add more btrfs admin notes

active/software_btrfs/btrfs.md

@@ -1,21 +1,29 @@
 # BTRFS
 
 - [BTRFS](#btrfs)
+  - [Naming Conventions](#naming-conventions)
   - [Creating an Array](#creating-an-array)
+  - [Converting an Array Between RAID Versions](#converting-an-array-between-raid-versions)
   - [Mounting the Array](#mounting-the-array)
   - [Adding Disks](#adding-disks)
   - [Replacing a Disk](#replacing-a-disk)
   - [Scrubbing the Array](#scrubbing-the-array)
   - [Creating Subvolumes](#creating-subvolumes)
   - [Monitoring Usage](#monitoring-usage)
-  - [Encrypting BTRFS with LUKS](#encrypting-btrfs-with-luks)
   - [Monitoring Disk Health](#monitoring-disk-health)
   - [Defragmenting and Compressing](#defragmenting-and-compressing)
+  - [Converting ext4 to btrfs](#converting-ext4-to-btrfs)
 
 Oracle [has decent docs here](https://docs.oracle.com/en/operating-systems/oracle-linux/8/btrfs/btrfs-ResizingaBtrfsFileSystem.html)
 
 You'll also want to [read about btrfs compression](https://thelinuxcode.com/enable-btrfs-filesystem-compression/)
 
+## Naming Conventions
+
+`poolX` is my naming convention for data pools. `pool0` is the first pool you create.
+
+`backupX` is my naming convention for backup pools. `backup0` is hte first backup pool you create. 
+
 ## Creating an Array
 
 ```bash
@@ -39,11 +47,21 @@ btrfs device scan
 # Raid10
 mkfs.btrfs --data raid10 --metadata raid10 /dev/vdb /dev/vdc /dev/vdd /dev/vde
 btrfs device scan
+```
 
+Label your arrays for easier identification in btrfs filesystem information commands
+
+```bash
+btrfs filesystem label /btrfs/pool0 pool0
+```
+
+## Converting an Array Between RAID Versions
+
+```bash
 # Convert to raid1
 # -dconvert == "data convert"
 # -mconvert == "metadata convert"
-btrfs balance start -dconvert=raid1 -mconvert=raid1 /btrfs
+btrfs balance start -dconvert=raid1 -mconvert=raid1 /btrfs/pool0
 btrfs balance status
 ```
 
@@ -53,48 +71,59 @@ One off
 
 ```bash
 # Create a mount point
-mkdir /btrfs
+mkdir /btrfs/pool0
+
+# List the filesystem UUID
+lsblk --fs
 
 # Mount the top level subvolume
-mount /dev/vdb /btrfs -o subvolid=5
+mount UUID=xxxxx-xxxxx-xxxxx /btrfs/pool0 -o subvolid=5
 
 # Mount with better SSD support
-mount /dev/vdb /btrfs -o subvolid=5,ssd
+mount UUID=xxxxx-xxxxx-xxxxx /btrfs/pool0 -o subvolid=5,ssd
 
 # Mount with auto defragmentation for HDD support
-mount /dev/vdb /btrfs -o subvolid=5,autodefrag
+mount UUID=xxxxx-xxxxx-xxxxx /btrfs/pool0 -o subvolid=5,autodefrag
 
 # Mount a subvolume
-mount /dev/vdb /btrfs -o subvol=home
+mount UUID=xxxxx-xxxxx-xxxxx /btrfs/pool0 -o subvol=home
 
 # Inspect
-btrfs filesystem show /btrfs
+btrfs filesystem show /btrfs/pool0
 ```
 
 In fstab
 
 ```conf
-UUID=btrfs_uuid  /btrfs  btrfs  defaults 0 0
+UUID=btrfs_uuid  /btrfs/pool0  btrfs  defaults 0 0
 ```
 
 ## Adding Disks
 
 ```bash
 # Add a disk
-btrfs device add /dev/vdd /btrfs
+btrfs device add /dev/vdd /btrfs/pool0
+
+# Balance the array
+btrfs balance start /btrfs/pool0
 
 # Watch the expansion
-btrfs filesystem usage /btrfs
+btrfs filesystem usage /btrfs/pool0
 ```
 
 ## Replacing a Disk
 
 ```bash
 # Remove a disk from the array
-btrfs device delete /dev/vdb /btrfs
+# This may take a while, as btrfs will rebalance the array during this process
+btrfs device remove /dev/vdb /btrfs/pool0
+
+# You can watch the device "used" data drain with
+watch btrfs filesystem show /btrfs/pool0/
 
 # Add the new device
-btrfs device add /dev/vdg /btrfs
+# Again, this may take a while while btrfs rebalances.
+btrfs device add /dev/vdg /btrfs/pool0
 ```
 
 ## Scrubbing the Array
@@ -103,10 +132,10 @@ btrfs device add /dev/vdg /btrfs
 # Start a scrub to check for errors
 # -B prevents the process from going to the background
 # -d prints stats for each device
-btrfs scrub start -Bd /btrfs
+btrfs scrub start -Bd /btrfs/pool0
 
 # Check the status of a scrub
-btrfs scrub status /btrfs
+btrfs scrub status /btrfs/pool0
 
 # Watch for disk failures
 dmesg | grep btrfs
@@ -116,13 +145,13 @@ dmesg | grep btrfs
 
 ```bash
 # Create a new subvolume (make sure to mount /btrfs as subvolid=5)
-btrfs subvolume create /btrfs/foo
+btrfs subvolume create /btrfs/pool0
 
 # List all subvolumes under a path
-btrfs subvolume list -t /btrfs
+btrfs subvolume list -o /btrfs/pool0
 
 # Delete a subvolume
-btrfs subvolume delete /btrfs/foo
+btrfs subvolume delete /btrfs/pool0
 ```
 
 ## Monitoring Usage
@@ -132,55 +161,10 @@ btrfs subvolume delete /btrfs/foo
 btrfs filesystem show
 
 # Show usage for a specific array
-btrfs filesystem usage /btrfs
+btrfs filesystem usage /btrfs/pool0
 
 # Quick command to filter for data used
-btrfs filesystem usage /btrfs | grep 'Data.*Used'
+btrfs filesystem usage /btrfs/pool0 | grep 'Data.*Used'
-```
-
-## Encrypting BTRFS with LUKS
-
-```bash
-export KEYFILE_PATH=/root/btrfs.keyfile
-export LUKS_DEVS="sdb sdc sdd sde sdf sdg sdh"
-
-# Create a key file
-dd if=/dev/urandom of=${KEYFILE_PATH} bs=128 count=1
-chmod 400 ${KEYFILE_PATH}
-
-# Create partitions
-for luks_dev in $LUKS_DEVS; do
-echo Creating partition for /dev/$luks_dev
-parted -s -a optimal -- /dev/$luks_dev mklabel gpt mkpart primary 1MiB 100%
-done
-
-# Check that your list is good
-for luks_dev in $LUKS_DEVS; do 
-echo will encrypt /dev/${luks_dev}1 and create /dev/mapper/luks-$(lsblk -n -o PARTUUID /dev/${luks_dev}1)
-done
-
-# Create the luks partitions
-# Note that --iter-time 10000 is how long, in milliseconds, to decrypt the key
-# -v is verbose
-# -q is "batch mode", don't ask for confirmation
-# Longer makes it harder to brute-force
-for luks_dev in $LUKS_DEVS; do \
-    LUKS_UUID=$(lsblk -n -o PARTUUID /dev/${luks_dev}1)
-    LUKS_NAME=luks-${LUKS_UUID}
-    echo "Encrypting /dev/${luks_dev}1"; \
-    cryptsetup luksFormat -v -q --key-file ${KEYFILE_PATH} /dev/${luks_dev}1
-    echo "Unlocking /dev/${luks_dev}1 as ${LUKS_NAME}"
-    cryptsetup open /dev/${luks_dev}1 ${LUKS_NAME} --key-file=${KEYFILE_PATH}
-    echo "Adding ${LUKS_NAME} UUID=${LUKS_UUID} ${KEYFILE_PATH} discard to crypttab"
-    echo "${LUKS_NAME} UUID=${LUKS_UUID} none discard" >> /etc/crypttab
-done
-
-# List filesystems with UUID
-lsblk --fs
-
-# Now create the array using the /dev/mapper entries from above
-mkfs.btrfs --data raid1 --metadata raid1 /dev/mapper/crypt-btrfs-vdb /dev/mapper/crypt-btrfs-vdc...
-btrfs device scan
 ```
 
 ## Monitoring Disk Health
@@ -190,28 +174,39 @@ btrfs device scan
 ```bash
 # btrfs device stats shows any errors
 # Grep for any line not ending in "0"
-btrfs device stats /mnt | grep -vE ' 0$'
+btrfs device stats /btrfs/pool0 | grep -vE ' 0$'
 
 # Show the device IDs for the mounted filesystem
-btrfs filesystem show /mnt
+btrfs filesystem show /btrfs/pool0
 
 # Delete a device (with ID 8, for example)
-btrfs device delete 8 /mnt
+btrfs device delete 8 /btrfs/pool0
 
 # Add a device to the array
-btrfs device add /dev/vdi1 /mnt
+btrfs device add /dev/vdi1 /btrfs/pool0
 
 # Rebalance the array
-btrfs balance start /mnt
+btrfs balance start --background --full-balance /btrfs/pool0
+
+# Check the status
+btrfs balance status /btrfs/pool0
 ```
 
 ## Defragmenting and Compressing
 
 ```bash
 # Defrag a filesystem
-btrfs filesystem defragment /mnt
+btrfs filesystem defragment /btrfs/pool0
 
 # Defrag and apply compression
 # zstd:20 is currently the best compression algorithm
-btrfs filesystem defragment -c zstd:20 /mnt
+btrfs filesystem defragment -c zstd:20 /btrfs/pool0
+```
+
+## Converting ext4 to btrfs
+
+```bash
+# Unmount and then run btrfs-convert
+umount /path/to/mount
+btrfs-convert /dev/sdX1
 ```