csiDriver:
  name: "driveripper.zfs-iscsi-enc0"

# add note here about volume expansion requirements
storageClasses:
- name: zfs-iscsi-enc0
  defaultClass: true
  reclaimPolicy: Delete
  volumeBindingMode: Immediate
  allowVolumeExpansion: true
  parameters:
    # for block-based storage can be ext3, ext4, xfs
    fsType: xfs

  mountOptions: []
  secrets:
    provisioner-secret:
    controller-publish-secret:
    node-stage-secret:
    node-publish-secret:
    controller-expand-secret:

volumeSnapshotClasses: []

driver:
  config:
    driver: freenas-api-iscsi
    instance_id:
    httpConnection:
      protocol: https
      host: driveripper.reeseapps.com
      port: 443
      apiKey: ""
      allowInsecure: false
      apiVersion: 2
    zfs:
      datasetProperties:
       "org.freenas:description": "{{ parameters.[csi.storage.k8s.io/pvc/namespace] }}/{{ parameters.[csi.storage.k8s.io/pvc/name] }}"

      datasetParentName: enc0/dcsi/apps
      # do NOT make datasetParentName and detachedSnapshotsDatasetParentName overlap
      # they may be siblings, but neither should be nested in the other
      detachedSnapshotsDatasetParentName: enc0/dcsi/snaps
      zvolCompression:
      # "" (inherit), on, off, verify
      zvolDedup:
      zvolEnableReservation: false
      # 512, 1K, 2K, 4K, 8K, 16K, 64K, 128K default is 16K
      zvolBlocksize:
    iscsi:
      targetPortal: "democratic-csi-server.reeselink.com"
      # for multipath
      targetPortals: [] # [ "server[:port]", "server[:port]", ... ]
      # leave empty to omit usage of -I with iscsiadm
      interface:

      # MUST ensure uniqueness
      # full iqn limit is 223 bytes, plan accordingly
      # default is "{{ name }}"
      nameTemplate: "{{ parameters.[csi.storage.k8s.io/pvc/namespace] }}-{{ parameters.[csi.storage.k8s.io/pvc/name] }}"
      namePrefix: "dcsi-"
      nameSuffix: "-enc0"

      # add as many as needed
      targetGroups:
        # get the correct ID from the "portal" section in the UI
        - targetGroupPortalGroup: 7
          # get the correct ID from the "initiators" section in the UI
          targetGroupInitiatorGroup: 1
          # None, CHAP, or CHAP Mutual
          targetGroupAuthType: None
          # get the correct ID from the "Authorized Access" section of the UI
          # only required if using Chap
          targetGroupAuthGroup:

      extentCommentTemplate: "{{ parameters.[csi.storage.k8s.io/pvc/namespace] }}/{{ parameters.[csi.storage.k8s.io/pvc/name] }}"
      extentInsecureTpc: true
      extentXenCompat: false
      extentDisablePhysicalBlocksize: true
      # 512, 1024, 2048, or 4096,
      extentBlocksize: 512
      # "" (let FreeNAS decide, currently defaults to SSD), Unknown, SSD, 5400, 7200, 10000, 15000
      extentRpm: "SSD"
      # 0-100 (0 == ignore)
      extentAvailThreshold: 0