)
-* 布局 (`/keyboards/<keyboard>/keymaps/<keymap>/config.h`)
-
-构建系统按照上述顺序自动获取配置文件。如果要覆盖由上一个 `config.h` 所做的设置，您需要首先为要更改的设置包含一些样板代码。
-
-```
-#pragma once
-```
-
-要覆盖上一个 `config.h` 所做的设置，你要先 `#undef` 然后再 `#define` 这个设置.
-
-样板代码和设置看起来像这样：
-
-```
-#pragma once
-
-// 像下面那样覆盖设置（MY_SETTING指的是你要覆盖的设置项）!
-#undef MY_SETTING
-#define MY_SETTING 4
-```
+# 介绍
+
+本页解释了使用QMK项目所需的基本信息。它假定您能熟练使用Unix shell，但您不熟悉C语言也不熟悉使用make编译。
+
+## 基本QMK结构
+
+QMK是[Jun Wako](https://github.com/tmk)的[tmk_keyboard](https://github.com/tmk/tmk_keyboard)工程的一个分叉。经过更改的TMK原始代码放在`tmk` 文件夹中。 QMK增加的新东西可以在 `quantum` 文件夹中找到。 键盘项目可以在 `handwired`（手动飞线） 和 `keyboard`（PCB键盘）这两个文件夹找到。
+
+### 用户空间结构
+
+在`users`文件夹里面的目录是每个用户的目录。这个文件夹里面放的是用户们在不同键盘都能用到的代码。详见[用户空间特性](feature_userspace.md) 
+
+### 键盘项目结构
+
+在`keyboards`文件夹和他的子文件夹`handwired`中就是各个键盘的项目了，比如`qmk_firmware/keyboards/clueboard`。内部结构与如下:
+
+* `keymaps/`: 可以构建的不同布局
+* `rules.mk`: 用来设置 "make" 命令默认选项的文件。别直接编辑这个文件,你应该使用具体某个布局的 `rules.mk`.
+* `config.h`: 用于设置默认编译选项的文件。别直接编辑这个文件, 你应该使用具体某个布局的 `config.h`.
+
+### 布局结构
+
+在各个布局的文件夹，你能找到以下文件。只有 `keymap.c` 是必要的, 如果其他文件找不到就会直接选择默认选项。
+
+* `config.h`: 配置布局的选项
+* `keymap.c`: 布局的全部代码, 必要文件
+* `rules.mk`: 使能的QMK特性
+* `readme.md`:介绍你的布局,告诉别人怎么使用，附上功能说明。请将图片上传到imgur等图床（译者注：imgur可能已被墙，为了方便国人访问，建议使用国内可以直接访问的图床）。
+
+# `config.h` 文件
+
+有三个重要的`config.h` 位置:
+
+* 键盘 (`/keyboards/<keyboard>/config.h`)
+* 用户空间 (`/users/<user>/config.h`)
+* 布局 (`/keyboards/<keyboard>/keymaps/<keymap>/config.h`)
+
+构建系统按照上述顺序自动获取配置文件。如果要覆盖由上一个 `config.h` 所做的设置，您需要首先为要更改的设置包含一些样板代码。
+
+```
+#pragma once
+```
+
+要覆盖上一个 `config.h` 所做的设置，你要先 `#undef` 然后再 `#define` 这个设置.
+
+样板代码和设置看起来像这样：
+
+```
+#pragma once
+
+// 像下面那样覆盖设置（MY_SETTING指的是你要覆盖的设置项）!
+#undef MY_SETTING
+#define MY_SETTING 4
+```

docs/zh-cn/newbs.md

@@ -0,0 +1,23 @@
+# QMK菜鸟教程
+
+QMK是为你机械硬盘设计的的一个强大的开源固件。使用QMK可以很简单的让你的定制键盘变得强大。看完这篇文章，无论你是菜鸟还是大佬，都可以顺利的使用QMK来定制键盘。
+
+你是否为不知道你的键盘能不能运行QMK而苦恼? 如果你的机械键盘是你自己做的，那么这把键盘一般可以运行QMK。我们提供了[一大堆自制键盘](http://qmk.fm/keyboards/), 所以即便你的键盘不能运行QMK你也很容易能找到满足你需求的键盘。
+
+## 概览
+
+这个教程有7个主要部分：
+
+* [新手上路](newbs_getting_started.md)
+* [用命令行构建你的第一个固件](newbs_building_firmware.md)
+* [用在线界面构建你的第一个固件](newbs_building_firmware_configurator.md)
+* [刷新固件](newbs_flashing.md)
+* [测试和调试](newbs_testing_debugging.md)
+* [Git最佳实践](newbs_best_practices.md)
+* [其他学习资源](newbs_learn_more_resources.md)
+
+这份教程旨在帮助没有固件构建经验的人，也是根据该目的做出选择和建议。这些程序有很多替代方法，大部分替代我们都支持。如果你对完成一个任务有疑问，可以[向我们寻求帮助](getting_started_getting_help.md).
+
+## 其他资源
+
+* [Thomas Baart的 QMK基础博客](https://thomasbaart.nl/category/mechanical-keyboards/firmware/qmk/qmk-basics/) – 这是一个用户创建的博客，涵盖了为新手准备的使用QMK的基础知识。

keyboards/boardwalk/keymaps/brendanwr/config.h

@@ -0,0 +1,16 @@
+/*
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once

keyboards/boardwalk/keymaps/brendanwr/keymap.c

@@ -0,0 +1,95 @@
+/*
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+enum layer {
+  _BASE,
+  _FN,
+  _BACKLIT
+};
+
+
+#define FN MO(_FN)
+#define BACKLIT MO(_BACKLIT)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  /* BASE
+ * .-----------------------------------------------------------------------------------------------------------------------------.
+ * | ESC    | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      | -      | +      | \      |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * | TAB    | Q      | W      | E      | R      | T      | Y      | U      | I      | O      | P      | [      | ]      | BACKSP |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+ * | LCTRL  | A      | S      | D      | F      | G      | H      | J      | K      | L      | ;      | '      | ENTER  | HOME   |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+ * | LSHIFT | Z      | X      | C      | V      | B      | N      | M      | ,      | .      | /      | RSHIFT | FN     | END    |
+ * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------|
+ * |        | LALT  | LGUI       |                             SPACE                            | RGUI        | RALT    |        |
+ * '-----------------------------------------------------------------------------------------------------------------------------'
+ */
+
+ [_BASE] = LAYOUT_ortho_7u(
+  KC_ESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,   KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,  KC_EQL,   KC_BSLS,
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,   KC_Y,   KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,  KC_RBRC,  KC_BSPC,
+  KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,   KC_H,   KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,  KC_ENT,   KC_HOME,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,   KC_N,   KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,  FN,       KC_END,
+           KC_LALT, KC_LGUI,                                KC_SPC,                                 KC_RGUI, KC_RALT          
+ ),
+
+/* FUNCTION
+ * .-----------------------------------------------------------------------------------------------------------------------------.
+ * |        | F1     | F2     | F3     | F4     | F5     | F6     | F7     | F8     | F9     | F10    | F11    | F12    | `      |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * |        |        |        |        |        |        |        |        |        |        | UP     |        |        | DEL    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+ * |        | VOLD   | VOLU   | MUTE   |        |        |        |        |        |        | LEFT   | RIGHT  |        | PG_UP  |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+ * |        |        |        |        |        |        |        |        |        |        | DOWN   |        |        | PG_DN  |
+ * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------|
+ * |        |       |            |                                                              |             |         |        |
+ * '-----------------------------------------------------------------------------------------------------------------------------'
+ */
+
+ [_FN] = LAYOUT_ortho_7u(
+  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10,   KC_F11,  KC_F12,  KC_GRV,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP,   _______, _______, KC_DEL,
+  _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_RGHT, _______, KC_PGUP,
+  BACKLIT, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______, _______, KC_PGDN,
+          _______,  _______,                                  _______,                               _______, _______       
+ ),
+
+/* BACKLIT 
+ * .-----------------------------------------------------------------------------------------------------------------------------.
+ * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * |        | RGBTOG | RGBMOD | RGBHUI | RGBHUD | RGBSAI | RGBSAD | RGBVAI | RGBVAD |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+ * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+ * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------|
+ * |        |       |            |                                                              |             |         |        |
+ * '-----------------------------------------------------------------------------------------------------------------------------'
+ */
+
+ [_BACKLIT] = LAYOUT_ortho_7u(
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+          _______,  _______,                                  _______,                               _______, _______       
+ )
+};

keyboards/boston_meetup/2019/2019.c

@@ -19,20 +19,18 @@
 #include "haptic.h"
 
 #ifdef RGB_MATRIX_ENABLE
-#include "rgblight.h"
+#include "rgb_matrix.h"
 
-rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
-  /*{row | col << 4}
-    |             {x=0..224, y=0..64}
-    |              |         modifier
-    |              |         | */
-  {{1|(3<<4)},    {188, 16}, 4},
-  {{3|(3<<4)},    {187, 48}, 4},
-  {{4|(2<<4)},    {149, 64}, 4},
-  {{4|(1<<4)},    {112, 64}, 4},
-  {{3|(0<<4)},    {37,  48}, 4},
-  {{1|(0<<4)},    {38, 16}, 4}
-};
+led_config_t g_led_config = { {
+  {   5, NO_LED, NO_LED,   0 },
+  { NO_LED, NO_LED, NO_LED, NO_LED },
+  {   4, NO_LED, NO_LED,   1 },
+  {   3, NO_LED, NO_LED,   2 }
+}, {
+    { 188,  16 }, { 187,  48 }, { 149,  64 }, { 112,  64 }, {  37,  48 }, {  38,  16 }
+}, {
+    4, 4, 4, 4, 4, 4
+} };
 #endif
 
 uint8_t *o_fb;
@@ -48,12 +46,12 @@ uint16_t counterst = 0;
 #define ScreenOffInterval 60000 /* milliseconds */
 static uint16_t last_flush;
 
-volatile uint8_t led_numlock = false; 
-volatile uint8_t  led_capslock = false; 
+volatile uint8_t led_numlock = false;
+volatile uint8_t  led_capslock = false;
 volatile uint8_t  led_scrolllock = false;
 
 static uint8_t layer;
-static bool queue_for_send = false; 
+static bool queue_for_send = false;
 static uint8_t encoder_value = 32;
 
 __attribute__ ((weak))
@@ -64,13 +62,13 @@ void draw_ui(void) {
 
 /* Boston MK title is 55 x 10 pixels */
 #define NAME_X 0
-#define NAME_Y 0 
+#define NAME_Y 0
 
   draw_string(NAME_X + 1, NAME_Y + 2, "BOSTON MK", PIXEL_ON, NORM, 0);
 
 /* Layer indicator is 41 x 10 pixels */
 #define LAYER_INDICATOR_X 60
-#define LAYER_INDICATOR_Y 0 
+#define LAYER_INDICATOR_Y 0
 
   draw_string(LAYER_INDICATOR_X + 1, LAYER_INDICATOR_Y + 2, "LAYER", PIXEL_ON, NORM, 0);
   draw_rect_filled_soft(LAYER_INDICATOR_X + 32, LAYER_INDICATOR_Y + 1, 9, 9, PIXEL_ON, NORM);
@@ -88,7 +86,7 @@ void draw_ui(void) {
       draw_pixel(MATRIX_DISPLAY_X + y + y + 3, MATRIX_DISPLAY_Y + x + x + 3,(matrix_get_row(x) & (1 << y)) > 0, NORM);
 
     }
-  } 
+  }
   draw_rect_soft(MATRIX_DISPLAY_X, MATRIX_DISPLAY_Y, 12, 12, PIXEL_ON, NORM);
   /* hadron oled location on thumbnail */
   draw_rect_filled_soft(MATRIX_DISPLAY_X + 5, MATRIX_DISPLAY_Y + 2, 6, 2, PIXEL_ON, NORM);
@@ -195,7 +193,7 @@ void matrix_init_kb(void) {
   queue_for_send = true;
 	matrix_init_user();
 }
-            
+
 void matrix_scan_kb(void) {
 if (queue_for_send) {
 #ifdef QWIIC_MICRO_OLED_ENABLE

keyboards/cannonkeys/practice65/boards/GENERIC_STM32_F103/board.c

@@ -0,0 +1,56 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+
+// Value to place in RTC backup register 10 for persistent bootloader mode
+#define RTC_BOOTLOADER_FLAG 0x424C
+
+/**
+ * @brief   PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ *          This variable is used by the HAL when initializing the PAL driver.
+ */
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+const PALConfig pal_default_config =
+{
+  {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
+  {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
+  {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
+  {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
+  {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
+};
+#endif
+
+/*
+ * Early initialization code.
+ * This initialization must be performed just after stack setup and before
+ * any other initialization.
+ */
+void __early_init(void) {
+
+  stm32_clock_init();
+}
+
+/*
+ * Board-specific initialization code.
+ */
+void boardInit(void) {
+   //JTAG-DP Disabled and SW-DP Enabled
+   AFIO->MAPR |= AFIO_MAPR_SWJ_CFG_JTAGDISABLE;
+   //Set backup register DR10 to enter bootloader on reset
+   BKP->DR10 = RTC_BOOTLOADER_FLAG;
+}

keyboards/cannonkeys/practice65/boards/GENERIC_STM32_F103/board.h

@@ -0,0 +1,166 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * Setup for a Generic STM32F103 board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_GENERIC_STM32_F103
+#define BOARD_NAME              "Generic STM32F103x board"
+
+/*
+ * Board frequencies.
+ */
+#define STM32_LSECLK            32768
+#define STM32_HSECLK            8000000
+
+/*
+ * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
+ */
+#define STM32F103xB
+
+/*
+ * IO pins assignments
+ */
+
+/* on-board */
+
+#define GPIOA_LED               8
+#define GPIOD_OSC_IN            0
+#define GPIOD_OSC_OUT           1
+
+/* In case your board has a "USB enable" hardware
+   controlled by a pin, define it here. (It could be just
+   a 1.5k resistor connected to D+ line.)
+*/
+/*
+#define GPIOB_USB_DISC          10
+*/
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ *
+ * The digits have the following meaning:
+ *   0 - Analog input.
+ *   1 - Push Pull output 10MHz.
+ *   2 - Push Pull output 2MHz.
+ *   3 - Push Pull output 50MHz.
+ *   4 - Digital input.
+ *   5 - Open Drain output 10MHz.
+ *   6 - Open Drain output 2MHz.
+ *   7 - Open Drain output 50MHz.
+ *   8 - Digital input with PullUp or PullDown resistor depending on ODR.
+ *   9 - Alternate Push Pull output 10MHz.
+ *   A - Alternate Push Pull output 2MHz.
+ *   B - Alternate Push Pull output 50MHz.
+ *   C - Reserved.
+ *   D - Alternate Open Drain output 10MHz.
+ *   E - Alternate Open Drain output 2MHz.
+ *   F - Alternate Open Drain output 50MHz.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+
+/*
+ * Port A setup.
+ * Everything input with pull-up except:
+ * PA2  - Alternate output  (USART2 TX).
+ * PA3  - Normal input      (USART2 RX).
+ * PA9  - Alternate output  (USART1 TX).
+ * PA10 - Normal input      (USART1 RX).
+ */
+#define VAL_GPIOACRL            0x88884B88      /*  PA7...PA0 */
+#define VAL_GPIOACRH            0x888884B8      /* PA15...PA8 */
+#define VAL_GPIOAODR            0xFFFFFFFF
+
+/*
+ * Port B setup.
+ * Everything input with pull-up except:
+ * PB10    - Push Pull output  (USB switch).
+ */
+#define VAL_GPIOBCRL            0x88888888      /*  PB7...PB0 */
+#define VAL_GPIOBCRH            0x88888388      /* PB15...PB8 */
+#define VAL_GPIOBODR            0xFFFFFFFF
+
+/*
+ * Port C setup.
+ * Everything input with pull-up except:
+ * PC13    - Push Pull output  (LED).
+ */
+#define VAL_GPIOCCRL            0x88888888      /*  PC7...PC0 */
+#define VAL_GPIOCCRH            0x88388888      /* PC15...PC8 */
+#define VAL_GPIOCODR            0xFFFFFFFF
+
+/*
+ * Port D setup.
+ * Everything input with pull-up except:
+ * PD0  - Normal input (XTAL).
+ * PD1  - Normal input (XTAL).
+ */
+#define VAL_GPIODCRL            0x88888844      /*  PD7...PD0 */
+#define VAL_GPIODCRH            0x88888888      /* PD15...PD8 */
+#define VAL_GPIODODR            0xFFFFFFFF
+
+/*
+ * Port E setup.
+ * Everything input with pull-up except:
+ */
+#define VAL_GPIOECRL            0x88888888      /*  PE7...PE0 */
+#define VAL_GPIOECRH            0x88888888      /* PE15...PE8 */
+#define VAL_GPIOEODR            0xFFFFFFFF
+
+/*
+ * USB bus activation macro, required by the USB driver.
+ */
+/* The point is that most of the generic STM32F103* boards
+   have a 1.5k resistor connected on one end to the D+ line
+   and on the other end to some pin. Or even a slightly more
+   complicated "USB enable" circuit, controlled by a pin.
+   That should go here.
+
+   However on some boards (e.g. one that I have), there's no
+   such hardware. In which case it's better to not do anything.
+*/
+/*
+#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC)
+*/
+#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT);
+
+/*
+ * USB bus de-activation macro, required by the USB driver.
+ */
+/*
+#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC)
+*/
+#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12);
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+  void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* _BOARD_H_ */

keyboards/cannonkeys/practice65/boards/GENERIC_STM32_F103/board.mk

@@ -0,0 +1,5 @@
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F103/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F103

keyboards/cannonkeys/practice65/bootloader_defs.h

@@ -1,7 +1,10 @@
 /* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here:
+/* It is chip dependent, the correct number can be looked up here (page 175):
  * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
  * This also requires a patch to chibios:
  *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
  */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
+
+// STM32F103* does NOT have an USB bootloader in ROM (only serial),
+//  so setting anything here does not make much sense
+#define STM32_BOOTLOADER_ADDRESS 0x80000000

keyboards/cannonkeys/practice65/chconf.h

@@ -1,5 +1,5 @@
 /*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -58,7 +58,7 @@
  *          The value one is not valid, timeouts are rounded up to
  *          this value.
  */
-#define CH_CFG_ST_TIMEDELTA                 2
+#define CH_CFG_ST_TIMEDELTA                 0
 
 /** @} */
 
@@ -105,6 +105,10 @@
  */
 #define CH_CFG_NO_IDLE_THREAD               FALSE
 
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE              TRUE
+
 /** @} */
 
 /*===========================================================================*/
@@ -140,7 +144,7 @@
  *
  * @note    The default is @p TRUE.
  */
-#define CH_CFG_USE_TM                       TRUE
+#define CH_CFG_USE_TM                       FALSE
 
 /**
  * @brief   Threads registry APIs.
@@ -214,7 +218,7 @@
  * @note    The default is @p TRUE.
  * @note    Requires @p CH_CFG_USE_CONDVARS.
  */
-#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+#define CH_CFG_USE_CONDVARS_TIMEOUT         FALSE
 
 /**
  * @brief   Events Flags APIs.
@@ -252,7 +256,7 @@
  *          requirements.
  * @note    Requires @p CH_CFG_USE_MESSAGES.
  */
-#define CH_CFG_USE_MESSAGES_PRIORITY        TRUE
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
 
 /**
  * @brief   Mailboxes APIs.
@@ -292,7 +296,7 @@
  *
  * @note    The default is @p TRUE.
  */
-#define CH_CFG_USE_MEMPOOLS                 TRUE
+#define CH_CFG_USE_MEMPOOLS                 FALSE
 
 /**
  * @brief   Dynamic Threads APIs.
@@ -303,7 +307,7 @@
  * @note    Requires @p CH_CFG_USE_WAITEXIT.
  * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
  */
-#define CH_CFG_USE_DYNAMIC                  TRUE
+#define CH_CFG_USE_DYNAMIC                  FALSE
 
 /** @} */
 
@@ -374,7 +378,7 @@
  * @note    The default failure mode is to halt the system with the global
  *          @p panic_msg variable set to @p NULL.
  */
-#define CH_DBG_ENABLE_STACK_CHECK           TRUE
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
 
 /**
  * @brief   Debug option, stacks initialization.

keyboards/cannonkeys/practice65/config.h

@@ -1,6 +1,5 @@
 /*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
+Copyright 2015 Jun Wako <wakojun@gmail.com>
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -16,57 +15,49 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef REV2_CONFIG_H
-#define REV2_CONFIG_H
-
-#include "config_common.h"
+#pragma once
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
-#define DEVICE_VER      0x0100
-#define MANUFACTURER    Omkbd
-#define PRODUCT         ErgoDash
-#define DESCRIPTION     Power
+#define VENDOR_ID       0xCA04
+#define PRODUCT_ID      0x6565
+#define DEVICE_VER      0x0001
+/* in python2: list(u"whatever".encode('utf-16-le')) */
+/*   at most 32 characters or the ugly hack in usb_main.c borks */
+#define MANUFACTURER CannonKeys
+#define PRODUCT Practice 65
+#define DESCRIPTION Practice 65
 
 /* key matrix size */
-// Rows are doubled-up
-#define MATRIX_ROWS 10
-#define MATRIX_COLS 7
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
 
-// wiring of each half
-#define MATRIX_ROW_PINS { D4, D7, E6, B4, B5 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
-// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
+#define MATRIX_COL_PINS { B8, B0, A0, B5, B10, B9, A6, B12, A7, A5, A4, A3, A2, A1, B13, B14 }
+#define MATRIX_ROW_PINS { B4, B11, B1, B7, B6 }
+#define DIODE_DIRECTION COL2ROW
 
-/* define tapping term */
-#define TAPPING_TERM 120
+#define BACKLIGHT_LEVELS 6
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 6
 
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
 
-#define C6_AUDIO
-
-/* number of backlight levels */
-#ifdef BACKLIGHT_ENABLE
-  #define BACKLIGHT_PIN B6
-  #define BACKLIGHT_LEVELS 7
-//  #define BACKLIGHT_BREATHING
-//  #define BREATHING_PERIOD 4
-#endif
-
 /* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
+#define DEBOUNCE    5
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* ws2812 RGB LED */
-#define RGB_DI_PIN D3
+#define RGBLIGHT_ANIMATIONS
+
+#define WS2812_LED_N 20
+#define RGBLED_NUM WS2812_LED_N
+#define PORT_WS2812     GPIOB
+#define PIN_WS2812      15
+#define WS2812_SPI SPID2
 
-#define RGBLED_NUM 24    // Number of LEDs
 
 /*
  * Feature disable options
@@ -74,10 +65,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 /* disable debug print */
-// #define NO_DEBUG
+//#define NO_DEBUG
 
 /* disable print */
-// #define NO_PRINT
+//#define NO_PRINT
 
 /* disable action features */
 //#define NO_ACTION_LAYER
@@ -85,5 +76,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
-
-#endif

keyboards/cannonkeys/practice65/halconf.h

@@ -1,5 +1,5 @@
 /*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -25,8 +25,8 @@
  * @{
  */
 
-#ifndef HALCONF_H
-#define HALCONF_H
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
 
 #include "mcuconf.h"
 
@@ -55,7 +55,7 @@
  * @brief   Enables the DAC subsystem.
  */
 #if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC                 TRUE
+#define HAL_USE_DAC                 FALSE
 #endif
 
 /**
@@ -69,14 +69,14 @@
  * @brief   Enables the GPT subsystem.
  */
 #if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT                 TRUE
+#define HAL_USE_GPT                 FALSE
 #endif
 
 /**
  * @brief   Enables the I2C subsystem.
  */
 #if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C                 TRUE
+#define HAL_USE_I2C                 FALSE
 #endif
 
 /**
@@ -111,14 +111,7 @@
  * @brief   Enables the PWM subsystem.
  */
 #if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM                 FALSE
-#endif
-
-/**
- * @brief   Enables the QSPI subsystem.
- */
-#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)
-#define HAL_USE_QSPI                FALSE
+#define HAL_USE_PWM                 TRUE
 #endif
 
 /**
@@ -153,7 +146,7 @@
  * @brief   Enables the SPI subsystem.
  */
 #if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI                 FALSE
+#define HAL_USE_SPI                 TRUE
 #endif
 
 /**
@@ -301,7 +294,7 @@
  * @brief   Serial buffers size.
  * @details Configuration parameter, you can change the depth of the queue
  *          buffers depending on the requirements of your application.
- * @note    The default is 16 bytes for both the transmission and receive
+ * @note    The default is 64 bytes for both the transmission and receive
  *          buffers.
  */
 #if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
@@ -316,21 +309,13 @@
  * @brief   Serial over USB buffers size.
  * @details Configuration parameter, the buffer size must be a multiple of
  *          the USB data endpoint maximum packet size.
- * @note    The default is 256 bytes for both the transmission and receive
+ * @note    The default is 64 bytes for both the transmission and receive
  *          buffers.
  */
 #if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
 #define SERIAL_USB_BUFFERS_SIZE     1
 #endif
 
-/**
- * @brief   Serial over USB number of buffers.
- * @note    The default is 2 buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_NUMBER   2
-#endif
-
 /*===========================================================================*/
 /* SPI driver related settings.                                              */
 /*===========================================================================*/
@@ -351,26 +336,6 @@
 #define SPI_USE_MUTUAL_EXCLUSION    TRUE
 #endif
 
-/*===========================================================================*/
-/* UART driver related settings.                                             */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
-#define UART_USE_WAIT               FALSE
-#endif
-
-/**
- * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define UART_USE_MUTUAL_EXCLUSION   FALSE
-#endif
-
 /*===========================================================================*/
 /* USB driver related settings.                                              */
 /*===========================================================================*/
@@ -383,6 +348,6 @@
 #define USB_USE_WAIT                TRUE
 #endif
 
-#endif /* HALCONF_H */
+#endif /* _HALCONF_H_ */
 
 /** @} */

keyboards/cannonkeys/practice65/keymaps/default/keymap.c

@@ -0,0 +1,48 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BASE 0
+#define _FN1 1
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT_default(
+    KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,   KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSPC, KC_DEL, KC_INS,\
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,   KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,  KC_BSLS, KC_DEL,\
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,   KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,  KC_ENT,         KC_PGUP,  \
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,   KC_M,    KC_COMM, KC_DOT,  KC_SLSH,           KC_RSFT, KC_UP, KC_PGDN, \
+    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                   KC_RALT, MO(_FN1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT \
+  ),
+
+  [_FN1] = LAYOUT_default(
+    KC_GESC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL, _______, _______,\
+    RGB_TOG, RGB_MOD, KC_UP,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\
+    BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, \
+    BL_INC,  BL_DEC,  BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, \
+    KC_GRV,  _______, _______,                            _______,                            _______, _______, _______, _______, _______, RESET \
+  )
+};

keyboards/cannonkeys/practice65/ld/MKL26Z64.ld

@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com
+ *           (C) 2016 flabbergast <s3+flabbergast@sdfeu.org>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/*
+ * KL26Z64 memory setup.
+ */
+MEMORY
+{
+  flash0   : org = 0x00000000, len = 0x100
+  flash1   : org = 0x00000400, len = 0x10
+  flash2   : org = 0x00000410, len = 62k - 0x410
+  flash3   : org = 0x0000F800, len = 2k
+  flash4   : org = 0x00000000, len = 0
+  flash5   : org = 0x00000000, len = 0
+  flash6   : org = 0x00000000, len = 0
+  flash7   : org = 0x00000000, len = 0
+  ram0     : org = 0x1FFFF800, len = 8k
+  ram1     : org = 0x00000000, len = 0
+  ram2     : org = 0x00000000, len = 0
+  ram3     : org = 0x00000000, len = 0
+  ram4     : org = 0x00000000, len = 0
+  ram5     : org = 0x00000000, len = 0
+  ram6     : org = 0x00000000, len = 0
+  ram7     : org = 0x00000000, len = 0
+}
+
+/* Flash region for the configuration bytes.*/
+SECTIONS
+{
+  .cfmprotect : ALIGN(4) SUBALIGN(4)
+  {
+    KEEP(*(.cfmconfig))
+  } > flash1
+}
+
+/* For each data/text section two region are defined, a virtual region
+   and a load region (_LMA suffix).*/
+
+/* Flash region to be used for exception vectors.*/
+REGION_ALIAS("VECTORS_FLASH", flash0);
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for constructors and destructors.*/
+REGION_ALIAS("XTORS_FLASH", flash2);
+REGION_ALIAS("XTORS_FLASH_LMA", flash2);
+
+/* Flash region to be used for code text.*/
+REGION_ALIAS("TEXT_FLASH", flash2);
+REGION_ALIAS("TEXT_FLASH_LMA", flash2);
+
+/* Flash region to be used for read only data.*/
+REGION_ALIAS("RODATA_FLASH", flash2);
+REGION_ALIAS("RODATA_FLASH_LMA", flash2);
+
+/* Flash region to be used for various.*/
+REGION_ALIAS("VARIOUS_FLASH", flash2);
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash2);
+
+/* Flash region to be used for RAM(n) initialization data.*/
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2);
+
+/* RAM region to be used for Main stack. This stack accommodates the processing
+   of all exceptions and interrupts.*/
+REGION_ALIAS("MAIN_STACK_RAM", ram0);
+
+/* RAM region to be used for the process stack. This is the stack used by
+   the main() function.*/
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);
+
+/* RAM region to be used for data segment.*/
+REGION_ALIAS("DATA_RAM", ram0);
+REGION_ALIAS("DATA_RAM_LMA", flash2);
+
+/* RAM region to be used for BSS segment.*/
+REGION_ALIAS("BSS_RAM", ram0);
+
+/* RAM region to be used for the default heap.*/
+REGION_ALIAS("HEAP_RAM", ram0);
+
+__eeprom_workarea_start__ = ORIGIN(flash3);
+__eeprom_workarea_size__  = LENGTH(flash3);
+__eeprom_workarea_end__   = __eeprom_workarea_start__ + __eeprom_workarea_size__;
+
+/* Generic rules inclusion.*/
+INCLUDE rules.ld

keyboards/cannonkeys/practice65/ld/STM32F103x8_stm32duino_bootloader.ld

@@ -0,0 +1,88 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * ST32F103xB memory setup for use with the maplemini bootloader.
+ * You will have to
+ * 	#define CORTEX_VTOR_INIT 0x5000
+ * in your projects chconf.h
+ */
+MEMORY
+{
+    flash0  : org = 0x08002000, len = 64k - 0x2000
+    flash1  : org = 0x00000000, len = 0
+    flash2  : org = 0x00000000, len = 0
+    flash3  : org = 0x00000000, len = 0
+    flash4  : org = 0x00000000, len = 0
+    flash5  : org = 0x00000000, len = 0
+    flash6  : org = 0x00000000, len = 0
+    flash7  : org = 0x00000000, len = 0
+    ram0    : org = 0x20000000, len = 20k
+    ram1    : org = 0x00000000, len = 0
+    ram2    : org = 0x00000000, len = 0
+    ram3    : org = 0x00000000, len = 0
+    ram4    : org = 0x00000000, len = 0
+    ram5    : org = 0x00000000, len = 0
+    ram6    : org = 0x00000000, len = 0
+    ram7    : org = 0x00000000, len = 0
+}
+
+/* For each data/text section two region are defined, a virtual region
+   and a load region (_LMA suffix).*/
+
+/* Flash region to be used for exception vectors.*/
+REGION_ALIAS("VECTORS_FLASH", flash0);
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for constructors and destructors.*/
+REGION_ALIAS("XTORS_FLASH", flash0);
+REGION_ALIAS("XTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for code text.*/
+REGION_ALIAS("TEXT_FLASH", flash0);
+REGION_ALIAS("TEXT_FLASH_LMA", flash0);
+
+/* Flash region to be used for read only data.*/
+REGION_ALIAS("RODATA_FLASH", flash0);
+REGION_ALIAS("RODATA_FLASH_LMA", flash0);
+
+/* Flash region to be used for various.*/
+REGION_ALIAS("VARIOUS_FLASH", flash0);
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
+
+/* Flash region to be used for RAM(n) initialization data.*/
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
+
+/* RAM region to be used for Main stack. This stack accommodates the processing
+   of all exceptions and interrupts.*/
+REGION_ALIAS("MAIN_STACK_RAM", ram0);
+
+/* RAM region to be used for the process stack. This is the stack used by
+   the main() function.*/
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);
+
+/* RAM region to be used for data segment.*/
+REGION_ALIAS("DATA_RAM", ram0);
+REGION_ALIAS("DATA_RAM_LMA", flash0);
+
+/* RAM region to be used for BSS segment.*/
+REGION_ALIAS("BSS_RAM", ram0);
+
+/* RAM region to be used for the default heap.*/
+REGION_ALIAS("HEAP_RAM", ram0);
+
+/* Generic rules inclusion.*/
+INCLUDE rules.ld

keyboards/cannonkeys/practice65/mcuconf.h

@@ -1,5 +1,5 @@
 /*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -14,11 +14,13 @@
     limitations under the License.
 */
 
-#ifndef MCUCONF_H
-#define MCUCONF_H
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define STM32F103_MCUCONF
 
 /*
- * STM32F3xx drivers configuration.
+ * STM32F103 drivers configuration.
  * The following settings override the default settings present in
  * the various device driver implementation headers.
  * Note that the settings for each driver only have effect if the whole
@@ -31,71 +33,35 @@
  * 0...3        Lowest...Highest.
  */
 
-#define STM32F3xx_MCUCONF
-
 /*
  * HAL driver system settings.
  */
 #define STM32_NO_INIT                       FALSE
-#define STM32_PVD_ENABLE                    FALSE
-#define STM32_PLS                           STM32_PLS_LEV0
 #define STM32_HSI_ENABLED                   TRUE
-#define STM32_LSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   FALSE
 #define STM32_HSE_ENABLED                   TRUE
 #define STM32_LSE_ENABLED                   FALSE
 #define STM32_SW                            STM32_SW_PLL
 #define STM32_PLLSRC                        STM32_PLLSRC_HSE
-#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLXTPRE                      STM32_PLLXTPRE_DIV1
 #define STM32_PLLMUL_VALUE                  9
 #define STM32_HPRE                          STM32_HPRE_DIV1
 #define STM32_PPRE1                         STM32_PPRE1_DIV2
 #define STM32_PPRE2                         STM32_PPRE2_DIV2
-#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
-#define STM32_ADC12PRES                     STM32_ADC12PRES_DIV1
-#define STM32_ADC34PRES                     STM32_ADC34PRES_DIV1
-#define STM32_USART1SW                      STM32_USART1SW_PCLK
-#define STM32_USART2SW                      STM32_USART2SW_PCLK
-#define STM32_USART3SW                      STM32_USART3SW_PCLK
-#define STM32_UART4SW                       STM32_UART4SW_PCLK
-#define STM32_UART5SW                       STM32_UART5SW_PCLK
-#define STM32_I2C1SW                        STM32_I2C1SW_SYSCLK
-#define STM32_I2C2SW                        STM32_I2C2SW_SYSCLK
-#define STM32_TIM1SW                        STM32_TIM1SW_PCLK2
-#define STM32_TIM8SW                        STM32_TIM8SW_PCLK2
-#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
 #define STM32_USB_CLOCK_REQUIRED            TRUE
 #define STM32_USBPRE                        STM32_USBPRE_DIV1P5
-
-#undef STM32_HSE_BYPASS
-// #error "oh no"
-// #endif
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_RTCSEL                        STM32_RTCSEL_HSEDIV
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
 
 /*
  * ADC driver system settings.
  */
-#define STM32_ADC_DUAL_MODE                 FALSE
-#define STM32_ADC_COMPACT_SAMPLES           FALSE
 #define STM32_ADC_USE_ADC1                  FALSE
-#define STM32_ADC_USE_ADC2                  FALSE
-#define STM32_ADC_USE_ADC3                  FALSE
-#define STM32_ADC_USE_ADC4                  FALSE
-#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
-#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(2, 1)
-#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(2, 5)
-#define STM32_ADC_ADC4_DMA_STREAM           STM32_DMA_STREAM_ID(2, 2)
 #define STM32_ADC_ADC1_DMA_PRIORITY         2
-#define STM32_ADC_ADC2_DMA_PRIORITY         2
-#define STM32_ADC_ADC3_DMA_PRIORITY         2
-#define STM32_ADC_ADC4_DMA_PRIORITY         2
-#define STM32_ADC_ADC12_IRQ_PRIORITY        5
-#define STM32_ADC_ADC3_IRQ_PRIORITY         5
-#define STM32_ADC_ADC4_IRQ_PRIORITY         5
-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     5
-#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     5
-#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     5
-#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY     5
-#define STM32_ADC_ADC12_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
-#define STM32_ADC_ADC34_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
+#define STM32_ADC_ADC1_IRQ_PRIORITY         6
 
 /*
  * CAN driver system settings.
@@ -103,17 +69,6 @@
 #define STM32_CAN_USE_CAN1                  FALSE
 #define STM32_CAN_CAN1_IRQ_PRIORITY         11
 
-/*
- * DAC driver system settings.
- */
-#define STM32_DAC_DUAL_MODE                 FALSE
-#define STM32_DAC_USE_DAC1_CH1              TRUE
-#define STM32_DAC_USE_DAC1_CH2              TRUE
-#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
-#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
-#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
-#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
-
 /*
  * EXT driver system settings.
  */
@@ -128,10 +83,6 @@
 #define STM32_EXT_EXTI17_IRQ_PRIORITY       6
 #define STM32_EXT_EXTI18_IRQ_PRIORITY       6
 #define STM32_EXT_EXTI19_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI30_32_IRQ_PRIORITY    6
-#define STM32_EXT_EXTI33_IRQ_PRIORITY       6
 
 /*
  * GPT driver system settings.
@@ -140,28 +91,25 @@
 #define STM32_GPT_USE_TIM2                  FALSE
 #define STM32_GPT_USE_TIM3                  FALSE
 #define STM32_GPT_USE_TIM4                  FALSE
-#define STM32_GPT_USE_TIM6                  TRUE
-#define STM32_GPT_USE_TIM7                  TRUE
-#define STM32_GPT_USE_TIM8                  TRUE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
 #define STM32_GPT_TIM1_IRQ_PRIORITY         7
 #define STM32_GPT_TIM2_IRQ_PRIORITY         7
 #define STM32_GPT_TIM3_IRQ_PRIORITY         7
 #define STM32_GPT_TIM4_IRQ_PRIORITY         7
-#define STM32_GPT_TIM6_IRQ_PRIORITY         7
-#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
 #define STM32_GPT_TIM8_IRQ_PRIORITY         7
 
 /*
  * I2C driver system settings.
  */
-#define STM32_I2C_USE_I2C1                  TRUE
+#define STM32_I2C_USE_I2C1                  FALSE
 #define STM32_I2C_USE_I2C2                  FALSE
 #define STM32_I2C_BUSY_TIMEOUT              50
-#define STM32_I2C_I2C1_IRQ_PRIORITY         10
-#define STM32_I2C_I2C2_IRQ_PRIORITY         10
-#define STM32_I2C_USE_DMA                   TRUE
-#define STM32_I2C_I2C1_DMA_PRIORITY         1
-#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
 #define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
 
 /*
@@ -171,28 +119,37 @@
 #define STM32_ICU_USE_TIM2                  FALSE
 #define STM32_ICU_USE_TIM3                  FALSE
 #define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
 #define STM32_ICU_USE_TIM8                  FALSE
 #define STM32_ICU_TIM1_IRQ_PRIORITY         7
 #define STM32_ICU_TIM2_IRQ_PRIORITY         7
 #define STM32_ICU_TIM3_IRQ_PRIORITY         7
 #define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
 #define STM32_ICU_TIM8_IRQ_PRIORITY         7
 
 /*
  * PWM driver system settings.
  */
 #define STM32_PWM_USE_ADVANCED              FALSE
-#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM1                  TRUE
 #define STM32_PWM_USE_TIM2                  FALSE
 #define STM32_PWM_USE_TIM3                  FALSE
 #define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
 #define STM32_PWM_USE_TIM8                  FALSE
 #define STM32_PWM_TIM1_IRQ_PRIORITY         7
 #define STM32_PWM_TIM2_IRQ_PRIORITY         7
 #define STM32_PWM_TIM3_IRQ_PRIORITY         7
 #define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
 #define STM32_PWM_TIM8_IRQ_PRIORITY         7
 
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_IRQ_PRIORITY              15
+
 /*
  * SERIAL driver system settings.
  */
@@ -211,7 +168,7 @@
  * SPI driver system settings.
  */
 #define STM32_SPI_USE_SPI1                  FALSE
-#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI2                  TRUE
 #define STM32_SPI_USE_SPI3                  FALSE
 #define STM32_SPI_SPI1_DMA_PRIORITY         1
 #define STM32_SPI_SPI2_DMA_PRIORITY         1
@@ -249,9 +206,4 @@
 #define STM32_USB_USB1_HP_IRQ_PRIORITY      13
 #define STM32_USB_USB1_LP_IRQ_PRIORITY      14
 
-/*
- * WDG driver system settings.
- */
-#define STM32_WDG_USE_IWDG                  FALSE
-
-#endif /* MCUCONF_H */
+#endif /* _MCUCONF_H_ */

keyboards/cannonkeys/practice65/practice65.c

@@ -0,0 +1,2 @@
+
+#include "practice65.h"

keyboards/cannonkeys/practice65/practice65.h

@@ -0,0 +1,19 @@
+#pragma once
+
+#include "quantum.h"
+
+#define KNO KC_NO
+
+#define LAYOUT_default( \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, \
+  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      K1F, \
+  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D,      K2F, \
+  K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,      K3F, \
+  K40, K41,  K42,               K46,           K49, K4A, K4B, K4C, K4D,      K4F \
+) { \
+  {  K00,  K01,  K02,  K03,  K04,    K05,    K06,    K07,    K08,    K09,  K0A,  K0B,  K0C,    K0D,   K0E,    K0F }, \
+  {  K10,  K11,  K12,  K13,  K14,    K15,    K16,    K17,    K18,    K19,  K1A,  K1B,  K1C,    K1D,   KC_NO ,  K1F }, \
+  {  K20,  K21,  K22,  K23,  K24,    K25,    K26,    K27,    K28,    K29,  K2A,  K2B,  KC_NO,  K2D,   KC_NO,  K2F  }, \
+  {  K30,  KNO,  K32,  K33,  K34,    K35,    K36,    K37,    K38,    K39,  K3A,  K3B,  K3C,    K3D,   KC_NO,  K3F  }, \
+  {  K40,  K41,  K42,  KNO,  KC_NO,  KC_NO,  K46,    KC_NO,  KC_NO,  K49,  K4A,  K4B,  K4C,    K4D,   KC_NO,  K4F  }  \
+}

keyboards/cannonkeys/practice65/readme.md

@@ -0,0 +1,12 @@
+# Practice 65
+
+A Blue Pill STM32F103C8T6-based 65% ANSI board.
+
+Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan1)  
+Hardware Supported: Blue Pill STM32F103C8T6  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make cannonkeys/practice65:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/cannonkeys/practice65/rules.mk

@@ -0,0 +1,53 @@
+# project specific files
+VPATH += keyboards/cannonkeys/bluepill
+SRC =	led.c \
+      keyboard.c
+
+# GENERIC STM32F103C8T6 board - stm32duino bootloader
+OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
+MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
+BOARD = GENERIC_STM32_F103
+
+# OPT_DEFS =
+# MCU_LDSCRIPT = STM32F103x8
+# BOARD = GENERIC_STM32_F103
+
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F1xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f1xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m3
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 7
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+
+
+#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	    # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes
+RGBLIGHT_ENABLE = yes

keyboards/crkbd/keymaps/drashna/config.h

@@ -27,7 +27,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define MASTER_RIGHT
 #define EE_HANDS
 
-// #define SSD1306OLED
+#undef USE_I2C
+#undef SSD1306OLED
 
 #define USE_SERIAL_PD2
 
@@ -35,17 +36,42 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define TAPPING_TERM 100
 
 #ifdef RGBLIGHT_ENABLE
-#undef RGBLED_NUM
-#define RGBLED_NUM 27
+#   undef RGBLED_NUM
+#   define RGBLED_NUM 27
 
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_LIMIT_VAL 100
+#   define RGBLIGHT_HUE_STEP 8
+#   define RGBLIGHT_SAT_STEP 8
+#   define RGBLIGHT_VAL_STEP 8
+#   define RGBLIGHT_LIMIT_VAL 100
 #endif
 
+#ifdef RGB_MATRIX_ENABLE
+#   define RGB_MATRIX_KEYPRESSES // reacts to keypresses
+#   define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+
+#   define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#   define DISABLE_RGB_MATRIX_CYCLE_ALL
+#   define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#   define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#   define DISABLE_RGB_MATRIX_DUAL_BEACON
+#   define DISABLE_RGB_MATRIX_RAINBOW_BEACON
+#   define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+// #define DISABLE_RGB_MATRIX_RAINDROPS
+// #define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+#   define DISABLE_RGB_MATRIX_DIGITAL_RAIN
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+#   define DISABLE_RGB_MATRIX_SOLID_SPLASH
+#   define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
+
 #ifdef AUDIO_ENABLE
-#define B6_AUDIO
+#   define B6_AUDIO
 // #define NO_MUSIC_MODE
 #endif
 

keyboards/crkbd/keymaps/drashna/keymap.c

@@ -1,15 +1,5 @@
 #include QMK_KEYBOARD_H
 #include "drashna.h"
-#ifdef PROTOCOL_LUFA
-  #include "lufa.h"
-  #include "split_util.h"
-#endif
-#ifdef SSD1306OLED
-  #include "ssd1306.h"
-#endif
-#ifdef OLED_DRIVER_ENABLE
-  #include "oled_driver.h"
-#endif
 
 extern keymap_config_t keymap_config;
 extern uint8_t is_master;
@@ -20,7 +10,7 @@ extern rgblight_config_t rgblight_config;
 #endif
 
 enum crkbd_keycodes {
-  RGBRST = NEW_SAFE_RANGE
+    RGBRST = NEW_SAFE_RANGE
 };
 
 #define LAYOUT_crkbd_base( \
@@ -31,7 +21,7 @@ enum crkbd_keycodes {
   LAYOUT_wrapper( \
     KC_ESC,  K01,    K02,     K03,      K04,     K05,                        K06,     K07,     K08,     K09,     K0A,     KC_MINS, \
     KC_TAB, ALT_T(K11),  K12, K13,      K14,     K15,                        K16,     K17,     K18,     K19,     K1A, RGUI_T(KC_QUOT), \
-    OS_LSFT, CTL_T(K21), K22, K23,      K24,     K25,                        K26,     K27,     K28,     K29,  CTL_T(K2A), OS_RSFT, \
+    OS_LSFT, CTL_T(K21), K22, K23,      K24,     K25,                        K26,     K27,     K28,     K29, RCTL_T(K2A), OS_RSFT, \
                            LT(_LOWER,KC_GRV), KC_SPC,  KC_BSPC,     KC_DEL,  KC_ENT,  RAISE                                        \
   )
 #define LAYOUT_crkbd_base_wrapper(...)       LAYOUT_crkbd_base(__VA_ARGS__)
@@ -115,35 +105,38 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 };
 
 void matrix_init_keymap(void) {
-  //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
-  #ifdef SSD1306OLED
-    iota_gfx_init(!has_usb());   // turns on the display
-  #endif
-
-  #ifndef CONVERT_TO_PROTON_C
+#ifndef CONVERT_TO_PROTON_C
     setPinOutput(D5);
     writePinHigh(D5);
 
     setPinOutput(B0);
     writePinHigh(B0);
-  #endif
+#endif
 }
 
-//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
-#ifdef SSD1306OLED
 
-// When add source files to SRC in rules.mk, you can use functions.
-const char *read_logo(void);
-char layer_state_str[24];
-char modifier_state_str[24];
-char host_led_state_str[24];
-char keylog_str[24] = {};
-char keylogs_str[21] = {};
-int keylogs_str_idx = 0;
+#ifdef OLED_DRIVER_ENABLE
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+    if (is_master) {
+        return OLED_ROTATION_270;
+    } else {
+        return rotation;
+    }
+}
 
-// const char *read_mode_icon(bool swap);
-// void set_timelog(void);
-// const char *read_timelog(void);
+void render_crkbd_logo(void) {
+    static const char PROGMEM crkbd_logo[] = {
+        0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94,
+        0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4,
+        0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4,
+        0};
+    oled_write_P(crkbd_logo, false);
+}
+
+#define KEYLOG_LEN (int)(32 / OLED_FONT_WIDTH)
+char keylog_str[KEYLOG_LEN] = {};
+uint8_t keylogs_str_idx = 0;
+uint16_t log_timer = 0;
 
 const char code_to_name[60] = {
     ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
@@ -153,261 +146,124 @@ const char code_to_name[60] = {
     'R', 'E', 'B', 'T', '_', '-', '=', '[', ']', '\\',
     '#', ';', '\'', '`', ',', '.', '/', ' ', ' ', ' '};
 
-void set_keylog(uint16_t keycode, keyrecord_t *record) {
-  char name = ' ';
-  if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) || (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX)) { keycode = keycode & 0xFF; }
-  if (keycode < 60) {
-    name = code_to_name[keycode];
-  }
-  // update keylog
-  snprintf(keylog_str, sizeof(keylog_str), "%dx%d, k%2d : %c",
-           record->event.key.row, record->event.key.col,
-           keycode, name);
+void add_keylog(uint16_t keycode) {
+    if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) ||
+        (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX)) { keycode = keycode & 0xFF; }
 
-  // update keylogs
-  if (keylogs_str_idx == sizeof(keylogs_str) - 1) {
-    keylogs_str_idx = 0;
-    for (int i = 0; i < sizeof(keylogs_str) - 1; i++) {
-      keylogs_str[i] = ' ';
+    for (uint8_t i = KEYLOG_LEN - 1; i > 0; i--) {
+        keylog_str[i] = keylog_str[i - 1];
     }
-  }
-
-  keylogs_str[keylogs_str_idx] = name;
-  keylogs_str_idx++;
+    if (keycode < 60) {
+        keylog_str[0] = code_to_name[keycode];
+    }
+    log_timer = timer_read();
 }
 
-const char *read_keylog(void) {
-  return keylog_str;
+void update_log(void) {
+    if (timer_elapsed(log_timer) > 750) {
+        add_keylog(0);
+    }
 }
 
-const char *read_keylogs(void) {
-  return keylogs_str;
-}
-
-
-const char* read_modifier_state(void) {
-  uint8_t modifiers = get_mods();
-  uint8_t one_shot = get_oneshot_mods();
-
-  snprintf(modifier_state_str, sizeof(modifier_state_str), "Mods:%s %s %s %s",
-    (modifiers & MOD_MASK_CTRL || one_shot & MOD_MASK_CTRL) ? "CTL" : "   ",
-    (modifiers & MOD_MASK_GUI || one_shot & MOD_MASK_GUI) ? "GUI" : "   ",
-    (modifiers & MOD_MASK_ALT || one_shot & MOD_MASK_ALT) ? "ALT" : "   ",
-    (modifiers & MOD_MASK_SHIFT || one_shot & MOD_MASK_SHIFT) ? "SFT" : "   "
-  );
-
-  return modifier_state_str;
-}
-
-const char *read_host_led_state(void) {
-  uint8_t leds = host_keyboard_leds();
-
-  snprintf(host_led_state_str, sizeof(host_led_state_str), "NL:%s CL:%s SL:%s",
-    (leds & (1 << USB_LED_NUM_LOCK)) ? "on" : "- ",
-    (leds & (1 << USB_LED_CAPS_LOCK)) ? "on" : "- ",
-    (leds & (1 << USB_LED_SCROLL_LOCK)) ? "on" : "- "
-  );
-
-  return host_led_state_str;
-}
-
-const char* read_layer_state(void) {
-  switch (biton32(layer_state)) {
-    case _RAISE:
-      snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Raise  ");
-      break;
-    case _LOWER:
-      snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Lower  ");
-      break;
-    case _ADJUST:
-      snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Adjust ");
-      break;
-    default:
-      switch (biton32(default_layer_state)) {
-        case _QWERTY:
-          snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Qwerty ");
-          break;
-        case _COLEMAK:
-          snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Colemak");
-          break;
-        case _DVORAK:
-          snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Dvorak ");
-          break;
-        case _WORKMAN:
-          snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Workman");
-          break;
-      }
-      break;
-  }
-
-    return layer_state_str;
-}
-
-void matrix_scan_keymap(void) {
-   iota_gfx_task();
-}
-
-void matrix_render_user(struct CharacterMatrix *matrix) {
-  if (is_master) {
-    //If you want to change the display of OLED, you need to change here
-    matrix_write_ln(matrix, read_layer_state());
-    matrix_write_ln(matrix, read_modifier_state());
-    // matrix_write_ln(matrix, read_keylog());
-    matrix_write_ln(matrix, read_keylogs());
-    // matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
-    // matrix_write(matrix, read_host_led_state());
-    //matrix_write_ln(matrix, read_timelog());
-  } else {
-    matrix_write(matrix, read_logo());
-  }
-}
-
-void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
-  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
-    memcpy(dest->display, source->display, sizeof(dest->display));
-    dest->dirty = true;
-  }
-}
-
-void iota_gfx_task_user(void) {
-  struct CharacterMatrix matrix;
-  matrix_clear(&matrix);
-  matrix_render_user(&matrix);
-  matrix_update(&display, &matrix);
-}
 
 bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case KC_A ... KC_SLASH:
-    case KC_F1 ... KC_F12:
-    case KC_INSERT ... KC_UP:
-    case KC_KP_SLASH ... KC_KP_DOT:
-    case KC_F13 ... KC_F24:
-    if (record->event.pressed) { set_keylog(keycode, record); }
-      break;
-    // set_timelog();
-  }
-  return true;
+    if (record->event.pressed) {  add_keylog(keycode); }
+    return true;
 }
 
-#endif
-
-
-#ifdef OLED_DRIVER_ENABLE
-oled_rotation_t oled_init_user(oled_rotation_t rotation) {
-  if (is_master) {
-    return OLED_ROTATION_270;
-  } else {
-    return rotation;
-  }
-}
-
-void render_crkbd_logo(void) {
-  static const char PROGMEM crkbd_logo[] = {
-      0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94,
-      0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4,
-      0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4,
-      0};
-  oled_write_P(crkbd_logo, false);
-}
-
-
 void render_status(void) {
 
-  oled_write_P(PSTR("Layer"), false);
-  switch (biton32(layer_state)) {
-    case 0:
-      oled_write_P(PSTR("Base "), false);
-      break;
-    case _RAISE:
-      oled_write_P(PSTR("Raise"), false);
-      break;
-    case _LOWER:
-      oled_write_P(PSTR("Lower"), false);
-      break;
-    case _ADJUST:
-      oled_write_P(PSTR("Adjst"), false);
-      break;
-    default:
-      oled_write_P(PSTR("Unkn "), false);
-      break;
-  }
-  oled_write_P(PSTR("Lyout"), false);
-  switch (biton32(default_layer_state)) {
-    case _QWERTY:
-      oled_write_P(PSTR("QWRTY"), false);
-      break;
-    case _COLEMAK:
-      oled_write_P(PSTR("COLMK"), false);
-      break;
-    case _DVORAK:
-      oled_write_P(PSTR("DVRAK"), false);
-      break;
-    case _WORKMAN:
-      oled_write_P(PSTR("WRKMN"), false);
-      break;
-    case _NORMAN:
-      oled_write_P(PSTR("NORMN"), false);
-      break;
-    case _MALTRON:
-      oled_write_P(PSTR("MLTRN"), false);
-      break;
-    case _EUCALYN:
-      oled_write_P(PSTR("ECLYN"), false);
-      break;
-    case _CARPLAX:
-      oled_write_P(PSTR("CRPLX"), false);
-      break;
-  }
+    oled_write_P(PSTR("Layer"), false);
+    switch (biton32(layer_state)) {
+        case 0:
+            oled_write_P(PSTR("Base "), false);
+            break;
+        case _RAISE:
+            oled_write_P(PSTR("Raise"), false);
+            break;
+        case _LOWER:
+            oled_write_P(PSTR("Lower"), false);
+            break;
+        case _ADJUST:
+            oled_write_P(PSTR("Adjst"), false);
+            break;
+        default:
+            oled_write_P(PSTR("Unkn "), false);
+            break;
+    }
+    oled_write_P(PSTR("Lyout"), false);
+    switch (biton32(default_layer_state)) {
+        case _QWERTY:
+            oled_write_P(PSTR("QWRTY"), false);
+            break;
+        case _COLEMAK:
+            oled_write_P(PSTR("COLMK"), false);
+            break;
+        case _DVORAK:
+            oled_write_P(PSTR("DVRAK"), false);
+            break;
+        case _WORKMAN:
+            oled_write_P(PSTR("WRKMN"), false);
+            break;
+        case _NORMAN:
+            oled_write_P(PSTR("NORMN"), false);
+            break;
+        case _MALTRON:
+            oled_write_P(PSTR("MLTRN"), false);
+            break;
+        case _EUCALYN:
+            oled_write_P(PSTR("ECLYN"), false);
+            break;
+        case _CARPLAX:
+            oled_write_P(PSTR("CRPLX"), false);
+            break;
+    }
 
-  uint8_t modifiers = get_mods();
-  uint8_t one_shot = get_oneshot_mods();
+    uint8_t modifiers = get_mods();
+    uint8_t one_shot = get_oneshot_mods();
 
-  oled_write_P(PSTR("Mods:"), false);
-  oled_write_P( (modifiers & MOD_MASK_CTRL  || one_shot & MOD_MASK_CTRL ) ? PSTR(" CTL ") : PSTR("     "), false);
-  oled_write_P( (modifiers & MOD_MASK_GUI   || one_shot & MOD_MASK_GUI  ) ? PSTR(" GUI ") : PSTR("     "), false);
-  oled_write_P( (modifiers & MOD_MASK_ALT   || one_shot & MOD_MASK_ALT  ) ? PSTR(" ALT ") : PSTR("     "), false);
-  oled_write_P( (modifiers & MOD_MASK_SHIFT || one_shot & MOD_MASK_SHIFT) ? PSTR(" SFT ") : PSTR("     "), false);
+    oled_write_P(PSTR("Mods:"), false);
+    oled_write_P( (modifiers & MOD_MASK_SHIFT || one_shot & MOD_MASK_SHIFT) ? PSTR(" SFT ") : PSTR("     "), false);
+    oled_write_P( (modifiers & MOD_MASK_CTRL  || one_shot & MOD_MASK_CTRL ) ? PSTR(" CTL ") : PSTR("     "), false);
+    oled_write_P( (modifiers & MOD_MASK_ALT   || one_shot & MOD_MASK_ALT  ) ? PSTR(" ALT ") : PSTR("     "), false);
+    oled_write_P( (modifiers & MOD_MASK_GUI   || one_shot & MOD_MASK_GUI  ) ? PSTR(" GUI ") : PSTR("     "), false);
 
 
-  oled_write_P(PSTR("BTMGK"), false);
-  static const char PROGMEM mode_logo[4][4] = {
-    {0x95,0x96,0x0a,0},
-    {0xb5,0xb6,0x0a,0},
-    {0x97,0x98,0x0a,0},
-    {0xb7,0xb8,0x0a,0} };
+    oled_write_P(PSTR("BTMGK"), false);
 
-  if (keymap_config.swap_lalt_lgui != false) {
-    oled_write_P(mode_logo[0], false);
-    oled_write_P(mode_logo[1], false);
-  } else {
-    oled_write_P(mode_logo[2], false);
-    oled_write_P(mode_logo[3], false);
-  }
+    if (keymap_config.swap_lalt_lgui) {
+        oled_write_P(PSTR(" Mac "), false);
+    } else {
+        oled_write_P(PSTR(" Win "), false);
+    }
 
-  uint8_t led_usb_state = host_keyboard_leds();
-  oled_write_P(PSTR("Lock:"), false);
-  oled_write_P(led_usb_state & (1<<USB_LED_NUM_LOCK)    ? PSTR(" NUM ") : PSTR("     "), false);
-  oled_write_P(led_usb_state & (1<<USB_LED_CAPS_LOCK)   ? PSTR(" CAPS") : PSTR("     "), false);
-  oled_write_P(led_usb_state & (1<<USB_LED_SCROLL_LOCK) ? PSTR(" SCRL") : PSTR("     "), false);
+    uint8_t led_usb_state = host_keyboard_leds();
+    oled_write_P(PSTR("Lock:"), false);
+    oled_write_P(led_usb_state & (1<<USB_LED_NUM_LOCK)    ? PSTR(" NUM ") : PSTR("     "), false);
+    oled_write_P(led_usb_state & (1<<USB_LED_CAPS_LOCK)   ? PSTR(" CAPS") : PSTR("     "), false);
+    oled_write_P(led_usb_state & (1<<USB_LED_SCROLL_LOCK) ? PSTR(" SCRL") : PSTR("     "), false);
+
+    oled_write(keylog_str, false);
 }
 
 
 void oled_task_user(void) {
-  if (is_master) {
-    render_status();     // Renders the current keyboard state (layer, lock, caps, scroll, etc)
-  } else {
-    render_crkbd_logo();
-    oled_scroll_left();  // Turns on scrolling
-  }
+    if (is_master) {
+        render_status();     // Renders the current keyboard state (layer, lock, caps, scroll, etc)
+    } else {
+        render_crkbd_logo();
+        oled_scroll_left();  // Turns on scrolling
+    }
 }
+
+void matrix_scan_keymap(void) { update_log(); }
 #endif
 
 uint16_t get_tapping_term(uint16_t keycode) {
-  switch (keycode) {
-    case ALT_T(KC_A):
-      return TAPPING_TERM + 100;
-    default:
-      return TAPPING_TERM;
-  }
+    switch (keycode) {
+        case ALT_T(KC_A):
+            return TAPPING_TERM + 100;
+        default:
+            return TAPPING_TERM;
+    }
 }

keyboards/crkbd/keymaps/drashna/rules.mk

@@ -14,9 +14,10 @@ MIDI_ENABLE                = no  # MIDI controls
 AUDIO_ENABLE               = no  # Audio output on port C6
 UNICODE_ENABLE             = no  # Unicode
 BLUETOOTH_ENABLE           = no  # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE            = yes # Enable WS2812 RGB underlight.
+RGBLIGHT_ENABLE            = no  # Enable WS2812 RGB underlight.
 SWAP_HANDS_ENABLE          = no  # Enable one-hand typing
 RGBLIGHT_STARTUP_ANIMATION = yes
+RGB_MATRIX_ENABLE = WS2812
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
@@ -24,3 +25,7 @@ SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 BOOTLOADER = qmk-dfu
 
 OLED_DRIVER_ENABLE = yes
+
+ifneq ($(strip $(OLED_DRIVER_ENABLE)), yes)
+    RGB_MATRIX_SPLIT_RIGHT=yes
+endif

keyboards/crkbd/keymaps/like_jis/keymap.c

@@ -11,11 +11,6 @@
 
 extern keymap_config_t keymap_config;
 
-#ifdef RGBLIGHT_ENABLE
-//Following line allows macro to read current RGB settings
-extern rgblight_config_t rgblight_config;
-#endif
-
 extern uint8_t is_master;
 
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
@@ -241,6 +236,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 void matrix_init_user(void) {
   #ifdef RGBLIGHT_ENABLE
     RGB_current_mode = rgblight_config.mode;
+    UPDATE_KEYMAP_STATUS();
   #endif
   //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
   #ifdef SSD1306OLED

keyboards/crkbd/keymaps/rs/config.h

@@ -20,12 +20,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-// place overrides here
-
-/* Use I2C or Serial, not both */
-
-#define USE_SERIAL
-// #define USE_I2C
+//#define USE_MATRIX_I2C
 
 /* Select hand configuration */
 
@@ -33,10 +28,17 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define MASTER_RIGHT
 // #define EE_HANDS
 
+#define SSD1306OLED
+
+#define USE_SERIAL_PD2
+
+#define TAPPING_FORCE_HOLD
+#define TAPPING_TERM 300
 
 #undef RGBLED_NUM
 #define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 24
+#define RGBLED_NUM 27
+#define RGBLIGHT_LIMIT_VAL 120
 #define RGBLIGHT_HUE_STEP 10
 #define RGBLIGHT_SAT_STEP 17
 #define RGBLIGHT_VAL_STEP 17

keyboards/crkbd/keymaps/rs/keymap.c

@@ -0,0 +1,39 @@
+#include QMK_KEYBOARD_H
+#include "rs.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT_kc(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+     TAB , Q  , W  , E  , R  , T  ,                Y  , U  , I  , O  , P  ,EQL ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     ESCC, A  , S  , D  , F  , G  ,                H  , J  , K  , L  ,SCLN,QUOT,
+  //|----+----+----+----+----+----+              |----+----+----+----+----+----|
+     LSFT, Z  , X  , C  , V  , B  ,                N  , M  ,COMM,DOT ,SLSH,ENTS,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                       LALT,LGUI,SPC ,         BSPC,CODE,FN
+  //                  `----+----+----'        `+---+----+----'c
+  ),
+  [_CODE] = LAYOUT_kc(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+     GRV ,EXLM, AT ,HASH, DLR,PERC,               CIRC,LPLT,ASTR,RPGT,NEQL,    ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+         , 1  , 2  , 3  , 4  , 5  ,               MINS,LBRC, UP ,RBRC,    ,BSLS,
+  //|----+----+----+----+----+----+              |----+----+----+----+----+----|
+         , 6  , 7  , 8  , 9  , 0  ,               AMPR,LEFT,DOWN,RGHT,    ,PIPE,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                           ,    ,DOT ,             ,    ,
+  //                  `----+----+----'        `----+----+----'
+  ),
+  [_FN] = LAYOUT_kc(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+         , F1 , F2 , F3 , F4 , F5 ,                F6 , F7 , F8 , F9 , F10, F11,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     LTOG,LHUI,LSAI,LVAI,LRST,BRMU,               VOLU,    ,PGUP,    ,    ,    ,
+  //|----+----+----+----+----+----+              |----+----+----+----+----+----|
+     LMOD,LHUD,LSAD,LVAD,RST ,BRMD,               VOLD,CTRA,PGDN,CTRE,    ,    ,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                           ,    ,    ,         MUTE,    ,     
+  //                  `----+----+----'        `----+----+----'
+  ),
+};
+

keyboards/crkbd/keymaps/rs/oled.c

@@ -0,0 +1,104 @@
+#ifdef SSD1306OLED
+#include QMK_KEYBOARD_H
+#include "ssd1306.h"
+#ifdef PROTOCOL_LUFA
+#include "lufa.h"
+#include "split_util.h"
+#endif
+
+extern uint8_t is_master;
+
+// When add source files to SRC in rules.mk, you can use functions.
+const char *read_logo(void);
+const char *read_keylog(void);
+const char *read_keylogs(void);
+void set_keylog(uint16_t keycode, keyrecord_t *record);
+
+void matrix_scan_user(void) { iota_gfx_task(); }
+
+typedef struct {
+  uint8_t state;
+  char name[8];
+} LAYER_DISPLAY_NAME;
+
+#define LAYER_DISPLAY_MAX 5
+const LAYER_DISPLAY_NAME layer_display_name[LAYER_DISPLAY_MAX] = {
+  {0, "Base"},
+  {2, "Code"},
+  {4, "Fn"},
+  {6, "Fn+Code"},
+  {__UINT8_MAX__, "?"},
+};
+static uint8_t layer_name_idx;
+static char layer_status_buf[24] = "Layer: Base\n";
+
+#ifdef RGBLIGHT_ENABLE
+// Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+void update_keymap_status(void) {
+  snprintf(layer_status_buf, sizeof(layer_status_buf) - 1, "Layer:%s RGB: %d\n",
+           layer_display_name[layer_name_idx].name, rgblight_config.mode);
+}
+#else
+void update_keymap_status(void) {
+  snprintf(layer_status_buf, sizeof(layer_status_buf) - 1, "Layer:%s\n",
+           layer_display_name[layer_name_idx].name);
+}
+#endif
+
+void matrix_init_user(void) {
+  iota_gfx_init(!has_usb()); // turns on the display
+  update_keymap_status();
+}
+
+// declared in users/rs/rs.c
+void rgb_mod_changed_keymap(void) {
+  update_keymap_status();
+}
+
+// declared in users/rs/rs.c
+void keylog_set_keymap(uint16_t keycode, keyrecord_t *record) {
+  set_keylog(keycode, record);
+}
+
+uint32_t layer_state_set_user(uint32_t state) {
+  for (layer_name_idx = 0; layer_name_idx < LAYER_DISPLAY_MAX; ++layer_name_idx) {
+    if (state == 0 && layer_display_name[layer_name_idx].state == default_layer_state) {
+      break;
+    } else if (state != 0 && layer_display_name[layer_name_idx].state == state) {
+      break;
+    }
+  }
+  update_keymap_status();
+  return state;
+}
+
+static inline void render_keymap_status(struct CharacterMatrix *matrix) {
+  matrix_write(matrix, layer_status_buf);
+}
+
+void matrix_render_user(struct CharacterMatrix *matrix) {
+  if (is_master) {
+    render_keymap_status(matrix);
+    matrix_write_ln(matrix, read_keylog());
+    matrix_write_ln(matrix, read_keylogs());
+  } else {
+    matrix_write(matrix, read_logo());
+  }
+}
+
+void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
+  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+    memcpy(dest->display, source->display, sizeof(dest->display));
+    dest->dirty = true;
+  }
+}
+
+void iota_gfx_task_user(void) {
+  struct CharacterMatrix matrix;
+  matrix_clear(&matrix);
+  matrix_render_user(&matrix);
+  matrix_update(&display, &matrix);
+}
+
+#endif

keyboards/crkbd/keymaps/rs/readme.md

@@ -0,0 +1,19 @@
+# RS40: Code Friendly 40% Keymap
+
+This keymap is an evolution of my previous keymap optimized for coding with a 60% keyboards like the Iris. I tried to keep the simplicity of my previous keymap with all the keys necessary for coding on a single layer in addition to the base one.
+
+Because I sometime have to use my internal keyboard I my macbook, a karabiner configuration is also provided to get most of the features of this keyboard, including the code layer / backspace on right command key etc.
+
+See [rs readme](../../../../users/rs/readme.md) for a list of other keyboards supported by this keymap.
+
+## Base Layer
+
+[![](http://poitr.us/moooMf+)](http://www.keyboard-layout-editor.com/##@_backcolor=%23d8c1f5&switchMount=cherry&pcb:false&plate:true%3B&@_x:3&c=%236750f2&t=%2344b8b8&a:7%3B&=E&_x:8%3B&=I%3B&@_y:-0.87&x:2%3B&=W&_x:1%3B&=R&_x:6%3B&=U&_x:1%3B&=O%3B&@_y:-0.8799999999999999&x:5%3B&=T&_x:4%3B&=Y%3B&@_y:-0.87&c=%233a1ee6&t=%23b84465%3B&=Tab&_c=%236750f2&t=%2344b8b8%3B&=Q&_x:12%3B&=P&_c=%233a1ee6&t=%23b84465&a:5%3B&=+%0A%2F=%3B&@_y:-0.3799999999999999&x:3&c=%236750f2&t=%2344b8b8&a:7%3B&=D&_x:8%3B&=K%3B&@_y:-0.8700000000000001&x:2%3B&=S&_x:1%3B&=F&_x:6%3B&=J&_x:1%3B&=L%3B&@_y:-0.8799999999999999&x:5%3B&=G&_x:4%3B&=H%3B&@_y:-0.8700000000000001&c=%233a1ee6&t=%23b84465&a:5%3B&=Esc%0ACtrl&_c=%236750f2&t=%2344b8b8&a:7%3B&=A&_x:12&a:5%3B&=%2F:%0A%2F%3B&_c=%233a1ee6&t=%23b84465%3B&=%22%0A'%3B&@_y:-0.3799999999999999&x:3&c=%236750f2&t=%2344b8b8&a:7%3B&=C&_x:8&a:5%3B&=%3C%0A,%3B&@_y:-0.8700000000000001&x:2&a:7%3B&=X&_x:1%3B&=V&_x:6%3B&=M&_x:1&a:5%3B&=%3E%0A.%3B&@_y:-0.8799999999999999&x:5&a:7%3B&=B&_x:4%3B&=N%3B&@_y:-0.8700000000000001&c=%233a1ee6&t=%23b84465%3B&=Shift&_c=%236750f2&t=%2344b8b8%3B&=Z&_x:12&a:5%3B&=%3F%0A%2F%2F&_c=%233a1ee6&t=%23b84465&a:7%3B&=Enter%3B&@_y:-0.17999999999999972&x:11.75%3B&=Fn%3B&@_ry:0.25&y:2.95&x:3.3%3B&=Alt%3B&@_r:12&ry:1.75&y:0.5&x:4.8%3B&=Cmd%3B&@_r:35&rx:6.5&ry:4.25&y:-0.75&x:-0.75&c=%23d12424&t=%23ffffff&h:1.5%3B&=Space%3B&@_r:-35&rx:13&y:-2.75&x:-3.0999999999999996&h:1.5%3B&=Back%20Space%3B&@_r:-12&rx:0&ry:0&y:5.55&x:9.55&c=%233a1ee6&t=%23b84465%3B&=Code)
+
+## Code Layer
+
+[![](http://poitr.us/GvljvC+)](http://www.keyboard-layout-editor.com/##@_backcolor=%23d8c1f5&switchMount=cherry&pcb:false&plate:true%3B&@_x:3&c=%236750f2&t=%2344b8b8&a:7%3B&=%23&_x:8%3B&=*%3B&@_y:-0.87&x:2%3B&=%2F@&_x:1%3B&=$&_x:6&a:5%3B&=%3C%0A(&_x:1%3B&=%3E%0A)%3B&@_y:-0.8799999999999999&x:5&a:7%3B&=%25&_x:4%3B&=%5E%3B&@_y:-0.87&c=%233a1ee6&t=%23b84465%3B&=Tab&_c=%236750f2&t=%2344b8b8%3B&=!&_x:12%3B&=!%2F=&_c=%233a1ee6&t=%23b84465&a:5%3B&=+%0A%2F=%3B&@_y:-0.3799999999999999&x:3&c=%236750f2&t=%2344b8b8&a:7%3B&=3&_x:8%3B&=↑%3B&@_y:-0.8700000000000001&x:2%3B&=2&_x:1%3B&=4&_x:6&a:5%3B&=%7B%0A%5B&_x:1%3B&=%7D%0A%5D%3B&@_y:-0.8799999999999999&x:5&a:7%3B&=5&_x:4&a:5%3B&=%2F_%0A-%3B&@_y:-0.8700000000000001&c=%233a1ee6&t=%23b84465%3B&=Esc%0ACtrl&_c=%236750f2&t=%2344b8b8&a:7%3B&=1&_x:12&a:5%3B&=%2F:%0A%2F%3B&_c=%233a1ee6&t=%23b84465%3B&=%7C%0A%5C%3B&@_y:-0.3799999999999999&x:3&c=%236750f2&t=%2344b8b8&a:7%3B&=8&_x:8%3B&=↓%3B&@_y:-0.8700000000000001&x:2%3B&=7&_x:1%3B&=9&_x:6%3B&=←&_x:1%3B&=→%3B&@_y:-0.8799999999999999&x:5%3B&=0&_x:4%3B&=%2F&%3B&@_y:-0.8700000000000001&c=%233a1ee6&t=%23b84465%3B&=Shift&_c=%236750f2&t=%2344b8b8%3B&=6&_x:12&a:5%3B&=%3F%0A%2F%2F&_c=%233a1ee6&t=%23b84465&a:7%3B&=Enter%3B&@_y:-0.17999999999999972&x:11.75%3B&=Fn%3B&@_ry:0.25&y:2.95&x:3.3%3B&=Alt%3B&@_r:12&ry:1.75&y:0.5&x:4.8%3B&=Cmd%3B&@_r:35&rx:6.5&ry:4.25&y:-0.75&x:-0.75&c=%23d12424&t=%23ffffff&h:1.5%3B&=.%3B&@_r:-35&rx:13&y:-2.75&x:-3.0999999999999996&h:1.5%3B&=Back%20Space%3B&@_r:-12&rx:0&ry:0&y:5.55&x:9.55&c=%233a1ee6&t=%23b84465%3B&=Code)
+
+## Fn Layer
+
+[![](http://poitr.us/OXwmBK+)](http://www.keyboard-layout-editor.com/##@_backcolor=%23d8c1f5&switchMount=cherry&pcb:false&plate:true%3B&@_x:3&c=%236750f2&t=%2344b8b8&a:7%3B&=F3&_x:8%3B&=F8%3B&@_y:-0.87&x:2%3B&=F2&_x:1%3B&=F4&_x:6%3B&=F7&_x:1%3B&=F9%3B&@_y:-0.8799999999999999&x:5%3B&=F5&_x:4%3B&=F6%3B&@_y:-0.87&c=%233a1ee6&t=%23b84465%3B&=&_c=%236750f2&t=%2344b8b8%3B&=F1&_x:12%3B&=F10&_c=%233a1ee6&t=%23b84465%3B&=F11%3B&@_y:-0.3799999999999999&x:3&c=%236750f2&t=%2344b8b8%3B&=RGB%20Value+&_x:8%3B&=Page%20Up%3B&@_y:-0.8700000000000001&x:2%3B&=RGB%20Sat+&_x:1%3B&=RGB%20Reset&_x:6%3B&=&_x:1%3B&=%3B&@_y:-0.8799999999999999&x:5%3B&=Bright+&_x:4%3B&=Vol+%3B&@_y:-0.8700000000000001&c=%233a1ee6&t=%23b84465%3B&=RGB%20Toggle&_c=%236750f2&t=%2344b8b8%3B&=RGB%20Hue+&_x:12%3B&=&_c=%233a1ee6&t=%23b84465%3B&=%3B&@_y:-0.3799999999999999&x:3&c=%236750f2&t=%2344b8b8%3B&=RGB%20Value-&_x:8%3B&=Page%20Down%3B&@_y:-0.8700000000000001&x:2%3B&=RGB%20Sat-&_x:1%3B&=Reset&_x:6%3B&=Ctrl+A&_x:1%3B&=Ctrl+E%3B&@_y:-0.8799999999999999&x:5%3B&=Bright-&_x:4%3B&=Vol-%3B&@_y:-0.8700000000000001&c=%233a1ee6&t=%23b84465%3B&=RGB%20Mode&_c=%236750f2&t=%2344b8b8%3B&=RGB%20Hue-&_x:12%3B&=&_c=%233a1ee6&t=%23b84465%3B&=%3B&@_y:-0.17999999999999972&x:11.75%3B&=Fn%3B&@_ry:0.25&y:2.95&x:3.3%3B&=%3B&@_r:12&ry:1.75&y:0.5&x:4.8%3B&=%3B&@_r:35&rx:6.5&ry:4.25&y:-0.75&x:-0.75&c=%23d12424&t=%23ffffff&h:1.5%3B&=%3B&@_r:-35&rx:13&y:-2.75&x:-3.0999999999999996&h:1.5%3B&=Mute%3B&@_r:-12&rx:0&ry:0&y:5.55&x:9.55&c=%233a1ee6&t=%23b84465%3B&=Code)

keyboards/crkbd/keymaps/rs/rules.mk

@@ -0,0 +1,32 @@
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight. 
+SWAP_HANDS_ENABLE = no      # Enable one-hand typing
+TAP_DANCE_ENABLE = no
+
+BOOTLOADER = atmel-dfu
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+# If you want to change the display of OLED, you need to change here
+SRC +=  oled.c \
+        ./lib/glcdfont.c \
+        ./lib/rgb_state_reader.c \
+        ./lib/layer_state_reader.c \
+        ./lib/logo_reader.c \
+        ./lib/keylogger.c \

keyboards/crkbd/rev1/rev1.c

@@ -51,78 +51,65 @@ void led_set_kb(uint8_t usb_led) {
   //          05    06       06    05
   //           15 14 07     07 14 15              3
 
-/* {row | col << 4} logical layout rows/cols
- *      |                    {x=0..224,     y=0..64} physical layout
- *      |                            |           |     modifier
- *      |                            |           |   */
-#define RGB_MATRIX_LEFT_LEDS  \
-    { { 0xFF           }, {  85, 16 }, 2 }, /*  1 */ \
-    { { 0xFF           }, {  50, 13 }, 2 }, /*  2 */ \
-    { { 0xFF           }, {  16, 20 }, 2 }, /*  3 */ \
-    { { 0xFF           }, {  16, 38 }, 2 }, /*  4 */ \
-    { { 0xFF           }, {  50, 48 }, 2 }, /*  5 */ \
-    { { 0xFF           }, {  85, 52 }, 2 }, /*  6 */ \
-    { { 3 | ( 5 << 4 ) }, {  95, 63 }, 1 }, /*  7 */ \
-    { { 2 | ( 5 << 4 ) }, {  85, 39 }, 4 }, /*  8 */ \
-    { { 1 | ( 5 << 4 ) }, {  85, 21 }, 4 }, /*  9 */ \
-    { { 0 | ( 5 << 4 ) }, {  85,  4 }, 4 }, /* 10 */ \
-    { { 0 | ( 4 << 4 ) }, {  68, 02 }, 4 }, /* 11 */ \
-    { { 1 | ( 4 << 4 ) }, {  68, 19 }, 4 }, /* 12 */ \
-    { { 2 | ( 4 << 4 ) }, {  68, 37 }, 4 }, /* 13 */ \
-    { { 3 | ( 4 << 4 ) }, {  80, 58 }, 1 }, /* 14 */ \
-    { { 3 | ( 3 << 4 ) }, {  60, 55 }, 1 }, /* 15 */ \
-    { { 2 | ( 3 << 4 ) }, {  50, 35 }, 4 }, /* 16 */ \
-    { { 1 | ( 3 << 4 ) }, {  50, 13 }, 4 }, /* 17 */ \
-    { { 0 | ( 3 << 4 ) }, {  50,  0 }, 4 }, /* 18 */ \
-    { { 0 | ( 2 << 4 ) }, {  33,  3 }, 4 }, /* 19 */ \
-    { { 1 | ( 2 << 4 ) }, {  33, 20 }, 4 }, /* 20 */ \
-    { { 2 | ( 2 << 4 ) }, {  33, 37 }, 4 }, /* 21 */ \
-    { { 2 | ( 1 << 4 ) }, {  16, 42 }, 4 }, /* 22 */ \
-    { { 1 | ( 1 << 4 ) }, {  16, 24 }, 4 }, /* 23 */ \
-    { { 0 | ( 1 << 4 ) }, {  16,  7 }, 4 }, /* 24 */ \
-    { { 0 | ( 0 << 4 ) }, {   0,  7 }, 1 }, /* 25 */ \
-    { { 1 | ( 0 << 4 ) }, {   0, 24 }, 1 }, /* 26 */ \
-    { { 2 | ( 0 << 4 ) }, {   0, 41 }, 1 }, /* 27 */
-
-#define RGB_MATRIX_RIGHT_LEDS  \
-    { { 0xFF           }, { 139, 16 }, 2 }, /*  1 */ \
-    { { 0xFF           }, { 174, 13 }, 2 }, /*  2 */ \
-    { { 0xFF           }, { 208, 20 }, 2 }, /*  3 */ \
-    { { 0xFF           }, { 208, 38 }, 2 }, /*  4 */ \
-    { { 0xFF           }, { 174, 48 }, 2 }, /*  5 */ \
-    { { 0xFF           }, { 139, 52 }, 2 }, /*  6 */ \
-    { { 7 | ( 5 << 4 ) }, { 129, 63 }, 1 }, /*  7 */ \
-    { { 6 | ( 5 << 4 ) }, { 139, 39 }, 4 }, /*  8 */ \
-    { { 5 | ( 5 << 4 ) }, { 139, 21 }, 4 }, /*  9 */ \
-    { { 4 | ( 5 << 4 ) }, { 139,  4 }, 4 }, /* 10 */ \
-    { { 4 | ( 4 << 4 ) }, { 156, 02 }, 4 }, /* 11 */ \
-    { { 5 | ( 4 << 4 ) }, { 156, 19 }, 4 }, /* 12 */ \
-    { { 6 | ( 4 << 4 ) }, { 156, 37 }, 4 }, /* 13 */ \
-    { { 7 | ( 4 << 4 ) }, { 144, 58 }, 1 }, /* 14 */ \
-    { { 7 | ( 3 << 4 ) }, { 164, 55 }, 1 }, /* 15 */ \
-    { { 6 | ( 3 << 4 ) }, { 174, 35 }, 4 }, /* 16 */ \
-    { { 5 | ( 3 << 4 ) }, { 174, 13 }, 4 }, /* 17 */ \
-    { { 4 | ( 3 << 4 ) }, { 174,  0 }, 4 }, /* 18 */ \
-    { { 4 | ( 2 << 4 ) }, { 191,  3 }, 4 }, /* 19 */ \
-    { { 5 | ( 2 << 4 ) }, { 191, 20 }, 4 }, /* 20 */ \
-    { { 6 | ( 2 << 4 ) }, { 191, 37 }, 4 }, /* 21 */ \
-    { { 6 | ( 1 << 4 ) }, { 208, 42 }, 4 }, /* 22 */ \
-    { { 5 | ( 1 << 4 ) }, { 208, 24 }, 4 }, /* 23 */ \
-    { { 4 | ( 1 << 4 ) }, { 208,  7 }, 4 }, /* 24 */ \
-    { { 4 | ( 0 << 4 ) }, { 224,  7 }, 1 }, /* 25 */ \
-    { { 5 | ( 0 << 4 ) }, { 224, 24 }, 1 }, /* 26 */ \
-    { { 6 | ( 0 << 4 ) }, { 224, 41 }, 1 }, /* 27 */
 
 #ifdef RGB_MATRIX_SPLIT_RIGHT
-rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
-        RGB_MATRIX_RIGHT_LEDS
-        RGB_MATRIX_LEFT_LEDS
-    };
+led_config_t g_led_config = { {
+    {  51,  50,  45,  44,  37,  36, NO_LED },
+    {  52,  49,  46,  43,  38,  35, NO_LED },
+    {  53,  48,  47,  42,  39,  34, NO_LED },
+    { NO_LED, NO_LED, NO_LED,  41,  40,  33, NO_LED },
+    {  24,  23,  18,  17,  10,   9, NO_LED },
+    {  25,  22,  19,  16,  11,   8, NO_LED },
+    {  26,  21,  20,  15,  12,   7, NO_LED },
+    { NO_LED, NO_LED, NO_LED,  14,  13,   6, NO_LED }
+}, {
+    { 139,  16 }, { 174,  13 }, { 208,  20 }, { 208,  38 }, { 174,  48 }, { 139,  52 }, { 129,  63 },
+    { 139,  39 }, { 139,  21 }, { 139,   4 }, { 156,   2 }, { 156,  19 }, { 156,  37 }, { 144,  58 },
+    { 164,  55 }, { 174,  35 }, { 174,  13 }, { 174,   0 }, { 191,   3 }, { 191,  20 }, { 191,  37 },
+    { 208,  42 }, { 208,  24 }, { 208,   7 }, { 224,   7 }, { 224,  24 }, { 224,  41 }, {  85,  16 },
+    {  50,  13 }, {  16,  20 }, {  16,  38 }, {  50,  48 }, {  85,  52 }, {  95,  63 }, {  85,  39 },
+    {  85,  21 }, {  85,   4 }, {  68,   2 }, {  68,  19 }, {  68,  37 }, {  80,  58 }, {  60,  55 },
+    {  50,  35 }, {  50,  13 }, {  50,   0 }, {  33,   3 }, {  33,  20 }, {  33,  37 }, {  16,  42 },
+    {  16,  24 }, {  16,   7 }, {   0,   7 }, {   0,  24 }, {   0,  41 }
+}, {
+    2, 2, 2, 2, 2, 2, 1,
+    4, 4, 4, 4, 4, 4, 1,
+    1, 4, 4, 4, 4, 4, 4,
+    4, 4, 4, 1, 1, 1, 2,
+    2, 2, 2, 2, 2, 1, 4,
+    4, 4, 4, 4, 4, 1, 1,
+    4, 4, 4, 4, 4, 4, 4,
+    4, 4, 1, 1, 1
+} };
 #else
-rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
-        RGB_MATRIX_LEFT_LEDS
-        RGB_MATRIX_RIGHT_LEDS
-    };
+led_config_t g_led_config = { {
+    {  24,  23,  18,  17,  10,   9, NO_LED },
+    {  25,  22,  19,  16,  11,   8, NO_LED },
+    {  26,  21,  20,  15,  12,   7, NO_LED },
+    { NO_LED, NO_LED, NO_LED,  14,  13,   6, NO_LED },
+    {  51,  50,  45,  44,  37,  36, NO_LED },
+    {  52,  49,  46,  43,  38,  35, NO_LED },
+    {  53,  48,  47,  42,  39,  34, NO_LED },
+    { NO_LED, NO_LED, NO_LED,  41,  40,  33, NO_LED }
+}, {
+    {  85,  16 }, {  50,  13 }, {  16,  20 }, {  16,  38 }, {  50,  48 }, {  85,  52 }, {  95,  63 },
+    {  85,  39 }, {  85,  21 }, {  85,   4 }, {  68,   2 }, {  68,  19 }, {  68,  37 }, {  80,  58 },
+    {  60,  55 }, {  50,  35 }, {  50,  13 }, {  50,   0 }, {  33,   3 }, {  33,  20 }, {  33,  37 },
+    {  16,  42 }, {  16,  24 }, {  16,   7 }, {   0,   7 }, {   0,  24 }, {   0,  41 }, { 139,  16 },
+    { 174,  13 }, { 208,  20 }, { 208,  38 }, { 174,  48 }, { 139,  52 }, { 129,  63 }, { 139,  39 },
+    { 139,  21 }, { 139,   4 }, { 156,   2 }, { 156,  19 }, { 156,  37 }, { 144,  58 }, { 164,  55 },
+    { 174,  35 }, { 174,  13 }, { 174,   0 }, { 191,   3 }, { 191,  20 }, { 191,  37 }, { 208,  42 },
+    { 208,  24 }, { 208,   7 }, { 224,   7 }, { 224,  24 }, { 224,  41 }
+}, {
+    2, 2, 2, 2, 2, 2, 1,
+    4, 4, 4, 4, 4, 4, 1,
+    1, 4, 4, 4, 4, 4, 4,
+    4, 4, 4, 1, 1, 1, 2,
+    2, 2, 2, 2, 2, 1, 4,
+    4, 4, 4, 4, 4, 1, 1,
+    4, 4, 4, 4, 4, 4, 4,
+    4, 4, 1, 1, 1
+} };
 #endif
 
 #endif

keyboards/doro67/rgb/rgb.c

@@ -14,6 +14,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "rgb.h"
+#include "rgb_matrix_types.h"
 
 // Optional override functions below.
 // You can leave any or all of these undefined.
@@ -52,76 +53,32 @@ void led_set_kb(uint8_t usb_led) {
 	led_set_user(usb_led);
 }
 
-rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
-    {{0|(0<<4)},   {15*0, 0},  4},     // Esc
-    {{0|(1<<4)},   {15*1, 0},  4},     // 1
-    {{0|(2<<4)},   {15*2, 0},  4},     // 2
-    {{0|(3<<4)},   {15*3, 0},  4},     // 3
-    {{0|(4<<4)},   {15*4, 0},  4},     // 4
-    {{0|(5<<4)},   {15*5, 0},  4},     // 5
-    {{0|(6<<4)},   {15*6, 0},  4},     // 6
-    {{0|(7<<4)},   {15*7, 0},  4},     // 7
-    {{0|(8<<4)},   {15*8, 0},  4},     // 8
-    {{0|(9<<4)},   {15*9, 0},  4},     // 9
-    {{0|(10<<4)},  {15*10, 0}, 4},     // 0
-    {{0|(11<<4)},  {15*11, 0}, 4},     // -
-    {{0|(12<<4)},  {15*12, 0}, 4},     // =
-    {{0|(13<<4)},  {15*13.5, 0}, 1},   // Backspace
-    {{0|(14<<4)},  {15*15, 0},   1},   // Ins
-
-    {{1|(0<<4)},   {15*0.5, 16},  1},  // Tab
-    {{1|(1<<4)},   {15*1.5, 16},  4},  // Q
-    {{1|(2<<4)},   {15*2.5, 16},  4},  // W
-    {{1|(3<<4)},   {15*3.5, 16},  4},  // E
-    {{1|(4<<4)},   {15*4.5, 16},  4},  // R
-    {{1|(5<<4)},   {15*5.5, 16},  4},  // T
-    {{1|(6<<4)},   {15*6.5, 16},  4},  // Y
-    {{1|(7<<4)},   {15*7.5, 16},  4},  // U
-    {{1|(8<<4)},   {15*8.5, 16},  4},  // I
-    {{1|(9<<4)},   {15*9.5, 16},  4},  // O
-    {{1|(10<<4)},  {15*10.5, 16}, 4},  // P
-    {{1|(11<<4)},  {15*11.5, 16}, 4},  // [
-    {{1|(12<<4)},  {15*12.5, 16},  4}, // ]
-    {{1|(13<<4)},  {15*13.75, 16}, 1}, //
-    {{1|(14<<4)},  {15*15, 16},    1}, // Del
-
-    {{2|(0<<4)},   {15*0.75, 32},  1}, // Capslock
-    {{2|(1<<4)},   {15*1.75, 32},  4}, // A
-    {{2|(2<<4)},   {15*2.75, 32},  4}, // S
-    {{2|(3<<4)},   {15*3.75, 32},  4}, // D
-    {{2|(4<<4)},   {15*4.75, 32},  4}, // F
-    {{2|(5<<4)},   {15*5.75, 32},  4}, // G
-    {{2|(6<<4)},   {15*6.75, 32},  4}, // H
-    {{2|(7<<4)},   {15*7.75, 32},  4}, // J
-    {{2|(8<<4)},   {15*8.75, 32},  4}, // K
-    {{2|(9<<4)},   {15*9.75, 32},  4}, // L
-    {{2|(10<<4)},  {15*10.75, 32}, 4}, // ;
-    {{2|(11<<4)},  {15*11.75, 32}, 4}, // '
-    {{2|(13<<4)},  {15*13.25, 32}, 1}, // Enter
-    {{2|(14<<4)},  {15*15, 32},    1}, // Pgup
-
-    {{3|(0<<4)},   {15*1.25, 48},  1}, // LShift
-    {{3|(2<<4)},   {15*2, 48},  4},    // Z
-    {{3|(3<<4)},   {15*3, 48},  4},    // X
-    {{3|(4<<4)},   {15*4, 48},  4},    // C
-    {{3|(5<<4)},   {15*5, 48},  4},    // V
-    {{3|(6<<4)},   {15*6, 48},  4},    // B
-    {{3|(7<<4)},   {15*7, 48},  4},    // N
-    {{3|(8<<4)},   {15*8, 48},  4},    // M
-    {{3|(9<<4)},   {15*9, 48},  4},    // ,
-    {{3|(10<<4)},  {15*10, 48},  4},   // .
-    {{3|(11<<4)},  {15*11, 48}, 4},    // /
-    {{3|(12<<4)},  {15*12.75, 48}, 1}, // Shift
-    {{3|(13<<4)},  {15*14, 48}, 1},    // Up
-    {{3|(14<<4)},  {15*15, 48}, 1},    // Pgdn
-
-    {{4|(0<<4)},   {15*0.25,  64}, 1}, // Ctrl
-    {{4|(1<<4)},   {15*1.5,   64}, 1}, // GUI
-    {{4|(2<<4)},   {15*2.25,  64}, 1}, // Alt
-    {{4|(3<<4)},   {15*6.75,  64}, 4}, // Space
-    {{4|(9<<4)},   {15*9,     64}, 1}, // RAlt
-    {{4|(10<<4)},  {15*10.25, 64}, 1}, // FN
-    {{4|(12<<4)},  {15*13,    64}, 1}, // Left
-    {{4|(13<<4)},  {15*14,    64}, 1}, // Down
-    {{4|(14<<4)},  {15*15,    64}, 1}, // Right
-};
+led_config_t g_led_config = { {
+  {   0,   1,   2,   3,   4,   5,   6,   7,   8,   9,  10,  11,  12,  13,  14 },
+  {  15,  16,  17,  18,  19,  20,  21,  22,  23,  24,  25,  26,  27,  28,  29 },
+  {  30,  31,  32,  33,  34,  35,  36,  37,  38,  39,  40,  41, NO_LED,  42,  43 },
+  {  44, NO_LED,  45,  46,  47,  48,  49,  50,  51,  52,  53,  54,  55,  56,  57 },
+  {  58,  59,  60,  61, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED,  62,  63, NO_LED,  64,  65,  66 }
+}, {
+    // Esc, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, -, =, Backspace, Ins
+    {   0,   0 }, {  15,   0 }, {  30,   0 }, {  45,   0 }, {  60,   0 }, {  75,   0 }, {  90,   0 }, { 105,   0 }, { 120,   0 }, { 135,   0 }, { 150,   0 }, { 165,   0 }, { 180,   0 }, { 202,   0 }, { 225,   0 },
+    // Tab, Q, W, E, R, T, Y, U, I, O, P, [, ],  , Del
+    {   7,  16 }, {  22,  16 }, {  37,  16 }, {  52,  16 }, {  67,  16 }, {  82,  16 }, {  97,  16 }, { 112,  16 }, { 127,  16 }, { 142,  16 }, { 157,  16 }, { 172,  16 }, { 187,  16 }, { 206,  16 }, { 225,  16 },
+    // Capslock, A, S, D, F, G, H, J, K, L, ;, ', Enter, Pgup
+    {  11,  32 }, {  26,  32 }, {  41,  32 }, {  56,  32 }, {  71,  32 }, {  86,  32 }, { 101,  32 }, { 116,  32 }, { 131,  32 }, { 146,  32 }, { 161,  32 }, { 176,  32 }, { 198,  32 }, { 225,  32 },
+    // LShift, Z, X, C, V, B, N, M, ,, ., /, Shift, Up, Pgdn
+    {  18,  48 }, {  30,  48 }, {  45,  48 }, {  60,  48 }, {  75,  48 }, {  90,  48 }, { 105,  48 }, { 120,  48 }, { 135,  48 }, { 150,  48 }, { 165,  48 }, { 191,  48 }, { 210,  48 }, { 225,  48 },
+    // Ctrl, GUI, Alt, Space, RAlt, FN, Left, Down, Right
+    {   3,  64 }, {  22,  64 }, {  33,  64 }, { 101,  64 }, { 135,  64 }, { 153,  64 }, { 195,  64 }, { 210,  64 }, { 225,  64 }
+}, {
+    // Esc, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, -, =, Backspace, Ins
+    4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1,
+    // Tab, Q, W, E, R, T, Y, U, I, O, P, [, ],  , Del
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1,
+    // Capslock, A, S, D, F, G, H, J, K, L, ;, ', Enter, Pgup
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1,
+    // LShift, Z, X, C, V, B, N, M, ,, ., /, Shift, Up, Pgdn
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1,
+    // Ctrl, GUI, Alt, Space, RAlt, FN, Left, Down, Right
+    1, 1, 1, 4, 1, 1, 1, 1, 1
+} };

keyboards/dz60/dz60.h

@@ -386,4 +386,31 @@
     { k40,   k41,   KC_NO, k43,  KC_NO, KC_NO, k46,  KC_NO, KC_NO, KC_NO, KC_NO, k4b,  KC_NO, k4d,  k4e   }  \
 }
 
+/* LAYOUT_60_iso_split_space_bs_rshift
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │0e │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+ * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │     │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐2d  │
+ * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │1e │    │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┤
+ * │30  |31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3d    │3e │
+ * ├────┼───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴───┼───┴┬────┬┴───┤
+ * │40  │41  │43  │44      │46  │48        │4a  │4b  │4d  │4e  │
+ * └────┴────┴────┴────────┴────┴──────────┴────┴────┴────┴────┘
+*/
+#define LAYOUT_60_iso_split_space_bs_rshift( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d,      \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k1e, k2d, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3d, k3e, \
+    k40, k41,      k43, k44,      k46,      k48,      k4a, k4b, k4c, k4d, k4e  \
+) { \
+    { k00,  k01,   k02,   k03,  k04,  k05,   k06,  k07,   k08,  k09,   k0a,  k0b,   k0c,  k0d,  k0e   }, \
+    { k10,  KC_NO, k12,   k13,  k14,  k15,   k16,  k17,   k18,  k19,   k1a,  k1b,   k1c,  k1d,  k1e   }, \
+    { k20,  KC_NO, k22,   k23,  k24,  k25,   k26,  k27,   k28,  k29,   k2a,  k2b,   k2c,  k2d,  KC_NO }, \
+    { k30,  k31,   k32,   k33,  k34,  k35,   k36,  k37,   k38,  k39,   k3a,  k3b,   KC_NO,k3d,  k3e   }, \
+    { k40,  k41,   KC_NO, k43,  k44,  KC_NO, k46,  KC_NO, k48,  KC_NO, k4a,  k4b,   k4c,  k4d,  k4e   }  \
+}
+
 #endif

keyboards/dz60/info.json

@@ -60,6 +60,10 @@
     "LAYOUT_60_tsangan_hhkb": {
       "key_count": 62,
       "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Win", "x":11, "y":4, "w":1.5}, {"label":"Menu", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}]
+    },
+    "LAYOUT_60_iso_split_space_bs_rshift": {
+      "key_count": 66,
+      "layout": [{"label":"¬", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"£", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Del", "x":13, "y":0, "w":1}, {"label":"Backspace", "x":14, "y":0, "w":1}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Print screen", "x":14, "y":3, "w":1}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"label":"FN", "x":6.00, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
     }
   }
 }

keyboards/dz60/keymaps/billiams/keymap.c

@@ -12,7 +12,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |-----------------------------------------------------------------------------------------+
    * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |Tap(/) Shft|  U  | ESC |
    * |-----------------------------------------------------------------------------------------+
-   * | Ctrl |  Alt  |  Cmd  |              Space                | Cmd |  Fn  |  L  |  D  |  R  |
+   * | Ctrl |  Alt  |  Cmd  |              Space                | Alt |  Fn  |  L  |  D  |  R  |
    * `-----------------------------------------------------------------------------------------'
    */
 
@@ -21,16 +21,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
       MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
       KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, _______, RSFT_T(KC_SLSH) , KC_UP, KC_ESCAPE,
-      KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_SPC, KC_SPC, KC_RGUI, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT
+      KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT
       ),
 
   /* FN Layer
    * ,-----------------------------------------------------------------------------------------.
    * |     |  F1 |  F2 |  F3 |  F4 |  F5 |  F6 |  F7 |  F8 |  F9 | F10 | F11 | F12 |    DEL    |
    * |-----------------------------------------------------------------------------------------+
-   * |        |RBB T|RGB M| Hue-| Hue+| Sat-| Sat+| Val-| Val+|     |     | MUTE | Vol- | Vol+ |
+   * |        |RBB T|RGB M| Hue-| Hue+| Sat-| Sat+| Val-| Val+| Mute | Vol-| Vol+| Prev | Next |
    * |-----------------------------------------------------------------------------------------+
-   * |         |     |     |     |     |     |     |     |    |     | Prev | Next | Play/Pause |
+   * |         |     |     |     |     |     | Left| Down| Up |Right|      |      | Play/Pause |
    * |-----------------------------------------------------------------------------------------+
    * |           |     |     |     |     |     |     |     |Scr- |Scr+ |           |PG_UP|RESET|
    * |-----------------------------------------------------------------------------------------+
@@ -40,8 +40,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   LAYOUT_directional(
       _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10, KC_F11, KC_F12, _______, KC_DEL,
-      _______, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, _______, KC_MUTE, KC__VOLDOWN, KC__VOLUP,
-      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MRWD, KC_MFFD,
+      _______, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, KC_MUTE, KC__VOLDOWN, KC__VOLUP, KC_MRWD, KC_MFFD,
+      _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, _______, _______,
       KC_MPLY, _______, _______, _______, _______, _______, _______, _______, _______, KC_BRID, KC_BRIU, _______, _______, KC_PGUP, RESET,
       _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDOWN, KC_END
       ),

keyboards/dz60/keymaps/billiams/readme.md

@@ -10,9 +10,8 @@ Settings:
 * Del is available as `Fn` + `Backspace`
 * `/ ?` are available when you tap the right shift. Otherwise RShift is shift when held down
 * RESET is available as `Fn`+ ` ESC`
-* Underglow toggle and mode selection are available as `Fn` + `Q` and `Fn` + `S`. Yes your keyboard has lights even if you didn't get the LEDs. Bonus!
-* Media play/pause doesn't seem to work with anything but iTunes at the moment. FML
-
+* Underglow toggle is available as `Fn` + `Q`. Yes your keyboard has lights even if you didn't get the LEDs. Bonus!
+* vim-style arrow key bindings H J K L in layer 1
 
 ### Initial Installation
 
@@ -51,7 +50,7 @@ Hope this helps!
 |-----------------------------------------------------------------------------------------+
 | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  | Tap:/ RSh |  U  | ESC |
 |-----------------------------------------------------------------------------------------+
-| Ctrl |  Alt  |  Cmd  |              Space                | Cmd |  Fn  |  L  |  D  |  R  |
+| Ctrl |  Alt  |  Cmd  |              Space                | Alt |  Fn  |  L  |  D  |  R  |
 `-----------------------------------------------------------------------------------------'
 ```
 
@@ -61,9 +60,9 @@ FN Layer
 ,-----------------------------------------------------------------------------------------.
 |  `  |  F1 |  F2 |  F3 |  F4 |  F5 |  F6 |  F7 |  F8 |  F9 | F10 | F11 | F12 |    DEL    |
 |-----------------------------------------------------------------------------------------+
-|        |RBB T|RGB M| Hue-| Hue+| Sat-| Sat+| Val-| Val+|     |     | MUTE | Vol- | Vol+ |
+|        |RBB T|RGB M| Hue-| Hue+| Sat-| Sat+| Val-| Val+| Mute | Vol-| Vol+| Prev | Next |
 |-----------------------------------------------------------------------------------------+
-|         |     |     |     |     |     |     |     |     |    | Prev | Next | Play/Pause |
+|         |     |     |     |     |     | Left| Down| Up |Right|      |      | Play/Pause |
 |-----------------------------------------------------------------------------------------+
 |           |     |     |     |     |     |     |     |Scr- |Scr+ |         | PG_UP |RESET|
 |-----------------------------------------------------------------------------------------+

keyboards/dz60/keymaps/macos_arrow/keymap.c

@@ -22,7 +22,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |-----------------------------------------------------------------------------------------+
    * | Shift     | Z   | X   | C   | V   | B   | N   | M   | ,   | .   | /   |     | Up  |Shift|
    * |-----------------------------------------------------------------------------------------+
-   * | Ctrl | Alt  | Gui  |             Space / _NL            |Gui/_ML| Alt | Left| Down|Right|
+   * | Ctrl | Alt  | Gui  |                Space               |Gui/_ML| Alt | Left| Down|Right|
    * `-----------------------------------------------------------------------------------------'
    */
   [_BL] = LAYOUT_all(
@@ -30,25 +30,25 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
     LT(_FL, KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
     KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_A, KC_UP, KC_RSFT,
-    KC_LCTL, KC_LALT, KC_LGUI, KC_NO, LT(_NL, KC_SPC), KC_NO, LM(_ML, MOD_RGUI), KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT),
+    KC_LCTL, KC_LALT, KC_LGUI, KC_NO, KC_SPC, KC_NO, LM(_ML, MOD_RGUI), KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT),
 
   /* ,-----------------------------------------------------------------------------------------.
    * |     | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 |    Del    |
    * |-----------------------------------------------------------------------------------------+
-   * |        |     |     |     |     |     |     |PgUp |     |     |     |     |     |        |
+   * |        |     |     | PgUp|     |     |     |     | Up  |     |     |     |     |        |
    * |-----------------------------------------------------------------------------------------+
-   * |          |     |     |     |     |     | Left| Down|  Up |Right|     |     |            |
+   * |          |     |Home |PgDwn| End |     |     | Left| Down|Right|     |     |            |
    * |-----------------------------------------------------------------------------------------+
-   * |           |     |     |     |     |     |     |PgDwn|     |     |     |     |     |     |
+   * |           |     |     |     |     |     |     |     |     |     |     |     |     |     |
    * |-----------------------------------------------------------------------------------------+
    * |      |      |      |                                      |     |     |     |     |     |
    * `-----------------------------------------------------------------------------------------'
    */
   [_FL] = LAYOUT_all(
     _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_DEL,
-    _______, _______, _______, _______, _______, _______, _______, KC_PGUP, _______, _______, _______, _______, _______, _______,
-    _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, _______, _______, _______,
-    _______, KC_NO,  _______, _______, _______, _______, _______, _______, KC_PGDN, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, KC_PGUP, _______, _______, _______, _______, KC_UP, _______, _______, _______, _______, _______,
+    _______, _______, KC_HOME, KC_PGDN, KC_END, _______, _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, _______,
+    _______, KC_NO,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
 
   /* ,-----------------------------------------------------------------------------------------.
@@ -64,30 +64,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * `-----------------------------------------------------------------------------------------'
    */
   [_ML] = LAYOUT_all(
-    KC_MEDIA_EJECT, BR_DOWN, BR_UP, _______, _______, _______, _______, KC_MEDIA_PREV_TRACK, KC_MEDIA_PLAY_PAUSE, KC_MEDIA_NEXT_TRACK, KC_AUDIO_MUTE, KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP, KC_NO, _______,
+    KC_MEDIA_EJECT, BR_DOWN, BR_UP, BL_TOGG, RGB_TOG, _______, _______, KC_MEDIA_PREV_TRACK, KC_MEDIA_PLAY_PAUSE, KC_MEDIA_NEXT_TRACK, KC_AUDIO_MUTE, KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP, KC_NO, _______,
     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,
     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-    _______, KC_NO,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
-
-  /* ,-----------------------------------------------------------------------------------------.
-   * |     |     |     |     |     |     |     |     |  %  |  (  |  )  |  < |  > |             |
-   * |-----------------------------------------------------------------------------------------+
-   * |        |     |     |     |     |     |     |  *  |  0  |  1  |  2  |  3  |     |        |
-   * |-----------------------------------------------------------------------------------------+
-   * |          |     |     |     |     |     |     |  .  |  -  |  4  |  5  |  6  |            |
-   * |-----------------------------------------------------------------------------------------+
-   * |           |     |     |     |     |     |     |  ,  |  =  |  7  |  8  |  9  |     |     |
-   * |-----------------------------------------------------------------------------------------+
-   * |      |      |      |                                      |     |     |     |     |     |
-   * `-----------------------------------------------------------------------------------------'
-   */
-  [_NL] = LAYOUT_all(
-    _______, _______, _______, _______, _______, _______, _______, _______, KC_PERCENT, KC_LEFT_PAREN, KC_RIGHT_PAREN, KC_LEFT_ANGLE_BRACKET, KC_RIGHT_ANGLE_BRACKET, KC_NO, _______,
-    _______, _______, _______, _______, _______, _______, _______, KC_ASTERISK, KC_0, KC_1, KC_2, KC_3, _______, RESET,
-    _______, _______, _______, _______, _______, _______, _______, KC_DOT, KC_MINS, KC_4, KC_5, KC_6, _______,
-    _______, KC_NO,  _______, _______, _______, _______, _______, _______, KC_COMMA, KC_EQL, KC_7, KC_8, KC_9, _______, _______,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
+    _______, KC_NO,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_BRTG, BL_INC, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, RGB_MODE_REVERSE, BL_DEC, RGB_MODE_FORWARD),
 };
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {

keyboards/dz60/keymaps/macos_arrow/rules.mk

@@ -1,2 +1,2 @@
-BACKLIGHT_ENABLE = no
-RGBLIGHT_ENABLE = no
+BACKLIGHT_ENABLE = yes
+RGBLIGHT_ENABLE = yes

keyboards/dz60/keymaps/olligranlund_iso/keymap.c

@@ -0,0 +1,38 @@
+#include QMK_KEYBOARD_H
+
+/* ISO 60 layout by olligranlund
+*
+* This layout starts from a standard ISO 60% layout, and adds one function layer.
+* If you wish to only have one wide spacebar, you can easily do that by dismissing the "side" spacebar switches.
+*
+* Default Layer
+* ,-----------------------------------------------------------------------------------------.
+* | Esc | 1 ! | 2 " | 3 § | 4 $ | 5 % | 6 & | 7 / | 8 ( | 9 ) | 0 = | ß ? | ´ ` | Del | BSPC|
+* |-----------------------------------------------------------------------------------------|
+* | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  Ä  | + * | Enter  |
+* |----------------------------------------------------------------------------------       |
+* | FN      |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  Ö  |  Ü  | # ' |       |
+* |-----------------------------------------------------------------------------------------|
+* | Shift | < > |  Z  |  X  |  C  |  V  |  B  |  N  |  M  | , ; | . : | - _ |  Shift  |Shift|
+* |-----------------------------------------------------------------------------------------|
+* | LCtl  | LGUI  | LAlt  |  Space      | Space |  Space      | RAlt  | FN    | App  | RCtl |
+* `-----------------------------------------------------------------------------------------'
+*/
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	LAYOUT_60_iso_split_space_bs_rshift(
+		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,     KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_DEL, KC_BSPC,
+		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,     KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,
+		MO(1),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,     KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,
+		KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,     KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_PSCR,
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC,  KC_SPC,  KC_SPC,  KC_RALT, MO(1),    KC_NO,   KC_APP,   KC_RCTL),
+
+	LAYOUT_60_iso_split_space_bs_rshift(
+		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,    KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL,
+		KC_NO,   KC_MPRV, KC_MPLY, KC_MNXT, KC_NO,   KC_NO,   KC_NO,   KC_PGDOWN,KC_UP,   KC_PGUP, KC_NO,   KC_NO,   KC_NO,
+		KC_NO,   KC_VOLD, KC_MUTE, KC_VOLU, KC_NO,   KC_NO,   KC_HOME,  KC_LEFT, KC_DOWN, KC_RGHT, KC_NO,   KC_NO,   KC_NO,   KC_NO,
+		KC_LSFT, KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_END,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_RSFT, KC_CAPS,
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC,  KC_SPC,  KC_SPC,  KC_RALT, MO(1),    KC_NO,   KC_APP,  KC_RCTL),
+
+};

keyboards/dz60/keymaps/olligranlund_iso/readme.md

@@ -0,0 +1,6 @@
+# DZ60 with splitted parts
+### by Oliver Granlund
+
+![Finished product](https://i.imgur.com/HlEo5Yg.jpg)
+
+This is still under progress, but currently works on Windows as a daily driver.

keyboards/dztech/boards/GENERIC_STM32_F303XC/board.mk

@@ -1,5 +0,0 @@
-# List of all the board related files.
-BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC/board.c
-
-# Required include directories
-BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC

keyboards/dztech/dz40rgb/config.h

@@ -21,7 +21,7 @@
 
 #define DEBOUNCE 3
 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
+#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
 #define RGB_MATRIX_KEYPRESSES
 #define DISABLE_RGB_MATRIX_SPLASH
 #define DISABLE_RGB_MATRIX_MULTISPLASH

keyboards/dztech/dz40rgb/dz40rgb.c

@@ -52,7 +52,7 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
     {0, E_3,    D_3,    F_3},
     {0, E_2,    D_2,    F_2},
     {0, E_1,    D_1,    F_1},
-	
+
     {0, E_13,   D_13,   F_13},
     {0, E_14,   D_14,   F_14},
 
@@ -71,70 +71,25 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
 
 };
 
-rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
+led_config_t g_led_config = { {
+    {  11,  10,   9,   8,   7,   6,   5,   4,   3,   2,   1,   0 },
+    {  25,  24,  23,  22,  21,  20,  19,  18,  17,  16,  15,  14 },
+    {  39,  38,  37,  36,  35,  34,  33,  32,  31,  30,  29,  28 },
+    {  53,  52,  51,  50,  49,  48,  47,  46,  45,  44,  43,  42 }
+}, {
+    { 223,   0 }, { 203,   0 }, { 183,   0 }, { 162,   0 }, { 142,   0 }, { 122,   0 }, { 101,   0 }, {  81,   0 }, {  61,   0 }, {  40,   0 }, {  20,   0 }, {   0,   0 },
+    { 223,  10 }, {   0,  10 }, { 223,  21 }, { 203,  21 }, { 183,  21 }, { 162,  21 }, { 142,  21 }, { 122,  21 }, { 101,  21 }, {  81,  21 }, {  61,  21 }, {  40,  21 },
+    {  20,  21 }, {   0,  21 }, { 223,  31 }, {   0,  31 }, { 223,  42 }, { 203,  42 }, { 183,  42 }, { 162,  42 }, { 142,  42 }, { 122,  42 }, { 101,  42 }, {  81,  42 },
+    {  61,  42 }, {  40,  42 }, {  20,  42 }, {   0,  42 }, { 223,  53 }, {   0,  53 }, { 223,  63 }, { 203,  63 }, { 183,  63 }, { 162,  63 }, { 142,  63 }, { 122,  63 },
+    { 101,  63 }, {  81,  63 }, {  61,  63 }, {  40,  63 }, {  20,  63 }, {   0,  63 }
+}, {
+    1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+    1, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+    4, 1, 1, 1, 1, 4, 4, 4, 4, 4, 4, 4,
+    4, 4, 4, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+    1, 1, 1, 1, 1, 1
+} };
 
-    {{0|(11<<4)},   {20.36*11,  0}, 1},
-    {{0|(10<<4)},   {20.36*10,  0}, 1},
-    {{0|(9<<4)},    {20.36*9,  0}, 1},
-    {{0|(8<<4)},    {20.36*8,  0}, 1},
-    {{0|(7<<4)},    {20.36*7,  0}, 1},
-	{{0|(6<<4)},    { 20.36*6,  0}, 1},
-    {{0|(5<<4)},    { 20.36*5,  0}, 1},
-    {{0|(4<<4)},    { 20.36*4,  0}, 1},
-    {{0|(3<<4)},    { 20.36*3,  0}, 1},
-    {{0|(2<<4)},    { 20.36*2,  0}, 1},
-    {{0|(1<<4)},    { 20.36*1,  0}, 1},
-    {{0|(0<<4)},    { 20.36*0,  0}, 1},
-
-    {{0|(12<<4)},   {20.36*11, 21.33*0.5}, 1},
-    {{0|(13<<4)},  {20.36*0,21.33*0.5}, 1},
-
-    {{1|(11<<4)},   {20.36*11,  21.33}, 1},
-    {{1|(10<<4)},   {20.36*10,  21.33}, 4},
-    {{1|(9<<4)},    {20.36*9,  21.33}, 4},
-    {{1|(8<<4)},    {20.36*8,  21.33}, 4},
-    {{1|(7<<4)},    {20.36*7,  21.33}, 4},
-    {{1|(6<<4)},    { 20.36*6,  21.33}, 4},
-    {{1|(5<<4)},    { 20.36*5,  21.33}, 4},
-    {{1|(4<<4)},    { 20.36*4,  21.33}, 4},
-    {{1|(3<<4)},    { 20.36*3,  21.33}, 4},
-    {{1|(2<<4)},    { 20.36*2,  21.33}, 4},
-    {{1|(1<<4)},    { 20.36*1,  21.33}, 4},
-    {{1|(0<<4)},    { 20.36*0,  21.33}, 1},
-
-    {{1|(12<<4)},   {20.36*11, 21.33*1.5}, 1},
-    {{1|(13<<4)},  {20.36*0,21.33*1.5}, 1},
-
-    {{2|(11<<4)},   {20.36*11,  21.33*2}, 1},
-    {{2|(10<<4)},   {20.36*10,  21.33*2}, 4},
-    {{2|(9<<4)},    {20.36*9,  21.33*2}, 4},
-    {{2|(8<<4)},    {20.36*8,  21.33*2}, 4},
-    {{2|(7<<4)},    {20.36*7,  21.33*2}, 4},
-    {{2|(6<<4)},    { 20.36*6,  21.33*2}, 4},
-    {{2|(5<<4)},    { 20.36*5,  21.33*2}, 4},
-    {{2|(4<<4)},    { 20.36*4,  21.33*2}, 4},
-    {{2|(3<<4)},    { 20.36*3,  21.33*2}, 4},
-    {{2|(2<<4)},    { 20.36*2,  21.33*2}, 4},
-    {{2|(1<<4)},    { 20.36*1,  21.33*2}, 4},
-    {{2|(0<<4)},    { 20.36*0,  21.33*2}, 1},
-
-    {{2|(12<<4)},   {20.36*11, 21.33*2.5}, 1},
-    {{2|(13<<4)},  {20.36*0,21.33*2.5}, 1},
-
-    {{3|(11<<4)},   {20.36*11,  21.33*3}, 1},
-    {{3|(10<<4)},   {20.36*10,  21.33*3}, 1},
-    {{3|(9<<4)},    {20.36*9,  21.33*3}, 1},
-    {{3|(8<<4)},    {20.36*8,  21.33*3}, 1},
-    {{3|(7<<4)},    {20.36*7,  21.33*3}, 1},
-	{{3|(6<<4)},    { 20.36*6,  21.33*3}, 1},
-    {{3|(5<<4)},    { 20.36*5,  21.33*3}, 1},
-    {{3|(4<<4)},    { 20.36*4,  21.33*3}, 1},
-    {{3|(3<<4)},    { 20.36*3,  21.33*3}, 1},
-    {{3|(2<<4)},    { 20.36*2,  21.33*3}, 1},
-    {{3|(1<<4)},    { 20.36*1,  21.33*3}, 1},
-    {{3|(0<<4)},    { 20.36*0,  21.33*3}, 1}
-
-};
 #else
 const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
 /* Refer to IS31 manual for these locations
@@ -205,93 +160,44 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
 
 };
 
-rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
+led_config_t g_led_config = { {
+    {  11,  10,   9,   8,   7,   6,   5,   4,   3,   2,   1,   0 },
+    {  25,  24,  23,  22,  21,  20,  19,  18,  17,  16,  15,  14 },
+    {  39,  38,  37,  36,  35,  34,  33,  32,  31,  30,  29,  28 },
+    {  52,  51,  50,  49,  48, NO_LED,  47,  46,  45,  44,  43,  42 }
+}, {
+    { 223,   0 }, { 203,   0 }, { 183,   0 }, { 162,   0 }, { 142,   0 }, { 122,   0 }, { 101,   0 }, {  81,   0 }, {  61,   0 }, {  40,   0 }, {  20,   0 }, {   0,   0 },
+    { 223,  10 }, {   0,  10 }, { 223,  21 }, { 203,  21 }, { 183,  21 }, { 162,  21 }, { 142,  21 }, { 122,  21 }, { 101,  21 }, {  81,  21 }, {  61,  21 }, {  40,  21 },
+    {  20,  21 }, {   0,  21 }, { 223,  31 }, {   0,  31 }, { 223,  42 }, { 203,  42 }, { 183,  42 }, { 162,  42 }, { 142,  42 }, { 122,  42 }, { 101,  42 }, {  81,  42 },
+    {  61,  42 }, {  40,  42 }, {  20,  42 }, {   0,  42 }, { 223,  53 }, {   0,  53 }, { 223,  63 }, { 203,  63 }, { 183,  63 }, { 162,  63 }, { 142,  63 }, { 111,  63 },
+    {  81,  63 }, {  61,  63 }, {  40,  63 }, {  20,  63 }, {   0,  63 }
+}, {
+    1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+    1, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+    4, 1, 1, 1, 1, 4, 4, 4, 4, 4, 4, 4,
+    4, 4, 4, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+    1, 1, 1, 1, 1
+} };
 
-    {{0|(11<<4)},   {20.36*11,  0}, 1},
-    {{0|(10<<4)},   {20.36*10,  0}, 1},
-    {{0|(9<<4)},    {20.36*9,  0}, 1},
-    {{0|(8<<4)},    {20.36*8,  0}, 1},
-    {{0|(7<<4)},    {20.36*7,  0}, 1},
-	{{0|(6<<4)},    { 20.36*6,  0}, 1},
-    {{0|(5<<4)},    { 20.36*5,  0}, 1},
-    {{0|(4<<4)},    { 20.36*4,  0}, 1},
-    {{0|(3<<4)},    { 20.36*3,  0}, 1},
-    {{0|(2<<4)},    { 20.36*2,  0}, 1},
-    {{0|(1<<4)},    { 20.36*1,  0}, 1},
-    {{0|(0<<4)},    { 20.36*0,  0}, 1},
-
-    {{0|(12<<4)},   {20.36*11, 21.33*0.5}, 1},
-    {{0|(13<<4)},  {20.36*0,21.33*0.5}, 1},
-
-    {{1|(11<<4)},   {20.36*11,  21.33}, 1},
-    {{1|(10<<4)},   {20.36*10,  21.33}, 4},
-    {{1|(9<<4)},    {20.36*9,  21.33}, 4},
-    {{1|(8<<4)},    {20.36*8,  21.33}, 4},
-    {{1|(7<<4)},    {20.36*7,  21.33}, 4},
-    {{1|(6<<4)},    { 20.36*6,  21.33}, 4},
-    {{1|(5<<4)},    { 20.36*5,  21.33}, 4},
-    {{1|(4<<4)},    { 20.36*4,  21.33}, 4},
-    {{1|(3<<4)},    { 20.36*3,  21.33}, 4},
-    {{1|(2<<4)},    { 20.36*2,  21.33}, 4},
-    {{1|(1<<4)},    { 20.36*1,  21.33}, 4},
-    {{1|(0<<4)},    { 20.36*0,  21.33}, 1},
-
-    {{1|(12<<4)},   {20.36*11, 21.33*1.5}, 1},
-    {{1|(13<<4)},  {20.36*0,21.33*1.5}, 1},
-
-    {{2|(11<<4)},   {20.36*11,  21.33*2}, 1},
-    {{2|(10<<4)},   {20.36*10,  21.33*2}, 4},
-    {{2|(9<<4)},    {20.36*9,  21.33*2}, 4},
-    {{2|(8<<4)},    {20.36*8,  21.33*2}, 4},
-    {{2|(7<<4)},    {20.36*7,  21.33*2}, 4},
-    {{2|(6<<4)},    { 20.36*6,  21.33*2}, 4},
-    {{2|(5<<4)},    { 20.36*5,  21.33*2}, 4},
-    {{2|(4<<4)},    { 20.36*4,  21.33*2}, 4},
-    {{2|(3<<4)},    { 20.36*3,  21.33*2}, 4},
-    {{2|(2<<4)},    { 20.36*2,  21.33*2}, 4},
-    {{2|(1<<4)},    { 20.36*1,  21.33*2}, 4},
-    {{2|(0<<4)},    { 20.36*0,  21.33*2}, 1},
-
-    {{2|(12<<4)},   {20.36*11, 21.33*2.5}, 1},
-    {{2|(13<<4)},  {20.36*0,21.33*2.5}, 1},
-
-    {{3|(11<<4)},   {20.36*11,  21.33*3}, 1},
-    {{3|(10<<4)},   {20.36*10,  21.33*3}, 1},
-    {{3|(9<<4)},    {20.36*9,  21.33*3}, 1},
-    {{3|(8<<4)},    {20.36*8,  21.33*3}, 1},
-    {{3|(7<<4)},    {20.36*7,  21.33*3}, 1},
-	{{3|(6<<4)},    { 20.36*5.5,  21.33*3}, 1},
-    {{3|(4<<4)},    { 20.36*4,  21.33*3}, 1},
-    {{3|(3<<4)},    { 20.36*3,  21.33*3}, 1},
-    {{3|(2<<4)},    { 20.36*2,  21.33*3}, 1},
-    {{3|(1<<4)},    { 20.36*1,  21.33*3}, 1},
-    {{3|(0<<4)},    { 20.36*0,  21.33*3}, 1}
-
-};
 #endif
 
-
 void matrix_init_kb(void) {
     matrix_init_user();
 }
-
-
 void matrix_scan_kb(void) {
     matrix_scan_user();
 }
-
-
 bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
     return process_record_user(keycode, record);
 }
-
-
 void suspend_power_down_kb(void)
 {
     rgb_matrix_set_suspend_state(true);
+    suspend_power_down_user();
 }
 
 void suspend_wakeup_init_kb(void)
 {
     rgb_matrix_set_suspend_state(false);
+    suspend_wakeup_init_user();
 }

keyboards/dztech/dz40rgb/keymaps/default/keymap.c

@@ -1,5 +1,4 @@
 #include QMK_KEYBOARD_H
-extern bool g_suspend_state;
 #define _LAYER0 0
 #define _LAYER1 1
 #define _LAYER2 2
@@ -31,11 +30,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 			),
 
 };
+
 void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) {
-  rgb_led led;
   for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
-    led = g_rgb_leds[i];
-    if (HAS_FLAGS(led.flags, LED_FLAG_MODIFIER)) {
+    if (HAS_FLAGS(g_led_config.flags[i], LED_FLAG_MODIFIER)) {
         rgb_matrix_set_color( i, red, green, blue );
     }
   }

keyboards/dztech/dz40rgb/keymaps/split_space/keymap.c

@@ -1,5 +1,4 @@
 #include QMK_KEYBOARD_H
-extern bool g_suspend_state;
 #define _LAYER0 0
 #define _LAYER1 1
 #define _LAYER2 2
@@ -53,12 +52,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 
 
-
 void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) {
-  rgb_led led;
   for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
-    led = g_rgb_leds[i];
-    if (HAS_FLAGS(led.flags, LED_FLAG_MODIFIER)) {
+    if (HAS_FLAGS(g_led_config.flags[i], LED_FLAG_MODIFIER)) {
         rgb_matrix_set_color( i, red, green, blue );
     }
   }

keyboards/dztech/dz40rgb/rules.mk

@@ -1,50 +1,6 @@
-# project specific files
-
-## chip/board settings
-#   the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F3xx
-
-# Linker script to use
-#   it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F303xC
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f3xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = GENERIC_STM32_F303XC
-
-# Cortex version
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-
-USE_FPU = yes
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
-OPT_DEFS =
-
-# Do not put the microcontroller into power saving mode
-# when we get USB suspend event. We want it to keep updating
-# backlight effects.
-OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
-
-# Options to pass to dfu-util when flashing
+MCU  = STM32F303
 DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
 DFU_SUFFIX_ARGS = -p DF11 -v 0483
-
-# Build Options
-#   comment out to disable the options.
-#
 BACKLIGHT_ENABLE = no
 BOOTMAGIC_ENABLE = lite            # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes              # Mouse keys

keyboards/dztech/dz60rgb/config.h

@@ -32,5 +32,11 @@
 #define DRIVER_ADDR_1 0b1010000
 #define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons.
 #define DRIVER_COUNT 2
+#if defined (dzrgb60_ansi) || defined (dzrgb60_iso)
+#define DRIVER_1_LED_TOTAL 61
+#elif defined (dzrgb60_hhkb) || defined (dzrgb60_hhkb_iso)
+#define DRIVER_1_LED_TOTAL 62
+#else
 #define DRIVER_1_LED_TOTAL 63
+#endif
 #define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL

keyboards/dztech/dz60rgb/dz60rgb.c

@@ -65,69 +65,26 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
     {0, K_16,   J_16,   L_16},
 };
 
-rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
-    {{0|(13<<4)},   {16*13.5,  0}, 1},
-    {{0|(12<<4)},   {16*12,  0}, 1},
-    {{0|(11<<4)},   {16*11,  0}, 1},
-    {{0|(10<<4)},   {16*10,  0}, 1},
-    {{0|(9<<4)},    {16*9,  0}, 1},
-    {{0|(8<<4)},    {16*8,  0}, 1},
-    {{0|(7<<4)},    {16*7,  0}, 1},
-	{{0|(6<<4)},    {16*6,  0}, 1},
-    {{0|(5<<4)},    {16*5,  0}, 1},
-    {{0|(4<<4)},    {16*4,  0}, 1},
-    {{0|(3<<4)},    {16*3,  0}, 1},
-    {{0|(2<<4)},    {16*2,  0}, 1},
-    {{0|(1<<4)},    {16*1,  0}, 1},
-    {{0|(0<<4)},    {16*0,  0}, 1},
-	{{2|(13<<4)},   {16*13.75, 24}, 1},
-    {{1|(12<<4)},   {16*12.5,  16}, 4},
-    {{1|(11<<4)},   {16*11.5,  16}, 4},
-    {{1|(10<<4)},   {16*10.5,  16}, 4},
-    {{1|(9<<4)},    { 16*9.5,  16}, 4},
-    {{1|(8<<4)},    { 16*8.5,  16}, 4},
-    {{1|(7<<4)},    { 16*7.5,  16}, 4},
-	{{1|(6<<4)},    { 16*6.5,  16}, 4},
-    {{1|(5<<4)},    { 16*5.5,  16}, 4},
-    {{1|(4<<4)},    { 16*4.5,  16}, 4},
-    {{1|(3<<4)},    { 16*3.5,  16}, 4},
-    {{1|(2<<4)},    { 16*2.5,  16}, 4},
-    {{1|(1<<4)},    { 16*1.5,  16}, 4},
-    {{1|(0<<4)},    { 16*0.25,  16}, 1},
-	{{1|(13<<4)},   {16*12.75,  32}, 1},
-    {{2|(11<<4)},   {16*11.75,  32}, 4},
-    {{2|(10<<4)},   {16*10.75,  32}, 4},
-    {{2|(9<<4)},    {16*9.75,  32}, 4},
-    {{2|(8<<4)},    {16*8.75,  32}, 4},
-    {{2|(7<<4)},    {16*7.75,  32}, 4},
-	{{2|(6<<4)},    { 16*6.75,  32}, 4},
-    {{2|(5<<4)},    { 16*5.75,  32}, 4},
-    {{2|(4<<4)},    { 16*4.75,  32}, 4},
-    {{2|(3<<4)},    { 16*3.75,  32}, 4},
-    {{2|(2<<4)},    { 16*2.75,  32}, 4},
-    {{2|(1<<4)},    { 16*1.75,  32}, 4},
-    {{2|(0<<4)},    { 16*0.375,  32}, 1},
-    {{3|(11<<4)},   {16*13.125,  48}, 1},
-    {{3|(10<<4)},   {16*11.25,  48}, 4},
-    {{3|(9<<4)},    {16*10.25,  48}, 4},
-    {{3|(8<<4)},    {16*9.25,  48}, 4},
-    {{3|(7<<4)},    {16*8.25,  48}, 4},
-	{{3|(6<<4)},    {16*7.25,  48}, 4},
-    {{3|(5<<4)},    {16*6.25,  48}, 4},
-    {{3|(4<<4)},    {16*5.25,  48}, 4},
-    {{3|(3<<4)},    {16*4.25,  48}, 4},
-    {{3|(2<<4)},    {16*3.25,  48}, 4},
-    {{3|(1<<4)},    {16*1.25,  48}, 4},
-    {{3|(0<<4)},    {16*0.625,  48}, 1},
-	{{4|(13<<4)},   {16*13.875,  64}, 1},
-    {{4|(11<<4)},   {16*12.625,  64}, 1},
-    {{4|(10<<4)},   {16*11.375,  64}, 1},
-    {{4|(9<<4)},    {16*10.125,  64}, 1},
-    {{4|(5<<4)},    { 16*6.375,  64}, 4},
-    {{4|(2<<4)},    { 16*2.625,  64}, 1},
-    {{4|(1<<4)},    { 16*1.375,  64}, 1},
-    {{4|(0<<4)},    { 16*0.125,  64}, 1},
-};
+led_config_t g_led_config = { {
+    {  13,  12,  11,  10,   9,   8,   7,   6,   5,   4,   3,   2,   1,   0 },
+    {  27,  26,  25,  24,  23,  22,  21,  20,  19,  18,  17,  16,  15,  28 },
+    {  40,  39,  38,  37,  36,  35,  34,  33,  32,  31,  30,  29, NO_LED,  14 },
+    {  52,  51,  50,  49,  48,  47,  46,  45,  44,  43,  42,  41, NO_LED, NO_LED },
+    {  60,  59,  58, NO_LED, NO_LED,  57, NO_LED, NO_LED, NO_LED,  56,  55,  54, NO_LED,  53 }
+}, {
+    { 216,   0 }, { 192,   0 }, { 176,   0 }, { 160,   0 }, { 144,   0 }, { 128,   0 }, { 112,   0 }, {  96,   0 }, {  80,   0 }, {  64,   0 }, {  48,   0 }, {  32,   0 }, {  16,   0 }, {   0,   0 },
+    { 220,  24 }, { 200,  16 }, { 184,  16 }, { 168,  16 }, { 152,  16 }, { 136,  16 }, { 120,  16 }, { 104,  16 }, {  88,  16 }, {  72,  16 }, {  56,  16 }, {  40,  16 }, {  24,  16 }, {   4,  16 },
+    { 204,  32 }, { 188,  32 }, { 172,  32 }, { 156,  32 }, { 140,  32 }, { 124,  32 }, { 108,  32 }, {  92,  32 }, {  76,  32 }, {  60,  32 }, {  44,  32 }, {  28,  32 }, {   6,  32 }, { 210,  48 },
+    { 180,  48 }, { 164,  48 }, { 148,  48 }, { 132,  48 }, { 116,  48 }, { 100,  48 }, {  84,  48 }, {  68,  48 }, {  52,  48 }, {  20,  48 }, {  10,  48 }, { 222,  64 }, { 202,  64 }, { 182,  64 },
+    { 162,  64 }, { 102,  64 }, {  42,  64 }, {  22,  64 }, {   2,  64 }
+}, {
+    1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1,
+    4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1, 1,
+    1, 4, 1, 1, 1
+} };
+
 #elif defined (dzrgb60_hhkb)
 const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
 	{0, H_15,   G_15,   I_15},
@@ -194,70 +151,26 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
     {0, K_16,   J_16,   L_16},
 };
 
-rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
-	{{2|(12<<4)},   {16*14,  0}, 1},
-    {{0|(13<<4)},   {16*13,  0}, 1},
-    {{0|(12<<4)},   {16*12,  0}, 1},
-    {{0|(11<<4)},   {16*11,  0}, 1},
-    {{0|(10<<4)},   {16*10,  0}, 1},
-    {{0|(9<<4)},    {16*9,  0}, 1},
-    {{0|(8<<4)},    {16*8,  0}, 1},
-    {{0|(7<<4)},    {16*7,  0}, 1},
-	{{0|(6<<4)},    {16*6,  0}, 1},
-    {{0|(5<<4)},    {16*5,  0}, 1},
-    {{0|(4<<4)},    {16*4,  0}, 1},
-    {{0|(3<<4)},    {16*3,  0}, 1},
-    {{0|(2<<4)},    {16*2,  0}, 1},
-    {{0|(1<<4)},    {16*1,  0}, 1},
-    {{0|(0<<4)},    {16*0,  0}, 1},
-	{{1|(13<<4)},   {16*13.75, 16}, 1},
-    {{1|(12<<4)},   {16*12.5,  16}, 4},
-    {{1|(11<<4)},   {16*11.5,  16}, 4},
-    {{1|(10<<4)},   {16*10.5,  16}, 4},
-    {{1|(9<<4)},    { 16*9.5,  16}, 4},
-    {{1|(8<<4)},    { 16*8.5,  16}, 4},
-    {{1|(7<<4)},    { 16*7.5,  16}, 4},
-	{{1|(6<<4)},    { 16*6.5,  16}, 4},
-    {{1|(5<<4)},    { 16*5.5,  16}, 4},
-    {{1|(4<<4)},    { 16*4.5,  16}, 4},
-    {{1|(3<<4)},    { 16*3.5,  16}, 4},
-    {{1|(2<<4)},    { 16*2.5,  16}, 4},
-    {{1|(1<<4)},    { 16*1.5,  16}, 4},
-    {{1|(0<<4)},    { 16*0.25,  16}, 1},
-	{{2|(13<<4)},   {16*12.75,  32}, 1},
-    {{2|(11<<4)},   {16*11.75,  32}, 4},
-    {{2|(10<<4)},   {16*10.75,  32}, 4},
-    {{2|(9<<4)},    {16*9.75,  32}, 4},
-    {{2|(8<<4)},    {16*8.75,  32}, 4},
-    {{2|(7<<4)},    {16*7.75,  32}, 4},
-	{{2|(6<<4)},    { 16*6.75,  32}, 4},
-    {{2|(5<<4)},    { 16*5.75,  32}, 4},
-    {{2|(4<<4)},    { 16*4.75,  32}, 4},
-    {{2|(3<<4)},    { 16*3.75,  32}, 4},
-    {{2|(2<<4)},    { 16*2.75,  32}, 4},
-    {{2|(1<<4)},    { 16*1.75,  32}, 4},
-    {{2|(0<<4)},    { 16*0.375,  32}, 1},
-    {{3|(13<<4)},   {16*14,     48}, 1},
-    {{3|(11<<4)},   {16*12.625, 48}, 4},
-    {{3|(10<<4)},   {16*11.25,  48}, 4},
-    {{3|(9<<4)},    {16*10.25,  48}, 4},
-    {{3|(8<<4)},    {16*9.25,  48}, 4},
-    {{3|(7<<4)},    {16*8.25,  48}, 4},
-	{{3|(6<<4)},    {16*7.25,  48}, 4},
-    {{3|(5<<4)},    {16*6.25,  48}, 4},
-    {{3|(4<<4)},    {16*5.25,  48}, 4},
-    {{3|(3<<4)},    {16*4.25,  48}, 4},
-    {{3|(2<<4)},    {16*3.25,  48}, 4},
-    {{3|(1<<4)},    {16*1.25,  48}, 4},
-    {{3|(0<<4)},    {16*0.625,  48}, 1},
-	{{4|(13<<4)},   {16*13.625,  64}, 1},
-    {{4|(11<<4)},   {16*12.375,  64}, 1},
-    {{4|(10<<4)},   {16*11.125,  64}, 1},
-    {{4|(5<<4)},    { 16*7,      64}, 4},
-    {{4|(2<<4)},    { 16*2.875,  64}, 1},
-    {{4|(1<<4)},    { 16*1.625,  64}, 1},
-    {{4|(0<<4)},    { 16*0.375,  64}, 1},
-};
+led_config_t g_led_config = { {
+    {  14,  13,  12,  11,  10,   9,   8,   7,   6,   5,   4,   3,   2,   1 },
+    {  28,  27,  26,  25,  24,  23,  22,  21,  20,  19,  18,  17,  16,  15 },
+    {  41,  40,  39,  38,  37,  36,  35,  34,  33,  32,  31,  30,   0,  29 },
+    {  54,  53,  52,  51,  50,  49,  48,  47,  46,  45,  44,  43, NO_LED,  42 },
+    {  61,  60,  59, NO_LED, NO_LED,  58, NO_LED, NO_LED, NO_LED, NO_LED,  57,  56, NO_LED,  55 }
+}, {
+    { 224,   0 }, { 208,   0 }, { 192,   0 }, { 176,   0 }, { 160,   0 }, { 144,   0 }, { 128,   0 }, { 112,   0 }, {  96,   0 }, {  80,   0 }, {  64,   0 }, {  48,   0 }, {  32,   0 }, {  16,   0 },
+    {   0,   0 }, { 220,  16 }, { 200,  16 }, { 184,  16 }, { 168,  16 }, { 152,  16 }, { 136,  16 }, { 120,  16 }, { 104,  16 }, {  88,  16 }, {  72,  16 }, {  56,  16 }, {  40,  16 }, {  24,  16 },
+    {   4,  16 }, { 204,  32 }, { 188,  32 }, { 172,  32 }, { 156,  32 }, { 140,  32 }, { 124,  32 }, { 108,  32 }, {  92,  32 }, {  76,  32 }, {  60,  32 }, {  44,  32 }, {  28,  32 }, {   6,  32 },
+    { 224,  48 }, { 202,  48 }, { 180,  48 }, { 164,  48 }, { 148,  48 }, { 132,  48 }, { 116,  48 }, { 100,  48 }, {  84,  48 }, {  68,  48 }, {  52,  48 }, {  20,  48 }, {  10,  48 }, { 218,  64 },
+    { 198,  64 }, { 178,  64 }, { 112,  64 }, {  46,  64 }, {  26,  64 }, {   6,  64 }
+}, {
+    1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+    1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+    1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1,
+    1, 1, 4, 1, 1, 1
+} };
+
 #elif defined (dzrgb60_hhkb_iso)
 const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
 	{0, H_15,   G_15,   I_15},
@@ -324,70 +237,26 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
     {0, K_16,   J_16,   L_16},
 };
 
-rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
-	{{2|(12<<4)},   {16*14,  0}, 1},
-    {{0|(13<<4)},   {16*13,  0}, 1},
-    {{0|(12<<4)},   {16*12,  0}, 1},
-    {{0|(11<<4)},   {16*11,  0}, 1},
-    {{0|(10<<4)},   {16*10,  0}, 1},
-    {{0|(9<<4)},    {16*9,  0}, 1},
-    {{0|(8<<4)},    {16*8,  0}, 1},
-    {{0|(7<<4)},    {16*7,  0}, 1},
-	{{0|(6<<4)},    {16*6,  0}, 1},
-    {{0|(5<<4)},    {16*5,  0}, 1},
-    {{0|(4<<4)},    {16*4,  0}, 1},
-    {{0|(3<<4)},    {16*3,  0}, 1},
-    {{0|(2<<4)},    {16*2,  0}, 1},
-    {{0|(1<<4)},    {16*1,  0}, 1},
-    {{0|(0<<4)},    {16*0,  0}, 1},
-	{{2|(13<<4)},   {16*13.75, 24}, 1},
-    {{1|(12<<4)},   {16*12.5,  16}, 4},
-    {{1|(11<<4)},   {16*11.5,  16}, 4},
-    {{1|(10<<4)},   {16*10.5,  16}, 4},
-    {{1|(9<<4)},    { 16*9.5,  16}, 4},
-    {{1|(8<<4)},    { 16*8.5,  16}, 4},
-    {{1|(7<<4)},    { 16*7.5,  16}, 4},
-	{{1|(6<<4)},    { 16*6.5,  16}, 4},
-    {{1|(5<<4)},    { 16*5.5,  16}, 4},
-    {{1|(4<<4)},    { 16*4.5,  16}, 4},
-    {{1|(3<<4)},    { 16*3.5,  16}, 4},
-    {{1|(2<<4)},    { 16*2.5,  16}, 4},
-    {{1|(1<<4)},    { 16*1.5,  16}, 4},
-    {{1|(0<<4)},    { 16*0.25,  16}, 1},
-	{{1|(13<<4)},   {16*12.75,  32}, 1},
-    {{2|(11<<4)},   {16*11.75,  32}, 4},
-    {{2|(10<<4)},   {16*10.75,  32}, 4},
-    {{2|(9<<4)},    {16*9.75,  32}, 4},
-    {{2|(8<<4)},    {16*8.75,  32}, 4},
-    {{2|(7<<4)},    {16*7.75,  32}, 4},
-	{{2|(6<<4)},    { 16*6.75,  32}, 4},
-    {{2|(5<<4)},    { 16*5.75,  32}, 4},
-    {{2|(4<<4)},    { 16*4.75,  32}, 4},
-    {{2|(3<<4)},    { 16*3.75,  32}, 4},
-    {{2|(2<<4)},    { 16*2.75,  32}, 4},
-    {{2|(1<<4)},    { 16*1.75,  32}, 4},
-    {{2|(0<<4)},    { 16*0.375,  32}, 1},
-    {{3|(13<<4)},   {16*14,     48}, 1},
-    {{3|(11<<4)},   {16*12.625, 48}, 4},
-    {{3|(10<<4)},   {16*11.25,  48}, 4},
-    {{3|(9<<4)},    {16*10.25,  48}, 4},
-    {{3|(8<<4)},    {16*9.25,  48}, 4},
-    {{3|(7<<4)},    {16*8.25,  48}, 4},
-	{{3|(6<<4)},    {16*7.25,  48}, 4},
-    {{3|(5<<4)},    {16*6.25,  48}, 4},
-    {{3|(4<<4)},    {16*5.25,  48}, 4},
-    {{3|(3<<4)},    {16*4.25,  48}, 4},
-    {{3|(2<<4)},    {16*3.25,  48}, 4},
-    {{3|(1<<4)},    {16*1.25,  48}, 4},
-    {{3|(0<<4)},    {16*0.625,  48}, 1},
-	{{4|(13<<4)},   {16*13.625,  64}, 1},
-    {{4|(11<<4)},   {16*12.375,  64}, 1},
-    {{4|(10<<4)},   {16*11.125,  64}, 1},
-    {{4|(5<<4)},    { 16*7,      64}, 4},
-    {{4|(2<<4)},    { 16*2.875,  64}, 1},
-    {{4|(1<<4)},    { 16*1.625,  64}, 1},
-    {{4|(0<<4)},    { 16*0.375,  64}, 1},
-};
+led_config_t g_led_config = { {
+    {  14,  13,  12,  11,  10,   9,   8,   7,   6,   5,   4,   3,   2,   1 },
+    {  28,  27,  26,  25,  24,  23,  22,  21,  20,  19,  18,  17,  16,  29 },
+    {  41,  40,  39,  38,  37,  36,  35,  34,  33,  32,  31,  30,   0,  15 },
+    {  54,  53,  52,  51,  50,  49,  48,  47,  46,  45,  44,  43, NO_LED,  42 },
+    {  61,  60,  59, NO_LED, NO_LED,  58, NO_LED, NO_LED, NO_LED, NO_LED,  57,  56, NO_LED,  55 }
+}, {
+    { 224,   0 }, { 208,   0 }, { 192,   0 }, { 176,   0 }, { 160,   0 }, { 144,   0 }, { 128,   0 }, { 112,   0 }, {  96,   0 }, {  80,   0 }, {  64,   0 }, {  48,   0 }, {  32,   0 }, {  16,   0 },
+    {   0,   0 }, { 220,  24 }, { 200,  16 }, { 184,  16 }, { 168,  16 }, { 152,  16 }, { 136,  16 }, { 120,  16 }, { 104,  16 }, {  88,  16 }, {  72,  16 }, {  56,  16 }, {  40,  16 }, {  24,  16 },
+    {   4,  16 }, { 204,  32 }, { 188,  32 }, { 172,  32 }, { 156,  32 }, { 140,  32 }, { 124,  32 }, { 108,  32 }, {  92,  32 }, {  76,  32 }, {  60,  32 }, {  44,  32 }, {  28,  32 }, {   6,  32 },
+    { 224,  48 }, { 202,  48 }, { 180,  48 }, { 164,  48 }, { 148,  48 }, { 132,  48 }, { 116,  48 }, { 100,  48 }, {  84,  48 }, {  68,  48 }, {  52,  48 }, {  20,  48 }, {  10,  48 }, { 218,  64 },
+    { 198,  64 }, { 178,  64 }, { 112,  64 }, {  46,  64 }, {  26,  64 }, {   6,  64 }
+}, {
+    1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+    1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+    1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1,
+    1, 1, 4, 1, 1, 1
+} };
+
 #elif defined (dzrgb60_ansi)
 const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
     {0, K_14,   J_14,   L_14},
@@ -453,69 +322,26 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
     {0, K_16,   J_16,   L_16},
 };
 
-rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
-    {{0|(13<<4)},   {16*13.5,  0}, 1},
-    {{0|(12<<4)},   {16*12,  0}, 1},
-    {{0|(11<<4)},   {16*11,  0}, 1},
-    {{0|(10<<4)},   {16*10,  0}, 1},
-    {{0|(9<<4)},    {16*9,  0}, 1},
-    {{0|(8<<4)},    {16*8,  0}, 1},
-    {{0|(7<<4)},    {16*7,  0}, 1},
-	{{0|(6<<4)},    {16*6,  0}, 1},
-    {{0|(5<<4)},    {16*5,  0}, 1},
-    {{0|(4<<4)},    {16*4,  0}, 1},
-    {{0|(3<<4)},    {16*3,  0}, 1},
-    {{0|(2<<4)},    {16*2,  0}, 1},
-    {{0|(1<<4)},    {16*1,  0}, 1},
-    {{0|(0<<4)},    {16*0,  0}, 1},
-	{{1|(13<<4)},   {16*13.75, 16}, 1},
-    {{1|(12<<4)},   {16*12.5,  16}, 4},
-    {{1|(11<<4)},   {16*11.5,  16}, 4},
-    {{1|(10<<4)},   {16*10.5,  16}, 4},
-    {{1|(9<<4)},    { 16*9.5,  16}, 4},
-    {{1|(8<<4)},    { 16*8.5,  16}, 4},
-    {{1|(7<<4)},    { 16*7.5,  16}, 4},
-	{{1|(6<<4)},    { 16*6.5,  16}, 4},
-    {{1|(5<<4)},    { 16*5.5,  16}, 4},
-    {{1|(4<<4)},    { 16*4.5,  16}, 4},
-    {{1|(3<<4)},    { 16*3.5,  16}, 4},
-    {{1|(2<<4)},    { 16*2.5,  16}, 4},
-    {{1|(1<<4)},    { 16*1.5,  16}, 4},
-    {{1|(0<<4)},    { 16*0.25,  16}, 1},
-	{{2|(13<<4)},   {16*13.375,  24}, 1},
-    {{2|(11<<4)},   {16*11.75,  32}, 4},
-    {{2|(10<<4)},   {16*10.75,  32}, 4},
-    {{2|(9<<4)},    {16*9.75,  32}, 4},
-    {{2|(8<<4)},    {16*8.75,  32}, 4},
-    {{2|(7<<4)},    {16*7.75,  32}, 4},
-	{{2|(6<<4)},    { 16*6.75,  32}, 4},
-    {{2|(5<<4)},    { 16*5.75,  32}, 4},
-    {{2|(4<<4)},    { 16*4.75,  32}, 4},
-    {{2|(3<<4)},    { 16*3.75,  32}, 4},
-    {{2|(2<<4)},    { 16*2.75,  32}, 4},
-    {{2|(1<<4)},    { 16*1.75,  32}, 4},
-    {{2|(0<<4)},    { 16*0.375,  32}, 1},
-    {{3|(11<<4)},   {16*13.125,  48}, 1},
-    {{3|(10<<4)},   {16*11.25,  48}, 4},
-    {{3|(9<<4)},    {16*10.25,  48}, 4},
-    {{3|(8<<4)},    {16*9.25,  48}, 4},
-    {{3|(7<<4)},    {16*8.25,  48}, 4},
-	{{3|(6<<4)},    {16*7.25,  48}, 4},
-    {{3|(5<<4)},    {16*6.25,  48}, 4},
-    {{3|(4<<4)},    {16*5.25,  48}, 4},
-    {{3|(3<<4)},    {16*4.25,  48}, 4},
-    {{3|(2<<4)},    {16*3.25,  48}, 4},
-    {{3|(1<<4)},    {16*1.25,  48}, 4},
-    {{3|(0<<4)},    {16*0.625,  48}, 1},
-	{{4|(13<<4)},   {16*13.875,  64}, 1},
-    {{4|(11<<4)},   {16*12.625,  64}, 1},
-    {{4|(10<<4)},   {16*11.375,  64}, 1},
-    {{4|(9<<4)},    {16*10.125,  64}, 1},
-    {{4|(5<<4)},    { 16*6.375,  64}, 4},
-    {{4|(2<<4)},    { 16*2.625,  64}, 1},
-    {{4|(1<<4)},    { 16*1.375,  64}, 1},
-    {{4|(0<<4)},    { 16*0.125,  64}, 1},
-};
+led_config_t g_led_config = { {
+    {  13,  12,  11,  10,   9,   8,   7,   6,   5,   4,   3,   2,   1,   0 },
+    {  27,  26,  25,  24,  23,  22,  21,  20,  19,  18,  17,  16,  15,  14 },
+    {  40,  39,  38,  37,  36,  35,  34,  33,  32,  31,  30,  29, NO_LED,  28 },
+    {  52,  51,  50,  49,  48,  47,  46,  45,  44,  43,  42,  41, NO_LED, NO_LED },
+    {  60,  59,  58, NO_LED, NO_LED,  57, NO_LED, NO_LED, NO_LED,  56,  55,  54, NO_LED,  53 }
+}, {
+    { 216,   0 }, { 192,   0 }, { 176,   0 }, { 160,   0 }, { 144,   0 }, { 128,   0 }, { 112,   0 }, {  96,   0 }, {  80,   0 }, {  64,   0 }, {  48,   0 }, {  32,   0 }, {  16,   0 }, {   0,   0 },
+    { 220,  16 }, { 200,  16 }, { 184,  16 }, { 168,  16 }, { 152,  16 }, { 136,  16 }, { 120,  16 }, { 104,  16 }, {  88,  16 }, {  72,  16 }, {  56,  16 }, {  40,  16 }, {  24,  16 }, {   4,  16 },
+    { 214,  24 }, { 188,  32 }, { 172,  32 }, { 156,  32 }, { 140,  32 }, { 124,  32 }, { 108,  32 }, {  92,  32 }, {  76,  32 }, {  60,  32 }, {  44,  32 }, {  28,  32 }, {   6,  32 }, { 210,  48 },
+    { 180,  48 }, { 164,  48 }, { 148,  48 }, { 132,  48 }, { 116,  48 }, { 100,  48 }, {  84,  48 }, {  68,  48 }, {  52,  48 }, {  20,  48 }, {  10,  48 }, { 222,  64 }, { 202,  64 }, { 182,  64 },
+    { 162,  64 }, { 102,  64 }, {  42,  64 }, {  22,  64 }, {   2,  64 }
+}, {
+    1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1,
+    4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1, 1,
+    1, 4, 1, 1, 1
+} };
+
 #else
 const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
     {0, K_14,   J_14,   L_14},
@@ -583,71 +409,26 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
     {0, K_16,   J_16,   L_16},
 };
 
-rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
-    {{0|(13<<4)},   {17.23*13,  0}, 1},
-    {{0|(12<<4)},   {17.23*12,  0}, 1},
-    {{0|(11<<4)},   {17.23*11,  0}, 1},
-    {{0|(10<<4)},   {17.23*10,  0}, 1},
-    {{0|(9<<4)},    {17.23*9,  0}, 1},
-    {{0|(8<<4)},    {17.23*8,  0}, 1},
-    {{0|(7<<4)},    {17.23*7,  0}, 1},
-	{{0|(6<<4)},    { 17.23*6,  0}, 1},
-    {{0|(5<<4)},    { 17.23*5,  0}, 1},
-    {{0|(4<<4)},    { 17.23*4,  0}, 1},
-    {{0|(3<<4)},    { 17.23*3,  0}, 1},
-    {{0|(2<<4)},    { 17.23*2,  0}, 1},
-    {{0|(1<<4)},    { 17.23*1,  0}, 1},
-    {{0|(0<<4)},    { 17.23*0,  0}, 1},
-	{{1|(13<<4)},   {17.23*13,  16}, 1},
-    {{1|(12<<4)},   {17.23*12,  16}, 4},
-    {{1|(11<<4)},   {17.23*11,  16}, 4},
-    {{1|(10<<4)},   {17.23*10,  16}, 4},
-    {{1|(9<<4)},    {17.23*9,  16}, 4},
-    {{1|(8<<4)},    {17.23*8,  16}, 4},
-    {{1|(7<<4)},    {17.23*7,  16}, 4},
-	{{1|(6<<4)},    { 17.23*6,  16}, 4},
-    {{1|(5<<4)},    { 17.23*5,  16}, 4},
-    {{1|(4<<4)},    { 17.23*4,  16}, 4},
-    {{1|(3<<4)},    { 17.23*3,  16}, 4},
-    {{1|(2<<4)},    { 17.23*2,  16}, 4},
-    {{1|(1<<4)},    { 17.23*1,  16}, 4},
-    {{1|(0<<4)},    { 17.23*0,  16}, 1},
-	{{2|(13<<4)},   {17.23*13,  32}, 1},
-    {{2|(11<<4)},   {17.23*11,  32}, 4},
-    {{2|(10<<4)},   {17.23*10,  32}, 4},
-    {{2|(9<<4)},    {17.23*9,  32}, 4},
-    {{2|(8<<4)},    {17.23*8,  32}, 4},
-    {{2|(7<<4)},    {17.23*7,  32}, 4},
-	{{2|(6<<4)},    { 17.23*6,  32}, 4},
-    {{2|(5<<4)},    { 17.23*5,  32}, 4},
-    {{2|(4<<4)},    { 17.23*4,  32}, 4},
-    {{2|(3<<4)},    { 17.23*3,  32}, 4},
-    {{2|(2<<4)},    { 17.23*2,  32}, 4},
-    {{2|(1<<4)},    { 17.23*1,  32}, 4},
-    {{2|(0<<4)},    { 17.23*0,  32}, 1},
-	{{3|(13<<4)},   {17.23*13,  48}, 1},
-    {{3|(11<<4)},   {17.23*11,  48}, 4},
-    {{3|(10<<4)},   {17.23*10,  48}, 4},
-    {{3|(9<<4)},    {17.23*9,  48}, 4},
-    {{3|(8<<4)},    {17.23*8,  48}, 4},
-    {{3|(7<<4)},    {17.23*7,  48}, 4},
-	{{3|(6<<4)},    { 17.23*6,  48}, 4},
-    {{3|(5<<4)},    { 17.23*5,  48}, 4},
-    {{3|(4<<4)},    { 17.23*4,  48}, 4},
-    {{3|(3<<4)},    { 17.23*3,  48}, 4},
-    {{3|(2<<4)},    { 17.23*2,  48}, 4},
-    {{3|(1<<4)},    { 17.23*1,  48}, 4},
-    {{3|(0<<4)},    { 17.23*0,  48}, 1},
-	{{4|(13<<4)},   {17.23*13,  64}, 1},
-    {{4|(11<<4)},   {17.23*11,  64}, 1},
-    {{4|(10<<4)},   {17.23*10,  64}, 1},
-    {{4|(9<<4)},    {17.23*9,  64}, 1},
-    {{4|(8<<4)},    {17.23*8,  64}, 1},
-    {{4|(5<<4)},    { 17.23*5,  64}, 4},
-    {{4|(2<<4)},    { 17.23*2,  64}, 1},
-    {{4|(1<<4)},    { 17.23*1,  64}, 1},
-    {{4|(0<<4)},    { 17.23*0,  64}, 1},
-};
+led_config_t g_led_config = { {
+    {  13,  12,  11,  10,   9,   8,   7,   6,   5,   4,   3,   2,   1,   0 },
+    {  27,  26,  25,  24,  23,  22,  21,  20,  19,  18,  17,  16,  15,  14 },
+    {  40,  39,  38,  37,  36,  35,  34,  33,  32,  31,  30,  29, NO_LED,  28 },
+    {  53,  52,  51,  50,  49,  48,  47,  46,  45,  44,  43,  42, NO_LED,  41 },
+    {  62,  61,  60, NO_LED, NO_LED,  59, NO_LED, NO_LED,  58,  57,  56,  55, NO_LED,  54 }
+}, {
+    { 223,   0 }, { 206,   0 }, { 189,   0 }, { 172,   0 }, { 155,   0 }, { 137,   0 }, { 120,   0 }, { 103,   0 }, {  86,   0 }, {  68,   0 }, {  51,   0 }, {  34,   0 }, {  17,   0 }, {   0,   0 },
+    { 223,  16 }, { 206,  16 }, { 189,  16 }, { 172,  16 }, { 155,  16 }, { 137,  16 }, { 120,  16 }, { 103,  16 }, {  86,  16 }, {  68,  16 }, {  51,  16 }, {  34,  16 }, {  17,  16 }, {   0,  16 },
+    { 223,  32 }, { 189,  32 }, { 172,  32 }, { 155,  32 }, { 137,  32 }, { 120,  32 }, { 103,  32 }, {  86,  32 }, {  68,  32 }, {  51,  32 }, {  34,  32 }, {  17,  32 }, {   0,  32 }, { 223,  48 },
+    { 189,  48 }, { 172,  48 }, { 155,  48 }, { 137,  48 }, { 120,  48 }, { 103,  48 }, {  86,  48 }, {  68,  48 }, {  51,  48 }, {  34,  48 }, {  17,  48 }, {   0,  48 }, { 223,  64 }, { 189,  64 },
+    { 172,  64 }, { 155,  64 }, { 137,  64 }, {  86,  64 }, {  34,  64 }, {  17,  64 }, {   0,  64 }
+}, {
+    1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1,
+    4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1,
+    1, 1, 1, 4, 1, 1, 1
+} };
+
 #endif
 
 void matrix_init_kb(void) {

keyboards/dztech/dz60rgb/keymaps/ansi/config.h

@@ -1,6 +1,2 @@
 #pragma once
 #define dzrgb60_ansi
-#undef DRIVER_1_LED_TOTAL
-#undef DRIVER_LED_TOTAL
-#define DRIVER_1_LED_TOTAL 61
-#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL

keyboards/dztech/dz60rgb/keymaps/ansi/keymap.c

@@ -1,5 +1,4 @@
 #include QMK_KEYBOARD_H
-extern bool g_suspend_state;
 #define _LAYER0 0
 #define _LAYER1 1
 #define _LAYER2 2
@@ -39,10 +38,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		};
 
 void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) {
-  rgb_led led;
   for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
-    led = g_rgb_leds[i];
-    if (HAS_FLAGS(led.flags, LED_FLAG_MODIFIER)) {
+    if (HAS_FLAGS(g_led_config.flags[i], LED_FLAG_MODIFIER)) {
         rgb_matrix_set_color( i, red, green, blue );
     }
   }

keyboards/dztech/dz60rgb/keymaps/default/keymap.c

@@ -1,5 +1,4 @@
 #include QMK_KEYBOARD_H
-extern bool g_suspend_state;
 #define _LAYER0 0
 #define _LAYER1 1
 #define _LAYER2 2

keyboards/dztech/dz60rgb/keymaps/hhkb/config.h

@@ -1,6 +1,2 @@
 #pragma once
 #define dzrgb60_hhkb
-#undef DRIVER_1_LED_TOTAL
-#undef DRIVER_LED_TOTAL
-#define DRIVER_1_LED_TOTAL 62
-#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL

keyboards/dztech/dz60rgb/keymaps/hhkb/keymap.c

@@ -1,5 +1,4 @@
 #include QMK_KEYBOARD_H
-extern bool g_suspend_state;
 #define _LAYER0 0
 #define _LAYER1 1
 #define _LAYER2 2
@@ -40,10 +39,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 
 void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) {
-  rgb_led led;
   for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
-    led = g_rgb_leds[i];
-    if (HAS_FLAGS(led.flags, LED_FLAG_MODIFIER)) {
+    if (HAS_FLAGS(g_led_config.flags[i], LED_FLAG_MODIFIER)) {
         rgb_matrix_set_color( i, red, green, blue );
     }
   }

keyboards/dztech/dz60rgb/keymaps/hhkb_iso/config.h

@@ -1,6 +1,2 @@
 #pragma once
 #define dzrgb60_hhkb_iso
-#undef DRIVER_1_LED_TOTAL
-#undef DRIVER_LED_TOTAL
-#define DRIVER_1_LED_TOTAL 62
-#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL

keyboards/dztech/dz60rgb/keymaps/hhkb_iso/keymap.c

@@ -1,5 +1,4 @@
 #include QMK_KEYBOARD_H
-extern bool g_suspend_state;
 #define _LAYER0 0
 #define _LAYER1 1
 #define _LAYER2 2
@@ -40,10 +39,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		};
 
 void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) {
-  rgb_led led;
   for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
-    led = g_rgb_leds[i];
-    if (HAS_FLAGS(led.flags, LED_FLAG_MODIFIER)) {
+    if (HAS_FLAGS(g_led_config.flags[i], LED_FLAG_MODIFIER)) {
         rgb_matrix_set_color( i, red, green, blue );
     }
   }

keyboards/dztech/dz60rgb/keymaps/iso/config.h

@@ -1,6 +1,2 @@
 #pragma once
 #define dzrgb60_iso
-#undef DRIVER_1_LED_TOTAL
-#undef DRIVER_LED_TOTAL
-#define DRIVER_1_LED_TOTAL 61
-#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL

keyboards/dztech/dz60rgb/keymaps/iso/keymap.c

@@ -1,5 +1,4 @@
 #include QMK_KEYBOARD_H
-extern bool g_suspend_state;
 #define _LAYER0 0
 #define _LAYER1 1
 #define _LAYER2 2
@@ -39,10 +38,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		};
 
 void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) {
-  rgb_led led;
   for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
-    led = g_rgb_leds[i];
-    if (HAS_FLAGS(led.flags, LED_FLAG_MODIFIER)) {
+    if (HAS_FLAGS(g_led_config.flags[i], LED_FLAG_MODIFIER)) {
         rgb_matrix_set_color( i, red, green, blue );
     }
   }

keyboards/dztech/dz60rgb/keymaps/matthewrobo/config.h

@@ -0,0 +1,60 @@
+#pragma once
+
+#define FORCE_NKRO
+
+#define PERMISSIVE_HOLD
+#define TAPPING_TERM 150
+
+#undef DISABLE_RGB_MATRIX_SPLASH
+#undef DISABLE_RGB_MATRIX_MULTISPLASH
+#undef DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
+
+
+// #define DISABLE_RGB_MATRIX_ALPHAS_MODS
+#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#define DISABLE_RGB_MATRIX_BREATHING
+#define DISABLE_RGB_MATRIX_CYCLE_ALL
+#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN
+// #define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#define DISABLE_RGB_MATRIX_DUAL_BEACON
+#define DISABLE_RGB_MATRIX_RAINBOW_BEACON
+#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+#define DISABLE_RGB_MATRIX_RAINDROPS
+#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+#define DISABLE_RGB_MATRIX_DIGITAL_RAIN
+#define DISABLE_RGB_MATRIX_SOLID_REACTIVE
+// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+// #define DISABLE_RGB_MATRIX_SPLASH
+// #define DISABLE_RGB_MATRIX_MULTISPLASH
+// #define DISABLE_RGB_MATRIX_SOLID_SPLASH
+// #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
+
+#define QMK_KEYS_PER_SCAN 4
+
+// #define RGB_MATRIX_KEYRELEASES
+
+
+// some speed shit
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+#ifndef NO_DEBUG
+#define NO_DEBUG
+#endif // !NO_DEBUG
+#if !defined(NO_PRINT) && !defined(CONSOLE_ENABLE)
+#define NO_PRINT
+#endif // !NO_PRINT
+
+#define NO_ACTION_ONESHOT
+#define TAPPING_FORCE_HOLD
+#define IGNORE_MOD_TAP_INTERRUPT
+
+// #include "config_led.h"
+// #include "dz60rgb.h"

keyboards/dztech/dz60rgb/keymaps/matthewrobo/keymap.c

@@ -0,0 +1,331 @@
+#include QMK_KEYBOARD_H
+
+
+enum dz60rgb_layers {
+	_QWERTY,
+	_FNM,
+	_NAV,
+	_RGB,
+	_FNC
+};
+
+enum dz60rgb_keycodes {
+	REBOOT = SAFE_RANGE,
+	MAS_CRM,
+	MAS_PRP,
+	MAS_RED,
+	MAS_GRN,
+	MAS_BLU,
+	MAS_CYN,
+	MAS_MGT,
+	MAS_YEL,
+	MAS_KEY,
+	MAS_WHT,
+};
+#define _V_V_V_ KC_TRNS
+#define LT_CAPS LT(_NAV, KC_CAPS)
+#define LT_DEL  LT(_RGB, KC_DEL)
+extern bool autoshift_enabled;
+#define MT_SLSH RSFT_T(KC_SLSH)
+#define MT_APP  RALT_T(KC_APP)
+#define LM_LALT LM(_FNM, MOD_LALT)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[_QWERTY] = LAYOUT(
+		KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, \
+		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, \
+		LT_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,           \
+		KC_LSPO, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  MT_SLSH,          KC_UP,   LT_DEL,  \
+		KC_LCTL, KC_LGUI, LM_LALT,       KC_SPC,                                MT_APP,  MO(_FNC),         KC_LEFT, KC_DOWN, KC_RGHT  \
+	),
+	[_FNM] = LAYOUT(
+		_______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  _______, _______, _______, \
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          \
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, \
+		_______, _______, _V_V_V_,                   _______,                   _______, _______,          _______, _______, _______  \
+	),
+	[_NAV] = LAYOUT(
+		KC_NLCK, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_P7,   KC_P8,   KC_P9,   KC_PAST, KC_PMNS, KC_PPLS, KC_DEL,  \
+		_______, KC_PGUP, KC_HOME, KC_UP,   KC_END,  _______, _______, KC_P4,   KC_P5,   KC_P6,   KC_PSLS, KC_PSCR, KC_SLCK, KC_INS,  \
+		_V_V_V_, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, KC_P1,   KC_P2,   KC_P3,   _______, _______, KC_PENT,          \
+		_______, _______, _______, _______, _______, _______, KC_P0,   KC_P0,   KC_P0,   KC_PDOT, _______,          _______, _______, \
+		_______, _______, _______,                   _______,                   _______, _______,          _______, _______, _______  \
+	),
+	[_RGB] = LAYOUT(
+		_______, KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, \
+		_______, RGB_MOD,  RGB_SPI, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, MAS_MGT, MAS_BLU, MAS_WHT, RGB_RMOD, RGB_MOD, _______, \
+		_______, RGB_RMOD, RGB_SPD, RGB_HUD, RGB_SAD, RGB_VAD, _______, MAS_RED, MAS_KEY, MAS_CYN, MAS_PRP, _______, _______,          \
+		_______, RGB_TOG,  _______, _______, _______, _______, _______, MAS_YEL, MAS_GRN, MAS_CRM, _______,          _______, _V_V_V_, \
+		_______, _______,  _______,                   _______,                   _______, _______,          _______, _______, _______  \
+	),
+	[_FNC] = LAYOUT( // fuck it edition
+		RCTL(KC_ESC),  KC_F1,      KC_F2,      KC_F3,      KC_F4,      KC_F5,      KC_F6,      KC_F7,      KC_F8,         KC_F9,        KC_F10,        KC_F11,        KC_F12,        KC_ASTG,       \
+		RCTL(KC_TAB),  RCTL(KC_Q), RCTL(KC_W), RCTL(KC_E), RCTL(KC_R), RCTL(KC_T), RCTL(KC_Y), RCTL(KC_U), RCTL(KC_I),    RCTL(KC_O),   RCTL(KC_P),    RCTL(KC_LBRC), RCTL(KC_RBRC), RCTL(KC_BSLS), \
+		RCTL(KC_CAPS), RCTL(KC_A), RCTL(KC_S), RCTL(KC_D), RCTL(KC_F), RCTL(KC_G), RCTL(KC_H), RCTL(KC_J), RCTL(KC_K),    RCTL(KC_L),   RCTL(KC_SCLN), RCTL(KC_QUOT), RCTL(KC_ENT),                 \
+		RCTL(KC_LSFT), RCTL(KC_Z), RCTL(KC_X), RCTL(KC_C), RCTL(KC_V), REBOOT,     RCTL(KC_N), RCTL(KC_M), RCTL(KC_COMM), RCTL(KC_DOT), RCTL(KC_SLSH),                KC_VOLU, RCTL(KC_DEL),        \
+		RCTL(KC_LCTL), RCTL(KC_LGUI), RCTL(KC_LALT),                   RCTL(KC_SPC),                       KC_MUTE,       _V_V_V_,                     RCTL(KC_LEFT), KC_VOLD, RCTL(KC_RGHT)        \
+	),
+	/*
+	[_FNC] = LAYOUT(
+		_______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_ASTG, \
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          \
+		_______, _______, _______, _______, _______, REBOOT,  _______, _______, _______, _______, RCTL(KC_SLSH),    KC_VOLU, RCTL(KC_DEL), \
+		_______, _______, _______,                   _______,                   KC_MUTE, _______,    RCTL(KC_LEFT), KC_VOLD, RCTL(KC_RGHT)  \
+	),
+	[_LAYER] = LAYOUT(
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          \
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, \
+		_______, _______, _______,                   _______,                   _______, _______,          _______, _______, _______  \
+	),
+	 [_LAYER] = LAYOUT(
+		13,      12,      11,       10,      9,       8,       7,       6,       5,       4,       3,       2,       1,       0,      \
+		27,      26,      25,       24,      23,      22,      21,      20,      19,      18,      17,      16,      15,      14,     \
+		40,      39,      38,       37,      36,      35,      34,      33,      32,      31,      30,      29,      28,              \
+		53,      52,      51,       50,      49,      48,      47,      46,      45,      44,      43,               42,      41,     \
+		62,      61,      60,                         59,                        58,      57,               56,      55,      54      \
+	),
+	*/
+};
+
+void rgb_matrix_indicators_user(void)
+{
+	uint8_t this_led = host_keyboard_leds();
+
+	if (!g_suspend_state && rgb_matrix_config.enable) {
+		switch (biton32(layer_state)) {
+		case _NAV:
+			if (this_led & (1 << USB_LED_NUM_LOCK)) {
+				rgb_matrix_set_color(13, 0xFF, 0x00, 0x00);
+				rgb_matrix_set_color(19, 0xFF, 0xFF, 0x00);
+			} else {
+				rgb_matrix_set_color(13, 0x00, 0x00, 0x00);
+				rgb_matrix_set_color(19, 0xFF, 0x00, 0x00);
+			}
+
+			rgb_matrix_set_color(40, 0xFF, 0xFF, 0xFF); // layer indicator
+			// ESDF
+			rgb_matrix_set_color(24, 0xFF, 0x00, 0x00);
+			rgb_matrix_set_color(38, 0xFF, 0x00, 0x00);
+			rgb_matrix_set_color(37, 0xFF, 0x00, 0x00);
+			rgb_matrix_set_color(36, 0xFF, 0x00, 0x00);
+			// home/end
+			rgb_matrix_set_color(25, 0x00, 0xFF, 0x00);
+			rgb_matrix_set_color(23, 0x00, 0xFF, 0x00);
+			// pgup/dn
+			rgb_matrix_set_color(26, 0x00, 0x00, 0xFF);
+			rgb_matrix_set_color(39, 0x00, 0x00, 0xFF);
+			// numpad
+			rgb_matrix_set_color(6,  0xFF, 0xFF, 0x00);
+			rgb_matrix_set_color(5,  0xFF, 0xFF, 0x00);
+			rgb_matrix_set_color(4,  0xFF, 0xFF, 0x00);
+			rgb_matrix_set_color(20, 0xFF, 0xFF, 0x00);
+			rgb_matrix_set_color(18, 0xFF, 0xFF, 0x00);
+			rgb_matrix_set_color(33, 0xFF, 0xFF, 0x00);
+			rgb_matrix_set_color(32, 0xFF, 0xFF, 0x00);
+			rgb_matrix_set_color(31, 0xFF, 0xFF, 0x00);
+			// zero
+			rgb_matrix_set_color(47, 0xFF, 0x00, 0x00);
+			rgb_matrix_set_color(46, 0xFF, 0x00, 0x00);
+			rgb_matrix_set_color(45, 0xFF, 0x00, 0x00);
+			// dot
+			rgb_matrix_set_color(44, 0x00, 0x00, 0xFF);
+			// math shit
+			rgb_matrix_set_color(3,  0x00, 0x00, 0xFF);
+			rgb_matrix_set_color(2,  0x00, 0x00, 0xFF);
+			rgb_matrix_set_color(1,  0x00, 0x00, 0xFF);
+			rgb_matrix_set_color(0,  0x00, 0x00, 0xFF);
+			rgb_matrix_set_color(17, 0x00, 0x00, 0xFF);
+			// other
+			rgb_matrix_set_color(16, 0xFF, 0xFF, 0xFF);
+			rgb_matrix_set_color(15, 0xFF, 0xFF, 0xFF);
+			rgb_matrix_set_color(14, 0xFF, 0xFF, 0xFF);
+			break;
+
+		case _RGB: {
+			HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, rgb_matrix_config.val };
+			HSV hui = hsv;
+			HSV hud = hsv;
+			HSV sai = hsv;
+			HSV sad = hsv;
+			HSV vai = hsv;
+			HSV vad = hsv;
+			hui.h = hsv.h + 8;
+			hud.h = hsv.h - 8;
+			sai.s = hsv.s + 16 > 255 ? 255 : hsv.s + 16;
+			sad.s = hsv.s - 16 < 0   ?   0 : hsv.s - 16;
+			vai.v = hsv.v + 16 > 255 ? 255 : hsv.v + 16;
+			vad.v = hsv.v - 16 < 0   ?   0 : hsv.v - 16;
+			RGB rgb = hsv_to_rgb(hsv);
+			RGB rgbHUI = hsv_to_rgb(hui);
+			RGB rgbHUD = hsv_to_rgb(hud);
+			RGB rgbSAI = hsv_to_rgb(sai);
+			RGB rgbSAD = hsv_to_rgb(sad);
+			RGB rgbVAI = hsv_to_rgb(vai);
+			RGB rgbVAD = hsv_to_rgb(vad);
+			rgb_matrix_set_color(41, 0xFF, 0xFF, 0xFF); // layer indicator
+			rgb_matrix_set_color(59, rgb.r, rgb.g, rgb.b); // color indicator
+			rgb_matrix_set_color(26, 0xFF, 0x80, 0x00); //MOD
+			rgb_matrix_set_color(39, 0xFF, 0x80, 0x00); //MOD
+			rgb_matrix_set_color(16, 0xFF, 0x80, 0x00); //RGB_RMOD
+			rgb_matrix_set_color(15, 0xFF, 0x80, 0x00); //MOD
+			rgb_matrix_set_color(52, 0xFF, 0x40, 0x00); //TOG
+			rgb_matrix_set_color(25, 0x80, 0x80, 0x80); //SPI
+			rgb_matrix_set_color(38, 0x80, 0x80, 0x80); //SPD
+			rgb_matrix_set_color(24, rgbHUI.r, rgbHUI.g, rgbHUI.b); //HUI
+			rgb_matrix_set_color(37, rgbHUD.r, rgbHUD.g, rgbHUD.b); //HUD
+			rgb_matrix_set_color(23, rgbSAI.r, rgbSAI.g, rgbSAI.b); //SAI
+			rgb_matrix_set_color(36, rgbSAD.r, rgbSAD.g, rgbSAD.b); //SAD
+			rgb_matrix_set_color(22, rgbVAI.r, rgbVAI.g, rgbVAI.b); //VAI
+			rgb_matrix_set_color(35, rgbVAD.r, rgbVAD.g, rgbVAD.b); //VAD
+			rgb_matrix_set_color(19, 0xF0, 0x00, 0xFF); //MAS_MGT
+			rgb_matrix_set_color(18, 0x00, 0x02, 0xFF); //MAS_BLU
+			rgb_matrix_set_color(33, 0xFF, 0x00, 0x00); //MAS_RED
+			rgb_matrix_set_color(32, 0x00, 0x00, 0x00); //MAS_KEY
+			rgb_matrix_set_color(31, 0x00, 0xFF, 0xF7); //MAS_CYN
+			rgb_matrix_set_color(46, 0xFF, 0xDA, 0x00); //MAS_YEL
+			rgb_matrix_set_color(45, 0x00, 0xFF, 0x01); //MAS_GRN
+			rgb_matrix_set_color(44, 0xFF, 0xA5, 0x18); //MAS_CRM
+			rgb_matrix_set_color(30, 0x81, 0x3C, 0xFF); //MAS_PRP
+			rgb_matrix_set_color(17, 0xFF, 0xFF, 0xFF); //MAS_WHT
+		}
+		break;
+
+		case _FNC:
+			rgb_matrix_set_color(57, 0xFF, 0xFF, 0xFF); // layer indicator
+			rgb_matrix_set_color(48, 0xFF, 0x00, 0x00); // bootloader
+			rgb_matrix_set_color(42, 0x00, 0x80, 0xFF); // vol
+			rgb_matrix_set_color(55, 0x00, 0x80, 0xFF);
+			rgb_matrix_set_color(58, 0xFF, 0x00, 0x00); // mute
+			rgb_matrix_set_color(56, 0xFF, 0x80, 0x00); // ctrl+left/right
+			rgb_matrix_set_color(54, 0xFF, 0x80, 0x00);
+			rgb_matrix_set_color(41, 0xFF, 0x00, 0x40); // ctrl+delete
+			rgb_matrix_set_color(43, 0xFF, 0x00, 0x40); // ctrl+slash
+
+			if (this_led & (1 << !autoshift_enabled)) {
+				rgb_matrix_set_color(0, 0xFF, 0x00, 0x00); // KC_ASTG
+			} else {
+				rgb_matrix_set_color(0, 0xFF, 0xFF, 0x00);
+			}
+
+			break;
+		}
+	}
+
+	if (this_led & (1 << USB_LED_CAPS_LOCK)) {
+		rgb_matrix_set_color(40, 0xFF, 0xFF, 0xFF);
+	}
+}
+
+void matrix_init_user(void)
+{
+	//user initialization
+	autoshift_disable();
+}
+
+void matrix_scan_user(void)
+{
+	//user matrix
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t* record)
+{
+	static uint32_t key_timer;
+
+	switch (keycode) {
+	case REBOOT:
+		if (record->event.pressed) {
+			key_timer = timer_read32();
+		} else {
+			if (timer_elapsed32(key_timer) >= 500) {
+				rgb_matrix_enable_noeeprom();
+				rgb_matrix_mode_noeeprom(1);
+				rgb_matrix_sethsv_noeeprom(11, 11, 11);
+				wait_ms(150);
+				reset_keyboard();
+			} else {
+				register_code(KC_RCTL);
+				tap_code(KC_B);
+				unregister_code(KC_RCTL);
+			}
+		}
+
+		return false;
+
+	case MAS_CRM:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(32, 160, 255);
+		}
+
+		return false;
+
+	case MAS_PRP:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(192, 112, 255);
+		}
+
+		return false;
+
+	case MAS_RED:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(0, 255, 255);
+		}
+
+		return false;
+
+	case MAS_GRN:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(88, 255, 255);
+		}
+
+		return false;
+
+	case MAS_BLU:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(168, 255, 255);
+		}
+
+		return false;
+
+	case MAS_CYN:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(128, 255, 255);
+		}
+
+		return false;
+
+	case MAS_MGT:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(216, 255, 255);
+		}
+
+		return false;
+
+	case MAS_YEL:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(40, 255, 255);
+		}
+
+		return false;
+
+	case MAS_KEY:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(0, 0, 0);
+		}
+
+		return false;
+
+	case MAS_WHT:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(128, 0, 255);
+		}
+
+		return false;
+
+	default:
+		return true;
+	}
+}

keyboards/dztech/dz60rgb/keymaps/matthewrobo/rules.mk

@@ -0,0 +1,7 @@
+NKRO_ENABLE = yes                 # USB Nkey Rollover
+AUTO_SHIFT_ENABLE = yes      # Auto Shift
+# VELOCIKEY_ENABLE = yes
+
+EXTRAFLAGS += -flto
+
+# SRC += dz60rgb.c

keyboards/dztech/dz60rgb/keymaps/mekanist/keymap.c

@@ -1,5 +1,4 @@
 #include QMK_KEYBOARD_H
-extern bool g_suspend_state;
 #define _LAYER0 0
 #define _LAYER1 1
 #define _LAYER2 2
@@ -50,40 +49,35 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 
 
-void rgb_matrix_layer_helper(uint8_t red, uint8_t green, uint8_t blue, bool default_layer)
-{
-	rgb_led led;
-	
-	for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
-		led = g_rgb_leds[i];
-
-		if (HAS_FLAGS(led.flags, LED_FLAG_MODIFIER)) {
-				rgb_matrix_set_color( i, red, green, blue );
-		}
-	}
+void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue) {
+  for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
+    if (HAS_FLAGS(g_led_config.flags[i], LED_FLAG_MODIFIER)) {
+        rgb_matrix_set_color( i, red, green, blue );
+    }
+  }
 }
 
 void rgb_matrix_indicators_user(void)
 {
 	uint8_t this_led = host_keyboard_leds();
-	
+
 	if (!g_suspend_state) {
 		switch (biton32(layer_state)) {
 		case _LAYER1:
 			rgb_matrix_layer_helper(0xFF, 0x00, 0x00, false); break;
-			
+
 		case _LAYER2:
 			rgb_matrix_layer_helper(0x00, 0xFF, 0x00, false); break;
-			
+
 		case _LAYER4:
 			rgb_matrix_layer_helper(0xFF, 0xFF, 0x00, false); break;
 		}
 	}
-	
+
 	if (this_led & (1 << USB_LED_CAPS_LOCK)) {
 		rgb_matrix_set_color(40, 0xFF, 0xFF, 0xFF);
 	}
-	
+
 	switch (biton32(layer_state)) {
 	case _LAYER3:
 		if (this_led & (1 << USB_LED_NUM_LOCK)) {
@@ -91,7 +85,7 @@ void rgb_matrix_indicators_user(void)
 		} else {
 			rgb_matrix_set_color(13, 0x00, 0x00, 0x00);
 		}
-		
+
 		rgb_matrix_set_color(0, 0x00, 0xFF, 0x00);
 		rgb_matrix_set_color(1, 0x00, 0x00, 0x00);
 		rgb_matrix_set_color(1, 0x00, 0xFF, 0x00);

keyboards/dztech/dz60rgb/mcuconf.h

@@ -1,257 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef MCUCONF_H
-#define MCUCONF_H
-
-/*
- * STM32F3xx drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 15...0       Lowest...Highest.
- *
- * DMA priorities:
- * 0...3        Lowest...Highest.
- */
-
-#define STM32F3xx_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT                       FALSE
-#define STM32_PVD_ENABLE                    FALSE
-#define STM32_PLS                           STM32_PLS_LEV0
-#define STM32_HSI_ENABLED                   TRUE
-#define STM32_LSI_ENABLED                   TRUE
-#define STM32_HSE_ENABLED                   TRUE
-#define STM32_LSE_ENABLED                   FALSE
-#define STM32_SW                            STM32_SW_PLL
-#define STM32_PLLSRC                        STM32_PLLSRC_HSE
-#define STM32_PREDIV_VALUE                  1
-#define STM32_PLLMUL_VALUE                  9
-#define STM32_HPRE                          STM32_HPRE_DIV1
-#define STM32_PPRE1                         STM32_PPRE1_DIV2
-#define STM32_PPRE2                         STM32_PPRE2_DIV2
-#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
-#define STM32_ADC12PRES                     STM32_ADC12PRES_DIV1
-#define STM32_ADC34PRES                     STM32_ADC34PRES_DIV1
-#define STM32_USART1SW                      STM32_USART1SW_PCLK
-#define STM32_USART2SW                      STM32_USART2SW_PCLK
-#define STM32_USART3SW                      STM32_USART3SW_PCLK
-#define STM32_UART4SW                       STM32_UART4SW_PCLK
-#define STM32_UART5SW                       STM32_UART5SW_PCLK
-#define STM32_I2C1SW                        STM32_I2C1SW_SYSCLK
-#define STM32_I2C2SW                        STM32_I2C2SW_SYSCLK
-#define STM32_TIM1SW                        STM32_TIM1SW_PCLK2
-#define STM32_TIM8SW                        STM32_TIM8SW_PCLK2
-#define STM32_RTCSEL                        STM32_RTCSEL_LSI
-#define STM32_USB_CLOCK_REQUIRED            TRUE
-#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
-
-#undef STM32_HSE_BYPASS
-// #error "oh no"
-// #endif
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_DUAL_MODE                 FALSE
-#define STM32_ADC_COMPACT_SAMPLES           FALSE
-#define STM32_ADC_USE_ADC1                  FALSE
-#define STM32_ADC_USE_ADC2                  FALSE
-#define STM32_ADC_USE_ADC3                  FALSE
-#define STM32_ADC_USE_ADC4                  FALSE
-#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
-#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(2, 1)
-#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(2, 5)
-#define STM32_ADC_ADC4_DMA_STREAM           STM32_DMA_STREAM_ID(2, 2)
-#define STM32_ADC_ADC1_DMA_PRIORITY         2
-#define STM32_ADC_ADC2_DMA_PRIORITY         2
-#define STM32_ADC_ADC3_DMA_PRIORITY         2
-#define STM32_ADC_ADC4_DMA_PRIORITY         2
-#define STM32_ADC_ADC12_IRQ_PRIORITY        5
-#define STM32_ADC_ADC3_IRQ_PRIORITY         5
-#define STM32_ADC_ADC4_IRQ_PRIORITY         5
-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     5
-#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     5
-#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     5
-#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY     5
-#define STM32_ADC_ADC12_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
-#define STM32_ADC_ADC34_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
-
-/*
- * CAN driver system settings.
- */
-#define STM32_CAN_USE_CAN1                  FALSE
-#define STM32_CAN_CAN1_IRQ_PRIORITY         11
-
-/*
- * DAC driver system settings.
- */
-#define STM32_DAC_DUAL_MODE                 FALSE
-#define STM32_DAC_USE_DAC1_CH1              TRUE
-#define STM32_DAC_USE_DAC1_CH2              TRUE
-#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
-#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
-#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
-#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
-
-/*
- * EXT driver system settings.
- */
-#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
-#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
-#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI30_32_IRQ_PRIORITY    6
-#define STM32_EXT_EXTI33_IRQ_PRIORITY       6
-
-/*
- * GPT driver system settings.
- */
-#define STM32_GPT_USE_TIM1                  FALSE
-#define STM32_GPT_USE_TIM2                  FALSE
-#define STM32_GPT_USE_TIM3                  FALSE
-#define STM32_GPT_USE_TIM4                  FALSE
-#define STM32_GPT_USE_TIM6                  TRUE
-#define STM32_GPT_USE_TIM7                  TRUE
-#define STM32_GPT_USE_TIM8                  TRUE
-#define STM32_GPT_TIM1_IRQ_PRIORITY         7
-#define STM32_GPT_TIM2_IRQ_PRIORITY         7
-#define STM32_GPT_TIM3_IRQ_PRIORITY         7
-#define STM32_GPT_TIM4_IRQ_PRIORITY         7
-#define STM32_GPT_TIM6_IRQ_PRIORITY         7
-#define STM32_GPT_TIM7_IRQ_PRIORITY         7
-#define STM32_GPT_TIM8_IRQ_PRIORITY         7
-
-/*
- * I2C driver system settings.
- */
-#define STM32_I2C_USE_I2C1                  TRUE
-#define STM32_I2C_USE_I2C2                  FALSE
-#define STM32_I2C_BUSY_TIMEOUT              50
-#define STM32_I2C_I2C1_IRQ_PRIORITY         10
-#define STM32_I2C_I2C2_IRQ_PRIORITY         10
-#define STM32_I2C_USE_DMA                   TRUE
-#define STM32_I2C_I2C1_DMA_PRIORITY         1
-#define STM32_I2C_I2C2_DMA_PRIORITY         1
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
-
-/*
- * ICU driver system settings.
- */
-#define STM32_ICU_USE_TIM1                  FALSE
-#define STM32_ICU_USE_TIM2                  FALSE
-#define STM32_ICU_USE_TIM3                  FALSE
-#define STM32_ICU_USE_TIM4                  FALSE
-#define STM32_ICU_USE_TIM8                  FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY         7
-#define STM32_ICU_TIM2_IRQ_PRIORITY         7
-#define STM32_ICU_TIM3_IRQ_PRIORITY         7
-#define STM32_ICU_TIM4_IRQ_PRIORITY         7
-#define STM32_ICU_TIM8_IRQ_PRIORITY         7
-
-/*
- * PWM driver system settings.
- */
-#define STM32_PWM_USE_ADVANCED              FALSE
-#define STM32_PWM_USE_TIM1                  FALSE
-#define STM32_PWM_USE_TIM2                  FALSE
-#define STM32_PWM_USE_TIM3                  FALSE
-#define STM32_PWM_USE_TIM4                  FALSE
-#define STM32_PWM_USE_TIM8                  FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY         7
-#define STM32_PWM_TIM2_IRQ_PRIORITY         7
-#define STM32_PWM_TIM3_IRQ_PRIORITY         7
-#define STM32_PWM_TIM4_IRQ_PRIORITY         7
-#define STM32_PWM_TIM8_IRQ_PRIORITY         7
-
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1             FALSE
-#define STM32_SERIAL_USE_USART2             FALSE
-#define STM32_SERIAL_USE_USART3             FALSE
-#define STM32_SERIAL_USE_UART4              FALSE
-#define STM32_SERIAL_USE_UART5              FALSE
-#define STM32_SERIAL_USART1_PRIORITY        12
-#define STM32_SERIAL_USART2_PRIORITY        12
-#define STM32_SERIAL_USART3_PRIORITY        12
-#define STM32_SERIAL_UART4_PRIORITY         12
-#define STM32_SERIAL_UART5_PRIORITY         12
-
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1                  FALSE
-#define STM32_SPI_USE_SPI2                  FALSE
-#define STM32_SPI_USE_SPI3                  FALSE
-#define STM32_SPI_SPI1_DMA_PRIORITY         1
-#define STM32_SPI_SPI2_DMA_PRIORITY         1
-#define STM32_SPI_SPI3_DMA_PRIORITY         1
-#define STM32_SPI_SPI1_IRQ_PRIORITY         10
-#define STM32_SPI_SPI2_IRQ_PRIORITY         10
-#define STM32_SPI_SPI3_IRQ_PRIORITY         10
-#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
-
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY               8
-#define STM32_ST_USE_TIMER                  2
-
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1               FALSE
-#define STM32_UART_USE_USART2               FALSE
-#define STM32_UART_USE_USART3               FALSE
-#define STM32_UART_USART1_IRQ_PRIORITY      12
-#define STM32_UART_USART2_IRQ_PRIORITY      12
-#define STM32_UART_USART3_IRQ_PRIORITY      12
-#define STM32_UART_USART1_DMA_PRIORITY      0
-#define STM32_UART_USART2_DMA_PRIORITY      0
-#define STM32_UART_USART3_DMA_PRIORITY      0
-#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
-
-/*
- * USB driver system settings.
- */
-#define STM32_USB_USE_USB1                  TRUE
-#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
-#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
-#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
-
-/*
- * WDG driver system settings.
- */
-#define STM32_WDG_USE_IWDG                  FALSE
-
-#endif /* MCUCONF_H */

keyboards/dztech/dz60rgb/rules.mk

@@ -1,43 +1,6 @@
-# project specific files
-
-## chip/board settings
-#   the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F3xx
-
-# Linker script to use
-#   it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F303xC
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f3xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = GENERIC_STM32_F303XC
-
-# Cortex version
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-
-USE_FPU = yes
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
-OPT_DEFS =
-
-# Options to pass to dfu-util when flashing
+MCU  = STM32F303
 DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
 DFU_SUFFIX_ARGS = -p DF11 -v 0483
-
-
 BACKLIGHT_ENABLE = no
 BOOTMAGIC_ENABLE = lite           # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes              # Mouse keys

keyboards/dztech/dz65rgb/config.h

@@ -26,4 +26,4 @@
 #define DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 35
 #define DRIVER_2_LED_TOTAL 33
-#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL
+#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)

keyboards/dztech/dz65rgb/dz65rgb.c

@@ -73,82 +73,42 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
 	{1, C9_16, C7_15, C6_15}, // LD16
 	{1, C8_16, C7_16, C6_16}, // LD17
 };
-rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
-    {{1|(7<<4)},   {16*7,  16}, 4},
-    {{1|(6<<4)},   {16*6,  16}, 4},
-    {{1|(5<<4)},   {16*5,  16}, 4},
-    {{1|(4<<4)},   {16*4,  16}, 4},
-    {{1|(3<<4)},   {16*3,  16}, 4},
-    {{1|(2<<4)},    {16*2,  16}, 4},
-    {{1|(1<<4)},    {16*1,  16}, 4},
-    {{1|(0<<4)},    {16*0,  16}, 1},
-	{{2|(0<<4)},    {16*0,  32}, 1},
-    {{0|(8<<4)},    {16*8,  0}, 1},
-    {{0|(7<<4)},    {16*7,  0}, 1},
-    {{0|(6<<4)},    {16*6,   0}, 1},
-    {{0|(5<<4)},    {16*5,  0}, 1},
-    {{0|(4<<4)},    {16*4,  0}, 1},
-    {{0|(3<<4)},    {16*3, 0}, 1},
-    {{0|(2<<4)},    {16*2,  0}, 1},
-    {{0|(1<<4)},    {16*1,  0}, 1},
-    {{0|(0<<4)},    {16*0,  0}, 1},
-    {{0|(9<<4)},    {16*9,  0}, 1},
-    {{0|(10<<4)},   {16*10,  0}, 1},
-    {{0|(11<<4)},   {16*11,  0}, 1},
-    {{0|(12<<4)},   {16*12,  0}, 1},
-    {{0|(13<<4)},   {16*13,  0}, 1},
-    {{0|(14<<4)},   {16*14,  0}, 1},
-    {{1|(14<<4)},    {16*14,  16}, 1},
-    {{2|(14<<4)},    {16*14,  32}, 1},
-    {{1|(8<<4)},    {16*8,  16}, 4},
-    {{1|(9<<4)},    {16*9,  16}, 4},
-    {{1|(10<<4)},    {16*10,  16}, 4},
-    {{1|(11<<4)},    {16*11,  16}, 4},
-    {{1|(12<<4)},    {16*12,  16}, 4},
-    {{1|(13<<4)},    {16*13,  16}, 4},
-    {{3|(14<<4)},    {16*14,  48}, 1},
-    {{4|(14<<4)},    {16*14,  64}, 1},
-    {{4|(13<<4)},    {16*13,  64}, 1},
-	{{4|(5<<4)},   {16*5,  64}, 1},
-	{{3|(5<<4)},   {16*5,  48}, 4},
-    {{3|(4<<4)},   {16*4,  48}, 4},
-    {{3|(3<<4)},   {16*3,  48}, 4},
-    {{3|(2<<4)},   {16*2,  48}, 4},
-    {{3|(1<<4)},   {16*1,  48}, 4},
-    {{4|(2<<4)},   {16*2,  64}, 1},
-    {{4|(1<<4)},   {16*1,  64}, 1},
-    {{2|(6<<4)},   {16*6, 32}, 4},
-    {{2|(5<<4)},   {16*5, 32}, 4},
-    {{2|(4<<4)},   {16*4, 32}, 4},
-    {{2|(3<<4)},   {16*3, 32}, 4},
-    {{2|(2<<4)},   {16*2, 32}, 4},
-    {{2|(1<<4)},   {16*1, 32}, 4},
-    {{3|(0<<4)},   {16*0,  48}, 1},
-    {{4|(0<<4)},   {16*0,  64}, 1},
-	{{2|(7<<4)},   {16*7,  32}, 4},
-	{{2|(8<<4)},   {16*8,  32}, 4},
-    {{2|(9<<4)},   {16*9,  32}, 4},
-    {{2|(10<<4)},   {16*10,  32}, 4},
-    {{2|(11<<4)},   {16*11,  32}, 4},
-    {{2|(13<<4)},   {16*13,  32}, 4},
-    {{3|(10<<4)},   {16*10,  48}, 4},
-    {{3|(11<<4)},   {16*11,  48}, 4},
-    {{3|(13<<4)},   {16*13,  48}, 4},
-    {{3|(6<<4)},   {16*6,  48}, 4},
-    {{3|(7<<4)},   {16*7,  48}, 4},
-    {{3|(8<<4)},   {16*8,  48}, 4},
-    {{3|(9<<4)},   {16*9,  48}, 4},
-    {{4|(8<<4)},   {16*8,  64}, 1},
-    {{4|(9<<4)},   {16*9,  64}, 1},
-    {{4|(10<<4)},  {16*10,  64}, 1},
-    {{4|(11<<4)},  {16*11,  64}, 1},
-};
 
+led_config_t g_led_config = { {
+    {  17,  16,  15,  14,  13,  12,  11,  10,   9,  18,  19,  20,  21,  22,  23 },
+    {   7,   6,   5,   4,   3,   2,   1,   0,  26,  27,  28,  29,  30,  31,  24 },
+    {   8,  48,  47,  46,  45,  44,  43,  51,  52,  53,  54,  55, NO_LED,  56,  25 },
+    {  49,  40,  39,  38,  37,  36,  60,  61,  62,  63,  57,  58, NO_LED,  59,  32 },
+    {  50,  42,  41, NO_LED, NO_LED,  35, NO_LED, NO_LED,  64,  65,  66,  67, NO_LED,  34,  33 }
+}, {
+    { 112,  16 }, {  96,  16 }, {  80,  16 }, {  64,  16 }, {  48,  16 }, {  32,  16 }, {  16,  16 }, {   0,  16 }, {   0,  32 }, { 128,   0 }, { 112,   0 }, {  96,   0 }, {  80,   0 }, {  64,   0 }, {  48,   0 },
+    {  32,   0 }, {  16,   0 }, {   0,   0 }, { 144,   0 }, { 160,   0 }, { 176,   0 }, { 192,   0 }, { 208,   0 }, { 224,   0 }, { 224,  16 }, { 224,  32 }, { 128,  16 }, { 144,  16 }, { 160,  16 }, { 176,  16 },
+    { 192,  16 }, { 208,  16 }, { 224,  48 }, { 224,  64 }, { 208,  64 }, {  80,  64 }, {  80,  48 }, {  64,  48 }, {  48,  48 }, {  32,  48 }, {  16,  48 }, {  32,  64 }, {  16,  64 }, {  96,  32 }, {  80,  32 },
+    {  64,  32 }, {  48,  32 }, {  32,  32 }, {  16,  32 }, {   0,  48 }, {   0,  64 }, { 112,  32 }, { 128,  32 }, { 144,  32 }, { 160,  32 }, { 176,  32 }, { 208,  32 }, { 160,  48 }, { 176,  48 }, { 208,  48 },
+    {  96,  48 }, { 112,  48 }, { 128,  48 }, { 144,  48 }, { 128,  64 }, { 144,  64 }, { 160,  64 }, { 176,  64 }
+}, {
+    4, 4, 4, 4, 4, 4, 4, 1, 1, 1, 1, 1, 1, 1, 1,
+    1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 4, 4, 4, 4,
+    4, 4, 1, 1, 1, 1, 4, 4, 4, 4, 4, 1, 1, 4, 4,
+    4, 4, 4, 4, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+    4, 4, 4, 4, 1, 1, 1, 1
+} };
+
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+    return process_record_user(keycode, record);
+}
 void suspend_power_down_kb(void)
 {
     rgb_matrix_set_suspend_state(true);
     suspend_power_down_user();
 }
+
 void suspend_wakeup_init_kb(void)
 {
     rgb_matrix_set_suspend_state(false);

keyboards/dztech/dz65rgb/keymaps/default/keymap.c

@@ -1,5 +1,4 @@
 #include QMK_KEYBOARD_H
-extern bool g_suspend_state;
 #define _LAYER0 0
 #define _LAYER1 1
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {

keyboards/dztech/dz65rgb/rules.mk

@@ -1,4 +1,6 @@
 MCU  = STM32F303
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+DFU_SUFFIX_ARGS = -p DF11 -v 0483
 BACKLIGHT_ENABLE = no
 BOOTMAGIC_ENABLE = lite           # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes              # Mouse keys

keyboards/ergodash/ergodash.h

@@ -6,26 +6,6 @@
 #ifdef KEYBOARD_ergodash_rev1
     #include "rev1.h"
 
-    // Used to create a keymap using only KC_ prefixed keys
-    #define LAYOUT_kc( \
-        L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
-        L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
-        L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
-        L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36, \
-        LT0, LT1, LT2, LT3,      LT4, LT5, RT0, RT1,      RT2, RT3, RT4, RT5  \
-        ) \
-        LAYOUT( \
-            KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, KC_##R06, \
-            KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, KC_##R16, \
-            KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, KC_##R26, \
-            KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L36, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35, KC_##R36, \
-            KC_##LT0, KC_##LT1, KC_##LT2, KC_##LT3,           KC_##LT4, KC_##LT5, KC_##RT0, KC_##RT1,           KC_##RT2, KC_##RT3, KC_##RT4, KC_##RT5  \
-        )
-#endif // #ifdef KEYBOARD_ergodash_rev1
-
-#ifdef KEYBOARD_ergodash_rev2
-    #include "rev2.h"
-
     // Used to create a keymap using only KC_ prefixed keys
     #define LAYOUT_kc( \
         L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
@@ -41,7 +21,7 @@
             KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L36, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35, KC_##R36, \
             KC_##L40, KC_##L41, KC_##L42, KC_##L43, KC_##L44, KC_##L45, KC_##L46, KC_##R40, KC_##R41, KC_##R42, KC_##R43, KC_##R44, KC_##R45, KC_##R46  \
         )
-#endif // #ifdef KEYBOARD_ergodash_rev2
+#endif // #ifdef KEYBOARD_ergodash_rev1
 
 #ifdef KEYBOARD_ergodash_mini
     #include "mini.h"

keyboards/ergodash/i2c.c

@@ -1,162 +0,0 @@
-#include <util/twi.h>
-#include <avr/io.h>
-#include <stdlib.h>
-#include <avr/interrupt.h>
-#include <util/twi.h>
-#include <stdbool.h>
-#include "i2c.h"
-
-#ifdef USE_I2C
-
-// Limits the amount of we wait for any one i2c transaction.
-// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
-// 9 bits, a single transaction will take around 90μs to complete.
-//
-// (F_CPU/SCL_CLOCK)  =>  # of μC cycles to transfer a bit
-// poll loop takes at least 8 clock cycles to execute
-#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
-
-#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
-
-volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
-
-static volatile uint8_t slave_buffer_pos;
-static volatile bool slave_has_register_set = false;
-
-// Wait for an i2c operation to finish
-inline static
-void i2c_delay(void) {
-  uint16_t lim = 0;
-  while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
-    lim++;
-
-  // easier way, but will wait slightly longer
-  // _delay_us(100);
-}
-
-// Setup twi to run at 100kHz
-void i2c_master_init(void) {
-  // no prescaler
-  TWSR = 0;
-  // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
-  // Check datasheets for more info.
-  TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
-}
-
-// Start a transaction with the given i2c slave address. The direction of the
-// transfer is set with I2C_READ and I2C_WRITE.
-// returns: 0 => success
-//          1 => error
-uint8_t i2c_master_start(uint8_t address) {
-  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
-
-  i2c_delay();
-
-  // check that we started successfully
-  if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
-    return 1;
-
-  TWDR = address;
-  TWCR = (1<<TWINT) | (1<<TWEN);
-
-  i2c_delay();
-
-  if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
-    return 1; // slave did not acknowledge
-  else
-    return 0; // success
-}
-
-
-// Finish the i2c transaction.
-void i2c_master_stop(void) {
-  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-
-  uint16_t lim = 0;
-  while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
-    lim++;
-}
-
-// Write one byte to the i2c slave.
-// returns 0 => slave ACK
-//         1 => slave NACK
-uint8_t i2c_master_write(uint8_t data) {
-  TWDR = data;
-  TWCR = (1<<TWINT) | (1<<TWEN);
-
-  i2c_delay();
-
-  // check if the slave acknowledged us
-  return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
-}
-
-// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
-// if ack=0 the acknowledge bit is not set.
-// returns: byte read from i2c device
-uint8_t i2c_master_read(int ack) {
-  TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
-
-  i2c_delay();
-  return TWDR;
-}
-
-void i2c_reset_state(void) {
-  TWCR = 0;
-}
-
-void i2c_slave_init(uint8_t address) {
-  TWAR = address << 0; // slave i2c address
-  // TWEN  - twi enable
-  // TWEA  - enable address acknowledgement
-  // TWINT - twi interrupt flag
-  // TWIE  - enable the twi interrupt
-  TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
-}
-
-ISR(TWI_vect);
-
-ISR(TWI_vect) {
-  uint8_t ack = 1;
-  switch(TW_STATUS) {
-    case TW_SR_SLA_ACK:
-      // this device has been addressed as a slave receiver
-      slave_has_register_set = false;
-      break;
-
-    case TW_SR_DATA_ACK:
-      // this device has received data as a slave receiver
-      // The first byte that we receive in this transaction sets the location
-      // of the read/write location of the slaves memory that it exposes over
-      // i2c.  After that, bytes will be written at slave_buffer_pos, incrementing
-      // slave_buffer_pos after each write.
-      if(!slave_has_register_set) {
-        slave_buffer_pos = TWDR;
-        // don't acknowledge the master if this memory loctaion is out of bounds
-        if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
-          ack = 0;
-          slave_buffer_pos = 0;
-        }
-        slave_has_register_set = true;
-      } else {
-        i2c_slave_buffer[slave_buffer_pos] = TWDR;
-        BUFFER_POS_INC();
-      }
-      break;
-
-    case TW_ST_SLA_ACK:
-    case TW_ST_DATA_ACK:
-      // master has addressed this device as a slave transmitter and is
-      // requesting data.
-      TWDR = i2c_slave_buffer[slave_buffer_pos];
-      BUFFER_POS_INC();
-      break;
-
-    case TW_BUS_ERROR: // something went wrong, reset twi state
-      TWCR = 0;
-    default:
-      break;
-  }
-  // Reset everything, so we are ready for the next TWI interrupt
-  TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
-}
-#endif

keyboards/ergodash/i2c.h

@@ -1,49 +0,0 @@
-#ifndef I2C_H
-#define I2C_H
-
-#include <stdint.h>
-
-#ifndef F_CPU
-#define F_CPU 16000000UL
-#endif
-
-#define I2C_READ 1
-#define I2C_WRITE 0
-
-#define I2C_ACK 1
-#define I2C_NACK 0
-
-#define SLAVE_BUFFER_SIZE 0x10
-
-// i2c SCL clock frequency
-#define SCL_CLOCK  400000L
-
-extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
-
-void i2c_master_init(void);
-uint8_t i2c_master_start(uint8_t address);
-void i2c_master_stop(void);
-uint8_t i2c_master_write(uint8_t data);
-uint8_t i2c_master_read(int);
-void i2c_reset_state(void);
-void i2c_slave_init(uint8_t address);
-
-
-static inline unsigned char i2c_start_read(unsigned char addr) {
-  return i2c_master_start((addr << 1) | I2C_READ);
-}
-
-static inline unsigned char i2c_start_write(unsigned char addr) {
-  return i2c_master_start((addr << 1) | I2C_WRITE);
-}
-
-// from SSD1306 scrips
-extern unsigned char i2c_rep_start(unsigned char addr);
-extern void i2c_start_wait(unsigned char addr);
-extern unsigned char i2c_readAck(void);
-extern unsigned char i2c_readNak(void);
-extern unsigned char i2c_read(unsigned char ack);
-
-#define i2c_read(ack)  (ack) ? i2c_readAck() : i2c_readNak();
-
-#endif

keyboards/ergodash/matrix.c

@@ -1,490 +0,0 @@
-/*
-Copyright 2017 Danny Nguyen <danny@keeb.io>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include "wait.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "split_util.h"
-#include "pro_micro.h"
-#include "config.h"
-#include "timer.h"
-
-#ifdef BACKLIGHT_ENABLE
-    #include "backlight.h"
-    extern backlight_config_t backlight_config;
-#endif
-
-#ifdef USE_I2C
-#  include "i2c.h"
-#else // USE_SERIAL
-#  include "serial.h"
-#endif
-
-#ifndef DEBOUNCING_DELAY
-#   define DEBOUNCING_DELAY 5
-#endif
-
-#if (DEBOUNCING_DELAY > 0)
-    static uint16_t debouncing_time;
-    static bool debouncing = false;
-#endif
-
-#if (MATRIX_COLS <= 8)
-#    define print_matrix_header()  print("\nr/c 01234567\n")
-#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
-#    define matrix_bitpop(i)       bitpop(matrix[i])
-#    define ROW_SHIFTER ((uint8_t)1)
-#else
-#    error "Currently only supports 8 COLS"
-#endif
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-#define ERROR_DISCONNECT_COUNT 5
-
-#define SERIAL_LED_ADDR 0x00
-
-#define ROWS_PER_HAND (MATRIX_ROWS/2)
-
-static uint8_t error_count = 0;
-
-static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
-static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-#if (DIODE_DIRECTION == COL2ROW)
-    static void init_cols(void);
-    static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
-    static void unselect_rows(void);
-    static void select_row(uint8_t row);
-    static void unselect_row(uint8_t row);
-#elif (DIODE_DIRECTION == ROW2COL)
-    static void init_rows(void);
-    static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
-    static void unselect_cols(void);
-    static void unselect_col(uint8_t col);
-    static void select_col(uint8_t col);
-#endif
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
-    matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
-    matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void)
-{
-    return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
-    return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
-    debug_enable = true;
-    debug_matrix = true;
-    debug_mouse = true;
-    // initialize row and col
-#if (DIODE_DIRECTION == COL2ROW)
-    unselect_rows();
-    init_cols();
-#elif (DIODE_DIRECTION == ROW2COL)
-    unselect_cols();
-    init_rows();
-#endif
-
-    TX_RX_LED_INIT;
-
-    // initialize matrix state: all keys off
-    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
-        matrix[i] = 0;
-        matrix_debouncing[i] = 0;
-    }
-
-    matrix_init_quantum();
-
-}
-
-uint8_t _matrix_scan(void)
-{
-    int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
-#if (DIODE_DIRECTION == COL2ROW)
-    // Set row, read cols
-    for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
-#       if (DEBOUNCING_DELAY > 0)
-            bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row);
-
-            if (matrix_changed) {
-                debouncing = true;
-                debouncing_time = timer_read();
-                PORTD ^= (1 << 2);
-            }
-
-#       else
-            read_cols_on_row(matrix+offset, current_row);
-#       endif
-
-    }
-
-#elif (DIODE_DIRECTION == ROW2COL)
-    // Set col, read rows
-    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
-#       if (DEBOUNCING_DELAY > 0)
-            bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col);
-            if (matrix_changed) {
-                debouncing = true;
-                debouncing_time = timer_read();
-            }
-#       else
-             read_rows_on_col(matrix+offset, current_col);
-#       endif
-
-    }
-#endif
-
-#   if (DEBOUNCING_DELAY > 0)
-        if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
-            for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
-                matrix[i+offset] = matrix_debouncing[i+offset];
-            }
-            debouncing = false;
-        }
-#   endif
-
-    return 1;
-}
-
-#ifdef USE_I2C
-
-// Get rows from other half over i2c
-int i2c_transaction(void) {
-    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-
-    int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
-    if (err) goto i2c_error;
-
-    // start of matrix stored at 0x00
-    err = i2c_master_write(0x00);
-    if (err) goto i2c_error;
-
-#ifdef BACKLIGHT_ENABLE
-    // Write backlight level for slave to read
-    err = i2c_master_write(backlight_config.enable ? backlight_config.level : 0);
-#else
-    // Write zero, so our byte index is the same
-    err = i2c_master_write(0x00);
-#endif
-    if (err) goto i2c_error;
-
-    // Start read
-    err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
-    if (err) goto i2c_error;
-
-    if (!err) {
-        int i;
-        for (i = 0; i < ROWS_PER_HAND-1; ++i) {
-            matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
-        }
-        matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
-        i2c_master_stop();
-    } else {
-i2c_error: // the cable is disconnceted, or something else went wrong
-        i2c_reset_state();
-        return err;
-    }
-
-    return 0;
-}
-
-#else // USE_SERIAL
-
-int serial_transaction(void) {
-    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-
-    if (serial_update_buffers()) {
-        return 1;
-    }
-
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        matrix[slaveOffset+i] = serial_slave_buffer[i];
-    }
-
-#ifdef BACKLIGHT_ENABLE
-    // Write backlight level for slave to read
-    serial_master_buffer[SERIAL_LED_ADDR] = backlight_config.enable ? backlight_config.level : 0;
-#endif
-    return 0;
-}
-#endif
-
-uint8_t matrix_scan(void)
-{
-    uint8_t ret = _matrix_scan();
-
-#ifdef USE_I2C
-    if( i2c_transaction() ) {
-#else // USE_SERIAL
-    if( serial_transaction() ) {
-#endif
-        // turn on the indicator led when halves are disconnected
-        TXLED1;
-
-        error_count++;
-
-        if (error_count > ERROR_DISCONNECT_COUNT) {
-            // reset other half if disconnected
-            int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-            for (int i = 0; i < ROWS_PER_HAND; ++i) {
-                matrix[slaveOffset+i] = 0;
-            }
-        }
-    } else {
-        // turn off the indicator led on no error
-        TXLED0;
-        error_count = 0;
-    }
-    matrix_scan_quantum();
-    return ret;
-}
-
-void matrix_slave_scan(void) {
-    _matrix_scan();
-
-    int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
-
-#ifdef USE_I2C
-#ifdef BACKLIGHT_ENABLE
-    // Read backlight level sent from master and update level on slave
-    backlight_set(i2c_slave_buffer[0]);
-#endif
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        i2c_slave_buffer[i+1] = matrix[offset+i];
-    }
-#else // USE_SERIAL
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        serial_slave_buffer[i] = matrix[offset+i];
-    }
-
-#ifdef BACKLIGHT_ENABLE
-    // Read backlight level sent from master and update level on slave
-    backlight_set(serial_master_buffer[SERIAL_LED_ADDR]);
-#endif
-#endif
-}
-
-bool matrix_is_modified(void)
-{
-    if (debouncing) return false;
-    return true;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-    return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
-    return matrix[row];
-}
-
-void matrix_print(void)
-{
-    print("\nr/c 0123456789ABCDEF\n");
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        phex(row); print(": ");
-        pbin_reverse16(matrix_get_row(row));
-        print("\n");
-    }
-}
-
-uint8_t matrix_key_count(void)
-{
-    uint8_t count = 0;
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        count += bitpop16(matrix[i]);
-    }
-    return count;
-}
-
-#if (DIODE_DIRECTION == COL2ROW)
-
-static void init_cols(void)
-{
-    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
-        uint8_t pin = col_pins[x];
-        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-    }
-}
-
-static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
-{
-    // Store last value of row prior to reading
-    matrix_row_t last_row_value = current_matrix[current_row];
-
-    // Clear data in matrix row
-    current_matrix[current_row] = 0;
-
-    // Select row and wait for row selecton to stabilize
-    select_row(current_row);
-    wait_us(30);
-
-    // For each col...
-    for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
-
-        // Select the col pin to read (active low)
-        uint8_t pin = col_pins[col_index];
-        uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
-
-        // Populate the matrix row with the state of the col pin
-        current_matrix[current_row] |=  pin_state ? 0 : (ROW_SHIFTER << col_index);
-    }
-
-    // Unselect row
-    unselect_row(current_row);
-
-    return (last_row_value != current_matrix[current_row]);
-}
-
-static void select_row(uint8_t row)
-{
-    uint8_t pin = row_pins[row];
-    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
-    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
-}
-
-static void unselect_row(uint8_t row)
-{
-    uint8_t pin = row_pins[row];
-    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-}
-
-static void unselect_rows(void)
-{
-    for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
-        uint8_t pin = row_pins[x];
-        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-    }
-}
-
-#elif (DIODE_DIRECTION == ROW2COL)
-
-static void init_rows(void)
-{
-    for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
-        uint8_t pin = row_pins[x];
-        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-    }
-}
-
-static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
-{
-    bool matrix_changed = false;
-
-    // Select col and wait for col selecton to stabilize
-    select_col(current_col);
-    wait_us(30);
-
-    // For each row...
-    for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++)
-    {
-
-        // Store last value of row prior to reading
-        matrix_row_t last_row_value = current_matrix[row_index];
-
-        // Check row pin state
-        if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
-        {
-            // Pin LO, set col bit
-            current_matrix[row_index] |= (ROW_SHIFTER << current_col);
-        }
-        else
-        {
-            // Pin HI, clear col bit
-            current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
-        }
-
-        // Determine if the matrix changed state
-        if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
-        {
-            matrix_changed = true;
-        }
-    }
-
-    // Unselect col
-    unselect_col(current_col);
-
-    return matrix_changed;
-}
-
-static void select_col(uint8_t col)
-{
-    uint8_t pin = col_pins[col];
-    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
-    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
-}
-
-static void unselect_col(uint8_t col)
-{
-    uint8_t pin = col_pins[col];
-    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-}
-
-static void unselect_cols(void)
-{
-    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
-        uint8_t pin = col_pins[x];
-        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-    }
-}
-
-#endif

keyboards/ergodash/mini/config.h

@@ -45,10 +45,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define MATRIX_HAS_GHOST
 
 #define C6_AUDIO
-#ifdef AUDIO_ENABLE
-  #define STARTUP_SONG SONG(STARTUP_SOUND)
-  #define GOODBYE_SONG SONG(GOODBYE_SOUND)
-#endif
 
 /* number of backlight levels */
 #ifdef BACKLIGHT_ENABLE
@@ -68,23 +64,18 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 20
+#define RGBLIGHT_SPLIT
+#define RGBLED_SPLIT { 10, 10 }    // Number of LEDs
 
-#define RGBLED_NUM 20    // Number of LEDs
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-// #define NO_DEBUG
-
-/* disable print */
-// #define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
+#define SOFT_SERIAL_PIN D0
+#define SELECT_SOFT_SERIAL_SPEED 1
+/*Sets the protocol speed when using serial communication*/
+//Speeds:
+//0: about 189kbps (Experimental only)
+//1: about 137kbps (default)
+//2: about 75kbps
+//3: about 39kbps
+//4: about 26kbps
+//5: about 20kbps

keyboards/ergodash/mini/keymaps/default/config.h

@@ -20,6 +20,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
+
 /* Use I2C or Serial, not both */
 
 #define USE_SERIAL
@@ -30,10 +31,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MASTER_LEFT
 // #define MASTER_RIGHT
 // #define EE_HANDS
-
-#undef RGBLED_NUM
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 20
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-#define RGBLIGHT_VAL_STEP 17

keyboards/ergodash/mini/keymaps/default/rules.mk

@@ -0,0 +1,3 @@
+BACKLIGHT_ENABLE = no
+RGBLIGHT_ENABLE = no
+AUDIO_ENABLE = no

keyboards/ergodash/mini/rules.mk

@@ -1,2 +1,3 @@
 BACKLIGHT_ENABLE = no
 RGBLIGHT_ENABLE = no
+AUDIO_ENABLE = no

keyboards/ergodash/readme.md

@@ -9,16 +9,17 @@ Hardware Availability: Order your own [yourself](https://github.com/omkbd/ErgoDa
 
 Make example for this keyboard (after setting up your build environment):
 
-    make ergodash/rev2:default
+    make ergodash/rev1:default
 
 See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
 
 Install Example: (for pro micro)
-    `make ergodash/rev2:default:avrdude`
-  
+    `make ergodash/rev1:default:avrdude`
+
 Note:  
-  "rev2" is for PCB ver 1.1,1.2  
-  "rev1" is from earlier pcb
+  "rev1" is for PCB ver 1.0,1.1,1.2  
+  **The original Rev 1 was owned only by the designer. Therefore, Rev1 has been removed. Since the current PCB is Rev1, we changed Rev2 to Rev1 to match the firmware version.**
+
 
 # Layout
 ![layout](https://github.com/omkbd/picture/blob/master/ergodash-layout.png)

keyboards/ergodash/rev1/config.h

@@ -16,8 +16,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef REV1_CONFIG_H
-#define REV1_CONFIG_H
+#pragma once
 
 #include "config_common.h"
 
@@ -35,9 +34,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COLS 7
 
 // wiring of each half
-#define MATRIX_ROW_PINS { D7, E6, B4, B5, D4 }
-#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 }
-// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6 } //uncomment this line and comment line above if you need to reverse left-to-right key order
+#define MATRIX_ROW_PINS { D4, D7, E6, B4, B5 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
+// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
 
 /* define tapping term */
 #define TAPPING_TERM 120
@@ -45,8 +44,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
 
+#define C6_AUDIO
+
 /* number of backlight levels */
-// #define BACKLIGHT_LEVELS 3
+#ifdef BACKLIGHT_ENABLE
+  #define BACKLIGHT_PIN B6
+  #define BACKLIGHT_LEVELS 7
+//  #define BACKLIGHT_BREATHING
+//  #define BREATHING_PERIOD 4
+#endif
 
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCING_DELAY 5
@@ -58,25 +64,18 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 24
+#define RGBLIGHT_SPLIT
+#define RGBLED_SPLIT { 12, 12 }    // Number of LEDs
 
-#define RGBLED_NUM 24    // Number of LEDs
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-// #define NO_DEBUG
-
-/* disable print */
-// #define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif
+#define SOFT_SERIAL_PIN D0
+#define SELECT_SOFT_SERIAL_SPEED 1
+/*Sets the protocol speed when using serial communication*/
+//Speeds:
+//0: about 189kbps (Experimental only)
+//1: about 137kbps (default)
+//2: about 75kbps
+//3: about 39kbps
+//4: about 26kbps
+//5: about 20kbps

keyboards/ergodash/rev1/info.json

@@ -1,13 +1,13 @@
 {
-  "keyboard_name": "ErgoDash rev1",
+  "keyboard_name": "ErgoDash rev2",
   "url": "",
   "maintainer": "qmk",
-  "width": 16,
+  "width": 18,
   "height": 6.25,
   "layouts": {
     "LAYOUT": {
-      "key_count": 68,
-      "layout": [{"label":"L00", "x":0, "y":0.375}, {"label":"L01", "x":1, "y":0.375}, {"label":"L02", "x":2, "y":0.125}, {"label":"L03", "x":3, "y":0}, {"label":"L04", "x":4, "y":0.125}, {"label":"L05", "x":5, "y":0.25}, {"label":"L06", "x":6, "y":0.75}, {"label":"R00", "x":9, "y":0.75}, {"label":"R01", "x":10, "y":0.25}, {"label":"R02", "x":11, "y":0.125}, {"label":"R03", "x":12, "y":0}, {"label":"R04", "x":13, "y":0.125}, {"label":"R05", "x":14, "y":0.375}, {"label":"R06", "x":15, "y":0.375}, {"label":"L10", "x":0, "y":1.375}, {"label":"L11", "x":1, "y":1.375}, {"label":"L12", "x":2, "y":1.125}, {"label":"L13", "x":3, "y":1}, {"label":"L14", "x":4, "y":1.125}, {"label":"L15", "x":5, "y":1.25}, {"label":"L16", "x":6, "y":1.75}, {"label":"R10", "x":9, "y":1.75}, {"label":"R11", "x":10, "y":1.25}, {"label":"R12", "x":11, "y":1.125}, {"label":"R13", "x":12, "y":1}, {"label":"R14", "x":13, "y":1.125}, {"label":"R15", "x":14, "y":1.375}, {"label":"R16", "x":15, "y":1.375}, {"label":"L20", "x":0, "y":2.375}, {"label":"L21", "x":1, "y":2.375}, {"label":"L22", "x":2, "y":2.125}, {"label":"L23", "x":3, "y":2}, {"label":"L24", "x":4, "y":2.125}, {"label":"L25", "x":5, "y":2.25}, {"label":"L26", "x":6, "y":2.75}, {"label":"R20", "x":9, "y":2.75}, {"label":"R21", "x":10, "y":2.25}, {"label":"R22", "x":11, "y":2.125}, {"label":"R23", "x":12, "y":2}, {"label":"R24", "x":13, "y":2.125}, {"label":"R25", "x":14, "y":2.375}, {"label":"R26", "x":15, "y":2.375}, {"label":"L30", "x":0, "y":3.375}, {"label":"L31", "x":1, "y":3.375}, {"label":"L32", "x":2, "y":3.125}, {"label":"L33", "x":3, "y":3}, {"label":"L34", "x":4, "y":3.125}, {"label":"L35", "x":5, "y":3.25}, {"label":"L36", "x":6.5, "y":4.25}, {"label":"R30", "x":8.5, "y":4.25}, {"label":"R31", "x":10, "y":3.25}, {"label":"R32", "x":11, "y":3.125}, {"label":"R33", "x":12, "y":3}, {"label":"R34", "x":13, "y":3.125}, {"label":"R35", "x":14, "y":3.375}, {"label":"R36", "x":15, "y":3.375}, {"label":"LT0", "x":0, "y":4.375}, {"label":"LT1", "x":1, "y":4.375}, {"label":"LT2", "x":2, "y":4.125}, {"label":"LT3", "x":3, "y":4}, {"label":"LT4", "x":5.5, "y":5.25}, {"label":"LT5", "x":6.5, "y":5.25}, {"label":"RT0", "x":8.5, "y":5.25}, {"label":"RT1", "x":9.5, "y":5.25}, {"label":"RT2", "x":12, "y":4}, {"label":"RT3", "x":13, "y":4.125}, {"label":"RT4", "x":14, "y":4.375}, {"label":"RT5", "x":15, "y":4.375}]
+      "key_count": 70,
+      "layout": [{"label":"L00", "x":0, "y":0.375}, {"label":"L01", "x":1, "y":0.375}, {"label":"L02", "x":2, "y":0.125}, {"label":"L03", "x":3, "y":0}, {"label":"L04", "x":4, "y":0.125}, {"label":"L05", "x":5, "y":0.25}, {"label":"L06", "x":6, "y":0.75}, {"label":"R00", "x":11, "y":0.75}, {"label":"R01", "x":12, "y":0.25}, {"label":"R02", "x":13, "y":0.125}, {"label":"R03", "x":14, "y":0}, {"label":"R04", "x":15, "y":0.125}, {"label":"R05", "x":16, "y":0.375}, {"label":"R06", "x":17, "y":0.375}, {"label":"L10", "x":0, "y":1.375}, {"label":"L11", "x":1, "y":1.375}, {"label":"L12", "x":2, "y":1.125}, {"label":"L13", "x":3, "y":1}, {"label":"L14", "x":4, "y":1.125}, {"label":"L15", "x":5, "y":1.25}, {"label":"L16", "x":6, "y":1.75}, {"label":"R10", "x":11, "y":1.75}, {"label":"R11", "x":12, "y":1.25}, {"label":"R12", "x":13, "y":1.125}, {"label":"R13", "x":14, "y":1}, {"label":"R14", "x":15, "y":1.125}, {"label":"R15", "x":16, "y":1.375}, {"label":"R16", "x":17, "y":1.375}, {"label":"L20", "x":0, "y":2.375}, {"label":"L21", "x":1, "y":2.375}, {"label":"L22", "x":2, "y":2.125}, {"label":"L23", "x":3, "y":2}, {"label":"L24", "x":4, "y":2.125}, {"label":"L25", "x":5, "y":2.25}, {"label":"L26", "x":6, "y":2.75}, {"label":"R20", "x":11, "y":2.75}, {"label":"R21", "x":12, "y":2.25}, {"label":"R22", "x":13, "y":2.125}, {"label":"R23", "x":14, "y":2}, {"label":"R24", "x":15, "y":2.125}, {"label":"R25", "x":16, "y":2.375}, {"label":"R26", "x":17, "y":2.375}, {"label":"L30", "x":0, "y":3.375}, {"label":"L31", "x":1, "y":3.375}, {"label":"L32", "x":2, "y":3.125}, {"label":"L33", "x":3, "y":3}, {"label":"L34", "x":4, "y":3.125}, {"label":"L35", "x":5, "y":3.25}, {"label":"L36", "x":6.5, "y":4.25}, {"label":"R30", "x":10.5, "y":4.25}, {"label":"R31", "x":12, "y":3.25}, {"label":"R32", "x":13, "y":3.125}, {"label":"R33", "x":14, "y":3}, {"label":"R34", "x":15, "y":3.125}, {"label":"R35", "x":16, "y":3.375}, {"label":"R36", "x":17, "y":3.375}, {"label":"L40", "x":0, "y":4.375}, {"label":"L41", "x":1, "y":4.375}, {"label":"L42", "x":2, "y":4.125}, {"label":"L43", "x":3, "y":4}, {"label":"L44", "x":5.5, "y":5.25}, {"label":"L45", "x":6.5, "y":5.25}, {"label":"L46", "x":7.5, "y":4.25, "h":2}, {"label":"R40", "x":9.5, "y":4.25, "h":2}, {"label":"R41", "x":10.5, "y":5.25}, {"label":"R42", "x":11.5, "y":5.25}, {"label":"R43", "x":14, "y":4}, {"label":"R44", "x":15, "y":4.125}, {"label":"R45", "x":16, "y":4.375}, {"label":"R46", "x":17, "y":4.375}]
     }
   }
 }

keyboards/ergodash/rev1/keymaps/default/config.h

@@ -20,7 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-// place overrides here
 
 /* Use I2C or Serial, not both */
 
@@ -32,10 +31,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MASTER_LEFT
 // #define MASTER_RIGHT
 // #define EE_HANDS
-
-#undef RGBLED_NUM
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 24
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-#define RGBLIGHT_VAL_STEP 17

keyboards/ergodash/rev1/keymaps/default/keymap.c

@@ -14,92 +14,92 @@ enum custom_keycodes {
   ADJUST,
 };
 
-#define KC_JPN LALT(KC_GRV)
+#define EISU LALT(KC_GRV)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   /* Qwerty
-   * ,-------------------------------------------------------------------------------------------------.
-   * | ESC  |   1  |   2  |   3  |   4  |   5  |   [  |   ]  |   6  |   7  |   8  |   9  |   0  | Caps |
-   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-   * |  `   |   Q  |   W  |   E  |   R  |   T  |   -  |   =  |   Y  |   U  |   I  |   O  |   P  |  \   |
-   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-   * | Tab  |   A  |   S  |   D  |   F  |   G  |  Del | Bksp |   H  |   J  |   K  |   L  |   ;  |  "   |
-   * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
-   * | Shift|   Z  |   X  |   C  |   V  |   B  |  JPN | Enter|   N  |   M  |   ,  |   .  |   /  | Shift|
-   * `-------------+------+------+------+------+------+------+------+------+------+------+-------------'
-   * | Ctrl |  GUI |  ALt |Adjust|      |Lower | Space |Enter |Raise|      |  Left| Down |  Up  | Right|
-   * ,-------------------------------------------------------------------------------------------------.
+   * ,----------------------------------------------------------------------------------------------------------------------.
+   * | ESC  |   1  |   2  |   3  |   4  |   5  |   [  |                    |   ]  |   6  |   7  |   8  |   9  |   0  |Pscree|
+   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
+   * |  `   |   Q  |   W  |   E  |   R  |   T  |   -  |                    |   =  |   Y  |   U  |   I  |   O  |   P  |  \   |
+   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
+   * | Tab  |   A  |   S  |   D  |   F  |   G  |  Del |                    | Bksp |   H  |   J  |   K  |   L  |   ;  |  "   |
+   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
+   * | Shift|   Z  |   X  |   C  |   V  |   B  | Space|                    | Enter|   N  |   M  |   ,  |   .  |   /  | Shift|
+   * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
+   * | Ctrl |  GUI |  ALt | EISU |||||||| Lower| Space|  Del |||||||| Bksp | Enter| Raise|||||||| Left | Down |  Up  | Right|
+   * ,----------------------------------------------------------------------------------------------------------------------.
    */
   [_QWERTY] = LAYOUT( \
-    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_LBRC,       KC_RBRC, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_CAPS, \
-    KC_GRV,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_MINS,       KC_EQL , KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSLS, \
-    KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_DEL ,       KC_BSPC, KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
-    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_JPN ,       KC_ENT , KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, \
-    KC_LCTL, KC_LGUI, KC_LALT, ADJUST,           LOWER,   KC_SPC ,       KC_ENT , RAISE,            KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT  \
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_LBRC,                        KC_RBRC, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_PSCR, \
+    KC_GRV,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_MINS,                        KC_EQL , KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSLS, \
+    KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_DEL ,                        KC_BSPC, KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_SPC ,                        KC_ENT , KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, \
+    KC_LCTL, KC_LGUI, KC_LALT, EISU,             LOWER,   KC_SPC ,KC_DEL,         KC_BSPC,KC_ENT , RAISE,            KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT  \
   ),
 
   /* Lower
-   * ,-------------------------------------------------------------------------------------------------.
-   * | F11  |  F1  |  F2  |  F3  |  F4  |  F5  |   {  |   }  |  F6  |  F7  |  F8  |  F9  |  F10 | F12  |
-   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-   * |  ~   |   !  |   @  |   #  |   $  |   %  |   _  |   +  |   ^  |   &  |   *  |   (  |   )  |  |   |
-   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-   * | Tab  |   1  |   2  |   3  |   4  |   5  |  Del | Bksp |   H  |   J  |   K  |   L  |   :  |  "   |
-   * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
-   * | Shift|   6  |   7  |   8  |   9  |   0  |  JPN | Enter|   N  |   M  |   <  |   >  |   ?  | Shift|
-   * `-------------+------+------+------+------+------+------+------+------+------+------+-------------'
-   * | Ctrl |  GUI |  ALt |Adjust|      |Lower | Space |Enter |Raise|      | Home |PageDn|PageUp|  End |
-   * ,-------------------------------------------------------------------------------------------------.
+   * ,----------------------------------------------------------------------------------------------------------------------.
+   * |  F11 |  F1  |  F2  |  F3  |  F4  |  F5  |   {  |                    |   }  |  F6  |  F7  |  F8  |  F9  |  F10 |  F12 |
+   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
+   * |  ~   |   !  |   @  |   #  |   $  |   %  |   _  |                    |   +  |   ^  |   &  |   *  |   (  |   )  |  |   |
+   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
+   * | Tab  |   1  |   2  |   3  |   4  |   5  |  Del |                    | Bksp |   H  |   J  |   K  |   L  |   :  |  "   |
+   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
+   * | Shift|   6  |   7  |   8  |   9  |   0  | Space|                    | Enter|   N  |   M  |   <  |   >  |   ?  | Shift|
+   * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
+   * | Ctrl |  GUI |  ALt | EISU |||||||| Lower| Space|  Del |||||||| Bksp | Enter| Raise|||||||| Home |PageDn|PageUp|  End |
+   * ,----------------------------------------------------------------------------------------------------------------------.
    */
   [_LOWER] = LAYOUT(
-    KC_F11,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_LCBR,       KC_RCBR, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F12,  \
-    KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_UNDS,       KC_PLUS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, \
-    KC_TAB,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_DEL ,       KC_BSPC, KC_H,    KC_J,    KC_K,    KC_L,    KC_COLN, KC_DQT , \
-    KC_LSFT, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_JPN ,       KC_ENT , KC_N,    KC_M,    KC_LT,   KC_GT,   KC_QUES, KC_RSFT, \
-    KC_LCTL, KC_LGUI, KC_LALT, ADJUST,           LOWER,   KC_SPC ,       KC_ENT , RAISE,            KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
+    KC_F11,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_LCBR,                        KC_RCBR, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F12,  \
+    KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_UNDS,                        KC_PLUS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, \
+    KC_TAB,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_DEL ,                        KC_BSPC, KC_H,    KC_J,    KC_K,    KC_L,    KC_COLN, KC_DQT , \
+    KC_LSFT, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_SPC ,                        KC_ENT , KC_N,    KC_M,    KC_LT,   KC_GT,   KC_QUES, KC_RSFT, \
+    KC_LCTL, KC_LGUI, KC_LALT, EISU,             LOWER,   KC_SPC ,KC_DEL,         KC_BSPC,KC_ENT , RAISE,            KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
   ),
 
   /* Raise
-   * ,-------------------------------------------------------------------------------------------------.
-   * | F11  |  F1  |  F2  |  F3  |  F4  |  F5  |   {  |   }  |  F6  |  F7  |  F8  |  F9  |  F10 | F12  |
-   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-   * |  ~   |   !  |   @  |   #  |   $  |   %  |   _  |   +  |   ^  |   &  |   *  |   (  |   )  |  |   |
-   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-   * | Tab  |   1  |   2  |   3  |   4  |   5  |  Del | Bksp |   H  |   J  |   K  |   L  |   :  |  "   |
-   * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
-   * | Shift|   6  |   7  |   8  |   9  |   0  |  JPN | Enter|   N  |   M  |   <  |   >  |   ?  | Shift|
-   * `-------------+------+------+------+------+------+------+------+------+------+------+-------------'
-   * | Ctrl |  GUI |  ALt |Adjust|      |Lower | Space |Enter |Raise|      | Home |PageDn|PageUp|  End |
-   * ,-------------------------------------------------------------------------------------------------.
+   * ,----------------------------------------------------------------------------------------------------------------------.
+   * |  F11 |  F1  |  F2  |  F3  |  F4  |  F5  |   {  |                    |   }  |  F6  |  F7  |  F8  |  F9  |  F10 |  F12 |
+   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
+   * |  ~   |   !  |   @  |   #  |   $  |   %  |   _  |                    |   +  |   ^  |   &  |   *  |   (  |   )  |  |   |
+   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
+   * | Tab  |   1  |   2  |   3  |   4  |   5  |  Del |                    | Bksp |   H  |   J  |   K  |   L  |   :  |  "   |
+   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
+   * | Shift|   6  |   7  |   8  |   9  |   0  | Space|                    | Enter|   N  |   M  |   <  |   >  |   ?  | Shift|
+   * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
+   * | Ctrl |  GUI |  ALt | EISU |||||||| Lower| Space|  Del |||||||| Bksp | Enter| Raise|||||||| Home |PageDn|PageUp|  End |
+   * ,----------------------------------------------------------------------------------------------------------------------.
    */
   [_RAISE] = LAYOUT(
-    KC_F11,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_LCBR,       KC_RCBR, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F12,  \
-    KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_UNDS,       KC_PLUS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, \
-    KC_TAB,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_DEL ,       KC_BSPC, KC_H,    KC_J,    KC_K,    KC_L,    KC_COLN, KC_DQT , \
-    KC_LSFT, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_JPN ,       KC_ENT , KC_N,    KC_M,    KC_LT,   KC_GT,   KC_QUES, KC_RSFT, \
-    KC_LCTL, KC_LGUI, KC_LALT, ADJUST,           LOWER,   KC_SPC ,       KC_ENT , RAISE,            KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
+    KC_F11,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_LCBR,                        KC_RCBR, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F12,  \
+    KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_UNDS,                        KC_PLUS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, \
+    KC_TAB,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_DEL ,                        KC_BSPC, KC_H,    KC_J,    KC_K,    KC_L,    KC_COLN, KC_DQT , \
+    KC_LSFT, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_SPC ,                        KC_ENT , KC_N,    KC_M,    KC_LT,   KC_GT,   KC_QUES, KC_RSFT, \
+    KC_LCTL, KC_LGUI, KC_LALT, EISU,             LOWER,   KC_SPC ,KC_DEL,         KC_BSPC,KC_ENT , RAISE,            KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
   ),
 
   /* Adjust
-   * ,-------------------------------------------------------------------------------------------------.
-   * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
-   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-   * |      | Reset|RGB ON|  MODE|  HUE-|  HUE+|      |      |  SAT-|  SAT+|  VAL-|  VAL+|      |      |
-   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-   * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
-   * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
-   * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
-   * `-------------+------+------+------+------+------+------+------+------+------+------+-------------'
-   * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
-   * ,-------------------------------------------------------------------------------------------------.
+   * ,----------------------------------------------------------------------------------------------------------------------.
+   * |      |      |      |      |      |      |      |                    |      |      |      |      |      |      |      |
+   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
+   * |      | Reset|RGB ON|  MODE|  HUE-|  HUE+|      |                    |      |  SAT-|  SAT+|  VAL-|  VAL+|      |      |
+   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
+   * |      |      | BL ON|  BRTG|  INC|   DEC|      |                    |      |      |      |      |      |      |      |
+   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |                    |      |      |      |      |      |      |      |
+   * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
+   * |      |      |      |      ||||||||      |      |      ||||||||      |      |      ||||||||      |      |      |      |
+   * ,----------------------------------------------------------------------------------------------------------------------.
    */
   [_ADJUST] = LAYOUT(
-    _______, _______, _______, _______, _______, _______,_______,       _______, _______, _______, _______, _______, _______, _______, \
-    _______, RESET  , RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI,_______,       _______, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, _______, \
-    _______, _______, _______, _______, _______, _______,_______,       _______, _______, _______, _______, _______, _______, _______, \
-    _______, _______, _______, _______, _______, _______,_______,       _______, _______, _______, _______, _______, _______, _______, \
-    _______, _______, _______, _______,          _______,_______,       _______, _______,          _______, _______, _______, _______ \
+    _______, _______, _______, _______, _______, _______,_______,                       _______, _______, _______, _______, _______, _______, _______, \
+    _______, RESET  , RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI,_______,                       _______, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, _______, \
+    _______, _______, BL_TOGG, BL_BRTG, BL_INC , BL_DEC ,_______,                       _______, _______, _______, _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______,_______,                       _______, _______, _______, _______, _______, _______, _______, \
+    _______, _______, _______, _______,          _______,_______,_______,       _______,_______, _______,          _______, _______, _______, _______  \
   )
 };
 

keyboards/ergodash/rev1/keymaps/default/rules.mk

@@ -0,0 +1,3 @@
+BACKLIGHT_ENABLE = no
+RGBLIGHT_ENABLE = no
+AUDIO_ENABLE = no

keyboards/ergodash/rev1/keymaps/greenshadowmaker/config.h

@@ -31,11 +31,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MASTER_LEFT
 // #define MASTER_RIGHT
 // #define EE_HANDS
-
-
-#undef RGBLED_NUM
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 24
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-#define RGBLIGHT_VAL_STEP 17

keyboards/ergodash/rev1/rev1.h

@@ -25,19 +25,19 @@
 	L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
 	L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
 	L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36, \
-	LT0, LT1, LT2, LT3,      LT4, LT5, RT0, RT1,      RT2, RT3, RT4, RT5  \
+	L40, L41, L42, L43, L44, L45, L46, R40, R41, R42, R43, R44, R45, R46  \
 	) \
 	{ \
-		{ L00, L01, L02, L03, L04, L05, L06   }, \
-		{ L10, L11, L12, L13, L14, L15, L16   }, \
-		{ L20, L21, L22, L23, L24, L25, L26   }, \
-		{ L30, L31, L32, L33, L34, L35, L36   }, \
-		{ LT0, LT1, LT2, LT3, LT4, LT5, KC_NO }, \
-		{ R06, R05, R04, R03, R02, R01, R00   }, \
-		{ R16, R15, R14, R13, R12, R11, R10   }, \
-		{ R26, R25, R24, R23, R22, R21, R20   }, \
-		{ R36, R35, R34, R33, R32, R31, R30   }, \
-		{ RT5, RT4, RT3, RT2, RT1, RT0, KC_NO } \
+		{ L00, L01, L02, L03, L04, L05, L06 }, \
+		{ L10, L11, L12, L13, L14, L15, L16 }, \
+		{ L20, L21, L22, L23, L24, L25, L26 }, \
+		{ L30, L31, L32, L33, L34, L35, L36 }, \
+		{ L40, L41, L42, L43, L44, L45, L46 }, \
+		{ R06, R05, R04, R03, R02, R01, R00 }, \
+		{ R16, R15, R14, R13, R12, R11, R10 }, \
+		{ R26, R25, R24, R23, R22, R21, R20 }, \
+		{ R36, R35, R34, R33, R32, R31, R30 }, \
+		{ R46, R45, R44, R43, R42, R41, R40 }  \
 	}
 #else
 // Keymap with right side flipped
@@ -47,19 +47,19 @@
 	L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
 	L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
 	L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36, \
-	LT0, LT1, LT2, LT3,      LT4, LT5, RT0, RT1,      RT2, RT3, RT4, RT5  \
+	L40, L41, L42, L43, L44, L45, L46, R40, R41, R42, R43, R44, R45, R46  \
 	) \
 	{ \
-		{ L00, L01, L02, L03, L04, L05, L06   }, \
-		{ L10, L11, L12, L13, L14, L15, L16   }, \
-		{ L20, L21, L22, L23, L24, L25, L26   }, \
-		{ L30, L31, L32, L33, L34, L35, L36   }, \
-		{ LT0, LT1, LT2, LT3, LT4, LT5, KC_NO }, \
-		{ R00, R01, R02, R03, R04, R05, R06   }, \
-		{ R10, R11, R12, R13, R14, R15, R16   }, \
-		{ R20, R21, R22, R23, R24, R25, R26   }, \
-		{ R30, R31, R32, R33, R34, R35, R36   }, \
-		{ RT0, RT1, RT2, RT3, RT4, RT5, KC_NO } \
+		{ L00, L01, L02, L03, L04, L05, L06 }, \
+		{ L10, L11, L12, L13, L14, L15, L16 }, \
+		{ L20, L21, L22, L23, L24, L25, L26 }, \
+		{ L30, L31, L32, L33, L34, L35, L36 }, \
+		{ L40, L41, L42, L43, L44, L45, L46 }, \
+		{ R00, R01, R02, R03, R04, R05, R06 }, \
+		{ R10, R11, R12, R13, R14, R15, R16 }, \
+		{ R20, R21, R22, R23, R24, R25, R26 }, \
+		{ R30, R31, R32, R33, R34, R35, R36 }, \
+		{ R40, R41, R42, R43, R44, R45, R46 }  \
 	}
 #endif
 

keyboards/ergodash/rev1/rules.mk

@@ -1 +1,3 @@
 BACKLIGHT_ENABLE = no
+RGBLIGHT_ENABLE = no
+AUDIO_ENABLE = no

keyboards/ergodash/rev2/info.json

@@ -1,13 +0,0 @@
-{
-  "keyboard_name": "ErgoDash rev2",
-  "url": "",
-  "maintainer": "qmk",
-  "width": 18,
-  "height": 6.25,
-  "layouts": {
-    "LAYOUT": {
-      "key_count": 70,
-      "layout": [{"label":"L00", "x":0, "y":0.375}, {"label":"L01", "x":1, "y":0.375}, {"label":"L02", "x":2, "y":0.125}, {"label":"L03", "x":3, "y":0}, {"label":"L04", "x":4, "y":0.125}, {"label":"L05", "x":5, "y":0.25}, {"label":"L06", "x":6, "y":0.75}, {"label":"R00", "x":11, "y":0.75}, {"label":"R01", "x":12, "y":0.25}, {"label":"R02", "x":13, "y":0.125}, {"label":"R03", "x":14, "y":0}, {"label":"R04", "x":15, "y":0.125}, {"label":"R05", "x":16, "y":0.375}, {"label":"R06", "x":17, "y":0.375}, {"label":"L10", "x":0, "y":1.375}, {"label":"L11", "x":1, "y":1.375}, {"label":"L12", "x":2, "y":1.125}, {"label":"L13", "x":3, "y":1}, {"label":"L14", "x":4, "y":1.125}, {"label":"L15", "x":5, "y":1.25}, {"label":"L16", "x":6, "y":1.75}, {"label":"R10", "x":11, "y":1.75}, {"label":"R11", "x":12, "y":1.25}, {"label":"R12", "x":13, "y":1.125}, {"label":"R13", "x":14, "y":1}, {"label":"R14", "x":15, "y":1.125}, {"label":"R15", "x":16, "y":1.375}, {"label":"R16", "x":17, "y":1.375}, {"label":"L20", "x":0, "y":2.375}, {"label":"L21", "x":1, "y":2.375}, {"label":"L22", "x":2, "y":2.125}, {"label":"L23", "x":3, "y":2}, {"label":"L24", "x":4, "y":2.125}, {"label":"L25", "x":5, "y":2.25}, {"label":"L26", "x":6, "y":2.75}, {"label":"R20", "x":11, "y":2.75}, {"label":"R21", "x":12, "y":2.25}, {"label":"R22", "x":13, "y":2.125}, {"label":"R23", "x":14, "y":2}, {"label":"R24", "x":15, "y":2.125}, {"label":"R25", "x":16, "y":2.375}, {"label":"R26", "x":17, "y":2.375}, {"label":"L30", "x":0, "y":3.375}, {"label":"L31", "x":1, "y":3.375}, {"label":"L32", "x":2, "y":3.125}, {"label":"L33", "x":3, "y":3}, {"label":"L34", "x":4, "y":3.125}, {"label":"L35", "x":5, "y":3.25}, {"label":"L36", "x":6.5, "y":4.25}, {"label":"R30", "x":10.5, "y":4.25}, {"label":"R31", "x":12, "y":3.25}, {"label":"R32", "x":13, "y":3.125}, {"label":"R33", "x":14, "y":3}, {"label":"R34", "x":15, "y":3.125}, {"label":"R35", "x":16, "y":3.375}, {"label":"R36", "x":17, "y":3.375}, {"label":"L40", "x":0, "y":4.375}, {"label":"L41", "x":1, "y":4.375}, {"label":"L42", "x":2, "y":4.125}, {"label":"L43", "x":3, "y":4}, {"label":"L44", "x":5.5, "y":5.25}, {"label":"L45", "x":6.5, "y":5.25}, {"label":"L46", "x":7.5, "y":4.25, "h":2}, {"label":"R40", "x":9.5, "y":4.25, "h":2}, {"label":"R41", "x":10.5, "y":5.25}, {"label":"R42", "x":11.5, "y":5.25}, {"label":"R43", "x":14, "y":4}, {"label":"R44", "x":15, "y":4.125}, {"label":"R45", "x":16, "y":4.375}, {"label":"R46", "x":17, "y":4.375}]
-    }
-  }
-}

keyboards/ergodash/rev2/keymaps/default/keymap.c

@@ -1,154 +0,0 @@
-#include QMK_KEYBOARD_H
-
-extern keymap_config_t keymap_config;
-
-#define _QWERTY 0
-#define _LOWER 1
-#define _RAISE 2
-#define _ADJUST 16
-
-enum custom_keycodes {
-  QWERTY = SAFE_RANGE,
-  LOWER,
-  RAISE,
-  ADJUST,
-};
-
-#define EISU LALT(KC_GRV)
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-  /* Qwerty
-   * ,----------------------------------------------------------------------------------------------------------------------.
-   * | ESC  |   1  |   2  |   3  |   4  |   5  |   [  |                    |   ]  |   6  |   7  |   8  |   9  |   0  |Pscree|
-   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
-   * |  `   |   Q  |   W  |   E  |   R  |   T  |   -  |                    |   =  |   Y  |   U  |   I  |   O  |   P  |  \   |
-   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
-   * | Tab  |   A  |   S  |   D  |   F  |   G  |  Del |                    | Bksp |   H  |   J  |   K  |   L  |   ;  |  "   |
-   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
-   * | Shift|   Z  |   X  |   C  |   V  |   B  | Space|                    | Enter|   N  |   M  |   ,  |   .  |   /  | Shift|
-   * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
-   * | Ctrl |  GUI |  ALt | EISU |||||||| Lower| Space|      ||||||||      | Enter| Raise|||||||| Left | Down |  Up  | Right|
-   * ,----------------------------------------------------------------------------------------------------------------------.
-   */
-  [_QWERTY] = LAYOUT( \
-    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_LBRC,                        KC_RBRC, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_PSCR, \
-    KC_GRV,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_MINS,                        KC_EQL , KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSLS, \
-    KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_DEL ,                        KC_BSPC, KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
-    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_SPC ,                        KC_ENT , KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, \
-    KC_LCTL, KC_LGUI, KC_LALT, EISU,             LOWER,   KC_SPC ,KC_SPC,          KC_SPC,KC_ENT , RAISE,            KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT  \
-  ),
-
-  /* Lower
-   * ,----------------------------------------------------------------------------------------------------------------------.
-   * |  F11 |  F1  |  F2  |  F3  |  F4  |  F5  |   {  |                    |   }  |  F6  |  F7  |  F8  |  F9  |  F10 |  F12 |
-   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
-   * |  ~   |   !  |   @  |   #  |   $  |   %  |   _  |                    |   +  |   ^  |   &  |   *  |   (  |   )  |  |   |
-   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
-   * | Tab  |   1  |   2  |   3  |   4  |   5  |  Del |                    | Bksp |   H  |   J  |   K  |   L  |   :  |  "   |
-   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
-   * | Shift|   6  |   7  |   8  |   9  |   0  | Space|                    | Enter|   N  |   M  |   <  |   >  |   ?  | Shift|
-   * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
-   * | Ctrl |  GUI |  ALt | EISU |||||||| Lower| Space|      ||||||||      | Enter| Raise|||||||| Home |PageDn|PageUp|  End |
-   * ,----------------------------------------------------------------------------------------------------------------------.
-   */
-  [_LOWER] = LAYOUT(
-    KC_F11,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_LCBR,                        KC_RCBR, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F12,  \
-    KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_UNDS,                        KC_PLUS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, \
-    KC_TAB,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_DEL ,                        KC_BSPC, KC_H,    KC_J,    KC_K,    KC_L,    KC_COLN, KC_DQT , \
-    KC_LSFT, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_SPC ,                        KC_ENT , KC_N,    KC_M,    KC_LT,   KC_GT,   KC_QUES, KC_RSFT, \
-    KC_LCTL, KC_LGUI, KC_LALT, EISU,             LOWER,   KC_SPC ,KC_SPC,          KC_SPC,KC_ENT , RAISE,            KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
-  ),
-
-  /* Raise
-   * ,----------------------------------------------------------------------------------------------------------------------.
-   * |  F11 |  F1  |  F2  |  F3  |  F4  |  F5  |   {  |                    |   }  |  F6  |  F7  |  F8  |  F9  |  F10 |  F12 |
-   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
-   * |  ~   |   !  |   @  |   #  |   $  |   %  |   _  |                    |   +  |   ^  |   &  |   *  |   (  |   )  |  |   |
-   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
-   * | Tab  |   1  |   2  |   3  |   4  |   5  |  Del |                    | Bksp |   H  |   J  |   K  |   L  |   :  |  "   |
-   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
-   * | Shift|   6  |   7  |   8  |   9  |   0  | Space|                    | Enter|   N  |   M  |   <  |   >  |   ?  | Shift|
-   * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
-   * | Ctrl |  GUI |  ALt | EISU |||||||| Lower| Space|      ||||||||      | Enter| Raise|||||||| Home |PageDn|PageUp|  End |
-   * ,----------------------------------------------------------------------------------------------------------------------.
-   */
-  [_RAISE] = LAYOUT(
-    KC_F11,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_LCBR,                        KC_RCBR, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F12,  \
-    KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_UNDS,                        KC_PLUS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, \
-    KC_TAB,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_DEL ,                        KC_BSPC, KC_H,    KC_J,    KC_K,    KC_L,    KC_COLN, KC_DQT , \
-    KC_LSFT, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_SPC ,                        KC_ENT , KC_N,    KC_M,    KC_LT,   KC_GT,   KC_QUES, KC_RSFT, \
-    KC_LCTL, KC_LGUI, KC_LALT, EISU,             LOWER,   KC_SPC ,KC_SPC,          KC_SPC,KC_ENT , RAISE,            KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
-  ),
-
-  /* Adjust
-   * ,----------------------------------------------------------------------------------------------------------------------.
-   * |      |      |      |      |      |      |      |                    |      |      |      |      |      |      |      |
-   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
-   * |      | Reset|RGB ON|  MODE|  HUE-|  HUE+|      |                    |      |  SAT-|  SAT+|  VAL-|  VAL+|      |      |
-   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
-   * |      |      |      |      |      |      |      |                    |      |      |      |      |      |      |      |
-   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
-   * |      |      |      |      |      |      |      |                    |      |      |      |      |      |      |      |
-   * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
-   * |      |      |      |      ||||||||      |      |      ||||||||      |      |      ||||||||      |      |      |      |
-   * ,----------------------------------------------------------------------------------------------------------------------.
-   */
-  [_ADJUST] = LAYOUT(
-    _______, _______, _______, _______, _______, _______,_______,                       _______, _______, _______, _______, _______, _______, _______, \
-    _______, RESET  , RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI,_______,                       _______, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, _______, \
-    _______, _______, BL_TOGG, BL_BRTG, BL_INC , BL_DEC ,_______,                       _______, _______, _______, _______, _______, _______, _______, \
-    _______, _______, _______, _______, _______, _______,_______,                       _______, _______, _______, _______, _______, _______, _______, \
-    _______, _______, _______, _______,          _______,_______,_______,       _______,_______, _______,          _______, _______, _______, _______  \
-  )
-};
-
-#ifdef AUDIO_ENABLE
-float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
-#endif
-
-void persistent_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case QWERTY:
-      if (record->event.pressed) {
-         print("mode just switched to qwerty and this is a huge string\n");
-        set_single_persistent_default_layer(_QWERTY);
-      }
-      return false;
-      break;
-    case LOWER:
-      if (record->event.pressed) {
-        layer_on(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case RAISE:
-      if (record->event.pressed) {
-        layer_on(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case ADJUST:
-      if (record->event.pressed) {
-        layer_on(_ADJUST);
-      } else {
-        layer_off(_ADJUST);
-      }
-      return false;
-      break;
-  }
-  return true;
-}