add esphome tab5

active/device_esphome/tab5.yaml

@@ -43,6 +43,17 @@ ota:
 wifi:
   ssid: !secret wifi_ssid
   password: !secret wifi_password
+  on_connect:
+    - lvgl.label.update:
+        id: lbl_status
+        text: "IDLE"
+    - select.set:
+        id: dac_output
+        option: "LINE1"
+  on_disconnect:
+    - lvgl.label.update:
+        id: lbl_status
+        text: "DISCONNECTED"
 
 i2c:
   - id: bsp_bus
@@ -103,6 +114,7 @@ switch:
     pin:
       pi4ioe5v6408: pi4ioe2
       number: 7
+    restore_mode: ALWAYS_ON
   - platform: gpio
     id: wifi_antenna_int_ext
     pin:
@@ -159,8 +171,8 @@ sensor:
     lambda: |-
       float voltage = id(battery_voltage).state;
       // Adjust these values based on your battery's actual min/max voltage
-      float min_voltage = 6.0;  // Discharged voltage
-      float max_voltage = 8.23;  // Fully charged voltage
+      float min_voltage = 6.75;  // Discharged voltage
+      float max_voltage = 8.2;  // Fully charged voltage
       float percentage = (voltage - min_voltage) / (max_voltage - min_voltage) * 100.0;
       if (percentage > 100.0) return 100.0;
       if (percentage < 0.0) return 0.0;
@@ -168,6 +180,14 @@ sensor:
     update_interval: 60s
     unit_of_measurement: "%"
     accuracy_decimals: 1
+    id: battery_percent
+    on_value:
+      then:
+        - lvgl.label.update:
+            id: lbl_battery
+            text:
+              format: "Battery: %.1f%"
+              args: ["id(battery_percent).state"]
 
 touchscreen:
   - platform: st7123
@@ -221,16 +241,26 @@ light:
     default_transition_length: 250ms
     initial_state:
       brightness: "100%"
-  - platform: lvgl
-    widget: listen_led_widget
-    name: LVGL light
-    id: listen_led
+
+image:
+  defaults:
+    type: rgb565
+    transparency: alpha_channel
+    resize: 512x512
+    byte_order: little_endian
+  images:
+    - file: "images/va_idle.png"
+      id: va_idle
+    - file: "images/va_listen.png"
+      id: va_listen
+    - file: "images/va_speak.png"
+      id: va_speak
 
 lvgl:
   byte_order: little_endian
 
   on_idle:
-    timeout: 60s
+    timeout: 120s
     then:
       - logger.log: "LVGL is idle"
       - light.turn_off:
@@ -238,31 +268,35 @@ lvgl:
           transition_length: 15s
       - lvgl.pause:
   widgets:
-    - led:
-        id: listen_led_widget
+    - image:
+        id: listen_icon_widget
+        src: va_idle
         align: CENTER
-        color: 0xFF0000
-        brightness: 0%
-        height: 100px
-        width: 100px
     - label:
         align: TOP_MID
         id: lbl_status
         text_font: montserrat_48
-        text: "IDLE"
+        text: "CONNECTING..."
     - label:
         align: BOTTOM_LEFT
         id: lbl_version
         text_font: montserrat_12
-        text: "v0.1"
+        text: "v0.5"
+    - label:
+        align: BOTTOM_RIGHT
+        id: lbl_battery
+        text_font: montserrat_28
+        text: Loading...
 
 # The DAC Output select needs to be manually (or with an automation) changed to `LINE1` for the onboard speaker
 select:
   - platform: es8388
     dac_output:
       name: DAC Output
+      id: dac_output
     adc_input_mic:
       name: ADC Input Mic
+      id: adc_input
 
   - platform: template
     id: wifi_antenna_select
@@ -339,44 +373,29 @@ voice_assistant:
   media_player: tab5_media_player
   micro_wake_word: mww
   on_listening:
-    - if:
-        condition: lvgl.is_paused
-        then:
-          - logger.log: "LVGL resuming"
-          - lvgl.resume:
-          - light.turn_on: backlight
-    - light.turn_on:
-        id: listen_led
-        brightness: 100%
-        red: 0%
-        green: 100%
-        blue: 0%
-        effect: "None`"
+    - logger.log: "LVGL resuming"
+    - lvgl.resume:
+    - light.turn_on: backlight
+    - lvgl.image.update:
+        id: listen_icon_widget
+        src: va_listen
     - lvgl.label.update:
         id: lbl_status
         text: "LISTENING"
   on_stt_vad_end:
-    - light.turn_on:
-        id: listen_led
-        brightness: 100%
-        red: 0%
-        green: 0%
-        blue: 100%
-        effect: "None"
     - lvgl.label.update:
         id: lbl_status
         text: "PROCESSING"
+    - lvgl.image.update:
+        id: listen_icon_widget
+        src: va_idle
   on_tts_start:
-    - light.turn_on:
-        id: listen_led
-        brightness: 100%
-        red: 100%
-        green: 0%
-        blue: 0%
-        effect: "None"
     - lvgl.label.update:
         id: lbl_status
         text: "RESPONDING"
+    - lvgl.image.update:
+        id: listen_icon_widget
+        src: va_speak
   on_end:
     # Wait a short amount of time to see if an announcement starts
     - wait_until:
@@ -391,13 +410,12 @@ voice_assistant:
             - not:
                 speaker.is_playing:
     - micro_wake_word.start:
-    - lvgl.led.update:
-        id: listen_led_widget
-        color: 0x000000
-        brightness: "0%"
     - lvgl.label.update:
         id: lbl_status
         text: "IDLE"
+    - lvgl.image.update:
+        id: listen_icon_widget
+        src: va_idle
     - light.turn_off:
         id: backlight
         transition_length: 15s