update "Breaking Changes" doc

This reverts commit 7259126e8d67e83a9bd48dcf0914be1849d638b5.

.travis.yml

@@ -27,6 +27,7 @@ addons:
 install:
   - npm install -g moxygen
 script:
+  - git fetch --depth=50 origin $TRAVIS_BRANCH:$TRAVIS_BRANCH
   - git rev-parse --short HEAD
   - git diff --name-only HEAD $TRAVIS_BRANCH
   - bash util/travis_test.sh

bootloader.mk

@@ -27,6 +27,7 @@
 # qmk-dfu        QMK DFU (LUFA + blinkenlight)
 # bootloadHID    HIDBootFlash compatible (ATmega32A)
 # USBasp         USBaspLoader (ATmega328P)
+# kiibohd        Input:Club Kiibohd bootloader (only used on their boards)
 #
 # BOOTLOADER_SIZE can still be defined manually, but it's recommended
 # you add any possible configuration to this list
@@ -89,7 +90,19 @@ ifeq ($(strip $(BOOTLOADER)), lufa-ms)
     BOOTLOADER_SIZE = 6144
     FIRMWARE_FORMAT = bin
 endif
-
 ifdef BOOTLOADER_SIZE
     OPT_DEFS += -DBOOTLOADER_SIZE=$(strip $(BOOTLOADER_SIZE))
 endif
+
+ifeq ($(strip $(BOOTLOADER)), kiibohd)
+    OPT_DEFS += -DBOOTLOADER_KIIBOHD
+    ifeq ($(strip $(MCU_ORIG)), MK20DX128)
+        MCU_LDSCRIPT = MK20DX128BLDR4
+    endif
+    ifeq ($(strip $(MCU_ORIG)), MK20DX256)
+        MCU_LDSCRIPT = MK20DX256BLDR8
+    endif
+
+    DFU_ARGS = -d 1C11:B007
+    DFU_SUFFIX_ARGS = -v 1C11 -p B007
+endif

build_keyboard.mk

@@ -16,7 +16,6 @@ include common.mk
 KEYBOARD_FILESAFE := $(subst /,_,$(KEYBOARD))
 TARGET ?= $(KEYBOARD_FILESAFE)_$(KEYMAP)
 KEYBOARD_OUTPUT := $(BUILD_DIR)/obj_$(KEYBOARD_FILESAFE)
-STM32_PATH := quantum/stm32
 
 # Force expansion
 TARGET := $(TARGET)
@@ -138,7 +137,7 @@ endif
 
 ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes)
     TARGET := $(TARGET)_proton_c
-    include $(STM32_PATH)/proton_c.mk
+    include platforms/chibios/GENERIC_STM32_F303XC/configs/proton_c.mk
     OPT_DEFS += -DCONVERT_TO_PROTON_C
 endif
 
@@ -148,12 +147,6 @@ endif
 
 include quantum/mcu_selection.mk
 
-ifdef MCU_FAMILY
-    OPT_DEFS += -DQMK_STM32
-    KEYBOARD_PATHS += $(STM32_PATH)
-endif
-
-
 # Find all the C source files to be compiled in subfolders.
 KEYBOARD_SRC :=
 

common_features.mk

@@ -264,7 +264,7 @@ ifeq ($(strip $(BACKLIGHT_CUSTOM_DRIVER)), yes)
     BACKLIGHT_DRIVER := custom
 endif
 
-VALID_BACKLIGHT_TYPES := pwm software custom
+VALID_BACKLIGHT_TYPES := pwm timer software custom
 
 BACKLIGHT_ENABLE ?= no
 BACKLIGHT_DRIVER ?= pwm
@@ -304,6 +304,12 @@ ifeq ($(strip $(WS2812_DRIVER_REQUIRED)), yes)
         SRC += ws2812.c
     else
         SRC += ws2812_$(strip $(WS2812_DRIVER)).c
+
+        ifeq ($(strip $(PLATFORM)), CHIBIOS)
+            ifeq ($(strip $(WS2812_DRIVER)), pwm)
+                OPT_DEFS += -DSTM32_DMA_REQUIRED=TRUE
+            endif
+        endif
     endif
 
     # add extra deps
@@ -529,3 +535,19 @@ ifeq ($(strip $(AUTO_SHIFT_ENABLE)), yes)
         OPT_DEFS += -DAUTO_SHIFT_MODIFIERS
     endif
 endif
+
+JOYSTICK_ENABLE ?= no
+ifneq ($(strip $(JOYSTICK_ENABLE)), no)
+    OPT_DEFS += -DJOYSTICK_ENABLE
+    SRC += $(QUANTUM_DIR)/process_keycode/process_joystick.c
+    SRC += $(QUANTUM_DIR)/joystick.c
+endif
+
+ifeq ($(strip $(JOYSTICK_ENABLE)), analog)
+    OPT_DEFS += -DANALOG_JOYSTICK_ENABLE
+    SRC += analog.c
+endif
+
+ifeq ($(strip $(JOYSTICK_ENABLE)), digital)
+    OPT_DEFS += -DDIGITAL_JOYSTICK_ENABLE
+endif

docs/ChangeLog/20200829.md

@@ -0,0 +1,148 @@
+# QMK Breaking Change - 2020 Aug 29 Changelog
+
+Four times a year QMK runs a process for merging Breaking Changes. A Breaking Change is any change which modifies how QMK behaves in a way that is incompatible or potentially dangerous. We limit these changes to 4 times per year so that users can have confidence that updating their QMK tree will not break their keymaps.
+
+
+## Changes Requiring User Action :id=changes-requiring-user-action
+
+### Relocated Keyboards :id-relocated-keyboards
+
+#### The Key Company project consolidation ([#9547](https://github.com/qmk/qmk_firmware/pull/9547))
+#### relocating boards by flehrad to flehrad/ folder ([#9635](https://github.com/qmk/qmk_firmware/pull/9635))
+
+Keyboards released by The Key Company and keyboards designed by flehrad have moved to vendor folders. If you own any of the keyboards listed below, please use the new names to compile your firmware moving forward.
+
+Old Name               | New Name
+:--------------------- | :------------------
+candybar/lefty         | tkc/candybar/lefty
+candybar/righty        | tkc/candybar/righty
+m0lly                  | tkc/m0lly
+tkc1800                | tkc/tkc1800
+bigswitch              | flehrad/bigswitch
+handwired/downbubble   | flehrad/downbubble
+handwired/numbrero     | flehrad/numbrero
+snagpad                | flehrad/snagpad
+handwired/tradestation | flehrad/tradestation
+
+### Updated Keyboard Codebases :id=keyboard-updates
+
+#### Keebio RGB wiring update ([#7754](https://github.com/qmk/qmk_firmware/pull/7754))
+
+This pull request changes the configuration for Keebio split boards to use the same RGB strip wiring for each half, which provides the following improvements:
+
+* Easier wiring due to one fewer wire needed (the wire between left DOut to extra data pin) and the fact that wiring is the same for both halves.
+* RGB LEDs can be controlled by each half now instead of just master half.
+* Extra data line is freed up to allow for I2C usage instead of serial.
+
+If you have customized the value of `RGBLED_SPLIT` for your keymap, you will need to undefine it using `#undef RGBLED_SPLIT` before defining it to your customized value.
+
+This change affects:
+
+* BFO-9000
+* Fourier
+* Iris rev2
+* Levinson, revs. 1 and 2
+* Nyquist, revs. 1 and 2
+* Quefrency rev1
+* Viterbi, revs. 1 and 2
+
+### Changes to Core Functionality :id=core-updates
+
+* Bigger Combo index ([#9318](https://github.com/qmk/qmk_firmware/pull/9318))
+
+Allows the Combo feature to support more than 256 combos.
+
+Any fork that uses `process_combo_event` needs to update the function's first argument to `uint16_t`:
+
+* Old function: `void process_combo_event(uint8_t combo_index, bool pressed)`
+* New function: `void process_combo_event(uint16_t combo_index, bool pressed)`
+
+
+## Core Changes :id=core-changes
+
+### Fixes :id=core-fixes
+
+* Mousekeys: scrolling acceleration is no longer coupled to mouse movement acceleration ([#9174](https://github.com/qmk/qmk_firmware/pull/9174))
+* Keymap Extras: correctly assign Question Mark in Czech layout ([#9987](https://github.com/qmk/qmk_firmware/pull/9987))
+
+### Additions and Enhancements :id=core-additions
+
+* allow for WS2812 PWM to work on DMAMUX-capable devices ([#9471](https://github.com/qmk/qmk_firmware/pull/9471))
+  * Newer STM32 MCUs have a DMAMUX peripheral, which allows mapping of DMAs to different DMA streams, rather than hard-defining the target streams in silicon.
+  * Affects STM32L4+ devices, as well as the soon-to-be-supported-by-QMK STM32G4/H7 families.
+  * Tested on F303/Proton C (ChibiOS v19, non-DMAMUX), G474 (ChibiOS v20, with DMAMUX).
+* dual-bank STM32 bootloader support ([#8778](https://github.com/qmk/qmk_firmware/pull/8778) and [#9738](https://github.com/qmk/qmk_firmware/pull/9738))
+  * Adds support for STM32 dual-bank flash bootloaders, by toggling a GPIO during early init in order to charge an RC circuit attached to `BOOT0`.
+  * The main rationale behind this is that dual-bank STM32 devices unconditionally execute user-mode code, regardless of whether or not the user-mode code jumps to the bootloader. If either flash bank is valid (and `BOOT0` is low), then the built-in bootloader will skip any sort of DFU.
+  * This PR allows for the initialisation sequencing to charge the RC circuit based on the example circuit posted on Discord, effectively pulling `BOOT0` high before issuing the system reset. As the RC circuit takes a while to discharge, the system reset executes the ROM bootloader which subsequently sees `BOOT0` high, and starts executing the DFU routines.
+  * Tested with STM32L082 (with current QMK+current ChibiOS), and STM32G474 (against ChibiOS 20.x).
+* update Space Cadet and Tap Dance features to use Custom Tapping Term when appropriate ([#6259](https://github.com/qmk/qmk_firmware/pull/6259))
+  * For the Tap Dance feature, this completely removes the need for the `ACTION_TAP_DANCE_FN_ADVANCED_TIME` dance.
+* HID Joystick Interface ([#4226](https://github.com/qmk/qmk_firmware/pull/4226) and [#9949](https://github.com/qmk/qmk_firmware/pull/9949 "Fix Joystick Compile Issues"))
+  * This implements a joystick feature, including a joystick_task function called from TMK, specific keycodes for joystick buttons and a USB HID interface.
+  * Tested on V-USB backend and Proton C; compiles but untested on LUFA.
+  * In order to test, you have to add `JOYSTICK_ENABLE = yes` to your `rules.mk` and
+    ```c
+    #define JOYSTICK_BUTTON_COUNT 8
+    #define JOYSTICK_AXES_COUNT 2
+    ```
+    in your config.h.
+* Christmas RGB Underglow animation now fades between green and red ([#7648](https://github.com/qmk/qmk_firmware/pull/7648))
+  * `RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL` has been greatly decreased; please check your animation if you have customized this value.
+* layer state now initializes on startup ([#8318](https://github.com/qmk/qmk_firmware/pull/8318))
+  * This should produce more consistent behavior between the two functions and layer masks.
+* added support for HSV->RGB conversion without using CIE curve ([#9856](https://github.com/qmk/qmk_firmware/pull/9856))
+* added NOEEPROM functions for RGB Matrix ([#9487](https://github.com/qmk/qmk_firmware/pull/9487))
+  * Added eeprom_helpers for toggle, mode, sethsv, speed, similar to rgblight versions.
+  * Added set_speed function.
+  * Added helper functions, similar to those in rgblight, in order to add NOEEPROM versions of toggle, step, hue, sat, val, and speed.
+  * Minor: spelling correction for EEPROM in a debug message.
+* flashing firmware using `st-flash` utility from [STLink Tools](https://github.com/stlink-org/stlink) is now supported ([#9964](https://github.com/qmk/qmk_firmware/pull/9964))
+* add ability to dump all makefile variables for the specified target ([#8256](https://github.com/qmk/qmk_firmware/pull/8256))
+  * Adds a new subtarget to builds, `dump_vars`, which allows for printing out all the variables that make knows about, after all substitutions occur.
+  * Example: `make handwired/onekey/proton_c:default:dump_vars`
+* add ability to change the Auto Shift timeout in real time ([#8441](https://github.com/qmk/qmk_firmware/pull/8441))
+* added a timer implementation for backlight on ChibiOS ([#8291](https://github.com/qmk/qmk_firmware/pull/8291))
+* added a third endpoint to V-USB keyboards ([#9020](https://github.com/qmk/qmk_firmware/pull/9020))
+* added a method to read the OLED display buffer from user space ([#8777](https://github.com/qmk/qmk_firmware/pull/8777))
+* K-Type refactor ([#9864](https://github.com/qmk/qmk_firmware/pull/9864))
+  * The K-Type has been refactored to use QMK's native matrix scanning routine, and now has partial support for the RGB Matrix feature.
+* Joysticks can now be used without defining analog pins ([#10169](https://github.com/qmk/qmk_firmware/pull/10169))
+
+### Clean-ups and Optimizations :id=core-optimizations
+
+* iWRAP protocol removed ([#9284](https://github.com/qmk/qmk_firmware/pull/9284))
+* work begun for consolidation of ChibiOS platform files ([#8327](https://github.com/qmk/qmk_firmware/pull/8327) and [#9315](https://github.com/qmk/qmk_firmware/pull/9315))
+  * Start of the consolidation work to move the ChibiOS board definitions as well as the default set of configuration files for existing board definitions used by keyboards.
+    * Uses `/platforms/chibios` as previously discussed on discord.
+    * Consolidates the Proton C configs into the generic F303 definitions.
+    * Allows for defining a default set of `chconf.h`, `halconf.h`, and `mcuconf.h` files within the platform definition, which is able to be overridden by the keyboard directly, though include path ordering.
+    * Adds template `chconf.h`, `halconf.h`, `mcuconf.h`, and `board.h` that can be dropped into a keyboard directory, in order to override rather than replace the entire contents of the respective files.
+    * Removed Proton C QMK board definitions, falling back to ChibiOS board definitions with QMK overrides.
+* Various tidy-ups for USB descriptor code ([#9005](https://github.com/qmk/qmk_firmware/pull/9005))
+  * Renamed `keyboard_led_stats` in lufa.c and ChibiOS usb_main.c to `keyboard_led_state`, as well as `vusb_keyboard_leds`, for consistency
+  * Formatted CDC and MIDI descriptors better
+  * Removed `ENDPOINT_CONFIG` macro, it seems pointless and removes the need for endpoint address defines in the middle of the endpoint numbering enum
+  * Fixed (possibly?) V-USB `GET_REPORT` request handling. Not sure about this one, but the existing code appears to always return an empty report - now `send_keyboard` sets this variable to the current report, matching what the LUFA code does.
+* converted `CONSUMER2BLUEFRUIT()` and `CONSUMER2RN42()` macros to static inline functions ([#9055](https://github.com/qmk/qmk_firmware/pull/9055))
+* Additional cleanups for V-USB code ([#9310](https://github.com/qmk/qmk_firmware/pull/9310))
+  * Removing the UART stuff entirely, now that we have Console support. Also fixing up various other things; switching some `debug()` calls to `dprintf()`, moved `raw_hid_report` out of the way so that we can implement the shared endpoint stuff.
+* removed inclusion of `adafruit_ble.h` from `ssd1306.c` ([#9355](https://github.com/qmk/qmk_firmware/pull/9355))
+* `outputselect.c` is no longer compiled if Bluetooth is disabled ([#9356](https://github.com/qmk/qmk_firmware/pull/9356))
+* `analogRead()` deprecated in favor of `analogReadPin()` ([#9023](https://github.com/qmk/qmk_firmware/pull/9023))
+* forcibly disable NKRO on V-USB controllers ([#9054](https://github.com/qmk/qmk_firmware/pull/9054))
+* removed warning if running backlight on STM32F072 ([#10040](https://github.com/qmk/qmk_firmware/pull/10040))
+* removed unused CORTEX_VTOR_INIT rules.mk option ([#10053](https://github.com/qmk/qmk_firmware/pull/10053))
+* improved handling for enabling Link Time Optimization ([#9832](https://github.com/qmk/qmk_firmware/pull/9832))
+* streamline rules for supporting Kiibohd bootloader ([#10129](https://github.com/qmk/qmk_firmware/pull/10129))
+* Define `STM32_DMA_REQUIRED` when using DMA-based WS2812 driver on STM32 ([#10127](https://github.com/qmk/qmk_firmware/pull/10127))
+* fix DMA stream ID calculation in ws2812_pwm ([#10008](https://github.com/qmk/qmk_firmware/pull/10008))
+* remove support for Adafruit EZ Key Bluetooth controller ([#10103](https://github.com/qmk/qmk_firmware/pull/10103))
+
+
+## QMK Infrastructure and Internals :id=qmk-internals
+
+* Attempt to fix CI for non-master branches. ([#9308](https://github.com/qmk/qmk_firmware/pull/9308))
+  * Actually fetch the branch we're attempting to compare against.
+* Run `qmk cformat` on `develop` branch ([#9501](https://github.com/qmk/qmk_firmware/pull/9501))
+* minor refactor of Bluetooth API ([#9905](https://github.com/qmk/qmk_firmware/pull/9905))

docs/_summary.md

@@ -103,6 +103,7 @@
     * [DIP Switch](feature_dip_switch.md)
     * [Encoders](feature_encoders.md)
     * [Haptic Feedback](feature_haptic_feedback.md)
+    * [Joystick](feature_joystick.md)
     * [Proton C Conversion](proton_c_conversion.md)
     * [PS/2 Mouse](feature_ps2_mouse.md)
     * [Split Keyboard](feature_split_keyboard.md)

docs/adc_driver.md

@@ -45,9 +45,9 @@ Then place this include at the top of your code:
 
 Note that some of these pins are doubled-up on ADCs with the same channel. This is because the pins can be used for either ADC.
 
-Also note that the F0 and F3 use different numbering schemes. The F0 has a single ADC and the channels are 0-based, whereas the F3 has 4 ADCs and the channels are 1 based. This is because the F0 uses the `ADCv1` implementation of the ADC, whereas the F3 uses the `ADCv3` implementation.
+Also note that the F0 and F3 use different numbering schemes. The F0 has a single ADC and the channels are 0-indexed, whereas the F3 has 4 ADCs and the channels are 1-indexed. This is because the F0 uses the `ADCv1` implementation of the ADC, whereas the F3 uses the `ADCv3` implementation.
 
-|ADC|Channel|STM32F0XX|STM32F3XX|
+|ADC|Channel|STM32F0xx|STM32F3xx|
 |---|-------|---------|---------|
 |1  |0      |`A0`     |         |
 |1  |1      |`A1`     |`A0`     |
@@ -122,32 +122,29 @@ Also note that the F0 and F3 use different numbering schemes. The F0 has a singl
 |Function                    |Description                                                                                                        |
 |----------------------------|-------------------------------------------------------------------------------------------------------------------|
 |`analogReference(mode)`     |Sets the analog voltage reference source. Must be one of `ADC_REF_EXTERNAL`, `ADC_REF_POWER` or `ADC_REF_INTERNAL`.|
-|`analogRead(pin)`           |Reads the value from the specified Arduino pin, eg. `4` for ADC6 on the ATmega32U4.                                |
+|`analogReadPin(pin)`        |Reads the value from the specified pin, eg. `F6` for ADC6 on the ATmega32U4.                                       |
-|`analogReadPin(pin)`        |Reads the value from the specified QMK pin, eg. `F6` for ADC6 on the ATmega32U4.                                   |
+|`pinToMux(pin)`             |Translates a given pin to a mux value. If an unsupported pin is given, returns the mux value for "0V (GND)".       |
-|`pinToMux(pin)`             |Translates a given QMK pin to a mux value. If an unsupported pin is given, returns the mux value for "0V (GND)".   |
 |`adc_read(mux)`             |Reads the value from the ADC according to the specified mux. See your MCU's datasheet for more information.        |
 
 ### ARM
 
-Note that care was taken to match all of the functions used for AVR devices, however complications in the ARM platform prevent that from always being possible. For example, the `STM32` chips do not have assigned Arduino pins. We could use the default pin numbers, but those numbers change based on the package type of the device. For this reason, please specify your target pins with their identifiers (`A0`, `F3`, etc.). Also note that there are some variants of functions that accept the target ADC for the pin. Some pins can be used for multiple ADCs, and this specified can help you pick which ADC will be used to interact with that pin.
-
 |Function                    |Description                                                                                                                                                                                                                                                                                           |
-|----------------------------|--------------------------------------------------------------------------------------------------------------------|
+|----------------------------|------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
-|`analogReadPin(pin)`        |Reads the value from the specified QMK pin, eg. `A0` for channel 0 on the STM32F0 and ADC1 channel 1 on the STM32F3. Note that if a pin can be used for multiple ADCs, it will pick the lower numbered ADC for this function. eg. `C0` will be channel 6 of ADC 1 when it could be used for ADC 2 as well.|
+|`analogReadPin(pin)`        |Reads the value from the specified pin, eg. `A0` for channel 0 on the STM32F0 and ADC1 channel 1 on the STM32F3. Note that if a pin can be used for multiple ADCs, it will pick the lower numbered ADC for this function. eg. `C0` will be channel 6 of ADC 1 when it could be used for ADC 2 as well.|
-|`analogReadPinAdc(pin, adc)`|Reads the value from the specified QMK pin and ADC, eg. `C0, 1` will read from channel 6, ADC 2 instead of ADC 1. Note that the ADCs are 0-indexed for this function.|
+|`analogReadPinAdc(pin, adc)`|Reads the value from the specified pin and ADC, eg. `C0, 1` will read from channel 6, ADC 2 instead of ADC 1. Note that the ADCs are 0-indexed for this function.                                                                                                                                     |
-|`pinToMux(pin)`             |Translates a given QMK pin to a channel and ADC combination. If an unsupported pin is given, returns the mux value for "0V (GND)".|
+|`pinToMux(pin)`             |Translates a given pin to a channel and ADC combination. If an unsupported pin is given, returns the mux value for "0V (GND)".                                                                                                                                                                        |
-|`adc_read(mux)`             |Reads the value from the ADC according to the specified pin and adc combination. See your MCU's datasheet for more information.|
+|`adc_read(mux)`             |Reads the value from the ADC according to the specified pin and ADC combination. See your MCU's datasheet for more information.                                                                                                                                                                       |
 
 ## Configuration
 
 ## ARM
 
-The ARM implementation of the ADC has a few additional options that you can override in your own keyboards and keymaps to change how it operates.
+The ARM implementation of the ADC has a few additional options that you can override in your own keyboards and keymaps to change how it operates. Please consult the corresponding `hal_adc_lld.h` in ChibiOS for your specific microcontroller for further documentation on your available options.
 
 |`#define`            |Type  |Default              |Description                                                                                                                                                                                                 |
-|-------------------|------|---------------------|-----------|
+|---------------------|------|---------------------|------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
-|ADC_CIRCULAR_BUFFER|`bool`|`false`              |If `TRUE`, then the implementation will use a circular buffer.|
+|`ADC_CIRCULAR_BUFFER`|`bool`|`false`              |If `true`, then the implementation will use a circular buffer.                                                                                                                                              |
-|ADC_NUM_CHANNELS   |`int` |`1`                  |Sets the number of channels that will be scanned as part of an ADC operation. The current implementation only supports `1`.|
+|`ADC_NUM_CHANNELS`   |`int` |`1`                  |Sets the number of channels that will be scanned as part of an ADC operation. The current implementation only supports `1`.                                                                                 |
-|ADC_BUFFER_DEPTH   |`int` |`2`                  |Sets the depth of each result. Since we are only getting a 12-bit result by default, we set this to `2` bytes so we can contain our one value. This could be set to 1 if you opt for a 8-bit or lower result.|
+|`ADC_BUFFER_DEPTH`   |`int` |`2`                  |Sets the depth of each result. Since we are only getting a 12-bit result by default, we set this to 2 bytes so we can contain our one value. This could be set to 1 if you opt for an 8-bit or lower result.|
-|ADC_SAMPLING_RATE  |`int` |`ADC_SMPR_SMP_1P5`   |Sets the sampling rate of the ADC. By default, it is set to the fastest setting. Please consult the corresponding `hal_adc_lld.h` in ChibiOS for your specific microcontroller for further documentation on your available options.|
+|`ADC_SAMPLING_RATE`  |`int` |`ADC_SMPR_SMP_1P5`   |Sets the sampling rate of the ADC. By default, it is set to the fastest setting.                                                                                                                            |
-|ADC_RESOLUTION     |`int` |`ADC_CFGR1_RES_12BIT`|The resolution of your result. We choose 12 bit by default, but you can opt for 12, 10, 8, or 6 bit. Please consult the corresponding `hal_adc_lld.h` in ChibiOS for your specific microcontroller for further documentation on your available options.|
+|`ADC_RESOLUTION`     |`int` |`ADC_CFGR1_RES_12BIT`|The resolution of your result. We choose 12 bit by default, but you can opt for 12, 10, 8, or 6 bit.                                                                                                        |

docs/breaking_changes.md

@@ -6,22 +6,23 @@ The breaking change period is when we will merge PR's that change QMK in dangero
 
 ## What has been included in past Breaking Changes?
 
+* [2020 Aug 29](ChangeLog/20200829.md)
 * [2020 May 30](ChangeLog/20200530.md)
 * [2020 Feb 29](ChangeLog/20200229.md)
 * [2019 Aug 30](ChangeLog/20190830.md)
 
 ## When is the next Breaking Change?
 
-The next Breaking Change is scheduled for Aug 29, 2020.
+The next Breaking Change is scheduled for November 28, 2020.
 
 ### Important Dates
 
-* [x] 2020 May 30 - `develop` is created. It will be rebased weekly.
+* [x] 2020 Aug 29 - `develop` is created. It will be rebased weekly.
-* [ ] 2020 Aug 1 - `develop` closed to new PR's.
+* [ ] 2020 Oct 31 - `develop` closed to new PR's.
-* [ ] 2020 Aug 1 - Call for testers.
+* [ ] 2020 Oct 31 - Call for testers.
-* [ ] 2020 Aug 27 - `master` is locked, no PR's merged.
+* [ ] 2020 Nov 26 - `master` is locked, no PR's merged.
-* [ ] 2020 Aug 29 - Merge `develop` to `master`.
+* [ ] 2020 Nov 28 - Merge `develop` to `master`.
-* [ ] 2020 Aug 29 - `master` is unlocked. PR's can be merged again.
+* [ ] 2020 Nov 28 - `master` is unlocked. PR's can be merged again.
 
 ## What changes will be included?
 

docs/config_options.md

@@ -324,11 +324,9 @@ This is a [make](https://www.gnu.org/software/make/manual/make.html) file that i
     ```
 * `LAYOUTS`
   * A list of [layouts](feature_layouts.md) this keyboard supports.
-* `LINK_TIME_OPTIMIZATION_ENABLE`
+* `LTO_ENABLE`
   * Enables Link Time Optimization (LTO) when compiling the keyboard.  This makes the process take longer, but it can significantly reduce the compiled size (and since the firmware is small, the added time is not noticeable).
 However, this will automatically disable the legacy TMK Macros and Functions features, as these break when LTO is enabled.  It does this by automatically defining `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION`.  (Note: This does not affect QMK [Macros](feature_macros.md) and [Layers](feature_layers.md).)
-* `LTO_ENABLE`
-  * Has the same meaning as `LINK_TIME_OPTIMIZATION_ENABLE`.  You can use `LTO_ENABLE` instead of `LINK_TIME_OPTIMIZATION_ENABLE`.
 
 ## AVR MCU Options
 * `MCU = atmega32u4`
@@ -373,10 +371,8 @@ Use these to enable or disable building certain features. The more you have enab
   * MIDI controls
 * `UNICODE_ENABLE`
   * Unicode
-* `BLUETOOTH_ENABLE`
-  * Legacy option to Enable Bluetooth with the Adafruit EZ-Key HID. See BLUETOOTH
 * `BLUETOOTH`
-  * Current options are AdafruitEzKey, AdafruitBLE, RN42
+  * Current options are AdafruitBLE, RN42
 * `SPLIT_KEYBOARD`
   * Enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common
 * `CUSTOM_MATRIX`

docs/feature_auto_shift.md

@@ -139,7 +139,7 @@ completely normal and with no intention of shifted keys.
    `KC_ASRP`. The keyboard will type by itself the value of your
    `AUTO_SHIFT_TIMEOUT`.
 7. Update `AUTO_SHIFT_TIMEOUT` in your `config.h` with the value reported.
-8. Remove `AUTO_SHIFT_SETUP` from your `config.h`.
+8. Add `AUTO_SHIFT_NO_SETUP` to your `config.h`.
 9. Remove the key bindings `KC_ASDN`, `KC_ASUP` and `KC_ASRP`.
 10. Compile and upload your new firmware.
 

docs/feature_backlight.md

@@ -160,8 +160,6 @@ See the ST datasheet for your particular MCU to determine these values. Unless y
 
 Currently only hardware PWM is supported, not timer assisted, and does not provide automatic configuration.
 
-?> Backlight support for STM32F072 has had limited testing, so YMMV. If unsure, set `BACKLIGHT_ENABLE = no` in your `rules.mk`.
-
 ### Software PWM Driver :id=software-pwm-driver
 
 In this mode, PWM is "emulated" while running other keyboard tasks. It offers maximum hardware compatibility without extra platform configuration. The tradeoff is the backlight might jitter when the keyboard is busy. To enable, add this to your `rules.mk`:

docs/feature_bluetooth.md

@@ -2,11 +2,10 @@
 
 ## Bluetooth Known Supported Hardware
 
-Currently Bluetooth support is limited to AVR based chips. For Bluetooth 2.1, QMK has support for RN-42 modules and the Bluefruit EZ-Key, the latter of which is not produced anymore. For more recent BLE protocols, currently only the Adafruit Bluefruit SPI Friend is directly supported. BLE is needed to connect to iOS devices. Note iOS does not support mouse input.
+Currently Bluetooth support is limited to AVR based chips. For Bluetooth 2.1, QMK has support for RN-42 modules. For more recent BLE protocols, currently only the Adafruit Bluefruit SPI Friend is directly supported. BLE is needed to connect to iOS devices. Note iOS does not support mouse input.
 
 |Board                                                           |Bluetooth Protocol          |Connection Type |rules.mk                   |Bluetooth Chip|
 |----------------------------------------------------------------|----------------------------|----------------|---------------------------|--------------|
-|[Adafruit EZ-Key HID](https://www.adafruit.com/product/1535)   |Bluetooth Classic           | UART           |`BLUETOOTH = AdafruitEZKey` |              |
 |Roving Networks RN-42 (Sparkfun Bluesmirf)                       |Bluetooth Classic           | UART           |`BLUETOOTH = RN42`          | RN-42        |
 |[Bluefruit LE SPI Friend](https://www.adafruit.com/product/2633)|Bluetooth Low Energy        | SPI            |`BLUETOOTH = AdafruitBLE`   | nRF51822      |
 
@@ -24,16 +23,12 @@ Currently The only bluetooth chipset supported by QMK is the Adafruit Bluefruit
 
 A Bluefruit UART friend can be converted to an SPI friend, however this [requires](https://github.com/qmk/qmk_firmware/issues/2274) some reflashing and soldering directly to the MDBT40 chip.
 
-## Adafruit EZ-Key hid
-This requires [some hardware changes](https://www.reddit.com/r/MechanicalKeyboards/comments/3psx0q/the_planck_keyboard_with_bluetooth_guide_and/?ref=search_posts), but can be enabled via the Makefile. The firmware will still output characters via USB, so be aware of this when charging via a computer. It would make sense to have a switch on the Bluefruit to turn it off at will.
-
 
 <!-- FIXME: Document bluetooth support more completely. -->
 ## Bluetooth Rules.mk Options
 Use only one of these
 * BLUETOOTH_ENABLE = yes (Legacy Option)
 * BLUETOOTH = RN42
-* BLUETOOTH = AdafruitEZKey
 * BLUETOOTH = AdafruitBLE
 
 ## Bluetooth Keycodes

docs/feature_joystick.md

@@ -0,0 +1,147 @@
+## Joystick
+
+The keyboard can be made to be recognized as a joystick HID device by the operating system.
+
+This is enabled by adding `JOYSTICK_ENABLE` to `rules.mk`. You can set this value to `analog`, `digital`, or `no`.
+
+!> Joystick support is not currently available on V-USB devices.
+
+The joystick feature provides two services:
+ * reading analog input devices (eg. potentiometers)
+ * sending gamepad HID reports
+
+Both services can be used without the other, depending on whether you just want to read a device but not send gamepad reports (for volume control for instance)
+or send gamepad reports based on values computed by the keyboard.
+
+### Analog Input
+
+To use analog input you must first enable it in `rules.mk`:
+
+```makefile
+JOYSTICK_ENABLE = analog
+```
+
+An analog device such as a potentiometer found on a gamepad's analog axes is based on a [voltage divider](https://en.wikipedia.org/wiki/Voltage_divider).
+It is composed of three connectors linked to the ground, the power input and power output (usually the middle one). The power output holds the voltage that varies based on the position of the cursor,
+which value will be read using your MCU's [ADC](https://en.wikipedia.org/wiki/Analog-to-digital_converter).
+Depending on which pins are already used by your keyboard's matrix, the rest of the circuit can get a little bit more complicated,
+feeding the power input and ground connection through pins and using diodes to avoid bad interactions with the matrix scanning procedures.
+
+### Configuring the Joystick
+
+By default, two axes and eight buttons are defined. This can be changed in your `config.h`:
+
+```c
+// Max 32
+#define JOYSTICK_BUTTON_COUNT 16
+// Max 6: X, Y, Z, Rx, Ry, Rz
+#define JOYSTICK_AXES_COUNT 3
+```
+
+When defining axes for your joystick, you have to provide a definition array. You can do this from your keymap.c file.
+A joystick will either be read from an input pin that allows the use of the ADC, or can be virtual, so that its value is provided by your code.
+You have to define an array of type ''joystick_config_t'' and of proper size.
+
+There are three ways for your circuit to work with the ADC, that relies on the use of 1, 2 or 3 pins of the MCU:
+ * 1 pin: your analog device is directly connected to your device GND and VCC. The only pin used is the ADC pin of your choice.
+ * 2 pins: your analog device is powered through a pin that allows toggling it on or off. The other pin is used to read the input value through the ADC.
+ * 3 pins: both the power input and ground are connected to pins that must be set to a proper state before reading and restored afterwards.
+
+The configuration of each axis is performed using one of four macros:
+ * `JOYSTICK_AXIS_VIRTUAL`: no ADC reading must be performed, that value will be provided by keyboard/keymap-level code
+ * `JOYSTICK_AXIS_IN(INPUT_PIN, LOW, REST, HIGH)`: a voltage will be read on the provided pin, which must be an ADC-capable pin.
+ * `JOYSTICK_AXIS_IN_OUT(INPUT_PIN, OUTPUT_PIN, LOW, REST, HIGH)`: the provided `OUTPUT_PIN` will be set high before `INPUT_PIN` is read.
+ * `JOYSTICK_AXIS_IN_OUT_GROUND(INPUT_PIN, OUTPUT_PIN, GROUND_PIN, LOW, REST, HIGH)`: the `OUTPUT_PIN` will be set high and `GROUND_PIN` will be set low before reading from `INPUT_PIN`.
+
+In any case where an ADC reading takes place (when `INPUT_PIN` is provided), additional `LOW`, `REST` and `HIGH` parameters are used.
+These implement the calibration of the analog device by defining the range of read values that will be mapped to the lowest, resting position and highest possible value for the axis (-127 to 127).
+In practice, you have to provide the lowest/highest raw ADC reading, and the raw reading at resting position, when no deflection is applied. You can provide inverted `LOW` and `HIGH` to invert the axis.
+
+For instance, an axes configuration can be defined in the following way:
+
+```c
+//joystick config
+joystick_config_t joystick_axes[JOYSTICK_AXES_COUNT] = {
+    [0] = JOYSTICK_AXIS_IN_OUT_GROUND(A4, B0, A7, 900, 575, 285),
+    [1] = JOYSTICK_AXIS_VIRTUAL
+};
+```
+
+When the ADC reads 900 or higher, the returned axis value will be -127, whereas it will be 127 when the ADC reads 285 or lower. Zero is returned when 575 is read.
+
+In this example, the first axis will be read from the `A4` pin while `B0` is set high and `A7` is set low, using `analogReadPin()`, whereas the second axis will not be read.
+
+In order to give a value to the second axis, you can do so in any customizable entry point: as an action, in `process_record_user()` or in `matrix_scan_user()`, or even in `joystick_task()` which is called even when no key has been pressed.
+You assign a value by writing to `joystick_status.axes[axis_index]` a signed 8-bit value (ranging from -127 to 127). Then it is necessary to assign the flag `JS_UPDATED` to `joystick_status.status` in order for an updated HID report to be sent.
+
+The following example writes two axes based on keypad presses, with `KC_P5` as a precision modifier:
+
+```c
+#ifdef ANALOG_JOYSTICK_ENABLE
+static uint8_t precision_val = 70;
+static uint8_t axesFlags = 0;
+enum axes {
+    Precision = 1,
+    Axis1High = 2,
+    Axis1Low = 4,
+    Axis2High = 8,
+    Axis2Low = 16
+};
+#endif
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch(keycode) {
+#ifdef ANALOG_JOYSTICK_ENABLE
+        // virtual joystick
+#    if JOYSTICK_AXES_COUNT > 1
+        case KC_P8:
+            if (record->event.pressed) {
+                axesFlags |= Axis2Low;
+            } else {
+                axesFlags &= ~Axis2Low;
+            }
+            joystick_status.status |= JS_UPDATED;
+            break;
+        case KC_P2:
+            if (record->event.pressed) {
+                axesFlags |= Axis2High;
+            } else {
+                axesFlags &= ~Axis2High;
+            }
+            joystick_status.status |= JS_UPDATED;
+            break;
+#    endif
+        case KC_P4:
+            if (record->event.pressed) {
+                axesFlags |= Axis1Low;
+            } else {
+                axesFlags &= ~Axis1Low;
+            }
+            joystick_status.status |= JS_UPDATED;
+            break;
+        case KC_P6:
+            if (record->event.pressed) {
+                axesFlags |= Axis1High;
+            } else {
+                axesFlags &= ~Axis1High;
+            }
+            joystick_status.status |= JS_UPDATED;
+            break;
+        case KC_P5:
+            if (record->event.pressed) {
+                axesFlags |= Precision;
+            } else {
+                axesFlags &= ~Precision;
+            }
+            joystick_status.status |= JS_UPDATED;
+            break;
+#endif
+    }
+    return true;
+}
+```
+
+### Triggering Joystick Buttons
+
+Joystick buttons are normal Quantum keycodes, defined as `JS_BUTTON0` to `JS_BUTTON31`, depending on the number of buttons you have configured.
+To trigger a joystick button, just add the corresponding keycode to your keymap.

docs/feature_oled_driver.md

@@ -72,6 +72,43 @@ static void render_logo(void) {
 }
 ```
 
+## Buffer Read Example
+For some purposes, you may need to read the current state of the OLED display
+buffer. The `oled_read_raw` function can be used to safely read bytes from the
+buffer.
+
+In this example, calling `fade_display` in the `oled_task_user` function will
+slowly fade away whatever is on the screen by turning random pixels black over
+time.
+```c
+//Setup some mask which can be or'd with bytes to turn off pixels
+const uint8_t single_bit_masks[8] = {127, 191, 223, 239, 247, 251, 253, 254};
+
+static void fade_display(void) {
+    //Define the reader structure
+    oled_buffer_reader_t reader;
+    uint8_t buff_char;
+    if (random() % 30 == 0) {
+        srand(timer_read());
+        // Fetch a pointer for the buffer byte at index 0. The return structure
+        // will have the pointer and the number of bytes remaining from this
+        // index position if we want to perform a sequential read by
+        // incrementing the buffer pointer
+        reader = oled_read_raw(0);
+        //Loop over the remaining buffer and erase pixels as we go
+        for (uint16_t i = 0; i < reader.remaining_element_count; i++) {
+            //Get the actual byte in the buffer by dereferencing the pointer
+            buff_char = *reader.current_element;
+            if (buff_char != 0) {
+                oled_write_raw_byte(buff_char & single_bit_masks[rand() % 8], i);
+            }
+            //increment the pointer to fetch a new byte during the next loop
+            reader.current_element++;
+        }
+    }
+}
+```
+
 ## Other Examples
 
 In split keyboards, it is very common to have two OLED displays that each render different content and are oriented or flipped differently. You can do this by switching which content to render by using the return value from `is_keyboard_master()` or `is_keyboard_left()` found in `split_util.h`, e.g:
@@ -238,6 +275,10 @@ void oled_write_P(const char *data, bool invert);
 // Remapped to call 'void oled_write_ln(const char *data, bool invert);' on ARM
 void oled_write_ln_P(const char *data, bool invert);
 
+// Returns a pointer to the requested start index in the buffer plus remaining
+// buffer length as struct
+oled_buffer_reader_t oled_read_raw(uint16_t start_index);
+
 // Writes a string to the buffer at current cursor position
 void oled_write_raw(const char *data, uint16_t size);
 

docs/feature_rgb_matrix.md

@@ -422,8 +422,8 @@ Where `28` is an unused index from `eeconfig.h`.
 |`rgb_matrix_toggle_noeeprom()`              |Toggle effect range LEDs between on and off (not written to EEPROM) |
 |`rgb_matrix_enable()`                       |Turn effect range LEDs on, based on their previous state |
 |`rgb_matrix_enable_noeeprom()`              |Turn effect range LEDs on, based on their previous state (not written to EEPROM) |
-|`rgb_matrix_disable()`                      |Turn effect range LEDs off |
+|`rgb_matrix_disable()`                      |Turn effect range LEDs off, based on their previous state |
-|`rgb_matrix_disable_noeeprom()`             |Turn effect range LEDs off (not written to EEPROM) |
+|`rgb_matrix_disable_noeeprom()`             |Turn effect range LEDs off, based on their previous state (not written to EEPROM) |
 
 ### Change Effect Mode :id=change-effect-mode
 |Function                                    |Description  |
@@ -431,19 +431,31 @@ Where `28` is an unused index from `eeconfig.h`.
 |`rgb_matrix_mode(mode)`                     |Set the mode, if RGB animations are enabled |
 |`rgb_matrix_mode_noeeprom(mode)`            |Set the mode, if RGB animations are enabled (not written to EEPROM) |
 |`rgb_matrix_step()`                         |Change the mode to the next RGB animation in the list of enabled RGB animations |
+|`rgb_matrix_step_noeeprom()`                |Change the mode to the next RGB animation in the list of enabled RGB animations (not written to EEPROM) |
 |`rgb_matrix_step_reverse()`                 |Change the mode to the previous RGB animation in the list of enabled RGB animations |
-|`rgb_matrix_increase_speed()`               |Increases the speed of the animations |
+|`rgb_matrix_step_reverse_noeeprom()`        |Change the mode to the previous RGB animation in the list of enabled RGB animations (not written to EEPROM) |
-|`rgb_matrix_decrease_speed()`               |Decreases the speed of the animations |
+|`rgb_matrix_increase_speed()`               |Increase the speed of the animations |
+|`rgb_matrix_increase_speed_noeeprom()`      |Increase the speed of the animations (not written to EEPROM) |
+|`rgb_matrix_decrease_speed()`               |Decrease the speed of the animations |
+|`rgb_matrix_decrease_speed_noeeprom()`      |Decrease the speed of the animations (not written to EEPROM) |
+|`rgb_matrix_set_speed(speed)`               |Set the speed of the animations to the given value where `speed` is between 0 and 255 |
+|`rgb_matrix_set_speed_noeeprom(speed)`      |Set the speed of the animations to the given value where `speed` is between 0 and 255 (not written to EEPROM) |
 
 ### Change Color :id=change-color
 |Function                                    |Description  |
 |--------------------------------------------|-------------|
 |`rgb_matrix_increase_hue()`                 |Increase the hue for effect range LEDs. This wraps around at maximum hue |
+|`rgb_matrix_increase_hue_noeeprom()`        |Increase the hue for effect range LEDs. This wraps around at maximum hue (not written to EEPROM) |
 |`rgb_matrix_decrease_hue()`                 |Decrease the hue for effect range LEDs. This wraps around at minimum hue |
+|`rgb_matrix_decrease_hue_noeeprom()`        |Decrease the hue for effect range LEDs. This wraps around at minimum hue (not written to EEPROM) |
 |`rgb_matrix_increase_sat()`                 |Increase the saturation for effect range LEDs. This wraps around at maximum saturation |
+|`rgb_matrix_increase_sat_noeeprom()`        |Increase the saturation for effect range LEDs. This wraps around at maximum saturation (not written to EEPROM) |
 |`rgb_matrix_decrease_sat()`                 |Decrease the saturation for effect range LEDs. This wraps around at minimum saturation |
+|`rgb_matrix_decrease_sat_noeeprom()`        |Decrease the saturation for effect range LEDs. This wraps around at minimum saturation (not written to EEPROM) |
 |`rgb_matrix_increase_val()`                 |Increase the value for effect range LEDs. This wraps around at maximum value |
+|`rgb_matrix_increase_val_noeeprom()`        |Increase the value for effect range LEDs. This wraps around at maximum value (not written to EEPROM) |
 |`rgb_matrix_decrease_val()`                 |Decrease the value for effect range LEDs. This wraps around at minimum value |
+|`rgb_matrix_decrease_val_noeeprom()`        |Decrease the value for effect range LEDs. This wraps around at minimum value (not written to EEPROM) |
 |`rgb_matrix_sethsv(h, s, v)`                |Set LEDs to the given HSV value where `h`/`s`/`v` are between 0 and 255 |
 |`rgb_matrix_sethsv_noeeprom(h, s, v)`       |Set LEDs to the given HSV value where `h`/`s`/`v` are between 0 and 255 (not written to EEPROM) |
 

docs/feature_rgblight.md

@@ -127,10 +127,10 @@ Use these defines to add or remove animations from the firmware. When you are ru
 The following options are used to tweak the various animations:
 
 |Define                              |Default      |Description                                                                                    |
-|------------------------------------|-------------|-------------------------------------------------------------------------------------|
+|------------------------------------|-------------|-----------------------------------------------------------------------------------------------|
 |`RGBLIGHT_EFFECT_BREATHE_CENTER`    |*Not defined*|If defined, used to calculate the curve for the breathing animation. Valid values are 1.0 to 2.7 |
 |`RGBLIGHT_EFFECT_BREATHE_MAX`       |`255`        |The maximum brightness for the breathing mode. Valid values are 1 to 255                       |
-|`RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL`|`1000`       |How long to wait between light changes for the "Christmas" animation, in milliseconds|
+|`RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL`|`40`         |How long (in milliseconds) to wait between animation steps for the "Christmas" animation       |
 |`RGBLIGHT_EFFECT_CHRISTMAS_STEP`    |`2`          |The number of LEDs to group the red/green colors by for the "Christmas" animation              |
 |`RGBLIGHT_EFFECT_KNIGHT_LED_NUM`    |`RGBLED_NUM` |The number of LEDs to have the "Knight" animation travel                                       |
 |`RGBLIGHT_EFFECT_KNIGHT_LENGTH`     |`3`          |The number of LEDs to light up for the "Knight" animation                                      |
@@ -377,6 +377,17 @@ rgblight_sethsv(HSV_GREEN, 2); // led 2
 |`rgblight_sethsv(h, s, v)`                  |Set effect range LEDs to the given HSV value where `h`/`s`/`v` are between 0 and 255 |
 |`rgblight_sethsv_noeeprom(h, s, v)`         |Set effect range LEDs to the given HSV value where `h`/`s`/`v` are between 0 and 255 (not written to EEPROM) |
 
+#### Speed functions
+|Function                                    |Description  |
+|--------------------------------------------|-------------|
+|`rgblight_increase_speed()`                 |Increases the animation speed |
+|`rgblight_increase_speed_noeeprom()`        |Increases the animation speed (not written to EEPROM) |
+|`rgblight_decrease_speed()`                 |Decreases the animation speed |
+|`rgblight_decrease_speed_noeeprom()`        |Decreases the animation speed (not written to EEPROM) |
+|`rgblight_set_speed()`                      |Sets the speed. Value is between 0 and 255 |
+|`rgblight_set_speed_noeeprom()`             |Sets the speed. Value is between 0 and 255 (not written to EEPROM) |
+
+
 #### layer functions
 |Function                                    |Description  |
 |--------------------------------------------|-------------|

docs/feature_tap_dance.md

@@ -28,7 +28,9 @@ After this, you'll want to use the `tap_dance_actions` array to specify what act
 * `ACTION_TAP_DANCE_LAYER_TOGGLE(kc, layer)`: Sends the `kc` keycode when tapped once, or toggles the state of `layer`. (this functions like the `TG` layer keycode).
 * `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in the user keymap - with the final tap count of the tap dance action.
 * `ACTION_TAP_DANCE_FN_ADVANCED(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn)`: Calls the first specified function - defined in the user keymap - on every tap, the second function when the dance action finishes (like the previous option), and the last function when the tap dance action resets.
-* `ACTION_TAP_DANCE_FN_ADVANCED_TIME(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn, tap_specific_tapping_term)`: This functions identically to the `ACTION_TAP_DANCE_FN_ADVANCED` function, but uses a custom tapping term for it, instead of the predefined `TAPPING_TERM`.
+* ~~`ACTION_TAP_DANCE_FN_ADVANCED_TIME(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn, tap_specific_tapping_term)`~~: This functions identically to the `ACTION_TAP_DANCE_FN_ADVANCED` function, but uses a custom tapping term for it, instead of the predefined `TAPPING_TERM`.
+    * This is deprecated in favor of the Per Key Tapping Term functionality, as outlined [here](custom_quantum_functions.md#Custom_Tapping_Term). You'd want to check for the specific `TD()` macro that you want to use (such as `TD(TD_ESC_CAPS)`) instead of using this specific Tap Dance function.
+
 
 The first option is enough for a lot of cases, that just want dual roles. For example, `ACTION_TAP_DANCE_DOUBLE(KC_SPC, KC_ENT)` will result in `Space` being sent on single-tap, `Enter` otherwise. 
 

docs/flashing.md

@@ -239,3 +239,4 @@ There are a number of DFU commands that you can use to flash firmware to a STM32
 * `:dfu-util-split-left` - This flashes the normal firmware, just like the default option (`:dfu-util`). However, this also configures the "Left Side" EEPROM setting for split keyboards.
 * `:dfu-util-split-right` - This flashes the normal firmware, just like the default option (`:dfu-util`). However, this also configures the "Right Side" EEPROM setting for split keyboards.
 * `:st-link-cli` - This allows you to flash the firmware via ST-LINK's CLI utility, rather than dfu-util. 
+* `:st-flash` - This allows you to flash the firmware via the `st-flash` utility from [STLink Tools](https://github.com/stlink-org/stlink), rather than dfu-util.

docs/getting_started_make_guide.md

@@ -101,10 +101,6 @@ This allows you to send Unicode characters by inputting a mnemonic corresponding
 
 For further details, as well as limitations, see the [Unicode page](feature_unicode.md).
 
-`BLUETOOTH_ENABLE`
-
-This allows you to interface with a Bluefruit EZ-key to send keycodes wirelessly. It uses the D2 and D3 pins.
-
 `AUDIO_ENABLE`
 
 This allows you output audio on the C6 pin (needs abstracting). See the [audio page](feature_audio.md) for more information.

docs/ja/config_options.md

@@ -322,11 +322,9 @@ QMK での全ての利用可能な設定にはデフォルトがあります。
     ```
 * `LAYOUTS`
   * このキーボードがサポートする[レイアウト](ja/feature_layouts.md)のリスト
-* `LINK_TIME_OPTIMIZATION_ENABLE`
+* `LTO_ENABLE`
   * キーボードをコンパイルする時に、Link Time Optimization (LTO) を有効にします。これは処理に時間が掛かりますが、コンパイルされたサイズを大幅に減らします (そして、ファームウェアが小さいため、追加の時間は分からないくらいです)。
 ただし、LTO が有効な場合、古い TMK のマクロと関数の機能が壊れるため、自動的にこれらの機能を無効にします。これは `NO_ACTION_MACRO` と `NO_ACTION_FUNCTION` を自動的に定義することで行われます。(メモ: これは QMK の [マクロ](ja/feature_macros.md) と [レイヤー](ja/feature_layers.md) には影響を与えません。)
-* `LTO_ENABLE`
-  * LINK_TIME_OPTIMIZATION_ENABLE と同じ意味です。`LINK_TIME_OPTIMIZATION_ENABLE` の代わりに `LTO_ENABLE` を使うことができます。
 
 ## AVR MCU オプション
 * `MCU = atmega32u4`
@@ -371,10 +369,8 @@ QMK での全ての利用可能な設定にはデフォルトがあります。
   * MIDI 制御
 * `UNICODE_ENABLE`
   * Unicode
-* `BLUETOOTH_ENABLE`
-  * Adafruit EZ-Key HID で Bluetooth を有効にするレガシーオプション。BLUETOOTH を見てください
 * `BLUETOOTH`
-  * 現在のオプションは、AdafruitEzKey、AdafruitBLE、RN42
+  * 現在のオプションは、AdafruitBLE、RN42
 * `SPLIT_KEYBOARD`
   * 分割キーボード (let's split や bakingpy のキーボードのようなデュアル MCU) のサポートを有効にし、quantum/split_common にある全ての必要なファイルをインクルードします
 * `CUSTOM_MATRIX`

docs/ja/feature_bluetooth.md

@@ -7,11 +7,10 @@
 
 ## Bluetooth の既知のサポートハードウェア
 
-現在のところ Bluetooth のサポートは AVR ベースのチップに限られます。Bluetooth 2.1 については、QMK は RN-42 モジュールと、Bluefruit EZ-Key をサポートしますが、後者はもう生産されていません。より最近の BLE プロトコルについては、現在のところ Adafruit Bluefruit SPI Friend のみが直接サポートされています。iOS デバイスに接続するには、BLE が必要です。iOS はマウス入力をサポートしないことに注意してください。
+現在のところ Bluetooth のサポートは AVR ベースのチップに限られます。Bluetooth 2.1 については、QMK は RN-42 モジュールをサポートします。より最近の BLE プロトコルについては、現在のところ Adafruit Bluefruit SPI Friend のみが直接サポートされています。iOS デバイスに接続するには、BLE が必要です。iOS はマウス入力をサポートしないことに注意してください。
 
 | ボード | Bluetooth プロトコル | 接続タイプ | rules.mk | Bluetooth チップ |
 |----------------------------------------------------------------|----------------------------|----------------|---------------------------|--------------|
-| [Adafruit EZ-Key HID](https://www.adafruit.com/product/1535) | Bluetooth Classic | UART | `BLUETOOTH = AdafruitEZKey` |  |
 | Roving Networks RN-42 (Sparkfun Bluesmirf) | Bluetooth Classic | UART | `BLUETOOTH = RN42` | RN-42 |
 | [Bluefruit LE SPI Friend](https://www.adafruit.com/product/2633) | Bluetooth Low Energy | SPI | `BLUETOOTH = AdafruitBLE` | nRF51822 |
 
@@ -29,16 +28,11 @@
 
 Bluefruit UART friend は SPI friend に変換することができますが、これにはMDBT40 チップへの直接の再書き込みとはんだ付けが[必要です](https://github.com/qmk/qmk_firmware/issues/2274)。
 
-## Adafruit EZ-Key hid
-これには[ハードウェアの変更](https://www.reddit.com/r/MechanicalKeyboards/comments/3psx0q/the_planck_keyboard_with_bluetooth_guide_and/?ref=search_posts)が必要ですが、Makefile を使って有効にすることができます。ファームウェアは引き続き USB 経由で文字を出力するため、コンピュータ経由で充電する場合は注意してください。任意にオフにするために Bluefruit 上にスイッチを持つことは理にかなっています。
-
-
 <!-- FIXME: Document bluetooth support more completely. -->
 ## Bluetooth の Rules.mk オプション
 これらのうちの1つだけを使ってください
 * BLUETOOTH_ENABLE = yes (レガシーオプション)
 * BLUETOOTH = RN42
-* BLUETOOTH = AdafruitEZKey
 * BLUETOOTH = AdafruitBLE
 
 ## Bluetooth キーコード

docs/ja/getting_started_make_guide.md

@@ -106,10 +106,6 @@ make コマンド自体にもいくつかの追加オプションがあります
 
 詳細と制限については、[Unicode ページ](ja/feature_unicode.md) を見てください。
 
-`BLUETOOTH_ENABLE`
-
-これによりキーコードをワイヤレスで送信するために Bluefruit EZ-key と連動することができます。D2 と D3 ピンを使います。
-
 `AUDIO_ENABLE`
 
 C6 ピン(抽象化が必要)でオーディオ出力できます。詳細は[オーディオページ](ja/feature_audio.md)を見てください。

docs/platformdev_chibios_earlyinit.md

@@ -4,17 +4,28 @@ This page describes a part of QMK that is a somewhat advanced concept, and is on
 
 QMK uses ChibiOS as the underlying layer to support a multitude of Arm-based devices. Each ChibiOS-supported keyboard has a low-level board definition which is responsible for initializing hardware peripherals such as the clocks, and GPIOs.
 
-Older QMK revisions required duplication of these board definitions inside your keyboard's directory in order to override such early initialization points; this is now abstracted into the following APIs, and allows usage of the board definitions supplied with ChibiOS itself. Check `<qmk_firmware>/lib/chibios/os/hal/boards` for the list of official definitions. If your keyboard needs extra initialization at a very early stage, consider providing keyboard-level overrides of the following APIs:
+Older QMK revisions required duplication of these board definitions inside your keyboard's directory in order to override such early initialization points; this is now abstracted into the following APIs, and allows usage of the board definitions supplied with ChibiOS itself. Check `<qmk_firmware>/lib/chibios/os/hal/boards` for the list of official definitions. If your keyboard needs extra initialization at a very early stage, consider providing keyboard-level overrides of the following APIs instead of duplicating the board definitions:
 
 ## `early_hardware_init_pre()` :id=early-hardware-init-pre
 
 The function `early_hardware_init_pre` is the earliest possible code that can be executed by a keyboard firmware. This is intended as a replacement for the ChibiOS board definition's `__early_init` function, and is the equivalent of executing at the start of the function.
 
-This is executed before RAM gets cleared, and before clocks or GPIOs are configured; any delays or preparation using GPIOs is not likely to work at this point. After executing this function, RAM on the MCU may be zero'ed. Assigning values to variables during execution of this function may be overwritten.
+This is executed before RAM gets cleared, and before clocks or GPIOs are configured; for example, ChibiOS delays are not likely to work at this point. After executing this function, RAM on the MCU may be zero'ed. Assigning values to variables during execution of this function may be overwritten.
 
-As such, if you wish to override this API consider limiting use to writing to low-level registers. The default implementation of this function can be configured to jump to bootloader if a `RESET` key was pressed, by ensuring `#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE` is in the keyboard's `config.h` file.
+As such, if you wish to override this API consider limiting use to writing to low-level registers. The default implementation of this function can be configured to jump to bootloader if a `RESET` key was pressed:
 
-To implement your own version of this function, in your keyboard's source files:
+| `config.h` override                           | Description                                                                                                                                                                                                                                                                            | Default  |
+|-----------------------------------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|----------|
+| `#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP`  | Whether or not bootloader is to be executed during the early initialisation code of QMK.                                                                                                                                                                                               | `FALSE`  |
+| `#define STM32_BOOTLOADER_ADDRESS`            | Relevant for single-bank STM32 MCUs, signifies the memory address to jump to bootloader. Consult [AN2606](https://www.st.com/content/st_com/en/search.html#q=an2606-t=resources-page=1) for the _System Memory_ address for your MCU. This value should be of the format `0x11111111`. | `<none>` |
+| `#define STM32_BOOTLOADER_DUAL_BANK`          | Relevant for dual-bank STM32 MCUs, signifies that a GPIO is to be toggled in order to enter bootloader mode.                                                                                                                                                                           | `FALSE`  |
+| `#define STM32_BOOTLOADER_DUAL_BANK_GPIO`     | Relevant for dual-bank STM32 MCUs, the pin to toggle when attempting to enter bootloader mode, e.g. `B8`                                                                                                                                                                               | `<none>` |
+| `#define STM32_BOOTLOADER_DUAL_BANK_POLARITY` | Relevant for dual-bank STM32 MCUs, the value to set the pin to in order to trigger charging of the RC circuit. e.g. `0` or `1`.                                                                                                                                                        | `0`      |
+| `#define STM32_BOOTLOADER_DUAL_BANK_DELAY`    | Relevant for dual-bank STM32 MCUs, an arbitrary measurement of time to delay before resetting the MCU. Increasing number increases the delay.                                                                                                                                          | `100000` |
+
+Kinetis MCUs have no configurable options.
+
+Alternatively, to implement your own version of this function, in your keyboard's source files:
 
 ```c
 void early_hardware_init_pre(void) {

docs/ws2812_driver.md

@@ -92,6 +92,7 @@ Configure the hardware via your config.h:
 #define WS2812_PWM_PAL_MODE 2  // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
 #define WS2812_DMA_STREAM STM32_DMA1_STREAM2  // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
 #define WS2812_DMA_CHANNEL 2  // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
+#define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM2_UP // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU.
 ```
 
 You must also turn on the PWM feature in your halconf.h and mcuconf.h

doxygen-todo

@@ -1,6 +1,5 @@
 tmk_core/protocol
 tmk_core/protocol/chibios
-tmk_core/protocol/iwrap
 tmk_core/protocol/lufa
 tmk_core/protocol/midi
 tmk_core/protocol/midi/bytequeue

drivers/avr/analog.c

@@ -97,10 +97,11 @@ uint8_t pinToMux(pin_t pin) {
 #endif
             // clang-format on
     }
+    return 0;
 }
 
 int16_t adc_read(uint8_t mux) {
-    uint8_t low;
+    uint16_t low;
 
     // Enable ADC and configure prescaler
     ADCSRA = _BV(ADEN) | ADC_PRESCALER;
@@ -128,5 +129,10 @@ int16_t adc_read(uint8_t mux) {
     // Must read LSB first
     low = ADCL;
     // Must read MSB only once!
-    return (ADCH << 8) | low;
+    low |= (ADCH << 8);
+
+    // turn off the ADC
+    ADCSRA &= ~(1 << ADEN);
+
+    return low;
 }

drivers/avr/ssd1306.c

@@ -5,9 +5,6 @@
 #    include <string.h>
 #    include "print.h"
 #    include "glcdfont.c"
-#    ifdef ADAFRUIT_BLE_ENABLE
-#        include "adafruit_ble.h"
-#    endif
 #    ifdef PROTOCOL_LUFA
 #        include "lufa.h"
 #    endif

drivers/boards/BLACKPILL_STM32_F401/board.c

@@ -1,250 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * This file has been automatically generated using ChibiStudio board
- * generator plugin. Do not edit manually.
- */
-
-#include "hal.h"
-#include "stm32_gpio.h"
-
-/*===========================================================================*/
-/* Driver local definitions.                                                 */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported variables.                                                */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local variables and types.                                         */
-/*===========================================================================*/
-
-/**
- * @brief   Type of STM32 GPIO port setup.
- */
-typedef struct {
-    uint32_t moder;
-    uint32_t otyper;
-    uint32_t ospeedr;
-    uint32_t pupdr;
-    uint32_t odr;
-    uint32_t afrl;
-    uint32_t afrh;
-} gpio_setup_t;
-
-/**
- * @brief   Type of STM32 GPIO initialization data.
- */
-typedef struct {
-#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
-    gpio_setup_t PAData;
-#endif
-#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
-    gpio_setup_t PBData;
-#endif
-#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
-    gpio_setup_t PCData;
-#endif
-#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
-    gpio_setup_t PDData;
-#endif
-#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
-    gpio_setup_t PEData;
-#endif
-#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
-    gpio_setup_t PFData;
-#endif
-#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
-    gpio_setup_t PGData;
-#endif
-#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
-    gpio_setup_t PHData;
-#endif
-#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
-    gpio_setup_t PIData;
-#endif
-#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)
-    gpio_setup_t PJData;
-#endif
-#if STM32_HAS_GPIOK || defined(__DOXYGEN__)
-    gpio_setup_t PKData;
-#endif
-} gpio_config_t;
-
-/**
- * @brief   STM32 GPIO static initialization data.
- */
-static const gpio_config_t gpio_default_config = {
-#if STM32_HAS_GPIOA
-    {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
-#endif
-#if STM32_HAS_GPIOB
-    {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
-#endif
-#if STM32_HAS_GPIOC
-    {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
-#endif
-#if STM32_HAS_GPIOD
-    {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
-#endif
-#if STM32_HAS_GPIOE
-    {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
-#endif
-#if STM32_HAS_GPIOF
-    {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
-#endif
-#if STM32_HAS_GPIOG
-    {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
-#endif
-#if STM32_HAS_GPIOH
-    {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
-#endif
-#if STM32_HAS_GPIOI
-    {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH},
-#endif
-#if STM32_HAS_GPIOJ
-    {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH},
-#endif
-#if STM32_HAS_GPIOK
-    {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH}
-#endif
-};
-
-/*===========================================================================*/
-/* Driver local functions.                                                   */
-/*===========================================================================*/
-
-static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) {
-    gpiop->OTYPER  = config->otyper;
-    gpiop->OSPEEDR = config->ospeedr;
-    gpiop->PUPDR   = config->pupdr;
-    gpiop->ODR     = config->odr;
-    gpiop->AFRL    = config->afrl;
-    gpiop->AFRH    = config->afrh;
-    gpiop->MODER   = config->moder;
-}
-
-static void stm32_gpio_init(void) {
-    /* Enabling GPIO-related clocks, the mask comes from the
-       registry header file.*/
-    rccResetAHB1(STM32_GPIO_EN_MASK);
-    rccEnableAHB1(STM32_GPIO_EN_MASK, true);
-
-    /* Initializing all the defined GPIO ports.*/
-#if STM32_HAS_GPIOA
-    gpio_init(GPIOA, &gpio_default_config.PAData);
-#endif
-#if STM32_HAS_GPIOB
-    gpio_init(GPIOB, &gpio_default_config.PBData);
-#endif
-#if STM32_HAS_GPIOC
-    gpio_init(GPIOC, &gpio_default_config.PCData);
-#endif
-#if STM32_HAS_GPIOD
-    gpio_init(GPIOD, &gpio_default_config.PDData);
-#endif
-#if STM32_HAS_GPIOE
-    gpio_init(GPIOE, &gpio_default_config.PEData);
-#endif
-#if STM32_HAS_GPIOF
-    gpio_init(GPIOF, &gpio_default_config.PFData);
-#endif
-#if STM32_HAS_GPIOG
-    gpio_init(GPIOG, &gpio_default_config.PGData);
-#endif
-#if STM32_HAS_GPIOH
-    gpio_init(GPIOH, &gpio_default_config.PHData);
-#endif
-#if STM32_HAS_GPIOI
-    gpio_init(GPIOI, &gpio_default_config.PIData);
-#endif
-#if STM32_HAS_GPIOJ
-    gpio_init(GPIOJ, &gpio_default_config.PJData);
-#endif
-#if STM32_HAS_GPIOK
-    gpio_init(GPIOK, &gpio_default_config.PKData);
-#endif
-}
-
-/*===========================================================================*/
-/* Driver interrupt handlers.                                                */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported functions.                                                */
-/*===========================================================================*/
-
-__attribute__((weak)) void enter_bootloader_mode_if_requested(void) {}
-
-/**
- * @brief   Early initialization code.
- * @details GPIO ports and system clocks are initialized before everything
- *          else.
- */
-void __early_init(void) {
-    enter_bootloader_mode_if_requested();
-
-    stm32_gpio_init();
-    stm32_clock_init();
-}
-
-#if HAL_USE_SDC || defined(__DOXYGEN__)
-/**
- * @brief   SDC card detection.
- */
-bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
-    (void)sdcp;
-    /* TODO: Fill the implementation.*/
-    return true;
-}
-
-/**
- * @brief   SDC card write protection detection.
- */
-bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
-    (void)sdcp;
-    /* TODO: Fill the implementation.*/
-    return false;
-}
-#endif /* HAL_USE_SDC */
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief   MMC_SPI card detection.
- */
-bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-    (void)mmcp;
-    /* TODO: Fill the implementation.*/
-    return true;
-}
-
-/**
- * @brief   MMC_SPI card write protection detection.
- */
-bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
-    (void)mmcp;
-    /* TODO: Fill the implementation.*/
-    return false;
-}
-#endif
-
-/**
- * @brief   Board-specific initialization code.
- * @todo    Add your board-specific code, if any.
- */
-void boardInit(void) {}

drivers/boards/BLACKPILL_STM32_F401/board.h

@@ -1,568 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * This file has been automatically generated using ChibiStudio board
- * generator plugin. Do not edit manually.
- */
-
-#ifndef BOARD_H
-#define BOARD_H
-
-/*===========================================================================*/
-/* Driver constants.                                                         */
-/*===========================================================================*/
-
-/*
- * Setup for STM32F401CCU6 black pill board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_BLACKPILL_STM32_F401
-#define BOARD_NAME "STM32F401CCU6 blackpill"
-
-/*
- * Allow Board to boot USB without extra A9 hardware/software config
- */
-#define BOARD_OTG_NOVBUSSENS 1
-
-/*
- * Board oscillators-related settings.
- */
-#if !defined(STM32_LSECLK)
-#    define STM32_LSECLK 32768U
-#endif
-
-#if !defined(STM32_HSECLK)
-#    define STM32_HSECLK 25000000U
-#endif
-
-/*
- * Board voltages.
- * Required for performance limits calculation.
- */
-#define STM32_VDD 300U
-
-/*
- * MCU type as defined in the ST header.
- */
-#define STM32F401xC
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_BUTTON 0U
-#define GPIOA_PIN1 1U
-#define GPIOA_PIN2 2U
-#define GPIOA_PIN3 3U
-#define GPIOA_CS43L22_LRCK 4U
-#define GPIOA_L3GD20_SCL 5U
-#define GPIOA_L3GD20_SD0 6U
-#define GPIOA_L3GD20_SDI 7U
-#define GPIOA_PIN8 8U
-#define GPIOA_VBUS_FS 9U
-#define GPIOA_OTG_FS_ID 10U
-#define GPIOA_OTG_FS_DM 11U
-#define GPIOA_OTG_FS_DP 12U
-#define GPIOA_SWDIO 13U
-#define GPIOA_SWCLK 14U
-#define GPIOA_PIN15 15U
-
-#define GPIOB_PIN0 0U
-#define GPIOB_PIN1 1U
-#define GPIOB_PIN2 2U
-#define GPIOB_SWO 3U
-#define GPIOB_PIN4 4U
-#define GPIOB_PIN5 5U
-#define GPIOB_LSM303DLHC_SCL 6U
-#define GPIOB_PIN7 7U
-#define GPIOB_PIN8 8U
-#define GPIOB_LSM303DLHC_SDA 9U
-#define GPIOB_MP45DT02_CLK_IN 10U
-#define GPIOB_PIN11 11U
-#define GPIOB_PIN12 12U
-#define GPIOB_PIN13 13U
-#define GPIOB_PIN14 14U
-#define GPIOB_PIN15 15U
-
-#define GPIOC_OTG_FS_POWER_ON 0U
-#define GPIOC_PIN1 1U
-#define GPIOC_PIN2 2U
-#define GPIOC_CS43L22_AIN4x 3U
-#define GPIOC_MP45DT02_PDM_OUT 3U
-#define GPIOC_PIN4 4U
-#define GPIOC_PIN5 5U
-#define GPIOC_PIN6 6U
-#define GPIOC_CS43L22_MCLK 7U
-#define GPIOC_PIN8 8U
-#define GPIOC_PIN9 9U
-#define GPIOC_CS43L22_SCLK 10U
-#define GPIOC_PIN11 11U
-#define GPIOC_CS43L22_SDIN 12U
-#define GPIOC_PIN13 13U
-#define GPIOC_OSC32_IN 14U
-#define GPIOC_OSC32_OUT 15U
-
-#define GPIOD_PIN0 0U
-#define GPIOD_PIN1 1U
-#define GPIOD_PIN2 2U
-#define GPIOD_PIN3 3U
-#define GPIOD_CS43L22_RESET 4U
-#define GPIOD_OverCurrent 5U
-#define GPIOD_PIN6 6U
-#define GPIOD_PIN7 7U
-#define GPIOD_PIN8 8U
-#define GPIOD_PIN9 9U
-#define GPIOD_PIN10 10U
-#define GPIOD_PIN11 11U
-#define GPIOD_LED4 12U
-#define GPIOD_LED3 13U
-#define GPIOD_LED5 14U
-#define GPIOD_LED6 15U
-
-#define GPIOE_L3GD20_INT1 0U
-#define GPIOE_L3GD20_INT2 1U
-#define GPIOE_LSM303DLHC_DRDY 2U
-#define GPIOE_L3GD20_CS 3U
-#define GPIOE_LSM303DLHC_INT1 4U
-#define GPIOE_LSM303DLHC_INT2 5U
-#define GPIOE_PIN6 6U
-#define GPIOE_PIN7 7U
-#define GPIOE_PIN8 8U
-#define GPIOE_PIN9 9U
-#define GPIOE_PIN10 10U
-#define GPIOE_PIN11 11U
-#define GPIOE_PIN12 12U
-#define GPIOE_PIN13 13U
-#define GPIOE_PIN14 14U
-#define GPIOE_PIN15 15U
-
-#define GPIOF_PIN0 0U
-#define GPIOF_PIN1 1U
-#define GPIOF_PIN2 2U
-#define GPIOF_PIN3 3U
-#define GPIOF_PIN4 4U
-#define GPIOF_PIN5 5U
-#define GPIOF_PIN6 6U
-#define GPIOF_PIN7 7U
-#define GPIOF_PIN8 8U
-#define GPIOF_PIN9 9U
-#define GPIOF_PIN10 10U
-#define GPIOF_PIN11 11U
-#define GPIOF_PIN12 12U
-#define GPIOF_PIN13 13U
-#define GPIOF_PIN14 14U
-#define GPIOF_PIN15 15U
-
-#define GPIOG_PIN0 0U
-#define GPIOG_PIN1 1U
-#define GPIOG_PIN2 2U
-#define GPIOG_PIN3 3U
-#define GPIOG_PIN4 4U
-#define GPIOG_PIN5 5U
-#define GPIOG_PIN6 6U
-#define GPIOG_PIN7 7U
-#define GPIOG_PIN8 8U
-#define GPIOG_PIN9 9U
-#define GPIOG_PIN10 10U
-#define GPIOG_PIN11 11U
-#define GPIOG_PIN12 12U
-#define GPIOG_PIN13 13U
-#define GPIOG_PIN14 14U
-#define GPIOG_PIN15 15U
-
-#define GPIOH_OSC_IN 0U
-#define GPIOH_OSC_OUT 1U
-#define GPIOH_PIN2 2U
-#define GPIOH_PIN3 3U
-#define GPIOH_PIN4 4U
-#define GPIOH_PIN5 5U
-#define GPIOH_PIN6 6U
-#define GPIOH_PIN7 7U
-#define GPIOH_PIN8 8U
-#define GPIOH_PIN9 9U
-#define GPIOH_PIN10 10U
-#define GPIOH_PIN11 11U
-#define GPIOH_PIN12 12U
-#define GPIOH_PIN13 13U
-#define GPIOH_PIN14 14U
-#define GPIOH_PIN15 15U
-
-#define GPIOI_PIN0 0U
-#define GPIOI_PIN1 1U
-#define GPIOI_PIN2 2U
-#define GPIOI_PIN3 3U
-#define GPIOI_PIN4 4U
-#define GPIOI_PIN5 5U
-#define GPIOI_PIN6 6U
-#define GPIOI_PIN7 7U
-#define GPIOI_PIN8 8U
-#define GPIOI_PIN9 9U
-#define GPIOI_PIN10 10U
-#define GPIOI_PIN11 11U
-#define GPIOI_PIN12 12U
-#define GPIOI_PIN13 13U
-#define GPIOI_PIN14 14U
-#define GPIOI_PIN15 15U
-
-/*
- * IO lines assignments.
- */
-#define LINE_BUTTON PAL_LINE(GPIOA, 0U)
-#define LINE_CS43L22_LRCK PAL_LINE(GPIOA, 4U)
-#define LINE_L3GD20_SCL PAL_LINE(GPIOA, 5U)
-#define LINE_L3GD20_SD0 PAL_LINE(GPIOA, 6U)
-#define LINE_L3GD20_SDI PAL_LINE(GPIOA, 7U)
-#define LINE_VBUS_FS PAL_LINE(GPIOA, 9U)
-#define LINE_OTG_FS_ID PAL_LINE(GPIOA, 10U)
-#define LINE_OTG_FS_DM PAL_LINE(GPIOA, 11U)
-#define LINE_OTG_FS_DP PAL_LINE(GPIOA, 12U)
-#define LINE_SWDIO PAL_LINE(GPIOA, 13U)
-#define LINE_SWCLK PAL_LINE(GPIOA, 14U)
-#define LINE_SWO PAL_LINE(GPIOB, 3U)
-#define LINE_LSM303DLHC_SCL PAL_LINE(GPIOB, 6U)
-#define LINE_LSM303DLHC_SDA PAL_LINE(GPIOB, 9U)
-#define LINE_MP45DT02_CLK_IN PAL_LINE(GPIOB, 10U)
-#define LINE_OTG_FS_POWER_ON PAL_LINE(GPIOC, 0U)
-#define LINE_CS43L22_AIN4x PAL_LINE(GPIOC, 3U)
-#define LINE_MP45DT02_PDM_OUT PAL_LINE(GPIOC, 3U)
-#define LINE_CS43L22_MCLK PAL_LINE(GPIOC, 7U)
-#define LINE_CS43L22_SCLK PAL_LINE(GPIOC, 10U)
-#define LINE_CS43L22_SDIN PAL_LINE(GPIOC, 12U)
-#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U)
-#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U)
-#define LINE_CS43L22_RESET PAL_LINE(GPIOD, 4U)
-#define LINE_OverCurrent PAL_LINE(GPIOD, 5U)
-#define LINE_LED4 PAL_LINE(GPIOD, 12U)
-#define LINE_LED3 PAL_LINE(GPIOD, 13U)
-#define LINE_LED5 PAL_LINE(GPIOD, 14U)
-#define LINE_LED6 PAL_LINE(GPIOD, 15U)
-#define LINE_L3GD20_INT1 PAL_LINE(GPIOE, 0U)
-#define LINE_L3GD20_INT2 PAL_LINE(GPIOE, 1U)
-#define LINE_LSM303DLHC_DRDY PAL_LINE(GPIOE, 2U)
-#define LINE_L3GD20_CS PAL_LINE(GPIOE, 3U)
-#define LINE_LSM303DLHC_INT1 PAL_LINE(GPIOE, 4U)
-#define LINE_LSM303DLHC_INT2 PAL_LINE(GPIOE, 5U)
-#define LINE_OSC_IN PAL_LINE(GPIOH, 0U)
-#define LINE_OSC_OUT PAL_LINE(GPIOH, 1U)
-
-/*===========================================================================*/
-/* Driver pre-compile time settings.                                         */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Derived constants and error checks.                                       */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver data structures and types.                                         */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver macros.                                                            */
-/*===========================================================================*/
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the STM32 Reference Manual for details.
- */
-#define PIN_MODE_INPUT(n) (0U << ((n)*2U))
-#define PIN_MODE_OUTPUT(n) (1U << ((n)*2U))
-#define PIN_MODE_ALTERNATE(n) (2U << ((n)*2U))
-#define PIN_MODE_ANALOG(n) (3U << ((n)*2U))
-#define PIN_ODR_LOW(n) (0U << (n))
-#define PIN_ODR_HIGH(n) (1U << (n))
-#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
-#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
-#define PIN_OSPEED_VERYLOW(n) (0U << ((n)*2U))
-#define PIN_OSPEED_LOW(n) (1U << ((n)*2U))
-#define PIN_OSPEED_MEDIUM(n) (2U << ((n)*2U))
-#define PIN_OSPEED_HIGH(n) (3U << ((n)*2U))
-#define PIN_PUPDR_FLOATING(n) (0U << ((n)*2U))
-#define PIN_PUPDR_PULLUP(n) (1U << ((n)*2U))
-#define PIN_PUPDR_PULLDOWN(n) (2U << ((n)*2U))
-#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U))
-
-/*
- * GPIOA setup:
- *
- * PA0  - BUTTON                    (input floating).
- * PA1  - PIN1                      (input pullup).
- * PA2  - PIN2                      (input pullup).
- * PA3  - PIN3                      (input pullup).
- * PA4  - CS43L22_LRCK              (alternate 6).
- * PA5  - L3GD20_SCL                (alternate 5).
- * PA6  - L3GD20_SD0                (alternate 5).
- * PA7  - L3GD20_SDI                (alternate 5).
- * PA8  - PIN8                      (input pullup).
- * PA9  - VBUS_FS                   (input floating).
- * PA10 - OTG_FS_ID                 (alternate 10).
- * PA11 - OTG_FS_DM                 (alternate 10).
- * PA12 - OTG_FS_DP                 (alternate 10).
- * PA13 - SWDIO                     (alternate 0).
- * PA14 - SWCLK                     (alternate 0).
- * PA15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | PIN_MODE_INPUT(GPIOA_PIN1) | PIN_MODE_INPUT(GPIOA_PIN2) | PIN_MODE_INPUT(GPIOA_PIN3) | PIN_MODE_ALTERNATE(GPIOA_CS43L22_LRCK) | PIN_MODE_ALTERNATE(GPIOA_L3GD20_SCL) | PIN_MODE_ALTERNATE(GPIOA_L3GD20_SD0) | PIN_MODE_ALTERNATE(GPIOA_L3GD20_SDI) | PIN_MODE_INPUT(GPIOA_PIN8) | PIN_MODE_INPUT(GPIOA_VBUS_FS) | PIN_MODE_ALTERNATE(GPIOA_OTG_FS_ID) | PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DM) | PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DP) | PIN_MODE_ALTERNATE(GPIOA_SWDIO) | PIN_MODE_ALTERNATE(GPIOA_SWCLK) | PIN_MODE_INPUT(GPIOA_PIN15))
-#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | PIN_OTYPE_PUSHPULL(GPIOA_CS43L22_LRCK) | PIN_OTYPE_PUSHPULL(GPIOA_L3GD20_SCL) | PIN_OTYPE_PUSHPULL(GPIOA_L3GD20_SD0) | PIN_OTYPE_PUSHPULL(GPIOA_L3GD20_SDI) | PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | PIN_OTYPE_PUSHPULL(GPIOA_VBUS_FS) | PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_ID) | PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DM) | PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DP) | PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
-#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_HIGH(GPIOA_BUTTON) | PIN_OSPEED_HIGH(GPIOA_PIN1) | PIN_OSPEED_HIGH(GPIOA_PIN2) | PIN_OSPEED_HIGH(GPIOA_PIN3) | PIN_OSPEED_HIGH(GPIOA_CS43L22_LRCK) | PIN_OSPEED_HIGH(GPIOA_L3GD20_SCL) | PIN_OSPEED_HIGH(GPIOA_L3GD20_SD0) | PIN_OSPEED_HIGH(GPIOA_L3GD20_SDI) | PIN_OSPEED_HIGH(GPIOA_PIN8) | PIN_OSPEED_HIGH(GPIOA_VBUS_FS) | PIN_OSPEED_HIGH(GPIOA_OTG_FS_ID) | PIN_OSPEED_HIGH(GPIOA_OTG_FS_DM) | PIN_OSPEED_HIGH(GPIOA_OTG_FS_DP) | PIN_OSPEED_HIGH(GPIOA_SWDIO) | PIN_OSPEED_HIGH(GPIOA_SWCLK) | PIN_OSPEED_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | PIN_PUPDR_PULLUP(GPIOA_PIN1) | PIN_PUPDR_PULLUP(GPIOA_PIN2) | PIN_PUPDR_PULLUP(GPIOA_PIN3) | PIN_PUPDR_FLOATING(GPIOA_CS43L22_LRCK) | PIN_PUPDR_FLOATING(GPIOA_L3GD20_SCL) | PIN_PUPDR_PULLUP(GPIOA_L3GD20_SD0) | PIN_PUPDR_PULLUP(GPIOA_L3GD20_SDI) | PIN_PUPDR_PULLUP(GPIOA_PIN8) | PIN_PUPDR_FLOATING(GPIOA_VBUS_FS) | PIN_PUPDR_FLOATING(GPIOA_OTG_FS_ID) | PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DM) | PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DP) | PIN_PUPDR_FLOATING(GPIOA_SWDIO) | PIN_PUPDR_FLOATING(GPIOA_SWCLK) | PIN_PUPDR_PULLUP(GPIOA_PIN15))
-#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | PIN_ODR_HIGH(GPIOA_PIN1) | PIN_ODR_HIGH(GPIOA_PIN2) | PIN_ODR_HIGH(GPIOA_PIN3) | PIN_ODR_HIGH(GPIOA_CS43L22_LRCK) | PIN_ODR_HIGH(GPIOA_L3GD20_SCL) | PIN_ODR_HIGH(GPIOA_L3GD20_SD0) | PIN_ODR_HIGH(GPIOA_L3GD20_SDI) | PIN_ODR_HIGH(GPIOA_PIN8) | PIN_ODR_HIGH(GPIOA_VBUS_FS) | PIN_ODR_HIGH(GPIOA_OTG_FS_ID) | PIN_ODR_HIGH(GPIOA_OTG_FS_DM) | PIN_ODR_HIGH(GPIOA_OTG_FS_DP) | PIN_ODR_HIGH(GPIOA_SWDIO) | PIN_ODR_HIGH(GPIOA_SWCLK) | PIN_ODR_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | PIN_AFIO_AF(GPIOA_PIN1, 0U) | PIN_AFIO_AF(GPIOA_PIN2, 0U) | PIN_AFIO_AF(GPIOA_PIN3, 0U) | PIN_AFIO_AF(GPIOA_CS43L22_LRCK, 6U) | PIN_AFIO_AF(GPIOA_L3GD20_SCL, 5U) | PIN_AFIO_AF(GPIOA_L3GD20_SD0, 5U) | PIN_AFIO_AF(GPIOA_L3GD20_SDI, 5U))
-#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | PIN_AFIO_AF(GPIOA_VBUS_FS, 0U) | PIN_AFIO_AF(GPIOA_OTG_FS_ID, 10U) | PIN_AFIO_AF(GPIOA_OTG_FS_DM, 10U) | PIN_AFIO_AF(GPIOA_OTG_FS_DP, 10U) | PIN_AFIO_AF(GPIOA_SWDIO, 0U) | PIN_AFIO_AF(GPIOA_SWCLK, 0U) | PIN_AFIO_AF(GPIOA_PIN15, 0U))
-
-/*
- * GPIOB setup:
- *
- * PB0  - PIN0                      (input pullup).
- * PB1  - PIN1                      (input pullup).
- * PB2  - PIN2                      (input pullup).
- * PB3  - SWO                       (alternate 0).
- * PB4  - PIN4                      (input pullup).
- * PB5  - PIN5                      (input pullup).
- * PB6  - LSM303DLHC_SCL            (alternate 4).
- * PB7  - PIN7                      (input pullup).
- * PB8  - PIN8                      (input pullup).
- * PB9  - LSM303DLHC_SDA            (alternate 4).
- * PB10 - MP45DT02_CLK_IN           (alternate 5).
- * PB11 - PIN11                     (input pullup).
- * PB12 - PIN12                     (input pullup).
- * PB13 - PIN13                     (input pullup).
- * PB14 - PIN14                     (input pullup).
- * PB15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | PIN_MODE_INPUT(GPIOB_PIN1) | PIN_MODE_INPUT(GPIOB_PIN2) | PIN_MODE_ALTERNATE(GPIOB_SWO) | PIN_MODE_INPUT(GPIOB_PIN4) | PIN_MODE_INPUT(GPIOB_PIN5) | PIN_MODE_ALTERNATE(GPIOB_LSM303DLHC_SCL) | PIN_MODE_INPUT(GPIOB_PIN7) | PIN_MODE_INPUT(GPIOB_PIN8) | PIN_MODE_ALTERNATE(GPIOB_LSM303DLHC_SDA) | PIN_MODE_ALTERNATE(GPIOB_MP45DT02_CLK_IN) | PIN_MODE_INPUT(GPIOB_PIN11) | PIN_MODE_INPUT(GPIOB_PIN12) | PIN_MODE_INPUT(GPIOB_PIN13) | PIN_MODE_INPUT(GPIOB_PIN14) | PIN_MODE_INPUT(GPIOB_PIN15))
-#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | PIN_OTYPE_PUSHPULL(GPIOB_SWO) | PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | PIN_OTYPE_PUSHPULL(GPIOB_LSM303DLHC_SCL) | PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | PIN_OTYPE_PUSHPULL(GPIOB_LSM303DLHC_SDA) | PIN_OTYPE_PUSHPULL(GPIOB_MP45DT02_CLK_IN) | PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | PIN_OTYPE_PUSHPULL(GPIOB_PIN15))
-#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_HIGH(GPIOB_PIN0) | PIN_OSPEED_HIGH(GPIOB_PIN1) | PIN_OSPEED_HIGH(GPIOB_PIN2) | PIN_OSPEED_HIGH(GPIOB_SWO) | PIN_OSPEED_HIGH(GPIOB_PIN4) | PIN_OSPEED_HIGH(GPIOB_PIN5) | PIN_OSPEED_HIGH(GPIOB_LSM303DLHC_SCL) | PIN_OSPEED_HIGH(GPIOB_PIN7) | PIN_OSPEED_HIGH(GPIOB_PIN8) | PIN_OSPEED_HIGH(GPIOB_LSM303DLHC_SDA) | PIN_OSPEED_HIGH(GPIOB_MP45DT02_CLK_IN) | PIN_OSPEED_HIGH(GPIOB_PIN11) | PIN_OSPEED_HIGH(GPIOB_PIN12) | PIN_OSPEED_HIGH(GPIOB_PIN13) | PIN_OSPEED_HIGH(GPIOB_PIN14) | PIN_OSPEED_HIGH(GPIOB_PIN15))
-#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | PIN_PUPDR_PULLUP(GPIOB_PIN1) | PIN_PUPDR_PULLUP(GPIOB_PIN2) | PIN_PUPDR_PULLUP(GPIOB_SWO) | PIN_PUPDR_PULLUP(GPIOB_PIN4) | PIN_PUPDR_PULLUP(GPIOB_PIN5) | PIN_PUPDR_FLOATING(GPIOB_LSM303DLHC_SCL) | PIN_PUPDR_PULLUP(GPIOB_PIN7) | PIN_PUPDR_PULLUP(GPIOB_PIN8) | PIN_PUPDR_FLOATING(GPIOB_LSM303DLHC_SDA) | PIN_PUPDR_FLOATING(GPIOB_MP45DT02_CLK_IN) | PIN_PUPDR_PULLUP(GPIOB_PIN11) | PIN_PUPDR_PULLUP(GPIOB_PIN12) | PIN_PUPDR_PULLUP(GPIOB_PIN13) | PIN_PUPDR_PULLUP(GPIOB_PIN14) | PIN_PUPDR_PULLUP(GPIOB_PIN15))
-#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | PIN_ODR_HIGH(GPIOB_PIN1) | PIN_ODR_HIGH(GPIOB_PIN2) | PIN_ODR_HIGH(GPIOB_SWO) | PIN_ODR_HIGH(GPIOB_PIN4) | PIN_ODR_HIGH(GPIOB_PIN5) | PIN_ODR_HIGH(GPIOB_LSM303DLHC_SCL) | PIN_ODR_HIGH(GPIOB_PIN7) | PIN_ODR_HIGH(GPIOB_PIN8) | PIN_ODR_HIGH(GPIOB_LSM303DLHC_SDA) | PIN_ODR_HIGH(GPIOB_MP45DT02_CLK_IN) | PIN_ODR_HIGH(GPIOB_PIN11) | PIN_ODR_HIGH(GPIOB_PIN12) | PIN_ODR_HIGH(GPIOB_PIN13) | PIN_ODR_HIGH(GPIOB_PIN14) | PIN_ODR_HIGH(GPIOB_PIN15))
-#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | PIN_AFIO_AF(GPIOB_PIN1, 0U) | PIN_AFIO_AF(GPIOB_PIN2, 0U) | PIN_AFIO_AF(GPIOB_SWO, 0U) | PIN_AFIO_AF(GPIOB_PIN4, 0U) | PIN_AFIO_AF(GPIOB_PIN5, 0U) | PIN_AFIO_AF(GPIOB_LSM303DLHC_SCL, 4U) | PIN_AFIO_AF(GPIOB_PIN7, 0U))
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | PIN_AFIO_AF(GPIOB_LSM303DLHC_SDA, 4U) | PIN_AFIO_AF(GPIOB_MP45DT02_CLK_IN, 5U) | PIN_AFIO_AF(GPIOB_PIN11, 0U) | PIN_AFIO_AF(GPIOB_PIN12, 0U) | PIN_AFIO_AF(GPIOB_PIN13, 0U) | PIN_AFIO_AF(GPIOB_PIN14, 0U) | PIN_AFIO_AF(GPIOB_PIN15, 0U))
-
-/*
- * GPIOC setup:
- *
- * PC0  - OTG_FS_POWER_ON           (output pushpull maximum).
- * PC1  - PIN1                      (input pullup).
- * PC2  - PIN2                      (input pullup).
- * PC3  - CS43L22_AIN4x MP45DT02_PDM_OUT(alternate 5).
- * PC4  - PIN4                      (input pullup).
- * PC5  - PIN5                      (input pullup).
- * PC6  - PIN6                      (input pullup).
- * PC7  - CS43L22_MCLK              (alternate 6).
- * PC8  - PIN8                      (input pullup).
- * PC9  - PIN9                      (input pullup).
- * PC10 - CS43L22_SCLK              (alternate 6).
- * PC11 - PIN11                     (input pullup).
- * PC12 - CS43L22_SDIN              (alternate 6).
- * PC13 - PIN13                     (input pullup).
- * PC14 - OSC32_IN                  (input floating).
- * PC15 - OSC32_OUT                 (input floating).
- */
-#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_OTG_FS_POWER_ON) | PIN_MODE_INPUT(GPIOC_PIN1) | PIN_MODE_INPUT(GPIOC_PIN2) | PIN_MODE_ALTERNATE(GPIOC_CS43L22_AIN4x) | PIN_MODE_INPUT(GPIOC_PIN4) | PIN_MODE_INPUT(GPIOC_PIN5) | PIN_MODE_INPUT(GPIOC_PIN6) | PIN_MODE_ALTERNATE(GPIOC_CS43L22_MCLK) | PIN_MODE_INPUT(GPIOC_PIN8) | PIN_MODE_INPUT(GPIOC_PIN9) | PIN_MODE_ALTERNATE(GPIOC_CS43L22_SCLK) | PIN_MODE_INPUT(GPIOC_PIN11) | PIN_MODE_ALTERNATE(GPIOC_CS43L22_SDIN) | PIN_MODE_INPUT(GPIOC_PIN13) | PIN_MODE_INPUT(GPIOC_OSC32_IN) | PIN_MODE_INPUT(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_OTG_FS_POWER_ON) | PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | PIN_OTYPE_PUSHPULL(GPIOC_CS43L22_AIN4x) | PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | PIN_OTYPE_PUSHPULL(GPIOC_CS43L22_MCLK) | PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | PIN_OTYPE_PUSHPULL(GPIOC_CS43L22_SCLK) | PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | PIN_OTYPE_PUSHPULL(GPIOC_CS43L22_SDIN) | PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_OTG_FS_POWER_ON) | PIN_OSPEED_HIGH(GPIOC_PIN1) | PIN_OSPEED_HIGH(GPIOC_PIN2) | PIN_OSPEED_HIGH(GPIOC_CS43L22_AIN4x) | PIN_OSPEED_HIGH(GPIOC_PIN4) | PIN_OSPEED_HIGH(GPIOC_PIN5) | PIN_OSPEED_HIGH(GPIOC_PIN6) | PIN_OSPEED_HIGH(GPIOC_CS43L22_MCLK) | PIN_OSPEED_HIGH(GPIOC_PIN8) | PIN_OSPEED_HIGH(GPIOC_PIN9) | PIN_OSPEED_HIGH(GPIOC_CS43L22_SCLK) | PIN_OSPEED_HIGH(GPIOC_PIN11) | PIN_OSPEED_HIGH(GPIOC_CS43L22_SDIN) | PIN_OSPEED_HIGH(GPIOC_PIN13) | PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_OTG_FS_POWER_ON) | PIN_PUPDR_PULLUP(GPIOC_PIN1) | PIN_PUPDR_PULLUP(GPIOC_PIN2) | PIN_PUPDR_FLOATING(GPIOC_CS43L22_AIN4x) | PIN_PUPDR_PULLUP(GPIOC_PIN4) | PIN_PUPDR_PULLUP(GPIOC_PIN5) | PIN_PUPDR_PULLUP(GPIOC_PIN6) | PIN_PUPDR_PULLUP(GPIOC_CS43L22_MCLK) | PIN_PUPDR_PULLUP(GPIOC_PIN8) | PIN_PUPDR_PULLUP(GPIOC_PIN9) | PIN_PUPDR_PULLUP(GPIOC_CS43L22_SCLK) | PIN_PUPDR_PULLUP(GPIOC_PIN11) | PIN_PUPDR_PULLUP(GPIOC_CS43L22_SDIN) | PIN_PUPDR_PULLUP(GPIOC_PIN13) | PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_OTG_FS_POWER_ON) | PIN_ODR_HIGH(GPIOC_PIN1) | PIN_ODR_HIGH(GPIOC_PIN2) | PIN_ODR_HIGH(GPIOC_CS43L22_AIN4x) | PIN_ODR_HIGH(GPIOC_PIN4) | PIN_ODR_HIGH(GPIOC_PIN5) | PIN_ODR_HIGH(GPIOC_PIN6) | PIN_ODR_HIGH(GPIOC_CS43L22_MCLK) | PIN_ODR_HIGH(GPIOC_PIN8) | PIN_ODR_HIGH(GPIOC_PIN9) | PIN_ODR_HIGH(GPIOC_CS43L22_SCLK) | PIN_ODR_HIGH(GPIOC_PIN11) | PIN_ODR_HIGH(GPIOC_CS43L22_SDIN) | PIN_ODR_HIGH(GPIOC_PIN13) | PIN_ODR_HIGH(GPIOC_OSC32_IN) | PIN_ODR_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_OTG_FS_POWER_ON, 0U) | PIN_AFIO_AF(GPIOC_PIN1, 0U) | PIN_AFIO_AF(GPIOC_PIN2, 0U) | PIN_AFIO_AF(GPIOC_CS43L22_AIN4x, 5U) | PIN_AFIO_AF(GPIOC_PIN4, 0U) | PIN_AFIO_AF(GPIOC_PIN5, 0U) | PIN_AFIO_AF(GPIOC_PIN6, 0U) | PIN_AFIO_AF(GPIOC_CS43L22_MCLK, 6U))
-#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0U) | PIN_AFIO_AF(GPIOC_PIN9, 0U) | PIN_AFIO_AF(GPIOC_CS43L22_SCLK, 6U) | PIN_AFIO_AF(GPIOC_PIN11, 0U) | PIN_AFIO_AF(GPIOC_CS43L22_SDIN, 6U) | PIN_AFIO_AF(GPIOC_PIN13, 0U) | PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
-
-/*
- * GPIOD setup:
- *
- * PD0  - PIN0                      (input pullup).
- * PD1  - PIN1                      (input pullup).
- * PD2  - PIN2                      (input pullup).
- * PD3  - PIN3                      (input pullup).
- * PD4  - CS43L22_RESET             (output pushpull maximum).
- * PD5  - OverCurrent               (input floating).
- * PD6  - PIN6                      (input pullup).
- * PD7  - PIN7                      (input pullup).
- * PD8  - PIN8                      (input pullup).
- * PD9  - PIN9                      (input pullup).
- * PD10 - PIN10                     (input pullup).
- * PD11 - PIN11                     (input pullup).
- * PD12 - LED4                      (output pushpull maximum).
- * PD13 - LED3                      (output pushpull maximum).
- * PD14 - LED5                      (output pushpull maximum).
- * PD15 - LED6                      (output pushpull maximum).
- */
-#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | PIN_MODE_INPUT(GPIOD_PIN1) | PIN_MODE_INPUT(GPIOD_PIN2) | PIN_MODE_INPUT(GPIOD_PIN3) | PIN_MODE_OUTPUT(GPIOD_CS43L22_RESET) | PIN_MODE_INPUT(GPIOD_OverCurrent) | PIN_MODE_INPUT(GPIOD_PIN6) | PIN_MODE_INPUT(GPIOD_PIN7) | PIN_MODE_INPUT(GPIOD_PIN8) | PIN_MODE_INPUT(GPIOD_PIN9) | PIN_MODE_INPUT(GPIOD_PIN10) | PIN_MODE_INPUT(GPIOD_PIN11) | PIN_MODE_OUTPUT(GPIOD_LED4) | PIN_MODE_OUTPUT(GPIOD_LED3) | PIN_MODE_OUTPUT(GPIOD_LED5) | PIN_MODE_OUTPUT(GPIOD_LED6))
-#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | PIN_OTYPE_PUSHPULL(GPIOD_CS43L22_RESET) | PIN_OTYPE_PUSHPULL(GPIOD_OverCurrent) | PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | PIN_OTYPE_PUSHPULL(GPIOD_LED4) | PIN_OTYPE_PUSHPULL(GPIOD_LED3) | PIN_OTYPE_PUSHPULL(GPIOD_LED5) | PIN_OTYPE_PUSHPULL(GPIOD_LED6))
-#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_HIGH(GPIOD_PIN0) | PIN_OSPEED_HIGH(GPIOD_PIN1) | PIN_OSPEED_HIGH(GPIOD_PIN2) | PIN_OSPEED_HIGH(GPIOD_PIN3) | PIN_OSPEED_HIGH(GPIOD_CS43L22_RESET) | PIN_OSPEED_HIGH(GPIOD_OverCurrent) | PIN_OSPEED_HIGH(GPIOD_PIN6) | PIN_OSPEED_HIGH(GPIOD_PIN7) | PIN_OSPEED_HIGH(GPIOD_PIN8) | PIN_OSPEED_HIGH(GPIOD_PIN9) | PIN_OSPEED_HIGH(GPIOD_PIN10) | PIN_OSPEED_HIGH(GPIOD_PIN11) | PIN_OSPEED_HIGH(GPIOD_LED4) | PIN_OSPEED_HIGH(GPIOD_LED3) | PIN_OSPEED_HIGH(GPIOD_LED5) | PIN_OSPEED_HIGH(GPIOD_LED6))
-#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | PIN_PUPDR_PULLUP(GPIOD_PIN1) | PIN_PUPDR_PULLUP(GPIOD_PIN2) | PIN_PUPDR_PULLUP(GPIOD_PIN3) | PIN_PUPDR_PULLUP(GPIOD_CS43L22_RESET) | PIN_PUPDR_FLOATING(GPIOD_OverCurrent) | PIN_PUPDR_PULLUP(GPIOD_PIN6) | PIN_PUPDR_PULLUP(GPIOD_PIN7) | PIN_PUPDR_PULLUP(GPIOD_PIN8) | PIN_PUPDR_PULLUP(GPIOD_PIN9) | PIN_PUPDR_PULLUP(GPIOD_PIN10) | PIN_PUPDR_PULLUP(GPIOD_PIN11) | PIN_PUPDR_FLOATING(GPIOD_LED4) | PIN_PUPDR_FLOATING(GPIOD_LED3) | PIN_PUPDR_FLOATING(GPIOD_LED5) | PIN_PUPDR_FLOATING(GPIOD_LED6))
-#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | PIN_ODR_HIGH(GPIOD_PIN1) | PIN_ODR_HIGH(GPIOD_PIN2) | PIN_ODR_HIGH(GPIOD_PIN3) | PIN_ODR_HIGH(GPIOD_CS43L22_RESET) | PIN_ODR_HIGH(GPIOD_OverCurrent) | PIN_ODR_HIGH(GPIOD_PIN6) | PIN_ODR_HIGH(GPIOD_PIN7) | PIN_ODR_HIGH(GPIOD_PIN8) | PIN_ODR_HIGH(GPIOD_PIN9) | PIN_ODR_HIGH(GPIOD_PIN10) | PIN_ODR_HIGH(GPIOD_PIN11) | PIN_ODR_LOW(GPIOD_LED4) | PIN_ODR_LOW(GPIOD_LED3) | PIN_ODR_LOW(GPIOD_LED5) | PIN_ODR_LOW(GPIOD_LED6))
-#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | PIN_AFIO_AF(GPIOD_PIN1, 0U) | PIN_AFIO_AF(GPIOD_PIN2, 0U) | PIN_AFIO_AF(GPIOD_PIN3, 0U) | PIN_AFIO_AF(GPIOD_CS43L22_RESET, 0U) | PIN_AFIO_AF(GPIOD_OverCurrent, 0U) | PIN_AFIO_AF(GPIOD_PIN6, 0U) | PIN_AFIO_AF(GPIOD_PIN7, 0U))
-#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | PIN_AFIO_AF(GPIOD_PIN9, 0U) | PIN_AFIO_AF(GPIOD_PIN10, 0U) | PIN_AFIO_AF(GPIOD_PIN11, 0U) | PIN_AFIO_AF(GPIOD_LED4, 0U) | PIN_AFIO_AF(GPIOD_LED3, 0U) | PIN_AFIO_AF(GPIOD_LED5, 0U) | PIN_AFIO_AF(GPIOD_LED6, 0U))
-
-/*
- * GPIOE setup:
- *
- * PE0  - L3GD20_INT1               (input pullup).
- * PE1  - L3GD20_INT2               (input pullup).
- * PE2  - LSM303DLHC_DRDY           (input floating).
- * PE3  - L3GD20_CS                 (output pushpull maximum).
- * PE4  - LSM303DLHC_INT1           (output pushpull maximum).
- * PE5  - LSM303DLHC_INT2           (output pushpull maximum).
- * PE6  - PIN6                      (input pullup).
- * PE7  - PIN7                      (input pullup).
- * PE8  - PIN8                      (input pullup).
- * PE9  - PIN9                      (input pullup).
- * PE10 - PIN10                     (input pullup).
- * PE11 - PIN11                     (input pullup).
- * PE12 - PIN12                     (input pullup).
- * PE13 - PIN13                     (input pullup).
- * PE14 - PIN14                     (input pullup).
- * PE15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_L3GD20_INT1) | PIN_MODE_INPUT(GPIOE_L3GD20_INT2) | PIN_MODE_INPUT(GPIOE_LSM303DLHC_DRDY) | PIN_MODE_OUTPUT(GPIOE_L3GD20_CS) | PIN_MODE_OUTPUT(GPIOE_LSM303DLHC_INT1) | PIN_MODE_OUTPUT(GPIOE_LSM303DLHC_INT2) | PIN_MODE_INPUT(GPIOE_PIN6) | PIN_MODE_INPUT(GPIOE_PIN7) | PIN_MODE_INPUT(GPIOE_PIN8) | PIN_MODE_INPUT(GPIOE_PIN9) | PIN_MODE_INPUT(GPIOE_PIN10) | PIN_MODE_INPUT(GPIOE_PIN11) | PIN_MODE_INPUT(GPIOE_PIN12) | PIN_MODE_INPUT(GPIOE_PIN13) | PIN_MODE_INPUT(GPIOE_PIN14) | PIN_MODE_INPUT(GPIOE_PIN15))
-#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_L3GD20_INT1) | PIN_OTYPE_PUSHPULL(GPIOE_L3GD20_INT2) | PIN_OTYPE_PUSHPULL(GPIOE_LSM303DLHC_DRDY) | PIN_OTYPE_PUSHPULL(GPIOE_L3GD20_CS) | PIN_OTYPE_PUSHPULL(GPIOE_LSM303DLHC_INT1) | PIN_OTYPE_PUSHPULL(GPIOE_LSM303DLHC_INT2) | PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
-#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_HIGH(GPIOE_L3GD20_INT1) | PIN_OSPEED_HIGH(GPIOE_L3GD20_INT2) | PIN_OSPEED_HIGH(GPIOE_LSM303DLHC_DRDY) | PIN_OSPEED_HIGH(GPIOE_L3GD20_CS) | PIN_OSPEED_HIGH(GPIOE_LSM303DLHC_INT1) | PIN_OSPEED_HIGH(GPIOE_LSM303DLHC_INT2) | PIN_OSPEED_HIGH(GPIOE_PIN6) | PIN_OSPEED_HIGH(GPIOE_PIN7) | PIN_OSPEED_HIGH(GPIOE_PIN8) | PIN_OSPEED_HIGH(GPIOE_PIN9) | PIN_OSPEED_HIGH(GPIOE_PIN10) | PIN_OSPEED_HIGH(GPIOE_PIN11) | PIN_OSPEED_HIGH(GPIOE_PIN12) | PIN_OSPEED_HIGH(GPIOE_PIN13) | PIN_OSPEED_HIGH(GPIOE_PIN14) | PIN_OSPEED_HIGH(GPIOE_PIN15))
-#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_L3GD20_INT1) | PIN_PUPDR_PULLUP(GPIOE_L3GD20_INT2) | PIN_PUPDR_FLOATING(GPIOE_LSM303DLHC_DRDY) | PIN_PUPDR_PULLUP(GPIOE_L3GD20_CS) | PIN_PUPDR_PULLUP(GPIOE_LSM303DLHC_INT1) | PIN_PUPDR_PULLUP(GPIOE_LSM303DLHC_INT2) | PIN_PUPDR_PULLUP(GPIOE_PIN6) | PIN_PUPDR_PULLUP(GPIOE_PIN7) | PIN_PUPDR_PULLUP(GPIOE_PIN8) | PIN_PUPDR_PULLUP(GPIOE_PIN9) | PIN_PUPDR_PULLUP(GPIOE_PIN10) | PIN_PUPDR_PULLUP(GPIOE_PIN11) | PIN_PUPDR_PULLUP(GPIOE_PIN12) | PIN_PUPDR_PULLUP(GPIOE_PIN13) | PIN_PUPDR_PULLUP(GPIOE_PIN14) | PIN_PUPDR_PULLUP(GPIOE_PIN15))
-#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_L3GD20_INT1) | PIN_ODR_HIGH(GPIOE_L3GD20_INT2) | PIN_ODR_HIGH(GPIOE_LSM303DLHC_DRDY) | PIN_ODR_HIGH(GPIOE_L3GD20_CS) | PIN_ODR_HIGH(GPIOE_LSM303DLHC_INT1) | PIN_ODR_HIGH(GPIOE_LSM303DLHC_INT2) | PIN_ODR_HIGH(GPIOE_PIN6) | PIN_ODR_HIGH(GPIOE_PIN7) | PIN_ODR_HIGH(GPIOE_PIN8) | PIN_ODR_HIGH(GPIOE_PIN9) | PIN_ODR_HIGH(GPIOE_PIN10) | PIN_ODR_HIGH(GPIOE_PIN11) | PIN_ODR_HIGH(GPIOE_PIN12) | PIN_ODR_HIGH(GPIOE_PIN13) | PIN_ODR_HIGH(GPIOE_PIN14) | PIN_ODR_HIGH(GPIOE_PIN15))
-#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_L3GD20_INT1, 0U) | PIN_AFIO_AF(GPIOE_L3GD20_INT2, 0U) | PIN_AFIO_AF(GPIOE_LSM303DLHC_DRDY, 0U) | PIN_AFIO_AF(GPIOE_L3GD20_CS, 0U) | PIN_AFIO_AF(GPIOE_LSM303DLHC_INT1, 0U) | PIN_AFIO_AF(GPIOE_LSM303DLHC_INT2, 0U) | PIN_AFIO_AF(GPIOE_PIN6, 0U) | PIN_AFIO_AF(GPIOE_PIN7, 0U))
-#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | PIN_AFIO_AF(GPIOE_PIN9, 0U) | PIN_AFIO_AF(GPIOE_PIN10, 0U) | PIN_AFIO_AF(GPIOE_PIN11, 0U) | PIN_AFIO_AF(GPIOE_PIN12, 0U) | PIN_AFIO_AF(GPIOE_PIN13, 0U) | PIN_AFIO_AF(GPIOE_PIN14, 0U) | PIN_AFIO_AF(GPIOE_PIN15, 0U))
-
-/*
- * GPIOF setup:
- *
- * PF0  - PIN0                      (input pullup).
- * PF1  - PIN1                      (input pullup).
- * PF2  - PIN2                      (input pullup).
- * PF3  - PIN3                      (input pullup).
- * PF4  - PIN4                      (input pullup).
- * PF5  - PIN5                      (input pullup).
- * PF6  - PIN6                      (input pullup).
- * PF7  - PIN7                      (input pullup).
- * PF8  - PIN8                      (input pullup).
- * PF9  - PIN9                      (input pullup).
- * PF10 - PIN10                     (input pullup).
- * PF11 - PIN11                     (input pullup).
- * PF12 - PIN12                     (input pullup).
- * PF13 - PIN13                     (input pullup).
- * PF14 - PIN14                     (input pullup).
- * PF15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_PIN0) | PIN_MODE_INPUT(GPIOF_PIN1) | PIN_MODE_INPUT(GPIOF_PIN2) | PIN_MODE_INPUT(GPIOF_PIN3) | PIN_MODE_INPUT(GPIOF_PIN4) | PIN_MODE_INPUT(GPIOF_PIN5) | PIN_MODE_INPUT(GPIOF_PIN6) | PIN_MODE_INPUT(GPIOF_PIN7) | PIN_MODE_INPUT(GPIOF_PIN8) | PIN_MODE_INPUT(GPIOF_PIN9) | PIN_MODE_INPUT(GPIOF_PIN10) | PIN_MODE_INPUT(GPIOF_PIN11) | PIN_MODE_INPUT(GPIOF_PIN12) | PIN_MODE_INPUT(GPIOF_PIN13) | PIN_MODE_INPUT(GPIOF_PIN14) | PIN_MODE_INPUT(GPIOF_PIN15))
-#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_PIN0) | PIN_OTYPE_PUSHPULL(GPIOF_PIN1) | PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
-#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_HIGH(GPIOF_PIN0) | PIN_OSPEED_HIGH(GPIOF_PIN1) | PIN_OSPEED_HIGH(GPIOF_PIN2) | PIN_OSPEED_HIGH(GPIOF_PIN3) | PIN_OSPEED_HIGH(GPIOF_PIN4) | PIN_OSPEED_HIGH(GPIOF_PIN5) | PIN_OSPEED_HIGH(GPIOF_PIN6) | PIN_OSPEED_HIGH(GPIOF_PIN7) | PIN_OSPEED_HIGH(GPIOF_PIN8) | PIN_OSPEED_HIGH(GPIOF_PIN9) | PIN_OSPEED_HIGH(GPIOF_PIN10) | PIN_OSPEED_HIGH(GPIOF_PIN11) | PIN_OSPEED_HIGH(GPIOF_PIN12) | PIN_OSPEED_HIGH(GPIOF_PIN13) | PIN_OSPEED_HIGH(GPIOF_PIN14) | PIN_OSPEED_HIGH(GPIOF_PIN15))
-#define VAL_GPIOF_PUPDR (PIN_PUPDR_PULLUP(GPIOF_PIN0) | PIN_PUPDR_PULLUP(GPIOF_PIN1) | PIN_PUPDR_PULLUP(GPIOF_PIN2) | PIN_PUPDR_PULLUP(GPIOF_PIN3) | PIN_PUPDR_PULLUP(GPIOF_PIN4) | PIN_PUPDR_PULLUP(GPIOF_PIN5) | PIN_PUPDR_PULLUP(GPIOF_PIN6) | PIN_PUPDR_PULLUP(GPIOF_PIN7) | PIN_PUPDR_PULLUP(GPIOF_PIN8) | PIN_PUPDR_PULLUP(GPIOF_PIN9) | PIN_PUPDR_PULLUP(GPIOF_PIN10) | PIN_PUPDR_PULLUP(GPIOF_PIN11) | PIN_PUPDR_PULLUP(GPIOF_PIN12) | PIN_PUPDR_PULLUP(GPIOF_PIN13) | PIN_PUPDR_PULLUP(GPIOF_PIN14) | PIN_PUPDR_PULLUP(GPIOF_PIN15))
-#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_PIN0) | PIN_ODR_HIGH(GPIOF_PIN1) | PIN_ODR_HIGH(GPIOF_PIN2) | PIN_ODR_HIGH(GPIOF_PIN3) | PIN_ODR_HIGH(GPIOF_PIN4) | PIN_ODR_HIGH(GPIOF_PIN5) | PIN_ODR_HIGH(GPIOF_PIN6) | PIN_ODR_HIGH(GPIOF_PIN7) | PIN_ODR_HIGH(GPIOF_PIN8) | PIN_ODR_HIGH(GPIOF_PIN9) | PIN_ODR_HIGH(GPIOF_PIN10) | PIN_ODR_HIGH(GPIOF_PIN11) | PIN_ODR_HIGH(GPIOF_PIN12) | PIN_ODR_HIGH(GPIOF_PIN13) | PIN_ODR_HIGH(GPIOF_PIN14) | PIN_ODR_HIGH(GPIOF_PIN15))
-#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_PIN0, 0U) | PIN_AFIO_AF(GPIOF_PIN1, 0U) | PIN_AFIO_AF(GPIOF_PIN2, 0U) | PIN_AFIO_AF(GPIOF_PIN3, 0U) | PIN_AFIO_AF(GPIOF_PIN4, 0U) | PIN_AFIO_AF(GPIOF_PIN5, 0U) | PIN_AFIO_AF(GPIOF_PIN6, 0U) | PIN_AFIO_AF(GPIOF_PIN7, 0U))
-#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | PIN_AFIO_AF(GPIOF_PIN9, 0U) | PIN_AFIO_AF(GPIOF_PIN10, 0U) | PIN_AFIO_AF(GPIOF_PIN11, 0U) | PIN_AFIO_AF(GPIOF_PIN12, 0U) | PIN_AFIO_AF(GPIOF_PIN13, 0U) | PIN_AFIO_AF(GPIOF_PIN14, 0U) | PIN_AFIO_AF(GPIOF_PIN15, 0U))
-
-/*
- * GPIOG setup:
- *
- * PG0  - PIN0                      (input pullup).
- * PG1  - PIN1                      (input pullup).
- * PG2  - PIN2                      (input pullup).
- * PG3  - PIN3                      (input pullup).
- * PG4  - PIN4                      (input pullup).
- * PG5  - PIN5                      (input pullup).
- * PG6  - PIN6                      (input pullup).
- * PG7  - PIN7                      (input pullup).
- * PG8  - PIN8                      (input pullup).
- * PG9  - PIN9                      (input pullup).
- * PG10 - PIN10                     (input pullup).
- * PG11 - PIN11                     (input pullup).
- * PG12 - PIN12                     (input pullup).
- * PG13 - PIN13                     (input pullup).
- * PG14 - PIN14                     (input pullup).
- * PG15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_PIN0) | PIN_MODE_INPUT(GPIOG_PIN1) | PIN_MODE_INPUT(GPIOG_PIN2) | PIN_MODE_INPUT(GPIOG_PIN3) | PIN_MODE_INPUT(GPIOG_PIN4) | PIN_MODE_INPUT(GPIOG_PIN5) | PIN_MODE_INPUT(GPIOG_PIN6) | PIN_MODE_INPUT(GPIOG_PIN7) | PIN_MODE_INPUT(GPIOG_PIN8) | PIN_MODE_INPUT(GPIOG_PIN9) | PIN_MODE_INPUT(GPIOG_PIN10) | PIN_MODE_INPUT(GPIOG_PIN11) | PIN_MODE_INPUT(GPIOG_PIN12) | PIN_MODE_INPUT(GPIOG_PIN13) | PIN_MODE_INPUT(GPIOG_PIN14) | PIN_MODE_INPUT(GPIOG_PIN15))
-#define VAL_GPIOG_OTYPER (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) | PIN_OTYPE_PUSHPULL(GPIOG_PIN1) | PIN_OTYPE_PUSHPULL(GPIOG_PIN2) | PIN_OTYPE_PUSHPULL(GPIOG_PIN3) | PIN_OTYPE_PUSHPULL(GPIOG_PIN4) | PIN_OTYPE_PUSHPULL(GPIOG_PIN5) | PIN_OTYPE_PUSHPULL(GPIOG_PIN6) | PIN_OTYPE_PUSHPULL(GPIOG_PIN7) | PIN_OTYPE_PUSHPULL(GPIOG_PIN8) | PIN_OTYPE_PUSHPULL(GPIOG_PIN9) | PIN_OTYPE_PUSHPULL(GPIOG_PIN10) | PIN_OTYPE_PUSHPULL(GPIOG_PIN11) | PIN_OTYPE_PUSHPULL(GPIOG_PIN12) | PIN_OTYPE_PUSHPULL(GPIOG_PIN13) | PIN_OTYPE_PUSHPULL(GPIOG_PIN14) | PIN_OTYPE_PUSHPULL(GPIOG_PIN15))
-#define VAL_GPIOG_OSPEEDR (PIN_OSPEED_HIGH(GPIOG_PIN0) | PIN_OSPEED_HIGH(GPIOG_PIN1) | PIN_OSPEED_HIGH(GPIOG_PIN2) | PIN_OSPEED_HIGH(GPIOG_PIN3) | PIN_OSPEED_HIGH(GPIOG_PIN4) | PIN_OSPEED_HIGH(GPIOG_PIN5) | PIN_OSPEED_HIGH(GPIOG_PIN6) | PIN_OSPEED_HIGH(GPIOG_PIN7) | PIN_OSPEED_HIGH(GPIOG_PIN8) | PIN_OSPEED_HIGH(GPIOG_PIN9) | PIN_OSPEED_HIGH(GPIOG_PIN10) | PIN_OSPEED_HIGH(GPIOG_PIN11) | PIN_OSPEED_HIGH(GPIOG_PIN12) | PIN_OSPEED_HIGH(GPIOG_PIN13) | PIN_OSPEED_HIGH(GPIOG_PIN14) | PIN_OSPEED_HIGH(GPIOG_PIN15))
-#define VAL_GPIOG_PUPDR (PIN_PUPDR_PULLUP(GPIOG_PIN0) | PIN_PUPDR_PULLUP(GPIOG_PIN1) | PIN_PUPDR_PULLUP(GPIOG_PIN2) | PIN_PUPDR_PULLUP(GPIOG_PIN3) | PIN_PUPDR_PULLUP(GPIOG_PIN4) | PIN_PUPDR_PULLUP(GPIOG_PIN5) | PIN_PUPDR_PULLUP(GPIOG_PIN6) | PIN_PUPDR_PULLUP(GPIOG_PIN7) | PIN_PUPDR_PULLUP(GPIOG_PIN8) | PIN_PUPDR_PULLUP(GPIOG_PIN9) | PIN_PUPDR_PULLUP(GPIOG_PIN10) | PIN_PUPDR_PULLUP(GPIOG_PIN11) | PIN_PUPDR_PULLUP(GPIOG_PIN12) | PIN_PUPDR_PULLUP(GPIOG_PIN13) | PIN_PUPDR_PULLUP(GPIOG_PIN14) | PIN_PUPDR_PULLUP(GPIOG_PIN15))
-#define VAL_GPIOG_ODR (PIN_ODR_HIGH(GPIOG_PIN0) | PIN_ODR_HIGH(GPIOG_PIN1) | PIN_ODR_HIGH(GPIOG_PIN2) | PIN_ODR_HIGH(GPIOG_PIN3) | PIN_ODR_HIGH(GPIOG_PIN4) | PIN_ODR_HIGH(GPIOG_PIN5) | PIN_ODR_HIGH(GPIOG_PIN6) | PIN_ODR_HIGH(GPIOG_PIN7) | PIN_ODR_HIGH(GPIOG_PIN8) | PIN_ODR_HIGH(GPIOG_PIN9) | PIN_ODR_HIGH(GPIOG_PIN10) | PIN_ODR_HIGH(GPIOG_PIN11) | PIN_ODR_HIGH(GPIOG_PIN12) | PIN_ODR_HIGH(GPIOG_PIN13) | PIN_ODR_HIGH(GPIOG_PIN14) | PIN_ODR_HIGH(GPIOG_PIN15))
-#define VAL_GPIOG_AFRL (PIN_AFIO_AF(GPIOG_PIN0, 0U) | PIN_AFIO_AF(GPIOG_PIN1, 0U) | PIN_AFIO_AF(GPIOG_PIN2, 0U) | PIN_AFIO_AF(GPIOG_PIN3, 0U) | PIN_AFIO_AF(GPIOG_PIN4, 0U) | PIN_AFIO_AF(GPIOG_PIN5, 0U) | PIN_AFIO_AF(GPIOG_PIN6, 0U) | PIN_AFIO_AF(GPIOG_PIN7, 0U))
-#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_PIN8, 0U) | PIN_AFIO_AF(GPIOG_PIN9, 0U) | PIN_AFIO_AF(GPIOG_PIN10, 0U) | PIN_AFIO_AF(GPIOG_PIN11, 0U) | PIN_AFIO_AF(GPIOG_PIN12, 0U) | PIN_AFIO_AF(GPIOG_PIN13, 0U) | PIN_AFIO_AF(GPIOG_PIN14, 0U) | PIN_AFIO_AF(GPIOG_PIN15, 0U))
-
-/*
- * GPIOH setup:
- *
- * PH0  - OSC_IN                    (input floating).
- * PH1  - OSC_OUT                   (input floating).
- * PH2  - PIN2                      (input pullup).
- * PH3  - PIN3                      (input pullup).
- * PH4  - PIN4                      (input pullup).
- * PH5  - PIN5                      (input pullup).
- * PH6  - PIN6                      (input pullup).
- * PH7  - PIN7                      (input pullup).
- * PH8  - PIN8                      (input pullup).
- * PH9  - PIN9                      (input pullup).
- * PH10 - PIN10                     (input pullup).
- * PH11 - PIN11                     (input pullup).
- * PH12 - PIN12                     (input pullup).
- * PH13 - PIN13                     (input pullup).
- * PH14 - PIN14                     (input pullup).
- * PH15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_OSC_IN) | PIN_MODE_INPUT(GPIOH_OSC_OUT) | PIN_MODE_INPUT(GPIOH_PIN2) | PIN_MODE_INPUT(GPIOH_PIN3) | PIN_MODE_INPUT(GPIOH_PIN4) | PIN_MODE_INPUT(GPIOH_PIN5) | PIN_MODE_INPUT(GPIOH_PIN6) | PIN_MODE_INPUT(GPIOH_PIN7) | PIN_MODE_INPUT(GPIOH_PIN8) | PIN_MODE_INPUT(GPIOH_PIN9) | PIN_MODE_INPUT(GPIOH_PIN10) | PIN_MODE_INPUT(GPIOH_PIN11) | PIN_MODE_INPUT(GPIOH_PIN12) | PIN_MODE_INPUT(GPIOH_PIN13) | PIN_MODE_INPUT(GPIOH_PIN14) | PIN_MODE_INPUT(GPIOH_PIN15))
-#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_OSC_IN) | PIN_OTYPE_PUSHPULL(GPIOH_OSC_OUT) | PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | PIN_OTYPE_PUSHPULL(GPIOH_PIN7) | PIN_OTYPE_PUSHPULL(GPIOH_PIN8) | PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | PIN_OTYPE_PUSHPULL(GPIOH_PIN15))
-#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_HIGH(GPIOH_OSC_IN) | PIN_OSPEED_HIGH(GPIOH_OSC_OUT) | PIN_OSPEED_HIGH(GPIOH_PIN2) | PIN_OSPEED_HIGH(GPIOH_PIN3) | PIN_OSPEED_HIGH(GPIOH_PIN4) | PIN_OSPEED_HIGH(GPIOH_PIN5) | PIN_OSPEED_HIGH(GPIOH_PIN6) | PIN_OSPEED_HIGH(GPIOH_PIN7) | PIN_OSPEED_HIGH(GPIOH_PIN8) | PIN_OSPEED_HIGH(GPIOH_PIN9) | PIN_OSPEED_HIGH(GPIOH_PIN10) | PIN_OSPEED_HIGH(GPIOH_PIN11) | PIN_OSPEED_HIGH(GPIOH_PIN12) | PIN_OSPEED_HIGH(GPIOH_PIN13) | PIN_OSPEED_HIGH(GPIOH_PIN14) | PIN_OSPEED_HIGH(GPIOH_PIN15))
-#define VAL_GPIOH_PUPDR (PIN_PUPDR_FLOATING(GPIOH_OSC_IN) | PIN_PUPDR_FLOATING(GPIOH_OSC_OUT) | PIN_PUPDR_PULLUP(GPIOH_PIN2) | PIN_PUPDR_PULLUP(GPIOH_PIN3) | PIN_PUPDR_PULLUP(GPIOH_PIN4) | PIN_PUPDR_PULLUP(GPIOH_PIN5) | PIN_PUPDR_PULLUP(GPIOH_PIN6) | PIN_PUPDR_PULLUP(GPIOH_PIN7) | PIN_PUPDR_PULLUP(GPIOH_PIN8) | PIN_PUPDR_PULLUP(GPIOH_PIN9) | PIN_PUPDR_PULLUP(GPIOH_PIN10) | PIN_PUPDR_PULLUP(GPIOH_PIN11) | PIN_PUPDR_PULLUP(GPIOH_PIN12) | PIN_PUPDR_PULLUP(GPIOH_PIN13) | PIN_PUPDR_PULLUP(GPIOH_PIN14) | PIN_PUPDR_PULLUP(GPIOH_PIN15))
-#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_OSC_IN) | PIN_ODR_HIGH(GPIOH_OSC_OUT) | PIN_ODR_HIGH(GPIOH_PIN2) | PIN_ODR_HIGH(GPIOH_PIN3) | PIN_ODR_HIGH(GPIOH_PIN4) | PIN_ODR_HIGH(GPIOH_PIN5) | PIN_ODR_HIGH(GPIOH_PIN6) | PIN_ODR_HIGH(GPIOH_PIN7) | PIN_ODR_HIGH(GPIOH_PIN8) | PIN_ODR_HIGH(GPIOH_PIN9) | PIN_ODR_HIGH(GPIOH_PIN10) | PIN_ODR_HIGH(GPIOH_PIN11) | PIN_ODR_HIGH(GPIOH_PIN12) | PIN_ODR_HIGH(GPIOH_PIN13) | PIN_ODR_HIGH(GPIOH_PIN14) | PIN_ODR_HIGH(GPIOH_PIN15))
-#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_OSC_IN, 0U) | PIN_AFIO_AF(GPIOH_OSC_OUT, 0U) | PIN_AFIO_AF(GPIOH_PIN2, 0U) | PIN_AFIO_AF(GPIOH_PIN3, 0U) | PIN_AFIO_AF(GPIOH_PIN4, 0U) | PIN_AFIO_AF(GPIOH_PIN5, 0U) | PIN_AFIO_AF(GPIOH_PIN6, 0U) | PIN_AFIO_AF(GPIOH_PIN7, 0U))
-#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_PIN8, 0U) | PIN_AFIO_AF(GPIOH_PIN9, 0U) | PIN_AFIO_AF(GPIOH_PIN10, 0U) | PIN_AFIO_AF(GPIOH_PIN11, 0U) | PIN_AFIO_AF(GPIOH_PIN12, 0U) | PIN_AFIO_AF(GPIOH_PIN13, 0U) | PIN_AFIO_AF(GPIOH_PIN14, 0U) | PIN_AFIO_AF(GPIOH_PIN15, 0U))
-
-/*
- * GPIOI setup:
- *
- * PI0  - PIN0                      (input pullup).
- * PI1  - PIN1                      (input pullup).
- * PI2  - PIN2                      (input pullup).
- * PI3  - PIN3                      (input pullup).
- * PI4  - PIN4                      (input pullup).
- * PI5  - PIN5                      (input pullup).
- * PI6  - PIN6                      (input pullup).
- * PI7  - PIN7                      (input pullup).
- * PI8  - PIN8                      (input pullup).
- * PI9  - PIN9                      (input pullup).
- * PI10 - PIN10                     (input pullup).
- * PI11 - PIN11                     (input pullup).
- * PI12 - PIN12                     (input pullup).
- * PI13 - PIN13                     (input pullup).
- * PI14 - PIN14                     (input pullup).
- * PI15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOI_MODER (PIN_MODE_INPUT(GPIOI_PIN0) | PIN_MODE_INPUT(GPIOI_PIN1) | PIN_MODE_INPUT(GPIOI_PIN2) | PIN_MODE_INPUT(GPIOI_PIN3) | PIN_MODE_INPUT(GPIOI_PIN4) | PIN_MODE_INPUT(GPIOI_PIN5) | PIN_MODE_INPUT(GPIOI_PIN6) | PIN_MODE_INPUT(GPIOI_PIN7) | PIN_MODE_INPUT(GPIOI_PIN8) | PIN_MODE_INPUT(GPIOI_PIN9) | PIN_MODE_INPUT(GPIOI_PIN10) | PIN_MODE_INPUT(GPIOI_PIN11) | PIN_MODE_INPUT(GPIOI_PIN12) | PIN_MODE_INPUT(GPIOI_PIN13) | PIN_MODE_INPUT(GPIOI_PIN14) | PIN_MODE_INPUT(GPIOI_PIN15))
-#define VAL_GPIOI_OTYPER (PIN_OTYPE_PUSHPULL(GPIOI_PIN0) | PIN_OTYPE_PUSHPULL(GPIOI_PIN1) | PIN_OTYPE_PUSHPULL(GPIOI_PIN2) | PIN_OTYPE_PUSHPULL(GPIOI_PIN3) | PIN_OTYPE_PUSHPULL(GPIOI_PIN4) | PIN_OTYPE_PUSHPULL(GPIOI_PIN5) | PIN_OTYPE_PUSHPULL(GPIOI_PIN6) | PIN_OTYPE_PUSHPULL(GPIOI_PIN7) | PIN_OTYPE_PUSHPULL(GPIOI_PIN8) | PIN_OTYPE_PUSHPULL(GPIOI_PIN9) | PIN_OTYPE_PUSHPULL(GPIOI_PIN10) | PIN_OTYPE_PUSHPULL(GPIOI_PIN11) | PIN_OTYPE_PUSHPULL(GPIOI_PIN12) | PIN_OTYPE_PUSHPULL(GPIOI_PIN13) | PIN_OTYPE_PUSHPULL(GPIOI_PIN14) | PIN_OTYPE_PUSHPULL(GPIOI_PIN15))
-#define VAL_GPIOI_OSPEEDR (PIN_OSPEED_HIGH(GPIOI_PIN0) | PIN_OSPEED_HIGH(GPIOI_PIN1) | PIN_OSPEED_HIGH(GPIOI_PIN2) | PIN_OSPEED_HIGH(GPIOI_PIN3) | PIN_OSPEED_HIGH(GPIOI_PIN4) | PIN_OSPEED_HIGH(GPIOI_PIN5) | PIN_OSPEED_HIGH(GPIOI_PIN6) | PIN_OSPEED_HIGH(GPIOI_PIN7) | PIN_OSPEED_HIGH(GPIOI_PIN8) | PIN_OSPEED_HIGH(GPIOI_PIN9) | PIN_OSPEED_HIGH(GPIOI_PIN10) | PIN_OSPEED_HIGH(GPIOI_PIN11) | PIN_OSPEED_HIGH(GPIOI_PIN12) | PIN_OSPEED_HIGH(GPIOI_PIN13) | PIN_OSPEED_HIGH(GPIOI_PIN14) | PIN_OSPEED_HIGH(GPIOI_PIN15))
-#define VAL_GPIOI_PUPDR (PIN_PUPDR_PULLUP(GPIOI_PIN0) | PIN_PUPDR_PULLUP(GPIOI_PIN1) | PIN_PUPDR_PULLUP(GPIOI_PIN2) | PIN_PUPDR_PULLUP(GPIOI_PIN3) | PIN_PUPDR_PULLUP(GPIOI_PIN4) | PIN_PUPDR_PULLUP(GPIOI_PIN5) | PIN_PUPDR_PULLUP(GPIOI_PIN6) | PIN_PUPDR_PULLUP(GPIOI_PIN7) | PIN_PUPDR_PULLUP(GPIOI_PIN8) | PIN_PUPDR_PULLUP(GPIOI_PIN9) | PIN_PUPDR_PULLUP(GPIOI_PIN10) | PIN_PUPDR_PULLUP(GPIOI_PIN11) | PIN_PUPDR_PULLUP(GPIOI_PIN12) | PIN_PUPDR_PULLUP(GPIOI_PIN13) | PIN_PUPDR_PULLUP(GPIOI_PIN14) | PIN_PUPDR_PULLUP(GPIOI_PIN15))
-#define VAL_GPIOI_ODR (PIN_ODR_HIGH(GPIOI_PIN0) | PIN_ODR_HIGH(GPIOI_PIN1) | PIN_ODR_HIGH(GPIOI_PIN2) | PIN_ODR_HIGH(GPIOI_PIN3) | PIN_ODR_HIGH(GPIOI_PIN4) | PIN_ODR_HIGH(GPIOI_PIN5) | PIN_ODR_HIGH(GPIOI_PIN6) | PIN_ODR_HIGH(GPIOI_PIN7) | PIN_ODR_HIGH(GPIOI_PIN8) | PIN_ODR_HIGH(GPIOI_PIN9) | PIN_ODR_HIGH(GPIOI_PIN10) | PIN_ODR_HIGH(GPIOI_PIN11) | PIN_ODR_HIGH(GPIOI_PIN12) | PIN_ODR_HIGH(GPIOI_PIN13) | PIN_ODR_HIGH(GPIOI_PIN14) | PIN_ODR_HIGH(GPIOI_PIN15))
-#define VAL_GPIOI_AFRL (PIN_AFIO_AF(GPIOI_PIN0, 0U) | PIN_AFIO_AF(GPIOI_PIN1, 0U) | PIN_AFIO_AF(GPIOI_PIN2, 0U) | PIN_AFIO_AF(GPIOI_PIN3, 0U) | PIN_AFIO_AF(GPIOI_PIN4, 0U) | PIN_AFIO_AF(GPIOI_PIN5, 0U) | PIN_AFIO_AF(GPIOI_PIN6, 0U) | PIN_AFIO_AF(GPIOI_PIN7, 0U))
-#define VAL_GPIOI_AFRH (PIN_AFIO_AF(GPIOI_PIN8, 0U) | PIN_AFIO_AF(GPIOI_PIN9, 0U) | PIN_AFIO_AF(GPIOI_PIN10, 0U) | PIN_AFIO_AF(GPIOI_PIN11, 0U) | PIN_AFIO_AF(GPIOI_PIN12, 0U) | PIN_AFIO_AF(GPIOI_PIN13, 0U) | PIN_AFIO_AF(GPIOI_PIN14, 0U) | PIN_AFIO_AF(GPIOI_PIN15, 0U))
-
-/*===========================================================================*/
-/* External declarations.                                                    */
-/*===========================================================================*/
-
-#if !defined(_FROM_ASM_)
-#    ifdef __cplusplus
-extern "C" {
-#    endif
-void boardInit(void);
-#    ifdef __cplusplus
-}
-#    endif
-#endif /* _FROM_ASM_ */
-
-#endif /* BOARD_H */

drivers/boards/BLACKPILL_STM32_F401/cfg/board.fmpp

@@ -1,15 +0,0 @@
-sourceRoot: ../../../../../tools/ftl/processors/boards/stm32f4xx/templates
-outputRoot: ..
-dataRoot: .
-
-freemarkerLinks: {
-    lib: ../../../../../tools/ftl/libs
-}
-
-data : {
-  doc1:xml (
-    board.chcfg
-    {
-    }
-  )
-}

drivers/boards/BLACKPILL_STM32_F411/board.c

@@ -1,250 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * This file has been automatically generated using ChibiStudio board
- * generator plugin. Do not edit manually.
- */
-
-#include "hal.h"
-#include "stm32_gpio.h"
-
-/*===========================================================================*/
-/* Driver local definitions.                                                 */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported variables.                                                */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local variables and types.                                         */
-/*===========================================================================*/
-
-/**
- * @brief   Type of STM32 GPIO port setup.
- */
-typedef struct {
-    uint32_t moder;
-    uint32_t otyper;
-    uint32_t ospeedr;
-    uint32_t pupdr;
-    uint32_t odr;
-    uint32_t afrl;
-    uint32_t afrh;
-} gpio_setup_t;
-
-/**
- * @brief   Type of STM32 GPIO initialization data.
- */
-typedef struct {
-#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
-    gpio_setup_t PAData;
-#endif
-#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
-    gpio_setup_t PBData;
-#endif
-#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
-    gpio_setup_t PCData;
-#endif
-#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
-    gpio_setup_t PDData;
-#endif
-#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
-    gpio_setup_t PEData;
-#endif
-#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
-    gpio_setup_t PFData;
-#endif
-#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
-    gpio_setup_t PGData;
-#endif
-#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
-    gpio_setup_t PHData;
-#endif
-#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
-    gpio_setup_t PIData;
-#endif
-#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)
-    gpio_setup_t PJData;
-#endif
-#if STM32_HAS_GPIOK || defined(__DOXYGEN__)
-    gpio_setup_t PKData;
-#endif
-} gpio_config_t;
-
-/**
- * @brief   STM32 GPIO static initialization data.
- */
-static const gpio_config_t gpio_default_config = {
-#if STM32_HAS_GPIOA
-    {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
-#endif
-#if STM32_HAS_GPIOB
-    {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
-#endif
-#if STM32_HAS_GPIOC
-    {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
-#endif
-#if STM32_HAS_GPIOD
-    {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
-#endif
-#if STM32_HAS_GPIOE
-    {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
-#endif
-#if STM32_HAS_GPIOF
-    {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
-#endif
-#if STM32_HAS_GPIOG
-    {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
-#endif
-#if STM32_HAS_GPIOH
-    {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
-#endif
-#if STM32_HAS_GPIOI
-    {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH},
-#endif
-#if STM32_HAS_GPIOJ
-    {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH},
-#endif
-#if STM32_HAS_GPIOK
-    {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH}
-#endif
-};
-
-/*===========================================================================*/
-/* Driver local functions.                                                   */
-/*===========================================================================*/
-
-static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) {
-    gpiop->OTYPER  = config->otyper;
-    gpiop->OSPEEDR = config->ospeedr;
-    gpiop->PUPDR   = config->pupdr;
-    gpiop->ODR     = config->odr;
-    gpiop->AFRL    = config->afrl;
-    gpiop->AFRH    = config->afrh;
-    gpiop->MODER   = config->moder;
-}
-
-static void stm32_gpio_init(void) {
-    /* Enabling GPIO-related clocks, the mask comes from the
-       registry header file.*/
-    rccResetAHB1(STM32_GPIO_EN_MASK);
-    rccEnableAHB1(STM32_GPIO_EN_MASK, true);
-
-    /* Initializing all the defined GPIO ports.*/
-#if STM32_HAS_GPIOA
-    gpio_init(GPIOA, &gpio_default_config.PAData);
-#endif
-#if STM32_HAS_GPIOB
-    gpio_init(GPIOB, &gpio_default_config.PBData);
-#endif
-#if STM32_HAS_GPIOC
-    gpio_init(GPIOC, &gpio_default_config.PCData);
-#endif
-#if STM32_HAS_GPIOD
-    gpio_init(GPIOD, &gpio_default_config.PDData);
-#endif
-#if STM32_HAS_GPIOE
-    gpio_init(GPIOE, &gpio_default_config.PEData);
-#endif
-#if STM32_HAS_GPIOF
-    gpio_init(GPIOF, &gpio_default_config.PFData);
-#endif
-#if STM32_HAS_GPIOG
-    gpio_init(GPIOG, &gpio_default_config.PGData);
-#endif
-#if STM32_HAS_GPIOH
-    gpio_init(GPIOH, &gpio_default_config.PHData);
-#endif
-#if STM32_HAS_GPIOI
-    gpio_init(GPIOI, &gpio_default_config.PIData);
-#endif
-#if STM32_HAS_GPIOJ
-    gpio_init(GPIOJ, &gpio_default_config.PJData);
-#endif
-#if STM32_HAS_GPIOK
-    gpio_init(GPIOK, &gpio_default_config.PKData);
-#endif
-}
-
-/*===========================================================================*/
-/* Driver interrupt handlers.                                                */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported functions.                                                */
-/*===========================================================================*/
-
-__attribute__((weak)) void enter_bootloader_mode_if_requested(void) {}
-
-/**
- * @brief   Early initialization code.
- * @details GPIO ports and system clocks are initialized before everything
- *          else.
- */
-void __early_init(void) {
-    enter_bootloader_mode_if_requested();
-
-    stm32_gpio_init();
-    stm32_clock_init();
-}
-
-#if HAL_USE_SDC || defined(__DOXYGEN__)
-/**
- * @brief   SDC card detection.
- */
-bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
-    (void)sdcp;
-    /* TODO: Fill the implementation.*/
-    return true;
-}
-
-/**
- * @brief   SDC card write protection detection.
- */
-bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
-    (void)sdcp;
-    /* TODO: Fill the implementation.*/
-    return false;
-}
-#endif /* HAL_USE_SDC */
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief   MMC_SPI card detection.
- */
-bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-    (void)mmcp;
-    /* TODO: Fill the implementation.*/
-    return true;
-}
-
-/**
- * @brief   MMC_SPI card write protection detection.
- */
-bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
-    (void)mmcp;
-    /* TODO: Fill the implementation.*/
-    return false;
-}
-#endif
-
-/**
- * @brief   Board-specific initialization code.
- * @todo    Add your board-specific code, if any.
- */
-void boardInit(void) {}

drivers/boards/BLACKPILL_STM32_F411/board.h

@@ -1,583 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * This file has been automatically generated using ChibiStudio board
- * generator plugin. Do not edit manually.
- */
-
-#ifndef BOARD_H
-#define BOARD_H
-
-/*===========================================================================*/
-/* Driver constants.                                                         */
-/*===========================================================================*/
-
-/*
- * Setup for STM32F411CEU6 black pill board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_BLACKPILL_STM32_F411
-#define BOARD_NAME "STM32F411CEU6 blackpill"
-
-/*
- * Allow Board to boot USB without extra A9 hardware/software config
- */
-#define BOARD_OTG_NOVBUSSENS 1
-
-/*
- * Board oscillators-related settings.
- */
-#if !defined(STM32_LSECLK)
-#    define STM32_LSECLK 32768U
-#endif
-
-#if !defined(STM32_HSECLK)
-#    define STM32_HSECLK 25000000U
-#endif
-
-//#define STM32_HSE_BYPASS
-
-/*
- * Board voltages.
- * Required for performance limits calculation.
- */
-#define STM32_VDD 300U
-
-/*
- * MCU type as defined in the ST header.
- */
-#define STM32F411xE
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_ARD_A0 0U
-#define GPIOA_ADC1_IN0 0U
-#define GPIOA_ARD_A1 1U
-#define GPIOA_ADC1_IN1 1U
-#define GPIOA_ARD_D1 2U
-#define GPIOA_USART2_TX 2U
-#define GPIOA_ARD_D0 3U
-#define GPIOA_USART2_RX 3U
-#define GPIOA_ARD_A2 4U
-#define GPIOA_ADC1_IN4 4U
-#define GPIOA_LED_GREEN 5U
-#define GPIOA_ARD_D13 5U
-#define GPIOA_ARD_D12 6U
-#define GPIOA_ARD_D11 7U
-#define GPIOA_ARD_D7 8U
-#define GPIOA_ARD_D8 9U
-#define GPIOA_ARD_D2 10U
-#define GPIOA_OTG_FS_DM 11U
-#define GPIOA_OTG_FS_DP 12U
-#define GPIOA_SWDIO 13U
-#define GPIOA_SWCLK 14U
-#define GPIOA_PIN15 15U
-
-#define GPIOB_ARD_A3 0U
-#define GPIOB_ADC1_IN8 0U
-#define GPIOB_PIN1 1U
-#define GPIOB_PIN2 2U
-#define GPIOB_SWO 3U
-#define GPIOB_ARD_D3 3U
-#define GPIOB_ARD_D5 4U
-#define GPIOB_ARD_D4 5U
-#define GPIOB_ARD_D10 6U
-#define GPIOB_PIN7 7U
-#define GPIOB_ARD_D15 8U
-#define GPIOB_ARD_D14 9U
-#define GPIOB_ARD_D6 10U
-#define GPIOB_PIN11 11U
-#define GPIOB_PIN12 12U
-#define GPIOB_PIN13 13U
-#define GPIOB_PIN14 14U
-#define GPIOB_PIN15 15U
-
-#define GPIOC_ARD_A5 0U
-#define GPIOC_ADC1_IN10 0U
-#define GPIOC_ARD_A4 1U
-#define GPIOC_ADC1_IN11 1U
-#define GPIOC_PIN2 2U
-#define GPIOC_PIN3 3U
-#define GPIOC_PIN4 4U
-#define GPIOC_PIN5 5U
-#define GPIOC_PIN6 6U
-#define GPIOC_ARD_D9 7U
-#define GPIOC_PIN8 8U
-#define GPIOC_PIN9 9U
-#define GPIOC_PIN10 10U
-#define GPIOC_PIN11 11U
-#define GPIOC_PIN12 12U
-#define GPIOC_BUTTON 13U
-#define GPIOC_OSC32_IN 14U
-#define GPIOC_OSC32_OUT 15U
-
-#define GPIOD_PIN0 0U
-#define GPIOD_PIN1 1U
-#define GPIOD_PIN2 2U
-#define GPIOD_PIN3 3U
-#define GPIOD_PIN4 4U
-#define GPIOD_PIN5 5U
-#define GPIOD_PIN6 6U
-#define GPIOD_PIN7 7U
-#define GPIOD_PIN8 8U
-#define GPIOD_PIN9 9U
-#define GPIOD_PIN10 10U
-#define GPIOD_PIN11 11U
-#define GPIOD_PIN12 12U
-#define GPIOD_PIN13 13U
-#define GPIOD_PIN14 14U
-#define GPIOD_PIN15 15U
-
-#define GPIOE_PIN0 0U
-#define GPIOE_PIN1 1U
-#define GPIOE_PIN2 2U
-#define GPIOE_PIN3 3U
-#define GPIOE_PIN4 4U
-#define GPIOE_PIN5 5U
-#define GPIOE_PIN6 6U
-#define GPIOE_PIN7 7U
-#define GPIOE_PIN8 8U
-#define GPIOE_PIN9 9U
-#define GPIOE_PIN10 10U
-#define GPIOE_PIN11 11U
-#define GPIOE_PIN12 12U
-#define GPIOE_PIN13 13U
-#define GPIOE_PIN14 14U
-#define GPIOE_PIN15 15U
-
-#define GPIOF_PIN0 0U
-#define GPIOF_PIN1 1U
-#define GPIOF_PIN2 2U
-#define GPIOF_PIN3 3U
-#define GPIOF_PIN4 4U
-#define GPIOF_PIN5 5U
-#define GPIOF_PIN6 6U
-#define GPIOF_PIN7 7U
-#define GPIOF_PIN8 8U
-#define GPIOF_PIN9 9U
-#define GPIOF_PIN10 10U
-#define GPIOF_PIN11 11U
-#define GPIOF_PIN12 12U
-#define GPIOF_PIN13 13U
-#define GPIOF_PIN14 14U
-#define GPIOF_PIN15 15U
-
-#define GPIOG_PIN0 0U
-#define GPIOG_PIN1 1U
-#define GPIOG_PIN2 2U
-#define GPIOG_PIN3 3U
-#define GPIOG_PIN4 4U
-#define GPIOG_PIN5 5U
-#define GPIOG_PIN6 6U
-#define GPIOG_PIN7 7U
-#define GPIOG_PIN8 8U
-#define GPIOG_PIN9 9U
-#define GPIOG_PIN10 10U
-#define GPIOG_PIN11 11U
-#define GPIOG_PIN12 12U
-#define GPIOG_PIN13 13U
-#define GPIOG_PIN14 14U
-#define GPIOG_PIN15 15U
-
-#define GPIOH_OSC_IN 0U
-#define GPIOH_OSC_OUT 1U
-#define GPIOH_PIN2 2U
-#define GPIOH_PIN3 3U
-#define GPIOH_PIN4 4U
-#define GPIOH_PIN5 5U
-#define GPIOH_PIN6 6U
-#define GPIOH_PIN7 7U
-#define GPIOH_PIN8 8U
-#define GPIOH_PIN9 9U
-#define GPIOH_PIN10 10U
-#define GPIOH_PIN11 11U
-#define GPIOH_PIN12 12U
-#define GPIOH_PIN13 13U
-#define GPIOH_PIN14 14U
-#define GPIOH_PIN15 15U
-
-#define GPIOI_PIN0 0U
-#define GPIOI_PIN1 1U
-#define GPIOI_PIN2 2U
-#define GPIOI_PIN3 3U
-#define GPIOI_PIN4 4U
-#define GPIOI_PIN5 5U
-#define GPIOI_PIN6 6U
-#define GPIOI_PIN7 7U
-#define GPIOI_PIN8 8U
-#define GPIOI_PIN9 9U
-#define GPIOI_PIN10 10U
-#define GPIOI_PIN11 11U
-#define GPIOI_PIN12 12U
-#define GPIOI_PIN13 13U
-#define GPIOI_PIN14 14U
-#define GPIOI_PIN15 15U
-
-/*
- * IO lines assignments.
- */
-#define LINE_ARD_A0 PAL_LINE(GPIOA, 0U)
-#define LINE_ADC1_IN0 PAL_LINE(GPIOA, 0U)
-#define LINE_ARD_A1 PAL_LINE(GPIOA, 1U)
-#define LINE_ADC1_IN1 PAL_LINE(GPIOA, 1U)
-#define LINE_ARD_D1 PAL_LINE(GPIOA, 2U)
-#define LINE_USART2_TX PAL_LINE(GPIOA, 2U)
-#define LINE_ARD_D0 PAL_LINE(GPIOA, 3U)
-#define LINE_USART2_RX PAL_LINE(GPIOA, 3U)
-#define LINE_ARD_A2 PAL_LINE(GPIOA, 4U)
-#define LINE_ADC1_IN4 PAL_LINE(GPIOA, 4U)
-#define LINE_LED_GREEN PAL_LINE(GPIOA, 5U)
-#define LINE_ARD_D13 PAL_LINE(GPIOA, 5U)
-#define LINE_ARD_D12 PAL_LINE(GPIOA, 6U)
-#define LINE_ARD_D11 PAL_LINE(GPIOA, 7U)
-#define LINE_ARD_D7 PAL_LINE(GPIOA, 8U)
-#define LINE_ARD_D8 PAL_LINE(GPIOA, 9U)
-#define LINE_ARD_D2 PAL_LINE(GPIOA, 10U)
-#define LINE_OTG_FS_DM PAL_LINE(GPIOA, 11U)
-#define LINE_OTG_FS_DP PAL_LINE(GPIOA, 12U)
-#define LINE_SWDIO PAL_LINE(GPIOA, 13U)
-#define LINE_SWCLK PAL_LINE(GPIOA, 14U)
-#define LINE_ARD_A3 PAL_LINE(GPIOB, 0U)
-#define LINE_ADC1_IN8 PAL_LINE(GPIOB, 0U)
-#define LINE_SWO PAL_LINE(GPIOB, 3U)
-#define LINE_ARD_D3 PAL_LINE(GPIOB, 3U)
-#define LINE_ARD_D5 PAL_LINE(GPIOB, 4U)
-#define LINE_ARD_D4 PAL_LINE(GPIOB, 5U)
-#define LINE_ARD_D10 PAL_LINE(GPIOB, 6U)
-#define LINE_ARD_D15 PAL_LINE(GPIOB, 8U)
-#define LINE_ARD_D14 PAL_LINE(GPIOB, 9U)
-#define LINE_ARD_D6 PAL_LINE(GPIOB, 10U)
-#define LINE_ARD_A5 PAL_LINE(GPIOC, 0U)
-#define LINE_ADC1_IN10 PAL_LINE(GPIOC, 0U)
-#define LINE_ARD_A4 PAL_LINE(GPIOC, 1U)
-#define LINE_ADC1_IN11 PAL_LINE(GPIOC, 1U)
-#define LINE_ARD_D9 PAL_LINE(GPIOC, 7U)
-#define LINE_BUTTON PAL_LINE(GPIOC, 13U)
-#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U)
-#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U)
-#define LINE_OSC_IN PAL_LINE(GPIOH, 0U)
-#define LINE_OSC_OUT PAL_LINE(GPIOH, 1U)
-
-/*===========================================================================*/
-/* Driver pre-compile time settings.                                         */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Derived constants and error checks.                                       */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver data structures and types.                                         */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver macros.                                                            */
-/*===========================================================================*/
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the STM32 Reference Manual for details.
- */
-#define PIN_MODE_INPUT(n) (0U << ((n)*2U))
-#define PIN_MODE_OUTPUT(n) (1U << ((n)*2U))
-#define PIN_MODE_ALTERNATE(n) (2U << ((n)*2U))
-#define PIN_MODE_ANALOG(n) (3U << ((n)*2U))
-#define PIN_ODR_LOW(n) (0U << (n))
-#define PIN_ODR_HIGH(n) (1U << (n))
-#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
-#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
-#define PIN_OSPEED_VERYLOW(n) (0U << ((n)*2U))
-#define PIN_OSPEED_LOW(n) (1U << ((n)*2U))
-#define PIN_OSPEED_MEDIUM(n) (2U << ((n)*2U))
-#define PIN_OSPEED_HIGH(n) (3U << ((n)*2U))
-#define PIN_PUPDR_FLOATING(n) (0U << ((n)*2U))
-#define PIN_PUPDR_PULLUP(n) (1U << ((n)*2U))
-#define PIN_PUPDR_PULLDOWN(n) (2U << ((n)*2U))
-#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U))
-
-/*
- * GPIOA setup:
- *
- * PA0  - ARD_A0 ADC1_IN0           (input pullup).
- * PA1  - ARD_A1 ADC1_IN1           (input pullup).
- * PA2  - ARD_D1 USART2_TX          (alternate 7).
- * PA3  - ARD_D0 USART2_RX          (alternate 7).
- * PA4  - ARD_A2 ADC1_IN4           (input pullup).
- * PA5  - LED_GREEN ARD_D13         (output pushpull high).
- * PA6  - ARD_D12                   (input pullup).
- * PA7  - ARD_D11                   (input pullup).
- * PA8  - ARD_D7                    (input pullup).
- * PA9  - ARD_D8                    (input pullup).
- * PA10 - ARD_D2                    (input pullup).
- * PA11 - OTG_FS_DM                 (alternate 10).
- * PA12 - OTG_FS_DP                 (alternate 10).
- * PA13 - SWDIO                     (alternate 0).
- * PA14 - SWCLK                     (alternate 0).
- * PA15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_ARD_A0) | PIN_MODE_INPUT(GPIOA_ARD_A1) | PIN_MODE_ALTERNATE(GPIOA_ARD_D1) | PIN_MODE_ALTERNATE(GPIOA_ARD_D0) | PIN_MODE_INPUT(GPIOA_ARD_A2) | PIN_MODE_OUTPUT(GPIOA_LED_GREEN) | PIN_MODE_INPUT(GPIOA_ARD_D12) | PIN_MODE_INPUT(GPIOA_ARD_D11) | PIN_MODE_INPUT(GPIOA_ARD_D7) | PIN_MODE_INPUT(GPIOA_ARD_D8) | PIN_MODE_INPUT(GPIOA_ARD_D2) | PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DM) | PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DP) | PIN_MODE_ALTERNATE(GPIOA_SWDIO) | PIN_MODE_ALTERNATE(GPIOA_SWCLK) | PIN_MODE_INPUT(GPIOA_PIN15))
-#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_ARD_A0) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_A1) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_D1) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_D0) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_A2) | PIN_OTYPE_PUSHPULL(GPIOA_LED_GREEN) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_D12) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_D11) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_D7) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_D8) | PIN_OTYPE_PUSHPULL(GPIOA_ARD_D2) | PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DM) | PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DP) | PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
-#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_HIGH(GPIOA_ARD_A0) | PIN_OSPEED_HIGH(GPIOA_ARD_A1) | PIN_OSPEED_MEDIUM(GPIOA_ARD_D1) | PIN_OSPEED_MEDIUM(GPIOA_ARD_D0) | PIN_OSPEED_HIGH(GPIOA_ARD_A2) | PIN_OSPEED_MEDIUM(GPIOA_LED_GREEN) | PIN_OSPEED_HIGH(GPIOA_ARD_D12) | PIN_OSPEED_HIGH(GPIOA_ARD_D11) | PIN_OSPEED_HIGH(GPIOA_ARD_D7) | PIN_OSPEED_HIGH(GPIOA_ARD_D8) | PIN_OSPEED_HIGH(GPIOA_ARD_D2) | PIN_OSPEED_HIGH(GPIOA_OTG_FS_DM) | PIN_OSPEED_HIGH(GPIOA_OTG_FS_DP) | PIN_OSPEED_HIGH(GPIOA_SWDIO) | PIN_OSPEED_HIGH(GPIOA_SWCLK) | PIN_OSPEED_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR (PIN_PUPDR_PULLUP(GPIOA_ARD_A0) | PIN_PUPDR_PULLUP(GPIOA_ARD_A1) | PIN_PUPDR_FLOATING(GPIOA_ARD_D1) | PIN_PUPDR_FLOATING(GPIOA_ARD_D0) | PIN_PUPDR_PULLUP(GPIOA_ARD_A2) | PIN_PUPDR_FLOATING(GPIOA_LED_GREEN) | PIN_PUPDR_PULLUP(GPIOA_ARD_D12) | PIN_PUPDR_PULLUP(GPIOA_ARD_D11) | PIN_PUPDR_PULLUP(GPIOA_ARD_D7) | PIN_PUPDR_PULLUP(GPIOA_ARD_D8) | PIN_PUPDR_PULLUP(GPIOA_ARD_D2) | PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DM) | PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DP) | PIN_PUPDR_PULLUP(GPIOA_SWDIO) | PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | PIN_PUPDR_PULLUP(GPIOA_PIN15))
-#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_ARD_A0) | PIN_ODR_HIGH(GPIOA_ARD_A1) | PIN_ODR_HIGH(GPIOA_ARD_D1) | PIN_ODR_HIGH(GPIOA_ARD_D0) | PIN_ODR_HIGH(GPIOA_ARD_A2) | PIN_ODR_LOW(GPIOA_LED_GREEN) | PIN_ODR_HIGH(GPIOA_ARD_D12) | PIN_ODR_HIGH(GPIOA_ARD_D11) | PIN_ODR_HIGH(GPIOA_ARD_D7) | PIN_ODR_HIGH(GPIOA_ARD_D8) | PIN_ODR_HIGH(GPIOA_ARD_D2) | PIN_ODR_HIGH(GPIOA_OTG_FS_DM) | PIN_ODR_HIGH(GPIOA_OTG_FS_DP) | PIN_ODR_HIGH(GPIOA_SWDIO) | PIN_ODR_HIGH(GPIOA_SWCLK) | PIN_ODR_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_ARD_A0, 0U) | PIN_AFIO_AF(GPIOA_ARD_A1, 0U) | PIN_AFIO_AF(GPIOA_ARD_D1, 7U) | PIN_AFIO_AF(GPIOA_ARD_D0, 7U) | PIN_AFIO_AF(GPIOA_ARD_A2, 0U) | PIN_AFIO_AF(GPIOA_LED_GREEN, 0U) | PIN_AFIO_AF(GPIOA_ARD_D12, 0U) | PIN_AFIO_AF(GPIOA_ARD_D11, 0U))
-#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_ARD_D7, 0U) | PIN_AFIO_AF(GPIOA_ARD_D8, 0U) | PIN_AFIO_AF(GPIOA_ARD_D2, 0U) | PIN_AFIO_AF(GPIOA_OTG_FS_DM, 10U) | PIN_AFIO_AF(GPIOA_OTG_FS_DP, 10U) | PIN_AFIO_AF(GPIOA_SWDIO, 0U) | PIN_AFIO_AF(GPIOA_SWCLK, 0U) | PIN_AFIO_AF(GPIOA_PIN15, 0U))
-
-/*
- * GPIOB setup:
- *
- * PB0  - ARD_A3 ADC1_IN8           (input pullup).
- * PB1  - PIN1                      (input pullup).
- * PB2  - PIN2                      (input pullup).
- * PB3  - SWO ARD_D3                (alternate 0).
- * PB4  - ARD_D5                    (input pullup).
- * PB5  - ARD_D4                    (input pullup).
- * PB6  - ARD_D10                   (input pullup).
- * PB7  - PIN7                      (input pullup).
- * PB8  - ARD_D15                   (input pullup).
- * PB9  - ARD_D14                   (input pullup).
- * PB10 - ARD_D6                    (input pullup).
- * PB11 - PIN11                     (input pullup).
- * PB12 - PIN12                     (input pullup).
- * PB13 - PIN13                     (input pullup).
- * PB14 - PIN14                     (input pullup).
- * PB15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_ARD_A3) | PIN_MODE_INPUT(GPIOB_PIN1) | PIN_MODE_INPUT(GPIOB_PIN2) | PIN_MODE_ALTERNATE(GPIOB_SWO) | PIN_MODE_INPUT(GPIOB_ARD_D5) | PIN_MODE_INPUT(GPIOB_ARD_D4) | PIN_MODE_INPUT(GPIOB_ARD_D10) | PIN_MODE_INPUT(GPIOB_PIN7) | PIN_MODE_INPUT(GPIOB_ARD_D15) | PIN_MODE_INPUT(GPIOB_ARD_D14) | PIN_MODE_INPUT(GPIOB_ARD_D6) | PIN_MODE_INPUT(GPIOB_PIN11) | PIN_MODE_INPUT(GPIOB_PIN12) | PIN_MODE_INPUT(GPIOB_PIN13) | PIN_MODE_INPUT(GPIOB_PIN14) | PIN_MODE_INPUT(GPIOB_PIN15))
-#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_ARD_A3) | PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | PIN_OTYPE_PUSHPULL(GPIOB_SWO) | PIN_OTYPE_PUSHPULL(GPIOB_ARD_D5) | PIN_OTYPE_PUSHPULL(GPIOB_ARD_D4) | PIN_OTYPE_PUSHPULL(GPIOB_ARD_D10) | PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | PIN_OTYPE_PUSHPULL(GPIOB_ARD_D15) | PIN_OTYPE_PUSHPULL(GPIOB_ARD_D14) | PIN_OTYPE_PUSHPULL(GPIOB_ARD_D6) | PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | PIN_OTYPE_PUSHPULL(GPIOB_PIN15))
-#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_HIGH(GPIOB_ARD_A3) | PIN_OSPEED_HIGH(GPIOB_PIN1) | PIN_OSPEED_HIGH(GPIOB_PIN2) | PIN_OSPEED_HIGH(GPIOB_SWO) | PIN_OSPEED_HIGH(GPIOB_ARD_D5) | PIN_OSPEED_HIGH(GPIOB_ARD_D4) | PIN_OSPEED_HIGH(GPIOB_ARD_D10) | PIN_OSPEED_HIGH(GPIOB_PIN7) | PIN_OSPEED_HIGH(GPIOB_ARD_D15) | PIN_OSPEED_HIGH(GPIOB_ARD_D14) | PIN_OSPEED_HIGH(GPIOB_ARD_D6) | PIN_OSPEED_HIGH(GPIOB_PIN11) | PIN_OSPEED_HIGH(GPIOB_PIN12) | PIN_OSPEED_HIGH(GPIOB_PIN13) | PIN_OSPEED_HIGH(GPIOB_PIN14) | PIN_OSPEED_HIGH(GPIOB_PIN15))
-#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_ARD_A3) | PIN_PUPDR_PULLUP(GPIOB_PIN1) | PIN_PUPDR_PULLUP(GPIOB_PIN2) | PIN_PUPDR_PULLUP(GPIOB_SWO) | PIN_PUPDR_PULLUP(GPIOB_ARD_D5) | PIN_PUPDR_PULLUP(GPIOB_ARD_D4) | PIN_PUPDR_PULLUP(GPIOB_ARD_D10) | PIN_PUPDR_PULLUP(GPIOB_PIN7) | PIN_PUPDR_PULLUP(GPIOB_ARD_D15) | PIN_PUPDR_PULLUP(GPIOB_ARD_D14) | PIN_PUPDR_PULLUP(GPIOB_ARD_D6) | PIN_PUPDR_PULLUP(GPIOB_PIN11) | PIN_PUPDR_PULLUP(GPIOB_PIN12) | PIN_PUPDR_PULLUP(GPIOB_PIN13) | PIN_PUPDR_PULLUP(GPIOB_PIN14) | PIN_PUPDR_PULLUP(GPIOB_PIN15))
-#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_ARD_A3) | PIN_ODR_HIGH(GPIOB_PIN1) | PIN_ODR_HIGH(GPIOB_PIN2) | PIN_ODR_HIGH(GPIOB_SWO) | PIN_ODR_HIGH(GPIOB_ARD_D5) | PIN_ODR_HIGH(GPIOB_ARD_D4) | PIN_ODR_HIGH(GPIOB_ARD_D10) | PIN_ODR_HIGH(GPIOB_PIN7) | PIN_ODR_HIGH(GPIOB_ARD_D15) | PIN_ODR_HIGH(GPIOB_ARD_D14) | PIN_ODR_HIGH(GPIOB_ARD_D6) | PIN_ODR_HIGH(GPIOB_PIN11) | PIN_ODR_HIGH(GPIOB_PIN12) | PIN_ODR_HIGH(GPIOB_PIN13) | PIN_ODR_HIGH(GPIOB_PIN14) | PIN_ODR_HIGH(GPIOB_PIN15))
-#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_ARD_A3, 0U) | PIN_AFIO_AF(GPIOB_PIN1, 0U) | PIN_AFIO_AF(GPIOB_PIN2, 0U) | PIN_AFIO_AF(GPIOB_SWO, 0U) | PIN_AFIO_AF(GPIOB_ARD_D5, 0U) | PIN_AFIO_AF(GPIOB_ARD_D4, 0U) | PIN_AFIO_AF(GPIOB_ARD_D10, 0U) | PIN_AFIO_AF(GPIOB_PIN7, 0U))
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 0U) | PIN_AFIO_AF(GPIOB_ARD_D14, 0U) | PIN_AFIO_AF(GPIOB_ARD_D6, 0U) | PIN_AFIO_AF(GPIOB_PIN11, 0U) | PIN_AFIO_AF(GPIOB_PIN12, 0U) | PIN_AFIO_AF(GPIOB_PIN13, 0U) | PIN_AFIO_AF(GPIOB_PIN14, 0U) | PIN_AFIO_AF(GPIOB_PIN15, 0U))
-
-/*
- * GPIOC setup:
- *
- * PC0  - ARD_A5 ADC1_IN10          (input pullup).
- * PC1  - ARD_A4 ADC1_IN11          (input pullup).
- * PC2  - PIN2                      (input pullup).
- * PC3  - PIN3                      (input pullup).
- * PC4  - PIN4                      (input pullup).
- * PC5  - PIN5                      (input pullup).
- * PC6  - PIN6                      (input pullup).
- * PC7  - ARD_D9                    (input pullup).
- * PC8  - PIN8                      (input pullup).
- * PC9  - PIN9                      (input pullup).
- * PC10 - PIN10                     (input pullup).
- * PC11 - PIN11                     (input pullup).
- * PC12 - PIN12                     (input pullup).
- * PC13 - BUTTON                    (input floating).
- * PC14 - OSC32_IN                  (input floating).
- * PC15 - OSC32_OUT                 (input floating).
- */
-#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_ARD_A5) | PIN_MODE_INPUT(GPIOC_ARD_A4) | PIN_MODE_INPUT(GPIOC_PIN2) | PIN_MODE_INPUT(GPIOC_PIN3) | PIN_MODE_INPUT(GPIOC_PIN4) | PIN_MODE_INPUT(GPIOC_PIN5) | PIN_MODE_INPUT(GPIOC_PIN6) | PIN_MODE_INPUT(GPIOC_ARD_D9) | PIN_MODE_INPUT(GPIOC_PIN8) | PIN_MODE_INPUT(GPIOC_PIN9) | PIN_MODE_INPUT(GPIOC_PIN10) | PIN_MODE_INPUT(GPIOC_PIN11) | PIN_MODE_INPUT(GPIOC_PIN12) | PIN_MODE_INPUT(GPIOC_BUTTON) | PIN_MODE_INPUT(GPIOC_OSC32_IN) | PIN_MODE_INPUT(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_ARD_A5) | PIN_OTYPE_PUSHPULL(GPIOC_ARD_A4) | PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | PIN_OTYPE_PUSHPULL(GPIOC_ARD_D9) | PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | PIN_OTYPE_PUSHPULL(GPIOC_BUTTON) | PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_ARD_A5) | PIN_OSPEED_HIGH(GPIOC_ARD_A4) | PIN_OSPEED_HIGH(GPIOC_PIN2) | PIN_OSPEED_HIGH(GPIOC_PIN3) | PIN_OSPEED_HIGH(GPIOC_PIN4) | PIN_OSPEED_HIGH(GPIOC_PIN5) | PIN_OSPEED_HIGH(GPIOC_PIN6) | PIN_OSPEED_HIGH(GPIOC_ARD_D9) | PIN_OSPEED_HIGH(GPIOC_PIN8) | PIN_OSPEED_HIGH(GPIOC_PIN9) | PIN_OSPEED_HIGH(GPIOC_PIN10) | PIN_OSPEED_HIGH(GPIOC_PIN11) | PIN_OSPEED_HIGH(GPIOC_PIN12) | PIN_OSPEED_HIGH(GPIOC_BUTTON) | PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_ARD_A5) | PIN_PUPDR_PULLUP(GPIOC_ARD_A4) | PIN_PUPDR_PULLUP(GPIOC_PIN2) | PIN_PUPDR_PULLUP(GPIOC_PIN3) | PIN_PUPDR_PULLUP(GPIOC_PIN4) | PIN_PUPDR_PULLUP(GPIOC_PIN5) | PIN_PUPDR_PULLUP(GPIOC_PIN6) | PIN_PUPDR_PULLUP(GPIOC_ARD_D9) | PIN_PUPDR_PULLUP(GPIOC_PIN8) | PIN_PUPDR_PULLUP(GPIOC_PIN9) | PIN_PUPDR_PULLUP(GPIOC_PIN10) | PIN_PUPDR_PULLUP(GPIOC_PIN11) | PIN_PUPDR_PULLUP(GPIOC_PIN12) | PIN_PUPDR_FLOATING(GPIOC_BUTTON) | PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_ARD_A5) | PIN_ODR_HIGH(GPIOC_ARD_A4) | PIN_ODR_HIGH(GPIOC_PIN2) | PIN_ODR_HIGH(GPIOC_PIN3) | PIN_ODR_HIGH(GPIOC_PIN4) | PIN_ODR_HIGH(GPIOC_PIN5) | PIN_ODR_HIGH(GPIOC_PIN6) | PIN_ODR_HIGH(GPIOC_ARD_D9) | PIN_ODR_HIGH(GPIOC_PIN8) | PIN_ODR_HIGH(GPIOC_PIN9) | PIN_ODR_HIGH(GPIOC_PIN10) | PIN_ODR_HIGH(GPIOC_PIN11) | PIN_ODR_HIGH(GPIOC_PIN12) | PIN_ODR_HIGH(GPIOC_BUTTON) | PIN_ODR_HIGH(GPIOC_OSC32_IN) | PIN_ODR_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_ARD_A5, 0U) | PIN_AFIO_AF(GPIOC_ARD_A4, 0U) | PIN_AFIO_AF(GPIOC_PIN2, 0U) | PIN_AFIO_AF(GPIOC_PIN3, 0U) | PIN_AFIO_AF(GPIOC_PIN4, 0U) | PIN_AFIO_AF(GPIOC_PIN5, 0U) | PIN_AFIO_AF(GPIOC_PIN6, 0U) | PIN_AFIO_AF(GPIOC_ARD_D9, 0U))
-#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0U) | PIN_AFIO_AF(GPIOC_PIN9, 0U) | PIN_AFIO_AF(GPIOC_PIN10, 0U) | PIN_AFIO_AF(GPIOC_PIN11, 0U) | PIN_AFIO_AF(GPIOC_PIN12, 0U) | PIN_AFIO_AF(GPIOC_BUTTON, 0U) | PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
-
-/*
- * GPIOD setup:
- *
- * PD0  - PIN0                      (input pullup).
- * PD1  - PIN1                      (input pullup).
- * PD2  - PIN2                      (input pullup).
- * PD3  - PIN3                      (input pullup).
- * PD4  - PIN4                      (input pullup).
- * PD5  - PIN5                      (input pullup).
- * PD6  - PIN6                      (input pullup).
- * PD7  - PIN7                      (input pullup).
- * PD8  - PIN8                      (input pullup).
- * PD9  - PIN9                      (input pullup).
- * PD10 - PIN10                     (input pullup).
- * PD11 - PIN11                     (input pullup).
- * PD12 - PIN12                     (input pullup).
- * PD13 - PIN13                     (input pullup).
- * PD14 - PIN14                     (input pullup).
- * PD15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | PIN_MODE_INPUT(GPIOD_PIN1) | PIN_MODE_INPUT(GPIOD_PIN2) | PIN_MODE_INPUT(GPIOD_PIN3) | PIN_MODE_INPUT(GPIOD_PIN4) | PIN_MODE_INPUT(GPIOD_PIN5) | PIN_MODE_INPUT(GPIOD_PIN6) | PIN_MODE_INPUT(GPIOD_PIN7) | PIN_MODE_INPUT(GPIOD_PIN8) | PIN_MODE_INPUT(GPIOD_PIN9) | PIN_MODE_INPUT(GPIOD_PIN10) | PIN_MODE_INPUT(GPIOD_PIN11) | PIN_MODE_INPUT(GPIOD_PIN12) | PIN_MODE_INPUT(GPIOD_PIN13) | PIN_MODE_INPUT(GPIOD_PIN14) | PIN_MODE_INPUT(GPIOD_PIN15))
-#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
-#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_HIGH(GPIOD_PIN0) | PIN_OSPEED_HIGH(GPIOD_PIN1) | PIN_OSPEED_HIGH(GPIOD_PIN2) | PIN_OSPEED_HIGH(GPIOD_PIN3) | PIN_OSPEED_HIGH(GPIOD_PIN4) | PIN_OSPEED_HIGH(GPIOD_PIN5) | PIN_OSPEED_HIGH(GPIOD_PIN6) | PIN_OSPEED_HIGH(GPIOD_PIN7) | PIN_OSPEED_HIGH(GPIOD_PIN8) | PIN_OSPEED_HIGH(GPIOD_PIN9) | PIN_OSPEED_HIGH(GPIOD_PIN10) | PIN_OSPEED_HIGH(GPIOD_PIN11) | PIN_OSPEED_HIGH(GPIOD_PIN12) | PIN_OSPEED_HIGH(GPIOD_PIN13) | PIN_OSPEED_HIGH(GPIOD_PIN14) | PIN_OSPEED_HIGH(GPIOD_PIN15))
-#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | PIN_PUPDR_PULLUP(GPIOD_PIN1) | PIN_PUPDR_PULLUP(GPIOD_PIN2) | PIN_PUPDR_PULLUP(GPIOD_PIN3) | PIN_PUPDR_PULLUP(GPIOD_PIN4) | PIN_PUPDR_PULLUP(GPIOD_PIN5) | PIN_PUPDR_PULLUP(GPIOD_PIN6) | PIN_PUPDR_PULLUP(GPIOD_PIN7) | PIN_PUPDR_PULLUP(GPIOD_PIN8) | PIN_PUPDR_PULLUP(GPIOD_PIN9) | PIN_PUPDR_PULLUP(GPIOD_PIN10) | PIN_PUPDR_PULLUP(GPIOD_PIN11) | PIN_PUPDR_PULLUP(GPIOD_PIN12) | PIN_PUPDR_PULLUP(GPIOD_PIN13) | PIN_PUPDR_PULLUP(GPIOD_PIN14) | PIN_PUPDR_PULLUP(GPIOD_PIN15))
-#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | PIN_ODR_HIGH(GPIOD_PIN1) | PIN_ODR_HIGH(GPIOD_PIN2) | PIN_ODR_HIGH(GPIOD_PIN3) | PIN_ODR_HIGH(GPIOD_PIN4) | PIN_ODR_HIGH(GPIOD_PIN5) | PIN_ODR_HIGH(GPIOD_PIN6) | PIN_ODR_HIGH(GPIOD_PIN7) | PIN_ODR_HIGH(GPIOD_PIN8) | PIN_ODR_HIGH(GPIOD_PIN9) | PIN_ODR_HIGH(GPIOD_PIN10) | PIN_ODR_HIGH(GPIOD_PIN11) | PIN_ODR_HIGH(GPIOD_PIN12) | PIN_ODR_HIGH(GPIOD_PIN13) | PIN_ODR_HIGH(GPIOD_PIN14) | PIN_ODR_HIGH(GPIOD_PIN15))
-#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | PIN_AFIO_AF(GPIOD_PIN1, 0U) | PIN_AFIO_AF(GPIOD_PIN2, 0U) | PIN_AFIO_AF(GPIOD_PIN3, 0U) | PIN_AFIO_AF(GPIOD_PIN4, 0U) | PIN_AFIO_AF(GPIOD_PIN5, 0U) | PIN_AFIO_AF(GPIOD_PIN6, 0U) | PIN_AFIO_AF(GPIOD_PIN7, 0U))
-#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | PIN_AFIO_AF(GPIOD_PIN9, 0U) | PIN_AFIO_AF(GPIOD_PIN10, 0U) | PIN_AFIO_AF(GPIOD_PIN11, 0U) | PIN_AFIO_AF(GPIOD_PIN12, 0U) | PIN_AFIO_AF(GPIOD_PIN13, 0U) | PIN_AFIO_AF(GPIOD_PIN14, 0U) | PIN_AFIO_AF(GPIOD_PIN15, 0U))
-
-/*
- * GPIOE setup:
- *
- * PE0  - PIN0                      (input pullup).
- * PE1  - PIN1                      (input pullup).
- * PE2  - PIN2                      (input pullup).
- * PE3  - PIN3                      (input pullup).
- * PE4  - PIN4                      (input pullup).
- * PE5  - PIN5                      (input pullup).
- * PE6  - PIN6                      (input pullup).
- * PE7  - PIN7                      (input pullup).
- * PE8  - PIN8                      (input pullup).
- * PE9  - PIN9                      (input pullup).
- * PE10 - PIN10                     (input pullup).
- * PE11 - PIN11                     (input pullup).
- * PE12 - PIN12                     (input pullup).
- * PE13 - PIN13                     (input pullup).
- * PE14 - PIN14                     (input pullup).
- * PE15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | PIN_MODE_INPUT(GPIOE_PIN1) | PIN_MODE_INPUT(GPIOE_PIN2) | PIN_MODE_INPUT(GPIOE_PIN3) | PIN_MODE_INPUT(GPIOE_PIN4) | PIN_MODE_INPUT(GPIOE_PIN5) | PIN_MODE_INPUT(GPIOE_PIN6) | PIN_MODE_INPUT(GPIOE_PIN7) | PIN_MODE_INPUT(GPIOE_PIN8) | PIN_MODE_INPUT(GPIOE_PIN9) | PIN_MODE_INPUT(GPIOE_PIN10) | PIN_MODE_INPUT(GPIOE_PIN11) | PIN_MODE_INPUT(GPIOE_PIN12) | PIN_MODE_INPUT(GPIOE_PIN13) | PIN_MODE_INPUT(GPIOE_PIN14) | PIN_MODE_INPUT(GPIOE_PIN15))
-#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
-#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_HIGH(GPIOE_PIN0) | PIN_OSPEED_HIGH(GPIOE_PIN1) | PIN_OSPEED_HIGH(GPIOE_PIN2) | PIN_OSPEED_HIGH(GPIOE_PIN3) | PIN_OSPEED_HIGH(GPIOE_PIN4) | PIN_OSPEED_HIGH(GPIOE_PIN5) | PIN_OSPEED_HIGH(GPIOE_PIN6) | PIN_OSPEED_HIGH(GPIOE_PIN7) | PIN_OSPEED_HIGH(GPIOE_PIN8) | PIN_OSPEED_HIGH(GPIOE_PIN9) | PIN_OSPEED_HIGH(GPIOE_PIN10) | PIN_OSPEED_HIGH(GPIOE_PIN11) | PIN_OSPEED_HIGH(GPIOE_PIN12) | PIN_OSPEED_HIGH(GPIOE_PIN13) | PIN_OSPEED_HIGH(GPIOE_PIN14) | PIN_OSPEED_HIGH(GPIOE_PIN15))
-#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | PIN_PUPDR_PULLUP(GPIOE_PIN1) | PIN_PUPDR_PULLUP(GPIOE_PIN2) | PIN_PUPDR_PULLUP(GPIOE_PIN3) | PIN_PUPDR_PULLUP(GPIOE_PIN4) | PIN_PUPDR_PULLUP(GPIOE_PIN5) | PIN_PUPDR_PULLUP(GPIOE_PIN6) | PIN_PUPDR_PULLUP(GPIOE_PIN7) | PIN_PUPDR_PULLUP(GPIOE_PIN8) | PIN_PUPDR_PULLUP(GPIOE_PIN9) | PIN_PUPDR_PULLUP(GPIOE_PIN10) | PIN_PUPDR_PULLUP(GPIOE_PIN11) | PIN_PUPDR_PULLUP(GPIOE_PIN12) | PIN_PUPDR_PULLUP(GPIOE_PIN13) | PIN_PUPDR_PULLUP(GPIOE_PIN14) | PIN_PUPDR_PULLUP(GPIOE_PIN15))
-#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | PIN_ODR_HIGH(GPIOE_PIN1) | PIN_ODR_HIGH(GPIOE_PIN2) | PIN_ODR_HIGH(GPIOE_PIN3) | PIN_ODR_HIGH(GPIOE_PIN4) | PIN_ODR_HIGH(GPIOE_PIN5) | PIN_ODR_HIGH(GPIOE_PIN6) | PIN_ODR_HIGH(GPIOE_PIN7) | PIN_ODR_HIGH(GPIOE_PIN8) | PIN_ODR_HIGH(GPIOE_PIN9) | PIN_ODR_HIGH(GPIOE_PIN10) | PIN_ODR_HIGH(GPIOE_PIN11) | PIN_ODR_HIGH(GPIOE_PIN12) | PIN_ODR_HIGH(GPIOE_PIN13) | PIN_ODR_HIGH(GPIOE_PIN14) | PIN_ODR_HIGH(GPIOE_PIN15))
-#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | PIN_AFIO_AF(GPIOE_PIN1, 0U) | PIN_AFIO_AF(GPIOE_PIN2, 0U) | PIN_AFIO_AF(GPIOE_PIN3, 0U) | PIN_AFIO_AF(GPIOE_PIN4, 0U) | PIN_AFIO_AF(GPIOE_PIN5, 0U) | PIN_AFIO_AF(GPIOE_PIN6, 0U) | PIN_AFIO_AF(GPIOE_PIN7, 0U))
-#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | PIN_AFIO_AF(GPIOE_PIN9, 0U) | PIN_AFIO_AF(GPIOE_PIN10, 0U) | PIN_AFIO_AF(GPIOE_PIN11, 0U) | PIN_AFIO_AF(GPIOE_PIN12, 0U) | PIN_AFIO_AF(GPIOE_PIN13, 0U) | PIN_AFIO_AF(GPIOE_PIN14, 0U) | PIN_AFIO_AF(GPIOE_PIN15, 0U))
-
-/*
- * GPIOF setup:
- *
- * PF0  - PIN0                      (input pullup).
- * PF1  - PIN1                      (input pullup).
- * PF2  - PIN2                      (input pullup).
- * PF3  - PIN3                      (input pullup).
- * PF4  - PIN4                      (input pullup).
- * PF5  - PIN5                      (input pullup).
- * PF6  - PIN6                      (input pullup).
- * PF7  - PIN7                      (input pullup).
- * PF8  - PIN8                      (input pullup).
- * PF9  - PIN9                      (input pullup).
- * PF10 - PIN10                     (input pullup).
- * PF11 - PIN11                     (input pullup).
- * PF12 - PIN12                     (input pullup).
- * PF13 - PIN13                     (input pullup).
- * PF14 - PIN14                     (input pullup).
- * PF15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_PIN0) | PIN_MODE_INPUT(GPIOF_PIN1) | PIN_MODE_INPUT(GPIOF_PIN2) | PIN_MODE_INPUT(GPIOF_PIN3) | PIN_MODE_INPUT(GPIOF_PIN4) | PIN_MODE_INPUT(GPIOF_PIN5) | PIN_MODE_INPUT(GPIOF_PIN6) | PIN_MODE_INPUT(GPIOF_PIN7) | PIN_MODE_INPUT(GPIOF_PIN8) | PIN_MODE_INPUT(GPIOF_PIN9) | PIN_MODE_INPUT(GPIOF_PIN10) | PIN_MODE_INPUT(GPIOF_PIN11) | PIN_MODE_INPUT(GPIOF_PIN12) | PIN_MODE_INPUT(GPIOF_PIN13) | PIN_MODE_INPUT(GPIOF_PIN14) | PIN_MODE_INPUT(GPIOF_PIN15))
-#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_PIN0) | PIN_OTYPE_PUSHPULL(GPIOF_PIN1) | PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
-#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_HIGH(GPIOF_PIN0) | PIN_OSPEED_HIGH(GPIOF_PIN1) | PIN_OSPEED_HIGH(GPIOF_PIN2) | PIN_OSPEED_HIGH(GPIOF_PIN3) | PIN_OSPEED_HIGH(GPIOF_PIN4) | PIN_OSPEED_HIGH(GPIOF_PIN5) | PIN_OSPEED_HIGH(GPIOF_PIN6) | PIN_OSPEED_HIGH(GPIOF_PIN7) | PIN_OSPEED_HIGH(GPIOF_PIN8) | PIN_OSPEED_HIGH(GPIOF_PIN9) | PIN_OSPEED_HIGH(GPIOF_PIN10) | PIN_OSPEED_HIGH(GPIOF_PIN11) | PIN_OSPEED_HIGH(GPIOF_PIN12) | PIN_OSPEED_HIGH(GPIOF_PIN13) | PIN_OSPEED_HIGH(GPIOF_PIN14) | PIN_OSPEED_HIGH(GPIOF_PIN15))
-#define VAL_GPIOF_PUPDR (PIN_PUPDR_PULLUP(GPIOF_PIN0) | PIN_PUPDR_PULLUP(GPIOF_PIN1) | PIN_PUPDR_PULLUP(GPIOF_PIN2) | PIN_PUPDR_PULLUP(GPIOF_PIN3) | PIN_PUPDR_PULLUP(GPIOF_PIN4) | PIN_PUPDR_PULLUP(GPIOF_PIN5) | PIN_PUPDR_PULLUP(GPIOF_PIN6) | PIN_PUPDR_PULLUP(GPIOF_PIN7) | PIN_PUPDR_PULLUP(GPIOF_PIN8) | PIN_PUPDR_PULLUP(GPIOF_PIN9) | PIN_PUPDR_PULLUP(GPIOF_PIN10) | PIN_PUPDR_PULLUP(GPIOF_PIN11) | PIN_PUPDR_PULLUP(GPIOF_PIN12) | PIN_PUPDR_PULLUP(GPIOF_PIN13) | PIN_PUPDR_PULLUP(GPIOF_PIN14) | PIN_PUPDR_PULLUP(GPIOF_PIN15))
-#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_PIN0) | PIN_ODR_HIGH(GPIOF_PIN1) | PIN_ODR_HIGH(GPIOF_PIN2) | PIN_ODR_HIGH(GPIOF_PIN3) | PIN_ODR_HIGH(GPIOF_PIN4) | PIN_ODR_HIGH(GPIOF_PIN5) | PIN_ODR_HIGH(GPIOF_PIN6) | PIN_ODR_HIGH(GPIOF_PIN7) | PIN_ODR_HIGH(GPIOF_PIN8) | PIN_ODR_HIGH(GPIOF_PIN9) | PIN_ODR_HIGH(GPIOF_PIN10) | PIN_ODR_HIGH(GPIOF_PIN11) | PIN_ODR_HIGH(GPIOF_PIN12) | PIN_ODR_HIGH(GPIOF_PIN13) | PIN_ODR_HIGH(GPIOF_PIN14) | PIN_ODR_HIGH(GPIOF_PIN15))
-#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_PIN0, 0U) | PIN_AFIO_AF(GPIOF_PIN1, 0U) | PIN_AFIO_AF(GPIOF_PIN2, 0U) | PIN_AFIO_AF(GPIOF_PIN3, 0U) | PIN_AFIO_AF(GPIOF_PIN4, 0U) | PIN_AFIO_AF(GPIOF_PIN5, 0U) | PIN_AFIO_AF(GPIOF_PIN6, 0U) | PIN_AFIO_AF(GPIOF_PIN7, 0U))
-#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | PIN_AFIO_AF(GPIOF_PIN9, 0U) | PIN_AFIO_AF(GPIOF_PIN10, 0U) | PIN_AFIO_AF(GPIOF_PIN11, 0U) | PIN_AFIO_AF(GPIOF_PIN12, 0U) | PIN_AFIO_AF(GPIOF_PIN13, 0U) | PIN_AFIO_AF(GPIOF_PIN14, 0U) | PIN_AFIO_AF(GPIOF_PIN15, 0U))
-
-/*
- * GPIOG setup:
- *
- * PG0  - PIN0                      (input pullup).
- * PG1  - PIN1                      (input pullup).
- * PG2  - PIN2                      (input pullup).
- * PG3  - PIN3                      (input pullup).
- * PG4  - PIN4                      (input pullup).
- * PG5  - PIN5                      (input pullup).
- * PG6  - PIN6                      (input pullup).
- * PG7  - PIN7                      (input pullup).
- * PG8  - PIN8                      (input pullup).
- * PG9  - PIN9                      (input pullup).
- * PG10 - PIN10                     (input pullup).
- * PG11 - PIN11                     (input pullup).
- * PG12 - PIN12                     (input pullup).
- * PG13 - PIN13                     (input pullup).
- * PG14 - PIN14                     (input pullup).
- * PG15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_PIN0) | PIN_MODE_INPUT(GPIOG_PIN1) | PIN_MODE_INPUT(GPIOG_PIN2) | PIN_MODE_INPUT(GPIOG_PIN3) | PIN_MODE_INPUT(GPIOG_PIN4) | PIN_MODE_INPUT(GPIOG_PIN5) | PIN_MODE_INPUT(GPIOG_PIN6) | PIN_MODE_INPUT(GPIOG_PIN7) | PIN_MODE_INPUT(GPIOG_PIN8) | PIN_MODE_INPUT(GPIOG_PIN9) | PIN_MODE_INPUT(GPIOG_PIN10) | PIN_MODE_INPUT(GPIOG_PIN11) | PIN_MODE_INPUT(GPIOG_PIN12) | PIN_MODE_INPUT(GPIOG_PIN13) | PIN_MODE_INPUT(GPIOG_PIN14) | PIN_MODE_INPUT(GPIOG_PIN15))
-#define VAL_GPIOG_OTYPER (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) | PIN_OTYPE_PUSHPULL(GPIOG_PIN1) | PIN_OTYPE_PUSHPULL(GPIOG_PIN2) | PIN_OTYPE_PUSHPULL(GPIOG_PIN3) | PIN_OTYPE_PUSHPULL(GPIOG_PIN4) | PIN_OTYPE_PUSHPULL(GPIOG_PIN5) | PIN_OTYPE_PUSHPULL(GPIOG_PIN6) | PIN_OTYPE_PUSHPULL(GPIOG_PIN7) | PIN_OTYPE_PUSHPULL(GPIOG_PIN8) | PIN_OTYPE_PUSHPULL(GPIOG_PIN9) | PIN_OTYPE_PUSHPULL(GPIOG_PIN10) | PIN_OTYPE_PUSHPULL(GPIOG_PIN11) | PIN_OTYPE_PUSHPULL(GPIOG_PIN12) | PIN_OTYPE_PUSHPULL(GPIOG_PIN13) | PIN_OTYPE_PUSHPULL(GPIOG_PIN14) | PIN_OTYPE_PUSHPULL(GPIOG_PIN15))
-#define VAL_GPIOG_OSPEEDR (PIN_OSPEED_HIGH(GPIOG_PIN0) | PIN_OSPEED_HIGH(GPIOG_PIN1) | PIN_OSPEED_HIGH(GPIOG_PIN2) | PIN_OSPEED_HIGH(GPIOG_PIN3) | PIN_OSPEED_HIGH(GPIOG_PIN4) | PIN_OSPEED_HIGH(GPIOG_PIN5) | PIN_OSPEED_HIGH(GPIOG_PIN6) | PIN_OSPEED_HIGH(GPIOG_PIN7) | PIN_OSPEED_HIGH(GPIOG_PIN8) | PIN_OSPEED_HIGH(GPIOG_PIN9) | PIN_OSPEED_HIGH(GPIOG_PIN10) | PIN_OSPEED_HIGH(GPIOG_PIN11) | PIN_OSPEED_HIGH(GPIOG_PIN12) | PIN_OSPEED_HIGH(GPIOG_PIN13) | PIN_OSPEED_HIGH(GPIOG_PIN14) | PIN_OSPEED_HIGH(GPIOG_PIN15))
-#define VAL_GPIOG_PUPDR (PIN_PUPDR_PULLUP(GPIOG_PIN0) | PIN_PUPDR_PULLUP(GPIOG_PIN1) | PIN_PUPDR_PULLUP(GPIOG_PIN2) | PIN_PUPDR_PULLUP(GPIOG_PIN3) | PIN_PUPDR_PULLUP(GPIOG_PIN4) | PIN_PUPDR_PULLUP(GPIOG_PIN5) | PIN_PUPDR_PULLUP(GPIOG_PIN6) | PIN_PUPDR_PULLUP(GPIOG_PIN7) | PIN_PUPDR_PULLUP(GPIOG_PIN8) | PIN_PUPDR_PULLUP(GPIOG_PIN9) | PIN_PUPDR_PULLUP(GPIOG_PIN10) | PIN_PUPDR_PULLUP(GPIOG_PIN11) | PIN_PUPDR_PULLUP(GPIOG_PIN12) | PIN_PUPDR_PULLUP(GPIOG_PIN13) | PIN_PUPDR_PULLUP(GPIOG_PIN14) | PIN_PUPDR_PULLUP(GPIOG_PIN15))
-#define VAL_GPIOG_ODR (PIN_ODR_HIGH(GPIOG_PIN0) | PIN_ODR_HIGH(GPIOG_PIN1) | PIN_ODR_HIGH(GPIOG_PIN2) | PIN_ODR_HIGH(GPIOG_PIN3) | PIN_ODR_HIGH(GPIOG_PIN4) | PIN_ODR_HIGH(GPIOG_PIN5) | PIN_ODR_HIGH(GPIOG_PIN6) | PIN_ODR_HIGH(GPIOG_PIN7) | PIN_ODR_HIGH(GPIOG_PIN8) | PIN_ODR_HIGH(GPIOG_PIN9) | PIN_ODR_HIGH(GPIOG_PIN10) | PIN_ODR_HIGH(GPIOG_PIN11) | PIN_ODR_HIGH(GPIOG_PIN12) | PIN_ODR_HIGH(GPIOG_PIN13) | PIN_ODR_HIGH(GPIOG_PIN14) | PIN_ODR_HIGH(GPIOG_PIN15))
-#define VAL_GPIOG_AFRL (PIN_AFIO_AF(GPIOG_PIN0, 0U) | PIN_AFIO_AF(GPIOG_PIN1, 0U) | PIN_AFIO_AF(GPIOG_PIN2, 0U) | PIN_AFIO_AF(GPIOG_PIN3, 0U) | PIN_AFIO_AF(GPIOG_PIN4, 0U) | PIN_AFIO_AF(GPIOG_PIN5, 0U) | PIN_AFIO_AF(GPIOG_PIN6, 0U) | PIN_AFIO_AF(GPIOG_PIN7, 0U))
-#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_PIN8, 0U) | PIN_AFIO_AF(GPIOG_PIN9, 0U) | PIN_AFIO_AF(GPIOG_PIN10, 0U) | PIN_AFIO_AF(GPIOG_PIN11, 0U) | PIN_AFIO_AF(GPIOG_PIN12, 0U) | PIN_AFIO_AF(GPIOG_PIN13, 0U) | PIN_AFIO_AF(GPIOG_PIN14, 0U) | PIN_AFIO_AF(GPIOG_PIN15, 0U))
-
-/*
- * GPIOH setup:
- *
- * PH0  - OSC_IN                    (input floating).
- * PH1  - OSC_OUT                   (input floating).
- * PH2  - PIN2                      (input pullup).
- * PH3  - PIN3                      (input pullup).
- * PH4  - PIN4                      (input pullup).
- * PH5  - PIN5                      (input pullup).
- * PH6  - PIN6                      (input pullup).
- * PH7  - PIN7                      (input pullup).
- * PH8  - PIN8                      (input pullup).
- * PH9  - PIN9                      (input pullup).
- * PH10 - PIN10                     (input pullup).
- * PH11 - PIN11                     (input pullup).
- * PH12 - PIN12                     (input pullup).
- * PH13 - PIN13                     (input pullup).
- * PH14 - PIN14                     (input pullup).
- * PH15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_OSC_IN) | PIN_MODE_INPUT(GPIOH_OSC_OUT) | PIN_MODE_INPUT(GPIOH_PIN2) | PIN_MODE_INPUT(GPIOH_PIN3) | PIN_MODE_INPUT(GPIOH_PIN4) | PIN_MODE_INPUT(GPIOH_PIN5) | PIN_MODE_INPUT(GPIOH_PIN6) | PIN_MODE_INPUT(GPIOH_PIN7) | PIN_MODE_INPUT(GPIOH_PIN8) | PIN_MODE_INPUT(GPIOH_PIN9) | PIN_MODE_INPUT(GPIOH_PIN10) | PIN_MODE_INPUT(GPIOH_PIN11) | PIN_MODE_INPUT(GPIOH_PIN12) | PIN_MODE_INPUT(GPIOH_PIN13) | PIN_MODE_INPUT(GPIOH_PIN14) | PIN_MODE_INPUT(GPIOH_PIN15))
-#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_OSC_IN) | PIN_OTYPE_PUSHPULL(GPIOH_OSC_OUT) | PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | PIN_OTYPE_PUSHPULL(GPIOH_PIN7) | PIN_OTYPE_PUSHPULL(GPIOH_PIN8) | PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | PIN_OTYPE_PUSHPULL(GPIOH_PIN15))
-#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_HIGH(GPIOH_OSC_IN) | PIN_OSPEED_HIGH(GPIOH_OSC_OUT) | PIN_OSPEED_HIGH(GPIOH_PIN2) | PIN_OSPEED_HIGH(GPIOH_PIN3) | PIN_OSPEED_HIGH(GPIOH_PIN4) | PIN_OSPEED_HIGH(GPIOH_PIN5) | PIN_OSPEED_HIGH(GPIOH_PIN6) | PIN_OSPEED_HIGH(GPIOH_PIN7) | PIN_OSPEED_HIGH(GPIOH_PIN8) | PIN_OSPEED_HIGH(GPIOH_PIN9) | PIN_OSPEED_HIGH(GPIOH_PIN10) | PIN_OSPEED_HIGH(GPIOH_PIN11) | PIN_OSPEED_HIGH(GPIOH_PIN12) | PIN_OSPEED_HIGH(GPIOH_PIN13) | PIN_OSPEED_HIGH(GPIOH_PIN14) | PIN_OSPEED_HIGH(GPIOH_PIN15))
-#define VAL_GPIOH_PUPDR (PIN_PUPDR_FLOATING(GPIOH_OSC_IN) | PIN_PUPDR_FLOATING(GPIOH_OSC_OUT) | PIN_PUPDR_PULLUP(GPIOH_PIN2) | PIN_PUPDR_PULLUP(GPIOH_PIN3) | PIN_PUPDR_PULLUP(GPIOH_PIN4) | PIN_PUPDR_PULLUP(GPIOH_PIN5) | PIN_PUPDR_PULLUP(GPIOH_PIN6) | PIN_PUPDR_PULLUP(GPIOH_PIN7) | PIN_PUPDR_PULLUP(GPIOH_PIN8) | PIN_PUPDR_PULLUP(GPIOH_PIN9) | PIN_PUPDR_PULLUP(GPIOH_PIN10) | PIN_PUPDR_PULLUP(GPIOH_PIN11) | PIN_PUPDR_PULLUP(GPIOH_PIN12) | PIN_PUPDR_PULLUP(GPIOH_PIN13) | PIN_PUPDR_PULLUP(GPIOH_PIN14) | PIN_PUPDR_PULLUP(GPIOH_PIN15))
-#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_OSC_IN) | PIN_ODR_HIGH(GPIOH_OSC_OUT) | PIN_ODR_HIGH(GPIOH_PIN2) | PIN_ODR_HIGH(GPIOH_PIN3) | PIN_ODR_HIGH(GPIOH_PIN4) | PIN_ODR_HIGH(GPIOH_PIN5) | PIN_ODR_HIGH(GPIOH_PIN6) | PIN_ODR_HIGH(GPIOH_PIN7) | PIN_ODR_HIGH(GPIOH_PIN8) | PIN_ODR_HIGH(GPIOH_PIN9) | PIN_ODR_HIGH(GPIOH_PIN10) | PIN_ODR_HIGH(GPIOH_PIN11) | PIN_ODR_HIGH(GPIOH_PIN12) | PIN_ODR_HIGH(GPIOH_PIN13) | PIN_ODR_HIGH(GPIOH_PIN14) | PIN_ODR_HIGH(GPIOH_PIN15))
-#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_OSC_IN, 0U) | PIN_AFIO_AF(GPIOH_OSC_OUT, 0U) | PIN_AFIO_AF(GPIOH_PIN2, 0U) | PIN_AFIO_AF(GPIOH_PIN3, 0U) | PIN_AFIO_AF(GPIOH_PIN4, 0U) | PIN_AFIO_AF(GPIOH_PIN5, 0U) | PIN_AFIO_AF(GPIOH_PIN6, 0U) | PIN_AFIO_AF(GPIOH_PIN7, 0U))
-#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_PIN8, 0U) | PIN_AFIO_AF(GPIOH_PIN9, 0U) | PIN_AFIO_AF(GPIOH_PIN10, 0U) | PIN_AFIO_AF(GPIOH_PIN11, 0U) | PIN_AFIO_AF(GPIOH_PIN12, 0U) | PIN_AFIO_AF(GPIOH_PIN13, 0U) | PIN_AFIO_AF(GPIOH_PIN14, 0U) | PIN_AFIO_AF(GPIOH_PIN15, 0U))
-
-/*
- * GPIOI setup:
- *
- * PI0  - PIN0                      (input pullup).
- * PI1  - PIN1                      (input pullup).
- * PI2  - PIN2                      (input pullup).
- * PI3  - PIN3                      (input pullup).
- * PI4  - PIN4                      (input pullup).
- * PI5  - PIN5                      (input pullup).
- * PI6  - PIN6                      (input pullup).
- * PI7  - PIN7                      (input pullup).
- * PI8  - PIN8                      (input pullup).
- * PI9  - PIN9                      (input pullup).
- * PI10 - PIN10                     (input pullup).
- * PI11 - PIN11                     (input pullup).
- * PI12 - PIN12                     (input pullup).
- * PI13 - PIN13                     (input pullup).
- * PI14 - PIN14                     (input pullup).
- * PI15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOI_MODER (PIN_MODE_INPUT(GPIOI_PIN0) | PIN_MODE_INPUT(GPIOI_PIN1) | PIN_MODE_INPUT(GPIOI_PIN2) | PIN_MODE_INPUT(GPIOI_PIN3) | PIN_MODE_INPUT(GPIOI_PIN4) | PIN_MODE_INPUT(GPIOI_PIN5) | PIN_MODE_INPUT(GPIOI_PIN6) | PIN_MODE_INPUT(GPIOI_PIN7) | PIN_MODE_INPUT(GPIOI_PIN8) | PIN_MODE_INPUT(GPIOI_PIN9) | PIN_MODE_INPUT(GPIOI_PIN10) | PIN_MODE_INPUT(GPIOI_PIN11) | PIN_MODE_INPUT(GPIOI_PIN12) | PIN_MODE_INPUT(GPIOI_PIN13) | PIN_MODE_INPUT(GPIOI_PIN14) | PIN_MODE_INPUT(GPIOI_PIN15))
-#define VAL_GPIOI_OTYPER (PIN_OTYPE_PUSHPULL(GPIOI_PIN0) | PIN_OTYPE_PUSHPULL(GPIOI_PIN1) | PIN_OTYPE_PUSHPULL(GPIOI_PIN2) | PIN_OTYPE_PUSHPULL(GPIOI_PIN3) | PIN_OTYPE_PUSHPULL(GPIOI_PIN4) | PIN_OTYPE_PUSHPULL(GPIOI_PIN5) | PIN_OTYPE_PUSHPULL(GPIOI_PIN6) | PIN_OTYPE_PUSHPULL(GPIOI_PIN7) | PIN_OTYPE_PUSHPULL(GPIOI_PIN8) | PIN_OTYPE_PUSHPULL(GPIOI_PIN9) | PIN_OTYPE_PUSHPULL(GPIOI_PIN10) | PIN_OTYPE_PUSHPULL(GPIOI_PIN11) | PIN_OTYPE_PUSHPULL(GPIOI_PIN12) | PIN_OTYPE_PUSHPULL(GPIOI_PIN13) | PIN_OTYPE_PUSHPULL(GPIOI_PIN14) | PIN_OTYPE_PUSHPULL(GPIOI_PIN15))
-#define VAL_GPIOI_OSPEEDR (PIN_OSPEED_HIGH(GPIOI_PIN0) | PIN_OSPEED_HIGH(GPIOI_PIN1) | PIN_OSPEED_HIGH(GPIOI_PIN2) | PIN_OSPEED_HIGH(GPIOI_PIN3) | PIN_OSPEED_HIGH(GPIOI_PIN4) | PIN_OSPEED_HIGH(GPIOI_PIN5) | PIN_OSPEED_HIGH(GPIOI_PIN6) | PIN_OSPEED_HIGH(GPIOI_PIN7) | PIN_OSPEED_HIGH(GPIOI_PIN8) | PIN_OSPEED_HIGH(GPIOI_PIN9) | PIN_OSPEED_HIGH(GPIOI_PIN10) | PIN_OSPEED_HIGH(GPIOI_PIN11) | PIN_OSPEED_HIGH(GPIOI_PIN12) | PIN_OSPEED_HIGH(GPIOI_PIN13) | PIN_OSPEED_HIGH(GPIOI_PIN14) | PIN_OSPEED_HIGH(GPIOI_PIN15))
-#define VAL_GPIOI_PUPDR (PIN_PUPDR_PULLUP(GPIOI_PIN0) | PIN_PUPDR_PULLUP(GPIOI_PIN1) | PIN_PUPDR_PULLUP(GPIOI_PIN2) | PIN_PUPDR_PULLUP(GPIOI_PIN3) | PIN_PUPDR_PULLUP(GPIOI_PIN4) | PIN_PUPDR_PULLUP(GPIOI_PIN5) | PIN_PUPDR_PULLUP(GPIOI_PIN6) | PIN_PUPDR_PULLUP(GPIOI_PIN7) | PIN_PUPDR_PULLUP(GPIOI_PIN8) | PIN_PUPDR_PULLUP(GPIOI_PIN9) | PIN_PUPDR_PULLUP(GPIOI_PIN10) | PIN_PUPDR_PULLUP(GPIOI_PIN11) | PIN_PUPDR_PULLUP(GPIOI_PIN12) | PIN_PUPDR_PULLUP(GPIOI_PIN13) | PIN_PUPDR_PULLUP(GPIOI_PIN14) | PIN_PUPDR_PULLUP(GPIOI_PIN15))
-#define VAL_GPIOI_ODR (PIN_ODR_HIGH(GPIOI_PIN0) | PIN_ODR_HIGH(GPIOI_PIN1) | PIN_ODR_HIGH(GPIOI_PIN2) | PIN_ODR_HIGH(GPIOI_PIN3) | PIN_ODR_HIGH(GPIOI_PIN4) | PIN_ODR_HIGH(GPIOI_PIN5) | PIN_ODR_HIGH(GPIOI_PIN6) | PIN_ODR_HIGH(GPIOI_PIN7) | PIN_ODR_HIGH(GPIOI_PIN8) | PIN_ODR_HIGH(GPIOI_PIN9) | PIN_ODR_HIGH(GPIOI_PIN10) | PIN_ODR_HIGH(GPIOI_PIN11) | PIN_ODR_HIGH(GPIOI_PIN12) | PIN_ODR_HIGH(GPIOI_PIN13) | PIN_ODR_HIGH(GPIOI_PIN14) | PIN_ODR_HIGH(GPIOI_PIN15))
-#define VAL_GPIOI_AFRL (PIN_AFIO_AF(GPIOI_PIN0, 0U) | PIN_AFIO_AF(GPIOI_PIN1, 0U) | PIN_AFIO_AF(GPIOI_PIN2, 0U) | PIN_AFIO_AF(GPIOI_PIN3, 0U) | PIN_AFIO_AF(GPIOI_PIN4, 0U) | PIN_AFIO_AF(GPIOI_PIN5, 0U) | PIN_AFIO_AF(GPIOI_PIN6, 0U) | PIN_AFIO_AF(GPIOI_PIN7, 0U))
-#define VAL_GPIOI_AFRH (PIN_AFIO_AF(GPIOI_PIN8, 0U) | PIN_AFIO_AF(GPIOI_PIN9, 0U) | PIN_AFIO_AF(GPIOI_PIN10, 0U) | PIN_AFIO_AF(GPIOI_PIN11, 0U) | PIN_AFIO_AF(GPIOI_PIN12, 0U) | PIN_AFIO_AF(GPIOI_PIN13, 0U) | PIN_AFIO_AF(GPIOI_PIN14, 0U) | PIN_AFIO_AF(GPIOI_PIN15, 0U))
-
-/*===========================================================================*/
-/* External declarations.                                                    */
-/*===========================================================================*/
-
-#if !defined(_FROM_ASM_)
-#    ifdef __cplusplus
-extern "C" {
-#    endif
-void boardInit(void);
-#    ifdef __cplusplus
-}
-#    endif
-#endif /* _FROM_ASM_ */
-
-#endif /* BOARD_H */

drivers/boards/BLACKPILL_STM32_F411/cfg/board.fmpp

@@ -1,15 +0,0 @@
-sourceRoot: ../../../../../tools/ftl/processors/boards/stm32f4xx/templates
-outputRoot: ..
-dataRoot: .
-
-freemarkerLinks: {
-    lib: ../../../../../tools/ftl/libs
-}
-
-data : {
-  doc1:xml (
-    board.chcfg
-    {
-    }
-  )
-}

drivers/boards/GENERIC_STM32_F072XB/cfg/board.chcfg

@@ -1,703 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!-- STM32F0xx board Template -->
-<board
-  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
-  xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd">
-  <configuration_settings>
-    <templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path>
-    <output_path>..</output_path>
-    <hal_version>5.0.x</hal_version>
-  </configuration_settings>
-  <board_name>ST STM32F072B-Discovery</board_name>
-  <board_id>ST_STM32F072B_DISCOVERY</board_id>
-  <board_functions></board_functions>
-  <subtype>STM32F072xB</subtype>
-  <clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0"
-  	LSEBypass="false" LSEDrive="3 High Drive (default)" />
-  <ports>
-    <GPIOA>
-      <pin0
-        ID="BUTTON"
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin1
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin2
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin3
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin4
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin5
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin6
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin7
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin8
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin9
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin10
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin11
-        ID="USB_DM"
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin12
-        ID="USB_DP"
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin13
-        ID="SWDIO"
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Alternate"
-        Alternate="0" />
-      <pin14
-        ID="SWCLK"
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="PullDown"
-        Level="High"
-        Mode="Alternate"
-        Alternate="0" />
-      <pin15
-        ID=""
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-    </GPIOA>
-    <GPIOB>
-      <pin0
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin1
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin2
-        ID=""
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin3
-        ID=""
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin4
-        ID=""
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin5
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin6
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin7
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin8
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin9
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin10
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin11
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin12
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin13
-        ID="SPI2_SCK"
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Alternate"
-        Alternate="0" />
-      <pin14
-        ID="SPI2_MISO"
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Alternate"
-        Alternate="0" />
-      <pin15
-        ID="SPI2_MOSI"
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Alternate"
-        Alternate="0" />
-    </GPIOB>
-    <GPIOC>
-      <pin0
-        ID="MEMS_CS"
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Output"
-        Alternate="0" />
-      <pin1
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin2
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin3
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin4
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin5
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin6
-        ID="LED_RED"
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="Floating"
-        Level="Low"
-        Mode="Output"
-        Alternate="0" />
-      <pin7
-        ID="LED_BLUE"
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="Floating"
-        Level="Low"
-        Mode="Output"
-        Alternate="0" />
-      <pin8
-        ID="LED_ORANGE"
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="Floating"
-        Level="Low"
-        Mode="Output"
-        Alternate="0" ></pin8>
-      <pin9
-        ID="LED_GREEN"
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="Floating"
-        Level="Low"
-        Mode="Output"
-        Alternate="0" />
-      <pin10
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin11
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin12
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin13
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin14
-        ID="OSC32_IN"
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin15
-        ID="OSC32_OUT"
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-    </GPIOC>
-    <GPIOD>
-      <pin0
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin1
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin2
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin3
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin4
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin5
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin6
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin7
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin8
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin9
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin10
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin11
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin12
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin13
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin14
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin15
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-    </GPIOD>
-    <GPIOE>
-    	<pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    </GPIOE>
-    <GPIOF>
-      <pin0
-        ID="OSC_IN"
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin1
-        ID="OSC_OUT"
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin2
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin3
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin4
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin5
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin6
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin7
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin8
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin9
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin10
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin11
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin12
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin13
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin14
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin15
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-    </GPIOF>
-  </ports>
-</board>

drivers/boards/GENERIC_STM32_F072XB/cfg/board.fmpp

@@ -1,15 +0,0 @@
-sourceRoot: ../../../../../tools/ftl/processors/boards/stm32f0xx/templates
-outputRoot: ..
-dataRoot: .
-
-freemarkerLinks: {
-    lib: ../../../../../tools/ftl/libs
-}
-
-data : {
-  doc1:xml (
-    board.chcfg
-    {
-    }
-  )
-}

drivers/boards/GENERIC_STM32_F303XC/board.c

@@ -1,242 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * This file has been automatically generated using ChibiStudio board
- * generator plugin. Do not edit manually.
- */
-
-#include "hal.h"
-#include "stm32_gpio.h"
-
-/*===========================================================================*/
-/* Driver local definitions.                                                 */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported variables.                                                */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local variables and types.                                         */
-/*===========================================================================*/
-
-/**
- * @brief   Type of STM32 GPIO port setup.
- */
-typedef struct {
-    uint32_t moder;
-    uint32_t otyper;
-    uint32_t ospeedr;
-    uint32_t pupdr;
-    uint32_t odr;
-    uint32_t afrl;
-    uint32_t afrh;
-} gpio_setup_t;
-
-/**
- * @brief   Type of STM32 GPIO initialization data.
- */
-typedef struct {
-#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
-    gpio_setup_t PAData;
-#endif
-#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
-    gpio_setup_t PBData;
-#endif
-#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
-    gpio_setup_t PCData;
-#endif
-#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
-    gpio_setup_t PDData;
-#endif
-#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
-    gpio_setup_t PEData;
-#endif
-#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
-    gpio_setup_t PFData;
-#endif
-#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
-    gpio_setup_t PGData;
-#endif
-#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
-    gpio_setup_t PHData;
-#endif
-#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
-    gpio_setup_t PIData;
-#endif
-#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)
-    gpio_setup_t PJData;
-#endif
-#if STM32_HAS_GPIOK || defined(__DOXYGEN__)
-    gpio_setup_t PKData;
-#endif
-} gpio_config_t;
-
-/**
- * @brief   STM32 GPIO static initialization data.
- */
-static const gpio_config_t gpio_default_config = {
-#if STM32_HAS_GPIOA
-    {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
-#endif
-#if STM32_HAS_GPIOB
-    {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
-#endif
-#if STM32_HAS_GPIOC
-    {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
-#endif
-#if STM32_HAS_GPIOD
-    {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
-#endif
-#if STM32_HAS_GPIOE
-    {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
-#endif
-#if STM32_HAS_GPIOF
-    {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
-#endif
-#if STM32_HAS_GPIOG
-    {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
-#endif
-#if STM32_HAS_GPIOH
-    {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
-#endif
-#if STM32_HAS_GPIOI
-    {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH},
-#endif
-#if STM32_HAS_GPIOJ
-    {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH},
-#endif
-#if STM32_HAS_GPIOK
-    {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH}
-#endif
-};
-
-/*===========================================================================*/
-/* Driver local functions.                                                   */
-/*===========================================================================*/
-
-static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) {
-    gpiop->OTYPER  = config->otyper;
-    gpiop->OSPEEDR = config->ospeedr;
-    gpiop->PUPDR   = config->pupdr;
-    gpiop->ODR     = config->odr;
-    gpiop->AFRL    = config->afrl;
-    gpiop->AFRH    = config->afrh;
-    gpiop->MODER   = config->moder;
-}
-
-static void stm32_gpio_init(void) {
-    /* Enabling GPIO-related clocks, the mask comes from the
-       registry header file.*/
-    rccResetAHB(STM32_GPIO_EN_MASK);
-    rccEnableAHB(STM32_GPIO_EN_MASK, true);
-
-    /* Initializing all the defined GPIO ports.*/
-#if STM32_HAS_GPIOA
-    gpio_init(GPIOA, &gpio_default_config.PAData);
-#endif
-#if STM32_HAS_GPIOB
-    gpio_init(GPIOB, &gpio_default_config.PBData);
-#endif
-#if STM32_HAS_GPIOC
-    gpio_init(GPIOC, &gpio_default_config.PCData);
-#endif
-#if STM32_HAS_GPIOD
-    gpio_init(GPIOD, &gpio_default_config.PDData);
-#endif
-#if STM32_HAS_GPIOE
-    gpio_init(GPIOE, &gpio_default_config.PEData);
-#endif
-#if STM32_HAS_GPIOF
-    gpio_init(GPIOF, &gpio_default_config.PFData);
-#endif
-#if STM32_HAS_GPIOG
-    gpio_init(GPIOG, &gpio_default_config.PGData);
-#endif
-#if STM32_HAS_GPIOH
-    gpio_init(GPIOH, &gpio_default_config.PHData);
-#endif
-#if STM32_HAS_GPIOI
-    gpio_init(GPIOI, &gpio_default_config.PIData);
-#endif
-#if STM32_HAS_GPIOJ
-    gpio_init(GPIOJ, &gpio_default_config.PJData);
-#endif
-#if STM32_HAS_GPIOK
-    gpio_init(GPIOK, &gpio_default_config.PKData);
-#endif
-}
-
-void enter_bootloader_mode_if_requested(void);
-
-/**
- * @brief   Early initialization code.
- * @details This initialization must be performed just after stack setup
- *          and before any other initialization.
- */
-void __early_init(void) {
-    enter_bootloader_mode_if_requested();
-
-    stm32_gpio_init();
-    stm32_clock_init();
-}
-
-#if HAL_USE_SDC || defined(__DOXYGEN__)
-/**
- * @brief   SDC card detection.
- */
-bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
-    (void)sdcp;
-    /* TODO: Fill the implementation.*/
-    return true;
-}
-
-/**
- * @brief   SDC card write protection detection.
- */
-bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
-    (void)sdcp;
-    /* TODO: Fill the implementation.*/
-    return false;
-}
-#endif /* HAL_USE_SDC */
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief   MMC_SPI card detection.
- */
-bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-    (void)mmcp;
-    /* TODO: Fill the implementation.*/
-    return true;
-}
-
-/**
- * @brief   MMC_SPI card write protection detection.
- */
-bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
-    (void)mmcp;
-    /* TODO: Fill the implementation.*/
-    return false;
-}
-#endif
-
-/**
- * @brief   Board-specific initialization code.
- * @todo    Add your board-specific code, if any.
- */
-void boardInit(void) {}

drivers/boards/GENERIC_STM32_F303XC/board.h

@@ -1,475 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for Generic STM32_F303 Board
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_GENERIC_STM32_F303XC
-#define BOARD_NAME "STM32_F303"
-
-/*
- * Board oscillators-related settings.
- * NOTE: LSE not fitted.
- */
-#if !defined(STM32_LSECLK)
-#    define STM32_LSECLK 0U
-#endif
-
-#define STM32_LSEDRV (3U << 3U)
-
-#if !defined(STM32_HSECLK)
-#    define STM32_HSECLK 8000000U
-#endif
-
-// #define STM32_HSE_BYPASS
-
-/*
- * MCU type as defined in the ST header.
- */
-#define STM32F303xC
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_PIN0 0U
-#define GPIOA_PIN1 1U
-#define GPIOA_PIN2 2U
-#define GPIOA_PIN3 3U
-#define GPIOA_PIN4 4U
-#define GPIOA_PIN5 5U
-#define GPIOA_PIN6 6U
-#define GPIOA_PIN7 7U
-#define GPIOA_PIN8 8U
-#define GPIOA_PIN9 9U
-#define GPIOA_PIN10 10U
-#define GPIOA_USB_DM 11U
-#define GPIOA_USB_DP 12U
-#define GPIOA_SWDIO 13U
-#define GPIOA_SWCLK 14U
-#define GPIOA_PIN15 15U
-
-#define GPIOB_PIN0 0U
-#define GPIOB_PIN1 1U
-#define GPIOB_PIN2 2U
-#define GPIOB_PIN3 3U
-#define GPIOB_PIN4 4U
-#define GPIOB_PIN5 5U
-#define GPIOB_PIN6 6U
-#define GPIOB_PIN7 7U
-#define GPIOB_PIN8 8U
-#define GPIOB_PIN9 9U
-#define GPIOB_PIN10 10U
-#define GPIOB_PIN11 11U
-#define GPIOB_PIN12 12U
-#define GPIOB_PIN13 13U
-#define GPIOB_PIN14 14U
-#define GPIOB_PIN15 15U
-
-#define GPIOC_PIN0 0U
-#define GPIOC_PIN1 1U
-#define GPIOC_PIN2 2U
-#define GPIOC_PIN3 3U
-#define GPIOC_PIN4 4U
-#define GPIOC_PIN5 5U
-#define GPIOC_PIN6 6U
-#define GPIOC_PIN7 7U
-#define GPIOC_PIN8 8U
-#define GPIOC_PIN9 9U
-#define GPIOC_PIN10 10U
-#define GPIOC_PIN11 11U
-#define GPIOC_PIN12 12U
-#define GPIOC_PIN13 13U
-#define GPIOC_PIN14 14U
-#define GPIOC_PIN15 15U
-
-#define GPIOD_PIN0 0U
-#define GPIOD_PIN1 1U
-#define GPIOD_PIN2 2U
-#define GPIOD_PIN3 3U
-#define GPIOD_PIN4 4U
-#define GPIOD_PIN5 5U
-#define GPIOD_PIN6 6U
-#define GPIOD_PIN7 7U
-#define GPIOD_PIN8 8U
-#define GPIOD_PIN9 9U
-#define GPIOD_PIN10 10U
-#define GPIOD_PIN11 11U
-#define GPIOD_PIN12 12U
-#define GPIOD_PIN13 13U
-#define GPIOD_PIN14 14U
-#define GPIOD_PIN15 15U
-
-#define GPIOE_PIN0 0U
-#define GPIOE_PIN1 1U
-#define GPIOE_PIN2 2U
-#define GPIOE_PIN3 3U
-#define GPIOE_PIN4 4U
-#define GPIOE_PIN5 5U
-#define GPIOE_PIN6 6U
-#define GPIOE_PIN7 7U
-#define GPIOE_PIN8 8U
-#define GPIOE_PIN9 9U
-#define GPIOE_PIN10 10U
-#define GPIOE_PIN11 11U
-#define GPIOE_PIN12 12U
-#define GPIOE_PIN13 13U
-#define GPIOE_PIN14 14U
-#define GPIOE_PIN15 15U
-
-#define GPIOF_I2C2_SDA 0U
-#define GPIOF_I2C2_SCL 1U
-#define GPIOF_PIN2 2U
-#define GPIOF_PIN3 3U
-#define GPIOF_PIN4 4U
-#define GPIOF_PIN5 5U
-#define GPIOF_PIN6 6U
-#define GPIOF_PIN7 7U
-#define GPIOF_PIN8 8U
-#define GPIOF_PIN9 9U
-#define GPIOF_PIN10 10U
-#define GPIOF_PIN11 11U
-#define GPIOF_PIN12 12U
-#define GPIOF_PIN13 13U
-#define GPIOF_PIN14 14U
-#define GPIOF_PIN15 15U
-
-#define GPIOG_PIN0 0U
-#define GPIOG_PIN1 1U
-#define GPIOG_PIN2 2U
-#define GPIOG_PIN3 3U
-#define GPIOG_PIN4 4U
-#define GPIOG_PIN5 5U
-#define GPIOG_PIN6 6U
-#define GPIOG_PIN7 7U
-#define GPIOG_PIN8 8U
-#define GPIOG_PIN9 9U
-#define GPIOG_PIN10 10U
-#define GPIOG_PIN11 11U
-#define GPIOG_PIN12 12U
-#define GPIOG_PIN13 13U
-#define GPIOG_PIN14 14U
-#define GPIOG_PIN15 15U
-
-#define GPIOH_PIN0 0U
-#define GPIOH_PIN1 1U
-#define GPIOH_PIN2 2U
-#define GPIOH_PIN3 3U
-#define GPIOH_PIN4 4U
-#define GPIOH_PIN5 5U
-#define GPIOH_PIN6 6U
-#define GPIOH_PIN7 7U
-#define GPIOH_PIN8 8U
-#define GPIOH_PIN9 9U
-#define GPIOH_PIN10 10U
-#define GPIOH_PIN11 11U
-#define GPIOH_PIN12 12U
-#define GPIOH_PIN13 13U
-#define GPIOH_PIN14 14U
-#define GPIOH_PIN15 15U
-
-/*
- * IO lines assignments.
- */
-#define LINE_L3GD20_SDI PAL_LINE(GPIOA, 7U)
-#define LINE_USB_DM PAL_LINE(GPIOA, 11U)
-#define LINE_USB_DP PAL_LINE(GPIOA, 12U)
-#define LINE_SWDIO PAL_LINE(GPIOA, 13U)
-#define LINE_SWCLK PAL_LINE(GPIOA, 14U)
-
-#define LINE_PIN6 PAL_LINE(GPIOF, 0U)
-#define LINE_PIN7 PAL_LINE(GPIOF, 1U)
-
-#define LINE_CAPS_LOCK PAL_LINE(GPIOB, 7U)
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the STM32 Reference Manual for details.
- */
-#define PIN_MODE_INPUT(n) (0U << ((n)*2U))
-#define PIN_MODE_OUTPUT(n) (1U << ((n)*2U))
-#define PIN_MODE_ALTERNATE(n) (2U << ((n)*2U))
-#define PIN_MODE_ANALOG(n) (3U << ((n)*2U))
-#define PIN_ODR_LOW(n) (0U << (n))
-#define PIN_ODR_HIGH(n) (1U << (n))
-#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
-#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
-#define PIN_OSPEED_VERYLOW(n) (0U << ((n)*2U))
-#define PIN_OSPEED_LOW(n) (1U << ((n)*2U))
-#define PIN_OSPEED_MEDIUM(n) (2U << ((n)*2U))
-#define PIN_OSPEED_HIGH(n) (3U << ((n)*2U))
-#define PIN_PUPDR_FLOATING(n) (0U << ((n)*2U))
-#define PIN_PUPDR_PULLUP(n) (1U << ((n)*2U))
-#define PIN_PUPDR_PULLDOWN(n) (2U << ((n)*2U))
-#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U))
-
-/*
- * GPIOA setup:
- *
- * PA0  - NC
- * PA1  - NC
- * PA2  - COL1
- * PA3  - COL2
- * PA4  - SPEAKER1
- * PA5  - SPEAKER2
- * PA6  - COL3
- * PA7  - COL8
- * PA8  - COL6
- * PA9  - COL7
- * PA10 - ROW5
- * PA11 - USB_DM                    (alternate 14).
- * PA12 - USB_DP                    (alternate 14).
- * PA13 - SWDIO                     (alternate 0).
- * PA14 - SWCLK                     (alternate 0).
- * PA15 - ROW4
- */
-#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_PIN0) | PIN_MODE_ALTERNATE(GPIOA_PIN1) | PIN_MODE_INPUT(GPIOA_PIN2) | PIN_MODE_INPUT(GPIOA_PIN3) | PIN_MODE_INPUT(GPIOA_PIN4) | PIN_MODE_INPUT(GPIOA_PIN5) | PIN_MODE_INPUT(GPIOA_PIN6) | PIN_MODE_INPUT(GPIOA_PIN7) | PIN_MODE_INPUT(GPIOA_PIN8) | PIN_MODE_INPUT(GPIOA_PIN9) | PIN_MODE_INPUT(GPIOA_PIN10) | PIN_MODE_ALTERNATE(GPIOA_USB_DM) | PIN_MODE_ALTERNATE(GPIOA_USB_DP) | PIN_MODE_ALTERNATE(GPIOA_SWDIO) | PIN_MODE_ALTERNATE(GPIOA_SWCLK) | PIN_MODE_INPUT(GPIOA_PIN15))
-#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_PIN0) | PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
-#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_PIN0) | PIN_OSPEED_HIGH(GPIOA_PIN1) | PIN_OSPEED_VERYLOW(GPIOA_PIN2) | PIN_OSPEED_VERYLOW(GPIOA_PIN3) | PIN_OSPEED_VERYLOW(GPIOA_PIN4) | PIN_OSPEED_VERYLOW(GPIOA_PIN5) | PIN_OSPEED_VERYLOW(GPIOA_PIN6) | PIN_OSPEED_VERYLOW(GPIOA_PIN7) | PIN_OSPEED_VERYLOW(GPIOA_PIN8) | PIN_OSPEED_VERYLOW(GPIOA_PIN9) | PIN_OSPEED_VERYLOW(GPIOA_PIN10) | PIN_OSPEED_HIGH(GPIOA_USB_DM) | PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | PIN_OSPEED_HIGH(GPIOA_SWDIO) | PIN_OSPEED_HIGH(GPIOA_SWCLK) | PIN_OSPEED_VERYLOW(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_PIN0) | PIN_PUPDR_FLOATING(GPIOA_PIN1) | PIN_PUPDR_PULLUP(GPIOA_PIN2) | PIN_PUPDR_PULLUP(GPIOA_PIN3) | PIN_PUPDR_PULLUP(GPIOA_PIN4) | PIN_PUPDR_PULLUP(GPIOA_PIN5) | PIN_PUPDR_PULLUP(GPIOA_PIN6) | PIN_PUPDR_FLOATING(GPIOA_PIN7) | PIN_PUPDR_PULLUP(GPIOA_PIN8) | PIN_PUPDR_PULLUP(GPIOA_PIN9) | PIN_PUPDR_PULLUP(GPIOA_PIN10) | PIN_PUPDR_FLOATING(GPIOA_USB_DM) | PIN_PUPDR_FLOATING(GPIOA_USB_DP) | PIN_PUPDR_PULLUP(GPIOA_SWDIO) | PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | PIN_PUPDR_PULLUP(GPIOA_PIN15))
-#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_PIN0) | PIN_ODR_HIGH(GPIOA_PIN1) | PIN_ODR_HIGH(GPIOA_PIN2) | PIN_ODR_HIGH(GPIOA_PIN3) | PIN_ODR_HIGH(GPIOA_PIN4) | PIN_ODR_HIGH(GPIOA_PIN5) | PIN_ODR_HIGH(GPIOA_PIN6) | PIN_ODR_HIGH(GPIOA_PIN7) | PIN_ODR_HIGH(GPIOA_PIN8) | PIN_ODR_HIGH(GPIOA_PIN9) | PIN_ODR_HIGH(GPIOA_PIN10) | PIN_ODR_HIGH(GPIOA_USB_DM) | PIN_ODR_HIGH(GPIOA_USB_DP) | PIN_ODR_HIGH(GPIOA_SWDIO) | PIN_ODR_HIGH(GPIOA_SWCLK) | PIN_ODR_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_PIN0, 0) | PIN_AFIO_AF(GPIOA_PIN1, 1) | PIN_AFIO_AF(GPIOA_PIN2, 0) | PIN_AFIO_AF(GPIOA_PIN3, 0) | PIN_AFIO_AF(GPIOA_PIN4, 0) | PIN_AFIO_AF(GPIOA_PIN5, 5) | PIN_AFIO_AF(GPIOA_PIN6, 5) | PIN_AFIO_AF(GPIOA_PIN7, 5))
-#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0) | PIN_AFIO_AF(GPIOA_PIN9, 0) | PIN_AFIO_AF(GPIOA_PIN10, 0) | PIN_AFIO_AF(GPIOA_USB_DM, 14) | PIN_AFIO_AF(GPIOA_USB_DP, 14) | PIN_AFIO_AF(GPIOA_SWDIO, 0) | PIN_AFIO_AF(GPIOA_SWCLK, 0) | PIN_AFIO_AF(GPIOA_PIN15, 0))
-
-/*
- * GPIOB setup:
- *
- * PB0  - PIN0                      (input pullup).
- * PB1  - PIN1                      (input pullup).
- * PB2  - PIN2                      (input pullup).
- * PB3  - PIN3                       (alternate 0).
- * PB4  - PIN4                      (input pullup).
- * PB5  - PIN5                      (input pullup).
- * PB6  - PIN6 LSM303DLHC_SCL   (alternate 4).
- * PB7  - PIN7 LSM303DLHC_SDA   (alternate 4).
- * PB8  - PIN8                      (input pullup).
- * PB9  - PIN9                      (input pullup).
- * PB10 - PIN10                     (input pullup).
- * PB11 - PIN11                     (input pullup).
- * PB12 - PIN12                     (input pullup).
- * PB13 - PIN13                     (input pullup).
- * PB14 - PIN14                     (input pullup).
- * PB15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | PIN_MODE_INPUT(GPIOB_PIN1) | PIN_MODE_INPUT(GPIOB_PIN2) | PIN_MODE_ALTERNATE(GPIOB_PIN3) | PIN_MODE_INPUT(GPIOB_PIN4) | PIN_MODE_INPUT(GPIOB_PIN5) | PIN_MODE_ALTERNATE(GPIOB_PIN6) | PIN_MODE_OUTPUT(GPIOB_PIN7) | PIN_MODE_INPUT(GPIOB_PIN8) | PIN_MODE_INPUT(GPIOB_PIN9) | PIN_MODE_INPUT(GPIOB_PIN10) | PIN_MODE_INPUT(GPIOB_PIN11) | PIN_MODE_INPUT(GPIOB_PIN12) | PIN_MODE_INPUT(GPIOB_PIN13) | PIN_MODE_INPUT(GPIOB_PIN14) | PIN_MODE_INPUT(GPIOB_PIN15))
-#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | PIN_OTYPE_OPENDRAIN(GPIOB_PIN6) | PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | PIN_OTYPE_PUSHPULL(GPIOB_PIN15))
-#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | PIN_OSPEED_VERYLOW(GPIOB_PIN1) | PIN_OSPEED_VERYLOW(GPIOB_PIN2) | PIN_OSPEED_HIGH(GPIOB_PIN3) | PIN_OSPEED_VERYLOW(GPIOB_PIN4) | PIN_OSPEED_VERYLOW(GPIOB_PIN5) | PIN_OSPEED_HIGH(GPIOB_PIN6) | PIN_OSPEED_VERYLOW(GPIOB_PIN7) | PIN_OSPEED_VERYLOW(GPIOB_PIN8) | PIN_OSPEED_VERYLOW(GPIOB_PIN9) | PIN_OSPEED_VERYLOW(GPIOB_PIN10) | PIN_OSPEED_VERYLOW(GPIOB_PIN11) | PIN_OSPEED_VERYLOW(GPIOB_PIN12) | PIN_OSPEED_VERYLOW(GPIOB_PIN13) | PIN_OSPEED_VERYLOW(GPIOB_PIN14) | PIN_OSPEED_VERYLOW(GPIOB_PIN15))
-#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | PIN_PUPDR_PULLUP(GPIOB_PIN1) | PIN_PUPDR_PULLUP(GPIOB_PIN2) | PIN_PUPDR_FLOATING(GPIOB_PIN3) | PIN_PUPDR_PULLUP(GPIOB_PIN4) | PIN_PUPDR_PULLUP(GPIOB_PIN5) | PIN_PUPDR_FLOATING(GPIOB_PIN6) | PIN_PUPDR_PULLDOWN(GPIOB_PIN7) | PIN_PUPDR_PULLUP(GPIOB_PIN8) | PIN_PUPDR_PULLUP(GPIOB_PIN9) | PIN_PUPDR_PULLUP(GPIOB_PIN10) | PIN_PUPDR_PULLUP(GPIOB_PIN11) | PIN_PUPDR_PULLUP(GPIOB_PIN12) | PIN_PUPDR_PULLUP(GPIOB_PIN13) | PIN_PUPDR_PULLUP(GPIOB_PIN14) | PIN_PUPDR_PULLUP(GPIOB_PIN15))
-#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | PIN_ODR_HIGH(GPIOB_PIN1) | PIN_ODR_HIGH(GPIOB_PIN2) | PIN_ODR_HIGH(GPIOB_PIN3) | PIN_ODR_HIGH(GPIOB_PIN4) | PIN_ODR_HIGH(GPIOB_PIN5) | PIN_ODR_HIGH(GPIOB_PIN6) | PIN_ODR_LOW(GPIOB_PIN7) | PIN_ODR_HIGH(GPIOB_PIN8) | PIN_ODR_HIGH(GPIOB_PIN9) | PIN_ODR_HIGH(GPIOB_PIN10) | PIN_ODR_HIGH(GPIOB_PIN11) | PIN_ODR_HIGH(GPIOB_PIN12) | PIN_ODR_HIGH(GPIOB_PIN13) | PIN_ODR_HIGH(GPIOB_PIN14) | PIN_ODR_HIGH(GPIOB_PIN15))
-#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0) | PIN_AFIO_AF(GPIOB_PIN1, 0) | PIN_AFIO_AF(GPIOB_PIN2, 0) | PIN_AFIO_AF(GPIOB_PIN3, 0) | PIN_AFIO_AF(GPIOB_PIN4, 0) | PIN_AFIO_AF(GPIOB_PIN5, 0) | PIN_AFIO_AF(GPIOB_PIN6, 4) | PIN_AFIO_AF(GPIOB_PIN7, 0))
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0) | PIN_AFIO_AF(GPIOB_PIN9, 0) | PIN_AFIO_AF(GPIOB_PIN10, 0) | PIN_AFIO_AF(GPIOB_PIN11, 0) | PIN_AFIO_AF(GPIOB_PIN12, 0) | PIN_AFIO_AF(GPIOB_PIN13, 0) | PIN_AFIO_AF(GPIOB_PIN14, 0) | PIN_AFIO_AF(GPIOB_PIN15, 0))
-
-/*
- * GPIOC setup:
- *
- * PC0  - PIN0                      (input pullup).
- * PC1  - PIN1                      (input pullup).
- * PC2  - PIN2                      (input pullup).
- * PC3  - PIN3                      (input pullup).
- * PC4  - PIN4                      (input pullup).
- * PC5  - PIN5                      (input pullup).
- * PC6  - PIN6                      (input pullup).
- * PC7  - PIN7                      (input pullup).
- * PC8  - PIN8                      (input pullup).
- * PC9  - PIN9                      (input pullup).
- * PC10 - PIN10                     (input pullup).
- * PC11 - PIN11                     (input pullup).
- * PC12 - PIN12                     (input pullup).
- * PC13 - PIN13                     (input pullup).
- * PC14 - PIN14                  (input floating).
- * PC15 - PIN15                 (input floating).
- */
-#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_PIN0) | PIN_MODE_INPUT(GPIOC_PIN1) | PIN_MODE_INPUT(GPIOC_PIN2) | PIN_MODE_INPUT(GPIOC_PIN3) | PIN_MODE_INPUT(GPIOC_PIN4) | PIN_MODE_INPUT(GPIOC_PIN5) | PIN_MODE_INPUT(GPIOC_PIN6) | PIN_MODE_INPUT(GPIOC_PIN7) | PIN_MODE_INPUT(GPIOC_PIN8) | PIN_MODE_INPUT(GPIOC_PIN9) | PIN_MODE_INPUT(GPIOC_PIN10) | PIN_MODE_INPUT(GPIOC_PIN11) | PIN_MODE_INPUT(GPIOC_PIN12) | PIN_MODE_INPUT(GPIOC_PIN13) | PIN_MODE_INPUT(GPIOC_PIN14) | PIN_MODE_INPUT(GPIOC_PIN15))
-#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_PIN0) | PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | PIN_OTYPE_PUSHPULL(GPIOC_PIN7) | PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | PIN_OTYPE_PUSHPULL(GPIOC_PIN14) | PIN_OTYPE_PUSHPULL(GPIOC_PIN15))
-#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOC_PIN0) | PIN_OSPEED_VERYLOW(GPIOC_PIN1) | PIN_OSPEED_VERYLOW(GPIOC_PIN2) | PIN_OSPEED_VERYLOW(GPIOC_PIN3) | PIN_OSPEED_VERYLOW(GPIOC_PIN4) | PIN_OSPEED_VERYLOW(GPIOC_PIN5) | PIN_OSPEED_VERYLOW(GPIOC_PIN6) | PIN_OSPEED_VERYLOW(GPIOC_PIN7) | PIN_OSPEED_VERYLOW(GPIOC_PIN8) | PIN_OSPEED_VERYLOW(GPIOC_PIN9) | PIN_OSPEED_VERYLOW(GPIOC_PIN10) | PIN_OSPEED_VERYLOW(GPIOC_PIN11) | PIN_OSPEED_VERYLOW(GPIOC_PIN12) | PIN_OSPEED_VERYLOW(GPIOC_PIN13) | PIN_OSPEED_HIGH(GPIOC_PIN14) | PIN_OSPEED_HIGH(GPIOC_PIN15))
-#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_PIN0) | PIN_PUPDR_PULLUP(GPIOC_PIN1) | PIN_PUPDR_PULLUP(GPIOC_PIN2) | PIN_PUPDR_PULLUP(GPIOC_PIN3) | PIN_PUPDR_PULLUP(GPIOC_PIN4) | PIN_PUPDR_PULLUP(GPIOC_PIN5) | PIN_PUPDR_PULLUP(GPIOC_PIN6) | PIN_PUPDR_PULLUP(GPIOC_PIN7) | PIN_PUPDR_PULLUP(GPIOC_PIN8) | PIN_PUPDR_PULLUP(GPIOC_PIN9) | PIN_PUPDR_PULLUP(GPIOC_PIN10) | PIN_PUPDR_PULLUP(GPIOC_PIN11) | PIN_PUPDR_PULLUP(GPIOC_PIN12) | PIN_PUPDR_PULLUP(GPIOC_PIN13) | PIN_PUPDR_FLOATING(GPIOC_PIN14) | PIN_PUPDR_FLOATING(GPIOC_PIN15))
-#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_PIN0) | PIN_ODR_HIGH(GPIOC_PIN1) | PIN_ODR_HIGH(GPIOC_PIN2) | PIN_ODR_HIGH(GPIOC_PIN3) | PIN_ODR_HIGH(GPIOC_PIN4) | PIN_ODR_HIGH(GPIOC_PIN5) | PIN_ODR_HIGH(GPIOC_PIN6) | PIN_ODR_HIGH(GPIOC_PIN7) | PIN_ODR_HIGH(GPIOC_PIN8) | PIN_ODR_HIGH(GPIOC_PIN9) | PIN_ODR_HIGH(GPIOC_PIN10) | PIN_ODR_HIGH(GPIOC_PIN11) | PIN_ODR_HIGH(GPIOC_PIN12) | PIN_ODR_HIGH(GPIOC_PIN13) | PIN_ODR_HIGH(GPIOC_PIN14) | PIN_ODR_HIGH(GPIOC_PIN15))
-#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_PIN0, 0) | PIN_AFIO_AF(GPIOC_PIN1, 0) | PIN_AFIO_AF(GPIOC_PIN2, 0) | PIN_AFIO_AF(GPIOC_PIN3, 0) | PIN_AFIO_AF(GPIOC_PIN4, 0) | PIN_AFIO_AF(GPIOC_PIN5, 0) | PIN_AFIO_AF(GPIOC_PIN6, 0) | PIN_AFIO_AF(GPIOC_PIN7, 0))
-#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0) | PIN_AFIO_AF(GPIOC_PIN9, 0) | PIN_AFIO_AF(GPIOC_PIN10, 0) | PIN_AFIO_AF(GPIOC_PIN11, 0) | PIN_AFIO_AF(GPIOC_PIN12, 0) | PIN_AFIO_AF(GPIOC_PIN13, 0) | PIN_AFIO_AF(GPIOC_PIN14, 0) | PIN_AFIO_AF(GPIOC_PIN15, 0))
-
-/*
- * GPIOD setup:
- *
- * PD0  - PIN0                      (input pullup).
- * PD1  - PIN1                      (input pullup).
- * PD2  - PIN2                      (input pullup).
- * PD3  - PIN3                      (input pullup).
- * PD4  - PIN4                      (input pullup).
- * PD5  - PIN5                      (input pullup).
- * PD6  - PIN6                      (input pullup).
- * PD7  - PIN7                      (input pullup).
- * PD8  - PIN8                      (input pullup).
- * PD9  - PIN9                      (input pullup).
- * PD11 - PIN10                     (input pullup).
- * PD11 - PIN11                     (input pullup).
- * PD12 - PIN12                     (input pullup).
- * PD13 - PIN13                     (input pullup).
- * PD14 - PIN14                     (input pullup).
- * PD15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | PIN_MODE_INPUT(GPIOD_PIN1) | PIN_MODE_INPUT(GPIOD_PIN2) | PIN_MODE_INPUT(GPIOD_PIN3) | PIN_MODE_INPUT(GPIOD_PIN4) | PIN_MODE_INPUT(GPIOD_PIN5) | PIN_MODE_INPUT(GPIOD_PIN6) | PIN_MODE_INPUT(GPIOD_PIN7) | PIN_MODE_INPUT(GPIOD_PIN8) | PIN_MODE_INPUT(GPIOD_PIN9) | PIN_MODE_INPUT(GPIOD_PIN10) | PIN_MODE_INPUT(GPIOD_PIN11) | PIN_MODE_INPUT(GPIOD_PIN12) | PIN_MODE_INPUT(GPIOD_PIN13) | PIN_MODE_INPUT(GPIOD_PIN14) | PIN_MODE_INPUT(GPIOD_PIN15))
-#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
-#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | PIN_OSPEED_VERYLOW(GPIOD_PIN1) | PIN_OSPEED_VERYLOW(GPIOD_PIN2) | PIN_OSPEED_VERYLOW(GPIOD_PIN3) | PIN_OSPEED_VERYLOW(GPIOD_PIN4) | PIN_OSPEED_VERYLOW(GPIOD_PIN5) | PIN_OSPEED_VERYLOW(GPIOD_PIN6) | PIN_OSPEED_VERYLOW(GPIOD_PIN7) | PIN_OSPEED_VERYLOW(GPIOD_PIN8) | PIN_OSPEED_VERYLOW(GPIOD_PIN9) | PIN_OSPEED_VERYLOW(GPIOD_PIN10) | PIN_OSPEED_VERYLOW(GPIOD_PIN11) | PIN_OSPEED_VERYLOW(GPIOD_PIN12) | PIN_OSPEED_VERYLOW(GPIOD_PIN13) | PIN_OSPEED_VERYLOW(GPIOD_PIN14) | PIN_OSPEED_VERYLOW(GPIOD_PIN15))
-#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | PIN_PUPDR_PULLUP(GPIOD_PIN1) | PIN_PUPDR_PULLUP(GPIOD_PIN2) | PIN_PUPDR_PULLUP(GPIOD_PIN3) | PIN_PUPDR_PULLUP(GPIOD_PIN4) | PIN_PUPDR_PULLUP(GPIOD_PIN5) | PIN_PUPDR_PULLUP(GPIOD_PIN6) | PIN_PUPDR_PULLUP(GPIOD_PIN7) | PIN_PUPDR_PULLUP(GPIOD_PIN8) | PIN_PUPDR_PULLUP(GPIOD_PIN9) | PIN_PUPDR_PULLUP(GPIOD_PIN10) | PIN_PUPDR_PULLUP(GPIOD_PIN11) | PIN_PUPDR_PULLUP(GPIOD_PIN12) | PIN_PUPDR_PULLUP(GPIOD_PIN13) | PIN_PUPDR_PULLUP(GPIOD_PIN14) | PIN_PUPDR_PULLUP(GPIOD_PIN15))
-#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | PIN_ODR_HIGH(GPIOD_PIN1) | PIN_ODR_HIGH(GPIOD_PIN2) | PIN_ODR_HIGH(GPIOD_PIN3) | PIN_ODR_HIGH(GPIOD_PIN4) | PIN_ODR_HIGH(GPIOD_PIN5) | PIN_ODR_HIGH(GPIOD_PIN6) | PIN_ODR_HIGH(GPIOD_PIN7) | PIN_ODR_HIGH(GPIOD_PIN8) | PIN_ODR_HIGH(GPIOD_PIN9) | PIN_ODR_HIGH(GPIOD_PIN10) | PIN_ODR_HIGH(GPIOD_PIN11) | PIN_ODR_HIGH(GPIOD_PIN12) | PIN_ODR_HIGH(GPIOD_PIN13) | PIN_ODR_HIGH(GPIOD_PIN14) | PIN_ODR_HIGH(GPIOD_PIN15))
-#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0) | PIN_AFIO_AF(GPIOD_PIN1, 0) | PIN_AFIO_AF(GPIOD_PIN2, 0) | PIN_AFIO_AF(GPIOD_PIN3, 0) | PIN_AFIO_AF(GPIOD_PIN4, 0) | PIN_AFIO_AF(GPIOD_PIN5, 0) | PIN_AFIO_AF(GPIOD_PIN6, 0) | PIN_AFIO_AF(GPIOD_PIN7, 0))
-#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0) | PIN_AFIO_AF(GPIOD_PIN9, 0) | PIN_AFIO_AF(GPIOD_PIN10, 0) | PIN_AFIO_AF(GPIOD_PIN11, 0) | PIN_AFIO_AF(GPIOD_PIN12, 0) | PIN_AFIO_AF(GPIOD_PIN13, 0) | PIN_AFIO_AF(GPIOD_PIN14, 0) | PIN_AFIO_AF(GPIOD_PIN15, 0))
-
-/*
- * GPIOE setup:
- *
- * PE0  - PIN0               (input pullup).
- * PE1  - PIN1               (input pullup).
- * PE2  - PIN2           (input pullup).
- * PE3  - PIN3 L3GD20_CS         (output pushpull maximum).
- * PE4  - PIN4           (input pullup).
- * PE5  - PIN5           (input pullup).
- * PE6  - PIN6                      (input pullup).
- * PE7  - PIN7                      (input pullup).
- * PE8  - PIN8                 (output pushpull maximum).
- * PE9  - PIN9                  (output pushpull maximum).
- * PE10 - PIN10               (output pushpull maximum).
- * PE11 - PIN11                (output pushpull maximum).
- * PE12 - PIN12                 (output pushpull maximum).
- * PE13 - PIN13                 (output pushpull maximum).
- * PE14 - PIN14               (output pushpull maximum).
- * PE15 - PIN15                (output pushpull maximum).
- */
-#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | PIN_MODE_INPUT(GPIOE_PIN1) | PIN_MODE_INPUT(GPIOE_PIN2) | PIN_MODE_OUTPUT(GPIOE_PIN3) | PIN_MODE_INPUT(GPIOE_PIN4) | PIN_MODE_INPUT(GPIOE_PIN5) | PIN_MODE_INPUT(GPIOE_PIN6) | PIN_MODE_INPUT(GPIOE_PIN7) | PIN_MODE_OUTPUT(GPIOE_PIN8) | PIN_MODE_OUTPUT(GPIOE_PIN9) | PIN_MODE_OUTPUT(GPIOE_PIN10) | PIN_MODE_OUTPUT(GPIOE_PIN11) | PIN_MODE_OUTPUT(GPIOE_PIN12) | PIN_MODE_OUTPUT(GPIOE_PIN13) | PIN_MODE_OUTPUT(GPIOE_PIN14) | PIN_MODE_OUTPUT(GPIOE_PIN15))
-#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
-#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | PIN_OSPEED_VERYLOW(GPIOE_PIN1) | PIN_OSPEED_VERYLOW(GPIOE_PIN2) | PIN_OSPEED_HIGH(GPIOE_PIN3) | PIN_OSPEED_VERYLOW(GPIOE_PIN4) | PIN_OSPEED_VERYLOW(GPIOE_PIN5) | PIN_OSPEED_VERYLOW(GPIOE_PIN6) | PIN_OSPEED_VERYLOW(GPIOE_PIN7) | PIN_OSPEED_HIGH(GPIOE_PIN8) | PIN_OSPEED_HIGH(GPIOE_PIN9) | PIN_OSPEED_HIGH(GPIOE_PIN10) | PIN_OSPEED_HIGH(GPIOE_PIN11) | PIN_OSPEED_HIGH(GPIOE_PIN12) | PIN_OSPEED_HIGH(GPIOE_PIN13) | PIN_OSPEED_HIGH(GPIOE_PIN14) | PIN_OSPEED_HIGH(GPIOE_PIN15))
-#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | PIN_PUPDR_PULLUP(GPIOE_PIN1) | PIN_PUPDR_PULLUP(GPIOE_PIN2) | PIN_PUPDR_FLOATING(GPIOE_PIN3) | PIN_PUPDR_PULLUP(GPIOE_PIN4) | PIN_PUPDR_PULLUP(GPIOE_PIN5) | PIN_PUPDR_PULLUP(GPIOE_PIN6) | PIN_PUPDR_PULLUP(GPIOE_PIN7) | PIN_PUPDR_PULLUP(GPIOE_PIN8) | PIN_PUPDR_PULLUP(GPIOE_PIN9) | PIN_PUPDR_PULLUP(GPIOE_PIN10) | PIN_PUPDR_FLOATING(GPIOE_PIN11) | PIN_PUPDR_PULLUP(GPIOE_PIN12) | PIN_PUPDR_FLOATING(GPIOE_PIN13) | PIN_PUPDR_FLOATING(GPIOE_PIN14) | PIN_PUPDR_FLOATING(GPIOE_PIN15))
-#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | PIN_ODR_HIGH(GPIOE_PIN1) | PIN_ODR_HIGH(GPIOE_PIN2) | PIN_ODR_HIGH(GPIOE_PIN3) | PIN_ODR_HIGH(GPIOE_PIN4) | PIN_ODR_HIGH(GPIOE_PIN5) | PIN_ODR_HIGH(GPIOE_PIN6) | PIN_ODR_HIGH(GPIOE_PIN7) | PIN_ODR_LOW(GPIOE_PIN8) | PIN_ODR_LOW(GPIOE_PIN9) | PIN_ODR_LOW(GPIOE_PIN10) | PIN_ODR_LOW(GPIOE_PIN11) | PIN_ODR_LOW(GPIOE_PIN12) | PIN_ODR_LOW(GPIOE_PIN13) | PIN_ODR_LOW(GPIOE_PIN14) | PIN_ODR_LOW(GPIOE_PIN15))
-#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0) | PIN_AFIO_AF(GPIOE_PIN1, 0) | PIN_AFIO_AF(GPIOE_PIN2, 0) | PIN_AFIO_AF(GPIOE_PIN3, 0) | PIN_AFIO_AF(GPIOE_PIN4, 0) | PIN_AFIO_AF(GPIOE_PIN5, 0) | PIN_AFIO_AF(GPIOE_PIN6, 0) | PIN_AFIO_AF(GPIOE_PIN7, 0))
-#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0) | PIN_AFIO_AF(GPIOE_PIN9, 0) | PIN_AFIO_AF(GPIOE_PIN10, 0) | PIN_AFIO_AF(GPIOE_PIN11, 0) | PIN_AFIO_AF(GPIOE_PIN12, 0) | PIN_AFIO_AF(GPIOE_PIN13, 0) | PIN_AFIO_AF(GPIOE_PIN14, 0) | PIN_AFIO_AF(GPIOE_PIN15, 0))
-
-/*
- * GPIOF setup:
- *
- * PF0  - I2C2_SDA                    (input floating).
- * PF1  - I2C2_SCL                   (input floating).
- * PF2  - PIN2                      (input pullup).
- * PF3  - PIN3                      (input pullup).
- * PF4  - PIN4                      (input pullup).
- * PF5  - PIN5                      (input pullup).
- * PF6  - PIN6                      (input pullup).
- * PF7  - PIN7                      (input pullup).
- * PF8  - PIN8                      (input pullup).
- * PF9  - PIN9                      (input pullup).
- * PF10 - PIN10                     (input pullup).
- * PF11 - PIN11                     (input pullup).
- * PF12 - PIN12                     (input pullup).
- * PF13 - PIN13                     (input pullup).
- * PF14 - PIN14                     (input pullup).
- * PF15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_I2C2_SDA) | PIN_MODE_INPUT(GPIOF_I2C2_SCL) | PIN_MODE_INPUT(GPIOF_PIN2) | PIN_MODE_INPUT(GPIOF_PIN3) | PIN_MODE_INPUT(GPIOF_PIN4) | PIN_MODE_INPUT(GPIOF_PIN5) | PIN_MODE_INPUT(GPIOF_PIN6) | PIN_MODE_INPUT(GPIOF_PIN7) | PIN_MODE_INPUT(GPIOF_PIN8) | PIN_MODE_INPUT(GPIOF_PIN9) | PIN_MODE_INPUT(GPIOF_PIN10) | PIN_MODE_INPUT(GPIOF_PIN11) | PIN_MODE_INPUT(GPIOF_PIN12) | PIN_MODE_INPUT(GPIOF_PIN13) | PIN_MODE_INPUT(GPIOF_PIN14) | PIN_MODE_INPUT(GPIOF_PIN15))
-#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_I2C2_SDA) | PIN_OTYPE_PUSHPULL(GPIOF_I2C2_SCL) | PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
-#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_HIGH(GPIOF_I2C2_SDA) | PIN_OSPEED_HIGH(GPIOF_I2C2_SCL) | PIN_OSPEED_VERYLOW(GPIOF_PIN2) | PIN_OSPEED_VERYLOW(GPIOF_PIN3) | PIN_OSPEED_VERYLOW(GPIOF_PIN4) | PIN_OSPEED_VERYLOW(GPIOF_PIN5) | PIN_OSPEED_VERYLOW(GPIOF_PIN6) | PIN_OSPEED_VERYLOW(GPIOF_PIN7) | PIN_OSPEED_VERYLOW(GPIOF_PIN8) | PIN_OSPEED_VERYLOW(GPIOF_PIN9) | PIN_OSPEED_VERYLOW(GPIOF_PIN10) | PIN_OSPEED_VERYLOW(GPIOF_PIN11) | PIN_OSPEED_VERYLOW(GPIOF_PIN12) | PIN_OSPEED_VERYLOW(GPIOF_PIN13) | PIN_OSPEED_VERYLOW(GPIOF_PIN14) | PIN_OSPEED_VERYLOW(GPIOF_PIN15))
-#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_I2C2_SDA) | PIN_PUPDR_FLOATING(GPIOF_I2C2_SCL) | PIN_PUPDR_PULLUP(GPIOF_PIN2) | PIN_PUPDR_PULLUP(GPIOF_PIN3) | PIN_PUPDR_PULLUP(GPIOF_PIN4) | PIN_PUPDR_PULLUP(GPIOF_PIN5) | PIN_PUPDR_PULLUP(GPIOF_PIN6) | PIN_PUPDR_PULLUP(GPIOF_PIN7) | PIN_PUPDR_PULLUP(GPIOF_PIN8) | PIN_PUPDR_PULLUP(GPIOF_PIN9) | PIN_PUPDR_PULLUP(GPIOF_PIN10) | PIN_PUPDR_PULLUP(GPIOF_PIN11) | PIN_PUPDR_PULLUP(GPIOF_PIN12) | PIN_PUPDR_PULLUP(GPIOF_PIN13) | PIN_PUPDR_PULLUP(GPIOF_PIN14) | PIN_PUPDR_PULLUP(GPIOF_PIN15))
-#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_I2C2_SDA) | PIN_ODR_HIGH(GPIOF_I2C2_SCL) | PIN_ODR_HIGH(GPIOF_PIN2) | PIN_ODR_HIGH(GPIOF_PIN3) | PIN_ODR_HIGH(GPIOF_PIN4) | PIN_ODR_HIGH(GPIOF_PIN5) | PIN_ODR_HIGH(GPIOF_PIN6) | PIN_ODR_HIGH(GPIOF_PIN7) | PIN_ODR_HIGH(GPIOF_PIN8) | PIN_ODR_HIGH(GPIOF_PIN9) | PIN_ODR_HIGH(GPIOF_PIN10) | PIN_ODR_HIGH(GPIOF_PIN11) | PIN_ODR_HIGH(GPIOF_PIN12) | PIN_ODR_HIGH(GPIOF_PIN13) | PIN_ODR_HIGH(GPIOF_PIN14) | PIN_ODR_HIGH(GPIOF_PIN15))
-#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_I2C2_SDA, 0) | PIN_AFIO_AF(GPIOF_I2C2_SCL, 0) | PIN_AFIO_AF(GPIOF_PIN2, 0) | PIN_AFIO_AF(GPIOF_PIN3, 0) | PIN_AFIO_AF(GPIOF_PIN4, 0) | PIN_AFIO_AF(GPIOF_PIN5, 0) | PIN_AFIO_AF(GPIOF_PIN6, 0) | PIN_AFIO_AF(GPIOF_PIN7, 0))
-#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0) | PIN_AFIO_AF(GPIOF_PIN9, 0) | PIN_AFIO_AF(GPIOF_PIN10, 0) | PIN_AFIO_AF(GPIOF_PIN11, 0) | PIN_AFIO_AF(GPIOF_PIN12, 0) | PIN_AFIO_AF(GPIOF_PIN13, 0) | PIN_AFIO_AF(GPIOF_PIN14, 0) | PIN_AFIO_AF(GPIOF_PIN15, 0))
-
-/*
- * GPIOG setup:
- *
- * PG0  - PIN0                      (input pullup).
- * PG1  - PIN1                      (input pullup).
- * PG2  - PIN2                      (input pullup).
- * PG3  - PIN3                      (input pullup).
- * PG4  - PIN4                      (input pullup).
- * PG5  - PIN5                      (input pullup).
- * PG6  - PIN6                      (input pullup).
- * PG7  - PIN7                      (input pullup).
- * PG8  - PIN8                      (input pullup).
- * PG9  - PIN9                      (input pullup).
- * PG10 - PIN10                     (input pullup).
- * PG11 - PIN11                     (input pullup).
- * PG12 - PIN12                     (input pullup).
- * PG13 - PIN13                     (input pullup).
- * PG14 - PIN14                     (input pullup).
- * PG15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_PIN0) | PIN_MODE_INPUT(GPIOG_PIN1) | PIN_MODE_INPUT(GPIOG_PIN2) | PIN_MODE_INPUT(GPIOG_PIN3) | PIN_MODE_INPUT(GPIOG_PIN4) | PIN_MODE_INPUT(GPIOG_PIN5) | PIN_MODE_INPUT(GPIOG_PIN6) | PIN_MODE_INPUT(GPIOG_PIN7) | PIN_MODE_INPUT(GPIOG_PIN8) | PIN_MODE_INPUT(GPIOG_PIN9) | PIN_MODE_INPUT(GPIOG_PIN10) | PIN_MODE_INPUT(GPIOG_PIN11) | PIN_MODE_INPUT(GPIOG_PIN12) | PIN_MODE_INPUT(GPIOG_PIN13) | PIN_MODE_INPUT(GPIOG_PIN14) | PIN_MODE_INPUT(GPIOG_PIN15))
-#define VAL_GPIOG_OTYPER (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) | PIN_OTYPE_PUSHPULL(GPIOG_PIN1) | PIN_OTYPE_PUSHPULL(GPIOG_PIN2) | PIN_OTYPE_PUSHPULL(GPIOG_PIN3) | PIN_OTYPE_PUSHPULL(GPIOG_PIN4) | PIN_OTYPE_PUSHPULL(GPIOG_PIN5) | PIN_OTYPE_PUSHPULL(GPIOG_PIN6) | PIN_OTYPE_PUSHPULL(GPIOG_PIN7) | PIN_OTYPE_PUSHPULL(GPIOG_PIN8) | PIN_OTYPE_PUSHPULL(GPIOG_PIN9) | PIN_OTYPE_PUSHPULL(GPIOG_PIN10) | PIN_OTYPE_PUSHPULL(GPIOG_PIN11) | PIN_OTYPE_PUSHPULL(GPIOG_PIN12) | PIN_OTYPE_PUSHPULL(GPIOG_PIN13) | PIN_OTYPE_PUSHPULL(GPIOG_PIN14) | PIN_OTYPE_PUSHPULL(GPIOG_PIN15))
-#define VAL_GPIOG_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOG_PIN0) | PIN_OSPEED_VERYLOW(GPIOG_PIN1) | PIN_OSPEED_VERYLOW(GPIOG_PIN2) | PIN_OSPEED_VERYLOW(GPIOG_PIN3) | PIN_OSPEED_VERYLOW(GPIOG_PIN4) | PIN_OSPEED_VERYLOW(GPIOG_PIN5) | PIN_OSPEED_VERYLOW(GPIOG_PIN6) | PIN_OSPEED_VERYLOW(GPIOG_PIN7) | PIN_OSPEED_VERYLOW(GPIOG_PIN8) | PIN_OSPEED_VERYLOW(GPIOG_PIN9) | PIN_OSPEED_VERYLOW(GPIOG_PIN10) | PIN_OSPEED_VERYLOW(GPIOG_PIN11) | PIN_OSPEED_VERYLOW(GPIOG_PIN12) | PIN_OSPEED_VERYLOW(GPIOG_PIN13) | PIN_OSPEED_VERYLOW(GPIOG_PIN14) | PIN_OSPEED_VERYLOW(GPIOG_PIN15))
-#define VAL_GPIOG_PUPDR (PIN_PUPDR_PULLUP(GPIOG_PIN0) | PIN_PUPDR_PULLUP(GPIOG_PIN1) | PIN_PUPDR_PULLUP(GPIOG_PIN2) | PIN_PUPDR_PULLUP(GPIOG_PIN3) | PIN_PUPDR_PULLUP(GPIOG_PIN4) | PIN_PUPDR_PULLUP(GPIOG_PIN5) | PIN_PUPDR_PULLUP(GPIOG_PIN6) | PIN_PUPDR_PULLUP(GPIOG_PIN7) | PIN_PUPDR_PULLUP(GPIOG_PIN8) | PIN_PUPDR_PULLUP(GPIOG_PIN9) | PIN_PUPDR_PULLUP(GPIOG_PIN10) | PIN_PUPDR_PULLUP(GPIOG_PIN11) | PIN_PUPDR_PULLUP(GPIOG_PIN12) | PIN_PUPDR_PULLUP(GPIOG_PIN13) | PIN_PUPDR_PULLUP(GPIOG_PIN14) | PIN_PUPDR_PULLUP(GPIOG_PIN15))
-#define VAL_GPIOG_ODR (PIN_ODR_HIGH(GPIOG_PIN0) | PIN_ODR_HIGH(GPIOG_PIN1) | PIN_ODR_HIGH(GPIOG_PIN2) | PIN_ODR_HIGH(GPIOG_PIN3) | PIN_ODR_HIGH(GPIOG_PIN4) | PIN_ODR_HIGH(GPIOG_PIN5) | PIN_ODR_HIGH(GPIOG_PIN6) | PIN_ODR_HIGH(GPIOG_PIN7) | PIN_ODR_HIGH(GPIOG_PIN8) | PIN_ODR_HIGH(GPIOG_PIN9) | PIN_ODR_HIGH(GPIOG_PIN10) | PIN_ODR_HIGH(GPIOG_PIN11) | PIN_ODR_HIGH(GPIOG_PIN12) | PIN_ODR_HIGH(GPIOG_PIN13) | PIN_ODR_HIGH(GPIOG_PIN14) | PIN_ODR_HIGH(GPIOG_PIN15))
-#define VAL_GPIOG_AFRL (PIN_AFIO_AF(GPIOG_PIN0, 0) | PIN_AFIO_AF(GPIOG_PIN1, 0) | PIN_AFIO_AF(GPIOG_PIN2, 0) | PIN_AFIO_AF(GPIOG_PIN3, 0) | PIN_AFIO_AF(GPIOG_PIN4, 0) | PIN_AFIO_AF(GPIOG_PIN5, 0) | PIN_AFIO_AF(GPIOG_PIN6, 0) | PIN_AFIO_AF(GPIOG_PIN7, 0))
-#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_PIN8, 0) | PIN_AFIO_AF(GPIOG_PIN9, 0) | PIN_AFIO_AF(GPIOG_PIN10, 0) | PIN_AFIO_AF(GPIOG_PIN11, 0) | PIN_AFIO_AF(GPIOG_PIN12, 0) | PIN_AFIO_AF(GPIOG_PIN13, 0) | PIN_AFIO_AF(GPIOG_PIN14, 0) | PIN_AFIO_AF(GPIOG_PIN15, 0))
-
-/*
- * GPIOH setup:
- *
- * PH0  - PIN0                      (input pullup).
- * PH1  - PIN1                      (input pullup).
- * PH2  - PIN2                      (input pullup).
- * PH3  - PIN3                      (input pullup).
- * PH4  - PIN4                      (input pullup).
- * PH5  - PIN5                      (input pullup).
- * PH6  - PIN6                      (input pullup).
- * PH7  - PIN7                      (input pullup).
- * PH8  - PIN8                      (input pullup).
- * PH9  - PIN9                      (input pullup).
- * PH10 - PIN10                     (input pullup).
- * PH11 - PIN11                     (input pullup).
- * PH12 - PIN12                     (input pullup).
- * PH13 - PIN13                     (input pullup).
- * PH14 - PIN14                     (input pullup).
- * PH15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_PIN0) | PIN_MODE_INPUT(GPIOH_PIN1) | PIN_MODE_INPUT(GPIOH_PIN2) | PIN_MODE_INPUT(GPIOH_PIN3) | PIN_MODE_INPUT(GPIOH_PIN4) | PIN_MODE_INPUT(GPIOH_PIN5) | PIN_MODE_INPUT(GPIOH_PIN6) | PIN_MODE_INPUT(GPIOH_PIN7) | PIN_MODE_INPUT(GPIOH_PIN8) | PIN_MODE_INPUT(GPIOH_PIN9) | PIN_MODE_INPUT(GPIOH_PIN10) | PIN_MODE_INPUT(GPIOH_PIN11) | PIN_MODE_INPUT(GPIOH_PIN12) | PIN_MODE_INPUT(GPIOH_PIN13) | PIN_MODE_INPUT(GPIOH_PIN14) | PIN_MODE_INPUT(GPIOH_PIN15))
-#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_PIN0) | PIN_OTYPE_PUSHPULL(GPIOH_PIN1) | PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | PIN_OTYPE_PUSHPULL(GPIOH_PIN7) | PIN_OTYPE_PUSHPULL(GPIOH_PIN8) | PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | PIN_OTYPE_PUSHPULL(GPIOH_PIN15))
-#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOH_PIN0) | PIN_OSPEED_VERYLOW(GPIOH_PIN1) | PIN_OSPEED_VERYLOW(GPIOH_PIN2) | PIN_OSPEED_VERYLOW(GPIOH_PIN3) | PIN_OSPEED_VERYLOW(GPIOH_PIN4) | PIN_OSPEED_VERYLOW(GPIOH_PIN5) | PIN_OSPEED_VERYLOW(GPIOH_PIN6) | PIN_OSPEED_VERYLOW(GPIOH_PIN7) | PIN_OSPEED_VERYLOW(GPIOH_PIN8) | PIN_OSPEED_VERYLOW(GPIOH_PIN9) | PIN_OSPEED_VERYLOW(GPIOH_PIN10) | PIN_OSPEED_VERYLOW(GPIOH_PIN11) | PIN_OSPEED_VERYLOW(GPIOH_PIN12) | PIN_OSPEED_VERYLOW(GPIOH_PIN13) | PIN_OSPEED_VERYLOW(GPIOH_PIN14) | PIN_OSPEED_VERYLOW(GPIOH_PIN15))
-#define VAL_GPIOH_PUPDR (PIN_PUPDR_PULLUP(GPIOH_PIN0) | PIN_PUPDR_PULLUP(GPIOH_PIN1) | PIN_PUPDR_PULLUP(GPIOH_PIN2) | PIN_PUPDR_PULLUP(GPIOH_PIN3) | PIN_PUPDR_PULLUP(GPIOH_PIN4) | PIN_PUPDR_PULLUP(GPIOH_PIN5) | PIN_PUPDR_PULLUP(GPIOH_PIN6) | PIN_PUPDR_PULLUP(GPIOH_PIN7) | PIN_PUPDR_PULLUP(GPIOH_PIN8) | PIN_PUPDR_PULLUP(GPIOH_PIN9) | PIN_PUPDR_PULLUP(GPIOH_PIN10) | PIN_PUPDR_PULLUP(GPIOH_PIN11) | PIN_PUPDR_PULLUP(GPIOH_PIN12) | PIN_PUPDR_PULLUP(GPIOH_PIN13) | PIN_PUPDR_PULLUP(GPIOH_PIN14) | PIN_PUPDR_PULLUP(GPIOH_PIN15))
-#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_PIN0) | PIN_ODR_HIGH(GPIOH_PIN1) | PIN_ODR_HIGH(GPIOH_PIN2) | PIN_ODR_HIGH(GPIOH_PIN3) | PIN_ODR_HIGH(GPIOH_PIN4) | PIN_ODR_HIGH(GPIOH_PIN5) | PIN_ODR_HIGH(GPIOH_PIN6) | PIN_ODR_HIGH(GPIOH_PIN7) | PIN_ODR_HIGH(GPIOH_PIN8) | PIN_ODR_HIGH(GPIOH_PIN9) | PIN_ODR_HIGH(GPIOH_PIN10) | PIN_ODR_HIGH(GPIOH_PIN11) | PIN_ODR_HIGH(GPIOH_PIN12) | PIN_ODR_HIGH(GPIOH_PIN13) | PIN_ODR_HIGH(GPIOH_PIN14) | PIN_ODR_HIGH(GPIOH_PIN15))
-#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_PIN0, 0) | PIN_AFIO_AF(GPIOH_PIN1, 0) | PIN_AFIO_AF(GPIOH_PIN2, 0) | PIN_AFIO_AF(GPIOH_PIN3, 0) | PIN_AFIO_AF(GPIOH_PIN4, 0) | PIN_AFIO_AF(GPIOH_PIN5, 0) | PIN_AFIO_AF(GPIOH_PIN6, 0) | PIN_AFIO_AF(GPIOH_PIN7, 0))
-#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_PIN8, 0) | PIN_AFIO_AF(GPIOH_PIN9, 0) | PIN_AFIO_AF(GPIOH_PIN10, 0) | PIN_AFIO_AF(GPIOH_PIN11, 0) | PIN_AFIO_AF(GPIOH_PIN12, 0) | PIN_AFIO_AF(GPIOH_PIN13, 0) | PIN_AFIO_AF(GPIOH_PIN14, 0) | PIN_AFIO_AF(GPIOH_PIN15, 0))
-
-/*
- * USB bus activation macro, required by the USB driver.
- */
-// #define usb_lld_connect_bus(usbp)
-#define usb_lld_connect_bus(usbp) (palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_ALTERNATE(14)))
-// #define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT)
-/*
- * USB bus de-activation macro, required by the USB driver.
- */
-// #define usb_lld_disconnect_bus(usbp)
-#define usb_lld_disconnect_bus(usbp)                                \
-    (palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_OUTPUT_PUSHPULL)); \
-    palClearPad(GPIOA, GPIOA_USB_DP)
-// #define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12)
-
-#if !defined(_FROM_ASM_)
-#    ifdef __cplusplus
-extern "C" {
-#    endif
-void boardInit(void);
-#    ifdef __cplusplus
-}
-#    endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */

drivers/boards/GENERIC_STM32_F303XC/board.mk

@@ -1,5 +0,0 @@
-# List of all the board related files.
-BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC/board.c
-
-# Required include directories
-BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC

drivers/boards/IC_TEENSY_3_1/board.mk

@@ -1,5 +0,0 @@
-# List of all the board related files.
-BOARDSRC = $(BOARD_PATH)/boards/IC_TEENSY_3_1/board.c
-
-# Required include directories
-BOARDINC = $(BOARD_PATH)/boards/IC_TEENSY_3_1

drivers/boards/STM32_F103_STM32DUINO/board.mk

@@ -1,5 +0,0 @@
-# List of all the board related files.
-BOARDSRC = $(BOARD_PATH)/boards/STM32_F103_STM32DUINO/board.c
-
-# Required include directories
-BOARDINC = $(BOARD_PATH)/boards/STM32_F103_STM32DUINO

drivers/chibios/ws2812_pwm.c

@@ -23,6 +23,9 @@
 #ifndef WS2812_DMA_CHANNEL
 #    define WS2812_DMA_CHANNEL 2  // DMA Channel for TIMx_UP
 #endif
+#if (STM32_DMA_SUPPORTS_DMAMUX == TRUE) && !defined(WS2812_DMAMUX_ID)
+#    error "please consult your MCU's datasheet and specify in your config.h: #define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM?_UP"
+#endif
 
 // Push Pull or Open Drain Configuration
 // Default Push Pull
@@ -177,13 +180,18 @@ void ws2812_init(void) {
 
     // Configure DMA
     // dmaInit(); // Joe added this
-    dmaStreamAlloc(WS2812_DMA_STREAM - STM32_DMA1_STREAM1, 10, NULL, NULL);
+    dmaStreamAlloc(WS2812_DMA_STREAM - STM32_DMA_STREAM(0), 10, NULL, NULL);
     dmaStreamSetPeripheral(WS2812_DMA_STREAM, &(WS2812_PWM_DRIVER.tim->CCR[WS2812_PWM_CHANNEL - 1]));  // Ziel ist der An-Zeit im Cap-Comp-Register
     dmaStreamSetMemory0(WS2812_DMA_STREAM, ws2812_frame_buffer);
     dmaStreamSetTransactionSize(WS2812_DMA_STREAM, WS2812_BIT_N);
     dmaStreamSetMode(WS2812_DMA_STREAM, STM32_DMA_CR_CHSEL(WS2812_DMA_CHANNEL) | STM32_DMA_CR_DIR_M2P | STM32_DMA_CR_PSIZE_WORD | STM32_DMA_CR_MSIZE_WORD | STM32_DMA_CR_MINC | STM32_DMA_CR_CIRC | STM32_DMA_CR_PL(3));
     // M2P: Memory 2 Periph; PL: Priority Level
 
+#if (STM32_DMA_SUPPORTS_DMAMUX == TRUE)
+    // If the MCU has a DMAMUX we need to assign the correct resource
+    dmaSetRequestSource(WS2812_DMA_STREAM, WS2812_DMAMUX_ID);
+#endif
+
     // Start DMA
     dmaStreamEnable(WS2812_DMA_STREAM);
 

drivers/oled/oled_driver.c

@@ -444,6 +444,14 @@ void oled_pan(bool left) {
     oled_dirty = ~((OLED_BLOCK_TYPE)0);
 }
 
+oled_buffer_reader_t oled_read_raw(uint16_t start_index) {
+    if (start_index > OLED_MATRIX_SIZE) start_index = OLED_MATRIX_SIZE;
+    oled_buffer_reader_t ret_reader;
+    ret_reader.current_element = &oled_buffer[start_index];
+    ret_reader.remaining_element_count = OLED_MATRIX_SIZE - start_index;
+    return ret_reader;
+}
+
 void oled_write_raw_byte(const char data, uint16_t index) {
     if (index > OLED_MATRIX_SIZE) index = OLED_MATRIX_SIZE;
     if (oled_buffer[index] == data) return;

drivers/oled/oled_driver.h

@@ -154,6 +154,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define OLED_I2C_TIMEOUT 100
 #endif
 
+typedef struct __attribute__((__packed__)) {
+    uint8_t  *current_element;
+    uint16_t remaining_element_count;
+} oled_buffer_reader_t;
+
 // OLED Rotation enum values are flags
 typedef enum {
     OLED_ROTATION_0   = 0,
@@ -207,6 +212,10 @@ void oled_write_ln(const char *data, bool invert);
 // Pans the buffer to the right (or left by passing true) by moving contents of the buffer
 void oled_pan(bool left);
 
+// Returns a pointer to the requested start index in the buffer plus remaining
+// buffer length as struct
+oled_buffer_reader_t oled_read_raw(uint16_t start_index);
+
 void oled_write_raw(const char *data, uint16_t size);
 void oled_write_raw_byte(const char data, uint16_t index);
 

keyboards/1upkeyboards/sweet16/v1/rules.mk

@@ -14,4 +14,4 @@ BOOTLOADER = caterina
 RGBLIGHT_ENABLE = yes
 BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
 
-LINK_TIME_OPTIMIZATION_ENABLE = yes
+LTO_ENABLE = yes

keyboards/1upkeyboards/sweet16/v2/promicro/rules.mk

@@ -18,4 +18,4 @@ CONSOLE_ENABLE = yes
 RGBLIGHT_ENABLE = no
 ENCODER_ENABLE = yes
 
-LINK_TIME_OPTIMIZATION_ENABLE = yes
+LTO_ENABLE = yes

keyboards/anavi/macropad8/rules.mk

@@ -23,7 +23,6 @@ NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: ht
 BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
 MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = yes        # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.
 OLED_DRIVER_ENABLE = yes     # Enable Support for SSD1306 or SH1106 OLED Displays; Communicating over I2C

keyboards/ashpil/modelm_usbc/keymaps/ashpil/keymap.c

@@ -36,7 +36,7 @@ combo_t key_combos[COMBO_COUNT] = {
   [CTRL_PAUS_RESET] = COMBO_ACTION(reset_combo),
 };
 
-void process_combo_event(uint8_t combo_index, bool pressed) {
+void process_combo_event(uint16_t combo_index, bool pressed) {
   switch(combo_index) {
     case CTRL_PAUS_RESET:
       if (pressed) {

keyboards/bm60rgb/rules.mk

@@ -31,7 +31,7 @@ BLUETOOTH_ENABLE = no        # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no            # Audio output on port C6
 FAUXCLICKY_ENABLE = no       # Use buzzer to emulate clicky switches
 RGB_MATRIX_ENABLE = WS2812
-LINK_TIME_OPTIMIZATION_ENABLE = yes
+LTO_ENABLE = yes
 
 # partially generated by KBFirmware JSON to QMK Parser
 # https://noroadsleft.github.io/kbf_qmk_converter/

keyboards/cannonkeys/ortho48/rules.mk

@@ -2,7 +2,6 @@
 MCU = STM32F103
 
 # GENERIC STM32F103C8T6 board - stm32duino bootloader
-OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
 MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
 BOARD = STM32_F103_STM32DUINO
 

keyboards/cannonkeys/ortho60/rules.mk

@@ -2,7 +2,6 @@
 MCU = STM32F103
 
 # GENERIC STM32F103C8T6 board - stm32duino bootloader
-OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
 MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
 BOARD = STM32_F103_STM32DUINO
 

keyboards/cannonkeys/ortho75/rules.mk

@@ -2,7 +2,6 @@
 MCU = STM32F103
 
 # GENERIC STM32F103C8T6 board - stm32duino bootloader
-OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
 MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
 BOARD = STM32_F103_STM32DUINO
 

keyboards/cannonkeys/practice60/rules.mk

@@ -2,7 +2,6 @@
 MCU = STM32F103
 
 # GENERIC STM32F103C8T6 board - stm32duino bootloader
-OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
 MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
 BOARD = STM32_F103_STM32DUINO
 

keyboards/cannonkeys/practice65/rules.mk

@@ -2,7 +2,6 @@
 MCU = STM32F103
 
 # GENERIC STM32F103C8T6 board - stm32duino bootloader
-OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
 MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
 BOARD = STM32_F103_STM32DUINO
 

keyboards/claw44/ssd1306.c

@@ -4,9 +4,6 @@
 #include "i2c.h"
 #include <string.h>
 #include "print.h"
-#ifdef ADAFRUIT_BLE_ENABLE
-#include "adafruit_ble.h"
-#endif
 #ifdef PROTOCOL_LUFA
 #include "lufa.h"
 #endif

keyboards/clueboard/66/keymaps/via/rules.mk

@@ -1,4 +1,4 @@
 # rules.mk overrides to enable VIA
 
 VIA_ENABLE = yes
-LINK_TIME_OPTIMIZATION_ENABLE = yes
+LTO_ENABLE = yes

keyboards/clueboard/card/rules.mk

@@ -26,4 +26,4 @@ UNICODE_ENABLE = no        # Unicode
 BLUETOOTH_ENABLE = no      # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = yes         # Audio output on port C6
 
-LINK_TIME_OPTIMIZATION_ENABLE = yes
+LTO_ENABLE = yes

keyboards/comet46/ssd1306.c

@@ -4,9 +4,6 @@
 #include "i2c.h"
 #include <string.h>
 #include "print.h"
-#ifdef ADAFRUIT_BLE_ENABLE
-#include "adafruit_ble.h"
-#endif
 #ifdef PROTOCOL_LUFA
 #include "lufa.h"
 #endif

keyboards/converter/siemens_tastatur/rules.mk

@@ -2,7 +2,6 @@
 MCU = STM32F103
 
 # GENERIC STM32F103C8T6 board - stm32duino bootloader
-OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
 MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
 BOARD = STM32_F103_STM32DUINO
 

keyboards/converter/usb_usb/keymaps/chriskopher/combo.c

@@ -33,7 +33,7 @@ combo_t key_combos[COMBO_COUNT] = {
 };
 
 // Called after a combo event is triggered
-void process_combo_event(uint8_t combo_index, bool pressed) {
+void process_combo_event(uint16_t combo_index, bool pressed) {
     switch (combo_index) {
         case SD_LAYER_COMBO:
             if (pressed) {

keyboards/converter/usb_usb/keymaps/chriskopher/rules.mk

@@ -19,6 +19,6 @@ EXTRAKEY_ENABLE = yes # Used for audio control and system control keys
 COMBO_ENABLE = yes # Used to allow chording of keys to trigger an action
 TAP_DANCE_ENABLE = yes # Used to allow multiple taps of a key to perform different actions
 
-LINK_TIME_OPTIMIZATION_ENABLE = yes # Reduces the compiled firmware size
+LTO_ENABLE = yes # Reduces the compiled firmware size
 
 SRC += combo.c tap_dance.c

keyboards/converter/usb_usb/keymaps/narze/keymap.c

@@ -130,17 +130,17 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 
         // 1. Hold for LGUI, tap for Underscore
         case GUI_UNDS:
-            perform_space_cadet(record, KC_LGUI, KC_LSFT, KC_MINS);
+            perform_space_cadet(record, keycode, KC_LGUI, KC_LSFT, KC_MINS);
             return false;
 
         // 2. Hold for LSHIFT, tap for Parens open
         case LSFT_LPRN:
-            perform_space_cadet(record, KC_LSFT, KC_LSFT, KC_9);
+            perform_space_cadet(record, keycode, KC_LSFT, KC_LSFT, KC_9);
             return false;
 
         // 3. Hold for RSHIFT, tap for Parens close
         case RSFT_RPRN:
-            perform_space_cadet(record, KC_RSFT, KC_RSFT, KC_0);
+            perform_space_cadet(record, keycode, KC_RSFT, KC_RSFT, KC_0);
             return false;
 
         default:
@@ -153,7 +153,7 @@ void matrix_setup(void) {
     set_superduper_key_combos();
 }
 
-void process_combo_event(uint8_t combo_index, bool pressed) {
+void process_combo_event(uint16_t combo_index, bool pressed) {
     if (pressed) {
         switch(combo_index) {
             case CB_SUPERDUPER:

keyboards/crkbd/keymaps/ninjonas/rules.mk

@@ -1,7 +1,7 @@
 RGB_MATRIX_ENABLE = WS2812
 MOUSEKEY_ENABLE = no
 OLED_DRIVER_ENABLE = yes
-LINK_TIME_OPTIMIZATION_ENABLE = yes
+LTO_ENABLE = yes
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

keyboards/crkbd/keymaps/rpbaptist/rules.mk

@@ -1,5 +1,5 @@
 #This enables Link Time Optimization.This can save a good chunk of space(several KB for me), but the macro and function... functions cause it to error out.
-LINK_TIME_OPTIMIZATION_ENABLE = yes
+LTO_ENABLE = yes
 
 #Build Options
 #change to "no" to disable the options, or define them in the Makefile in

keyboards/crkbd/ssd1306.c

@@ -4,9 +4,6 @@
 #include "i2c.h"
 #include <string.h>
 #include "print.h"
-#ifdef ADAFRUIT_BLE_ENABLE
-#include "adafruit_ble.h"
-#endif
 #ifdef PROTOCOL_LUFA
 #include "lufa.h"
 #endif

keyboards/dz60/keymaps/via/rules.mk

@@ -1,2 +1,2 @@
-LINK_TIME_OPTIMIZATION_ENABLE = yes
+LTO_ENABLE = yes
 VIA_ENABLE = yes

keyboards/dztech/dz60rgb/keymaps/xunz/rules.mk

@@ -1,5 +1,4 @@
 NKRO_ENABLE = yes                 # USB Nkey Rollover
 # VELOCIKEY_ENABLE = yes
 
-LINK_TIME_OPTIMIZATION_ENABLE = yes
+LTO_ENABLE = yes
-

keyboards/dztech/dz65rgb/keymaps/chocol8/rules.mk

@@ -2,5 +2,4 @@ NKRO_ENABLE = yes            # USB Nkey Rollover
 VELOCIKEY_ENABLE = yes
 # AUTO_SHIFT_ENABLE = yes      # Auto Shift
 
-LINK_TIME_OPTIMIZATION_ENABLE = yes
+LTO_ENABLE = yes
-

keyboards/dztech/dz65rgb/keymaps/matthewrobo/rules.mk

@@ -2,5 +2,4 @@ NKRO_ENABLE = yes                 # USB Nkey Rollover
 AUTO_SHIFT_ENABLE = yes      # Auto Shift
 # VELOCIKEY_ENABLE = yes
 
-LINK_TIME_OPTIMIZATION_ENABLE = yes
+LTO_ENABLE = yes
-

keyboards/e88/config.h

@@ -0,0 +1,108 @@
+/* Copyright 2019 Maarten Dekkers <maartenwut@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x4705
+#define PRODUCT_ID      0x0187
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Pink Labs
+#define PRODUCT         e88
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 17
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B7, D7, B4, C6, B5, B6 }
+#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, D0, D1, D2, D3, B3, B2, B1, E6, D5, D6, D4 }
+
+#define UNUSED_PINS {B0}
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+#define QMK_ESC_OUTPUT F0 // usually COL
+#define QMK_ESC_INPUT B7 // usually ROW

keyboards/e88/e88.c

@@ -0,0 +1,16 @@
+/* Copyright 2019 Maarten Dekkers <maartenwut@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "e88.h"

keyboards/e88/e88.h

@@ -0,0 +1,45 @@
+/* Copyright 2019 Maarten Dekkers <maartenwut@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+#define XXX KC_NO
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+
+#define LAYOUT_all( \
+    k00,      k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c,      k1d, k1e, k1f, k1g, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d,      k2e, k2f, k2g, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d,                     \
+    k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d,           k4f,      \
+    k50, k51, k52,                k56,                k5a, k5b, k5c, k5d,      k5e, k5f, k5g  \
+) \
+{ \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, XXX, XXX, XXX }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, XXX, k4f, XXX }, \
+    { k50, k51, k52, XXX, XXX, XXX, k56, XXX, XXX, XXX, k5a, k5b, k5c, k5d, k5e, k5f, k5g }  \
+}

keyboards/e88/info.json

@@ -0,0 +1,109 @@
+{
+    "keyboard_name": "e88",
+    "url": "",
+    "maintainer": "2-n",
+    "width": 18.25,
+    "height": 6.25,
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                {"x": 0, "y": 0},
+                {"x": 1.25, "y": 0},
+                {"x": 2.25, "y": 0},
+                {"x": 3.25, "y": 0},
+                {"x": 4.25, "y": 0},
+                {"x": 5.5, "y": 0},
+                {"x": 6.5, "y": 0},
+                {"x": 7.5, "y": 0},
+                {"x": 8.5, "y": 0},
+                {"x": 9.75, "y": 0},
+                {"x": 10.75, "y": 0},
+                {"x": 11.75, "y": 0},
+                {"x": 12.75, "y": 0},
+                {"x": 14, "y": 0},
+                {"x": 15.25, "y": 0},
+                {"x": 16.25, "y": 0},
+                {"x": 17.25, "y": 0},
+                
+                {"x": 0, "y": 1.25},
+                {"x": 1, "y": 1.25},
+                {"x": 2, "y": 1.25},
+                {"x": 3, "y": 1.25},
+                {"x": 4, "y": 1.25},
+                {"x": 5, "y": 1.25},
+                {"x": 6, "y": 1.25},
+                {"x": 7, "y": 1.25},
+                {"x": 8, "y": 1.25},
+                {"x": 9, "y": 1.25},
+                {"x": 10, "y": 1.25},
+                {"x": 11, "y": 1.25},
+                {"x": 12, "y": 1.25},
+                {"x": 13, "y": 1.25, "w": 2},
+                {"x": 15.25, "y": 1.25},
+                {"x": 16.25, "y": 1.25},
+                {"x": 17.25, "y": 1.25},
+                
+                {"x": 0, "y": 2.25, "w": 1.5},
+                {"x": 1.5, "y": 2.25},
+                {"x": 2.5, "y": 2.25},
+                {"x": 3.5, "y": 2.25},
+                {"x": 4.5, "y": 2.25},
+                {"x": 5.5, "y": 2.25},
+                {"x": 6.5, "y": 2.25},
+                {"x": 7.5, "y": 2.25},
+                {"x": 8.5, "y": 2.25},
+                {"x": 9.5, "y": 2.25},
+                {"x": 10.5, "y": 2.25},
+                {"x": 11.5, "y": 2.25},
+                {"x": 12.5, "y": 2.25},
+                {"x": 13.5, "y": 2.25, "w": 1.5},
+                {"x": 15.25, "y": 2.25},
+                {"x": 16.25, "y": 2.25},
+                {"x": 17.25, "y": 2.25},
+                
+                {"x": 0, "y": 3.25, "w": 1.75},
+                {"x": 1.75, "y": 3.25},
+                {"x": 2.75, "y": 3.25},
+                {"x": 3.75, "y": 3.25},
+                {"x": 4.75, "y": 3.25},
+                {"x": 5.75, "y": 3.25},
+                {"x": 6.75, "y": 3.25},
+                {"x": 7.75, "y": 3.25},
+                {"x": 8.75, "y": 3.25},
+                {"x": 9.75, "y": 3.25},
+                {"x": 10.75, "y": 3.25},
+                {"x": 11.75, "y": 3.25},
+                {"x": 12.75, "y": 3.25},
+                {"x": 13.75, "y": 3.25, "w": 1.25},
+                
+                {"x": 0, "y": 4.25, "w": 1.25},
+                {"x": 1.25, "y": 4.25},
+                {"x": 2.25, "y": 4.25},
+                {"x": 3.25, "y": 4.25},
+                {"x": 4.25, "y": 4.25},
+                {"x": 5.25, "y": 4.25},
+                {"x": 6.25, "y": 4.25},
+                {"x": 7.25, "y": 4.25},
+                {"x": 8.25, "y": 4.25},
+                {"x": 9.25, "y": 4.25},
+                {"x": 10.25, "y": 4.25},
+                {"x": 11.25, "y": 4.25},
+                {"x": 12.25, "y": 4.25, "w": 1.75},
+                {"x": 14, "y": 4.25},
+                {"x": 16.25, "y": 4.25},
+                
+                {"x": 0, "y": 5.25, "w": 1.25},
+                {"x": 1.25, "y": 5.25, "w": 1.25},
+                {"x": 2.5, "y": 5.25, "w": 1.25},
+                {"x": 3.75, "y": 5.25, "w": 6.25},
+                {"x": 10, "y": 5.25, "w": 1.25},
+                {"x": 11.25, "y": 5.25, "w": 1.25},
+                {"x": 12.5, "y": 5.25, "w": 1.25},
+                {"x": 13.75, "y": 5.25, "w": 1.25},
+                {"x": 15.25, "y": 5.25},
+                {"x": 16.25, "y": 5.25},
+                {"x": 17.25, "y": 5.25}
+            ]
+        }
+    }
+}

keyboards/e88/keymaps/default/keymap.c

@@ -0,0 +1,40 @@
+/* Copyright 2019 Maarten Dekkers <maartenwut@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _MA, //Main layer
+    _FN  //Function layer
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_MA] = LAYOUT_all(
+    KC_ESC,             KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   KC_LGUI,    KC_PSCR,  KC_SLCK,  KC_PAUS,
+    KC_GRV,   KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_MINS,  KC_EQL,             KC_BSPC,    KC_INS,   KC_HOME,  KC_PGUP,
+    KC_TAB,   KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,     KC_LBRC,  KC_RBRC,            KC_BSLS,    KC_DEL,   KC_END,   KC_PGDN,
+    KC_LCTL,  KC_A,     KC_S,     KC_D,     KC_F,     KC_G,     KC_H,     KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,  KC_BSLS,            KC_ENT,
+    KC_LSFT,  KC_NUBS,  KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,            KC_RSFT,  MO(_FN),              KC_UP,
+    KC_LCTL,  KC_LGUI,  KC_LALT,                                KC_SPC,                                           KC_RALT,  KC_RALT,  RESET,   KC_RCTRL,   KC_LEFT,  KC_DOWN,  KC_RGHT),
+[_FN] = LAYOUT_all(
+    RESET,             _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,    _______,   _______,  _______,
+    _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,            _______,    KC_VOLD,   KC_MUTE,  KC_VOLU,
+    _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,            _______,    KC_MPRV,   KC_MPLY,  KC_MNXT,
+    _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,            _______,
+    _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,            _______,  _______,               _______,
+    _______,  _______,  _______,                                _______,                                          _______,  _______,  _______,  _______,    _______,   _______,  _______),
+
+};

keyboards/e88/keymaps/default/readme.md

@@ -0,0 +1 @@
+Default e88 firmware.

keyboards/e88/readme.md

@@ -0,0 +1,19 @@
+# e88
+
+![pink labs logo](https://cdn.shopify.com/s/files/1/0302/4198/0548/files/logo_x60.png?v=1579122787)
+
+A tenkeyless PCB featuring the DK Saver layout, as designed for the Bliss keyboard by Pink Labs.
+
+* Maintainer: [elli](https://github.com/2-n)
+* Hardware Supported: e88 f13 PCB (proto and final rev)
+* Hardware Availability: [labs.pink](http://www.labs.pink/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make e88:default
+
+Flashing example for this keyboard:
+
+    make e88:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/e88/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = qmk-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output

keyboards/ergodox_ez/keymaps/hacker_dvorak/rules.mk

@@ -1,7 +1,7 @@
 # Set any rules.mk overrides for your specific keymap here.
 # See rules at https://docs.qmk.fm/#/config_options?id=the-rulesmk-file
 
-LINK_TIME_OPTIMIZATION_ENABLE = yes
+LTO_ENABLE = yes
 NKRO_ENABLE      = yes  # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 TAP_DANCE_ENABLE = yes
 MOUSEKEY_ENABLE  = yes  # Mouse keys(+4700b).

keyboards/ergodox_ez/keymaps/nathanvercaemert/rules.mk

@@ -1,6 +1,6 @@
 # Set any rules.mk overrides for your specific keymap here.
 # See rules at https://docs.qmk.fm/#/config_options?id=the-rulesmk-file
-LINK_TIME_OPTIMIZATION_ENABLE = yes
+LTO_ENABLE = yes
 COMMAND_ENABLE = no
 RGBLIGHT_ENABLE = no
 TAP_DANCE_ENABLE=yes

keyboards/ergodox_infinity/bootloader_defs.h

@@ -1 +0,0 @@
-#define KIIBOHD_BOOTLOADER

keyboards/ergodox_infinity/keymaps/narze/keymap.c

@@ -635,17 +635,17 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 
         // 1. Hold for LGUI, tap for Underscore
         case GUI_UNDS:
-            perform_space_cadet(record, KC_LGUI, KC_LSFT, KC_MINS);
+            perform_space_cadet(record, keycode, KC_LGUI, KC_LSFT, KC_MINS);
             return false;
 
         // 2. Hold for LSHIFT, tap for Parens open
         case LSFT_LPRN:
-            perform_space_cadet(record, KC_LSFT, KC_LSFT, KC_9);
+            perform_space_cadet(record, keycode, KC_LSFT, KC_LSFT, KC_9);
             return false;
 
         // 3. Hold for RSHIFT, tap for Parens close
         case RSFT_RPRN:
-            perform_space_cadet(record, KC_RSFT, KC_RSFT, KC_0);
+            perform_space_cadet(record, keycode, KC_RSFT, KC_RSFT, KC_0);
             return false;
 
     }
@@ -683,7 +683,7 @@ void matrix_scan_user(void) {
 
 // Combos
 
-void process_combo_event(uint8_t combo_index, bool pressed) {
+void process_combo_event(uint16_t combo_index, bool pressed) {
     if (pressed) {
         switch(combo_index) {
             case CB_SUPERDUPER:

keyboards/ergodox_infinity/rules.mk

@@ -1,32 +1,12 @@
 # MCU name
 MCU = MK20DX256
 
-# Linker script to use
+# Bootloader selection
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+BOOTLOADER = kiibohd
-#   or <this_dir>/ld/
-# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
-# - LDSCRIPT =
-#   - MKL26Z64 for Teensy LC
-#   - MK20DX128 for Teensy 3.0
-#   - MK20DX256 for Teensy 3.1 and 3.2
-#   - MK20DX128BLDR4 for Infinity 60% with Kiibohd bootloader
-#   - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader
-MCU_LDSCRIPT = MK20DX256BLDR8
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000
-
-BOOTLOADER = dfu
 
 # Build Options
 #   comment out to disable the options.
 #
-
-DFU_ARGS = -d 1c11:b007
-DFU_SUFFIX_ARGS = -p b007 -v 1c11
-
 BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration
 MOUSEKEY_ENABLE  = yes # Mouse keys
 EXTRAKEY_ENABLE  = yes # Audio control and System control

keyboards/flehrad/bigswitch/README.md

@@ -7,6 +7,8 @@ Designed by Don of the Board Podcast and sold as a kit by [keeb.io](https://keeb
 
 https://github.com/flehrad/Big-Switch-PCB
 
+make: flehrad/bigswitch:default
+
 ### Technical Specifications
 
  * Uses a atmega32u4 pro micro or pin compatible MCU