Update build instructions and Dockerfile to download submodules

* Initial commit of RAMA KOYU

* Changed default layout

* removed IS_COMMAND()

Dockerfile

@@ -26,4 +26,4 @@ VOLUME /qmk_firmware
 WORKDIR /qmk_firmware
 COPY . .
 
-CMD make $KEYBOARD:$KEYMAP
+CMD make clean ; make git-submodule ; make $KEYBOARD:$KEYMAP

docs/getting_started_build_tools.md

@@ -2,6 +2,8 @@
 
 This page describes setting up the build environment for QMK. These instructions cover AVR processors (such as the atmega32u4).
 
+After cloning the repo of QMK run `make git-submodule` once to download 3rd party libraries like ChibiOS.
+
 <!-- FIXME: We should have ARM instructions somewhere. -->
 
 Note: If it is your first time here, Check out the "Complete Newbs guide" instead

keyboards/ergotaco/config.h

@@ -0,0 +1,61 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+// Copy and worked on with love from the EZ team
+
+#pragma once
+#include "config_common.h"
+
+#define VERBOSE
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x1337
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    g Heavy Industries 
+#define PRODUCT         ErgoTaco
+#define DESCRIPTION     QMK keyboard firmware for ErgoTaco
+
+/* key matrix size */
+#define MATRIX_ROWS 12
+#define MATRIX_ROWS_PER_SIDE (MATRIX_ROWS / 2)
+#define MATRIX_COLS 1
+
+#define MOUSEKEY_INTERVAL       20
+#define MOUSEKEY_DELAY          0
+#define MOUSEKEY_TIME_TO_MAX    60
+#define MOUSEKEY_MAX_SPEED      7
+#define MOUSEKEY_WHEEL_DELAY 0
+#define TAPPING_TOGGLE  1
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+#define TAPPING_TERM    200
+#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.)
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() (get_mods() == MOD_MASK_CTRL || get_mods() == MOD_MASK_SHIFT)
+
+#define DEBOUNCE    5
+#define USB_MAX_POWER_CONSUMPTION 500

keyboards/ergotaco/ergotaco.c

@@ -0,0 +1,72 @@
+#include QMK_KEYBOARD_H
+
+bool i2c_initialized = 0;
+i2c_status_t mcp23018_status = 0x20;
+
+void matrix_init_kb(void) {
+    // (tied to Vcc for hardware convenience)
+    //DDRB  &= ~(1<<4);  // set B(4) as input
+    //PORTB &= ~(1<<4);  // set B(4) internal pull-up disabled
+
+    // unused pins
+    // set as input with internal pull-up enabled
+    DDRB  &= ~(1<<4 | 1<<5 | 1<<6 | 1<<7);
+    PORTB |=  (1<<4 | 1<<5 | 1<<6 | 1<<7);
+
+    DDRC  &= ~(1<<7 | 1<<6);
+    PORTC |=  (1<<7 | 1<<6);
+
+    DDRD  &= ~(1<<4 | 1<<5 | 1<<6 | 1<<7);
+    PORTD |=  (1<<4 | 1<<5 | 1<<6 | 1<<7);
+
+    DDRE  &= ~(1<<6);
+    PORTE |=  (1<<6);
+
+    DDRF  &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6 | 1<<7);
+    PORTF |=  (1<<0 | 1<<1 | 1<<4 | 1<<6 | 1<<7);
+
+    matrix_init_user();
+}
+
+
+uint8_t init_mcp23018(void) {
+    print("starting init");
+    mcp23018_status = 0x20;
+
+    // I2C subsystem
+
+    // uint8_t sreg_prev;
+    // sreg_prev=SREG;
+    // cli();
+
+    if (i2c_initialized == 0) {
+        i2c_init();  // on pins D(1,0)
+        i2c_initialized = true;
+        _delay_ms(1000);
+    }
+
+    // set pin direction
+    // - unused  : input  : 1
+    // - input   : input  : 1
+    // - driving : output : 0
+    mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT);    if (mcp23018_status) goto out;
+    mcp23018_status = i2c_write(IODIRA, ERGODOX_EZ_I2C_TIMEOUT);            if (mcp23018_status) goto out;
+    mcp23018_status = i2c_write(0b00000000, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
+    mcp23018_status = i2c_write(0b11111111, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
+    i2c_stop();
+
+    // set pull-up
+    // - unused  : on  : 1
+    // - input   : on  : 1
+    // - driving : off : 0
+    mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT);    if (mcp23018_status) goto out;
+    mcp23018_status = i2c_write(GPPUA, ERGODOX_EZ_I2C_TIMEOUT);             if (mcp23018_status) goto out;
+    mcp23018_status = i2c_write(0b00000000, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
+    mcp23018_status = i2c_write(0b11111111, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
+
+out:
+    i2c_stop();
+    // SREG=sreg_prev;
+    //uprintf("Init %x\n", mcp23018_status);
+    return mcp23018_status;
+}

keyboards/ergotaco/ergotaco.h

@@ -0,0 +1,50 @@
+#pragma once
+#include <util/delay.h>
+#include <stdint.h>
+#include <stdbool.h>
+#include "quantum.h"
+#include "i2c_master.h"
+#include "matrix.h"
+
+
+extern i2c_status_t mcp23018_status;
+#define ERGODOX_EZ_I2C_TIMEOUT 1000
+#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
+#define CPU_16MHz       0x00
+
+// I2C aliases and register addresses (see "mcp23018.md")
+//#define I2C_ADDR        0b0100000
+#define I2C_ADDR        0x20
+#define I2C_ADDR_WRITE  ( (I2C_ADDR<<1) | I2C_WRITE )
+#define I2C_ADDR_READ   ( (I2C_ADDR<<1) | I2C_READ  )
+#define IODIRA          0x00            // i/o direction register
+#define IODIRB          0x01
+#define GPPUA           0x0C            // GPIO pull-up resistor register
+#define GPPUB           0x0D
+#define GPIOA           0x12            // general purpose i/o port register (write modifies OLAT)
+#define GPIOB           0x13
+#define OLATA           0x14            // output latch register
+#define OLATB           0x15
+
+void init_ergodox(void);
+uint8_t init_mcp23018(void);
+
+/*  ---------- LEFT HAND -----------   ---------- RIGHT HAND ---------- */
+#define LAYOUT(                                                          \
+    L00,L01,L02,L03,L04,L05,                   R00,R01,R02,R03,R04,R05)  \
+                                                                         \
+   /* matrix positions */                                                \
+    {			\
+    {R00},     \
+    {R01},     \
+    {R02},     \
+    {R03},     \
+    {R04},     \
+    {R05},     \
+    {L05},     \
+    {L04},     \
+    {L03},     \
+    {L02},     \
+    {L01},     \
+    {L00},     \
+}

keyboards/ergotaco/info.json

@@ -0,0 +1,61 @@
+{
+    "keyboard_name": "ErgoTaco",
+    "url": "http://gboards.ca",
+    "maintainer": "germ",
+    "width": 13,
+    "height": 2.75,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {
+                    "x": 0,
+                    "y": 1.25
+                },
+                {
+                    "x": 1,
+                    "y": 0.75
+                },
+                {
+                    "x": 2,
+                    "y": 0.5
+                },
+                {
+                    "x": 3,
+                    "y": 0.25
+                },
+                {
+                    "x": 4,
+                    "y": 1
+                },
+                {
+                    "x": 5,
+                    "y": 1.75
+                },
+                {
+                    "x": 7,
+                    "y": 1.75
+                },
+                {
+                    "x": 8,
+                    "y": 1
+                },
+                {
+                    "x": 9,
+                    "y": 0.25
+                },
+                {
+                    "x": 10,
+                    "y": 0.5
+                },
+                {
+                    "x": 11,
+                    "y": 0.75
+                },
+                {
+                    "x": 12,
+                    "y": 1.25
+                }
+            ]
+        }
+    }
+}

keyboards/ergotaco/keymaps/default/keymap.c

@@ -0,0 +1,42 @@
+/* Good on you for modifying your layout! if you don't have 
+ * time to read the QMK docs, a list of keycodes can be found at
+ *
+ * https://github.com/qmk/qmk_firmware/blob/master/docs/keycodes.md
+ *
+ * There's also a template for adding new layers at the bottom of this file!
+ */
+
+#include QMK_KEYBOARD_H
+
+#define FIESTA   0 // default layer
+#define TACOTIME 1 // symbols
+
+// Blank template at the bottom
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap template 
+ *
+ * ,-------------------------------------------------.           ,--------------------------------------------.
+ * |       |      |      |      |      |      |      |           |       |      |      |      |      |        |
+ * `-------+------+------+------+------+-------------'           `-------+------+------+------+------+--------' */
+[FIESTA] = LAYOUT(  
+   KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y,        KC_A, KC_S, KC_D, KC_F, KC_G, KC_H
+),
+};
+
+/* Keymap template 
+ *
+ * ,-------------------------------------------------.           ,--------------------------------------------.
+ * |       |      |      |      |      |      |      |           |       |      |      |      |      |        |
+ * `-------+------+------+------+------+-------------'           `-------+------+------+------+------+--------'
+[FIESTA] = LAYOUT(  
+   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+),
+ */
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+};
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+};

keyboards/ergotaco/keymaps/default/readme.md

@@ -0,0 +1,6 @@
+This is the default keymap for the ErgoTaco, Make it your own!
+
+## Settings
+To edit various settings, enable the 1u trackball and whatnot please modify /keyboards/ergotaco/keymaps/default/rules.mk
+
+Ideally you should copy this directory and make your changes there. If you come up with a good layout submit a PR!

keyboards/ergotaco/keymaps/default/rules.mk

@@ -0,0 +1,10 @@
+#----------------------------------------------------------------------------
+# make ergotaco:default:dfu
+# Make sure you have dfu-programmer installed!
+#----------------------------------------------------------------------------
+# Firmware options
+
+#Debug options
+VERBOSE 		 		= yes
+DEBUG_MATRIX_SCAN_RATE  = no
+DEBUG_MATRIX		 	= yes

keyboards/ergotaco/matrix.c

@@ -0,0 +1,366 @@
+/*
+Note for ErgoDox EZ customizers: Here be dragons!
+This is not a file you want to be messing with.
+All of the interesting stuff for you is under keymaps/ :)
+Love, Erez
+
+Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "matrix.h"
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include "wait.h"
+#include "action_layer.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include QMK_KEYBOARD_H
+#ifdef DEBUG_MATRIX_SCAN_RATE
+#include  "timer.h"
+#endif
+
+#ifndef DEBOUNCE
+#   define DEBOUNCE	5
+#endif
+
+// ATmega pin defs
+#define ROW1  (1<<5)
+#define COL6  (1<<0)
+#define COL7  (1<<1)
+#define COL8  (1<<2)
+#define COL9  (1<<3)
+#define COL10 (1<<2)
+#define COL11 (1<<3)
+
+
+// bit masks
+#define BMASK     (COL7 | COL8 | COL9 | COL6)
+#define DMASK     (COL10 | COL11)
+#define FMASK     (ROW1)
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+/*
+ * matrix state(1:on, 0:off)
+ * contains the raw values without debounce filtering of the last read cycle.
+ */
+static matrix_row_t raw_matrix[MATRIX_ROWS];
+
+// Debouncing: store for each key the number of scans until it's eligible to
+// change.  When scanning the matrix, ignore any changes in keys that have
+// already changed in the last DEBOUNCE scans.
+static uint8_t debounce_matrix[MATRIX_ROWS * MATRIX_COLS];
+
+static matrix_row_t read_cols(uint8_t row);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+static uint8_t mcp23018_reset_loop;
+// static uint16_t mcp23018_reset_loop;
+
+#ifdef DEBUG_MATRIX_SCAN_RATE
+uint32_t matrix_timer;
+uint32_t matrix_scan_count;
+#endif
+
+
+__attribute__ ((weak))
+void matrix_init_user(void) {}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+  matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+  matrix_scan_user();
+}
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+
+void matrix_init(void)
+{
+    // initialize row and col
+    mcp23018_status = init_mcp23018();
+    unselect_rows();
+    init_cols();
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        raw_matrix[i] = 0;
+        for (uint8_t j=0; j < MATRIX_COLS; ++j) {
+            debounce_matrix[i * MATRIX_COLS + j] = 0;
+        }
+    }
+
+#ifdef DEBUG_MATRIX_SCAN_RATE
+    matrix_timer = timer_read32();
+    matrix_scan_count = 0;
+#endif
+    matrix_init_quantum();
+}
+
+void matrix_power_up(void) {
+    mcp23018_status = init_mcp23018();
+
+    unselect_rows();
+    init_cols();
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+    }
+
+#ifdef DEBUG_MATRIX_SCAN_RATE
+    matrix_timer = timer_read32();
+    matrix_scan_count = 0;
+#endif
+
+}
+
+// Returns a matrix_row_t whose bits are set if the corresponding key should be
+// eligible to change in this scan.
+matrix_row_t debounce_mask(matrix_row_t rawcols, uint8_t row) {
+  matrix_row_t result = 0;
+  matrix_row_t change = rawcols ^ raw_matrix[row];
+  raw_matrix[row] = rawcols;
+  for (uint8_t i = 0; i < MATRIX_COLS; ++i) {
+    if (debounce_matrix[row * MATRIX_COLS + i]) {
+      --debounce_matrix[row * MATRIX_COLS + i];
+    } else {
+      result |= (1 << i);
+    }
+    if (change & (1 << i)) {
+      debounce_matrix[row * MATRIX_COLS + i] = DEBOUNCE;
+    }
+  }
+  return result;
+}
+
+matrix_row_t debounce_read_cols(uint8_t row) {
+  // Read the row without debouncing filtering and store it for later usage.
+  matrix_row_t cols = read_cols(row);
+  // Get the Debounce mask.
+  matrix_row_t mask = debounce_mask(cols, row);
+  // debounce the row and return the result.
+  return (cols & mask) | (matrix[row] & ~mask);;
+}
+
+uint8_t matrix_scan(void)
+{
+  // Then the keyboard
+  if (mcp23018_status) { // if there was an error
+      if (++mcp23018_reset_loop == 0) {
+      // if (++mcp23018_reset_loop >= 1300) {
+          // since mcp23018_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans
+          // this will be approx bit more frequent than once per second
+          print("trying to reset mcp23018\n");
+          mcp23018_status = init_mcp23018();
+          if (mcp23018_status) {
+              print("left side not responding\n");
+          } else {
+              print("left side attached\n");
+          }
+      }
+  }
+
+#ifdef DEBUG_MATRIX_SCAN_RATE
+    matrix_scan_count++;
+    uint32_t timer_now = timer_read32();
+    if (TIMER_DIFF_32(timer_now, matrix_timer)>1000) {
+        print("matrix scan frequency: ");
+        pdec(matrix_scan_count);
+        print("\n");
+
+        matrix_timer = timer_now;
+        matrix_scan_count = 0;
+    }
+#endif
+    for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) {
+        select_row(i);
+        // and select on left hand
+        select_row(i + MATRIX_ROWS_PER_SIDE);
+        // we don't need a 30us delay anymore, because selecting a
+        // left-hand row requires more than 30us for i2c.
+
+        // grab cols from left hand
+        matrix[i] = debounce_read_cols(i);
+        // grab cols from right hand
+        matrix[i + MATRIX_ROWS_PER_SIDE] = debounce_read_cols(i + MATRIX_ROWS_PER_SIDE);
+
+        unselect_rows();
+    }
+
+    matrix_scan_quantum();
+
+#ifdef DEBUG_MATRIX
+    for (uint8_t c = 0; c < MATRIX_COLS; c++) 
+		for (uint8_t r = 0; r < MATRIX_ROWS; r++) 
+		  if (matrix_is_on(r, c)) xprintf("r:%d c:%d \n", r, c);
+#endif
+
+    return 1;
+}
+
+bool matrix_is_modified(void) // deprecated and evidently not called.
+{
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 0123456789ABCDEF\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        pbin_reverse16(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop16(matrix[i]);
+    }
+    return count;
+}
+
+// Remember this means ROWS
+static void  init_cols(void)
+{
+    // init on mcp23018
+    // not needed, already done as part of init_mcp23018()
+
+    // Input with pull-up(DDR:0, PORT:1)
+    DDRF  &= ~FMASK;
+    PORTF |=  FMASK;
+}
+
+static matrix_row_t read_cols(uint8_t row)
+{
+    if (row < 6) {
+        if (mcp23018_status) { // if there was an error
+            return 0;
+        } else {
+            uint8_t data = 0;
+            mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT);    if (mcp23018_status) goto out;
+            mcp23018_status = i2c_write(GPIOB, ERGODOX_EZ_I2C_TIMEOUT);             if (mcp23018_status) goto out;
+            mcp23018_status = i2c_start(I2C_ADDR_READ, ERGODOX_EZ_I2C_TIMEOUT);     if (mcp23018_status) goto out;
+            mcp23018_status = i2c_read_nack(ERGODOX_EZ_I2C_TIMEOUT);                if (mcp23018_status < 0) goto out;
+            data = (~((uint8_t)mcp23018_status) >> 2) & 0x01 ;
+            mcp23018_status = I2C_STATUS_SUCCESS;
+        out:
+            i2c_stop();
+
+#ifdef DEBUG_MATRIX
+            if (data != 0x00) xprintf("I2C: %d\n", data);
+#endif
+            return data;
+        }
+    } else {
+		// Read using bitmask
+        return ~((((PINF & ROW1) >> 5)) & 0x1);
+    }
+}
+
+// Row pin configuration
+static void unselect_rows(void)
+{
+    // no need to unselect on mcp23018, because the select step sets all
+    // the other row bits high, and it's not changing to a different
+    // direction
+    // Hi-Z(DDR:0, PORT:0) to unselect
+    DDRB  &= ~BMASK;
+    PORTB &= ~BMASK;
+    DDRD  &= ~DMASK;
+    PORTD &= ~DMASK;
+}
+
+static void select_row(uint8_t row)
+{
+    if (row < 6) {
+        // select on mcp23018 
+        if (mcp23018_status) { // do nothing on error
+			// Read using bitmask
+        } else { // set active row low  : 0 // set other rows hi-Z : 1 
+            mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
+            mcp23018_status = i2c_write(GPIOA, ERGODOX_EZ_I2C_TIMEOUT);                 if (mcp23018_status) goto out;
+            mcp23018_status = i2c_write(~(1<<row), ERGODOX_EZ_I2C_TIMEOUT);      		if (mcp23018_status) goto out;
+        out:
+            i2c_stop();
+        }
+    } else {
+        // Output low(DDR:1, PORT:0) to select
+        switch (row) {
+            case 6:
+                DDRB  |= COL6;
+                PORTB &= ~COL6;
+                break;
+            case 7:
+                DDRB  |= COL7;
+                PORTB &= ~COL7;
+                break;
+            case 8:
+                DDRB  |= COL8;
+                PORTB &= ~COL8;
+                break;
+            case 9:
+                DDRB  |= COL9;
+                PORTB &= ~COL9;
+                break;
+            case 10:
+                DDRD  |= COL10;
+                PORTD &= ~COL10;
+                break;
+            case 11:
+                DDRD  |= COL11;
+                PORTD &= ~COL11;
+                break;
+        }
+    }
+}

keyboards/ergotaco/readme.md

@@ -0,0 +1,24 @@
+# Gergo
+
+![ErgoTaco](https://i.redd.it/dbcu5i21m3i21.jpg)
+
+It's a Taco with a side of HASL. A 12 key fiesta of a board.
+
+Keyboard Maintainer: [Jeremy Bernhardt](https://github.com/germ)  
+Hardware Supported: ErgoTaco  
+Hardware Availability: [gboards.ca](http://gboards.ca)  
+
+## Firmware building
+Clone the QMK Repo and install dfu-programmer, flash with:
+
+    make ergotaco:default:dfu
+
+And reset your keyboard!
+
+To just test if your build system is sane, try compiling the default keymap using:
+   
+    make ergotaco:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Have an idea? [Reach out to me!](mailto:bernhardtjeremy@gmail.com)

keyboards/ergotaco/rules.mk

@@ -0,0 +1,26 @@
+#----------------------------------------------------------------------------
+# make ergotaco:default:dfu
+# Make sure you have dfu-programmer installed!
+# Do not edit this file! Make a copy of keymaps/default and modify that!
+#----------------------------------------------------------------------------
+
+# Hardware info
+MCU = atmega32u4
+F_CPU = 16000000
+ARCH = AVR8
+BOOTLOADER = atmel-dfu
+F_USB = $(F_CPU)
+
+CUSTOM_MATRIX 		= yes
+EXTRAKEY_ENABLE		= yes
+CONSOLE_ENABLE  	= yes
+COMMAND_ENABLE		= yes
+
+# A bunch of stuff that you shouldn't touch unless you
+# know what you're doing.
+#
+# No touchy, capiche?
+SRC += matrix.c i2c_master.c
+ifeq ($(strip $(DEBUG_MATRIX)), yes)
+    OPT_DEFS += -DDEBUG_MATRIX
+endif

keyboards/handwired/jot50/readme.md

@@ -1,6 +1,4 @@
-# Jotanck
-
-![Jotanck]
+# Jot50
 
 A compact 50% (12x5) ortholinear keyboard kit inspired in the Preonic made by jotix.
 

keyboards/rama/koyu/config.h

@@ -0,0 +1,127 @@
+/* Copyright 2017 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "config_common.h"
+
+// USB Device descriptor parameter
+#define VENDOR_ID       0x5241 // "RW"
+#define PRODUCT_ID      0x4B59 // "KY"
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    RAMA.WORKS
+#define PRODUCT         RAMA KOYU
+#define DESCRIPTION     RAMA KOYU Keyboard
+
+
+
+// key matrix size
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+// KOYU PCB pin-out
+#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
+#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
+#define UNUSED_PINS
+
+// IS31FL3731 driver
+#define DRIVER_COUNT 2
+#define DRIVER_LED_TOTAL 72
+
+// COL2ROW or ROW2COL
+#define DIODE_DIRECTION COL2ROW
+
+// Set 0 if debouncing isn't needed
+#define DEBOUNCING_DELAY 5
+
+// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
+#define LOCKING_SUPPORT_ENABLE
+// Locking resynchronize hack
+#define LOCKING_RESYNC_ENABLE
+
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+// disable debug print
+//#define NO_DEBUG
+
+// disable print
+//#define NO_PRINT
+
+// disable action features
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#define RGB_BACKLIGHT_ENABLED 1
+
+// This conditionally compiles the backlight code for KOYU specifics
+#define RGB_BACKLIGHT_KOYU
+
+// enable/disable LEDs based on layout
+// they aren't really used if RGB_BACKLIGHT_M60_A defined
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 1
+#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
+#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 1
+#define RGB_BACKLIGHT_USE_7U_SPACEBAR 1
+#define RGB_BACKLIGHT_USE_ISO_ENTER 0
+#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 1
+
+// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
+#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
+
+// disable backlight after timeout in minutes, 0 = no timeout
+#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
+
+// the default effect (RGB test)
+#define RGB_BACKLIGHT_EFFECT 255
+
+// These define which keys in the matrix are alphas/mods
+// Used for backlight effects so colors are different for
+// alphas vs. mods
+// Each value is for a row, bit 0 is column 0
+// Alpha=0 Mod=1
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0110000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0110000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0111000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0111000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0111100000000111
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+
+// EEPROM usage
+
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x08
+#define EEPROM_VERSION_ADDR 34
+
+// Backlight config starts after EEPROM version
+#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
+// Dynamic keymap starts after backlight config (35+31)
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 66
+// Dynamic macro starts after dynamic keymaps (66+(4*5*15*2)) = (66+600)
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 666
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 358
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16

keyboards/rama/koyu/info.json

@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "KOYU", 
+    "url": "", 
+    "maintainer": "Wilba", 
+    "bootloader": "DFU", 
+    "width": 16, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Num Lock", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Insert", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Home", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"/", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Ctrl", "x":11, "y":4, "w":1.5}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
+        }
+    }
+}

keyboards/rama/koyu/keymaps/default/keymap.c

@@ -0,0 +1,36 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	// Default layer
+	[0] = LAYOUT_all(
+		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL,  KC_HOME,
+		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,          KC_PGUP,
+		KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                    KC_PGDN,
+		KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,                   KC_UP,   KC_END,
+		MO(1),   KC_LGUI, KC_LALT,                            KC_SPC,                                      MO(2),            KC_LEFT, KC_DOWN, KC_RGHT),
+
+	// Fn1 Layer
+	[1] = LAYOUT_all(
+		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS,  KC_DEL,  KC_TRNS,
+		KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+		KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                                     KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
+
+	// Fn2 Layer
+	[2] = LAYOUT_all(
+		KC_TRNS, EF_DEC,  EF_INC,  H1_DEC,  H1_INC,  H2_DEC,  H2_INC,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC,  BR_INC,  KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC,  S1_INC,  S2_DEC,  S2_INC,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC,  ES_INC,  KC_TRNS,          KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                                     KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
+
+	// Fn3 Layer
+	[3] = LAYOUT_all(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                                     KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
+};

keyboards/rama/koyu/koyu.c

@@ -0,0 +1,18 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef RGB_BACKLIGHT_KOYU
+#error RGB_BACKLIGHT_KOYU not defined, you done goofed somehao, brah
+#endif

keyboards/rama/koyu/koyu.h

@@ -0,0 +1,42 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+#include "../../zeal60/rgb_backlight_keycodes.h"
+#include "../../zeal60/zeal60_keycodes.h"
+
+#define ____ KC_NO
+
+// Right switch of split backspace is at 2,13 and is the only switch
+// whose physical position doesn't match switch matrix position :-(
+// However, it also makes no sense to view the physical as 16 columns,
+// so the numbering goes 00 to 14. Deal with it.
+
+#define LAYOUT_all( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K213, K014, \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       K114, \
+    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,             K214, \
+    K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,             K313, K314, \
+    K400, K401, K402,                   K407,                         K411,       K412, K413, K414  \
+) { \
+    { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \
+    { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \
+    { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \
+    { K300, ____, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \
+    { K400, K401, K402, ____, ____, ____, ____, K407, ____, ____, ____, K411, K412, K413, K414 }  \
+}

keyboards/rama/koyu/readme.md

@@ -0,0 +1,23 @@
+# RAMA KOYU
+
+![RAMA KOYU](https://static1.squarespace.com/static/563c788ae4b099120ae219e2/t/5b8bd6e6b8a045c95eac2003/1535891375794/RW-KOYU-A-RENDER-04-TOP.1335.jpg?format=1500w)
+
+The <20>wait<69> for something isn<73>t the most conscious desire, but that anticipation creates nostalgia.   
+
+At Rama Works, you<6F>ve embraced this. From updates of the blog, to direct communication with the community, being part of a Rama Works product doesn<73>t just start when you receive it. If you<6F>ve ever received a Rama Works product, you know that no detail is overlooked.   
+
+Let us take you on a journey that will capture that sensory experience, and explore the gravitational interaction between aesthetic and design. The Rama Works <20>X<EFBFBD> element personifies the understanding that taking something away doesn<73>t necessarily make it less.   
+
+This is the sound of Rama Works. Never too busy<73>a feeling of delightful modern weightlessness. A rich sonic experience. Sparse and ethereal, this music boldly inhabits a nondescript, borderless space. Warm, synthetic textures, bespoke musical sound design. percussive elements percolating and accentuating movement on the screen and in the stereo field. a sonic palette full of clicks, taps and resonances evoking a sense of calm comfort and familiarity.   
+
+[More info at RAMA WORKS](https://rama.works/koyu/)
+
+Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)  
+Hardware Supported: RAMA KOYU PCB  
+Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make rama/koyu:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/rama/koyu/rules.mk

@@ -0,0 +1,80 @@
+
+
+# project specific files
+SRC =	keyboards/zeal60/zeal60.c \
+		keyboards/zeal60/rgb_backlight.c \
+		quantum/color.c \
+		drivers/issi/is31fl3731.c \
+		drivers/avr/i2c_master.c
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Boot Section
+BOOTLOADER = atmel-dfu
+
+# Do not put the microcontroller into power saving mode
+# when we get USB suspend event. We want it to keep updating
+# backlight effects.
+OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
+CIE1931_CURVE = yes
+
+#LAYOUTS = ???

util/docker_build.sh

@@ -47,4 +47,4 @@ dir=$(pwd -W 2>/dev/null) || dir=$PWD  # Use Windows path if on Windows
 
 # Run container and build firmware
 docker run --rm -it $usb_args -v "$dir":/qmk_firmware qmkfm/qmk_firmware \
-	make "$keyboard${keymap:+:$keymap}${target:+:$target}"
+	/bin/bash -c "make git-submodule; make \"$keyboard${keymap:+:$keymap}${target:+:$target}\""