manually run formatting job (#11503)

* tunks/ergo33: info.json fixes

Fix layout macro reference and key sequence.

* fix make command in readme

docs/feature_rgblight.md

@@ -368,14 +368,14 @@ rgblight_sethsv(HSV_GREEN, 2); // led 2
 |`rgblight_increase_hue_noeeprom()`          |Increase the hue for effect range LEDs. This wraps around at maximum hue (not written to EEPROM) |
 |`rgblight_decrease_hue()`                   |Decrease the hue for effect range LEDs. This wraps around at minimum hue |
 |`rgblight_decrease_hue_noeeprom()`          |Decrease the hue for effect range LEDs. This wraps around at minimum hue (not written to EEPROM) |
-|`rgblight_increase_sat()`                   |Increase the saturation for effect range LEDs. This wraps around at maximum saturation |
-|`rgblight_increase_sat_noeeprom()`          |Increase the saturation for effect range LEDs. This wraps around at maximum saturation (not written to EEPROM) |
-|`rgblight_decrease_sat()`                   |Decrease the saturation for effect range LEDs. This wraps around at minimum saturation |
-|`rgblight_decrease_sat_noeeprom()`          |Decrease the saturation for effect range LEDs. This wraps around at minimum saturation (not written to EEPROM) |
-|`rgblight_increase_val()`                   |Increase the value for effect range LEDs. This wraps around at maximum value |
-|`rgblight_increase_val_noeeprom()`          |Increase the value for effect range LEDs. This wraps around at maximum value (not written to EEPROM) |
-|`rgblight_decrease_val()`                   |Decrease the value for effect range LEDs. This wraps around at minimum value |
-|`rgblight_decrease_val_noeeprom()`          |Decrease the value for effect range LEDs. This wraps around at minimum value (not written to EEPROM) |
+|`rgblight_increase_sat()`                   |Increase the saturation for effect range LEDs. This stops at maximum saturation |
+|`rgblight_increase_sat_noeeprom()`          |Increase the saturation for effect range LEDs. This stops at maximum saturation (not written to EEPROM) |
+|`rgblight_decrease_sat()`                   |Decrease the saturation for effect range LEDs. This stops at minimum saturation |
+|`rgblight_decrease_sat_noeeprom()`          |Decrease the saturation for effect range LEDs. This stops at minimum saturation (not written to EEPROM) |
+|`rgblight_increase_val()`                   |Increase the value for effect range LEDs. This stops at maximum value |
+|`rgblight_increase_val_noeeprom()`          |Increase the value for effect range LEDs. This stops at maximum value (not written to EEPROM) |
+|`rgblight_decrease_val()`                   |Decrease the value for effect range LEDs. This stops at minimum value |
+|`rgblight_decrease_val_noeeprom()`          |Decrease the value for effect range LEDs. This stops at minimum value (not written to EEPROM) |
 |`rgblight_sethsv(h, s, v)`                  |Set effect range LEDs to the given HSV value where `h`/`s`/`v` are between 0 and 255 |
 |`rgblight_sethsv_noeeprom(h, s, v)`         |Set effect range LEDs to the given HSV value where `h`/`s`/`v` are between 0 and 255 (not written to EEPROM) |
 

docs/ja/_summary.md

@@ -103,6 +103,7 @@
     * [DIP スイッチ](ja/feature_dip_switch.md)
     * [エンコーダ](ja/feature_encoders.md)
     * [触覚フィードバック](ja/feature_haptic_feedback.md)
+    * [LED インジケータ](ja/feature_led_indicators.md)
     * [Proton C 変換](ja/proton_c_conversion.md)
     * [PS/2 マウス](ja/feature_ps2_mouse.md)
     * [分割キーボード](ja/feature_split_keyboard.md)

docs/ja/custom_quantum_functions.md

@@ -1,8 +1,8 @@
 # キーボードの挙動をカスタマイズする方法
 
 <!---
-  original document: 0.10.33:docs/custom_quantum_functions.md
-  git diff 0.10.33 HEAD -- docs/custom_quantum_functions.md | cat
+  original document: 0.10.52:docs/custom_quantum_functions.md
+  git diff 0.10.52 HEAD -- docs/custom_quantum_functions.md | cat
 -->
 
 多くの人にとって、カスタムキーボードはボタンの押下をコンピュータに送信するだけではありません。単純なボタンの押下やマクロよりも複雑なことを実行できるようにしたいでしょう。QMK にはコードを挿入したり、機能を上書きしたり、様々な状況でキーボードの挙動をカスタマイズできるフックがあります。
@@ -93,106 +93,6 @@ keyrecord_t record {
 }
 ```
 
-# LED 制御
-
-QMK は HID 仕様で定義された5つの LED の読み取りメソッドを提供します:
-
-* Num Lock
-* Caps Lock
-* Scroll Lock
-* Compose
-* Kana
-
-ロック LED の状態を取得するには2つの方法があります:
-
-* `bool led_update_kb(led_t led_state)` あるいは `_user(led_t led_state)` を実装する、または
-* `led_t host_keyboard_led_state()` を呼び出す
-
-!> `host_keyboard_led_state()` は `led_update_user()` が呼ばれる前に新しい値を既に反映している場合があります。
-
-LED の状態を `uint8_t` として提供する2つの非推奨の関数があります:
-
-* `uint8_t led_set_kb(uint8_t usb_led)` と `_user(uint8_t usb_led)`
-* `uint8_t host_keyboard_leds()`
-
-## `led_update_user()`
-
-この関数はこれら5つの LED のいずれかの状態が変化すると呼ばれます。LED の状態を構造体のパラメータとして受け取ります。
-
-慣例により、`led_update_kb()` にそのコードを実行するようフックさせるために `led_update_user()` から `true` を返し、`led_update_kb()` でコードを実行したくない場合は `false` を返します。
-
-以下はいくつかの例です:
-
-- レイヤー表示のような何かのために LED を使うために LED を上書きする
-   - `_kb()` 関数を実行したくないので、`false`  を返します。これはレイヤーの挙動を上書きするためです。
-- LED がオンあるいはオフになった時に音楽を再生する。
-   - `_kb` 関数を実行したいので、`true` を返します。これはデフォルトの LED の挙動に追加されます。
-
-?> `led_set_*` 関数は `bool` の代わりに `void` を返すため、キーボードの LED 制御を上書きすることができません。従って、代わりに `led_update_*` を使うことをお勧めします。
-
-### `led_update_kb()` の実装例
-
-```c
-bool led_update_kb(led_t led_state) {
-    bool res = led_update_user(led_state);
-    if(res) {
-        // writePin は 1 でピンを high に、0 で low に設定します。
-        // この例では、ピンは反転していて、
-        // low/0 は LED がオンになり、high/1 は LED がオフになります。
-        // この挙動は、LED がピンと VCC の間にあるか、ピンと GND の間にあるかどうかに依存します。
-        writePin(B0, !led_state.num_lock);
-        writePin(B1, !led_state.caps_lock);
-        writePin(B2, !led_state.scroll_lock);
-        writePin(B3, !led_state.compose);
-        writePin(B4, !led_state.kana);
-    }
-    return res;
-}
-```
-
-### `led_update_user()` の実装例
-
-この不完全な例は Caps Lock がオンまたはオフになった場合に音を再生します。また LED の状態を保持する必要があるため、`true` を返します。
-
-```c
-#ifdef AUDIO_ENABLE
-  float caps_on[][2] = SONG(CAPS_LOCK_ON_SOUND);
-  float caps_off[][2] = SONG(CAPS_LOCK_OFF_SOUND);
-#endif
-
-bool led_update_user(led_t led_state) {
-    #ifdef AUDIO_ENABLE
-    static uint8_t caps_state = 0;
-    if (caps_state != led_state.caps_lock) {
-        led_state.caps_lock ? PLAY_SONG(caps_on) : PLAY_SONG(caps_off);
-        caps_state = led_state.caps_lock;
-    }
-    #endif
-    return true;
-}
-```
-
-### `led_update_*` 関数のドキュメント
-
-* キーボード/リビジョン: `bool led_update_kb(led_t led_state)`
-* キーマップ: `bool led_update_user(led_t led_state)`
-
-## `host_keyboard_led_state()`
-
-最後に受信した LED の状態を `led_t` として取得するためにこの関数を呼びます。これは、`led_update_*` の外部から、例えば [`matrix_scan_user()`](#matrix-scanning-code) の中で LED の状態を読み取るのに便利です。
-
-## 物理的な LED の状態の設定
-
-一部のキーボードの実装は、物理的な LED の状態を設定するための便利なメソッドを提供しています。
-
-### Ergodox キーボード
-
-Ergodox の実装は、個々の LED をオンあるいはオフにするために `ergodox_right_led_1`/`2`/`3_on`/`off()` と、インデックスによってそれらをオンあるいはオフにするために `ergodox_right_led_on`/`off(uint8_t led)` を提供します。
-
-さらに、LED の明度を指定することができます。全ての LED に同じ明度を指定するなら `ergodox_led_all_set(uint8_t n)` を使い、個別の LED の明度を指定するなら `ergodox_right_led_1`/`2`/`3_set(uint8_t n)` を使い、LED のインデックスを指定して明度を指定するには  `ergodox_right_led_set(uint8_t led, uint8_t n)` を使います。
-
-Ergodox キーボードは、最低の明度として `LED_BRIGHTNESS_LO` を、最高の輝度(これはデフォルトです)として `LED_BRIGHTNESS_HI` も定義しています。
-
 # キーボードの初期化コード
 
 キーボードの初期化プロセスには幾つかのステップがあります。何をしたいかによって、どの関数を使うべきかに影響します。
@@ -347,7 +247,7 @@ layer_state_t layer_state_set_user(layer_state_t state) {
 }
 ```
 
-特定のレイヤーの状態を確認するには、 `IS_LAYER_ON_STATE(state, layer)` と `IS_LAYER_OFF_STATE(state, layer)` マクロを使います。
+特定のレイヤーの状態を確認するには、`IS_LAYER_ON_STATE(state, layer)` と `IS_LAYER_OFF_STATE(state, layer)` マクロを使います。
 
 `layer_state_set_*` 関数の外では、グローバルなレイヤー状態を確認するために `IS_LAYER_ON(layer)` と `IS_LAYER_OFF(layer)` マクロを使えます。
 

docs/ja/feature_led_indicators.md

@@ -0,0 +1,119 @@
+# LED インジケータ
+
+<!---
+  original document: 0.10.52:docs/feature_led_indicators.md
+  git diff 0.10.52 HEAD -- docs/feature_led_indicators.md | cat
+-->
+
+QMK は HID 仕様で定義された5つの LED の読み取りメソッドを提供します:
+
+* Num Lock
+* Caps Lock
+* Scroll Lock
+* Compose
+* Kana
+
+ロック LED の状態を取得するには3つの方法があります:
+* `config.h` で設定オプションを指定する
+* `bool led_update_kb(led_t led_state)` あるいは `_user(led_t led_state)` を実装する、または
+* `led_t host_keyboard_led_state()` を呼び出す
+
+!> `host_keyboard_led_state()` は `led_update_user()` が呼ばれる前に新しい値を既に反映している場合があります。
+
+LED の状態を `uint8_t` として提供する2つの非推奨の関数があります:
+
+* `uint8_t led_set_kb(uint8_t usb_led)` と `_user(uint8_t usb_led)`
+* `uint8_t host_keyboard_leds()`
+
+## 設定オプション
+
+インジケータを設定するには、`config.h` で以下の `#define` をします:
+
+| 定義                  | 既定値     | 説明                             |
+|-----------------------|------------|----------------------------------|
+| `LED_NUM_LOCK_PIN`    | *定義なし* | `Num Lock` LED を制御するピン    |
+| `LED_CAPS_LOCK_PIN`   | *定義なし* | `Caps Lock` LED を制御するピン   |
+| `LED_SCROLL_LOCK_PIN` | *定義なし* | `Scroll Lock` LED を制御するピン |
+| `LED_COMPOSE_PIN`     | *定義なし* | `Compose` LED を制御するピン     |
+| `LED_KANA_PIN`        | *定義なし* | `Kana` LED を制御するピン        |
+| `LED_PIN_ON_STATE`    | `1`        | LED が "オン" の時のインジケータピンの状態 - high の場合は`1`、low の場合は`0` |
+
+独自のキーボードを設計しているわけではない限り、通常は上記の設定オプションを変更する必要はありません。
+
+## `led_update_*()`
+
+設定オプションが十分な柔軟性を提供しない場合は、提供される API フックにより LED の挙動の独自の制御ができます。これらの関数はこれら5つの LED のいずれかの状態が変化すると呼ばれます。LED の状態を構造体のパラメータとして受け取ります。
+
+慣例により、`led_update_kb()` にそのコードを実行するようフックさせるために `led_update_user()` から `true` を返し、`led_update_kb()` でコードを実行したくない場合は `false` を返します。
+
+以下はいくつかの例です:
+
+- レイヤー表示のような何かのために LED を使うために LED を上書きする
+   - `_kb()` 関数を実行したくないので、`false`  を返します。これはレイヤーの挙動を上書きするためです。
+- LED がオンあるいはオフになった時に音楽を再生する。
+   - `_kb` 関数を実行したいので、`true` を返します。これはデフォルトの LED の挙動に追加されます。
+
+?> `led_set_*` 関数は `bool` の代わりに `void` を返すため、キーボードの LED 制御を上書きすることができません。従って、代わりに `led_update_*` を使うことをお勧めします。
+
+### `led_update_kb()` の実装例
+
+```c
+bool led_update_kb(led_t led_state) {
+    bool res = led_update_user(led_state);
+    if(res) {
+        // writePin は 1 でピンを high に、0 で low に設定します。
+        // この例では、ピンは反転していて、
+        // low/0 は LED がオンになり、high/1 は LED がオフになります。
+        // この挙動は、LED がピンと VCC の間にあるか、ピンと GND の間にあるかどうかに依存します。
+        writePin(B0, !led_state.num_lock);
+        writePin(B1, !led_state.caps_lock);
+        writePin(B2, !led_state.scroll_lock);
+        writePin(B3, !led_state.compose);
+        writePin(B4, !led_state.kana);
+    }
+    return res;
+}
+```
+
+### `led_update_user()` の実装例
+
+この不完全な例は Caps Lock がオンまたはオフになった場合に音を再生します。また LED の状態を保持する必要があるため、`true` を返します。
+
+```c
+#ifdef AUDIO_ENABLE
+  float caps_on[][2] = SONG(CAPS_LOCK_ON_SOUND);
+  float caps_off[][2] = SONG(CAPS_LOCK_OFF_SOUND);
+#endif
+
+bool led_update_user(led_t led_state) {
+    #ifdef AUDIO_ENABLE
+    static uint8_t caps_state = 0;
+    if (caps_state != led_state.caps_lock) {
+        led_state.caps_lock ? PLAY_SONG(caps_on) : PLAY_SONG(caps_off);
+        caps_state = led_state.caps_lock;
+    }
+    #endif
+    return true;
+}
+```
+
+### `led_update_*` 関数のドキュメント
+
+* キーボード/リビジョン: `bool led_update_kb(led_t led_state)`
+* キーマップ: `bool led_update_user(led_t led_state)`
+
+## `host_keyboard_led_state()`
+
+最後に受信した LED の状態を `led_t` として取得するためにこの関数を呼びます。これは、`led_update_*` の外部から、例えば [`matrix_scan_user()`](#matrix-scanning-code) の中で LED の状態を読み取るのに便利です。
+
+## 物理的な LED の状態の設定
+
+一部のキーボードの実装は、物理的な LED の状態を設定するための便利なメソッドを提供しています。
+
+### Ergodox キーボード
+
+Ergodox の実装は、個々の LED をオンあるいはオフにするために `ergodox_right_led_1`/`2`/`3_on`/`off()` と、インデックスによってそれらをオンあるいはオフにするために `ergodox_right_led_on`/`off(uint8_t led)` を提供します。
+
+さらに、LED の明度を指定することができます。全ての LED に同じ明度を指定するなら `ergodox_led_all_set(uint8_t n)` を使い、個別の LED の明度を指定するなら `ergodox_right_led_1`/`2`/`3_set(uint8_t n)` を使い、LED のインデックスを指定して明度を指定するには  `ergodox_right_led_set(uint8_t led, uint8_t n)` を使います。
+
+Ergodox キーボードは、最低の明度として `LED_BRIGHTNESS_LO` を、最高の輝度(これはデフォルトです)として `LED_BRIGHTNESS_HI` も定義しています。

docs/ja/feature_rawhid.md

@@ -0,0 +1,74 @@
+# Raw HID
+
+<!---
+  original document: 0.10.47:docs/feature_rawhid.md
+  git diff 0.10.47 HEAD -- docs/feature_rawhid.md | cat
+-->
+
+Raw HID は、HID インタフェースを介して QMK とホストコンピュータ間の双方向通信を可能にします。これには、キーマップをその場で切り替えたり、RGB LED の色とモードを変更したりなど、多くの潜在的な使用方法があります。
+
+キーボードで raw HID を機能させるには、2つの主要なコンポーネントがあります。
+
+## キーボードファームウェア
+
+ファームウェアの実装はとても簡単です。
+`rules.mk` に以下を追加します:
+
+```make
+RAW_ENABLE = yes
+```
+
+`keymap.c` に `"raw_hid.h"` を include し、以下を実装します:
+
+```C
+void raw_hid_receive(uint8_t *data, uint8_t length) {
+    // ここにコードを書きます。data はホストから受信したパケットです。
+}
+```
+
+`"raw_hid.h"` ヘッダは、キーボードからホストにパケットを送信できる `void raw_hid_send(uint8_t *data, uint8_t length);` も宣言します。例として、全てのデータをホストに返すことで、ホストアプリケーションを構築する時のデバッグに使うこともできます。
+
+```C
+void raw_hid_receive(uint8_t *data, uint8_t length) {
+    raw_hid_send(data, length);
+}
+```
+
+`raw_hid_receive` はホストから最大長 `RAW_EPSIZE` の可変サイズのパケットを受信することができます。一方、`raw_hid_send` はパケットを厳密に `RAW_EPSIZE` の長さで送信するため、長さ `RAW_EPSIZE` のデータを使う必要があります。
+
+ホスト側での作業を進める前に、raw 対応のファームウェアを書き込むようにしてください。
+
+## ホスト (Windows/macOS/Linux)
+
+これは幾つかの掘り下げが必要になるため、より複雑な部分です。
+
+ホストコンピュータを raw HID を使ってキーボードに接続するには、キーボードについての4つの情報が必要です。
+
+1. Vendor ID
+2. Product ID
+3. Usage Page
+4. Usage
+
+前半の2つは、キーボードのメインディレクトリにあるキーボードの `config.h` で、`VENDOR_ID` と `PRODUCT_ID` で簡単に見つかります。
+
+後半の2つは、キーボードのメインディレクトリにあるキーボードの `config.h` で、値を再定義することで上書きすることができます: `#define RAW_USAGE_PAGE 0xFF60` と `#define RAW_USAGE_ID 0x61`。
+
+デフォルトでは、**Usage Page** は `0xFF60` で、**Usage** は `0x61` です。
+
+### ホストの構築
+
+独自に作成したくない場合は、利用可能な HID 実装ライブラリがある任意の言語を使ってホストを構築することができます。人気のある言語でよく使われるライブラリは以下の通りです:
+
+* Node: [node-hid](https://github.com/node-hid/node-hid)。
+* C: [hidapi](https://github.com/libusb/hidapi)。
+* Java: [purejavahidapi](https://github.com/nyholku/purejavahidapi) と [hid4java](https://github.com/gary-rowe/hid4java)。
+* Python: [pyhidapi](https://pypi.org/project/hid/)。
+
+これは完全なクロスプラットフォームのリストではありませんが、最初に始めるのに十分なはずです。raw HID を使うための特別な要件は無いため、どの HID ライブラリでも動作するはずです。
+
+これで、キーボードへの HID インタフェースを開くために必要な4つの情報全てが揃いました。必要なのは、ライブラリの利用可能な関数を使って ID パラメータを使ってデバイスを開くことだけです。
+
+Vendor ID と Product ID はデバイスを開くために実際には必要ないことに注意してください。それらは接続した多くの HID デバイスから特定のデバイスをフィルターするためだけに使われます。多くのライブラリでは、代わりに製品名と製造元名を使ってデバイスを開くオプションがあります。`node-hid` が代表的な例です。これは USB ハブが組み込まれているデバイスや、同じ製品名または同じ製造元の複数のインタフェースがある特別な HID インタフェースで問題になります。Product ID と Vendor ID を合わせると単一のインタフェースの固有名を作成できるため、この問題を防げます。したがって、ライブラリで必要が無い場合でも、この問題を防ぐためにそれらを使うことをお勧めします。
+ただし、Vendor ID や Product ID と異なり、Usage Page と Usage は通信を成功させるために必要です。
+
+言うまでもなく、使っているライブラリに関係なく、終了したらインタフェースを必ず閉じる必要があります。オペレーティングシステムと特定の環境によっては、明示的に接続が閉じられていない場合、後で他のクライアントまたは同じクライアントの他のインスタンスに接続しなおした時に問題が発生する可能性があります。

docs/newbs_getting_started.md

@@ -41,6 +41,19 @@ We've tried to make QMK as easy to set up as possible. You only have to prepare
 
 ### ** Windows **
 
+QMK maintains a Bundle of MSYS2, the CLI and all necessary dependencies. It also provides a handy `QMK MSYS` terminal shortcut to boot you directly into the correct environment.
+
+#### Prerequisites
+
+You will need to install `QMK MSYS`. The latest release is available at https://msys.qmk.fm/.
+
+Alternatively, if you'd like to manually install msys2, the following section will walk you through the process.
+
+<details>
+  <summary>Manual Install</summary>
+
+?> Ignore the following steps if you use `QMK MSYS`.
+
 #### Prerequisites
 
 You will need to install MSYS2, Git and Python. Follow the installation instructions on https://www.msys2.org.
@@ -59,6 +72,8 @@ Install the QMK CLI by running:
 
     python3 -m pip install qmk
 
+</details>
+
 ### ** macOS **
 
 QMK maintains a Homebrew tap and formula which will automatically install the CLI and all necessary dependencies.
@@ -101,9 +116,9 @@ On Arch-based distros you can install the CLI from the official repositories (NO
 
     sudo pacman -S qmk
 
-You can also try the `qmk` package from AUR:
+You can also try the `qmk-git` package from AUR:
 
-    yay -S qmk
+    yay -S qmk-git
 
 ###  ** FreeBSD **
 

keyboards/alps64/keymaps/dbroqua/keymap.c

@@ -0,0 +1,61 @@
+/* Copyright 2020 Damien Broqua
+  *
+  * This program is free software: you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+  * the Free Software Foundation, either version 2 of the License, or
+  * (at your option) any later version.
+  *
+  * This program is distributed in the hope that it will be useful,
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  * GNU General Public License for more details.
+  *
+  * You should have received a copy of the GNU General Public License
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+  */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* 0: qwerty
+     * ,-----------------------------------------------------------------------------------------.
+     * | `   |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  | Backspace |
+     * |-----------------------------------------------------------------------------------------+
+     * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |  \     |
+     * |-----------------------------------------------------------------------------------------+
+     * | Caps    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+     * |-----------------------------------------------------------------------------------------+
+     * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  | RShift          |
+     * |-----------------------------------------------------------------------------------------+
+     * | Ctrl  |LGUI | LAlt  |               Space                        | RAlt   | FN  | RCtrl |
+     * `-----------------------------------------------------------------------------------------'
+     */
+  [0] = LAYOUT_all(
+    KC_GRV,  KC_1,    KC_2,    KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,     KC_MINS,  KC_EQL,   _______, KC_BSPC,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS,
+    KC_CAPS, KC_A,    KC_S,    KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN,  KC_QUOT,  KC_ENT,
+    KC_LSFT, _______, KC_Z,    KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,   KC_SLSH,  KC_RSFT,  _______,
+    KC_LCTL, KC_LGUI, KC_LALT,                 KC_SPC,                                  _______,  KC_RALT,  MO(1),    KC_RCTL
+  ),
+
+  /* FN Layer (Based on Poker 3 FN layout)
+     * ,-----------------------------------------------------------------------------------------.
+     * | Esc | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 | Delete    |
+     * |-----------------------------------------------------------------------------------------+
+     * |        |     |     |     |     |     | Calc| PgUp|  Up | PgDn|PrtSc|Scrlk|Pause|        |
+     * |-----------------------------------------------------------------------------------------+
+     * |         | Vol-| Vol+| Mute|     |     | Home| Left| Down|Right| Ins | Del |             |
+     * |-----------------------------------------------------------------------------------------+
+     * |           | App |     |     |     |     | End |     |     |     |     |                 |
+     * |-----------------------------------------------------------------------------------------+
+     * |       |     |       |                                            |        |     |       |
+     * `-----------------------------------------------------------------------------------------'
+     */
+  [1] = LAYOUT_all(
+    KC_ESC,   KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   _______, KC_DEL,
+    _______,  _______,  _______,  _______,  _______,  _______,  KC_CALC,  KC_PGUP,  KC_UP,    KC_PGDN,  KC_PSCR,  KC_SLCK,  KC_PAUS,  _______,
+    _______,  KC_VOLD,  KC_VOLU,  KC_MUTE,  _______,  _______,  KC_HOME,  KC_LEFT,  KC_DOWN,  KC_RIGHT, KC_INS,   KC_DEL,   _______,
+    _______,  _______,  KC_APP,   _______,  _______,  _______,  _______,  KC_END,   _______,  _______,  _______,  _______,  _______,  _______,
+    _______,  _______,  _______,                      _______,                                          _______,  _______,  _______,  _______
+    )
+};

keyboards/bakeneko60/readme.md

@@ -1,10 +1,10 @@
 # Bakeneko 60
 
-An open source O-ring gasket mount keyboard
+A simple 60% keyboard
 
 * Keyboard Maintainer: [kkatano](https://github.com/kkatano)
 * Hardware Supported: Bakeneko 60
-* Hardware Availability: [Open source on GitHub](https://github.com/kkatano/bakeneko-60-pcb)
+* Hardware Availability: [Open source on GitHub](https://github.com/kkatano/bakeneko-60)
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/bakeneko65/readme.md

@@ -1,10 +1,10 @@
 # Bakeneko 65
 
-An open source O-ring gasket mount keyboard
+A simple 65% keyboard
 
 * Keyboard Maintainer: [kkatano](https://github.com/kkatano)
 * Hardware Supported: Bakeneko 65
-* Hardware Availability: [Open source on GitHub](https://github.com/kkatano/bakeneko-65-pcb)
+* Hardware Availability: [Open source on GitHub](https://github.com/kkatano/bakeneko-65)
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/butterstick/butterstick.c

@@ -1,4 +1,4 @@
-/* Copyright 2019 Jeremy Bernhardt
+/* Copyright 2019 Jane Bernhardt
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

keyboards/cannonkeys/sagittarius/chconf.h

@@ -0,0 +1,714 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    rt/templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+#define _CHIBIOS_RT_CONF_VER_6_0_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_ST_RESOLUTION)
+#define CH_CFG_ST_RESOLUTION                32
+#endif
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#if !defined(CH_CFG_ST_FREQUENCY)
+#define CH_CFG_ST_FREQUENCY                 10000
+#endif
+
+/**
+ * @brief   Time intervals data size.
+ * @note    Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE               32
+#endif
+
+/**
+ * @brief   Time types data size.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE              32
+#endif
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#if !defined(CH_CFG_ST_TIMEDELTA)
+#define CH_CFG_ST_TIMEDELTA                 2
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM                 0
+#endif
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#if !defined(CH_CFG_MEMCORE_SIZE)
+#define CH_CFG_MEMCORE_SIZE                 0
+#endif
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#if !defined(CH_CFG_NO_IDLE_THREAD)
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
+#define CH_CFG_OPTIMIZE_SPEED               FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_TM)
+#define CH_CFG_USE_TM                       FALSE
+#endif
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_REGISTRY)
+#define CH_CFG_USE_REGISTRY                 TRUE
+#endif
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_WAITEXIT)
+#define CH_CFG_USE_WAITEXIT                 TRUE
+#endif
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES)
+#define CH_CFG_USE_SEMAPHORES               TRUE
+#endif
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+#endif
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MUTEXES)
+#define CH_CFG_USE_MUTEXES                  TRUE
+#endif
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+#endif
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_CONDVARS)
+#define CH_CFG_USE_CONDVARS                 TRUE
+#endif
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
+#define CH_CFG_USE_CONDVARS_TIMEOUT         FALSE
+#endif
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_EVENTS)
+#define CH_CFG_USE_EVENTS                   TRUE
+#endif
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+#endif
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MESSAGES)
+#define CH_CFG_USE_MESSAGES                 TRUE
+#endif
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+#endif
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_MAILBOXES)
+#define CH_CFG_USE_MAILBOXES                TRUE
+#endif
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMCORE)
+#define CH_CFG_USE_MEMCORE                  TRUE
+#endif
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#if !defined(CH_CFG_USE_HEAP)
+#define CH_CFG_USE_HEAP                     FALSE
+#endif
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMPOOLS)
+#define CH_CFG_USE_MEMPOOLS                 FALSE
+#endif
+
+/**
+ * @brief   Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS                FALSE
+#endif
+
+/**
+ * @brief   Pipes APIs.
+ * @details If enabled then the pipes APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_PIPES)
+#define CH_CFG_USE_PIPES                    FALSE
+#endif
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#if !defined(CH_CFG_USE_DYNAMIC)
+#define CH_CFG_USE_DYNAMIC                  FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ *          kernel.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY                  FALSE
+#endif
+
+/**
+ * @brief   Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ *          pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH     8
+#endif
+
+/**
+ * @brief   Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY     FALSE
+#endif
+
+/**
+ * @brief   Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS      FALSE
+#endif
+
+/**
+ * @brief   Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES           FALSE
+#endif
+
+/**
+ * @brief   Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES            FALSE
+#endif
+
+/**
+ * @brief   Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS            FALSE
+#endif
+
+/**
+ * @brief   Enables factory for Pipes.
+ */
+#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
+#define CH_CFG_FACTORY_PIPES                FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_STATISTICS)
+#define CH_DBG_STATISTICS                   FALSE
+#endif
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+#endif
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS                FALSE
+#endif
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+#endif
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+#endif
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+#endif
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+#endif
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS                 FALSE
+#endif
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#if !defined(CH_DBG_THREADS_PROFILING)
+#define CH_DBG_THREADS_PROFILING            FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ *          just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() {                                         \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p _thread_init() function.
+ *
+ * @note    It is invoked from within @p _thread_init() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */

keyboards/cannonkeys/sagittarius/config.h

@@ -0,0 +1,82 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xCA04
+#define PRODUCT_ID      0x0001
+#define DEVICE_VER      0x0001
+#define MANUFACTURER CannonKeys
+#define PRODUCT Sagittarius
+
+/* key matrix size */
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 16
+
+#define MATRIX_COL_PINS { A7, A5, A4, A3, A2, A1, A0, B5, A13, B2, B1, B0, B9, B8, B7, B6 }
+#define MATRIX_ROW_PINS { B10, B14, A8, A9, A10, C13, C14, C15, F0, F1 }
+#define DIODE_DIRECTION COL2ROW
+
+#define LED_NUM_LOCK_PIN B4
+#define LED_CAPS_LOCK_PIN B3
+#define LED_SCROLL_LOCK_PIN A15
+
+#define BACKLIGHT_PIN           A6
+#define BACKLIGHT_PWM_DRIVER    PWMD3
+#define BACKLIGHT_PWM_CHANNEL   1
+#define BACKLIGHT_PAL_MODE      1
+#define BACKLIGHT_LEVELS 6
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 6
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define RGBLIGHT_ANIMATIONS
+#define RGB_DI_PIN B15
+#define RGBLED_NUM 8
+#define WS2812_SPI SPID2
+#define WS2812_SPI_MOSI_PAL_MODE 0
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 2
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/cannonkeys/sagittarius/halconf.h

@@ -0,0 +1,525 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#define _CHIBIOS_HAL_CONF_
+#define _CHIBIOS_HAL_CONF_VER_7_0_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                         TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                         FALSE
+#endif
+
+/**
+ * @brief   Enables the cryptographic subsystem.
+ */
+#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
+#define HAL_USE_CRY                         FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                         FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                         FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                         FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                         FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI                     FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                         TRUE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL                      FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB                  FALSE
+#endif
+
+/**
+ * @brief   Enables the SIO subsystem.
+ */
+#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
+#define HAL_USE_SIO                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                         TRUE
+#endif
+
+/**
+ * @brief   Enables the TRNG subsystem.
+ */
+#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
+#define HAL_USE_TRNG                        FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                        FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                         TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                         FALSE
+#endif
+
+/**
+ * @brief   Enables the WSPI subsystem.
+ */
+#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
+#define HAL_USE_WSPI                        FALSE
+#endif
+
+/*===========================================================================*/
+/* PAL driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define PAL_USE_CALLBACKS                   FALSE
+#endif
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
+#define PAL_USE_WAIT                        FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE                  TRUE
+#endif
+
+/**
+ * @brief   Enforces the driver to use direct callbacks rather than OSAL events.
+ */
+#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define CAN_ENFORCE_USE_CALLBACKS           FALSE
+#endif
+
+/*===========================================================================*/
+/* CRY driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the SW fall-back of the cryptographic driver.
+ * @details When enabled, this option, activates a fall-back software
+ *          implementation for algorithms not supported by the underlying
+ *          hardware.
+ * @note    Fall-back implementations may not be present for all algorithms.
+ */
+#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_USE_FALLBACK                FALSE
+#endif
+
+/**
+ * @brief   Makes the driver forcibly use the fall-back implementations.
+ */
+#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_ENFORCE_FALLBACK            FALSE
+#endif
+
+/*===========================================================================*/
+/* DAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
+#define DAC_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define DAC_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the zero-copy API.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY                   FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS                      TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING                    TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY                      100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT                     FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING                    TRUE
+#endif
+
+/**
+ * @brief   OCR initialization constant for V20 cards.
+ */
+#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR_V20                    0x50FF8000U
+#endif
+
+/**
+ * @brief   OCR initialization constant for non-V20 cards.
+ */
+#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR                        0x80100000U
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE              38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE                 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE             1
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER           2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables circular transfers APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
+#define SPI_USE_CIRCULAR                    FALSE
+#endif
+
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/**
+ * @brief   Handling method for SPI CS line.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
+#define SPI_SELECT_MODE                     SPI_SELECT_MODE_PAD
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT                       FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION           FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                        TRUE
+#endif
+
+/*===========================================================================*/
+/* WSPI driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
+#define WSPI_USE_WAIT                       TRUE
+#endif
+
+/**
+ * @brief   Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define WSPI_USE_MUTUAL_EXCLUSION           TRUE
+#endif
+
+#endif /* HALCONF_H */
+
+/** @} */

keyboards/cannonkeys/sagittarius/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "Sagittarius",
+    "url": "https://cannonkeys.com",
+    "maintainer": "awkannan",
+    "width": 20.25,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_default": {
+            "layout": [{"x":0, "y":0}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":10.75, "y":0}, {"x":11.75, "y":0}, {"x":12.75, "y":0}, {"x":13.75, "y":0}, {"x":14.75, "y":0}, {"x":15.75, "y":0}, {"x":16.75, "y":0}, {"x":17.75, "y":0}, {"x":0, "y":1}, {"x":1.5, "y":1, "w":1.5}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":10.75, "y":1}, {"x":11.75, "y":1}, {"x":12.75, "y":1}, {"x":13.75, "y":1}, {"x":14.75, "y":1}, {"x":15.75, "y":1}, {"x":16.75, "y":1}, {"x":17.75, "y":1, "w":1.5}, {"x":0, "y":2}, {"x":1.5, "y":2, "w":1.75}, {"x":3.25, "y":2}, {"x":4.25, "y":2}, {"x":5.25, "y":2}, {"x":6.25, "y":2}, {"x":7.25, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":13, "y":2}, {"x":14, "y":2}, {"x":15, "y":2}, {"x":16, "y":2}, {"x":17, "y":2}, {"x":18, "y":2, "w":1.25}, {"x":19.25, "y":2}, {"x":0, "y":3}, {"x":1.5, "y":3, "w":1.25}, {"x":2.75, "y":3}, {"x":3.75, "y":3}, {"x":4.75, "y":3}, {"x":5.75, "y":3}, {"x":6.75, "y":3}, {"x":7.75, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":16, "y":3, "w":1.25}, {"x":17.25, "y":3}, {"x":18.25, "y":3}, {"x":1.5, "y":4, "w":1.25}, {"x":2.75, "y":4, "w":1.25}, {"x":5.5, "y":4}, {"x":6.5, "y":4, "w":2.25}, {"x":11, "y":4, "w":1.75}, {"x":12.75, "y":4}, {"x":16.25, "y":4}, {"x":17.25, "y":4}, {"x":18.25, "y":4}]
+        }
+    }
+}

keyboards/cannonkeys/sagittarius/keymaps/default/keymap.c

@@ -0,0 +1,46 @@
+/*
+Copyright 2021 Andrew Kannan
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum layer_names {
+    _BASE,
+    _FN1,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[_BASE] = LAYOUT_default(
+		KC_PGUP, KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,
+        KC_PGDN, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+        KC_HOME, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT, KC_ENT,
+        KC_END, KC_LSFT, KC_NUHS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_RSFT,
+        KC_LCTL, KC_LGUI, KC_LALT, MO(_FN1), KC_SPC, KC_SPC, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+	[_FN1] = LAYOUT_default(
+		KC_INS, KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS,
+        KC_DEL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    )
+};

keyboards/cannonkeys/sagittarius/keymaps/via/keymap.c

@@ -0,0 +1,46 @@
+/*
+Copyright 2021 Andrew Kannan
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum layer_names {
+    _BASE,
+    _FN1,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[_BASE] = LAYOUT_default(
+		KC_PGUP, KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,
+        KC_PGDN, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+        KC_HOME, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT, KC_ENT,
+        KC_END, KC_LSFT, KC_NUHS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_RSFT,
+        KC_LCTL, KC_LGUI, KC_LALT, MO(_FN1), KC_SPC, KC_SPC, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+	[_FN1] = LAYOUT_default(
+		KC_INS, KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS,
+        KC_DEL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    )
+};
+

keyboards/cannonkeys/sagittarius/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/cannonkeys/sagittarius/mcuconf.h

@@ -0,0 +1,176 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+// #define STM32F070xB
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_HSI14_ENABLED                 TRUE
+#define STM32_HSI48_ENABLED                 FALSE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE                          STM32_PPRE_DIV1
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_USBSW                         STM32_USBSW_HSI48
+#define STM32_CECSW                         STM32_CECSW_HSI
+#define STM32_I2C1SW                        STM32_I2C1SW_HSI
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         2
+#define STM32_GPT_TIM2_IRQ_PRIORITY         2
+#define STM32_GPT_TIM3_IRQ_PRIORITY         2
+#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_I2C2_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         3
+#define STM32_ICU_TIM2_IRQ_PRIORITY         3
+#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  TRUE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         3
+#define STM32_PWM_TIM2_IRQ_PRIORITY         3
+#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        3
+#define STM32_SERIAL_USART2_PRIORITY        3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  TRUE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      3
+
+#endif /* _MCUCONF_H_ */

keyboards/cannonkeys/sagittarius/readme.md

@@ -0,0 +1,10 @@
+# CannonKeys + Acheron Sagittarius
+
+* Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan)
+* Hardware Supported: STM32F072CBT6
+
+Make example for this keyboard (after setting up your build environment):
+
+    make cannonkeys/sagittarius:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/cannonkeys/sagittarius/rules.mk

@@ -0,0 +1,26 @@
+# MCU name
+MCU = STM32F072
+
+# Wildcard to allow APM32 MCU
+DFU_SUFFIX_ARGS = -p FFFF -v FFFF
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no      # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+WS2812_DRIVER = spi
+
+# Enter lower-power sleep mode when on the ChibiOS idle thread
+OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

keyboards/cannonkeys/sagittarius/sagittarius.c

@@ -0,0 +1,17 @@
+ /* Copyright 2020 Andrew Kannan
+  *
+  * This program is free software: you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+  * the Free Software Foundation, either version 2 of the License, or
+  * (at your option) any later version.
+  *
+  * This program is distributed in the hope that it will be useful,
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  * GNU General Public License for more details.
+  *
+  * You should have received a copy of the GNU General Public License
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+  */
+
+#include "sagittarius.h"

keyboards/cannonkeys/sagittarius/sagittarius.h

@@ -0,0 +1,38 @@
+ /* Copyright 2020 Andrew Kannan
+  *
+  * This program is free software: you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+  * the Free Software Foundation, either version 2 of the License, or
+  * (at your option) any later version.
+  *
+  * This program is distributed in the hope that it will be useful,
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  * GNU General Public License for more details.
+  *
+  * You should have received a copy of the GNU General Public License
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+  */
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_default( \
+    k11, k12, k13, k14, k15, k16, k17, k18, k69, k610, k611, k612, k613, k614, k615, k616, \
+    k21, k22, k23, k24, k25, k26, k27, k78, k79, k710, k711, k712, k713, k714, k715, \
+    k31, k32, k33, k34, k35, k36, k37, k88, k89, k810, k811, k812, k813, k814, k815, k816, \
+    k41, k42, k43, k44, k45, k46, k47, k48, k99, k910, k911, k912, k913, k914, k915, k916, \
+    k51, k52, k57, k58, k109, k1010, k1014, k1015, k1016 \
+) { \
+	{ k11, k12, k13, k14, k15, k16, k17, k18, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+	{ k21, k22, k23, k24, k25, k26, k27, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+	{ k31, k32, k33, k34, k35, k36, k37, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+	{ k41, k42, k43, k44, k45, k46, k47, k48, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+	{ k51, k52, KC_NO, KC_NO, KC_NO, KC_NO, k57, k58, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO },  \
+    { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k69, k610, k611, k612, k613, k614, k615, k616 }, \
+    { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k78, k79, k710, k711, k712, k713, k714, k715, KC_NO }, \
+    { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k88, k89, k810, k811, k812, k813, k814, k815, k816 }, \
+    { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k99, k910, k911, k912, k913, k914, k915, k916 }, \
+    { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k109, k1010, KC_NO, KC_NO, KC_NO, k1014, k1015, k1016 }\
+}

keyboards/crkbd/keymaps/xyverz/config.h

@@ -0,0 +1,56 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+//#define USE_MATRIX_I2C
+
+/* Select hand configuration */
+
+// #define MASTER_LEFT
+// #define MASTER_RIGHT
+#define EE_HANDS
+
+#define USE_SERIAL_PD2
+
+#define TAPPING_FORCE_HOLD
+#define TAPPING_TERM 300
+#define PERMISSIVE_HOLD
+#define IGNORE_MOD_TAP_INTERRUPT
+#define LEADER_PER_KEY_TIMING
+#define LEADER_TIMEOUT 300
+
+
+#ifdef RGBLIGHT_ENABLE
+    #undef RGBLED_NUM
+    #define RGBLIGHT_ANIMATIONS
+    #define RGBLED_NUM 27
+    #define RGBLIGHT_LIMIT_VAL 120
+    #define RGBLIGHT_HUE_STEP 10
+    #define RGBLIGHT_SAT_STEP 17
+    #define RGBLIGHT_VAL_STEP 17
+#endif
+
+#ifdef RGB_MATRIX_ENABLE
+    #define RGBLED_NUM 54  // Number of LEDs
+    #define DRIVER_LED_TOTAL RGBLED_NUM
+#endif
+
+#define OLED_FONT_H "keyboards/crkbd/lib/glcdfont.c"

keyboards/crkbd/keymaps/xyverz/keymap.c

@@ -0,0 +1,204 @@
+/*
+Copyright 2019 @foostan
+Copyright 2020 Drashna Jaelre <@drashna>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+  _DVORAK,
+  _LOWER,
+  _RAISE,
+  _ADJUST
+};
+
+enum planck_keycodes {
+  DVORAK = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST
+};
+
+// Adding macros to make the keymaps below much easier to read.
+#define DELGUI GUI_T(KC_DEL)
+#define ALTENT ALT_T(KC_ENT)
+#define SCLNCTL CTL_T(KC_SCLN)
+#define QUEALT ALT_T(KC_Q)
+#define VEEALT ALT_T(KC_V)
+#define ZEDCTL CTL_T(KC_Z)
+#define ADJUST MO(_ADJUST)
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+#define MACLOCK LGUI(LCTL(KC_Q))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_DVORAK] = LAYOUT_split_3x6_3(
+  //,-----------------------------------------------------.                    ,-----------------------------------------------------.
+       KC_TAB, KC_SCLN, KC_COMM,  KC_DOT,    KC_P,    KC_Y,                         KC_F,    KC_G,    KC_C,    KC_R,    KC_L, KC_SLSH,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+       KC_ESC,    KC_A,    KC_O,    KC_E,    KC_U,    KC_I,                         KC_D,    KC_H,    KC_T,    KC_N,    KC_S, KC_MINS,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      KC_LSFT, SCLNCTL,  QUEALT,    KC_J,    KC_K,    KC_X,                         KC_B,    KC_M,    KC_W,  VEEALT,  ZEDCTL, KC_RSFT,
+  //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
+                                            LOWER, KC_BSPC,  DELGUI,     KC_ENT,  KC_SPC,   RAISE
+                                      //`--------------------------'  `--------------------------'
+
+  ),
+
+  [_LOWER] = LAYOUT_split_3x6_3(
+  //,-----------------------------------------------------.                    ,-----------------------------------------------------.
+       KC_GRV, KC_EXLM,   KC_AT, KC_HASH,  KC_DLR, KC_PERC,                      KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSLS,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      XXXXXXX, XXXXXXX, XXXXXXX,   KC_UP, XXXXXXX, KC_HOME,                      KC_PGUP, XXXXXXX, KC_PLUS, KC_LCBR, KC_RCBR, XXXXXXX,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT,  KC_END,                      KC_PGDN, KC_MUTE, KC_VOLD, KC_VOLU, XXXXXXX, XXXXXXX,
+  //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
+                                          _______,  KC_DEL, MACLOCK,    _______,  KC_INS, _______
+                                      //`--------------------------'  `--------------------------'
+  ),
+
+  [_RAISE] = LAYOUT_split_3x6_3(
+  //,-----------------------------------------------------.                    ,-----------------------------------------------------.
+      KC_TILD,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                         KC_6,    KC_7,    KC_8,    KC_9,    KC_0, KC_PIPE,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      XXXXXXX, XXXXXXX, XXXXXXX,   KC_UP, XXXXXXX, KC_HOME,                      KC_PGUP, XXXXXXX,  KC_EQL, KC_LBRC, KC_RBRC, XXXXXXX,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT,  KC_END,                      KC_PGDN, KC_MPRV, KC_MPLY, KC_MNXT, XXXXXXX, XXXXXXX,
+  //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
+                                          _______,  KC_DEL, MACLOCK,    _______,  KC_INS, _______
+                                      //`--------------------------'  `--------------------------'
+  ),
+
+  [_ADJUST] = LAYOUT_split_3x6_3(
+  //,-----------------------------------------------------.                    ,-----------------------------------------------------.
+       KC_F11,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                        KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F12,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX,                      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX,                      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,   RESET,
+  //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
+                                          _______, _______, _______,    _______, _______, _______
+                                      //`--------------------------'  `--------------------------'
+  )
+};
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+
+#ifdef OLED_DRIVER_ENABLE
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+  if (!is_master) {
+    return OLED_ROTATION_180;  // flips the display 180 degrees if offhand
+  }
+  return rotation;
+}
+
+#define L_BASE 0
+#define L_LOWER 2
+#define L_RAISE 4
+#define L_ADJUST 8
+
+void oled_render_layer_state(void) {
+    oled_write_P(PSTR("Layer: "), false);
+    switch (layer_state) {
+        case L_BASE:
+            oled_write_ln_P(PSTR("Default"), false);
+            break;
+        case L_LOWER:
+            oled_write_ln_P(PSTR("Lower"), false);
+            break;
+        case L_RAISE:
+            oled_write_ln_P(PSTR("Raise"), false);
+            break;
+        case L_ADJUST:
+        case L_ADJUST|L_LOWER:
+        case L_ADJUST|L_RAISE:
+        case L_ADJUST|L_LOWER|L_RAISE:
+            oled_write_ln_P(PSTR("Adjust"), false);
+            break;
+    }
+}
+
+
+char keylog_str[24] = {};
+
+const char code_to_name[60] = {
+    ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
+    'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p',
+    'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z',
+    '1', '2', '3', '4', '5', '6', '7', '8', '9', '0',
+    'R', 'E', 'B', 'T', '_', '-', '=', '[', ']', '\\',
+    '#', ';', '\'', '`', ',', '.', '/', ' ', ' ', ' '};
+
+void set_keylog(uint16_t keycode, keyrecord_t *record) {
+  char name = ' ';
+    if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) ||
+        (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX)) { keycode = keycode & 0xFF; }
+  if (keycode < 60) {
+    name = code_to_name[keycode];
+  }
+
+  // update keylog
+  snprintf(keylog_str, sizeof(keylog_str), "%dx%d, k%2d : %c",
+           record->event.key.row, record->event.key.col,
+           keycode, name);
+}
+
+void oled_render_keylog(void) {
+    oled_write(keylog_str, false);
+}
+
+void render_bootmagic_status(bool status) {
+    /* Show Ctrl-Gui Swap options */
+    static const char PROGMEM logo[][2][3] = {
+        {{0x97, 0x98, 0}, {0xb7, 0xb8, 0}},
+        {{0x95, 0x96, 0}, {0xb5, 0xb6, 0}},
+    };
+    if (status) {
+        oled_write_ln_P(logo[0][0], false);
+        oled_write_ln_P(logo[0][1], false);
+    } else {
+        oled_write_ln_P(logo[1][0], false);
+        oled_write_ln_P(logo[1][1], false);
+    }
+}
+
+void oled_render_logo(void) {
+    static const char PROGMEM crkbd_logo[] = {
+        0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94,
+        0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4,
+        0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4,
+        0};
+    oled_write_P(crkbd_logo, false);
+}
+
+void oled_task_user(void) {
+    if (is_master) {
+        oled_render_layer_state();
+        oled_render_keylog();
+    } else {
+        oled_render_logo();
+    }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  if (record->event.pressed) {
+    set_keylog(keycode, record);
+  }
+  return true;
+}
+#endif // OLED_DRIVER_ENABLE

keyboards/crkbd/keymaps/xyverz/rules.mk

@@ -0,0 +1,2 @@
+OLED_DRIVER_ENABLE  = no
+RGB_MATRIX_ENABLE = yes

keyboards/dztech/dz96/config.h

@@ -0,0 +1,50 @@
+/* Copyright 2020 kb-elmo<mail@elmo.space>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x445A
+#define PRODUCT_ID      0xDB96
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    DZTECH
+#define PRODUCT         DZ96
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 13
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B7, B3, E6, F0, D5, D4, D6, C7 }
+#define MATRIX_COL_PINS { C6, F1, F4, F5, F6, F7, D7, B4, B5, D0, D1, D2, D3}
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define LED_NUM_LOCK_PIN B0
+#define LED_CAPS_LOCK_PIN B2
+#define LED_SCROLL_LOCK_PIN B1
+#define LED_PIN_ON_STATE 0
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B6
+#define BACKLIGHT_LEVELS 5
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5

keyboards/dztech/dz96/dz96.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 kb-elmo<mail@elmo.space>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "dz96.h"

keyboards/dztech/dz96/dz96.h

@@ -0,0 +1,97 @@
+/* Copyright 2020 kb-elmo<mail@elmo.space>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#pragma once
+
+#include "quantum.h"
+
+//Arrow keys and 1.75u right shift
+#define LAYOUT_default( \
+  K00, K01, K02, K03, K04, K60, K61, K62, K63, K05, K06, K07, K08, K72, K09,    K0A, K0B, K0C, K7C, \
+  K10, K11, K12, K13, K14, K64, K65, K66, K67, K15, K16, K17, K18,      K71,    K19, K1A, K1B, K1C, \
+  K20,    K21, K22, K23, K24, K68, K69, K6A, K6B, K25, K26, K27, K28,   K73,    K29, K2A, K2B, K2C, \
+  K30,     K31, K32, K33, K34, K6C, K75, K76, K77, K35, K36, K37,       K38,    K39, K3A, K3B,      \
+  K40,       K42, K43, K44, K78, K79, K7A, K7B, K45, K46, K47,     K48, K74,    K49, K4A, K4B, K4C, \
+  K50,  K51,  K52,                K59,              K55, K56, K57, K58, K53, K54,    K5A, K5B       \
+) { \
+  { K00,    K01,    K02,  K03,  K04,  K05,  K06,  K07,  K08,  K09,  K0A,  K0B,  K0C   }, \
+  { K10,    K11,    K12,  K13,  K14,  K15,  K16,  K17,  K18,  K19,  K1A,  K1B,  K1C   }, \
+  { K20,    K21,    K22,  K23,  K24,  K25,  K26,  K27,  K28,  K29,  K2A,  K2B,  K2C   }, \
+  { K30,    K31,    K32,  K33,  K34,  K35,  K36,  K37,  K38,  K39,  K3A,  K3B,  KC_NO }, \
+  { K40,    KC_NO,  K42,  K43,  K44,  K45,  K46,  K47,  K48,  K49,  K4A,  K4B,  K4C   }, \
+  { K50,    K51,    K52,  K53,  K54,  K55,  K56,  K57,  K58,  K59,  K5A,  K5B,  KC_NO }, \
+  { K60,    K61,    K62,  K63,  K64,  K65,  K66,  K67,  K68,  K69,  K6A,  K6B,  K6C   }, \
+  { KC_NO,  K71,    K72,  K73,  K74,  K75,  K76,  K77,  K78,  K79,  K7A,  K7B,  K7C   }  \
+}
+
+// Split backspace 1.5u right mods
+#define LAYOUT_split_bs_joined_right( \
+  K00, K01, K02, K03, K04, K60, K61, K62, K63, K05, K06, K07, K08, K72, K09, K0A, K0B, K0C, K7C,  \
+  K10, K11, K12, K13, K14, K64, K65, K66, K67, K15, K16, K17, K18, K70, K71, K19, K1A, K1B, K1C,  \
+  K20,   K21, K22, K23, K24, K68, K69, K6A, K6B, K25, K26, K27, K28,  K73,   K29, K2A, K2B, K2C,  \
+  K30,    K31, K32, K33, K34, K6C, K75, K76, K77, K35, K36, K37,     K38,    K39, K3A, K3B,       \
+  K40,     K42, K43, K44, K78, K79, K7A, K7B, K45, K46, K47,    K48,    K74, K49, K4A, K4B, K4C,  \
+  K50, K51, K52,                K59,                     K55, K57, K58, K53, K54, K5A, K5B        \
+) { \
+  { K00,  K01,    K02,  K03,  K04,  K05,  K06,    K07,  K08,  K09,  K0A,  K0B,  K0C   }, \
+  { K10,  K11,    K12,  K13,  K14,  K15,  K16,    K17,  K18,  K19,  K1A,  K1B,  K1C   }, \
+  { K20,  K21,    K22,  K23,  K24,  K25,  K26,    K27,  K28,  K29,  K2A,  K2B,  K2C   }, \
+  { K30,  K31,    K32,  K33,  K34,  K35,  K36,    K37,  K38,  K39,  K3A,  K3B,  KC_NO }, \
+  { K40,  KC_NO,  K42,  K43,  K44,  K45,  K46,    K47,  K48,  K49,  K4A,  K4B,  K4C   }, \
+  { K50,  K51,    K52,  K53,  K54,  K55,  KC_NO,  K57,  K58,  K59,  K5A,  K5B,  KC_NO }, \
+  { K60,  K61,    K62,  K63,  K64,  K65,  K66,    K67,  K68,  K69,  K6A,  K6B,  K6C   }, \
+  { K70,  K71,    K72,  K73,  K74,  K75,  K76,    K77,  K78,  K79,  K7A,  K7B,  K7C   }, \
+}
+
+// Split numpad (enter, 0), split shifts (right, left), split backspace
+// This layout contains every possible keycode placement
+#define LAYOUT_split_shift_and_bs( \
+  K00, K01, K02, K03, K04, K60, K61, K62, K63, K05, K06, K07, K08, K72, K09,    K0A, K0B, K0C, K7C, \
+  K10, K11, K12, K13, K14, K64, K65, K66, K67, K15, K16, K17, K18, K70, K71,    K19, K1A, K1B, K1C, \
+  K20,    K21, K22, K23, K24, K68, K69, K6A, K6B, K25, K26, K27, K28,   K73,    K29, K2A, K2B, K2C, \
+  K30,     K31, K32, K33, K34, K6C, K75, K76, K77, K35, K36, K37,       K38,    K39, K3A, K3B, K3C, \
+  K40,  K41, K42, K43, K44, K78, K79, K7A, K7B, K45, K46, K47,     K48, K74,    K49, K4A, K4B, K4C, \
+  K50,  K51,  K52,                K59,              K55, K56, K57, K58, K53, K54,    K5A, K5B, K5C  \
+) { \
+  { K00,  K01,  K02,  K03,  K04,  K05,  K06,  K07,  K08,  K09,  K0A,  K0B,  K0C },  \
+  { K10,  K11,  K12,  K13,  K14,  K15,  K16,  K17,  K18,  K19,  K1A,  K1B,  K1C },  \
+  { K20,  K21,  K22,  K23,  K24,  K25,  K26,  K27,  K28,  K29,  K2A,  K2B,  K2C },  \
+  { K30,  K31,  K32,  K33,  K34,  K35,  K36,  K37,  K38,  K39,  K3A,  K3B,  K3C },  \
+  { K40,  K41,  K42,  K43,  K44,  K45,  K46,  K47,  K48,  K49,  K4A,  K4B,  K4C },  \
+  { K50,  K51,  K52,  K53,  K54,  K55,  K56,  K57,  K58,  K59,  K5A,  K5B,  K5C },  \
+  { K60,  K61,  K62,  K63,  K64,  K65,  K66,  K67,  K68,  K69,  K6A,  K6B,  K6C },  \
+  { K70,  K71,  K72,  K73,  K74,  K75,  K76,  K77,  K78,  K79,  K7A,  K7B,  K7C },  \
+}
+
+// ISO Layout
+#define LAYOUT_iso( \
+  K00, K01, K02, K03, K04, K60, K61, K62, K63, K05, K06, K07, K08, K72, K09,    K0A, K0B, K0C, K7C, \
+  K10, K11, K12, K13, K14, K64, K65, K66, K67, K15, K16, K17, K18,      K71,    K19, K1A, K1B, K1C, \
+  K20,    K21, K22, K23, K24, K68, K69, K6A, K6B, K25, K26, K27, K28,           K29, K2A, K2B, K2C, \
+  K30,     K31, K32, K33, K34, K6C, K75, K76, K77, K35, K36, K37, K73,  K38,    K39, K3A, K3B,      \
+  K40,  K41, K42, K43, K44, K78, K79, K7A, K7B, K45, K46, K47,     K48, K74,    K49, K4A, K4B, K4C, \
+  K50,  K51,  K52,                K59,              K55, K56, K57, K58, K53, K54,    K5A, K5B       \
+) { \
+  { K00,    K01,    K02,  K03,  K04,  K05,  K06,  K07,  K08,  K09,  K0A,  K0B,  K0C   }, \
+  { K10,    K11,    K12,  K13,  K14,  K15,  K16,  K17,  K18,  K19,  K1A,  K1B,  K1C   }, \
+  { K20,    K21,    K22,  K23,  K24,  K25,  K26,  K27,  K28,  K29,  K2A,  K2B,  K2C   }, \
+  { K30,    K31,    K32,  K33,  K34,  K35,  K36,  K37,  K38,  K39,  K3A,  K3B,  KC_NO }, \
+  { K40,    K41,    K42,  K43,  K44,  K45,  K46,  K47,  K48,  K49,  K4A,  K4B,  K4C   }, \
+  { K50,    K51,    K52,  K53,  K54,  K55,  K56,  K57,  K58,  K59,  K5A,  K5B,  KC_NO }, \
+  { K60,    K61,    K62,  K63,  K64,  K65,  K66,  K67,  K68,  K69,  K6A,  K6B,  K6C   }, \
+  { KC_NO,  K71,    K72,  K73,  K74,  K75,  K76,  K77,  K78,  K79,  K7A,  K7B,  K7C   }  \
+}

keyboards/dztech/dz96/info.json

@@ -0,0 +1,454 @@
+{
+  "keyboard_name": "DZ96",
+  "keyboard_folder": "dztech/dz96",
+  "url": "",
+  "maintainer": "kb-elmo",
+  "width": 19,
+  "height": 6,
+  "layouts": {
+    "LAYOUT_default": {
+      "layout": [
+        {"label":"ESC", "x":0, "y":0},
+        {"label":"F1", "x":1, "y":0},
+        {"label":"F2", "x":2, "y":0},
+        {"label":"F3", "x":3, "y":0},
+        {"label":"F4", "x":4, "y":0},
+        {"label":"F5", "x":5, "y":0},
+        {"label":"F6", "x":6, "y":0},
+        {"label":"F7", "x":7, "y":0},
+        {"label":"F8", "x":8, "y":0},
+        {"label":"F9", "x":9, "y":0},
+        {"label":"F10", "x":10, "y":0},
+        {"label":"F11", "x":11, "y":0},
+        {"label":"F12", "x":12, "y":0},
+        {"label":"PRINT SCREEN", "x":13, "y":0},
+        {"label":"HOME", "x":14, "y":0},
+        {"label":"END", "x":15, "y":0},
+        {"label":"PAGE UP", "x":16, "y":0},
+        {"label":"PAGE DOWN", "x":17, "y":0},
+        {"label":"DELETE", "x":18, "y":0},
+
+        {"label":"GRAVE", "x":0, "y":1},
+        {"label":"1", "x":1, "y":1},
+        {"label":"2", "x":2, "y":1},
+        {"label":"3", "x":3, "y":1},
+        {"label":"4", "x":4, "y":1},
+        {"label":"5", "x":5, "y":1},
+        {"label":"6", "x":6, "y":1},
+        {"label":"7", "x":7, "y":1},
+        {"label":"8", "x":8, "y":1},
+        {"label":"9", "x":9, "y":1},
+        {"label":"0", "x":10, "y":1},
+        {"label":"MINUS", "x":11, "y":1},
+        {"label":"EQUAL", "x":12, "y":1},
+        {"label":"BACKSPACE", "x":13, "y":1, "w":2},
+        {"label":"NUM LOCK", "x":15, "y":1},
+        {"label":"KEYPAD /", "x":16, "y":1},
+        {"label":"KEYPAD *", "x":17, "y":1},
+        {"label":"KEYPAD -", "x":18, "y":1},
+
+        {"label":"TAB", "x":0, "y":2, "w":1.5},
+        {"label":"Q", "x":1.5, "y":2},
+        {"label":"W", "x":2.5, "y":2},
+        {"label":"E", "x":3.5, "y":2},
+        {"label":"R", "x":4.5, "y":2},
+        {"label":"T", "x":5.5, "y":2},
+        {"label":"Y", "x":6.5, "y":2},
+        {"label":"U", "x":7.5, "y":2},
+        {"label":"I", "x":8.5, "y":2},
+        {"label":"O", "x":9.5, "y":2},
+        {"label":"P", "x":10.5, "y":2},
+        {"label":"LBRACKET", "x":11.5, "y":2},
+        {"label":"RBRACKET", "x":12.5, "y":2},
+        {"label":"BACKSLASH", "x":13.5, "y":2, "w":1.5},
+        {"label":"KEYPAD 7", "x":15, "y":2},
+        {"label":"KEYPAD 8", "x":16, "y":2},
+        {"label":"KEYPAD 9", "x":17, "y":2},
+        {"label":"KEYPAD +", "x":18, "y":2, "h":2},
+
+        {"label":"CAPS LOCK", "x":0, "y":3, "w":1.75},
+        {"label":"A", "x":1.75, "y":3},
+        {"label":"S", "x":2.75, "y":3},
+        {"label":"D", "x":3.75, "y":3},
+        {"label":"F", "x":4.75, "y":3},
+        {"label":"G", "x":5.75, "y":3},
+        {"label":"H", "x":6.75, "y":3},
+        {"label":"J", "x":7.75, "y":3},
+        {"label":"K", "x":8.75, "y":3},
+        {"label":"L", "x":9.75, "y":3},
+        {"label":"SEMICOLON", "x":10.75, "y":3},
+        {"label":"QUOTE", "x":11.75, "y":3},
+        {"label":"ENTER", "x":12.75, "y":3, "w":2.25},
+        {"label":"KEYPAD 4", "x":15, "y":3},
+        {"label":"KEYPAD 5", "x":16, "y":3},
+        {"label":"KEYPAD 6", "x":17, "y":3},
+
+        {"label":"LSHIFT", "x":0, "y":4, "w":2.25},
+        {"label":"Z", "x":2.25, "y":4},
+        {"label":"X", "x":3.25, "y":4},
+        {"label":"C", "x":4.25, "y":4},
+        {"label":"V", "x":5.25, "y":4},
+        {"label":"B", "x":6.25, "y":4},
+        {"label":"N", "x":7.25, "y":4},
+        {"label":"M", "x":8.25, "y":4},
+        {"label":"COMMA", "x":9.25, "y":4},
+        {"label":"PERIOD", "x":10.25, "y":4},
+        {"label":"SLASH", "x":11.25, "y":4},
+        {"label":"RSHIFT", "x":12.25, "y":4, "w":1.75},
+        {"label":"UP", "x":14, "y":4},
+        {"label":"KEYPAD 1", "x":15, "y":4},
+        {"label":"KEYPAD 2", "x":16, "y":4},
+        {"label":"KEYPAD 3", "x":17, "y":4},
+        {"label":"KEYPAD ENTER", "x":18, "y":4, "h":2},
+
+        {"label":"LCTRL", "x":0, "y":5, "w":1.25},
+        {"label":"LGUI", "x":1.25, "y":5, "w":1.25},
+        {"label":"LALT", "x":2.5, "y":5, "w":1.25},
+        {"label":"SPACE", "x":3.75, "y":5, "w":6.25},
+        {"label":"RALT", "x":10, "y":5},
+        {"label":"RCTRL", "x":11, "y":5},
+        {"label":"FN", "x":12, "y":5},
+        {"label":"LEFT", "x":13, "y":5},
+        {"label":"DOWN", "x":14, "y":5},
+        {"label":"RIGHT", "x":15, "y":5},
+        {"label":"KEYPAD 0", "x":16, "y":5},
+        {"label":"KEYPAD .", "x":17, "y":5}
+      ]
+    },
+
+    "LAYOUT_split_bs_joined_right": {
+      "layout": [
+        {"label": "K00", "x": 0, "y": 0},
+        {"label": "K01", "x": 1, "y": 0},
+        {"label": "K02", "x": 2, "y": 0},
+        {"label": "K03", "x": 3, "y": 0},
+        {"label": "K04", "x": 4, "y": 0},
+        {"label": "K60", "x": 5, "y": 0},
+        {"label": "K61", "x": 6, "y": 0},
+        {"label": "K62", "x": 7, "y": 0},
+        {"label": "K63", "x": 8, "y": 0},
+        {"label": "K05", "x": 9, "y": 0},
+        {"label": "K06", "x": 10, "y": 0},
+        {"label": "K07", "x": 11, "y": 0},
+        {"label": "K08", "x": 12, "y": 0},
+        {"label": "K72", "x": 13, "y": 0},
+        {"label": "K09", "x": 14, "y": 0},
+        {"label": "K0A", "x": 15, "y": 0},
+        {"label": "K0B", "x": 16, "y": 0},
+        {"label": "K0C", "x": 17, "y": 0},
+        {"label": "K7C", "x": 18, "y": 0},
+
+        {"label": "K10", "x": 0, "y": 1},
+        {"label": "K11", "x": 1, "y": 1},
+        {"label": "K12", "x": 2, "y": 1},
+        {"label": "K13", "x": 3, "y": 1},
+        {"label": "K14", "x": 4, "y": 1},
+        {"label": "K64", "x": 5, "y": 1},
+        {"label": "K65", "x": 6, "y": 1},
+        {"label": "K66", "x": 7, "y": 1},
+        {"label": "K67", "x": 8, "y": 1},
+        {"label": "K15", "x": 9, "y": 1},
+        {"label": "K16", "x": 10, "y": 1},
+        {"label": "K17", "x": 11, "y": 1},
+        {"label": "K18", "x": 12, "y": 1},
+        {"label": "K70", "x": 13, "y": 1},
+        {"label": "K71", "x": 14, "y": 1},
+        {"label": "K19", "x": 15, "y": 1},
+        {"label": "K1A", "x": 16, "y": 1},
+        {"label": "K1B", "x": 17, "y": 1},
+        {"label": "K1C", "x": 18, "y": 1},
+
+        {"label": "K20", "x": 0, "y": 2, "w": 1.5},
+        {"label": "K21", "x": 1.5, "y": 2},
+        {"label": "K22", "x": 2.5, "y": 2},
+        {"label": "K23", "x": 3.5, "y": 2},
+        {"label": "K24", "x": 4.5, "y": 2},
+        {"label": "K68", "x": 5.5, "y": 2},
+        {"label": "K69", "x": 6.5, "y": 2},
+        {"label": "K6A", "x": 7.5, "y": 2},
+        {"label": "K6B", "x": 8.5, "y": 2},
+        {"label": "K25", "x": 9.5, "y": 2},
+        {"label": "K26", "x": 10.5, "y": 2},
+        {"label": "K27", "x": 11.5, "y": 2},
+        {"label": "K28", "x": 12.5, "y": 2},
+        {"label": "K73", "x": 13.5, "y": 2, "w": 1.5},
+        {"label": "K29", "x": 15, "y": 2},
+        {"label": "K2A", "x": 16, "y": 2},
+        {"label": "K2B", "x": 17, "y": 2},
+        {"label": "K2C", "x": 18, "y": 2, "h": 2},
+
+        {"label": "K30", "x": 0, "y": 3, "w": 1.75},
+        {"label": "K31", "x": 1.75, "y": 3},
+        {"label": "K32", "x": 2.75, "y": 3},
+        {"label": "K33", "x": 3.75, "y": 3},
+        {"label": "K34", "x": 4.75, "y": 3},
+        {"label": "K6C", "x": 5.75, "y": 3},
+        {"label": "K75", "x": 6.75, "y": 3},
+        {"label": "K76", "x": 7.75, "y": 3},
+        {"label": "K77", "x": 8.75, "y": 3},
+        {"label": "K35", "x": 9.75, "y": 3},
+        {"label": "K36", "x": 10.75, "y": 3},
+        {"label": "K37", "x": 11.75, "y": 3},
+        {"label": "K38", "x": 12.75, "y": 3, "w": 2.25},
+        {"label": "K39", "x": 15, "y": 3},
+        {"label": "K3A", "x": 16, "y": 3},
+        {"label": "K3B", "x": 17, "y": 3},
+
+        {"label": "K40", "x": 0, "y": 4, "w": 2.25},
+        {"label": "K42", "x": 2.25, "y": 4},
+        {"label": "K43", "x": 3.25, "y": 4},
+        {"label": "K44", "x": 4.25, "y": 4},
+        {"label": "K78", "x": 5.25, "y": 4},
+        {"label": "K79", "x": 6.25, "y": 4},
+        {"label": "K7A", "x": 7.25, "y": 4},
+        {"label": "K7B", "x": 8.25, "y": 4},
+        {"label": "K45", "x": 9.25, "y": 4},
+        {"label": "K46", "x": 10.25, "y": 4},
+        {"label": "K47", "x": 11.25, "y": 4},
+        {"label": "K48", "x": 12.25, "y": 4, "w": 1.75},
+        {"label": "K74", "x": 14, "y": 4},
+        {"label": "K49", "x": 15, "y": 4},
+        {"label": "K4A", "x": 16, "y": 4},
+        {"label": "K4B", "x": 17, "y": 4},
+        {"label": "K4C", "x": 18, "y": 4, "h": 2},
+
+        {"label": "K50", "x": 0, "y": 5, "w": 1.25},
+        {"label": "K51", "x": 1.25, "y": 5, "w": 1.25},
+        {"label": "K52", "x": 2.5, "y": 5, "w": 1.25},
+        {"label": "K59", "x": 3.75, "y": 5, "w": 6.25},
+        {"label": "K55", "x": 10, "y": 5, "w": 1.5},
+        {"label": "K57", "x": 11.5, "y": 5, "w": 1.5},
+        {"label": "K58", "x": 13, "y": 5},
+        {"label": "K53", "x": 14, "y": 5},
+        {"label": "K54", "x": 15, "y": 5},
+        {"label": "K5A", "x": 16, "y": 5},
+        {"label": "K5B", "x": 17, "y": 5}
+      ]
+    },
+
+    "LAYOUT_split_shift_and_bs": {
+      "layout": [
+        {"label":"ESC", "x":0, "y":0},
+        {"label":"F1", "x":1, "y":0},
+        {"label":"F2", "x":2, "y":0},
+        {"label":"F3", "x":3, "y":0},
+        {"label":"F4", "x":4, "y":0},
+        {"label":"F5", "x":5, "y":0},
+        {"label":"F6", "x":6, "y":0},
+        {"label":"F7", "x":7, "y":0},
+        {"label":"F8", "x":8, "y":0},
+        {"label":"F9", "x":9, "y":0},
+        {"label":"F10", "x":10, "y":0},
+        {"label":"F11", "x":11, "y":0},
+        {"label":"F12", "x":12, "y":0},
+        {"label":"PRINT SCREEN", "x":13, "y":0},
+        {"label":"HOME", "x":14, "y":0},
+        {"label":"END", "x":15, "y":0},
+        {"label":"PAGE UP", "x":16, "y":0},
+        {"label":"PAGE DOWN", "x":17, "y":0},
+        {"label":"DELETE", "x":18, "y":0},
+
+        {"label":"GRAVE", "x":0, "y":1},
+        {"label":"1", "x":1, "y":1},
+        {"label":"2", "x":2, "y":1},
+        {"label":"3", "x":3, "y":1},
+        {"label":"4", "x":4, "y":1},
+        {"label":"5", "x":5, "y":1},
+        {"label":"6", "x":6, "y":1},
+        {"label":"7", "x":7, "y":1},
+        {"label":"8", "x":8, "y":1},
+        {"label":"9", "x":9, "y":1},
+        {"label":"0", "x":10, "y":1},
+        {"label":"MINUS", "x":11, "y":1},
+        {"label":"EQUAL", "x":12, "y":1},
+        {"label":"BACKSPACE", "x":13, "y":1},
+        {"label":"BACKSPACE", "x":14, "y":1},
+        {"label":"NUM LOCK", "x":15, "y":1},
+        {"label":"KEYPAD /", "x":16, "y":1},
+        {"label":"KEYPAD *", "x":17, "y":1},
+        {"label":"KEYPAD -", "x":18, "y":1},
+
+        {"label":"TAB", "x":0, "y":2, "w":1.5},
+        {"label":"Q", "x":1.5, "y":2},
+        {"label":"W", "x":2.5, "y":2},
+        {"label":"E", "x":3.5, "y":2},
+        {"label":"R", "x":4.5, "y":2},
+        {"label":"T", "x":5.5, "y":2},
+        {"label":"Y", "x":6.5, "y":2},
+        {"label":"U", "x":7.5, "y":2},
+        {"label":"I", "x":8.5, "y":2},
+        {"label":"O", "x":9.5, "y":2},
+        {"label":"P", "x":10.5, "y":2},
+        {"label":"LBRACKET", "x":11.5, "y":2},
+        {"label":"RBRACKET", "x":12.5, "y":2},
+        {"label":"BACKSLASH", "x":13.5, "y":2, "w":1.5},
+        {"label":"KEYPAD 7", "x":15, "y":2},
+        {"label":"KEYPAD 8", "x":16, "y":2},
+        {"label":"KEYPAD 9", "x":17, "y":2},
+        {"label":"KEYPAD +", "x":18, "y":2},
+
+        {"label":"CAPS LOCK", "x":0, "y":3, "w":1.75},
+        {"label":"A", "x":1.75, "y":3},
+        {"label":"S", "x":2.75, "y":3},
+        {"label":"D", "x":3.75, "y":3},
+        {"label":"F", "x":4.75, "y":3},
+        {"label":"G", "x":5.75, "y":3},
+        {"label":"H", "x":6.75, "y":3},
+        {"label":"J", "x":7.75, "y":3},
+        {"label":"K", "x":8.75, "y":3},
+        {"label":"L", "x":9.75, "y":3},
+        {"label":"SEMICOLON", "x":10.75, "y":3},
+        {"label":"QUOTE", "x":11.75, "y":3},
+        {"label":"ENTER", "x":12.75, "y":3, "w":2.25},
+        {"label":"KEYPAD 4", "x":15, "y":3},
+        {"label":"KEYPAD 5", "x":16, "y":3},
+        {"label":"KEYPAD 6", "x":17, "y":3},
+        {"label":"KEYPAD +", "x":18, "y":3},
+
+        {"label":"LSHIFT", "x":0, "y":4, "w":1.25},
+        {"label":"ISO BACKSLASH", "x":1.25, "y":4},
+        {"label":"Z", "x":2.25, "y":4},
+        {"label":"X", "x":3.25, "y":4},
+        {"label":"C", "x":4.25, "y":4},
+        {"label":"V", "x":5.25, "y":4},
+        {"label":"B", "x":6.25, "y":4},
+        {"label":"N", "x":7.25, "y":4},
+        {"label":"M", "x":8.25, "y":4},
+        {"label":"COMMA", "x":9.25, "y":4},
+        {"label":"PERIOD", "x":10.25, "y":4},
+        {"label":"SLASH", "x":11.25, "y":4},
+        {"label":"RSHIFT", "x":12.25, "y":4, "w":1.75},
+        {"label":"UP", "x":14, "y":4},
+        {"label":"KEYPAD 1", "x":15, "y":4},
+        {"label":"KEYPAD 2", "x":16, "y":4},
+        {"label":"KEYPAD 3", "x":17, "y":4},
+        {"label":"KEYPAD ENTER", "x":18, "y":4},
+
+        {"label":"LCTRL", "x":0, "y":5, "w":1.25},
+        {"label":"LGUI", "x":1.25, "y":5, "w":1.25},
+        {"label":"LALT", "x":2.5, "y":5, "w":1.25},
+        {"label":"SPACE", "x":3.75, "y":5, "w":6.25},
+        {"label":"RALT", "x":10, "y":5},
+        {"label":"MENU", "x":11, "y":5},
+        {"label":"RCTRL", "x":12, "y":5},
+        {"label":"LEFT", "x":13, "y":5},
+        {"label":"DOWN", "x":14, "y":5},
+        {"label":"RIGHT", "x":15, "y":5},
+        {"label":"KEYPAD 0", "x":16, "y":5},
+        {"label":"KEYPAD .", "x":17, "y":5},
+        {"label":"KEYPAD ENTER", "x":18, "y":5}
+      ]
+    },
+
+    "LAYOUT_iso": {
+      "layout": [
+        {"label":"ESC", "x":0, "y":0},
+        {"label":"F1", "x":1, "y":0},
+        {"label":"F2", "x":2, "y":0},
+        {"label":"F3", "x":3, "y":0},
+        {"label":"F4", "x":4, "y":0},
+        {"label":"F5", "x":5, "y":0},
+        {"label":"F6", "x":6, "y":0},
+        {"label":"F7", "x":7, "y":0},
+        {"label":"F8", "x":8, "y":0},
+        {"label":"F9", "x":9, "y":0},
+        {"label":"F10", "x":10, "y":0},
+        {"label":"F11", "x":11, "y":0},
+        {"label":"F12", "x":12, "y":0},
+        {"label":"PRINT SCREEN", "x":13, "y":0},
+        {"label":"HOME", "x":14, "y":0},
+        {"label":"END", "x":15, "y":0},
+        {"label":"PAGE UP", "x":16, "y":0},
+        {"label":"PAGE DOWN", "x":17, "y":0},
+        {"label":"DELETE", "x":18, "y":0},
+
+        {"label":"GRAVE", "x":0, "y":1},
+        {"label":"1", "x":1, "y":1},
+        {"label":"2", "x":2, "y":1},
+        {"label":"3", "x":3, "y":1},
+        {"label":"4", "x":4, "y":1},
+        {"label":"5", "x":5, "y":1},
+        {"label":"6", "x":6, "y":1},
+        {"label":"7", "x":7, "y":1},
+        {"label":"8", "x":8, "y":1},
+        {"label":"9", "x":9, "y":1},
+        {"label":"0", "x":10, "y":1},
+        {"label":"MINUS", "x":11, "y":1},
+        {"label":"EQUAL", "x":12, "y":1},
+        {"label":"BACKSPACE", "x":13, "y":1, "w":2},
+        {"label":"NUM LOCK", "x":15, "y":1},
+        {"label":"KEYPAD /", "x":16, "y":1},
+        {"label":"KEYPAD *", "x":17, "y":1},
+        {"label":"KEYPAD -", "x":18, "y":1},
+
+        {"label":"TAB", "x":0, "y":2, "w":1.5},
+        {"label":"Q", "x":1.5, "y":2},
+        {"label":"W", "x":2.5, "y":2},
+        {"label":"E", "x":3.5, "y":2},
+        {"label":"R", "x":4.5, "y":2},
+        {"label":"T", "x":5.5, "y":2},
+        {"label":"Y", "x":6.5, "y":2},
+        {"label":"U", "x":7.5, "y":2},
+        {"label":"I", "x":8.5, "y":2},
+        {"label":"O", "x":9.5, "y":2},
+        {"label":"P", "x":10.5, "y":2},
+        {"label":"LBRACKET", "x":11.5, "y":2},
+        {"label":"RBRACKET", "x":12.5, "y":2},
+        {"label":"KEYPAD 7", "x":15, "y":2},
+        {"label":"KEYPAD 8", "x":16, "y":2},
+        {"label":"KEYPAD 9", "x":17, "y":2},
+        {"label":"KEYPAD +", "x":18, "y":2, "h":2},
+
+        {"label":"CAPS LOCK", "x":0, "y":3, "w":1.75},
+        {"label":"A", "x":1.75, "y":3},
+        {"label":"S", "x":2.75, "y":3},
+        {"label":"D", "x":3.75, "y":3},
+        {"label":"F", "x":4.75, "y":3},
+        {"label":"G", "x":5.75, "y":3},
+        {"label":"H", "x":6.75, "y":3},
+        {"label":"J", "x":7.75, "y":3},
+        {"label":"K", "x":8.75, "y":3},
+        {"label":"L", "x":9.75, "y":3},
+        {"label":"SEMICOLON", "x":10.75, "y":3},
+        {"label":"QUOTE", "x":11.75, "y":3},
+        {"label":"ISO HASH", "x":12.75, "y":3},
+        {"label":"ENTER", "x":13.75, "y":2, "w":1.25, "h":2},
+        {"label":"KEYPAD 4", "x":15, "y":3},
+        {"label":"KEYPAD 5", "x":16, "y":3},
+        {"label":"KEYPAD 6", "x":17, "y":3},
+
+        {"label":"LSHIFT", "x":0, "y":4, "w":1.25},
+        {"label":"ISO BACKSLASH", "x":1.25, "y":4},
+        {"label":"Z", "x":2.25, "y":4},
+        {"label":"X", "x":3.25, "y":4},
+        {"label":"C", "x":4.25, "y":4},
+        {"label":"V", "x":5.25, "y":4},
+        {"label":"B", "x":6.25, "y":4},
+        {"label":"N", "x":7.25, "y":4},
+        {"label":"M", "x":8.25, "y":4},
+        {"label":"COMMA", "x":9.25, "y":4},
+        {"label":"PERIOD", "x":10.25, "y":4},
+        {"label":"SLASH", "x":11.25, "y":4},
+        {"label":"RSHIFT", "x":12.25, "y":4, "w":1.75},
+        {"label":"UP", "x":14, "y":4},
+        {"label":"KEYPAD 1", "x":15, "y":4},
+        {"label":"KEYPAD 2", "x":16, "y":4},
+        {"label":"KEYPAD 3", "x":17, "y":4},
+        {"label":"KEYPAD ENTER", "x":18, "y":4, "h":2},
+
+        {"label":"LCTRL", "x":0, "y":5, "w":1.25},
+        {"label":"LGUI", "x":1.25, "y":5, "w":1.25},
+        {"label":"LALT", "x":2.5, "y":5, "w":1.25},
+        {"label":"SPACE", "x":3.75, "y":5, "w":6.25},
+        {"label":"RALT", "x":10, "y":5},
+        {"label":"MENU", "x":11, "y":5},
+        {"label":"RCTRL", "x":12, "y":5},
+        {"label":"LEFT", "x":13, "y":5},
+        {"label":"DOWN", "x":14, "y":5},
+        {"label":"RIGHT", "x":15, "y":5},
+        {"label":"KEYPAD 0", "x":16, "y":5},
+        {"label":"KEYPAD .", "x":17, "y":5}
+      ]
+    }
+  }
+}

keyboards/dztech/dz96/keymaps/default/keymap.c

@@ -0,0 +1,39 @@
+/* Copyright 2020 kb-elmo<mail@elmo.space>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [0] = LAYOUT_default(
+        KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_PSCR,    KC_SLCK, KC_PAUS, KC_PGUP, KC_PGDN,
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,           KC_BSPC,    KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_BSLS,    KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,                   KC_ENT,     KC_P4,   KC_P5,   KC_P6,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT, KC_UP,      KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RCTL, MO(1),   KC_LEFT, KC_DOWN, KC_RGHT,    KC_P0,   KC_PDOT
+    ),
+
+    [1] = LAYOUT_default(
+        RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD,    KC_VOLU, KC_MNXT, KC_HOME, KC_END,
+        _______, RGB_TOG, RGB_MOD, RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, _______, _______, _______, _______,          KC_DEL,     _______, _______, _______, _______,
+        _______, BL_TOGG, BL_INC,  BL_DEC,  _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,    _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______,    _______, _______, _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,    _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                            _______, _______, _______, _______, _______, _______,    _______, _______
+    ),
+};

keyboards/dztech/dz96/keymaps/iso/keymap.c

@@ -0,0 +1,39 @@
+/* Copyright 2020 kb-elmo<mail@elmo.space>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [0] = LAYOUT_iso(
+        KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_PSCR,    KC_HOME, KC_END,  KC_PGUP, KC_PGDN,
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,           KC_BSPC,    KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,                      KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS,          KC_ENT,     KC_P4,   KC_P5,   KC_P6,
+        KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT, KC_UP,      KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RCTL, MO(1),   KC_LEFT, KC_DOWN, KC_RGHT,    KC_P0,   KC_PDOT
+    ),
+
+    [1] = LAYOUT_iso(
+        RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD,    KC_VOLU, KC_MNXT, KC_HOME,  KC_END,
+        _______, RGB_TOG, RGB_MOD, RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, _______, _______, _______, _______,          KC_DEL,     _______, _______, _______, _______,
+        _______, BL_TOGG, BL_INC,  BL_DEC,  _______, _______, _______, _______, _______, _______, _______, _______, _______,                      _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,    _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,    _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                            _______, _______, _______, _______, _______, _______,    _______, _______
+    ),
+
+};

keyboards/dztech/dz96/keymaps/via/keymap.c

@@ -0,0 +1,57 @@
+/* Copyright 2020 kb-elmo<mail@elmo.space>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [0] = LAYOUT_default(
+        KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_PSCR,    KC_SLCK, KC_PAUS, KC_PGUP, KC_PGDN,
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,           KC_BSPC,    KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_BSLS,    KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,                   KC_ENT,     KC_P4,   KC_P5,   KC_P6,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT, KC_UP,      KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RCTL, MO(1),   KC_LEFT, KC_DOWN, KC_RGHT,    KC_P0,   KC_PDOT
+    ),
+
+    [1] = LAYOUT_default(
+        RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD,    KC_VOLU, KC_MNXT, KC_HOME, KC_END,
+        _______, RGB_TOG, RGB_MOD, RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, _______, _______, _______, _______,          KC_DEL,     _______, _______, _______, _______,
+        _______, BL_TOGG, BL_INC,  BL_DEC,  _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,    _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______,    _______, _______, _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,    _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                            _______, _______, _______, _______, _______, _______,    _______, _______
+    ),
+
+    [2] = LAYOUT_default(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,    _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,    _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,    _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______,    _______, _______, _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,    _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                            _______, _______, _______, _______, _______, _______,    _______, _______
+    ),
+
+    [3] = LAYOUT_default(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,    _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,    _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,    _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______,    _______, _______, _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,    _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                            _______, _______, _______, _______, _______, _______,    _______, _______
+    ),
+};

keyboards/dztech/dz96/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/dztech/dz96/readme.md

@@ -0,0 +1,15 @@
+# DZ96
+
+![Tofu96](https://i.imgur.com/MT2L6IQl.jpg)
+
+A 96% PCB made by KBDFans. Sold together with the Tofu96 DIY kit.
+
+* Keyboard Maintainer: [kb-elmo](https://github.com/kb-elmo)
+* Hardware Supported: DZ96
+* Hardware Availability: [KBDFans](https://kbdfans.com/products/tofu96-mechanical-keyboard-diy-kit)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make dztech/dz96:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/dztech/dz96/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output

keyboards/ergotaco/readme.md

@@ -4,7 +4,7 @@
 
 It's a Taco with a side of HASL. A 12 key fiesta of a board.
 
-Keyboard Maintainer: [Jeremy Bernhardt](https://github.com/germ)  
+Keyboard Maintainer: [Jane Bernhardt](https://github.com/germ)  
 Hardware Supported: ErgoTaco  
 Hardware Availability: [gboards.ca](http://gboards.ca)  
 

keyboards/evolv/chconf.h

@@ -0,0 +1,714 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    rt/templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+#define _CHIBIOS_RT_CONF_VER_6_0_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_ST_RESOLUTION)
+#define CH_CFG_ST_RESOLUTION                32
+#endif
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#if !defined(CH_CFG_ST_FREQUENCY)
+#define CH_CFG_ST_FREQUENCY                 10000
+#endif
+
+/**
+ * @brief   Time intervals data size.
+ * @note    Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE               32
+#endif
+
+/**
+ * @brief   Time types data size.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE              32
+#endif
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#if !defined(CH_CFG_ST_TIMEDELTA)
+#define CH_CFG_ST_TIMEDELTA                 2
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM                 0
+#endif
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#if !defined(CH_CFG_MEMCORE_SIZE)
+#define CH_CFG_MEMCORE_SIZE                 0
+#endif
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#if !defined(CH_CFG_NO_IDLE_THREAD)
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
+#define CH_CFG_OPTIMIZE_SPEED               FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_TM)
+#define CH_CFG_USE_TM                       FALSE
+#endif
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_REGISTRY)
+#define CH_CFG_USE_REGISTRY                 TRUE
+#endif
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_WAITEXIT)
+#define CH_CFG_USE_WAITEXIT                 TRUE
+#endif
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES)
+#define CH_CFG_USE_SEMAPHORES               TRUE
+#endif
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+#endif
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MUTEXES)
+#define CH_CFG_USE_MUTEXES                  TRUE
+#endif
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+#endif
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_CONDVARS)
+#define CH_CFG_USE_CONDVARS                 TRUE
+#endif
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
+#define CH_CFG_USE_CONDVARS_TIMEOUT         FALSE
+#endif
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_EVENTS)
+#define CH_CFG_USE_EVENTS                   TRUE
+#endif
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+#endif
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MESSAGES)
+#define CH_CFG_USE_MESSAGES                 TRUE
+#endif
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+#endif
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_MAILBOXES)
+#define CH_CFG_USE_MAILBOXES                TRUE
+#endif
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMCORE)
+#define CH_CFG_USE_MEMCORE                  FALSE
+#endif
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#if !defined(CH_CFG_USE_HEAP)
+#define CH_CFG_USE_HEAP                     FALSE
+#endif
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMPOOLS)
+#define CH_CFG_USE_MEMPOOLS                 FALSE
+#endif
+
+/**
+ * @brief   Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS                FALSE
+#endif
+
+/**
+ * @brief   Pipes APIs.
+ * @details If enabled then the pipes APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_PIPES)
+#define CH_CFG_USE_PIPES                    FALSE
+#endif
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#if !defined(CH_CFG_USE_DYNAMIC)
+#define CH_CFG_USE_DYNAMIC                  FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ *          kernel.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY                  FALSE
+#endif
+
+/**
+ * @brief   Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ *          pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH     8
+#endif
+
+/**
+ * @brief   Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY     FALSE
+#endif
+
+/**
+ * @brief   Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS      FALSE
+#endif
+
+/**
+ * @brief   Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES           FALSE
+#endif
+
+/**
+ * @brief   Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES            FALSE
+#endif
+
+/**
+ * @brief   Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS            FALSE
+#endif
+
+/**
+ * @brief   Enables factory for Pipes.
+ */
+#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
+#define CH_CFG_FACTORY_PIPES                FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_STATISTICS)
+#define CH_DBG_STATISTICS                   FALSE
+#endif
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+#endif
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS                FALSE
+#endif
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+#endif
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+#endif
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+#endif
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+#endif
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS                 FALSE
+#endif
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#if !defined(CH_DBG_THREADS_PROFILING)
+#define CH_DBG_THREADS_PROFILING            FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ *          just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() {                                         \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p _thread_init() function.
+ *
+ * @note    It is invoked from within @p _thread_init() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */

keyboards/evolv/config.h

@@ -0,0 +1,79 @@
+/*
+ Copyright 2020 Álvaro "Gondolindrim" Volpato <alvaro.volpato@usp.br>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x7865 // NA for NathanAlpha
+#define PRODUCT_ID      0x0E75 // For Evolv75
+#define DEVICE_VER      0x0001 // Revision pre-Alpha
+#define MANUFACTURER    NathanAlpha
+#define PRODUCT         Evolv75
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 16
+
+#define MATRIX_COL_PINS { A6, A5, A4, A3, A2, A1, A0, C14, F0, C15, B9, B8, B7, B6, B5, B4}
+#define MATRIX_ROW_PINS { B10, B11, A7, B0, B1, B2}
+#define DIODE_DIRECTION COL2ROW
+
+//#define BACKLIGHT_PIN           A6
+//#define BACKLIGHT_PWM_DRIVER    PWMD3
+//#define BACKLIGHT_PWM_CHANNEL   1
+//#define BACKLIGHT_PAL_MODE      1
+//#define BACKLIGHT_LEVELS 6
+//#define BACKLIGHT_BREATHING
+//#define BREATHING_PERIOD 6
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define RGB_DI_PIN B15
+#define RGBLED_NUM 16
+#define RGBLIGT_LIMIT_VAL 200
+#define RGBLIGHT_SLEEP
+#define RGBLIGHT_ANIMATIONS
+
+#define ENCODERS_PAD_A { B3 }
+#define ENCODERS_PAD_B { A15 }
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/evolv/evolv.c

@@ -0,0 +1,28 @@
+/*
+ Copyright 2020 Álvaro "Gondolindrim" Volpato <alvaro.volpato@usp.br>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "evolv.h"
+
+__attribute__((weak)) void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) { /* First encoder */
+        if (clockwise) {
+            tap_code(KC_VOLU);
+        } else {
+            tap_code(KC_VOLD);
+        }
+    } 
+}

keyboards/evolv/evolv.h

@@ -0,0 +1,54 @@
+/*
+Copyright 2020 Álvaro "Gondolindrim" Volpato <alvaro.volpato@usp.br>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define ___ KC_NO
+
+#include "quantum.h"
+
+#define LAYOUT_evolv_iso( \
+	K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,                           \
+	K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K3D,      K3F ,      \
+	K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      K2E, K1F, K0F , K2F, \
+	K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C,           K3E,      K4F ,      \
+	K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C,      K4D, K4E,                 \
+	K50, K51, K52,                K56,                K5A, K5B,      K5C, K5D, K5E                  \
+) { \
+    {  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, ___, K0F}, \
+    {  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F}, \
+    {  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F}, \
+    {  K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F}, \
+    {  K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, K4F}, \
+    {  K50, K51, K52, ___, ___, ___, K56, ___, ___, ___, K5A, K5B, K5C, K5D, K5E, ___} \
+}
+
+#define LAYOUT_evolv_ansi( \
+	K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,                           \
+	K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K3D,      K3F ,      \
+	K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      K2E, K1F, K0F , K2F, \
+	K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C,           K3E,      K4F ,      \
+	K40,      K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C,      K4D, K4E,                 \
+	K50, K51, K52,                K56,                K5A, K5B,      K5C, K5D, K5E                  \
+){ \
+    {  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, ___, K0F}, \
+    {  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F}, \
+    {  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F}, \
+    {  K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F}, \
+    {  K40, ___, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, K4F}, \
+    {  K50, K51, K52, ___, ___, ___, K56, ___, ___, ___, K5A, K5B, K5C, K5D, K5E, ___} \
+}

keyboards/evolv/halconf.h

@@ -0,0 +1,525 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#define _CHIBIOS_HAL_CONF_
+#define _CHIBIOS_HAL_CONF_VER_7_0_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                         TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                         FALSE
+#endif
+
+/**
+ * @brief   Enables the cryptographic subsystem.
+ */
+#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
+#define HAL_USE_CRY                         FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                         FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                         FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                         FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                         FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI                     FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                         FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL                      FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB                  FALSE
+#endif
+
+/**
+ * @brief   Enables the SIO subsystem.
+ */
+#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
+#define HAL_USE_SIO                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                         TRUE
+#endif
+
+/**
+ * @brief   Enables the TRNG subsystem.
+ */
+#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
+#define HAL_USE_TRNG                        FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                        FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                         TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                         FALSE
+#endif
+
+/**
+ * @brief   Enables the WSPI subsystem.
+ */
+#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
+#define HAL_USE_WSPI                        FALSE
+#endif
+
+/*===========================================================================*/
+/* PAL driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define PAL_USE_CALLBACKS                   FALSE
+#endif
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
+#define PAL_USE_WAIT                        FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE                  TRUE
+#endif
+
+/**
+ * @brief   Enforces the driver to use direct callbacks rather than OSAL events.
+ */
+#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define CAN_ENFORCE_USE_CALLBACKS           FALSE
+#endif
+
+/*===========================================================================*/
+/* CRY driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the SW fall-back of the cryptographic driver.
+ * @details When enabled, this option, activates a fall-back software
+ *          implementation for algorithms not supported by the underlying
+ *          hardware.
+ * @note    Fall-back implementations may not be present for all algorithms.
+ */
+#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_USE_FALLBACK                FALSE
+#endif
+
+/**
+ * @brief   Makes the driver forcibly use the fall-back implementations.
+ */
+#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_ENFORCE_FALLBACK            FALSE
+#endif
+
+/*===========================================================================*/
+/* DAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
+#define DAC_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define DAC_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the zero-copy API.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY                   FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS                      TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING                    TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY                      100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT                     FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING                    TRUE
+#endif
+
+/**
+ * @brief   OCR initialization constant for V20 cards.
+ */
+#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR_V20                    0x50FF8000U
+#endif
+
+/**
+ * @brief   OCR initialization constant for non-V20 cards.
+ */
+#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR                        0x80100000U
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE              38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE                 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE             1
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER           2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables circular transfers APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
+#define SPI_USE_CIRCULAR                    FALSE
+#endif
+
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/**
+ * @brief   Handling method for SPI CS line.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
+#define SPI_SELECT_MODE                     SPI_SELECT_MODE_PAD
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT                       FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION           FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                        TRUE
+#endif
+
+/*===========================================================================*/
+/* WSPI driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
+#define WSPI_USE_WAIT                       TRUE
+#endif
+
+/**
+ * @brief   Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define WSPI_USE_MUTUAL_EXCLUSION           TRUE
+#endif
+
+#endif /* HALCONF_H */
+
+/** @} */

keyboards/evolv/info.json

@@ -0,0 +1,190 @@
+{
+    "keyboard_name": "Evolv75", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 17.5, 
+    "height": 6.75, 
+    "layouts": {
+        "LAYOUT_evolv_ansi": {
+            "layout": [
+			{"label":"Esc", "x":0, "y":0.25},
+			{"label":"F1", "x":1.25, "y":0.25},
+			{"label":"F2", "x":2.25, "y":0.25},
+			{"label":"F3", "x":3.25, "y":0.25},
+			{"label":"F4", "x":4.25, "y":0.25},
+			{"label":"F5", "x":5.5, "y":0.25},
+			{"label":"F6", "x":6.5, "y":0.25},
+			{"label":"F7", "x":7.5, "y":0.25},
+			{"label":"F8", "x":8.5, "y":0.25},
+			{"label":"F9", "x":9.75, "y":0.25},
+			{"label":"F10", "x":10.75, "y":0.25},
+			{"label":"F11", "x":11.75, "y":0.25},
+			{"label":"F12", "x":12.75, "y":0.25},
+			{"label":"F13", "x":14, "y":0.25},
+			{"label":"~", "x":0, "y":1.5},
+			{"label":"!", "x":1, "y":1.5},
+			{"label":"@", "x":2, "y":1.5},
+			{"label":"#", "x":3, "y":1.5},
+			{"label":"$", "x":4, "y":1.5},
+			{"label":"%", "x":5, "y":1.5},
+			{"label":"^", "x":6, "y":1.5},
+			{"label":"&", "x":7, "y":1.5},
+			{"label":"*", "x":8, "y":1.5},
+			{"label":"(", "x":9, "y":1.5},
+			{"label":")", "x":10, "y":1.5},
+			{"label":"_", "x":11, "y":1.5},
+			{"label":"+", "x":12, "y":1.5},
+			{"label":"LBksp", "x":13, "y":1.5},
+			{"label":"RBksp", "x":14, "y":1.5},
+			{"label":"Del", "x":15.25, "y":1.5},
+			{"label":"VolUp", "x":17.75, "y":1.5},
+			{"label":"Tab", "x":0, "y":2.5, "w":1.5},
+			{"label":"Q", "x":1.5, "y":2.5},
+			{"label":"W", "x":2.5, "y":2.5},
+			{"label":"E", "x":3.5, "y":2.5},
+			{"label":"R", "x":4.5, "y":2.5},
+			{"label":"T", "x":5.5, "y":2.5},
+			{"label":"Y", "x":6.5, "y":2.5},
+			{"label":"U", "x":7.5, "y":2.5},
+			{"label":"I", "x":8.5, "y":2.5},
+			{"label":"O", "x":9.5, "y":2.5},
+			{"label":"P", "x":10.5, "y":2.5},
+			{"label":"{", "x":11.5, "y":2.5},
+			{"label":"}", "x":12.5, "y":2.5},
+			{"label":"|", "x":13.5, "y":2.5, "w":1.5},
+			{"label":"Page Up", "x":15.25, "y":2.5},
+			{"label":"Prev", "x":16.75, "y":2.5},
+			{"label":"Play", "x":17.75, "y":2.5},
+			{"label":"Next", "x":18.75, "y":2.5},
+			{"label":"Caps Lock", "x":0, "y":3.5, "w":1.75},
+			{"label":"A", "x":1.75, "y":3.5},
+			{"label":"S", "x":2.75, "y":3.5},
+			{"label":"D", "x":3.75, "y":3.5},
+			{"label":"F", "x":4.75, "y":3.5},
+			{"label":"G", "x":5.75, "y":3.5},
+			{"label":"H", "x":6.75, "y":3.5},
+			{"label":"J", "x":7.75, "y":3.5},
+			{"label":"K", "x":8.75, "y":3.5},
+			{"label":"L", "x":9.75, "y":3.5},
+			{"label":":", "x":10.75, "y":3.5},
+			{"label":"\"", "x":11.75, "y":3.5},
+			{"label":"Enter", "x":12.75, "y":3.5, "w":2.25},
+			{"label":"Page Down", "x":15.25, "y":3.5},
+			{"label":"VolDn", "x":17.75, "y":3.5},
+			{"label":"Shift", "x":0, "y":4.5, "w":2.25},
+			{"label":"Z", "x":2.25, "y":4.5},
+			{"label":"X", "x":3.25, "y":4.5},
+			{"label":"C", "x":4.25, "y":4.5},
+			{"label":"V", "x":5.25, "y":4.5},
+			{"label":"B", "x":6.25, "y":4.5},
+			{"label":"N", "x":7.25, "y":4.5},
+			{"label":"M", "x":8.25, "y":4.5},
+			{"label":"<", "x":9.25, "y":4.5},
+			{"label":">", "x":10.25, "y":4.5},
+			{"label":"?", "x":11.25, "y":4.5},
+			{"label":"Shift", "x":12.25, "y":4.5, "w":1.5},
+			{"label":"\u2191", "x":14, "y":4.75},
+			{"label":"Fn", "x":15.25, "y":4.5},
+			{"label":"Ctrl", "x":0, "y":5.5, "w":1.5},
+			{"label":"Win", "x":1.5, "y":5.5},
+			{"label":"Alt", "x":2.5, "y":5.5, "w":1.5},
+			{"x":4, "y":5.5, "w":6.25},
+			{"label":"Win", "x":10.25, "y":5.5, "w":1.25},
+			{"label":"Alt", "x":11.5, "y":5.5, "w":1.25},
+			{"label":"\u2190", "x":13, "y":5.75},
+			{"label":"\u2193", "x":14, "y":5.75},
+			{"label":"\u2192", "x":15, "y":5.75}]
+        },
+        "LAYOUT_evolv_iso": {
+            "layout": [
+			{"label":"Esc", "x":0, "y":0.25},
+			{"label":"F1", "x":1.25, "y":0.25},
+			{"label":"F2", "x":2.25, "y":0.25},
+			{"label":"F3", "x":3.25, "y":0.25},
+			{"label":"F4", "x":4.25, "y":0.25},
+			{"label":"F5", "x":5.5, "y":0.25},
+			{"label":"F6", "x":6.5, "y":0.25},
+			{"label":"F7", "x":7.5, "y":0.25},
+			{"label":"F8", "x":8.5, "y":0.25},
+			{"label":"F9", "x":9.75, "y":0.25},
+			{"label":"F10", "x":10.75, "y":0.25},
+			{"label":"F11", "x":11.75, "y":0.25},
+			{"label":"F12", "x":12.75, "y":0.25},
+			{"label":"F13", "x":14, "y":0.25},
+			{"label":"~", "x":0, "y":1.5},
+			{"label":"!", "x":1, "y":1.5},
+			{"label":"@", "x":2, "y":1.5},
+			{"label":"#", "x":3, "y":1.5},
+			{"label":"$", "x":4, "y":1.5},
+			{"label":"%", "x":5, "y":1.5},
+			{"label":"^", "x":6, "y":1.5},
+			{"label":"&", "x":7, "y":1.5},
+			{"label":"*", "x":8, "y":1.5},
+			{"label":"(", "x":9, "y":1.5},
+			{"label":")", "x":10, "y":1.5},
+			{"label":"_", "x":11, "y":1.5},
+			{"label":"+", "x":12, "y":1.5},
+			{"label":"LBksp", "x":13, "y":1.5},
+			{"label":"RBksp", "x":14, "y":1.5},
+			{"label":"Del", "x":15.25, "y":1.5},
+			{"label":"VolUp", "x":17.75, "y":1.5},
+			{"label":"Tab", "x":0, "y":2.5, "w":1.5},
+			{"label":"Q", "x":1.5, "y":2.5},
+			{"label":"W", "x":2.5, "y":2.5},
+			{"label":"E", "x":3.5, "y":2.5},
+			{"label":"R", "x":4.5, "y":2.5},
+			{"label":"T", "x":5.5, "y":2.5},
+			{"label":"Y", "x":6.5, "y":2.5},
+			{"label":"U", "x":7.5, "y":2.5},
+			{"label":"I", "x":8.5, "y":2.5},
+			{"label":"O", "x":9.5, "y":2.5},
+			{"label":"P", "x":10.5, "y":2.5},
+			{"label":"{", "x":11.5, "y":2.5},
+			{"label":"}", "x":12.5, "y":2.5},
+			{"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2},
+			{"label":"Page Up", "x":15.25, "y":2.5},
+			{"label":"Prev", "x":16.75, "y":2.5},
+			{"label":"Play", "x":17.75, "y":2.5},
+			{"label":"Next", "x":18.75, "y":2.5},
+			{"label":"Caps Lock", "x":0, "y":3.5, "w":1.75},
+			{"label":"A", "x":1.75, "y":3.5},
+			{"label":"S", "x":2.75, "y":3.5},
+			{"label":"D", "x":3.75, "y":3.5},
+			{"label":"F", "x":4.75, "y":3.5},
+			{"label":"G", "x":5.75, "y":3.5},
+			{"label":"H", "x":6.75, "y":3.5},
+			{"label":"J", "x":7.75, "y":3.5},
+			{"label":"K", "x":8.75, "y":3.5},
+			{"label":"L", "x":9.75, "y":3.5},
+			{"label":":", "x":10.75, "y":3.5},
+			{"label":"\"", "x":11.75, "y":3.5},
+			{"label":"~", "x":12.75, "y":3.5},
+			{"label":"Page Down", "x":15.25, "y":3.5},
+			{"label":"VolDn", "x":17.75, "y":3.5},
+			{"label":"Shift", "x":0, "y":4.5, "w":1.25},
+			{"label":"|", "x":1.25, "y":4.5},
+			{"label":"Z", "x":2.25, "y":4.5},
+			{"label":"X", "x":3.25, "y":4.5},
+			{"label":"C", "x":4.25, "y":4.5},
+			{"label":"V", "x":5.25, "y":4.5},
+			{"label":"B", "x":6.25, "y":4.5},
+			{"label":"N", "x":7.25, "y":4.5},
+			{"label":"M", "x":8.25, "y":4.5},
+			{"label":"<", "x":9.25, "y":4.5},
+			{"label":">", "x":10.25, "y":4.5},
+			{"label":"?", "x":11.25, "y":4.5},
+			{"label":"Shift", "x":12.25, "y":4.5, "w":1.5},
+			{"label":"\u2191", "x":14, "y":4.75},
+			{"label":"Fn", "x":15.25, "y":4.5},
+			{"label":"Ctrl", "x":0, "y":5.5, "w":1.5},
+			{"label":"Win", "x":1.5, "y":5.5},
+			{"label":"Alt", "x":2.5, "y":5.5, "w":1.5},
+			{"x":4, "y":5.5, "w":6.25},
+			{"label":"Win", "x":10.25, "y":5.5, "w":1.25},
+			{"label":"Alt", "x":11.5, "y":5.5, "w":1.25},
+			{"label":"\u2190", "x":13, "y":5.75},
+			{"label":"\u2193", "x":14, "y":5.75},
+			{"label":"\u2192", "x":15, "y":5.75}]
+        }
+    }
+}

keyboards/evolv/keymaps/default/keymap.c

@@ -0,0 +1,49 @@
+/*
+Copyright 2020 Álvaro "Gondolindrim" Volpato <alvaro.volpato@usp.br>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+   [0] = LAYOUT_evolv_ansi(
+        KC_ESC , KC_F1  , KC_F2  , KC_F3  , KC_F4  , KC_F5  , KC_F6  , KC_F7  , KC_F8  , KC_F9  , KC_F10 , KC_F11 , KC_F12 , KC_INS ,           
+	KC_GRV , KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , KC_BSPC, KC_BSPC, KC_DEL ,          KC_VOLU,
+        KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_LBRC, KC_RBRC, KC_BSLS,          KC_PGUP, KC_MPRV, KC_MPLY, KC_MNXT,
+        KC_CAPS, KC_A   , KC_S   , KC_D   , KC_F   , KC_G   , KC_H   , KC_J   , KC_K   , KC_L   , KC_SCLN, KC_QUOT, KC_ENT ,                   KC_PGDN,          KC_VOLD,
+        KC_LSFT,          KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT,          KC_UP  , MO(1)  ,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC ,                            KC_RALT, KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT),
+   [1] = LAYOUT_evolv_ansi(                                                                                                                                                  
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,           
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,           RGB_VAI,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,  RGB_MOD, RGB_TOG, RGB_MOD,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______,           RGB_VAD,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, KC_TRNS,  
+        _______, _______, _______,                            _______,                            _______, _______,          _______, _______, _______),
+   [2] = LAYOUT_evolv_ansi(                                                                                                                                                  
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,           
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______,          _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,  
+        _______, _______, _______,                            _______,                            _______, _______,          _______, _______, _______),
+   [3] = LAYOUT_evolv_ansi(                                                                                                                                                  
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,           
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______,          _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,  
+        _______, _______, _______,                            _______,                            _______, _______,          _______, _______, _______)
+};

keyboards/evolv/keymaps/iso/keymap.c

@@ -0,0 +1,49 @@
+/*
+Copyright 2020 Álvaro "Gondolindrim" Volpato <alvaro.volpato@usp.br>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+   [0] = LAYOUT_evolv_iso( 
+        KC_ESC , KC_F1  , KC_F2  , KC_F3  , KC_F4  , KC_F5  , KC_F6  , KC_F7  , KC_F8  , KC_F9  , KC_F10 , KC_F11 , KC_F12 , KC_INS ,           
+	KC_GRV , KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , KC_BSPC, KC_BSPC, KC_DEL ,          KC_VOLU,
+        KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_LBRC, KC_RBRC, KC_ENT ,          KC_PGUP, KC_MPRV, KC_MPLY, KC_MNXT,
+        KC_CAPS, KC_A   , KC_S   , KC_D   , KC_F   , KC_G   , KC_H   , KC_J   , KC_K   , KC_L   , KC_SCLN, KC_QUOT, KC_NUHS,                   KC_PGDN,          KC_VOLD,
+        KC_LSFT, KC_BSLS, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT,          KC_UP  , MO(1)  ,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC ,                            KC_RALT, KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT),
+   [1] = LAYOUT_evolv_iso(                                                                                                                                                  
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,           
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,           RGB_VAI,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,  RGB_MOD, RGB_TOG, RGB_MOD,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______,           RGB_VAD,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, KC_TRNS,  
+        _______, _______, _______,                            _______,                            _______, _______,          _______, _______, _______),
+   [2] = LAYOUT_evolv_iso(                                                                                                                                                  
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,           
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,  
+        _______, _______, _______,                            _______,                            _______, _______,          _______, _______, _______),
+   [3] = LAYOUT_evolv_iso(                                                                                                                                                  
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,           
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,  
+        _______, _______, _______,                            _______,                            _______, _______,          _______, _______, _______)
+};

keyboards/evolv/keymaps/via/keymap.c

@@ -0,0 +1,49 @@
+/*
+Copyright 2020 Álvaro "Gondolindrim" Volpato <alvaro.volpato@usp.br>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+   [0] = LAYOUT_evolv_iso( 
+        KC_ESC , KC_F1  , KC_F2  , KC_F3  , KC_F4  , KC_F5  , KC_F6  , KC_F7  , KC_F8  , KC_F9  , KC_F10 , KC_F11 , KC_F12 , KC_INS ,           
+	KC_GRV , KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , KC_BSPC, KC_BSPC, KC_DEL ,          KC_VOLU,
+        KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_LBRC, KC_RBRC, KC_ENT ,          KC_PGUP, KC_MPRV, KC_MPLY, KC_MNXT,
+        KC_CAPS, KC_A   , KC_S   , KC_D   , KC_F   , KC_G   , KC_H   , KC_J   , KC_K   , KC_L   , KC_SCLN, KC_QUOT, KC_NUHS,                   KC_PGDN,          KC_VOLD,
+        KC_LSFT, KC_BSLS, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT,          KC_UP  , MO(1)  ,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC ,                            KC_RALT, KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT),
+   [1] = LAYOUT_evolv_iso(                                                                                                                                                  
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,           
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,           RGB_VAI,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,  RGB_MOD, RGB_TOG, RGB_MOD,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______,           RGB_VAD,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, KC_TRNS,  
+        _______, _______, _______,                            _______,                            _______, _______,          _______, _______, _______),
+   [2] = LAYOUT_evolv_iso(                                                                                                                                                  
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,           
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,  
+        _______, _______, _______,                            _______,                            _______, _______,          _______, _______, _______),
+   [3] = LAYOUT_evolv_iso(                                                                                                                                                  
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,           
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,  
+        _______, _______, _______,                            _______,                            _______, _______,          _______, _______, _______)
+};

keyboards/evolv/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/evolv/mcuconf.h

@@ -0,0 +1,176 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+// #define STM32F070xB
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_HSI14_ENABLED                 TRUE
+#define STM32_HSI48_ENABLED                 FALSE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE                          STM32_PPRE_DIV1
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_USBSW                         STM32_USBSW_HSI48
+#define STM32_CECSW                         STM32_CECSW_HSI
+#define STM32_I2C1SW                        STM32_I2C1SW_HSI
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         2
+#define STM32_GPT_TIM2_IRQ_PRIORITY         2
+#define STM32_GPT_TIM3_IRQ_PRIORITY         2
+#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_I2C2_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   FALSE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         3
+#define STM32_ICU_TIM2_IRQ_PRIORITY         3
+#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         3
+#define STM32_PWM_TIM2_IRQ_PRIORITY         3
+#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        3
+#define STM32_SERIAL_USART2_PRIORITY        3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  TRUE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      3
+
+#endif /* _MCUCONF_H_ */

keyboards/evolv/readme.md

@@ -0,0 +1,15 @@
+# Evolv75 PCB QMK firmware
+
+## Introduction
+
+This is the QMK firmware repository for the Evolv75 PCB, a 75% with encoder keyboard designed by NathanAlphaMan in aprtnership with Gondolindrim.
+
+As of november 2020, there is no way to buy an Evolv75 as it has not yet entered Group Buy phase. The IC page for the keyboard can be found [here](https://geekhack.org/index.php?topic=104531).
+
+## How to compile
+
+After setting up your build environment, you can compile the Arctic default keymap by using:
+
+    make evolv:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/evolv/rules.mk

@@ -0,0 +1,23 @@
+# MCU name
+MCU = STM32F072
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = full     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+ENCODER_ENABLE = yes
+
+# Enter lower-power sleep mode when on the ChibiOS idle thread
+OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

keyboards/georgi/readme.md

@@ -6,7 +6,7 @@ A compact 20% (12x2) Split Keyboard for steno and QWERTY.
 
 [More info on qmk.fm](http://qmk.fm/georgi/)
 
-Keyboard Maintainer: [Jeremy Bernhardt](https://github.com/germ)  
+Keyboard Maintainer: [Jane Bernhardt](https://github.com/germ)  
 Hardware Supported: Georgi   
 Hardware Availability: [gboards.ca](http://gboards.ca)  
 

keyboards/gergo/readme.md

@@ -6,7 +6,7 @@ A compact 50% (14x4) Split Keyboard compatible with i2c modules and a trackball.
 
 [More info on qmk.fm](http://qmk.fm/gergo/)
 
-Keyboard Maintainer: [Jeremy Bernhardt](https://github.com/germ)  
+Keyboard Maintainer: [Jane Bernhardt](https://github.com/germ)  
 Hardware Supported: Gergo (Kit, Partial, Ready)   
 Hardware Availability: [gboards.ca](http://gboards.ca)  
 

keyboards/handwired/bigmac/bigmac.c

@@ -0,0 +1,20 @@
+/* Copyright 2020 Taylore101
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bigmac.h"
+
+// generated by KBFirmware JSON to QMK Parser
+// https://noroadsleft.github.io/kbf_qmk_converter/

keyboards/handwired/bigmac/bigmac.h

@@ -0,0 +1,36 @@
+/* Copyright 2020 Taylore101
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+    K00,   K01, K02, K03, K04, K05,    K06, K07, K08,   K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G,      \
+    K10,   K11, K12, K13, K14, K15,    K16, K17, K18,   K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G,      \
+    K20,   K21, K22, K23, K24, K25,    K26, K27, K28,   K29, K2A, K2B, K2C, K2D, K2E, K2F,    K2G,   \
+    K30,   K31, K32, K33, K34, K35,    K36, K37, K38,   K39, K3A, K3B, K3C, K3D, K3E,    K3F, K3G,   \
+    K40,   K41,    K43,   K45,         K46, K47, K48,   K49,      K4B,    K4D,      K4E, K4F, K4G    \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E,   K0F,   K0G   }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   K1E,   K1F,   K1G   }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   K2D,   K2E,   K2F,   K2G   }, \
+    { K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E,   K3F,   K3G   }, \
+    { K40,   K41,   KC_NO, K43,   KC_NO, K45,   K46,   K47,   K48,   K49,   KC_NO, K4B,   KC_NO, K4D,   K4E,   K4F,   K4G   }, \
+}
+
+// generated by KBFirmware JSON to QMK Parser
+// https://noroadsleft.github.io/kbf_qmk_converter/

keyboards/handwired/bigmac/config.h

@@ -0,0 +1,49 @@
+/* Copyright 2020 Taylore101
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x1010
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Taylore101
+#define PRODUCT         BigMac
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 17
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { F0, F1, C7, D5, B7 }
+#define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4, D3, D2, D1, D0, D4, C6, D7, E6, B4 }
+
+#define DIODE_DIRECTION COL2ROW
+
+
+// generated by KBFirmware JSON to QMK Parser
+// https://noroadsleft.github.io/kbf_qmk_converter/

keyboards/handwired/bigmac/info.json

@@ -0,0 +1,95 @@
+{
+    "keyboard_name": "BigMac",
+    "url": "",
+    "maintainer": "Taylore101",
+    "width": 19,
+    "height": 5,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"K00 (F0,B6)", "x":0, "y":0, "w":1.5},
+                {"label":"K01 (F0,B2)", "x":1.5, "y":0},
+                {"label":"K02 (F0,B3)", "x":2.5, "y":0},
+                {"label":"K03 (F0,B1)", "x":3.5, "y":0},
+                {"label":"K04 (F0,F7)", "x":4.5, "y":0},
+                {"label":"K05 (F0,F6)", "x":5.5, "y":0},
+                {"label":"K06 (F0,F5)", "x":7, "y":0},
+                {"label":"K07 (F0,F4)", "x":8, "y":0},
+                {"label":"K08 (F0,D3)", "x":9, "y":0},
+                {"label":"K09 (F0,D2)", "x":10.5, "y":0},
+                {"label":"K0A (F0,D1)", "x":11.5, "y":0},
+                {"label":"K0B (F0,D0)", "x":12.5, "y":0},
+                {"label":"K0C (F0,D4)", "x":13.5, "y":0},
+                {"label":"K0D (F0,C6)", "x":14.5, "y":0},
+                {"label":"K0E (F0,D7)", "x":15.5, "y":0},
+                {"label":"K0F (F0,E6)", "x":16.5, "y":0},
+                {"label":"K0G (F0,B4)", "x":17.5, "y":0, "w":1.5},
+                {"label":"K10 (F1,B6)", "x":0, "y":1, "w":1.5},
+                {"label":"K11 (F1,B2)", "x":1.5, "y":1},
+                {"label":"K12 (F1,B3)", "x":2.5, "y":1},
+                {"label":"K13 (F1,B1)", "x":3.5, "y":1},
+                {"label":"K14 (F1,F7)", "x":4.5, "y":1},
+                {"label":"K15 (F1,F6)", "x":5.5, "y":1},
+                {"label":"K16 (F1,F5)", "x":7, "y":1},
+                {"label":"K17 (F1,F4)", "x":8, "y":1},
+                {"label":"K18 (F1,D3)", "x":9, "y":1},
+                {"label":"K19 (F1,D2)", "x":10.5, "y":1},
+                {"label":"K1A (F1,D1)", "x":11.5, "y":1},
+                {"label":"K1B (F1,D0)", "x":12.5, "y":1},
+                {"label":"K1C (F1,D4)", "x":13.5, "y":1},
+                {"label":"K1D (F1,C6)", "x":14.5, "y":1},
+                {"label":"K1E (F1,D7)", "x":15.5, "y":1},
+                {"label":"K1F (F1,E6)", "x":16.5, "y":1},
+                {"label":"K1G (F1,B4)", "x":17.5, "y":1, "w":1.5},
+                {"label":"K20 (C7,B6)", "x":0, "y":2, "w":1.5},
+                {"label":"K21 (C7,B2)", "x":1.5, "y":2},
+                {"label":"K22 (C7,B3)", "x":2.5, "y":2},
+                {"label":"K23 (C7,B1)", "x":3.5, "y":2},
+                {"label":"K24 (C7,F7)", "x":4.5, "y":2},
+                {"label":"K25 (C7,F6)", "x":5.5, "y":2},
+                {"label":"K26 (C7,F5)", "x":7, "y":2},
+                {"label":"K27 (C7,F4)", "x":8, "y":2},
+                {"label":"K28 (C7,D3)", "x":9, "y":2},
+                {"label":"K29 (C7,D2)", "x":10.5, "y":2},
+                {"label":"K2A (C7,D1)", "x":11.5, "y":2},
+                {"label":"K2B (C7,D0)", "x":12.5, "y":2},
+                {"label":"K2C (C7,D4)", "x":13.5, "y":2},
+                {"label":"K2D (C7,C6)", "x":14.5, "y":2},
+                {"label":"K2E (C7,D7)", "x":15.5, "y":2},
+                {"label":"K2F (C7,E6)", "x":16.5, "y":2, "w":1.5},
+                {"label":"K2G (C7,B4)", "x":18, "y":2},
+                {"label":"K30 (D5,B6)", "x":0, "y":3, "w":1.5},
+                {"label":"K31 (D5,B2)", "x":1.5, "y":3},
+                {"label":"K32 (D5,B3)", "x":2.5, "y":3},
+                {"label":"K33 (D5,B1)", "x":3.5, "y":3},
+                {"label":"K34 (D5,F7)", "x":4.5, "y":3},
+                {"label":"K35 (D5,F6)", "x":5.5, "y":3},
+                {"label":"K36 (D5,F5)", "x":7, "y":3},
+                {"label":"K37 (D5,F4)", "x":8, "y":3},
+                {"label":"K38 (D5,D3)", "x":9, "y":3},
+                {"label":"K39 (D5,D2)", "x":10.5, "y":3},
+                {"label":"K3A (D5,D1)", "x":11.5, "y":3},
+                {"label":"K3B (D5,D0)", "x":12.5, "y":3},
+                {"label":"K3C (D5,D4)", "x":13.5, "y":3},
+                {"label":"K3D (D5,C6)", "x":14.5, "y":3},
+                {"label":"K3E (D5,D7)", "x":15.5, "y":3, "w":1.5},
+                {"label":"K3F (D5,E6)", "x":17, "y":3},
+                {"label":"K3G (D5,B4)", "x":18, "y":3},
+                {"label":"K40 (B7,B6)", "x":0, "y":4, "w":1.5},
+                {"label":"K41 (B7,B2)", "x":1.5, "y":4, "w":1.5},
+                {"label":"K43 (B7,B1)", "x":3, "y":4, "w":1.5},
+                {"label":"K45 (B7,F6)", "x":4.5, "y":4, "w":2},
+                {"label":"K46 (B7,F5)", "x":7, "y":4},
+                {"label":"K47 (B7,F4)", "x":8, "y":4},
+                {"label":"K48 (B7,D3)", "x":9, "y":4},
+                {"label":"K49 (B7,D2)", "x":10.5, "y":4, "w":2},
+                {"label":"K4B (B7,D0)", "x":12.5, "y":4, "w":1.5},
+                {"label":"K4D (B7,C6)", "x":14, "y":4, "w":1.5},
+                {"label":"K4E (B7,D7)", "x":16, "y":4},
+                {"label":"K4F (B7,E6)", "x":17, "y":4},
+                {"label":"K4G (B7,B4)", "x":18, "y":4}
+            ]
+        }
+    }
+    ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/"
+}

keyboards/handwired/bigmac/keymaps/default/keymap.c

@@ -0,0 +1,28 @@
+/* Copyright 2020 Taylore101
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_ESC,      KC_1,    KC_2,    KC_3,    KC_4,    KC_5,         KC_NO, 	KC_NO,	 KC_NO,		  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+        KC_TAB,      KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,         KC_7,    KC_8,    KC_9,        KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+        KC_CAPS,     KC_A,    KC_S,    KC_D,    KC_F,    KC_G,         KC_4,    KC_5,    KC_6,        KC_H,    KC_J,    KC_K,    KC_L,    KC_QUOT, KC_QUOT, KC_ENT,       KC_PGUP,
+        KC_LSFT,     KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,         KC_1,    KC_2,    KC_3,        KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LSFT,      KC_UP,   KC_PGDN,
+        KC_LCTL,     KC_LALT,      KC_LGUI,     KC_SPC,                KC_NO, KC_0,    KC_NO,   	  KC_SPC,           KC_RGUI,      KC_LCTL,          KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+};

keyboards/handwired/bigmac/readme.md

@@ -0,0 +1,6 @@
+# BIGMAC
+
+![BIGMAC](https://i.imgur.com/Jm6P8Ovl.png)
+
+A hand wired 5x17 ortholinear with a macro/num pad in the center
+Made by Taylore101 on github / thetlj on reddit

keyboards/handwired/bigmac/rules.mk

@@ -0,0 +1,25 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+
+# generated by KBFirmware JSON to QMK Parser
+# https://noroadsleft.github.io/kbf_qmk_converter/

keyboards/handwired/evk/info.json

@@ -0,0 +1,4 @@
+{
+  "manufacturer": "YangPiCui",
+  "maintainer": "YangPiCui"
+}

keyboards/handwired/evk/readme.md

@@ -0,0 +1,6 @@
+# [Ergonomic Vertical Keyboard (EVK)](https://github.com/YangPiCui/ErgonomicVerticalKeyboard)
+
+The Ergonomic Vertical Keyboard (EVK) deletes our humpback.
+
+* Maintainer: [YangPiCui](https://github.com/YangPiCui)
+* Hardware Availability: Upon Custom Ordering

keyboards/handwired/evk/v1_3/config.h

@@ -0,0 +1,148 @@
+/*
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Yang Cui
+#define PRODUCT evk v1_3
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 16
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS \
+    { B0, B1, B2, B3, B7, D0 }
+#define MATRIX_COL_PINS \
+    { D1, D2, D3, C6, C7, F0, F1, F4, F5, F6, F7, B6, B5, B4, D7, D6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION ROW2COL // the current flows into the rows and then out of the columns
+
+/* define whiche Pins to use for the status LEDs*/
+#define LED_CAPS_LOCK_PIN D4
+
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+// #define SOFT_SERIAL_PIN D2  // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/handwired/evk/v1_3/info.json

@@ -0,0 +1,101 @@
+{
+    "keyboard_name": "Ergonomic Vertical Keyboard (EVK) version 1.3 with Teensy 2.0",
+    "url": "https://github.com/YangPiCui/ErgonomicVerticalKeyboard",
+    "maintainer": "YangPiCui",
+    "width": 22.75,
+    "height": 7.5,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"k0A", "x":0, "y":0.5, "w":1.25, "h":1.25},
+                {"label":"k0B", "x":1.25, "y":0.25, "w":1.25, "h":1.25},
+                {"label":"k0C", "x":2.5, "y":0, "w":1.25, "h":1.25},
+                {"label":"k0D", "x":3.75, "y":0.25, "w":1.25, "h":1.25},
+                {"label":"k0E", "x":5, "y":0.25, "w":1.25, "h":1.25},
+                {"label":"k0F", "x":6.25, "y":0.25, "w":1.25, "h":1.25},
+                {"label":"k0G", "x":8.75, "y":0.25, "w":1.25, "h":1.25},
+                {"label":"k0H", "x":10, "y":0.25, "w":1.25, "h":1.25},
+                {"label":"k0I", "x":11.25, "y":0.25, "w":1.25, "h":1.25},
+                {"label":"k0J", "x":12.5, "y":0.25, "w":1.25, "h":1.25},
+                {"label":"k0K", "x":15.25, "y":0.25, "w":1.25, "h":1.25},
+                {"label":"k0L", "x":16.5, "y":0.25, "w":1.25, "h":1.25},
+                {"label":"k0M", "x":17.75, "y":0.25, "w":1.25, "h":1.25},
+                {"label":"k0N", "x":19, "y":0, "w":1.25, "h":1.25},
+                {"label":"k0O", "x":20.25, "y":0.25, "w":1.25, "h":1.25},
+                {"label":"k0P", "x":21.5, "y":0.5, "w":1.25, "h":1.25},
+                {"label":"k1A", "x":0, "y":1.75, "w":1.25, "h":1.25},
+                {"label":"k1B", "x":1.25, "y":1.5, "w":1.25, "h":1.25},
+                {"label":"k1C", "x":2.5, "y":1.25, "w":1.25, "h":1.25},
+                {"label":"k1D", "x":3.75, "y":1.5, "w":1.25, "h":1.25},
+                {"label":"k1E", "x":5, "y":1.5, "w":1.25, "h":1.25},
+                {"label":"k1F", "x":6.25, "y":1.5, "w":1.25, "h":1.25},
+                {"label":"k1G", "x":8.75, "y":1.5, "w":1.25, "h":1.25},
+                {"label":"k1H", "x":10, "y":1.5, "w":1.25, "h":1.25},
+                {"label":"k1I", "x":11.25, "y":1.5, "w":1.25, "h":1.25},
+                {"label":"k1J", "x":12.5, "y":1.5, "w":1.25, "h":1.25},
+                {"label":"k1K", "x":15.25, "y":1.5, "w":1.25, "h":1.25},
+                {"label":"k1L", "x":16.5, "y":1.5, "w":1.25, "h":1.25},
+                {"label":"k1M", "x":17.75, "y":1.5, "w":1.25, "h":1.25},
+                {"label":"k1N", "x":19, "y":1.25, "w":1.25, "h":1.25},
+                {"label":"k1O", "x":20.25, "y":1.5, "w":1.25, "h":1.25},
+                {"label":"k1P", "x":21.5, "y":1.75, "w":1.25, "h":1.25},
+                {"label":"k2A", "x":0, "y":3, "w":1.25, "h":1.25},
+                {"label":"k2B", "x":1.25, "y":2.75, "w":1.25, "h":1.25},
+                {"label":"k2C", "x":2.5, "y":2.5, "w":1.25, "h":1.25},
+                {"label":"k2D", "x":3.75, "y":2.75, "w":1.25, "h":1.25},
+                {"label":"k2E", "x":5, "y":2.75, "w":1.25, "h":1.25},
+                {"label":"k2F", "x":6.25, "y":2.75, "w":1.25, "h":1.25},
+                {"label":"k2G", "x":8.75, "y":2.75, "w":1.25, "h":1.25},
+                {"label":"k2H", "x":10, "y":2.75, "w":1.25, "h":1.25},
+                {"label":"k2I", "x":11.25, "y":2.75, "w":1.25, "h":1.25},
+                {"label":"k2J", "x":12.5, "y":2.75, "w":1.25, "h":1.25},
+                {"label":"k2K", "x":15.25, "y":2.75, "w":1.25, "h":1.25},
+                {"label":"k2L", "x":16.5, "y":2.75, "w":1.25, "h":1.25},
+                {"label":"k2M", "x":17.75, "y":2.75, "w":1.25, "h":1.25},
+                {"label":"k2N", "x":19, "y":2.5, "w":1.25, "h":1.25},
+                {"label":"k2O", "x":20.25, "y":2.75, "w":1.25, "h":1.25},
+                {"label":"k2P", "x":21.5, "y":3, "w":1.25, "h":1.25},
+                {"label":"k3A", "x":0, "y":4.25, "w":1.25, "h":1.25},
+                {"label":"k3B", "x":1.25, "y":4, "w":1.25, "h":1.25},
+                {"label":"k3C", "x":2.5, "y":3.75, "w":1.25, "h":1.25},
+                {"label":"k3D", "x":3.75, "y":4, "w":1.25, "h":1.25},
+                {"label":"k3E", "x":5, "y":4, "w":1.25, "h":1.25},
+                {"label":"k3F", "x":6.75, "y":4.5, "w":1.25, "h":1.25},
+                {"label":"k3G", "x":8.75, "y":4, "w":1.25, "h":1.25},
+                {"label":"k3H", "x":10, "y":4, "w":1.25, "h":1.25},
+                {"label":"k3I", "x":11.25, "y":4, "w":1.25, "h":1.25},
+                {"label":"k3J", "x":12.5, "y":4, "w":1.25, "h":1.25},
+                {"label":"k3K", "x":14.75, "y":4.5, "w":1.25, "h":1.25},
+                {"label":"k3L", "x":16.5, "y":4, "w":1.25, "h":1.25},
+                {"label":"k3M", "x":17.75, "y":4, "w":1.25, "h":1.25},
+                {"label":"k3N", "x":19, "y":3.75, "w":1.25, "h":1.25},
+                {"label":"k3O", "x":20.25, "y":4, "w":1.25, "h":1.25},
+                {"label":"k3P", "x":21.5, "y":4.25, "w":1.25, "h":1.25},
+                {"label":"k4A", "x":0, "y":5.5, "w":1.25, "h":1.25},
+                {"label":"k4B", "x":1.25, "y":5.25, "w":1.25, "h":1.25},
+                {"label":"k4C", "x":2.5, "y":5, "w":1.25, "h":1.25},
+                {"label":"k4D", "x":3.75, "y":5.25, "w":1.25, "h":1.25},
+                {"label":"k4E", "x":5.5, "y":5.75, "w":1.25, "h":1.25},
+                {"label":"k4F", "x":6.75, "y":5.75, "w":1.25, "h":1.25},
+                {"label":"k4G", "x":8.75, "y":5.25, "w":1.25, "h":1.25},
+                {"label":"k4H", "x":10, "y":5.25, "w":1.25, "h":1.25},
+                {"label":"k4I", "x":11.25, "y":5.25, "w":1.25, "h":1.25},
+                {"label":"k4J", "x":12.5, "y":5.25, "w":1.25, "h":1.25},
+                {"label":"k4K", "x":14.75, "y":5.75, "w":1.25, "h":1.25},
+                {"label":"k4L", "x":16, "y":5.75, "w":1.25, "h":1.25},
+                {"label":"k4M", "x":17.75, "y":5.25, "w":1.25, "h":1.25},
+                {"label":"k4N", "x":19, "y":5, "w":1.25, "h":1.25},
+                {"label":"k4O", "x":20.25, "y":5.25, "w":1.25, "h":1.25},
+                {"label":"k4P", "x":21.5, "y":5.5, "w":1.25, "h":1.25},
+                {"label":"k5B", "x":1.25, "y":6.5, "w":1.25, "h":1.25},
+                {"label":"k5C", "x":2.5, "y":6.25, "w":1.25, "h":1.25},
+                {"label":"k5G", "x":8.75, "y":6.5, "w":1.25, "h":1.25},
+                {"label":"k5H", "x":10, "y":6.5, "w":1.25, "h":1.25},
+                {"label":"k5I", "x":11.25, "y":6.5, "w":1.25, "h":1.25},
+                {"label":"k5J", "x":12.5, "y":6.5, "w":1.25, "h":1.25},
+                {"label":"k5N", "x":19, "y":6.25, "w":1.25, "h":1.25},
+                {"label":"k5O", "x":20.25, "y":6.5, "w":1.25, "h":1.25}
+            ]
+        }
+    }
+}

keyboards/handwired/evk/v1_3/keymaps/default/keymap.c

@@ -0,0 +1,34 @@
+/* 
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(/* Base Layer (0th Layer) - default Layout */
+                 KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     KC_ESC,       TG(1),    KC_PSCR,   KC_INS,  KC_APP,        KC_CAPS,  KC_6,     KC_7,     KC_8,     KC_9,    KC_0,
+                 KC_Q,     KC_H,     KC_R,     KC_F,     KC_X,     KC_LBRC,      KC_F1,    KC_F2,    KC_F3,    KC_F4,         KC_RBRC,  KC_BSPC,  KC_Y,     KC_O,     KC_U,    KC_J, 
+                 KC_L,     KC_S,     KC_N,     KC_T,     KC_D,     KC_END,       KC_F5,    KC_F6,    KC_F7,    KC_F8,         KC_DEL,   KC_P,     KC_I,     KC_A,     KC_E,    KC_K, 
+                 KC_Z,     KC_M,     KC_C,     KC_V,     KC_B,      KC_LCTL,     KC_F9,    KC_F10,   KC_F11,   KC_F12,       KC_RCTL,   KC_W,     KC_G,     KC_COMM,  KC_DOT,  KC_ENT, 
+                 KC_LALT,  KC_MINS,  KC_EQL,   KC_TAB,    KC_SPC,   KC_LGUI,     KC_HOME,  KC_UP,    KC_END,   KC_PGUP,      KC_RGUI,  KC_SPC,    KC_QUOT,  KC_SCLN,  KC_SLSH, KC_RALT,
+	                       KC_LSFT,  KC_GRV,                                     KC_LEFT,  KC_DOWN,  KC_RGHT,  KC_PGDN,                                     KC_BSLS,  KC_RSFT
+				 ),
+    [1] = LAYOUT(/* 1st Layer - Numpad Keys */
+                 _______,  _______,  _______,  _______,  _______,  _______,      _______,  KC_SLCK,  KC_PAUS,  _______,       _______,  _______,  _______,  _______,  _______,  _______,
+                 _______,  _______,  _______,  _______,  _______,  _______,      _______,  KC_PSLS,  KC_PAST,  KC_PMNS,       _______,  _______,  _______,  _______,  _______,  _______,
+                 _______,  _______,  _______,  _______,  _______,  _______,      KC_P7,    KC_P8,    KC_P9,    KC_PPLS,       _______,  _______,  _______,  _______,  _______,  _______,
+                 _______,  _______,  _______,  _______,  _______,   _______,     KC_P4,    KC_P5,    KC_P6,    KC_PPLS,      _______,   _______,  _______,  _______,  _______,  _______,
+                 _______,  _______,  _______,  _______,   _______,  _______,     KC_P1,    KC_P2,    KC_P3,    KC_PEQL,      _______,  _______,   _______,  _______,  _______,  _______,
+                           _______,  _______,                                    KC_P0,    KC_P0,    KC_PDOT,  KC_PENT,                                     _______,  _______
+                 )
+};

keyboards/handwired/evk/v1_3/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for this version of the EVK

keyboards/handwired/evk/v1_3/readme.md

@@ -0,0 +1,10 @@
+# [Ergonomic Vertical Keyboard (EVK)](https://github.com/YangPiCui/ErgonomicVerticalKeyboard) version 1.3 with Teensy 2.0
+
+* Keyboard Maintainer: [YangPiCui](https://github.com/YangPiCui)
+* Hardware Supported: Ergonomic Vertical Keyboard (EVK) version 1.3 with Teensy 2.0
+
+Make example for this keyboard (after setting up your build environment):
+
+    make handwired/evk/v1_3:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/handwired/evk/v1_3/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = halfkay
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output

keyboards/handwired/evk/v1_3/v1_3.c

@@ -0,0 +1,58 @@
+/*
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "v1_3.h"
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+// For reference, visit https://docs.qmk.fm/#/custom_quantum_functions?id=layer-change-code
+
+// keyboard start-up codes
+// runs once when the firmware starts up
+void matrix_init_kb(void) {
+    // Set the LEDs pins
+    setPinOutput(D5); // Layer 1 Status LED
+
+    matrix_init_user();
+}
+
+// looping keyboard codes
+// runs every cycle (a lot)
+/*void matrix_scan_kb(void) {
+
+    matrix_scan_user();
+}*/
+
+// per-action keyboard codes
+// runs for every key-press action, just before processing by the firmware
+/*bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+
+    return process_record_user(keycode, record);
+}*/
+
+// Set LED based on layer
+__attribute__((weak)) layer_state_t layer_state_set_user(layer_state_t state) {
+    writePin(D5, layer_state_cmp(state, 1));
+    return state;
+}
+
+bool led_update_kb(led_t led_state) {
+    bool res = led_update_user(led_state);
+    if (res) {
+        // writePin sets the pin high for 1 and low for 0.
+        writePin(D4, led_state.caps_lock);
+    }
+    return res;
+}

keyboards/handwired/evk/v1_3/v1_3.h

@@ -0,0 +1,43 @@
+/*
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define XXX KC_NO
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT(\
+    k0A, k0B, k0C, k0D, k0E, k0F,    k0G, k0H, k0I, k0J,    k0K, k0L, k0M, k0N, k0O, k0P, \
+    k1A, k1B, k1C, k1D, k1E, k1F,    k1G, k1H, k1I, k1J,    k1K, k1L, k1M, k1N, k1O, k1P, \
+    k2A, k2B, k2C, k2D, k2E, k2F,    k2G, k2H, k2I, k2J,    k2K, k2L, k2M, k2N, k2O, k2P, \
+    k3A, k3B, k3C, k3D, k3E,  k3F,   k3G, k3H, k3I, k3J,   k3K,  k3L, k3M, k3N, k3O, k3P, \
+    k4A, k4B, k4C, k4D,  k4E, k4F,   k4G, k4H, k4I, k4J,   k4K, k4L,  k4M, k4N, k4O, k4P, \
+	     k5B, k5C,                   k5G, k5H, k5I, k5J,                   k5N, k5O      \
+) { \
+    { k0A, k0B, k0C, k0D, k0E, k0F,    k0G, k0H, k0I, k0J,    k0K, k0L, k0M, k0N, k0O, k0P }, \
+    { k1A, k1B, k1C, k1D, k1E, k1F,    k1G, k1H, k1I, k1J,    k1K, k1L, k1M, k1N, k1O, k1P }, \
+    { k2A, k2B, k2C, k2D, k2E, k2F,    k2G, k2H, k2I, k2J,    k2K, k2L, k2M, k2N, k2O, k2P }, \
+    { k3A, k3B, k3C, k3D, k3E,  k3F,   k3G, k3H, k3I, k3J,   k3K,  k3L, k3M, k3N, k3O, k3P }, \
+    { k4A, k4B, k4C, k4D,  k4E, k4F,   k4G, k4H, k4I, k4J,   k4K, k4L,  k4M, k4N, k4O, k4P }, \
+    { XXX, k5B, k5C, XXX, XXX, XXX,    k5G, k5H, k5I, k5J,    XXX, XXX, XXX, k5N, k5O, XXX } \
+}

keyboards/handwired/onekey/pytest/readme.md

@@ -1,3 +0,0 @@
-# PyTest onekey
-
-This is used by the python test framework. It's probably not useful otherwise.

keyboards/handwired/onekey/pytest/rules.mk

@@ -1,2 +0,0 @@
-# MCU name
-MCU = STM32F303

keyboards/handwired/pytest/basic/keymaps/default/keymap.c

@@ -0,0 +1,5 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    LAYOUT_ortho_1x1(KC_A)
+};

keyboards/handwired/pytest/basic/keymaps/default_json/keymap.json

@@ -1,9 +1,9 @@
 {
-    "keyboard": "handwired/onekey/pytest",
+    "keyboard": "handwired/pytest/basic",
     "keymap": "default_json",
     "layout": "LAYOUT_ortho_1x1",
     "layers": [["KC_A"]],
     "author": "qmk",
-    "notes": "This file is a keymap.json file for handwired/onekey/pytest",
+    "notes": "This file is a keymap.json file for handwired/pytest/basic",
     "version": 1
 }

keyboards/handwired/pytest/basic/rules.mk

@@ -0,0 +1 @@
+MCU = atmega32u4

keyboards/handwired/pytest/config.h

@@ -0,0 +1,18 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6465
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    none
+#define PRODUCT         pytest
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 1
+
+#define MATRIX_COL_PINS { F4 }
+#define MATRIX_ROW_PINS { F5 }
+#define DIODE_DIRECTION COL2ROW

keyboards/handwired/pytest/has_community/rules.mk

@@ -0,0 +1,3 @@
+MCU = atmega32u4
+
+LAYOUTS = ortho_1x1

keyboards/handwired/pytest/has_template/keymaps/default/keymap.c

@@ -0,0 +1,5 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    LAYOUT_ortho_1x1(KC_A)
+};

keyboards/handwired/pytest/has_template/keymaps/default_json/keymap.json

@@ -0,0 +1,9 @@
+{
+    "keyboard": "handwired/pytest/has_template",
+    "keymap": "default_json",
+    "layout": "LAYOUT_ortho_1x1",
+    "layers": [["KC_A"]],
+    "author": "qmk",
+    "notes": "This file is a keymap.json file for handwired/pytest/has_template",
+    "version": 1
+}

keyboards/handwired/pytest/has_template/rules.mk

@@ -0,0 +1 @@
+MCU = atmega32u4

keyboards/handwired/pytest/has_template/templates/keymap.json

@@ -1,3 +1,3 @@
 {
-  "documentation": "This file is a keymap.json file for handwired/onekey/pytest"
+  "documentation": "This file is a keymap.json file for handwired/pytest/has_template"
 }

keyboards/handwired/pytest/pytest.h

@@ -0,0 +1,11 @@
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_ortho_1x1( \
+    k00 \
+) { \
+    { k00 } \
+}
+
+#define LAYOUT LAYOUT_ortho_1x1

keyboards/handwired/swiftrax/joypad/config.h

@@ -0,0 +1,52 @@
+/*
+Copyright 2020 Swiftrax <swiftrax@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x04D8
+#define PRODUCT_ID      0xEA68
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Swiftrax
+#define PRODUCT         Joypad
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 4
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS { C6, B3, B0, B1, D6, D5 }
+#define MATRIX_COL_PINS { C7, B4, D0, C2 }
+
+#define ENCODERS_PAD_A { C5 }
+#define ENCODERS_PAD_B { C4 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/*EEPROM for via*/
+#define DYNAMIC_KEYMAP_LAYER_COUNT 3

keyboards/handwired/swiftrax/joypad/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "Joypad", 
+    "url": "https://github.com/swiftrax", 
+    "maintainer": "swiftrax", 
+    "width": 4, 
+    "height": 6.25, 
+    "layouts": {
+        "LAYOUT_ortho_6x4": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1.25}, {"x":1, "y":1.25}, {"x":2, "y":1.25}, {"x":3, "y":1.25}, {"x":0, "y":2.25}, {"x":1, "y":2.25}, {"x":2, "y":2.25}, {"x":3, "y":2.25}, {"x":0, "y":3.25}, {"x":1, "y":3.25}, {"x":2, "y":3.25}, {"x":3, "y":3.25}, {"x":0, "y":4.25}, {"x":1, "y":4.25}, {"x":2, "y":4.25}, {"x":3, "y":4.25}, {"x":0, "y":5.25}, {"x":1, "y":5.25}, {"x":2, "y":5.25}, {"x":3, "y":5.25}]
+        }
+    }
+}

keyboards/handwired/swiftrax/joypad/joypad.c

@@ -0,0 +1,16 @@
+/* Copyright 2020 swiftrax
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "joypad.h"

keyboards/handwired/swiftrax/joypad/joypad.h

@@ -0,0 +1,33 @@
+/* Copyright 2020 swiftrax
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+#define LAYOUT_ortho_6x4( \
+    K00, K01, K02, K03, \
+    K10, K11, K12, K13, \
+    K20, K21, K22, K23, \
+    K30, K31, K32, K33, \
+    K40, K41, K42, K43, \
+    K50, K51, K52, K53 \
+) { \
+	{K00, K01, K02, K03}, \
+    {K10, K11, K12, K13}, \
+    {K20, K21, K22, K23}, \
+    {K30, K31, K32, K33}, \
+    {K40, K41, K42, K43}, \
+    {K50, K51, K52, K53}  \
+}

keyboards/handwired/swiftrax/joypad/keymaps/default/keymap.c

@@ -0,0 +1,36 @@
+  /* Copyright 2020 swiftrax
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[0] = LAYOUT_ortho_6x4(
+  KC_MUTE, KC_F13 , KC_F14 , KC_F15 ,
+  KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+  KC_P7  , KC_P8  , KC_P9  , KC_PPLS,
+  KC_P4  , KC_P5  , KC_P6  , KC_PPLS,
+  KC_P1  , KC_P2  , KC_P3  , KC_PENT,
+  KC_P0  , KC_P0  , KC_PDOT, KC_PENT),
+
+};
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (clockwise) {
+        tap_code(KC_VOLU);
+    } else {
+        tap_code(KC_VOLD);
+    }
+}

keyboards/handwired/swiftrax/joypad/keymaps/via/keymap.c

@@ -0,0 +1,51 @@
+/* Copyright 2020 swiftrax
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[0] = LAYOUT_ortho_6x4(
+  KC_MUTE, KC_F13 , KC_F14 , KC_F15 ,
+  KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+  KC_P7  , KC_P8  , KC_P9  , KC_PPLS,
+  KC_P4  , KC_P5  , KC_P6  , KC_PPLS,
+  KC_P1  , KC_P2  , KC_P3  , KC_PENT,
+  KC_P0  , KC_P0  , KC_PDOT, KC_PENT),
+
+[1] = LAYOUT_ortho_6x4(
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+[2] = LAYOUT_ortho_6x4(
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+};
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (clockwise) {
+        tap_code(KC_VOLU);
+    } else {
+        tap_code(KC_VOLD);
+    }
+}

keyboards/handwired/swiftrax/joypad/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/handwired/swiftrax/joypad/readme.md

@@ -0,0 +1,13 @@
+# Joypad
+
+Numberpad with 1 encoder
+
+* Keyboard Maintainer: Swiftrax
+* Hardware Supported: Joypad PCB
+* Hardware Availability: https://github.com/swiftrax
+
+Make example for this keyboard (after setting up your build environment):
+
+    make handwired/swiftrax/joypad:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/handwired/swiftrax/joypad/rules.mk

@@ -0,0 +1,23 @@
+# MCU name
+MCU = atmega32u2
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+ENCODER_ENABLE = yes

keyboards/handwired/tennie/keymaps/default/config.h

@@ -17,3 +17,4 @@
 #pragma once
 
 // place overrides here
+#define TAPPING_TOGGLE 2