Made windows driver installation accept y as All to allow CI (#8189)

* Made windows driver installation accept y as all to allow CI

* Fix some formatting

* Made None default

docs/ja/cli.md

@@ -1,8 +1,8 @@
 # QMK CLI
 
 <!---
-  original document: 2fe288d01:docs/cli.md
-  git diff 2fe288d01 HEAD -- docs/cli.md | cat
+  original document: 79e6b7866:docs/cli.md
+  git diff 79e6b7866 HEAD -- docs/cli.md | cat
 -->
 
 このページは QMK CLI のセットアップと使用方法について説明します。
@@ -257,6 +257,16 @@ $ qmk kle2json -f kle.txt -f
 qmk list-keyboards
 ```
 
+## `qmk list-keymaps`
+
+このコマンドは指定されたキーボード(とリビジョン)の全てのキーマップをリスト化します。
+
+**使用法**:
+
+```
+qmk list-keymaps -kb planck/ez
+```
+
 ## `qmk new-keymap`
 
 このコマンドは、キーボードの既存のデフォルトのキーマップに基づいて新しいキーマップを作成します。

keyboards/40percentclub/gherkin/keymaps/default/keymap.c

@@ -1,21 +1,54 @@
 #include QMK_KEYBOARD_H
 
-#define FN1_Q LT(1, KC_Q)
+#define FN1_SPC     LT(1, KC_SPC)
+#define FN2_BSPC    LT(2, KC_BSPC)
+#define FN3_C       LT(3, KC_C)
+#define FN4_V       LT(4, KC_V)
+#define FN5_B       LT(5, KC_B)
+#define CTL_Z       CTL_T(KC_Z)
+#define ALT_X       ALT_T(KC_X)
+#define ALT_N       ALGR_T(KC_N)
+#define CTL_M       RCTL_T(KC_M)
+#define SFT_ENT     RSFT_T(KC_ENT)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   [0] = LAYOUT_ortho_3x10(
-    FN1_Q,   KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,
+    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,
     KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_ESC,
-    KC_Z,    KC_X,    KC_C,    KC_V,    KC_BSPC, KC_SPC,  KC_B,    KC_N,    KC_M,    KC_ENT
+    CTL_Z,   ALT_X,   FN3_C,   FN4_V,   FN2_BSPC,FN1_SPC, FN5_B,   ALT_N,   CTL_M,   SFT_ENT
   ),
 
   [1] = LAYOUT_ortho_3x10(
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_INC,
-    _______, _______, _______, _______, _______, _______, RESET,   _______, _______, BL_DEC
+    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,
+    KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,
+    _______, _______, _______, _______, KC_DEL,  _______, _______, _______, _______, _______
   ),
 
+  [2] = LAYOUT_ortho_3x10(
+    KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN,
+    KC_F11,  KC_F12,  _______, _______, _______, _______, _______, _______, _______, KC_GRV,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+  ),
+
+  [3] = LAYOUT_ortho_3x10(
+    _______, _______, _______, _______, _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+    KC_TAB,  _______, _______, _______, _______, KC_COMM, KC_DOT,  KC_SLSH, KC_SCLN, KC_QUOT,
+    _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+  ),
+
+  [4] = LAYOUT_ortho_3x10(
+    _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
+    KC_TAB,  _______, _______, _______, _______, KC_LABK, KC_RABK, KC_QUES, KC_COLN, KC_DQUO,
+    _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END
+  ),
+
+  [5] = LAYOUT_ortho_3x10(
+    KC_CALC, KC_WHOM, KC_MAIL, KC_MYCM, _______, _______, _______, _______, _______, KC_PSCR,
+    _______, _______, _______, _______, _______, _______, _______, _______, BL_DEC,  BL_INC,
+    _______, _______, _______, _______, RESET,   _______, _______, _______, _______, _______
+  )
+
 };
 
 void keyboard_pre_init_user(void) {

keyboards/acheron/austin/austin.c

@@ -0,0 +1,18 @@
+#include "austin.h"
+
+void keyboard_pre_init_kb(void) {
+    setPinOutput(A0);
+    setPinOutput(A1);
+    setPinOutput(A2);
+
+    keyboard_pre_init_user();
+}
+
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(A2, led_state.num_lock);
+        writePin(A0, led_state.caps_lock);
+        writePin(A1, led_state.scroll_lock);
+    }
+    return true;
+}

keyboards/acheron/austin/austin.h

@@ -0,0 +1,21 @@
+#pragma once
+
+#include "quantum.h"
+
+#define ___ KC_NO
+
+#define LAYOUT_all( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,       K0E,  K0F, K0G, K0H, K0I, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E,  K1F,  K1G, K1H, K1I, K5I, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,       K2E,  K2F, K2G, K2H, K3I, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C,            K3E,  K3F, K3G, K3H,      \
+    K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C,   K4D,           K4F, K4G, K4H, K4I, \
+    K50, K51, K52,                K55,                K59, K5A,   K5B, K5C, K5E,      K5F, K5G, K5H       \
+) { \
+    {  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I  }, \
+    {  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I  }, \
+    {  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, ___  }, \
+    {  K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, ___, K3E, K3F, K3G, K3H, K3I  }, \
+    {  K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, ___, K4F, K4G, K4H, K4I  }, \
+    {  K50, K51, K52, ___, ___, K55, ___, ___, ___, K59, K5A, K5B, K5C, ___, K5E, K5F, K5G, K5H, K5I  } \
+}

keyboards/acheron/austin/chconf.h

@@ -0,0 +1,520 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         FALSE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  FALSE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     FALSE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 FALSE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */

keyboards/acheron/austin/config.h

@@ -0,0 +1,71 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x0159
+#define PRODUCT_ID      0xA71C
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    DriftMechanics
+#define PRODUCT         Austin
+#define DESCRIPTION     Austin Keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 19
+
+#define MATRIX_COL_PINS { B10, B11, B12, B13, B14, B15, A8, A9, A10, A5, A15, B3, B4, B5, B8, A3, C15, C14, F1 }
+#define MATRIX_ROW_PINS { C13, A4, A7, B0, B1, B2 }
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN           A6
+#define BACKLIGHT_PWM_DRIVER    PWMD3
+#define BACKLIGHT_PWM_CHANNEL   1
+#define BACKLIGHT_PAL_MODE      1
+#define BACKLIGHT_LEVELS 6
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 6
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/acheron/austin/halconf.h

@@ -0,0 +1,354 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 TRUE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 TRUE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 TRUE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     1
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */

keyboards/acheron/austin/info.json

@@ -0,0 +1,124 @@
+{
+    "keyboard_name": "Austin",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 19.75,
+    "height": 5.25,
+    "layouts": {
+        "LAYOUT_all": {
+            "key_count": 105,
+            "layout": [
+                {"label":"Esc", "x":0, "y":0},
+                {"label":"F1", "x":1.25, "y":0},
+                {"label":"F2", "x":2.25, "y":0},
+                {"label":"F3", "x":3.25, "y":0},
+                {"label":"F4", "x":4.25, "y":0},
+                {"label":"F5", "x":5.5, "y":0},
+                {"label":"F6", "x":6.5, "y":0},
+                {"label":"F7", "x":7.5, "y":0},
+                {"label":"F8", "x":8.5, "y":0},
+                {"label":"F9", "x":9.75, "y":0},
+                {"label":"F10", "x":10.75, "y":0},
+                {"label":"F11", "x":11.75, "y":0},
+                {"label":"F12", "x":12.75, "y":0},
+                {"label":"Print Screen", "x":14, "y":0},
+                {"label":"Scroll Lock", "x":15.25, "y":0},
+                {"label":"Pause", "x":16.5, "y":0},
+                {"label":"Home", "x":17.5, "y":0},
+                {"label":"End", "x":18.5, "y":0},
+                {"label":"Delete", "x":19.5, "y":0},
+
+                {"label":"`", "x":0, "y":1.25},
+                {"label":"1", "x":1, "y":1.25},
+                {"label":"2", "x":2, "y":1.25},
+                {"label":"3", "x":3, "y":1.25},
+                {"label":"4", "x":4, "y":1.25},
+                {"label":"5", "x":5, "y":1.25},
+                {"label":"6", "x":6, "y":1.25},
+                {"label":"7", "x":7, "y":1.25},
+                {"label":"8", "x":8, "y":1.25},
+                {"label":"9", "x":9, "y":1.25},
+                {"label":"0", "x":10, "y":1.25},
+                {"label":"-", "x":11, "y":1.25},
+                {"label":"=", "x":12, "y":1.25},
+                {"label":"Backspace", "x":13, "y":1.25},
+                {"label":"Backspace", "x":14, "y":1.25},
+                {"label":"Insert", "x":15.25, "y":1.25},
+                {"label":"Num Lock", "x":16.5, "y":1.25},
+                {"label":"/", "x":17.5, "y":1.25},
+                {"label":"*", "x":18.5, "y":1.25},
+                {"label":"-", "x":19.5, "y":1.25},
+
+                {"label":"Tab", "x":0, "y":2.25, "w":1.5},
+                {"label":"Q", "x":1.5, "y":2.25},
+                {"label":"W", "x":2.5, "y":2.25},
+                {"label":"E", "x":3.5, "y":2.25},
+                {"label":"R", "x":4.5, "y":2.25},
+                {"label":"T", "x":5.5, "y":2.25},
+                {"label":"Y", "x":6.5, "y":2.25},
+                {"label":"U", "x":7.5, "y":2.25},
+                {"label":"I", "x":8.5, "y":2.25},
+                {"label":"O", "x":9.5, "y":2.25},
+                {"label":"P", "x":10.5, "y":2.25},
+                {"label":"[", "x":11.5, "y":2.25},
+                {"label":"]", "x":12.5, "y":2.25},
+                {"label":"\\", "x":13.5, "y":2.25, "w":1.5},
+                {"label":"Page Up", "x":15.25, "y":2.25},
+                {"label":"7", "x":16.5, "y":2.25},
+                {"label":"8", "x":17.5, "y":2.25},
+                {"label":"9", "x":18.5, "y":2.25},
+                {"label":"+", "x":19.5, "y":2.25, "h":2},
+
+                {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75},
+                {"label":"A", "x":1.75, "y":3.25},
+                {"label":"S", "x":2.75, "y":3.25},
+                {"label":"D", "x":3.75, "y":3.25},
+                {"label":"F", "x":4.75, "y":3.25},
+                {"label":"G", "x":5.75, "y":3.25},
+                {"label":"H", "x":6.75, "y":3.25},
+                {"label":"J", "x":7.75, "y":3.25},
+                {"label":"K", "x":8.75, "y":3.25},
+                {"label":"L", "x":9.75, "y":3.25},
+                {"label":";", "x":10.75, "y":3.25},
+                {"label":"'", "x":11.75, "y":3.25},
+                {"label":"Enter", "x":12.75, "y":3.25, "w":2.25},
+                {"label":"Page Down", "x":15.25, "y":3.25},
+                {"label":"4", "x":16.5, "y":3.25},
+                {"label":"5", "x":17.5, "y":3.25},
+                {"label":"6", "x":18.5, "y":3.25},
+
+                {"label":"Shift", "x":0, "y":4.25, "w":1.25},
+                {"label":"ISO \\", "x":1.25, "y":4.25},
+                {"label":"Z", "x":2.25, "y":4.25},
+                {"label":"X", "x":3.25, "y":4.25},
+                {"label":"C", "x":4.25, "y":4.25},
+                {"label":"V", "x":5.25, "y":4.25},
+                {"label":"B", "x":6.25, "y":4.25},
+                {"label":"N", "x":7.25, "y":4.25},
+                {"label":"M", "x":8.25, "y":4.25},
+                {"label":",", "x":9.25, "y":4.25},
+                {"label":".", "x":10.25, "y":4.25},
+                {"label":"/", "x":11.25, "y":4.25},
+                {"label":"Shift", "x":12.25, "y":4.25, "w":1.75},
+                {"label":"Up", "x":14.25, "y":4.5},
+                {"label":"1", "x":16.5, "y":4.25},
+                {"label":"2", "x":17.5, "y":4.25},
+                {"label":"3", "x":18.5, "y":4.25},
+                {"label":"Enter", "x":19.5, "y":4.25, "h":2},
+
+                {"label":"Ctrl", "x":0, "y":5.25, "w":1.25},
+                {"label":"GUI", "x":1.25, "y":5.25, "w":1.25},
+                {"label":"Alt", "x":2.5, "y":5.25, "w":1.25},
+                {"label":"Space", "x":3.75, "y":5.25, "w":6.25},
+                {"label":"Alt", "x":10, "y":5.25, "w":1.5},
+                {"label":"Ctrl", "x":11.5, "y":5.25, "w":1.5},
+                {"label":"Left", "x":13.25, "y":5.5},
+                {"label":"Down", "x":14.25, "y":5.5},
+                {"label":"Right", "x":15.25, "y":5.5},
+                {"label":"0", "x":16.5, "y":5.25},
+                {"label":"0", "x":17.5, "y":5.25},
+                {"label":".", "x":18.5, "y":5.25}
+            ]
+        }
+    }
+}

keyboards/acheron/austin/keymaps/default/keymap.c

@@ -0,0 +1,28 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+   [0] = LAYOUT_all(
+        KC_ESC , KC_F1  , KC_F2  , KC_F3  , KC_F4  , KC_F5  , KC_F6  , KC_F7  , KC_F8  , KC_F9  , KC_F10 , KC_F11 , KC_F12 , KC_PSCR,            KC_SLCK,   KC_PAUS, KC_HOME, KC_END , KC_DEL ,
+        KC_GRV , KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , KC_BSPC, KC_BSPC,   KC_INS ,   KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_LBRC, KC_RBRC, KC_BSLS,            KC_PGUP,   KC_P7  , KC_P8  , KC_P9  , KC_PPLS,
+        KC_CAPS, KC_A   , KC_S   , KC_D   , KC_F   , KC_G   , KC_H   , KC_J   , KC_K   , KC_L   , KC_SCLN, KC_QUOT, KC_ENT ,                     KC_PGDN,   KC_P4  , KC_P5  , KC_P6  , 
+        KC_LSFT, KC_LSFT, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT,   KC_UP  ,                     KC_P1  , KC_P2  , KC_P3  , KC_PENT,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC ,                            KC_RALT, KC_RCTL,   KC_LEFT, KC_DOWN, KC_RGHT,            KC_P0  , KC_P0  , KC_PDOT  
+    )
+};

keyboards/acheron/austin/keymaps/via/keymap.c

@@ -0,0 +1,55 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+   [0] = LAYOUT_all(
+        KC_ESC , KC_F1  , KC_F2  , KC_F3  , KC_F4  , KC_F5  , KC_F6  , KC_F7  , KC_F8  , KC_F9  , KC_F10 , KC_F11 , KC_F12 , KC_PSCR,            KC_SLCK,   KC_PAUS, KC_HOME, KC_END , KC_DEL ,
+        KC_GRV , KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , KC_BSPC, KC_BSPC,   KC_INS ,   KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_LBRC, KC_RBRC, KC_BSLS,            KC_PGUP,   KC_P7  , KC_P8  , KC_P9  , KC_PPLS,
+        KC_CAPS, KC_A   , KC_S   , KC_D   , KC_F   , KC_G   , KC_H   , KC_J   , KC_K   , KC_L   , KC_SCLN, KC_QUOT, KC_ENT ,                     KC_PGDN,   KC_P4  , KC_P5  , KC_P6  , 
+        KC_LSFT, KC_LSFT, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT,   KC_UP  ,                     KC_P1  , KC_P2  , KC_P3  , KC_PENT,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC ,                            KC_RALT, KC_RCTL,   KC_LEFT, KC_DOWN, KC_RGHT,            KC_P0  , KC_P0  , KC_PDOT  
+    ),
+
+   [1] = LAYOUT_all(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,            _______,   _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,   _______,   _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,            _______,   _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                     _______,   _______, _______, _______, 
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                       _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                            _______, _______, _______, _______, _______,              _______, _______, _______
+    ),
+
+  [2] = LAYOUT_all(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,            _______,   _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,   _______,   _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,            _______,   _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                     _______,   _______, _______, _______, 
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                       _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                            _______, _______, _______, _______, _______,              _______, _______, _______
+  ),
+
+  [3] = LAYOUT_all(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,            _______,   _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,   _______,   _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,            _______,   _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                     _______,   _______, _______, _______, 
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                       _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                            _______, _______, _______, _______, _______,              _______, _______, _______
+  )
+};

keyboards/acheron/austin/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/acheron/austin/mcuconf.h

@@ -0,0 +1,176 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+// #define STM32F070xB
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_HSI14_ENABLED                 TRUE
+#define STM32_HSI48_ENABLED                 FALSE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE                          STM32_PPRE_DIV1
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_USBSW                         STM32_USBSW_HSI48
+#define STM32_CECSW                         STM32_CECSW_HSI
+#define STM32_I2C1SW                        STM32_I2C1SW_HSI
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         2
+#define STM32_GPT_TIM2_IRQ_PRIORITY         2
+#define STM32_GPT_TIM3_IRQ_PRIORITY         2
+#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  TRUE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_I2C2_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         3
+#define STM32_ICU_TIM2_IRQ_PRIORITY         3
+#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  TRUE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         3
+#define STM32_PWM_TIM2_IRQ_PRIORITY         3
+#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        3
+#define STM32_SERIAL_USART2_PRIORITY        3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  TRUE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      3
+
+#endif /* _MCUCONF_H_ */

keyboards/acheron/austin/readme.md

@@ -0,0 +1,29 @@
+# Acheron Aχξρων 1800CP-SM-S-STM32-MX-TH-WI (codename "Austin") QMK firmware
+
+<p align="center">
+  <img align="middle" src="https://raw.githubusercontent.com/Gondolindrim/acheronLibrary/master/graphics/acheronLong.png"  width="400"> 
+</p>
+
+## Introduction
+
+This is the QMK firmware repository for the Austin, updated until [revision Alpha](https://github.com/Gondolindrim/Austin/releases/tag/Alpha).
+
+The AustinPCB is an Open-Hardware guidelines compliant PCB which files can be found at [this link](https://github.com/Gondolindrim/Austin). Its designer and maintainer is [Gondolindrim](https://github.com/Gondolindrim).
+
+The Austin keyboard is a collaboration between Gondolindrim, DriftingBunnies from DriftMechanics and PheonixStarr from Nightingale Studios.
+
+See the [IC page](https://geekhack.org/index.php?topic=100883) and the [GB page](https://geekhack.org/index.php?topic=102542) for further information. The GB was the only known way to obtain an Austin from the official vendor.
+
+## PCB Documentation
+
+See the [AcheronDocs](https://gondolindrim.github.io/AcheronDocs/austin/intro.html) page for the AustinPCB full documentation. You can also check the KiCad PCB files at the [Austin GitHub repository](https://github.com/Gondolindrim/Austin).
+
+Before using the files for personal or commercial use, please read the [Acheron Open-Hardware License V1.2](https://gondolindrim.github.io/AcheronDocs/license/license.html) under which the Austin PCB is published.
+
+## How to compile
+
+After setting up your build environment, you can compile the Austin default keymap by using:
+
+    make acheron/austin:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/acheron/austin/rules.mk

@@ -0,0 +1,25 @@
+# MCU name
+MCU = STM32F072
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
+
+# Enter lower-power sleep mode when on the ChibiOS idle thread
+OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

keyboards/centromere/info.json

@@ -0,0 +1,55 @@
+{
+    "keyboard_name": "Centromere",
+    "url": "",
+    "maintainer": "spe2",
+    "width": 14,
+    "height": 4,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"Tab", "x":0, "y":0.25},
+                {"label":"Q", "x":1, "y":0.25},
+                {"label":"W", "x":2, "y":0.125},
+                {"label":"E", "x":3, "y":0},
+                {"label":"R", "x":4, "y":0.125},
+                {"label":"T", "x":5, "y":0.25},
+                {"label":"Y", "x":8, "y":0.25},
+                {"label":"U", "x":9, "y":0.125},
+                {"label":"I", "x":10, "y":0},
+                {"label":"O", "x":11, "y":0.125},
+                {"label":"P", "x":12, "y":0.25},
+                {"label":"Backspace", "x":13, "y":0.25},
+                {"label":"LCtrl", "x":0, "y":1.25},
+                {"label":"A", "x":1, "y":1.25},
+                {"label":"S", "x":2, "y":1.125},
+                {"label":"D", "x":3, "y":1},
+                {"label":"F", "x":4, "y":1.125},
+                {"label":"G", "x":5, "y":1.25},
+                {"label":"H", "x":8, "y":1.25},
+                {"label":"J", "x":9, "y":1.125},
+                {"label":"K", "x":10, "y":1},
+                {"label":"L", "x":11, "y":1.125},
+                {"label":";", "x":12, "y":1.25},
+                {"label":"'", "x":13, "y":1.25},
+                {"label":"Shift", "x":0, "y":2.25},
+                {"label":"Z", "x":1, "y":2.25},
+                {"label":"X", "x":2, "y":2.125},
+                {"label":"C", "x":3, "y":2},
+                {"label":"V", "x":4, "y":2.125},
+                {"label":"B", "x":5, "y":2.25},
+                {"label":"N", "x":8, "y":2.25},
+                {"label":"M", "x":9, "y":2.125},
+                {"label":",", "x":10, "y":2},
+                {"label":".", "x":11, "y":2.125},
+                {"label":"/", "x":12, "y":2.25},
+                {"label":"Enter", "x":13, "y":2.25},
+                {"label":"LGUI", "x":3.5, "y":3.125},
+                {"label":"MO(_FN)", "x":4.5, "y":3.25},
+                {"label":"Space", "x":5.5, "y":3.375},
+                {"label":"Space", "x":7.5, "y":3.375},
+                {"label":"MO(_NUM)", "x":8.5, "y":3.25},
+                {"label":"RAlt", "x":9.5, "y":3.125}
+            ]
+        }
+    }
+}

keyboards/centromere/readme.md

@@ -1 +1,15 @@
-QMK Firmware for the Centromere keyboard. Centromere is a custom wireless ergonomic keyboard, with 6x3 columnar staggered keys and a 3 key thumb cluster. Centromere keyboards can utilize hot-swap Kailh sockets for MX switches, and either Choc or MX switches can be permanently soldered. There are two types of receiver that use two different MCU for the Centromere board, and you can define which one you are using by defining your rules.mk file appropriately, as shown in the default keymaps.
+# Centromere
+
+![Centromere](https://i.redd.it/sg9unjs9y9041.jpg)
+
+Centromere is a custom wireless ergonomic keyboard, with 6x3 columnar staggered keys and a 3 key thumb cluster. Centromere keyboards can utilize hot-swap Kailh sockets for MX switches, and either Choc or MX switches can be permanently soldered. There are two types of receiver that use two different MCU for the Centromere board, and you can define which one you are using by defining your rules.mk file appropriately, as shown in the default keymaps.
+
+* Keyboard Maintainer: [spe2](https://github.com/spe2)
+* Hardware Supported: Centromere PCBs
+* Hardware Availability: [Southpaw Design](https://southpawdesign.net/products/centromere-group-buy)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make centromere:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/mxss/mxss_frontled.c

@@ -183,7 +183,14 @@ void fled_val_increase(void)
 
     // Update stored config
     fled_update_conf();
-    rgblight_set();
+
+    // Update and set LED state
+    if (fled_mode == FLED_INDI) {
+        fled_layer_update(layer_state);
+        fled_lock_update(host_keyboard_led_state());
+    } else {
+        rgblight_set();
+    }
 }
 
 void fled_val_decrease(void)
@@ -196,7 +203,14 @@ void fled_val_decrease(void)
 
     // Update stored config
     fled_update_conf();
-    rgblight_set();
+
+    // Update and set LED state
+    if (fled_mode == FLED_INDI) {
+        fled_layer_update(layer_state);
+        fled_lock_update(host_keyboard_led_state());
+    } else {
+        rgblight_set();
+    }
 }
 
 void fled_layer_update(layer_state_t state) {

keyboards/mxss/rgblight.c

@@ -182,6 +182,10 @@ void eeconfig_update_rgblight(uint32_t val) {
 #endif
 }
 
+void eeconfig_update_rgblight_current(void) {
+    eeconfig_update_rgblight(rgblight_config.raw);
+}
+
 void eeconfig_update_rgblight_default(void) {
     rgblight_config.enable = 1;
     rgblight_config.mode   = RGBLIGHT_MODE_STATIC_LIGHT;
@@ -533,6 +537,22 @@ void rgblight_sethsv(uint8_t hue, uint8_t sat, uint8_t val) { rgblight_sethsv_ee
 
 void rgblight_sethsv_noeeprom(uint8_t hue, uint8_t sat, uint8_t val) { rgblight_sethsv_eeprom_helper(hue, sat, val, false); }
 
+uint8_t rgblight_get_speed(void) { return rgblight_config.speed; }
+
+void rgblight_set_speed_eeprom_helper(uint8_t speed, bool write_to_eeprom) {
+    rgblight_config.speed = speed;
+    if (write_to_eeprom) {
+        eeconfig_update_rgblight(rgblight_config.raw);   // EECONFIG needs to be increased to support this
+        dprintf("rgblight set speed [EEPROM]: %u\n", rgblight_config.speed);
+    } else {
+        dprintf("rgblight set speed [NOEEPROM]: %u\n", rgblight_config.speed);
+    }
+}
+
+void rgblight_set_speed(uint8_t speed) { rgblight_set_speed_eeprom_helper(speed, true); }
+
+void rgblight_set_speed_noeeprom(uint8_t speed) { rgblight_set_speed_eeprom_helper(speed, false); }
+
 uint8_t rgblight_get_hue(void) { return rgblight_config.hue; }
 
 uint8_t rgblight_get_sat(void) { return rgblight_config.sat; }

keyboards/mxss/rgblight.h

@@ -233,6 +233,11 @@ void rgblight_decrease_speed(void);
 void rgblight_sethsv(uint8_t hue, uint8_t sat, uint8_t val);
 void rgblight_sethsv_noeeprom(uint8_t hue, uint8_t sat, uint8_t val);
 
+/*   effect speed */
+uint8_t rgblight_get_speed(void);
+void rgblight_set_speed(uint8_t speed);
+void rgblight_set_speed_noeeprom(uint8_t speed);
+
 /*       query */
 uint8_t rgblight_get_mode(void);
 uint8_t rgblight_get_hue(void);
@@ -245,6 +250,7 @@ uint32_t rgblight_read_dword(void);
 void     rgblight_update_dword(uint32_t dword);
 uint32_t eeconfig_read_rgblight(void);
 void     eeconfig_update_rgblight(uint32_t val);
+void     eeconfig_update_rgblight_current(void);
 void     eeconfig_update_rgblight_default(void);
 void     eeconfig_debug_rgblight(void);
 

keyboards/reviung41/readme.md

@@ -1,6 +1,6 @@
 # reviung41
 
-![reviung41](https://github.com/gtips/reviung/blob/master/reviung41/image/REVIUNG41-prototype.jpg)
+![reviung41](https://github.com/gtips/reviung/blob/master/reviung41/image/reviung41-01.jpg)
 
 The REVIUNG41 is 41-key column staggered keyboard.
 

lib/python/milc.py

@@ -273,7 +273,7 @@ class MILC(object):
         self._inside_context_manager = False
         self.ansi = ansi_colors
         self.arg_only = []
-        self.config = None
+        self.config = self.config_source = None
         self.config_file = None
         self.default_arguments = {}
         self.version = 'unknown'
@@ -473,6 +473,7 @@ class MILC(object):
         """
         self.acquire_lock()
         self.config = Configuration()
+        self.config_source = Configuration()
         self.config_file = self.find_config_file()
 
         if self.config_file and self.config_file.exists():
@@ -498,6 +499,7 @@ class MILC(object):
                             value = int(value)
 
                     self.config[section][option] = value
+                    self.config_source[section][option] = 'config_file'
 
         self.release_lock()
 
@@ -530,12 +532,14 @@ class MILC(object):
                     arg_value = getattr(self.args, argument)
                     if arg_value is not None:
                         self.config[section][argument] = arg_value
+                        self.config_source[section][argument] = 'argument'
                 else:
                     if argument not in self.config[entrypoint_name]:
                         # Check if the argument exist for this section
                         arg = getattr(self.args, argument)
                         if arg is not None:
                             self.config[section][argument] = arg
+                            self.config_source[section][argument] = 'argument'
 
         self.release_lock()
 

lib/python/qmk/cli/compile.py

@@ -3,16 +3,12 @@
 You can compile a keymap already in the repo or using a QMK Configurator export.
 """
 import subprocess
-import os
 from argparse import FileType
 
 from milc import cli
-from qmk.commands import create_make_command
-from qmk.commands import parse_configurator_json
-from qmk.commands import compile_configurator_json
 
-import qmk.keymap
 import qmk.path
+from qmk.commands import compile_configurator_json, create_make_command, find_keyboard_keymap, parse_configurator_json
 
 
 @cli.argument('filename', nargs='?', arg_only=True, type=FileType('r'), help='The configurator export to compile')
@@ -24,99 +20,28 @@ def compile(cli):
 
     If a Configurator export is supplied this command will create a new keymap, overwriting an existing keymap if one exists.
 
-    FIXME(skullydazed): add code to check and warn if the keymap already exists
-
-    If --keyboard and --keymap are provided this command will build a firmware based on that.
-
+    If a keyboard and keymap are provided this command will build a firmware based on that.
     """
-    # Set CWD as directory command was issued from
-    cwd = os.environ['ORIG_CWD']
-    qmk_path = os.getcwd()
-    current_folder = os.path.basename(cwd)
-    # Initialize boolean to check for being in a keyboard directory and initialize keyboard string
-    in_keyboard = False
-    in_layout = False
-    keyboard = ""
-    keymap = ""
-    user_keymap = ""
-    user_keyboard = ""
-
-    # Set path for '/keyboards/' directory
-    keyboards_path = os.path.join(qmk_path, "keyboards")
-    layouts_path = os.path.join(qmk_path, "layouts")
-
-    # If below 'keyboards' and not in 'keyboards' or 'keymaps', get current keyboard name
-    if cwd.startswith(keyboards_path):
-        if current_folder != "keyboards" and current_folder != "keymaps":
-            if os.path.basename(os.path.abspath(os.path.join(cwd, ".."))) == "keymaps":
-                # If in a keymap folder, set relative path, get everything before /keymaps, and the keymap name
-                relative_path = cwd[len(keyboards_path):][1:]
-                keyboard = str(relative_path).split("/keymaps", 1)[0]
-                keymap = str(relative_path.rsplit("/", 1)[-1])
-            else:
-                keyboard = str(cwd[len(keyboards_path):])[1:]
-
-            in_keyboard = True
-
-    # If in layouts dir
-    if cwd.startswith(layouts_path):
-        if current_folder != "layouts":
-            in_layout = True
-
-    # If user keyboard/keymap or compile keyboard/keymap are supplied, assign those
-    if cli.config.compile.keyboard:
-        user_keyboard = cli.config.compile.keyboard
-    if cli.config.compile.keymap and not in_layout:
-        user_keymap = cli.config.compile.keymap
-
     if cli.args.filename:
-        # Parse the configurator json
+        # If a configurator JSON was provided skip straight to compiling it
+        # FIXME(skullydazed): add code to check and warn if the keymap already exists when compiling a json keymap.
         user_keymap = parse_configurator_json(cli.args.filename)
-
-        # Generate the keymap
         keymap_path = qmk.path.keymap(user_keymap['keyboard'])
-        cli.log.info('Creating {fg_cyan}%s{style_reset_all} keymap in {fg_cyan}%s', user_keymap['keymap'], keymap_path)
-
-        # Compile the keymap
         command = compile_configurator_json(user_keymap)
 
         cli.log.info('Wrote keymap to {fg_cyan}%s/%s/keymap.c', keymap_path, user_keymap['keymap'])
 
-    elif user_keyboard and user_keymap:
-        # Generate the make command for a specific keyboard/keymap.
-        command = create_make_command(user_keyboard, user_keymap)
-
-    elif in_keyboard:
-        keyboard = user_keyboard if user_keyboard else keyboard
-        keymap = user_keymap if user_keymap else keymap
-
-        if not os.path.exists(os.path.join(keyboards_path, keyboard, "rules.mk")):
-            cli.log.error('This directory does not contain a rules.mk file. Change directory or supply --keyboard with optional --keymap')
-            return False
-
-        # Get path for keyboard directory
-        keymap_path = qmk.path.keymap(keyboard)
-
-        # Check for global keymap config first
-        if keymap:
-            command = create_make_command(keyboard, keymap)
-
-        else:
-            # If no default keymap exists and none provided
-            cli.log.error('This directory does not contain a keymap. Set one with `qmk config` or supply `--keymap` ')
-            return False
-
-    elif in_layout:
-        if user_keyboard:
-            keymap = current_folder
-            command = create_make_command(user_keyboard, keymap)
-        else:
-            cli.log.error('You must supply a keyboard to compile a layout keymap. Set one with `qmk config` or supply `--keyboard` ')
-            return False
-
     else:
-        cli.log.error('You must supply a configurator export, both `--keyboard` and `--keymap`, or be in a directory for a keyboard or keymap.')
-        return False
+        # Perform the action the user specified
+        user_keyboard, user_keymap = find_keyboard_keymap()
+        if user_keyboard and user_keymap:
+            # Generate the make command for a specific keyboard/keymap.
+            command = create_make_command(user_keyboard, user_keymap)
+
+        else:
+            cli.log.error('You must supply a configurator export, both `--keyboard` and `--keymap`, or be in a directory for a keyboard or keymap.')
+            cli.echo('usage: qmk compile [-h] [-b] [-kb KEYBOARD] [-km KEYMAP] [filename]')
+            return False
 
     cli.log.info('Compiling keymap with {fg_cyan}%s\n\n', ' '.join(command))
     subprocess.run(command)

lib/python/qmk/cli/flash.py

@@ -8,7 +8,7 @@ from argparse import FileType
 
 import qmk.path
 from milc import cli
-from qmk.commands import compile_configurator_json, create_make_command, parse_configurator_json
+from qmk.commands import compile_configurator_json, create_make_command, find_keyboard_keymap, parse_configurator_json
 
 
 def print_bootloader_help():
@@ -45,39 +45,31 @@ def flash(cli):
     If bootloader is omitted, the one according to the rules.mk will be used.
 
     """
-    command = []
     if cli.args.bootloaders:
         # Provide usage and list bootloaders
         cli.echo('usage: qmk flash [-h] [-b] [-kb KEYBOARD] [-km KEYMAP] [-bl BOOTLOADER] [filename]')
         print_bootloader_help()
         return False
 
-    elif cli.config.flash.keymap and not cli.config.flash.keyboard:
-        # If only a keymap was given but no keyboard, suggest listing keyboards
-        cli.echo('usage: qmk flash [-h] [-b] [-kb KEYBOARD] [-km KEYMAP] [-bl BOOTLOADER] [filename]')
-        cli.log.error('run \'qmk list_keyboards\' to find out the supported keyboards')
-        return False
-
-    elif cli.args.filename:
-        # Get keymap path to log info
+    if cli.args.filename:
+        # Handle compiling a configurator JSON
         user_keymap = parse_configurator_json(cli.args.filename)
         keymap_path = qmk.path.keymap(user_keymap['keyboard'])
-
-        cli.log.info('Creating {fg_cyan}%s{style_reset_all} keymap in {fg_cyan}%s', user_keymap['keymap'], keymap_path)
-
-        # Convert the JSON into a C file and write it to disk.
         command = compile_configurator_json(user_keymap, cli.args.bootloader)
 
         cli.log.info('Wrote keymap to {fg_cyan}%s/%s/keymap.c', keymap_path, user_keymap['keymap'])
 
-    elif cli.config.flash.keyboard and cli.config.flash.keymap:
-        # Generate the make command for a specific keyboard/keymap.
-        command = create_make_command(cli.config.flash.keyboard, cli.config.flash.keymap, cli.args.bootloader)
-
     else:
-        cli.echo('usage: qmk flash [-h] [-b] [-kb KEYBOARD] [-km KEYMAP] [-bl BOOTLOADER] [filename]')
-        cli.log.error('You must supply a configurator export or both `--keyboard` and `--keymap`. You can also specify a bootloader with --bootloader. Use --bootloaders to list the available bootloaders.')
-        return False
+        # Perform the action the user specified
+        user_keyboard, user_keymap = find_keyboard_keymap()
+        if user_keyboard and user_keymap:
+            # Generate the make command for a specific keyboard/keymap.
+            command = create_make_command(user_keyboard, user_keymap, cli.args.bootloader)
+
+        else:
+            cli.log.error('You must supply a configurator export or both `--keyboard` and `--keymap`.')
+            cli.echo('usage: qmk flash [-h] [-b] [-kb KEYBOARD] [-km KEYMAP] [-bl BOOTLOADER] [filename]')
+            return False
 
     cli.log.info('Flashing keymap with {fg_cyan}%s\n\n', ' '.join(command))
     subprocess.run(command)

lib/python/qmk/cli/json/keymap.py

@@ -1,14 +1,15 @@
 """Generate a keymap.c from a configurator export.
 """
 import json
-import os
+from pathlib import Path
 
 from milc import cli
 
 import qmk.keymap
+import qmk.path
 
 
-@cli.argument('-o', '--output', arg_only=True, help='File to write to')
+@cli.argument('-o', '--output', arg_only=True, type=Path, help='File to write to')
 @cli.argument('-q', '--quiet', arg_only=True, action='store_true', help="Quiet mode, only output error messages")
 @cli.argument('filename', arg_only=True, help='Configurator JSON file')
 @cli.subcommand('Creates a keymap.c from a QMK Configurator export.')
@@ -17,13 +18,17 @@ def json_keymap(cli):
 
     This command uses the `qmk.keymap` module to generate a keymap.c from a configurator export. The generated keymap is written to stdout, or to a file if -o is provided.
     """
+    cli.args.filename = qmk.path.normpath(cli.args.filename)
+
     # Error checking
-    if cli.args.filename == ('-'):
-        cli.log.error('Reading from STDIN is not (yet) supported.')
+    if not cli.args.filename.exists():
+        cli.log.error('JSON file does not exist!')
         cli.print_usage()
         exit(1)
-    if not os.path.exists(qmk.path.normpath(cli.args.filename)):
-        cli.log.error('JSON file does not exist!')
+
+    if str(cli.args.filename) == '-':
+        # TODO(skullydazed/anyone): Read file contents from STDIN
+        cli.log.error('Reading from STDIN is not (yet) supported.')
         cli.print_usage()
         exit(1)
 
@@ -32,21 +37,17 @@ def json_keymap(cli):
         cli.args.output = None
 
     # Parse the configurator json
-    with open(qmk.path.normpath(cli.args.filename), 'r') as fd:
+    with cli.args.filename.open('r') as fd:
         user_keymap = json.load(fd)
 
     # Generate the keymap
     keymap_c = qmk.keymap.generate(user_keymap['keyboard'], user_keymap['layout'], user_keymap['layers'])
 
     if cli.args.output:
-        output_dir = os.path.dirname(cli.args.output)
-
-        if not os.path.exists(output_dir):
-            os.makedirs(output_dir)
-
-        output_file = qmk.path.normpath(cli.args.output)
-        with open(output_file, 'w') as keymap_fd:
-            keymap_fd.write(keymap_c)
+        cli.args.output.parent.mkdir(parents=True, exist_ok=True)
+        if cli.args.output.exists():
+            cli.args.output.replace(cli.args.output.name + '.bak')
+        cli.args.output.write_text(keymap_c)
 
         if not cli.args.quiet:
             cli.log.info('Wrote keymap to %s.', cli.args.output)

lib/python/qmk/cli/list/keyboards.py

@@ -1,5 +1,6 @@
 """List the keyboards currently defined within QMK
 """
+# We avoid pathlib here because this is performance critical code.
 import os
 import glob
 

lib/python/qmk/cli/new/keymap.py

@@ -1,8 +1,9 @@
 """This script automates the copying of the default keymap into your own keymap.
 """
-import os
 import shutil
+from pathlib import Path
 
+import qmk.path
 from milc import cli
 
 
@@ -17,24 +18,27 @@ def new_keymap(cli):
     keymap = cli.config.new_keymap.keymap if cli.config.new_keymap.keymap else input("Keymap Name: ")
 
     # generate keymap paths
-    kb_path = os.path.join(os.getcwd(), "keyboards", keyboard)
-    keymap_path_default = os.path.join(kb_path, "keymaps/default")
-    keymap_path = os.path.join(kb_path, "keymaps/%s" % keymap)
+    kb_path = Path('keyboards') / keyboard
+    keymap_path = qmk.path.keymap(keyboard)
+    keymap_path_default = keymap_path / 'default'
+    keymap_path_new = keymap_path / keymap
 
     # check directories
-    if not os.path.exists(kb_path):
+    if not kb_path.exists():
         cli.log.error('Keyboard %s does not exist!', kb_path)
         exit(1)
-    if not os.path.exists(keymap_path_default):
+
+    if not keymap_path_default.exists():
         cli.log.error('Keyboard default %s does not exist!', keymap_path_default)
         exit(1)
-    if os.path.exists(keymap_path):
-        cli.log.error('Keymap %s already exists!', keymap_path)
+
+    if keymap_path_new.exists():
+        cli.log.error('Keymap %s already exists!', keymap_path_new)
         exit(1)
 
     # create user directory with default keymap files
-    shutil.copytree(keymap_path_default, keymap_path, symlinks=True)
+    shutil.copytree(str(keymap_path_default), str(keymap_path_new), symlinks=True)
 
     # end message to user
-    cli.log.info("%s keymap directory created in: %s", keymap, keymap_path)
-    cli.log.info("Compile a firmware with your new keymap by typing: \n" + "qmk compile -kb %s -km %s", keyboard, keymap)
+    cli.log.info("%s keymap directory created in: %s", keymap, keymap_path_new)
+    cli.log.info("Compile a firmware with your new keymap by typing: \n\n\tqmk compile -kb %s -km %s\n", keyboard, keymap)

lib/python/qmk/commands.py

@@ -1,13 +1,19 @@
-"""Functions that build make commands
+"""Helper functions for commands.
 """
 import json
+from pathlib import Path
+
+from milc import cli
+
 import qmk.keymap
+from qmk.path import is_keyboard, is_keymap_dir, under_qmk_firmware
 
 
 def create_make_command(keyboard, keymap, target=None):
     """Create a make compile command
 
     Args:
+
         keyboard
             The path of the keyboard, for example 'plank'
 
@@ -18,24 +24,22 @@ def create_make_command(keyboard, keymap, target=None):
             Usually a bootloader.
 
     Returns:
+
         A command that can be run to make the specified keyboard and keymap
     """
-    if target is None:
-        return ['make', ':'.join((keyboard, keymap))]
-    return ['make', ':'.join((keyboard, keymap, target))]
+    make_args = [keyboard, keymap]
 
+    if target:
+        make_args.append(target)
 
-def parse_configurator_json(configurator_file):
-    """Open and parse a configurator json export
-    """
-    user_keymap = json.load(configurator_file)
-    return user_keymap
+    return ['make', ':'.join(make_args)]
 
 
 def compile_configurator_json(user_keymap, bootloader=None):
     """Convert a configurator export JSON file into a C file
 
     Args:
+
         configurator_filename
             The configurator JSON export file
 
@@ -43,6 +47,7 @@ def compile_configurator_json(user_keymap, bootloader=None):
             A bootloader to flash
 
     Returns:
+
         A command to run to compile and flash the C file.
     """
     # Write the keymap C file
@@ -52,3 +57,76 @@ def compile_configurator_json(user_keymap, bootloader=None):
     if bootloader is None:
         return create_make_command(user_keymap['keyboard'], user_keymap['keymap'])
     return create_make_command(user_keymap['keyboard'], user_keymap['keymap'], bootloader)
+
+
+def find_keyboard_keymap():
+    """Returns `(keyboard_name, keymap_name)` based on the user's current environment.
+
+    This determines the keyboard and keymap name using the following precedence order:
+
+        * Command line flags (--keyboard and --keymap)
+        * Current working directory
+            * `keyboards/<keyboard_name>`
+            * `keyboards/<keyboard_name>/keymaps/<keymap_name>`
+            * `layouts/**/<keymap_name>`
+            * `users/<keymap_name>`
+        * Configuration
+            * cli.config.<subcommand>.keyboard
+            * cli.config.<subcommand>.keymap
+    """
+    # Check to make sure their copy of MILC supports config_source
+    if not hasattr(cli, 'config_source'):
+        cli.log.error("Your QMK CLI is out of date. Please upgrade using pip3 or your package manager.")
+        exit(1)
+
+    # State variables
+    relative_cwd = under_qmk_firmware()
+    keyboard_name = ""
+    keymap_name = ""
+
+    # If the keyboard or keymap are passed as arguments use that in preference to anything else
+    if cli.config_source[cli._entrypoint.__name__]['keyboard'] == 'argument':
+        keyboard_name = cli.config[cli._entrypoint.__name__]['keyboard']
+    if cli.config_source[cli._entrypoint.__name__]['keymap'] == 'argument':
+        keymap_name = cli.config[cli._entrypoint.__name__]['keymap']
+
+    if not keyboard_name or not keymap_name:
+        # If we don't have a keyboard_name and keymap_name from arguments try to derive one or both
+        if relative_cwd and relative_cwd.parts and relative_cwd.parts[0] == 'keyboards':
+            # Try to determine the keyboard and/or keymap name
+            current_path = Path('/'.join(relative_cwd.parts[1:]))
+
+            if current_path.parts[-2] == 'keymaps':
+                if not keymap_name:
+                    keymap_name = current_path.parts[-1]
+                if not keyboard_name:
+                    keyboard_name = '/'.join(current_path.parts[:-2])
+            elif not keyboard_name and is_keyboard(current_path):
+                keyboard_name = str(current_path)
+
+        elif relative_cwd and relative_cwd.parts and relative_cwd.parts[0] == 'layouts':
+            # Try to determine the keymap name from the community layout
+            if is_keymap_dir(relative_cwd) and not keymap_name:
+                keymap_name = relative_cwd.name
+
+        elif relative_cwd and relative_cwd.parts and relative_cwd.parts[0] == 'users':
+            # Try to determine the keymap name based on which userspace they're in
+            if not keymap_name and len(relative_cwd.parts) > 1:
+                keymap_name = relative_cwd.parts[1]
+
+    # If we still don't have a keyboard and keymap check the config
+    if not keyboard_name and cli.config[cli._entrypoint.__name__]['keyboard']:
+        keyboard_name = cli.config[cli._entrypoint.__name__]['keyboard']
+
+    if not keymap_name and cli.config[cli._entrypoint.__name__]['keymap']:
+        keymap_name = cli.config[cli._entrypoint.__name__]['keymap']
+
+    return (keyboard_name, keymap_name)
+
+
+def parse_configurator_json(configurator_file):
+    """Open and parse a configurator json export
+    """
+    user_keymap = json.load(configurator_file)
+
+    return user_keymap

lib/python/qmk/constants.py

@@ -0,0 +1,9 @@
+"""Information that should be available to the python library.
+"""
+from pathlib import Path
+
+# The root of the qmk_firmware tree.
+QMK_FIRMWARE = Path.cwd()
+
+# This is the number of directories under `qmk_firmware/keyboards` that will be traversed. This is currently a limitation of our make system.
+MAX_KEYBOARD_SUBFOLDERS = 5

lib/python/qmk/keymap.py

@@ -31,11 +31,10 @@ def template(keyboard):
         keyboard
             The keyboard to return a template for.
     """
-    template_name = 'keyboards/%s/templates/keymap.c' % keyboard
+    template_file = Path('keyboards/%s/templates/keymap.c' % keyboard)
 
-    if os.path.exists(template_name):
-        with open(template_name, 'r') as fd:
-            return fd.read()
+    if template_file.exists():
+        return template_file.read_text()
 
     return DEFAULT_KEYMAP_C
 
@@ -85,15 +84,10 @@ def write(keyboard, keymap, layout, layers):
             An array of arrays describing the keymap. Each item in the inner array should be a string that is a valid QMK keycode.
     """
     keymap_c = generate(keyboard, layout, layers)
-    keymap_path = qmk.path.keymap(keyboard)
-    keymap_dir = os.path.join(keymap_path, keymap)
-    keymap_file = os.path.join(keymap_dir, 'keymap.c')
+    keymap_file = qmk.path.keymap(keyboard) / keymap / 'keymap.c'
 
-    if not os.path.exists(keymap_dir):
-        os.makedirs(keymap_dir)
-
-    with open(keymap_file, 'w') as keymap_fd:
-        keymap_fd.write(keymap_c)
+    keymap_file.parent.mkdir(parents=True, exist_ok=True)
+    keymap_file.write_text(keymap_c)
 
     return keymap_file
 

lib/python/qmk/path.py

@@ -2,34 +2,69 @@
 """
 import logging
 import os
+from pathlib import Path
 
+from qmk.constants import QMK_FIRMWARE, MAX_KEYBOARD_SUBFOLDERS
 from qmk.errors import NoSuchKeyboardError
 
 
+def is_keymap_dir(keymap_path):
+    """Returns True if `keymap_path` is a valid keymap directory.
+    """
+    keymap_path = Path(keymap_path)
+    keymap_c = keymap_path / 'keymap.c'
+    keymap_json = keymap_path / 'keymap.json'
+
+    return any((keymap_c.exists(), keymap_json.exists()))
+
+
+def is_keyboard(keyboard_name):
+    """Returns True if `keyboard_name` is a keyboard we can compile.
+    """
+    keyboard_path = QMK_FIRMWARE / 'keyboards' / keyboard_name
+    rules_mk = keyboard_path / 'rules.mk'
+    return rules_mk.exists()
+
+
+def under_qmk_firmware():
+    """Returns a Path object representing the relative path under qmk_firmware, or None.
+    """
+    cwd = Path(os.environ['ORIG_CWD'])
+
+    try:
+        return cwd.relative_to(QMK_FIRMWARE)
+    except ValueError:
+        return None
+
+
 def keymap(keyboard):
     """Locate the correct directory for storing a keymap.
 
     Args:
+
         keyboard
             The name of the keyboard. Example: clueboard/66/rev3
     """
-    for directory in ['.', '..', '../..', '../../..', '../../../..', '../../../../..']:
-        basepath = os.path.normpath(os.path.join('keyboards', keyboard, directory, 'keymaps'))
+    keyboard_folder = Path('keyboards') / keyboard
 
-        if os.path.exists(basepath):
-            return basepath
+    for i in range(MAX_KEYBOARD_SUBFOLDERS):
+        if (keyboard_folder / 'keymaps').exists():
+            return (keyboard_folder / 'keymaps').resolve()
 
-    logging.error('Could not find keymaps directory!')
+        keyboard_folder = keyboard_folder.parent
+
+    logging.error('Could not find the keymaps directory!')
     raise NoSuchKeyboardError('Could not find keymaps directory for: %s' % keyboard)
 
 
 def normpath(path):
-    """Returns the fully resolved absolute path to a file.
+    """Returns a `pathlib.Path()` object for a given path.
 
-    This function will return the absolute path to a file as seen from the
-    directory the script was called from.
+    This will use the path to a file as seen from the directory the script was called from. You should use this to normalize filenames supplied from the command line.
     """
-    if path and path[0] == '/':
-        return os.path.normpath(path)
+    path = Path(path)
 
-    return os.path.normpath(os.path.join(os.environ['ORIG_CWD'], path))
+    if path.is_absolute():
+        return Path(path)
+
+    return Path(os.environ['ORIG_CWD']) / path

lib/python/qmk/tests/test_qmk_path.py

@@ -1,13 +1,14 @@
 import os
+from pathlib import Path
 
 import qmk.path
 
 
 def test_keymap_onekey_pytest():
     path = qmk.path.keymap('handwired/onekey/pytest')
-    assert path == 'keyboards/handwired/onekey/keymaps'
+    assert path.samefile('keyboards/handwired/onekey/keymaps')
 
 
 def test_normpath():
     path = qmk.path.normpath('lib/python')
-    assert path == os.path.join(os.environ['ORIG_CWD'], 'lib/python')
+    assert path.samefile(Path(os.environ['ORIG_CWD']) / 'lib/python')

quantum/dynamic_keymap.c

@@ -30,6 +30,14 @@
 #    define DYNAMIC_KEYMAP_MACRO_COUNT 16
 #endif
 
+// This is the default EEPROM max address to use for dynamic keymaps.
+// The default is the ATmega32u4 EEPROM max address.
+// Explicitly override it if the keyboard uses a microcontroller with 
+// more EEPROM *and* it makes sense to increase it.
+#ifndef DYNAMIC_KEYMAP_EEPROM_MAX_ADDR
+#    define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 1023
+#endif
+
 // If DYNAMIC_KEYMAP_EEPROM_ADDR not explicitly defined in config.h,
 // default it start after VIA_EEPROM_CUSTOM_ADDR+VIA_EEPROM_CUSTOM_SIZE
 #ifndef DYNAMIC_KEYMAP_EEPROM_ADDR
@@ -45,11 +53,19 @@
 #    define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR (DYNAMIC_KEYMAP_EEPROM_ADDR + (DYNAMIC_KEYMAP_LAYER_COUNT * MATRIX_ROWS * MATRIX_COLS * 2))
 #endif
 
-// Dynamic macro uses up all remaining memory
-// Assumes 1K EEPROM on ATMega32U4
-// Override for anything different
+// Sanity check that dynamic keymaps fit in available EEPROM
+// If there's not 100 bytes available for macros, then something is wrong.
+// The keyboard should override DYNAMIC_KEYMAP_LAYER_COUNT to reduce it,
+// or DYNAMIC_KEYMAP_EEPROM_MAX_ADDR to increase it, *only if* the microcontroller has
+// more than the default.
+#if DYNAMIC_KEYMAP_EEPROM_MAX_ADDR - DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR < 100
+#    error Dynamic keymaps are configured to use more EEPROM than is available.
+#endif
+
+// Dynamic macros are stored after the keymaps and use what is available
+// up to and including DYNAMIC_KEYMAP_EEPROM_MAX_ADDR.
 #ifndef DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE
-#    define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE (1024 - DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR)
+#    define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE (DYNAMIC_KEYMAP_EEPROM_MAX_ADDR - DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR + 1)
 #endif
 
 uint8_t dynamic_keymap_get_layer_count(void) { return DYNAMIC_KEYMAP_LAYER_COUNT; }

util/win_shared_install.sh

@@ -37,7 +37,7 @@ function install_utils {
 function install_drivers {
     pushd "$download_dir"
     cp -f "$dir/drivers.txt" .
-    echo 
+    echo
     cmd.exe //c "qmk_driver_installer.exe $1 $2 drivers.txt"
     popd > /dev/null
 }
@@ -62,19 +62,19 @@ fi
 while true; do
     echo
     echo "Which USB drivers do you want to install?"
-    echo "(A)all - All supported drivers will be installed"
+    echo "(A)ll - All supported drivers will be installed"
     echo "(C)onnected - Only drivers for connected keyboards (in bootloader/flashing mode)"
     echo "              will be installed"
-    echo "(F)force - Like all, but will also override existing drivers for connected"
+    echo "(F)orce - Like all, but will also override existing drivers for connected"
     echo "           keyboards"
     echo "(N)one - No drivers will be installed,"
     echo "         flashing your keyboard will most likely not work"
-    read -p "(A/C/F/N)? " res
+    read -p "(a/c/f/N)? " res
     case $res in
-        [Aa]* ) install_drivers --all; break;;
+        [AaYy]* ) install_drivers --all; break;;
         [Cc]* ) install_drivers; break;;
         [Ff]* ) install_drivers --all --force; break;;
-        [Nn]* ) break;;
+        [Nn]* | "" ) break;;
         * ) echo "Invalid answer";;
     esac
 done