overhauls of most service docs
All checks were successful
Podman DDNS Image / build-and-push-ddns (push) Successful in 33s
All checks were successful
Podman DDNS Image / build-and-push-ddns (push) Successful in 33s
This commit is contained in:
@@ -5,11 +5,16 @@
|
||||
- [Schlage Door Lock](#schlage-door-lock)
|
||||
- [Philips Hue Lights](#philips-hue-lights)
|
||||
- [Shelly](#shelly)
|
||||
- [Relative Humidity Calculator](#relative-humidity-calculator)
|
||||
- [Barometer](#barometer)
|
||||
- [Relative Humidity Calculator](#relative-humidity-calculator)
|
||||
- [Font Colors](#font-colors)
|
||||
- [Light Indicator for Voice Assistant](#light-indicator-for-voice-assistant)
|
||||
- [Blank Button (Spacer)](#blank-button-spacer)
|
||||
- [Roku Remote](#roku-remote)
|
||||
- [Flair Vent Battery](#flair-vent-battery)
|
||||
- [Voice](#voice)
|
||||
- [Custom Sentences](#custom-sentences)
|
||||
- [Notifications](#notifications)
|
||||
|
||||
## Setup and Configuration
|
||||
|
||||
@@ -48,7 +53,51 @@ is quicker to pick up and transmit device information. Note that "gateway mode"
|
||||
just enable bluetooth and rpc or select "active" from the configuration menu for the shelly
|
||||
device.
|
||||
|
||||
### Relative Humidity Calculator
|
||||
#### Barometer
|
||||
|
||||
<https://www.thoughtco.com/how-to-read-a-barometer-3444043>
|
||||
|
||||
A barometric reading over 30.20 inHg is generally considered high, and high pressure is associated with clear skies and calm weather.
|
||||
|
||||
If the reading is over 30.20 inHg (102268.9 Pa or 1022.689 mb):
|
||||
|
||||
- Rising or steady pressure means continued fair weather.
|
||||
- Slowly falling pressure means fair weather.
|
||||
- Rapidly falling pressure means cloudy and warmer conditions.
|
||||
|
||||
A barometric reading in the range of 29.80 and 30.20 inHg can be considered normal, and normal pressure is associated with steady weather.
|
||||
|
||||
If the reading falls between 29.80 and 30.20 inHg (100914.4–102268.9 Pa or 1022.689–1009.144 mb):
|
||||
|
||||
- Rising or steady pressure means present conditions will continue.
|
||||
- Slowly falling pressure means little change in the weather.
|
||||
- Rapidly falling pressure means that rain is likely, or snow if it is cold enough.
|
||||
|
||||
A barometric reading below 29.80 inHg is generally considered low, and low pressure is associated with warm air and rainstorms.
|
||||
|
||||
If the reading is under 29.80 inHg (100914.4 Pa or 1009.144 mb):
|
||||
|
||||
- Rising or steady pressure indicates clearing and cooler weather.
|
||||
- Slowly falling pressure indicates rain.
|
||||
- Rapidly falling pressure indicates a storm is coming.
|
||||
|
||||
A basic automation would look like
|
||||
|
||||
```yaml
|
||||
It's {{ int(states("sensor.grouse_temp")) }} degrees and {{ states("weather.grouse_weather") }}. The relative humidity is {{ states("sensor.grouse_humidity") }}%. I'm seeing {{ int(states("sensor.grouse_wind_speed")) }}mph wind with gusts up to {{ int(states("sensor.grouse_wind_gust")) }}mph.
|
||||
|
||||
{% set pressure = float(states("sensor.grouse_rel_pressure")) %}
|
||||
The barometer reads {{ pressure }}inHg.
|
||||
{% if pressure > 30.20 %}
|
||||
Fair weather is expected
|
||||
{% elif pressure > 29.80 %}
|
||||
Rain is possible
|
||||
{% else %}
|
||||
Rain is coming.
|
||||
{% endif %}
|
||||
```
|
||||
|
||||
#### Relative Humidity Calculator
|
||||
|
||||
<https://www.wikihow.com/Calculate-Humidity>
|
||||
|
||||
@@ -335,4 +384,32 @@ cards:
|
||||
hold_action:
|
||||
action: none
|
||||
title: Left Living Room TV
|
||||
```
|
||||
```
|
||||
|
||||
### Flair Vent Battery
|
||||
|
||||
Flair vents report low battery at 2.4v. 3v is nominal/full.
|
||||
|
||||
```yaml
|
||||
{% set volt_min=2.4 %}
|
||||
{% set volt_max=3.0 %}
|
||||
{% set volt_diff_max=0.6 %}
|
||||
|
||||
{{ (min(float(states("sensor.main_bedroom_29bf_voltage")) - volt_min, volt_diff_max) / volt_diff_max) * 100 }}
|
||||
```
|
||||
|
||||
## Voice
|
||||
|
||||
### Custom Sentences
|
||||
|
||||
<https://developers.home-assistant.io/docs/voice/intent-recognition/template-sentence-syntax/#sentence-templates-syntax>
|
||||
|
||||
## Notifications
|
||||
|
||||
Notification Information:
|
||||
|
||||
<https://www.home-assistant.io/docs/automation/templating/>
|
||||
|
||||
```yaml
|
||||
Triggered by {{ trigger.entity_id }}, Date: {{ now().strftime('%Y-%m-%d') }}, Time: {{ now().strftime('%H:%M') }}
|
||||
```
|
||||
|
||||
Reference in New Issue
Block a user