# Verbatim upsd reply (LIST UPS / LIST VAR / LIST CMD), recorded by
# ./scripts/capture-fixtures.sh — one `VAR`/`CMD` line per protocol line.
# Volatile values (ups.load, battery.runtime, the voltages) move every poll,
# so a diff here on re-capture is expected; the contract asserts shape, units
# and which variables the drivers omit, never those numbers.
UPS apc "APC Back-UPS RS 1500MS (USB)"
VAR apc battery.charge "100"
VAR apc battery.charge.low "10"
VAR apc battery.charge.warning "50"
VAR apc battery.date "2001/09/25"
VAR apc battery.mfr.date "2021/06/24"
VAR apc battery.runtime "633"
VAR apc battery.runtime.low "120"
VAR apc battery.type "PbAc"
VAR apc battery.voltage "27.3"
VAR apc battery.voltage.nominal "24.0"
VAR apc device.mfr "American Power Conversion"
VAR apc device.model "Back-UPS RS 1500MS"
VAR apc device.serial "SCRUBBEDSERIAL1  "
VAR apc device.type "ups"
VAR apc driver.debug "0"
VAR apc driver.flag.allow_killpower "0"
VAR apc driver.name "usbhid-ups"
VAR apc driver.parameter.interrupt_pipe_no_events_tolerance "-1"
VAR apc driver.parameter.pollfreq "30"
VAR apc driver.parameter.pollinterval "2"
VAR apc driver.parameter.port "auto"
VAR apc driver.parameter.productid "0002"
VAR apc driver.parameter.synchronous "auto"
VAR apc driver.parameter.vendorid "051d"
VAR apc driver.state "quiet"
VAR apc driver.version "2.8.5"
VAR apc driver.version.data "APC HID 0.101"
VAR apc driver.version.internal "0.71"
VAR apc driver.version.usb "libusb-1.0.30 (API: 0x0100010C)"
VAR apc input.sensitivity "medium"
VAR apc input.transfer.high "144"
VAR apc input.transfer.low "88"
VAR apc input.voltage "123.0"
VAR apc input.voltage.nominal "120"
VAR apc ups.beeper.status "disabled"
VAR apc ups.delay.shutdown "20"
VAR apc ups.firmware "952.e5 .D"
VAR apc ups.firmware.aux "e5     "
VAR apc ups.load "50"
VAR apc ups.mfr "American Power Conversion"
VAR apc ups.mfr.date "2021/01/08"
VAR apc ups.model "Back-UPS RS 1500MS"
VAR apc ups.productid "0002"
VAR apc ups.realpower.nominal "900"
VAR apc ups.serial "SCRUBBEDSERIAL1  "
VAR apc ups.status "OL"
VAR apc ups.test.result "No test initiated"
VAR apc ups.timer.reboot "0"
VAR apc ups.timer.shutdown "-1"
VAR apc ups.vendorid "051d"
CMD apc beeper.disable
CMD apc beeper.enable
CMD apc beeper.mute
CMD apc beeper.off
CMD apc beeper.on
CMD apc driver.killpower
CMD apc driver.reload
CMD apc driver.reload-or-error
CMD apc driver.reload-or-exit
CMD apc load.off
CMD apc load.off.delay
CMD apc shutdown.default
CMD apc shutdown.reboot
CMD apc shutdown.stop
CMD apc test.battery.start.deep
CMD apc test.battery.start.quick
CMD apc test.battery.stop
CMD apc test.panel.start
CMD apc test.panel.stop