# Arch with Gnome

<!-- TOC -->

- [Arch with Gnome](#arch-with-gnome)
  - [Installation](#installation)
  - [Post Install](#post-install)
    - [Locale](#locale)
    - [Hardware Acceleration](#hardware-acceleration)
    - [Firewall](#firewall)
    - [Power Management](#power-management)
    - [TPM2 LUKS Decryption](#tpm2-luks-decryption)
    - [Don't sleep while plugged in](#dont-sleep-while-plugged-in)
    - [Fingerprint Reader Support](#fingerprint-reader-support)
      - [Setup](#setup)
      - [Turn Off Fingerprint When Laptop Lid Closed](#turn-off-fingerprint-when-laptop-lid-closed)
    - [AppArmor](#apparmor)
    - [Firejail](#firejail)
    - [AppImage Support](#appimage-support)
    - [Bluetooth](#bluetooth)
    - [Audio](#audio)
    - [Firefox](#firefox)
    - [RDP Remote Desktop](#rdp-remote-desktop)
    - [Virtualization](#virtualization)
    - [CUPS Printing](#cups-printing)
    - [Steam](#steam)
    - [XWayland](#xwayland)
    - [Wireguard](#wireguard)
    - [btrbk](#btrbk)
      - [Snapshots](#snapshots)
      - [Backups](#backups)
    - [ISCSI](#iscsi)
      - [Backing up a snapshot](#backing-up-a-snapshot)
    - [VSCode](#vscode)
  - [Apps](#apps)
  - [Bashrc](#bashrc)
  - [Unecessary](#unecessary)
    - [Plymouth Background Image](#plymouth-background-image)
  - [Help](#help)
    - [Update Grub](#update-grub)
    - [Downgrading Kernel](#downgrading-kernel)

<!-- /TOC -->

## Installation

Follow most of the instructions here:
<https://wiki.archlinux.org/title/Installation_guide>

1. Download Arch
2. Verify the image
3. Create a bootable ISO
4. Disable secureboot (reenable later)
5. Put your machine in setup mode

    On framework this is done in the UEFI setup page for Security, sub-page
    Secure Boot, choose “Erase all Secure Boot Settings.”

6. Boot into the live image
7. Check for network connectivity

    ```bash
    # Check for internet
    ip a
    ping archlinux.org
    ```

8. `timedatectl` to update system clock
9. Create disk partitions. Use gdisk or beware "bootctl install is not on a gpt partition table"

    ```bash
    fdisk -l
    gdisk /dev/vda
    ```

    - +1G for /boot
    - t EFI SYSTEM for /boot
    - remaining for /

10. `mkfs.fat -F 32 /dev/vda1` (/mnt/boot partition)
11. `cryptsetup luksFormat /dev/vda2`
12. `cryptsetup luksOpen /dev/vda2 root`
13. `mkfs.btrfs /dev/mapper/root` (root partition)
14. Mount the root partition with `mount /mnt`
15. Mount the boot partition with `mount --mkdir /mnt/boot`
16. `pacstrap -K /mnt base linux linux-firmware`

    Note: linux-zen works, linux-hardened breaks appimages

17. `genfstab -U /mnt >> /mnt/etc/fstab`
18. `arch-chroot /mnt`
19. `ln -sf /usr/share/zoneinfo/America/New_York /etc/localtime`
20. `hwclock --systohc`
21. `echo 'LANG=en_US.UTF-8' > /etc/locale.conf`
22. `echo 'KEYMAP=us' > /etc/vconsole.conf`
23. `echo 'hostname' > /etc/hostname`
24. `pacman -S sudo vim gdm gnome dhclient dhcpcd bash-completion tpm2-tss btrfs-progs`
25. Edit /etc/mkinitcpio.conf and set up systemd/sd-encrypt

    ```conf
    HOOKS=(systemd autodetect modconf kms keyboard sd-vconsole block sd-encrypt filesystems fsck)
    ```

26. `mkinitcpio -P`
27. Install systemd-boot

    https://wiki.archlinux.org/title/systemd-boot

    ```bash
    bootctl install
    ```

28. edit your loader.conf with some defaults

    /boot/loader/loader.conf

    ```conf
    default  arch.conf
    timeout  4
    console-mode max
    editor   no
    ```

29. Create a loader (/usr/share/systemd/bootctl/loader.conf)

    /boot/loader/entries/arch.conf

    ```conf
    title   Arch Linux
    linux   /vmlinuz-linux
    initrd  /initramfs-linux.img
    options quiet splash rd.luks.name=d9828faa-2b8c-4184-9e74-9054ae328c6d=root root=/dev/mapper/root rootflags=subvol=root nvme.noacpi=1 acpi_osi="!Windows 2020" mem_sleep_default="deep" rw
    ```

30. Add a pacman hook for systemd-boot updates

    /etc/pacman.d/hooks/95-systemd-boot.hook

    ```conf
    [Trigger]
    Type = Package
    Operation = Upgrade
    Target = systemd

    [Action]
    Description = Gracefully upgrading systemd-boot...
    When = PostTransaction
    Exec = /usr/bin/systemctl restart systemd-boot-update.service
    ```

31. `cd /root/`
32. `pacman -S efitools`
33. `for var in PK KEK db dbx ; do efi-readvar -v $var -o old_${var}.esl ; done`
34. `pacman -S sbctl`
35. `sbctl create-keys`
36. `sbctl enroll-keys -m`
37. `sbctl status`
38. `sbctl verify`
39. `sbctl sign -s /boot/vmlinuz-linux`
40. `sbctl sign -s /boot/EFI/BOOT/BOOTX64.EFI`
41. `sbctl status`
42. `sudo systemctl enable gdm`
43. `useradd ducoterra`
44. `passwd ducoterra`
45. `groupadd sudo`
46. Edit /etc/sudoers and uncomment the section allowing sudo and wheel group privilege
47. `usermod -aG sudo ducoterra`
48. `usermod -aG wheel ducoterra`
49. `mkdir /home/ducoterra`
50. `chown ducoterra:ducoterra /home/ducoterra`
51. `exit`
52. `reboot`

Don't forget to enable secure boot. Don't forget to add a trusted boot loader.
There is a pacman hook which will automatically sign new binaries on update.

## Post Install

### Locale

Set up locale with correct information (required for certain binaries like minecraft-launcher)

1. `vim /etc/locale.gen`

    Uncomment the line:

    en_US.UTF-8 UTF-8

2. `sudo locale-gen`

### Hardware Acceleration

(This helps enable hardware encoding/decoding for steam streaming)

Intel

```bash
sudo pacman -S libva-utils intel-media-driver
vainfo
```

AMD

```bash
sudo pacman -S vulkan-radeon libva-utils libva-mesa-driver xf86-video-amdgpu
```

### Firewall

```bash
sudo pacman -S ufw
sudo ufw enable
```

### Power Management

1. For laptops install `tlp`

    ```bash
    sudo pacman -S tlp tlp-rdw
    sudo systemctl enable --now tlp
    sudo systemctl mask systemd-rfkill.service
    sudo systemctl mask systemd-rfkill.socket
    ```

2. Then configure it with the following settings (optional)

    /etc/tlp.conf

    ```conf
    # I've seen some issues with usb autosuspend
    USB_AUTOSUSPEND=0
    # Restore bluetooth/wifi state on reboot
    # Otherwise it defaults to on
    RESTORE_DEVICE_STATE_ON_STARTUP=1
    # Disable wifi when plugged in
    # You might not want this for continuity - eg. you're copying a file to a network
    # share over wifi - plugging in will cancel the copy with this option enabled.
    DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
    # Re-enable wifi when unplugged.
    DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
    ```

3. For desktops install cpupower

    ```bash
    sudo pacman -S cpupower
    systemctl enable --now cpupower
    ```

    Temporarily set power profile with `cpupower frequency-set -g performance`

    Edit /etc/default/cpupower

    ```conf
    governor='performance'
    ```

### TPM2 LUKS Decryption

Using `--tpm2-pcrs=7` enforces secure boot and will require password if secure boot is disabled.

1. `pacman -S tpm2-tss`
2. `systemd-cryptenroll /dev/vda2 --wipe-slot=tpm2 --tpm2-device=auto --tpm2-pcrs=7`

### Don't sleep while plugged in

This is needed for the Framework 13 (11th gen) since sleeping while plugged in to a dock
will prevent it from waking up.

/etc/systemd/logind.conf

```conf
...
HandleLidSwitchExternalPower=lock
HandleLidSwitchDocked=ignore
...
```

### Fingerprint Reader Support

#### Setup

1. `sudo pacman -S fprintd`
2. `sudo systemctl enable --now fprintd`
3. Enable fingerprint terminal login but prompt for password first (enter switches to prompt for fingerprint)

    /etc/pam.d/sudo

    ```conf
    # fingerprint auth
    auth      sufficient pam_fprintd.so
    ```

#### Turn Off Fingerprint When Laptop Lid Closed

To disable fingerprint authentication when the laptop lid is closed, and
re-enable when it is reopened, we will use acpid to bind to the button/lid.*
event to a custom script that will comment out fprintd auth in /etc/pam.d/sudo.

Usually we'd just `systemctl mask fprintd` but this breaks gdm (as of 08/06/23). See
<https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2267> and
<https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/6585>.

1. `pacman -S acpid` and then `systemctl enable --now acpid`
2. Create file /etc/acpi/laptop-lid.sh with the following contents:

    ```bash
    #!/bin/bash

    if grep -Fq closed /proc/acpi/button/lid/LID0/state # &&
        # This is used to detect if a display is connected.
        # For USB C displayport use: 
        # grep -Fxq connected /sys/class/drm/card1-DP-2/status
        # For hdmi use:
        # grep -Fxq connected /sys/class/drm/card0-HDMI-A-1/status
    then
        # comment out fprintd
        sed -i -E 's/^([^#].*pam_fprintd.so)/#\1/g' /etc/pam.d/sudo
    else
        # uncomment fprintd
        sed -i -E 's/#(.*pam_fprintd.so)/\1/g' /etc/pam.d/sudo

    fi
    ```

3. Make the file executable with

    `chmod +x /etc/acpi/laptop-lid.sh`

4. Create file /etc/acpi/events/laptop-lid with the following contents:

    ```bash
    event=button/lid.*
    action=/etc/acpi/laptop-lid.sh
    ```

5. Restart the acpid service with:

    `systemctl restart acpid`

Now the fingerprint will be used only when the lid is open.

In order to ensure the correct state after suspend we need a service file which
runs our script on wake.

1. Create a file named /etc/systemd/system/laptop-lid.service with the following contents:

    ```bash
    [Unit]
    Description=Laptop Lid
    After=suspend.target

    [Service]
    ExecStart=/etc/acpi/laptop-lid.sh

    [Install]
    WantedBy=multi-user.target
    WantedBy=suspend.target
    ```

2. Reload the systemd config files with

    `sudo systemctl daemon-reload`

3. Start and enable the service with

    `sudo systemctl enable --now laptop-lid.service`

Now the status should be correct even after connecting/disconnecting when the computer is off.

### AppArmor

1. `sudo pacman -S apparmor`
2. `sudo systemctl enable --now apparmor`
3. `sudo systemctl enable --now auditd`
4. Add the correct kernel parameters

    /boot/loaders/entries/arch.conf

    ```conf
    title Arch Linux
    ...
    options ...lsm=landlock,lockdown,yama,integrity,apparmor,bpf audit=1...
    ```

### Firejail

Firejail launches supported applications in a sandboxed environment where it limits access
to system files and resources.

For example:

- Firefox will not be able to access more than a small subset of your home directory.
- VSCode will not be able to acces ~/.config/autostart.

1. `sudo pacman -S firejail`
2. `sudo firecfg`
3. `firecfg --fix`

### AppImage Support

fuse is required to run most appimages.

Also chmod +x before running.

1. `sudo pacman -S fuse`
2. `cp ~/Downloads/xxxxxxx.appimage ~/Applications
3. Write a .desktop entry at ~/.local/share/applications/

    ```conf
    [Desktop Entry]
    Encoding=UTF-8
    Name=
    Exec=/home/ducoterra/Applications/
    Icon=/home/ducoterra/Applications/
    Type=Application
    Categories=;
    ```

### Bluetooth

1. `sudo pacman -S bluez bluez-utils`
2. `sudo systemctl enable --now bluetooth`

### Audio

Without pipewire-pulse the audio level/device will reset every reboot.

1.  `sudo pacman -S pipewire-pulse` (remove conflicting packages)

### Firefox

You'll want firefox and gnome-browser-connector (for gnome extension management).

```bash
sudo pacman -S firefox gnome-browser-connector
```

### RDP Remote Desktop

1. `sudo pacman -S remmina freerdp`

### Virtualization

1. Install virtualization capabilties

    ```bash
    sudo pacman -S qemu-full libvirt iptables-nft dnsmasq virt-manager qemu-desktop swtpm
    sudo usermod -aG libvirt ducoterra
    sudo virsh net-autostart default
    ```

2. Edit /etc/libvirt/libvirtd.conf

    ```conf
    ...
    unix_sock_group = 'libvirt'
    ...
    unix_sock_rw_perms = '0770'
    ...
    ```

3. Edit /etc/libvirt/qemu.**conf**

    ```conf
    # Some examples of valid values are:
    #
    #       user = "qemu"   # A user named "qemu"
    #       user = "+0"     # Super user (uid=0)
    #       user = "100"    # A user named "100" or a user with uid=100
    #
    user = "ducoterra"

    # The group for QEMU processes run by the system instance. It can be
    # specified in a similar way to user.
    group = "ducoterra"
    ```

4. `systemctl enable --now libvirtd`

If you get a blank screen when launching a VM check that you've used the correct bios -
either secboot or not secboot. This is the most common problem.

**Arch Guests**

In order to get drivers for spice you'll need the guest spice drivers:

```bash
sudo pacman -S qemu-guest-agent spice-vdagent
```

### CUPS Printing

12. `sudo pacman -S cups cups-pdf avahi`
14. `sudo vim /etc/nsswitch.conf`

    ```conf
    hosts: mymachines mdns_minimal [NOTFOUND=return] resolve [!UNAVAIL=return] files myhostname dns
    ```

15. `sudo systemctl start cups`
16. `sudo systemctl start avahi-daemon`

### Steam

<https://wiki.archlinux.org/title/Official_repositories#multilib>

Edit /etc/pacman.conf

```conf
[multilib]
Include = /etc/pacman.d/mirrorlist
```

```bash
sudo pacman -S steam steam-native
```

When prompted, use vulkan-radeon

`steam-native` allows vaapi hardware encoding for steam remote play.

### XWayland

Provides compatibility with X server applications (like wine)

1. `sudo pacman -S xorg-xwayland`

### Wireguard

Wireguard requires `linux-headers`. If that isn't installed or is misconfigured your
vpn likely won't activate.

1. `sudo pacman -S wireguard-tools`

### btrbk

#### Snapshots

1. Grab the btrbk binary from the github repo. Copy it to /usr/local/bin/btrbk.
2. Create a snapshot config

    /etc/btrbk/snapshots.conf

    ```conf
    snapshot_preserve_min   24h
    snapshot_preserve       14d

    volume /mnt/btr_pool
        subvolume           root
        snapshot_dir        .snapshots

    volume /mnt/btr_pool
        subvolume           home
        snapshot_dir        .snapshots

    volume /mnt/btr_pool
        subvolume           libvirt
        snapshot_dir        .snapshots

    volume /mnt/btr_pool
        subvolume           nextcloud
        snapshot_dir        .snapshots
    ```

3. Then create a snapshot service

    /etc/systemd/system/btrbk_snapshots.service

    ```conf
    [Unit]
    Description=Runs btrbk with config file at /etc/btrbk/snapshots.conf

    [Service]
    ExecStart=/usr/local/bin/btrbk -c /etc/btrbk/snapshots.conf -v run
    ```

4. Then create a timer for the service

    /etc/systemd/system/btrbk_snapshots.timer

    ```conf
    [Unit]
    Description=Run snapshots every hour

    [Timer]
    OnCalendar=hourly

    AccuracySec=10min
    Persistent=true
    Unit=btrbk_snapshots.service

    [Install]
    WantedBy=timers.target
    ```

5. Then enable the service

    ```bash
    systemctl enable --now btrbk_snapshots.conf
    ```

#### Backups

Before you begin, go through the usual process of setting up an encrypted drive:

1. Install udisks2 for automatic usb drive mounting

    ```bash
    pacman -S udisks2
    ```

2. Crypttab automatically loads keys named `<drive_name>.key` from `/etc/cryptsetup-keys.d`

    ```bash
    mkdir /etc/cryptsetup-keys.d
    ```

3. Generate a sufficiently random key

    ```bash
    dd if=/dev/urandom of=/etc/cryptsetup-keys.d/btr_backup.key bs=64 count=1`
    ```

4. Add the key to your backup drive

    ```bash
    cryptsetup luksAddKey /dev/sda1 /etc/cryptsetup-keys.d/btr_backup.key
    ```

5. Create a crypttab entry

    /etc/crypttab

    ```text
    btr_backup  UUID=a074a34c-1211-4f9a-a88c-071b4775fe54   none    nofail
    ```

6. Create an fstab entry

    /etc/fstab

    ```text
    /dev/mapper/btr_backup  /mnt/btr_backup btrfs   rw,relatime,ssd,space_cache=v2,subvolid=5,comment=x-gvfs-show,nofail    0 0
    ```

7. Create a read-only mount point to prevent accidental backups to the wrong disk

    ```bash
    btrfs subvolume create /mnt/btr_backup
    btrfs property set /mnt/btr_backup ro true
    ```

8. Create a backup config

    /etc/btrbk/backups.conf

    ```conf
    snapshot_create         no
    target_preserve_min     no
    target_preserve         30d

    volume /mnt/btr_pools
        target /mnt/btr_backup
        subvolume           root
        snapshot_dir        .snapshots

    volume /mnt/btr_pools
        target /mnt/btr_backup
        subvolume           home
        snapshot_dir        .snapshots

    volume /mnt/btr_pools
        target /mnt/btr_backup
        subvolume           libvirt
        snapshot_dir        .snapshots
    ```

9. Create a backup service

    /etc/systemd/system/btrbk_backups.service

    ```conf
    [Unit]
    Description=Runs btrbk with config file at /etc/btrbk/btrbk.conf

    [Service]
    ExecStart=btrbk -c /etc/btrbk/btrbk.conf -v run
    ```

10. Create a timer to activate the service

    /etc/systemd/system/btrbk_backups.timer

    ```conf
    [Unit]
    Description=Run btrbk every hour

    [Timer]
    OnCalendar=hourly
    AccuracySec=10min
    Persistent=true
    Unit=btrbk.service

    [Install]
    WantedBy=timers.target
    ```

11. Enable the timer

    ```bash
    systemctl enable --now btrbk_backup.conf
    ```

### ISCSI

1. Add auth login

    /etc/iscsi/iscsid.conf

    ```conf
    node.session.auth.chap_algs = SHA3-256,SHA256,SHA1,MD5
    node.session.auth.username = username
    node.session.auth.password = password
    ```

2. Initiate and login to the portal

    ```bash
    # Add a new target to your list of nodes
    iscsiadm \
        -m discovery \
        -t st \
        -p driveripper.reeselink.com

    # Login to the target
    iscsiadm \
        -m node \
        --targetname iqn.2023-01.driveripper.reeselink.com:backup-reese-pc \
        -p driveripper.reeselink.com:3260 \
        --login

    # or login to all targets
    iscsiadm -m node --loginall all

    # View current session
    iscsiadm -m session

    # Log out of all sessions
    iscsiadm -m node -u
    ```

#### Backing up a snapshot

```bash
pacman -S pv

btrfs send /mnt/btr_backup/root.20230727T1000 | pv | btrfs receive /mnt/btr_iscsi
```

### VSCode

For the open source version of code install `code`:

```bash
sudo pacman -S code
```

For the proprietary version of vscode install `yay` and then:

```bash
yay -S visual-studio-code-bin
```

To save a list of installed extensions run:

```bash
code --list-extensions >> vscode_extensions.txt
```

To install that list of extensions run:

```bash
cat vscode_extensions.txt | xargs -L 1 code --install-extension
```

## Apps

| Name             | Description               |
| ---------------- | ------------------------- |
| base-devel       | makepkg requirement       |
| kubectl          | kubernetes kubectl        |
| wine             | wine64 emulator           |
| steam            | steam                     |
| git              | git                       |
| iperf3           | iperf3 network speedtest  |
| spotify-launcher | official spotify launcher |

## Bashrc

~/.bashrc

```bash
# .bashrc

# Source global definitions
if [ -f /etc/bashrc ]; then
        . /etc/bashrc
fi

# User specific binaries
if ! [[ "$PATH" =~ "$HOME/.local/bin:$HOME/bin:" ]]
then
    PATH="$HOME/.local/bin:$HOME/bin:$PATH"
fi
export PATH

# User specific aliases and functions (source .bashrc.d/)
if [ -d ~/.bashrc.d ]; then
        for rc in ~/.bashrc.d/*; do
                if [ -f "$rc" ]; then
                        . "$rc"
                fi
        done
fi

# clear var used in for loop
unset rc
```

~/.bashrc.d/aliases.sh

```bash
# (Mostly) Taken from https://www.cyberciti.biz/tips/bash-aliases-mac-centos-linux-unix.html
# Author: Vivek Gite

## Colorize the ls output ##
alias ls="ls --color=auto"

## Colorize the grep command output for ease of use (good for log files)##
alias grep='grep --color=auto'
alias egrep='egrep --color=auto'
alias fgrep='fgrep --color=auto'

## Make mount human readable ##
alias mount='mount |column -t'

## show open ports ##
alias ports='ss -tulanp'

# do not delete / or prompt if deleting more than 3 files at a time #
alias rm='rm -I --preserve-root'

# confirmation #
alias mv='mv -i'
alias cp='cp -i'
alias ln='ln -i'

# Parenting changing perms on / #
alias chown='chown --preserve-root'
alias chmod='chmod --preserve-root'
alias chgrp='chgrp --preserve-root'

## pass options to free ##
alias meminfo='free -m -l -t'
 
## get top process eating memory
alias psmem='ps auxf | sort -nr -k 4'
alias psmem10='ps auxf | sort -nr -k 4 | head -10'
 
## get top process eating cpu ##
alias pscpu='ps auxf | sort -nr -k 3'
alias pscpu10='ps auxf | sort -nr -k 3 | head -10'

## this one saved by butt so many times ##
alias wget='wget -c'

## set some other defaults ##
alias df='df -H'
alias du='du -ch'

## ls but with file sizes, showing largest at the bottom ## 
alias lst='ls --human-readable --size -1 -S --classify -r'

## ls show only directories
alias lsd='ls -d */'

## Count the number of files in a directory
alias lsc='find . -type f | wc -l'

## ls sort by last modified ##
alias lmt='ls -t -1'
```

## Unecessary

### Plymouth Background Image

1. `sudo cp image.png /usr/share/plymouth/themes/spinner/background-tile.png`
1. `sudo plymouth-set-default-theme -R spinner`

## Help

### Update Grub

1. `grub-install --target=x86_64-efi --efi-directory=/boot --bootloader-id=BOOT`
1. `cp /boot/EFI/BOOT/grubx64.efi /boot/EFI/BOOT/bootx64.efi`

### Downgrading Kernel

You can find old kernel versions at <https://archive.archlinux.org/packages/l/linux/>

You can find old kernel-header versions at <https://archive.archlinux.org/packages/l/linux-headers/>

If you want to downgrade to a previously installed kernel you can use pacman cache:

1. `cd /var/cache/pacman/pkg`
2. `pacman -U linux-x.x.x.arch1-1-x86_64.pkg.tar.zst linux-headers-x.x.x.arch1-1-x86_64.pkg.tar.zst`
3. `reboot`

If you want to downgrade to a kernel that wasn't previously installed:

1. Download linux... and linux-headers... from above
2. `pacman -U linux-x.x.x.arch1-1-x86_64.pkg.tar.zst linux-headers-x.x.x.arch1-1-x86_64.pkg.tar.zst`
3. `reboot`