A comment indicating the insertion location of the new mode was added.

Add a temporary comment. The content is a contrast table of old magic number and new symbol.

docs/_sidebar.md

@@ -3,6 +3,7 @@
   * [Building Your First Firmware](newbs_building_firmware.md)
   * [Flashing Firmware](newbs_flashing.md)
   * [Testing and Debugging](newbs_testing_debugging.md)
+  * [Learning Resources](newbs_learn_more_resources.md)
 
 * [QMK Basics](README.md)
   * [QMK Introduction](getting_started_introduction.md)
@@ -47,6 +48,7 @@
   * [Backlight](feature_backlight.md)
   * [Bluetooth](feature_bluetooth.md)
   * [Bootmagic](feature_bootmagic.md)
+  * [Combos](feature_combo)
   * [Command](feature_command.md)
   * [Dynamic Macros](feature_dynamic_macros.md)
   * [Grave Escape](feature_grave_esc.md)
@@ -74,6 +76,7 @@
 * For Makers and Modders
   * [Hand Wiring Guide](hand_wire.md)
   * [ISP Flashing Guide](isp_flashing_guide.md)
+  * [ARM Debugging Guide](arm_debugging.md)
 
 * For a Deeper Understanding
   * [How Keyboards Work](how_keyboards_work.md)

docs/_summary.md

@@ -47,6 +47,7 @@
   * [Backlight](feature_backlight.md)
   * [Bluetooth](feature_bluetooth.md)
   * [Bootmagic](feature_bootmagic.md)
+  * [Combos](feature_combo)
   * [Command](feature_command.md)
   * [Dynamic Macros](feature_dynamic_macros.md)
   * [Grave Escape](feature_grave_esc.md)
@@ -74,6 +75,7 @@
 * For Makers and Modders
   * [Hand Wiring Guide](hand_wire.md)
   * [ISP Flashing Guide](isp_flashing_guide.md)
+  * [ARM Debugging Guide](arm_debugging.md)
 
 * For a Deeper Understanding
   * [How Keyboards Work](how_keyboards_work.md)

docs/arm_debugging.md

@@ -0,0 +1,87 @@
+# ARM Debugging usign Eclipse
+
+This page describes how to setup debugging for ARM MCUs using an SWD adapter and open-source/free tools. In this guide we will install GNU MCU Eclipse IDE for C/C++ Developers and OpenOCD together with all the necessary dependencies.
+
+This guide is catered towards advance users and assumes you can compile an ARM compatible keyboard on your machine using the MAKE flow.
+
+## Installing the software
+
+The main objective here is to get the MCU Eclipse IDE correcly installed on our machine. The necesarry instructions are derived from [this](https://gnu-mcu-eclipse.github.io/install/) install guide.
+
+### The xPack Manager
+
+This tool is a software package manager and it is used to help us get the necesarry depencencies.
+
+XPM runs using Node.js so grab that form [here](https://nodejs.org/en/). After installation, open a terminal and type `npm -v`. A reply with the version number means that the instalation was successful.
+
+XPM instalation instructions can be found [here](https://www.npmjs.com/package/xpm) and are OS specific. Entering `xpm --version` to your terminal should return the software version.
+
+### The ARM Toolchain
+
+Using XPM it is very easy to install the ARM toolchain. Enter the command `xpm install --global @gnu-mcu-eclipse/arm-none-eabi-gcc`.
+
+### Windows build tools
+
+If you are using windows you need to install this!
+
+`xpm install --global @gnu-mcu-eclipse/windows-build-tools`
+
+### Programer/Debugger Drivers
+
+Now its the time to install your programer's drivers. This tutorial was made using an ST-Link v2 which you can get from almost anywhere.
+If you have an ST-Link the drivers can be found [here](https://www.st.com/en/development-tools/stsw-link009.html) otherwise consult the manufuturer of your tool.
+
+### OpenOCD
+
+This dependency allows SWD access from GDB and it is essential for debugging. Run `xpm install --global @gnu-mcu-eclipse/openocd`.
+
+### Java
+
+Java is needed by Eclipse so please download it from [here](https://www.oracle.com/technetwork/java/javase/downloads/index.html).
+
+### GNU MCU Eclipse IDE
+
+Now its finally time to install the IDE. Use the Release page [here](https://github.com/gnu-mcu-eclipse/org.eclipse.epp.packages/releases/) to get the latest version.
+
+## Configuring Eclipse
+
+Open up the Eclipse IDE we just downloaded. To import our QMK directory select File -> Import -> C/C++ -> Existing code as Makefile Project. Select next and use Browse to select your QMK folder. In the tool-chain list select ARM Cross GCC and select Finish.
+
+Now you can see the QMK folder on the left hand side. Right click it and select Properties. On the left hand side, expand MCU and select ARM Toolchain Paths. Press xPack and OK. Repeat for OpenOCD Path  and if you are on windows for Build Tool Path. Select Apply and Close.
+
+Now its time to install the necessary MCU packages. Go to Packs perspective by selecting Window -> Open Perspective -> Others -> Packs. Now select the yellow refresh symbol next to the Packs tab. This will take a long time as it is requesting the MCU definitions from various places. If some of the links fail you can probably select Ignore.
+
+When this finishes you must find the MCU which we will be building/debugging for. In this example I will be using the STM32F3 series MCUs. On the left, select STMicroelectonics -> STM32F3 Series. On the middle window we can see the pack. Right click and select Install. Once that is done we can go back to the default perspective, Window -> Open Perspective -> Others -> C/C++.
+
+We need to let eclipse know the device we intent to build QMK on. Right click on the QMK folder -> Properties -> C/C++ Build -> Settings. Select the Devices tab and under devices select the appropriate variant of your MCU. For my example it is STM32F303CC
+
+While we are here let's setup the build command as well. Select C/C++ Build and then the Behavior tab. On the build command, replace `all` with your necessary make command. For example for a rev6 Planck with the default keymap this would be `planck/rev6:default`. Select Apply and Close.
+
+## Building
+
+If you have setup everything correctly pressing the hammer button should build the firmware for you and a .bin file should appear.
+
+## Debugging
+
+### Connecting the Debugger
+
+ARM MCUs use the Single Wire Debug (SWD) protocol which comprises of the clock (SWCLK) signal and the data (SWDIO) signal. Connecting this two wires and ground should be enough to allow full manipulation of the MCU. Here we assume that the keyboard will be powered though USB. The RESET signal is not necessary as we can manually assert it using the reset button. For a more advance setup, the SWO signal can be used which pipes printf and scanf asynchronously to the host but for our setup we will ignore it.
+
+NOTE: Make sure the SWCLK and SWDIO pins are not used in the matrix of your keyboard. If they are you can temporarily switch them for some other pins.
+
+### Configuring the Debugger
+
+Right click on your QMK folder, select Debug As -> Debug Configuration. Here double click on GDB OpenOCD Debugging. Select the debugger tab and enter the configuration necessary for your MCU. This might take some fiddling and googleing to find out. The default script for the STM32F3 is called stm32f3discovery.cfg. To let OpenOCD know, in the Config options enter `-f board/stm32f3discovery.cfg`.
+
+NOTE: In my case this configuration script requires editing to disable the reset assertion. The locations of the scripts can be found in the actual executable field usually under the path `openocd/version/.content/scripts/board`. Here I edited `reset_config srst_only` to `reset_config none`.
+
+Select Apply and Close.
+
+### Running the Debugger.
+
+Reset your keyboard.
+
+Press the bug icon and if all goes well you should soon find yourself in the debug perspective. Here the program counter will pause at the beginning of the main function and way for you to press Play. Most of the features of all debuggers work on ARM MCUs but for exact details google is your friend!
+
+
+Happy debugging!

docs/config_options.md

@@ -155,6 +155,10 @@ If you define these options you will enable the associated feature, which may in
     going to produce the 500 keystrokes a second needed to actually get more than a
     few ms of delay from this. But if you're doing chording on something with 3-4ms
     scan times? You probably want this.
+* `#define COMBO_COUNT 2`
+  * Set this to the number of combos that you're using in the [Combo](feature_combo.md) feature.
+* `#define COMBO_TERM 200`
+  * how long for the Combo keys to be detected. Defaults to `TAPPING_TERM` if not defined.
 
 ## RGB Light Configuration
 
@@ -234,6 +238,8 @@ Use these to enable or disable building certain features. The more you have enab
   * Console for debug(+400)
 * `COMMAND_ENABLE`
   * Commands for debug and configuration
+* `COMBO_ENABLE`
+  * Key combo feature
 * `NKRO_ENABLE`
   * USB N-Key Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 * `AUDIO_ENABLE`
@@ -245,7 +251,9 @@ Use these to enable or disable building certain features. The more you have enab
 * `UNICODE_ENABLE`
   * Unicode
 * `BLUETOOTH_ENABLE`
-  * Enable Bluetooth with the Adafruit EZ-Key HID
+  * Legacy option to Enable Bluetooth with the Adafruit EZ-Key HID. See BLUETOOTH
+* `BLUETOOTH`
+  * Current options are AdafruitEzKey, AdafruitBLE, RN42
 * `SPLIT_KEYBOARD`
   * Enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common
 * `WAIT_FOR_USB`

docs/contributing.md

@@ -57,14 +57,14 @@ Never made an open source contribution before? Wondering how contributions work
 Most of our style is pretty easy to pick up on, but right now it's not entirely consistent. You should match the style of the code surrounding your change, but if that code is inconsistent or unclear use the following guidelines:
 
 * We indent using two spaces (soft tabs)
-* We use One True Brace Style
+* We use a modified One True Brace Style
   * Opening Brace: At the end of the same line as the statement that opens the block
   * Closing Brace: Lined up with the first character of the statement that opens the block
   * Else If: Place the closing brace at the beginning of the line and the next opening brace at the end of the same line.
   * Optional Braces: Always include optional braces.
     * Good: if (condition) { return false; }
     * Bad: if (condition) return false;
-* We use C style comments: `/* */`
+* We encourage use of C style comments: `/* */`
   * Think of them as a story describing the feature
   * Use them liberally to explain why particular decisions were made.
   * Do not write obvious comments
@@ -72,6 +72,25 @@ Most of our style is pretty easy to pick up on, but right now it's not entirely
 * In general we don't wrap lines, they can be as long as needed. If you do choose to wrap lines please do not wrap any wider than 76 columns.
 * We use `#pragma once` at the start of header files rather than old-style include guards (`#ifndef THIS_FILE_H`, `#define THIS_FILE_H`, ..., `#endif`)
 
+Here is an example for easy reference:
+
+```c
+/* Enums for foo */
+enum foo_state {
+  FOO_BAR,
+  FOO_BAZ,
+};
+
+/* Returns a value */
+int foo(void) {
+  if (some_condition) {
+    return FOO_BAR;
+  } else {
+    return -1;
+  }
+}
+```
+
 # General Guidelines
 
 We have a few different types of changes in QMK, each requiring a different level of rigor. We'd like you to keep the following guidelines in mind no matter what type of change you're making.

docs/feature_advanced_keycodes.md

@@ -26,7 +26,8 @@ These functions allow you to activate layers in various ways. Note that layers a
 * `DF(layer)` - switches the default layer. The default layer is the always-active base layer that other layers stack on top of. See below for more about the default layer. This might be used to switch from QWERTY to Dvorak layout. (Note that this is a temporary switch that only persists until the keyboard loses power. To modify the default layer in a persistent way requires deeper customization, such as calling the `set_single_persistent_default_layer` function inside of [process_record_user](custom_quantum_functions.md#programming-the-behavior-of-any-keycode).)
 * `MO(layer)` - momentarily activates *layer*. As soon as you let go of the key, the layer is deactivated. 
 * `LM(layer, mod)` - Momentarily activates *layer* (like `MO`), but with modifier(s) *mod* active. Only supports layers 0-15 and the left modifiers.
-* `LT(layer, kc)` - momentarily activates *layer* when held, and sends *kc* when tapped.
+* `LT(layer, kc)` - momentarily activates *layer* when held, and sends *kc* when tapped. Only supports layers 0-15.
+* `OSL(layer)` - momentarily activates *layer* until the next key is pressed. See [One Shot Keys](#one-shot-keys) for details and additional functionality.
 * `TG(layer)` - toggles *layer*, activating it if it's inactive and vice versa
 * `TO(layer)` - activates *layer* and de-activates all other layers (except your default layer). This function is special, because instead of just adding/removing one layer to your active layer stack, it will completely replace your current active layers, uniquely allowing you to replace higher layers with a lower one. This is activated on keydown (as soon as the key is pressed).
 * `TT(layer)` - Layer Tap-Toggle. If you hold the key down, *layer* is activated, and then is de-activated when you let go (like `MO`). If you repeatedly tap it, the layer will be toggled on or off (like `TG`). It needs 5 taps by default, but you can change this by defining `TAPPING_TOGGLE` -- for example, `#define TAPPING_TOGGLE 2` to toggle on just two taps.

docs/feature_bluetooth.md

@@ -1,10 +1,40 @@
 # Bluetooth
 
-## Bluetooth Functionality
+## Bluetooth Known Supported Hardware
 
+Currently Bluetooth support is limited to AVR based chips. For Bluetooth 2.1 Qmk has support for RN-42 HID Firmware and Bluefruit EZ Key the later of which is not produced anymore. For more recent BLE protocols currently only the Adafruit Bluefruit SPI friend is directly supported. BLE is needed to connect to iOS devices. Note iOS does not support Mouse Input.
+
+|Board                                                           |Bluetooth Protocol          |Connection Type |Rules.mk                   |Bluetooth Chip|
+|----------------------------------------------------------------|----------------------------|----------------|---------------------------|--------------|
+|[Adafruit EzKey HID]("https://www.adafruit.com/product/1535")   |Bluetooth Classic           | UART           | BLUETOOTH = AdafruitEZKey |              |
+|Rover Networks RN-42 (Sparkfun Bluesmirf)                       |Bluetooth Classic           | UART           | BLUETOOTH = RN42          | RN-42        |
+|[Bluefruit LE SPI Friend](https://www.adafruit.com/product/2633)|Bluetooth Low Energy        | SPI            | BLUETOOTH = AdafruitBLE   | nRF5182      |
+
+Not Supported Yet but possible:
+* [Bluefruit LE UART Friend](https://www.adafruit.com/product/2479). [Possible tmk implementation found in](https://github.com/tmk/tmk_keyboard/issues/514)
+* HC-05 boards flashed with RN-42 firmware. They apparently both use the CSR BC417 Chip. Flashing it with RN-42 firmware gives it HID capability.
+* [Sparkfun Bluetooth mate](https://www.sparkfun.com/products/14839)
+* HM-13 based boards
+
+### Adafruit BLE SPI Friend
+Currently The only bluetooth chipset supported by QMK is the Adafruit Bluefruit SPI Friend. It's a Nordic nRF5182 based chip running Adafruit's custom firmware. Data is transmitted via Adafruit's SDEP over Hardware SPI. The [Feather 32u4 Bluefruit LE](https://www.adafruit.com/product/2829) is supported as it's an AVR mcu connected via SPI to the Nordic BLE chip with Adafruit firmware. If Building a custom board with the SPI friend it would be easiest to just use the pin selection that the 32u4 feather uses but you can change the pins in the config.h options with the following defines:
+* #define AdafruitBleResetPin D4
+* #define AdafruitBleCSPin    B4
+* #define AdafruitBleIRQPin   E6
+
+A Bluefruit UART friend can be converted to an SPI friend, however this [requires](https://github.com/qmk/qmk_firmware/issues/2274) some reflashing and soldering directly to the MDBT40 chip.
+
+## Adafruit EZ-Key hid
 This requires [some hardware changes](https://www.reddit.com/r/MechanicalKeyboards/comments/3psx0q/the_planck_keyboard_with_bluetooth_guide_and/?ref=search_posts), but can be enabled via the Makefile. The firmware will still output characters via USB, so be aware of this when charging via a computer. It would make sense to have a switch on the Bluefruit to turn it off at will.
 
+
 <!-- FIXME: Document bluetooth support more completely. -->
+## Bluetooth Rules.mk Options
+Use only one of these
+* BLUETOOTH_ENABLE = yes (Legacy Option)
+* BLUETOOTH = RN42
+* BLUETOOTH = AdafruitEZKey
+* BLUETOOTH = AdafruitBLE
 
 ## Bluetooth Keycodes
 

docs/feature_combo.md

@@ -0,0 +1,88 @@
+# Combos
+
+The Combo feature is a chording type solution for adding custom actions.  It lets you hit multiple keys at once and produce a different effect.  For instance, hitting `A` and `S` within the tapping term would hit `ESC` instead, or have it perform even more complex tasks.
+
+To enable this feature, yu need to add `COMBO_ENABLE = yes` to your `rules.mk`.
+
+Additionally, in your `config.h`, you'll need to specify the number of combos that you'll be using, by adding `#define COMBO_COUNT 1` (replacing 1 with the number that you're using).
+<!-- At this time, this is necessary -->
+
+Also, by default, the tapping term for the Combos is set to the same value as `TAPPING_TERM` (200 by default on most boards). But you can specify a different value by defining it in your `config.h`.  For instance: `#define COMBO_TERM 300` would set the time out period for combos to 300ms.
+
+Then, your `keymap.c` file, you'll need to define a sequence of keys, terminated with `COMBO_END`, and a structure to list the combination of keys, and it's resulting action.
+
+```c
+const uint16_t PROGMEM test_combo[] = {KC_A, KC_B, COMBO_END};
+combo_t key_combos[COMBO_COUNT] = {COMBO(test_combo, KC_ESC)};
+```
+
+This will send "Escape" if you hit the A and B keys.
+
+!> This method only supports [basic keycodes](keycodes_basic.md). See the examples for more control.
+
+## Examples
+
+If you want to add a list, then you'd use something like this:
+
+```c
+enum combos {
+  AB_ESC,
+  JK_TAB
+}
+const uint16_t PROGMEM ab_combo[] = {KC_A, KC_B, COMBO_END};
+const uint16_t PROGMEM jk_combo[] = {KC_J, KC_K, COMBO_END};
+
+combo_t key_combos[COMBO_COUNT] = {
+  [AB_ESC] = COMBO(ab_combo, KC_ESC),
+  [JK_TAB] = COMBO(jk_combo, KC_TAB)
+};
+```
+
+For a more complicated implementation, you can use the `process_combo_event` function to add custom handling.
+
+```c
+enum combo_events {
+  ZC_COPY,
+  ZV_PASTE
+  };
+
+const uint16_t PROGMEM copy_combo[] = {KC_Z, KC_C, COMBO_END};
+const uint16_t PROGMEM paste_combo[] = {KC_Z, KC_V, COMBO_END};
+
+combo_t key_combos[COMBO_COUNT] = {
+  [ZC_COPY] = COMBO_ACTION(copy_combo),
+  [ZV_PASTE] = COMBO_ACTION(paste_combo),
+};
+
+void process_combo_event(uint8_t combo_index, bool pressed) {
+  switch(combo_index) {
+    case ZC_COPY:
+      if (pressed) {
+        register_code(KC_LCTL);
+        register_code(KC_C);
+        unregister_code(KC_C);
+        unregister_code(KC_LCTL);
+      }
+      break;
+
+    case ZV_PASTE:
+      if (pressed) {
+        register_code(KC_LCTL);
+        register_code(KC_V);
+        unregister_code(KC_V);
+        unregister_code(KC_LCTL);
+      }
+      break;
+  }
+}
+```
+
+This will send Ctrl+C if you hit Z and C, and Ctrl+V if you hit Z and V.  But you could change this to do stuff like change layers, play sounds, or change settings.
+
+## Additional Configuration
+
+If you're using long combos, or even longer combos, you may run into issues with this, as the structure may not be large enough to accommodate what you're doing.
+
+In this case, you can add either `#define EXTRA_LONG_COMBOS` or `#define EXTRA_EXTRA_LONG_COMBOS` in your `config.h` file.
+
+You may also be able to enable action keys by defining `COMBO_ALLOW_ACTION_KEYS`.

docs/feature_rgblight.md

@@ -96,9 +96,10 @@ if `RGBLIGHT_EFFECT_xxxx` or `RGBLIGHT_ANIMATIONS` is defined, you also have a n
 |`RGBLIGHT_MODE_RGB_TEST`     | *None*            |RGB Test                               |
 |`RGBLIGHT_MODE_ALTERNATING`  | *None*            |Alternating                            |
 
-
 Check out [this video](https://youtube.com/watch?v=VKrpPAHlisY) for a demonstration.
 
+Note: For versions older than 0.6.117, The mode numbers were written directly. In `quantum/rgblight.h` there is a contrast table between the old mode number and the current symbol.
+
 The following options can be used to tweak the various animations:
 
 |Define                              |Default      |Description                                                                          |

docs/feature_unicode.md

@@ -4,45 +4,108 @@ There are three Unicode keymap definition method available in QMK:
 
 ## UNICODE_ENABLE
 
-Supports Unicode input up to 0xFFFF. The keycode function is `UC(n)` in
-keymap file, where *n* is a 4 digit hexadecimal.
+Supports Unicode input up to 0xFFFF. The keycode function is `UC(n)` in keymap file, where *n* is a 4 digit hexadecimal.
 
 ## UNICODEMAP_ENABLE
 
-Supports Unicode up to 0xFFFFFFFF. You need to maintain a separate mapping
-table `const uint32_t PROGMEM unicode_map[] = {...}` in your keymap file.
-The keycode function is `X(n)` where *n* is the array index of the mapping
-table.
+Supports Unicode up to 0xFFFFFFFF. You need to maintain a separate mapping table `const uint32_t PROGMEM unicode_map[] = {...}` in your keymap file. The keycode function is `X(n)` where *n* is the array index of the mapping table.
+
+And you may want to have an enum to make reference easier.  So you'd want to add something like this to your keymap:
+
+```c
+enum unicode_name {
+  BANG, // ‽
+  IRONY, // ⸮
+  SNEK // snke 🐍
+};
+
+const uint32_t PROGMEM unicode_map[] = {
+  [BANG]      = 0x0203D, // ‽
+  [IRONY]     = 0x02E2E, // ⸮
+  [SNEK]      = 0x1F40D // snke 🐍
+}:
+```
+
+Make sure that the order for both matches.
 
 ## UCIS_ENABLE
 
-TBD
+Supports Unicode up to 0xFFFFFFFF. As with `UNICODE_MAP`, you may want to main a mapping table in your keymap file.  However, there is no keycodes for this feature, you will have to add a keycode or function to call `qk_ucis_start()`. Once you've run that, you can just type the text for your unicode, and then hit space or enter to complete it, or ESC to cancel it. And if it matches an entry in your table, it will automatically "backspace" the trigger word (from your table) and then will input the unicode sequence.
 
-Unicode input in QMK works by inputing a sequence of characters to the OS,
+For instance, you would need to have a table like this in your keymap:
+
+```c
+const qk_ucis_symbol_t ucis_symbol_table[] = UCIS_TABLE
+(
+ UCIS_SYM("poop", 0x1f4a9),
+ UCIS_SYM("rofl", 0x1f923),
+ UCIS_SYM("kiss", 0x1f619)
+);
+```
+
+You run the function, and then type "rofl" and hit enter, it should backspace remove "rofl" and input the `0x1f923` unicode.
+
+### Customization
+
+There are several functions that you can add to your keymap to customize the functionality of this feature.
+
+* `void qk_ucis_start_user(void)` - This runs when you run the "start" function, and can be used to provide feedback. By default, it types out a keyboard emoji.
+* `void qk_ucis_success(uint8_t symbol_index)` - This runs when the unicode input has matched something, and has completed. Default doesn't do anything.
+* `void qk_ucis_symbol_fallback (void)` - This runs if the input text doesn't match anything.  The default function falls back to trying that input as a unicode code.
+
+The default code for these are:
+
+```c
+void qk_ucis_start_user(void) { // outputs keyboard emoji
+  unicode_input_start();
+  register_hex(0x2328);
+  unicode_input_finish();
+}
+
+void qk_ucis_success(uint8_t symbol_index) {
+}
+
+void qk_ucis_symbol_fallback (void) { // falls back to manual unicode entry
+  for (uint8_t i = 0; i < qk_ucis_state.count - 1; i++) {
+    uint8_t code = qk_ucis_state.codes[i];
+    register_code(code);
+    unregister_code(code);
+    wait_ms(UNICODE_TYPE_DELAY);
+  }
+}
+```
+
+## Unicode Input methods
+
+Unicode input in QMK works by inputting a sequence of characters to the OS,
 sort of like macro. Unfortunately, each OS has different ideas on how Unicode is input.
 
 This is the current list of Unicode input method in QMK:
 
-* UC_OSX: MacOS Unicode Hex Input support. Works only up to 0xFFFF. Disabled by default. To enable: go to System Preferences -> Keyboard -> Input Sources, and enable Unicode Hex.
-* UC_OSX_RALT: Same as UC_OSX, but sends the Right Alt key for unicode input
-* UC_LNX: Unicode input method under Linux. Works up to 0xFFFFF. Should work almost anywhere on ibus enabled distros. Without ibus, this works under GTK apps, but rarely anywhere else.
-* UC_WIN: (not recommended) Windows built-in Unicode input. To enable: create registry key under `HKEY_CURRENT_USER\Control Panel\Input Method\EnableHexNumpad` of type `REG_SZ` called `EnableHexNumpad`, set its value to 1, and reboot. This method is not recommended because of reliability and compatibility issue, use WinCompose method below instead.
-* UC_WINC: Windows Unicode input using WinCompose. Requires [WinCompose](https://github.com/samhocevar/wincompose). Works reliably under many (all?) variations of Windows.
+* __UC_OSX__: MacOS Unicode Hex Input support. Works only up to 0xFFFF. Disabled by default. To enable: go to System Preferences -> Keyboard -> Input Sources, and enable Unicode Hex.
+* __UC_OSX_RALT__: Same as UC_OSX, but sends the Right Alt key for unicode input
+* __UC_LNX__: Unicode input method under Linux. Works up to 0xFFFFF. Should work almost anywhere on ibus enabled distros. Without ibus, this works under GTK apps, but rarely anywhere else.
+* __UC_WIN__: (not recommended) Windows built-in Unicode input. To enable: create registry key under `HKEY_CURRENT_USER\Control Panel\Input Method\EnableHexNumpad` of type `REG_SZ` called `EnableHexNumpad`, set its value to 1, and reboot. This method is not recommended because of reliability and compatibility issue, use WinCompose method below instead.
+* __UC_WINC__: Windows Unicode input using WinCompose. Requires [WinCompose](https://github.com/samhocevar/wincompose). Works reliably under many (all?) variations of Windows.
 
-To type multiple characters for things like (ノಠ痊ಠ)ノ彡┻━┻, you can use `send_unicode_hex_string()` much like `SEND_STRING()` except you would use hex values seperated by spaces.
+At some point, you need to call `set_unicode_input_mode(x)` to set the correct unicode method.  This sets the method that is used to send the unicode, and stores it in EEPROM, so you only need to call this once.
+
+## `send_unicode_hex_string`
+
+To type multiple characters for things like (ノಠ痊ಠ)ノ彡┻━┻, you can use `send_unicode_hex_string()` much like `SEND_STRING()` except you would use hex values separate by spaces.
 For example, the table flip seen above would be `send_unicode_hex_string("0028 30CE 0CA0 75CA 0CA0 0029 30CE 5F61 253B 2501 253B")`
 
 There are many ways to get a hex code, but an easy one is [this site](https://r12a.github.io/app-conversion/). Just make sure to convert to hexadecimal, and that is your string.
 
-# Additional Language Support
+## Additional Language Support
 
 In `quantum/keymap_extras/`, you'll see various language files - these work the same way as the alternative layout ones do. Most are defined by their two letter country/language code followed by an underscore and a 4-letter abbreviation of its name. `FR_UGRV` which will result in a `ù` when using a software-implemented AZERTY layout. It's currently difficult to send such characters in just the firmware.
 
-# International Characters on Windows
+## International Characters on Windows
 
-[AutoHotkey](https://autohotkey.com) allows Windows users to create custom hotkeys among others.
+### AutoHotkey allows Windows users to create custom hotkeys among others.
 
-The method does not require Unicode support in the keyboard itself but depends instead of AutoHotkey running in the background.
+The method does not require Unicode support in the keyboard itself but depends instead of [AutoHotkey](https://autohotkey.com) running in the background.
 
 First you need to select a modifier combination that is not in use by any of your programs.
 CtrlAltWin is not used very widely and should therefore be perfect for this.
@@ -57,3 +120,11 @@ In the default script of AutoHotkey you can define custom hotkeys.
 
 The hotkeys above are for the combination CtrlAltGui and CtrlAltGuiShift plus the letter a.
 AutoHotkey inserts the Text right of `Send, ` when this combination is pressed.
+
+### US International
+
+If you enable the US International layout on the system, it will use punctuation to accent the characters. 
+
+For instance, typing "`a" will result in à.
+
+You can find details on how to enable this [here](https://support.microsoft.com/en-us/help/17424/windows-change-keyboard-layout).

docs/hardware_avr.md

@@ -8,7 +8,7 @@ If you have not yet you should read the [Keyboard Guidelines](hardware_keyboard_
 
 QMK has a number of features to simplify working with AVR keyboards. For most keyboards you don't have to write a single line of code. To get started run the `util/new_project.sh` script:
 
-```
+```bash
 $ util/new_project.sh my_awesome_keyboard
 ######################################################
 # /keyboards/my_awesome_keyboard project created. To start
@@ -30,7 +30,7 @@ This is where all the custom logic for your keyboard goes. Many keyboards do not
 
 This is the file you define your [Layout Macro(s)](feature_layouts.md) in. At minimum you should have a `#define LAYOUT` for your keyboard that looks something like this:
 
-```
+```c
 #define LAYOUT(          \
       k00, k01, k02,     \
       k10,   k11         \
@@ -57,7 +57,7 @@ At the top of the `config.h` you'll find USB related settings. These control how
 
 Do change the `MANUFACTURER`, `PRODUCT`, and `DESCRIPTION` lines to accurately reflect your keyboard.
 
-```
+```c
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x6060
 #define DEVICE_VER      0x0001
@@ -72,14 +72,14 @@ Do change the `MANUFACTURER`, `PRODUCT`, and `DESCRIPTION` lines to accurately r
 
 The next section of the `config.h` file deals with your keyboard's matrix. The first thing you should set is the matrix's size. This is usually, but not always, the same number of rows and columns as the physical key arrangement.
 
-```
+```c
 #define MATRIX_ROWS 2
 #define MATRIX_COLS 3
 ```
 
 Once you've defined the size of your matrix you need to define which pins on your MCU are connected to rows and columns. To do so simply specify the names of those pins:
 
-```
+```c
 #define MATRIX_ROW_PINS { D0, D5 }
 #define MATRIX_COL_PINS { F1, F0, B0 }
 #define UNUSED_PINS
@@ -89,7 +89,7 @@ The number of `MATRIX_ROW_PINS` entries must be the same as the number you assig
 
 Finally, you can specify the direction your diodes point. This can be `COL2ROW`, `ROW2COL`, or `CUSTOM_MATRIX`.
 
-```
+```c
 #define DIODE_DIRECTION COL2ROW
 ```
 
@@ -97,16 +97,14 @@ Finally, you can specify the direction your diodes point. This can be `COL2ROW`,
 
 By default QMK supports backlighting on pins `B5`, `B6`, and `B7`. If you are using one of those you can simply enable it here. For more details see the [Backlight Documentation](feature_backlight.md).
 
-```
+```c
 #define BACKLIGHT_PIN B7
 #define BACKLIGHT_LEVELS 3
 #define BACKLIGHT_BREATHING
 #define BREATHING_PERIOD 6
 ```
 
-{% hint style='info' %}
-You can use backlighting on any pin you like, but you will have to do more work to support that. See the [Backlight Documentation](feature_backlight.md) for more details.
-{% endhint %}
+?> You can use backlighting on any pin you like, but you will have to do more work to support that. See the [Backlight Documentation](feature_backlight.md) for more details.
 
 ### Other Configuration Options
 
@@ -120,7 +118,7 @@ You use the `rules.mk` file to tell QMK what files to build and what features to
 
 These options tell the build system what CPU to build for. Be very careful if you change any of these settings, you can render your keyboard inoperable.
 
-```
+```make
 MCU = atmega32u4
 F_CPU = 16000000
 ARCH = AVR8
@@ -128,26 +126,26 @@ F_USB = $(F_CPU)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 ```
 
-### Bootloader Size
+### Bootloaders
 
-The bootloader is a special section of your MCU that allows you to upgrade the code stored on the MCU. Think of it like a Rescue Partition for your keyboard. If you are using a teensy 2.0, or a device like the Ergodox EZ that uses the teensy bootloader you should set this to `512`. Most other bootloaders should be set to `4096`, but `1024` and `2048` are other possible values you may encounter.
+The bootloader is a special section of your MCU that allows you to upgrade the code stored on the MCU. Think of it like a Rescue Partition for your keyboard. 
 
-#### Teensy 2.0 Bootloader Example
+#### Teensy Bootloader Example
 
-```
-OPT_DEFS += -DBOOTLOADER_SIZE=512
-```
-
-#### Teensy 2.0++ Bootloader Example
-
-```
-OPT_DEFS += -DBOOTLOADER_SIZE=1024
+```make
+BOOTLOADER = halfkay
 ```
 
 #### Atmel DFU Loader Example
 
+```make
+BOOTLOADER = atmel-dfu
 ```
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+#### Pro Micro Bootloader Example
+
+```make
+BOOTLOADER = caterina
 ```
 
 ### Build Options

docs/newbs.md

@@ -6,7 +6,7 @@ Not sure if your keyboard can run QMK? If it's a mechanical keyboard you built y
 
 ## Overview
 
-There are 4 main sections to this guide:
+There are 5 main sections to this guide:
 
 * [Getting Started](newbs_getting_started.md)
 * [Building Your First Firmware](newbs_building_firmware.md)
@@ -15,4 +15,3 @@ There are 4 main sections to this guide:
 * [Learn More with these Resources](newbs_learn_more_resources.md)
 
 This guide is focused on helping someone who has never compiled software before. It makes choices and recommendations based on that viewpoint. There are alternative methods for many of these procedures, and we support most of those alternatives. If you have any doubt about how to accomplish a task you can [ask us for guidance](getting_started_getting_help.md).
-

docs/newbs_learn_more_resources.md

@@ -2,12 +2,12 @@
 These resources are aimed at giving new members in the qmk community more understanding to the information provided in the newbs docs.
 
 Git resources:
-*
-*[Great General Tutorial](https://www.codecademy.com/learn/learn-git)
-*[Git Game To Learn From Examples](https://learngitbranching.js.org/)
-*[Git Resources to Learn More About Github](getting_started_github.md)
-*[Git Resources Aimed Specificly toward QMK](contributing.md)
+
+* [Great General Tutorial](https://www.codecademy.com/learn/learn-git)
+* [Git Game To Learn From Examples](https://learngitbranching.js.org/)
+* [Git Resources to Learn More About Github](getting_started_github.md)
+* [Git Resources Aimed Specificly toward QMK](contributing.md)
 
 
 Command Line resources:
-*[Good General Tutorial on Command Line](https://www.codecademy.com/learn/learn-the-command-line)
+* [Good General Tutorial on Command Line](https://www.codecademy.com/learn/learn-the-command-line)

drivers/avr/i2c_master.c

@@ -8,7 +8,9 @@
 #include "i2c_master.h"
 #include "timer.h"
 
+#ifndef F_SCL
 #define F_SCL 400000UL // SCL frequency
+#endif
 #define Prescaler 1
 #define TWBR_val ((((F_CPU / F_SCL) / Prescaler) - 16 ) / 2)
 

keyboards/68keys/68keys.c

@@ -0,0 +1,6 @@
+#include "68keys.h"
+
+void matrix_init_kb(void)
+{
+	matrix_init_user();
+}

keyboards/68keys/68keys.h

@@ -0,0 +1,20 @@
+#include "quantum.h"
+
+#define LAYOUT_68_ansi(                                                             \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K10, K11, K12, K13, K14, K15, K16, \
+    K17, K18, K20, K21, K22, K23, K24, K25, K26, K27, K28, K30, K31, K32, K33, K34, \
+    K35, K36, K37, K38, K40, K41, K42, K43, K44, K45, K46, K47, K48,                \
+    K50, K51, K52, K53, K54, K55, K56, K57, K58, K60, K61, K62, K63,                \
+    K64, K65, K66, K67, K68, K70, K71, K72, K73, K74)                               \
+    {                                                                               \
+        {K00, K01, K02, K03, K04, K05, K06, K07, K08},                              \
+            {K10, K11, K12, K13, K14, K15, K16, K17, K18},                          \
+            {K20, K21, K22, K23, K24, K25, K26, K27, K28},                          \
+            {K30, K31, K32, K33, K34, K35, K36, K37, K38},                          \
+            {K40, K41, K42, K43, K44, K45, K46, K47, K48},                          \
+            {K50, K51, K52, K53, K54, K55, K56, K57, K58},                          \
+            {K60, K61, K62, K63, K64, K65, K66, K67, K68},                          \
+        {                                                                           \
+            K70, K71, K72, K73, K74                                                 \
+        }                                                                           \
+    }

keyboards/68keys/README.md

@@ -0,0 +1,23 @@
+# 68Keys.io
+
+Custom [68Keys.io](https://68keys.io) DIY keyboard.
+
+Keyboard Maintainer: [sbstjn](https://sbstjn.com)  
+Hardware Supported: Pro Micro  
+Hardware Availability: [DIY Guide](https://68keys.io)
+
+Make example for this keyboard (after setting up your build environment):
+
+```bash
+$ > cd qmk_firmware/
+$ > make 68keys:default
+```
+
+Example of flashing this keyboard:
+
+```bash
+$ > cd qmk_firmware/
+$ > make 68keys:default:avrdude
+```
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/68keys/config.h

@@ -0,0 +1,42 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0A0C
+#define DEVICE_VER 0x0068
+#define MANUFACTURER 68Keys.io
+#define PRODUCT The 68Keys.io Keyboard
+#define DESCRIPTION A 68 keys mechanical keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 9
+
+#define MATRIX_ROW_PINS                \
+    {                                  \
+        B6, B2, B3, B1, F7, F6, F5, F4 \
+    }
+#define MATRIX_COL_PINS                    \
+    {                                      \
+        D3, D2, D1, D0, D4, C6, D7, E6, B4 \
+    }
+#define UNUSED_PINS
+
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B5
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))

keyboards/68keys/info.json

@@ -0,0 +1,81 @@
+{
+  "keyboard_name": "68Keys.io",
+  "url": "https://68keys.io",
+  "maintainer": "qmk",
+  "width": 17.25,
+  "height": 5,
+  "layouts": {
+    "LAYOUT_68_ansi": {
+      "layout": [
+        { "label": "~", "x": 0, "y": 0 },
+        { "label": "!", "x": 1, "y": 0 },
+        { "label": "@", "x": 2, "y": 0 },
+        { "label": "#", "x": 3, "y": 0 },
+        { "label": "$", "x": 4, "y": 0 },
+        { "label": "%", "x": 5, "y": 0 },
+        { "label": "^", "x": 6, "y": 0 },
+        { "label": "&", "x": 7, "y": 0 },
+        { "label": "*", "x": 8, "y": 0 },
+        { "label": "(", "x": 9, "y": 0 },
+        { "label": ")", "x": 10, "y": 0 },
+        { "label": "_", "x": 11, "y": 0 },
+        { "label": "+", "x": 12, "y": 0 },
+        { "label": "Backspace", "x": 13, "y": 0, "w": 2 },
+        { "label": "ESC", "x": 15.25, "y": 0 },
+        { "label": "PGUP", "x": 16.25, "y": 0 },
+        { "label": "Tab", "x": 0, "y": 1, "w": 1.5 },
+        { "label": "Q", "x": 1.5, "y": 1 },
+        { "label": "W", "x": 2.5, "y": 1 },
+        { "label": "E", "x": 3.5, "y": 1 },
+        { "label": "R", "x": 4.5, "y": 1 },
+        { "label": "T", "x": 5.5, "y": 1 },
+        { "label": "Y", "x": 6.5, "y": 1 },
+        { "label": "U", "x": 7.5, "y": 1 },
+        { "label": "I", "x": 8.5, "y": 1 },
+        { "label": "O", "x": 9.5, "y": 1 },
+        { "label": "P", "x": 10.5, "y": 1 },
+        { "label": "{", "x": 11.5, "y": 1 },
+        { "label": "}", "x": 12.5, "y": 1 },
+        { "label": "|", "x": 13.5, "y": 1, "w": 1.5 },
+        { "label": "DEL", "x": 15.25, "y": 1 },
+        { "label": "PGDN", "x": 16.25, "y": 1 },
+        { "label": "Caps Lock", "x": 0, "y": 2, "w": 1.75 },
+        { "label": "A", "x": 1.75, "y": 2 },
+        { "label": "S", "x": 2.75, "y": 2 },
+        { "label": "D", "x": 3.75, "y": 2 },
+        { "label": "F", "x": 4.75, "y": 2 },
+        { "label": "G", "x": 5.75, "y": 2 },
+        { "label": "H", "x": 6.75, "y": 2 },
+        { "label": "J", "x": 7.75, "y": 2 },
+        { "label": "K", "x": 8.75, "y": 2 },
+        { "label": "L", "x": 9.75, "y": 2 },
+        { "label": ":", "x": 10.75, "y": 2 },
+        { "label": "\"", "x": 11.75, "y": 2 },
+        { "label": "Enter", "x": 12.75, "y": 2, "w": 2.25 },
+        { "label": "Shift", "x": 0, "y": 3, "w": 2.25 },
+        { "label": "Z", "x": 2.25, "y": 3 },
+        { "label": "X", "x": 3.25, "y": 3 },
+        { "label": "C", "x": 4.25, "y": 3 },
+        { "label": "V", "x": 5.25, "y": 3 },
+        { "label": "B", "x": 6.25, "y": 3 },
+        { "label": "N", "x": 7.25, "y": 3 },
+        { "label": "M", "x": 8.25, "y": 3 },
+        { "label": "<", "x": 9.25, "y": 3 },
+        { "label": ">", "x": 10.25, "y": 3 },
+        { "label": "?", "x": 11.25, "y": 3 },
+        { "label": "Shift", "x": 12.25, "y": 3, "w": 2.75 },
+        { "x": 15.25, "y": 3 },
+        { "label": "CTRL", "x": 0, "y": 4, "w": 1.25 },
+        { "label": "ALT", "x": 1.25, "y": 4, "w": 1.25 },
+        { "label": "GUI", "x": 2.5, "y": 4, "w": 1.25 },
+        { "x": 3.75, "y": 4, "w": 6.25 },
+        { "label": "GUI", "x": 10, "y": 4, "w": 1.25 },
+        { "label": "ALT", "x": 11.25, "y": 4, "w": 1.25 },
+        { "label": "CTRL", "x": 12.5, "y": 4, "w": 1.25 },
+        { "x": 14.25, "y": 4 },
+        { "x": 15.25, "y": 4 },
+        { "x": 16.25, "y": 4 }
+      ]
+    }
+  }
+}

keyboards/68keys/keymaps/default/keymap.c

@@ -0,0 +1,10 @@
+#include QMK_KEYBOARD_H
+#include "68keys.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_68_ansi(
+        KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_ESC, KC_PGUP,
+        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_PGDN,
+        KC_CAPSLOCK, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
+        KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT)};

keyboards/68keys/rules.mk

@@ -0,0 +1,22 @@
+LAYOUTS = 68_ansi
+
+MCU = atmega32u4
+F_CPU = 16000000
+ARCH = AVR8
+F_USB = $(F_CPU)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+BOOTLOADER = atmel-dfu
+
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration (+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys (+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control (+450)
+CONSOLE_ENABLE = no         # Console for debug (+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+

keyboards/dc01/left/config.h

@@ -46,6 +46,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F4, F1, F0, F7, F6, F5 }
 #define UNUSED_PINS
 
+#define F_SCL 300000UL
+
 /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
 #define DIODE_DIRECTION COL2ROW
 

keyboards/dc01/left/matrix.c

@@ -43,7 +43,7 @@ static uint8_t error_count_arrow = 0;
 /* Set 0 if debouncing isn't needed */
 
 #ifndef DEBOUNCING_DELAY
-#   define DEBOUNCING_DELAY 5
+#    define DEBOUNCING_DELAY 5
 #endif
 
 #if (DEBOUNCING_DELAY > 0)
@@ -135,10 +135,7 @@ uint8_t matrix_cols(void) {
     return MATRIX_COLS;
 }
 
-
 i2c_status_t i2c_transaction(uint8_t address, uint32_t mask, uint8_t col_offset);
-//uint8_t i2c_transaction_numpad(void);
-//uint8_t i2c_transaction_arrow(void);
 
 //this replases tmk code
 void matrix_setup(void){
@@ -220,7 +217,7 @@ uint8_t matrix_scan(void)
                 matrix[i] &= 0x3F; //mask bits to keep
             }
         }
-    }else{ //no error
+   }else{ //no error
         error_count_right = 0;
     }
     
@@ -440,40 +437,28 @@ static void unselect_cols(void)
 // Complete rows from other modules over i2c
 i2c_status_t i2c_transaction(uint8_t address, uint32_t mask, uint8_t col_offset) {
     i2c_status_t err = i2c_start((address << 1) | I2C_WRITE, 10);
-    if (err) return err;
-    i2c_write(0x01, 10);
-    if (err) return err;
+    i2c_write(0x01, 10); //request data in address 1
 
-    i2c_start((address << 1) | I2C_READ, 10);
-    if (err) return err;
+    i2c_start((address << 1) | I2C_READ, 5);
 
     err = i2c_read_ack(10);
     if (err == 0x55) { //synchronization byte
 
-    for (uint8_t i = 0; i < MATRIX_ROWS-1 ; i++) { //assemble slave matrix in main matrix
-        matrix[i] &= mask; //mask bits to keep
-        err = i2c_read_ack(10);
-        if (err >= 0) {
-            matrix[i] |= ((uint32_t)err << (MATRIX_COLS_SCANNED + col_offset)); //add new bits at the end
-        } else {
-             return err;
-        }
-      }
-    //last read request must be followed by a NACK
-    matrix[MATRIX_ROWS - 1] &= mask; //mask bits to keep
-    err = i2c_read_nack(10);
-    if (err >= 0) {
+        for (uint8_t i = 0; i < MATRIX_ROWS-1 ; i++) { //assemble slave matrix in main matrix
+            matrix[i] &= mask; //mask bits to keep
+            err = i2c_read_ack(10);
+                matrix[i] |= ((uint32_t)err << (MATRIX_COLS_SCANNED + col_offset)); //add new bits at the end
+            }
+        //last read request must be followed by a NACK
+        matrix[MATRIX_ROWS - 1] &= mask; //mask bits to keep
+        err = i2c_read_nack(10);
         matrix[MATRIX_ROWS - 1] |= ((uint32_t)err << (MATRIX_COLS_SCANNED + col_offset)); //add new bits at the end
-        } else {
-            return err;
-        }
+
     } else {
         i2c_stop(10);
         return 1;
     }
 
     i2c_stop(10);
-    if (err) return err;
-
     return 0;
 }

keyboards/dz60/dz60.h

@@ -70,7 +70,7 @@
  * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d      │
  * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
  * │30      │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3d    │3e │
- * ├─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴──────┬┴───┴┬───┬─┴───┤
+ * ├─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┤
  * │▓▓▓▓▓│41 │43   │46 (7u)                    │4b   │4d │▓▓▓▓▓│
  * └─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘
 */
@@ -224,4 +224,58 @@
     { k40,  k41,   KC_NO, k43,  KC_NO, KC_NO, k46,  KC_NO, KC_NO, KC_NO, k4a,  k4b,  k4c,   k4d,   k4e   }  \
 }
 
+/* LAYOUT_60_b_ansi (maximized DZ60 Plate B layout for ANSI)
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │0e │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+ * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e   │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+ * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d      │
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┬───┤
+ * │30      │32 │33 │34 │35 │36 │37 │38 │39 │3a │3c    │3d │3e │
+ * ├────┬───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴──┬┴──┬───┼───┼───┤
+ * │40  │41  │43  │44      │46  │48        │4a │4b │4c │4d │4e │
+ * └────┴────┴────┴────────┴────┴──────────┴───┴───┴───┴───┴───┘
+*/
+#define LAYOUT_60_b_ansi( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d,      \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a,      k3c, k3d, k3e, \
+    k40, k41,      k43, k44,      k46,      k48,      k4a, k4b, k4c, k4d, k4e  \
+) { \
+    { k00,  k01,   k02,   k03,  k04,  k05,   k06,  k07,   k08,  k09,   k0a,  k0b,   k0c,  k0d,  k0e   }, \
+    { k10,  KC_NO, k12,   k13,  k14,  k15,   k16,  k17,   k18,  k19,   k1a,  k1b,   k1c,  k1d,  k1e   }, \
+    { k20,  KC_NO, k22,   k23,  k24,  k25,   k26,  k27,   k28,  k29,   k2a,  k2b,   k2c,  k2d,  KC_NO }, \
+    { k30,  KC_NO, k32,   k33,  k34,  k35,   k36,  k37,   k38,  k39,   k3a,  KC_NO, k3c,  k3d,  k3e   }, \
+    { k40,  k41,   KC_NO, k43,  k44,  KC_NO, k46,  KC_NO, k48,  KC_NO, k4a,  k4b,   k4c,  k4d,  k4e   }  \
+}
+
+/* LAYOUT_60_b_iso (maximized DZ60 Plate B layout for ISO)
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │0e │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+ * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │     │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐2d  │
+ * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │1e │    │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬──┴────┤
+ * │30  │31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3c    │3d │3e │
+ * ├────┼───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴──┬┴──┬───┼───┼───┤
+ * │40  │41  │43  │44      │46  │48        │4a │4b │4c │4d │4e │
+ * └────┴────┴────┴────────┴────┴──────────┴───┴───┴───┴───┴───┘
+*/
+#define LAYOUT_60_b_iso( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d,      \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k1e, k2d, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a,      k3c, k3d, k3e, \
+    k40, k41,      k43, k44,      k46,      k48,      k4a, k4b, k4c, k4d, k4e  \
+) { \
+    { k00,  k01,   k02,   k03,  k04,  k05,   k06,  k07,   k08,  k09,   k0a,  k0b,   k0c,  k0d,  k0e   }, \
+    { k10,  KC_NO, k12,   k13,  k14,  k15,   k16,  k17,   k18,  k19,   k1a,  k1b,   k1c,  k1d,  k1e   }, \
+    { k20,  KC_NO, k22,   k23,  k24,  k25,   k26,  k27,   k28,  k29,   k2a,  k2b,   k2c,  k2d,  KC_NO }, \
+    { k30,  k31,   k32,   k33,  k34,  k35,   k36,  k37,   k38,  k39,   k3a,  KC_NO, k3c,  k3d,  k3e   }, \
+    { k40,  k41,   KC_NO, k43,  k44,  KC_NO, k46,  KC_NO, k48,  KC_NO, k4a,  k4b,   k4c,  k4d,  k4e   }  \
+}
+
 #endif

keyboards/dz60/info.json

@@ -36,6 +36,14 @@
     "LAYOUT_60_iso_5x1u": {
       "key_count": 63,
       "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"|", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"~", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"/", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Fn", "x":10, "y":4}, {"label":"←", "x":11, "y":4}, {"label":"↓", "x":12, "y":4}, {"label":"↑", "x":13, "y":4}, {"label":"→", "x":14, "y":4}]
+    },
+    "LAYOUT_60_b_ansi": {
+      "key_count": 66,
+      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"1", "x":1, "y":0}, {"label":"2", "x":2, "y":0}, {"label":"3", "x":3, "y":0}, {"label":"4", "x":4, "y":0}, {"label":"5", "x":5, "y":0}, {"label":"6", "x":6, "y":0}, {"label":"7", "x":7, "y":0}, {"label":"8", "x":8, "y":0}, {"label":"9", "x":9, "y":0}, {"label":"0", "x":10, "y":0}, {"label":"-", "x":11, "y":0}, {"label":"=", "x":12, "y":0}, {"x":13, "y":0}, {"label":"Back Space", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"[", "x":11.5, "y":1}, {"label":"]", "x":12.5, "y":1}, {"label":"\\", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":";", "x":10.75, "y":2}, {"label":"'", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":",", "x":9.25, "y":3}, {"label":".", "x":10.25, "y":3}, {"label":"Shift", "x":11.25, "y":3, "w":1.75}, {"label":"Up", "x":13, "y":3}, {"label":"Del", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"GUI", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"label":"Space", "x":3.75, "y":4, "w":2.25}, {"label":"Space", "x":6, "y":4, "w":1.25}, {"label":"Space", "x":7.25, "y":4, "w":2.75}, {"label":"Alt", "x":10, "y":4}, {"label":"Fn", "x":11, "y":4}, {"label":"Left", "x":12, "y":4}, {"label":"Down", "x":13, "y":4}, {"label":"Right", "x":14, "y":4}]
+    },
+    "LAYOUT_60_b_iso": {
+      "key_count": 67,
+      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"1", "x":1, "y":0}, {"label":"2", "x":2, "y":0}, {"label":"3", "x":3, "y":0}, {"label":"4", "x":4, "y":0}, {"label":"5", "x":5, "y":0}, {"label":"6", "x":6, "y":0}, {"label":"7", "x":7, "y":0}, {"label":"8", "x":8, "y":0}, {"label":"9", "x":9, "y":0}, {"label":"0", "x":10, "y":0}, {"label":"-", "x":11, "y":0}, {"label":"=", "x":12, "y":0}, {"x":13, "y":0}, {"label":"Back Space", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"[", "x":11.5, "y":1}, {"label":"]", "x":12.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":";", "x":10.75, "y":2}, {"label":"'", "x":11.75, "y":2}, {"label":"#", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"\\", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":",", "x":9.25, "y":3}, {"label":".", "x":10.25, "y":3}, {"label":"Shift", "x":11.25, "y":3, "w":1.75}, {"label":"Up", "x":13, "y":3}, {"label":"Del", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"GUI", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"label":"Space", "x":3.75, "y":4, "w":2.25}, {"label":"Space", "x":6, "y":4, "w":1.25}, {"label":"Space", "x":7.25, "y":4, "w":2.75}, {"label":"AltGr", "x":10, "y":4}, {"label":"Fn", "x":11, "y":4}, {"label":"Left", "x":12, "y":4}, {"label":"Down", "x":13, "y":4}, {"label":"Right", "x":14, "y":4}]
     }
   }
 }

keyboards/dz60/keymaps/boris_burger/README.md

@@ -0,0 +1,52 @@
+### boris_burger's DZ60 layout
+
+This layout is for a DZ60 with a 2U left shift, 1U right shift and an arrow cluster in
+the bottom right.
+
+It is based off stephengrier's layout adding support for Home/End/PgUp/PgDn using Fn+arrows
+as used on macOS and Microsoft Surface. It has Insert instead of Fn near the arrow cluster
+and other smaller tweaks:
+- CapsLock is the only Fn key (CapsLock by itself is not available)
+- Del is available as Fn+Backspace
+- Ctrl+Del is available as Ctrl+Backspace (e.g. deleting word to the right of the cursor)
+- Shift+Del is available as Shift+Backspace (e.g. permanently deleting file or e-mail)
+- PgUp = Fn+Up
+- PgDn = Fn+Down
+- Home = Fn+Left
+- End = Fn+Right
+- Tilde = Shift+Esc 
+- Backtick = Fn+Esc
+- Underglow toggle and mode selection are available as Fn+Q and Fn+W
+- Reset (bootloader mode) = Fn+B
+
+### 0 Qwerty
+```
+,-----------------------------------------------------------------------------------------.
+| Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   Bkspc   |
+|-----------------------------------------------------------------------------------------+
+| Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |    \   |
+|-----------------------------------------------------------------------------------------+
+|   Fn    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+|-----------------------------------------------------------------------------------------+
+| Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  | RSh |  U  | Ins |
+|-----------------------------------------------------------------------------------------+
+| Ctrl |  Win  |  Alt  |              Space                | Alt | Menu |  L  |  D  |  R  |
+`-----------------------------------------------------------------------------------------'
+```
+
+### 1 Fn Layer
+```
+FN Layer
+,-----------------------------------------------------------------------------------------.
+|  `  |  F1 |  F2 |  F3 |  F4 |  F5 |  F6 |  F7 |  F8 |  F9 | F10 | F11 | F12 |    DEL    |
+|-----------------------------------------------------------------------------------------+
+|        |RBB T|RGB M| Hue+| Hue-| Sat+| Sat-| Val+| Val-|     |     |      |     |       |
+|-----------------------------------------------------------------------------------------+
+|         | BL T| BL M| BL+ | BL- |     |     |     |     |     |     |     |             |
+|-----------------------------------------------------------------------------------------+
+|           |     |     |     |     |RESET|     |     |     |     |     |     | PgUp|     |
+|-----------------------------------------------------------------------------------------+
+|      |       |       |                                   |     |      | Home| PgDn| End |
+`-----------------------------------------------------------------------------------------'
+```
+

keyboards/dz60/keymaps/boris_burger/config.h

@@ -0,0 +1 @@
+#define GRAVE_ESC_GUI_OVERRIDE    # Always send Escape if GUI is pressed

keyboards/dz60/keymaps/boris_burger/keymap.c

@@ -0,0 +1,87 @@
+#include QMK_KEYBOARD_H
+
+/* Holds state of modifiers when Backspace was pressed.
+ * Used to ensure that the correct keycode is unregistered when Backspace is released.
+ */
+static uint8_t bspc_mods = 0;
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /* Qwerty
+    * ,-----------------------------------------------------------------------------------------.
+    * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   Bkspc   |
+    * |-----------------------------------------------------------------------------------------+
+    * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |    \   |
+    * |-----------------------------------------------------------------------------------------+
+    * |   Fn    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+    * |-----------------------------------------------------------------------------------------+
+    * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  | RSh |  U  | Ins |
+    * |-----------------------------------------------------------------------------------------+
+    * | Ctrl |  Win  |  Alt  |              Space                | Alt | Menu |  L  |  D  |  R  |
+    * `-----------------------------------------------------------------------------------------'
+    */
+    LAYOUT_directional(
+        KC_GESC, KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , _______, KC_BSPC,
+        KC_TAB ,          KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_LBRC, KC_RBRC, KC_BSLS,
+        MO(1)  ,          KC_A   , KC_S   , KC_D   , KC_F   , KC_G   , KC_H   , KC_J   , KC_K   , KC_L   , KC_SCLN, KC_QUOT, KC_ENT ,
+        KC_LSFT,          KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, KC_UP  , KC_INS ,
+        KC_LCTL, KC_LGUI,          KC_LALT, KC_SPC ,          KC_SPC ,          KC_SPC ,          KC_RALT, KC_RGUI, KC_LEFT, KC_DOWN, KC_RIGHT
+    ),
+
+    /* FN Layer
+    * ,-----------------------------------------------------------------------------------------.
+    * |  `  |  F1 |  F2 |  F3 |  F4 |  F5 |  F6 |  F7 |  F8 |  F9 | F10 | F11 | F12 |    DEL    |
+    * |-----------------------------------------------------------------------------------------+
+    * |        |RBB T|RGB M| Hue+| Hue-| Sat+| Sat-| Val+| Val-|     |     |      |     |       |
+    * |-----------------------------------------------------------------------------------------+
+    * |         | BL T| BL M| BL+ | BL- |     |     |     |     |     |     |     |             |
+    * |-----------------------------------------------------------------------------------------+
+    * |           |     |     |     |     |RESET|     |     |     |     |     |     | PgUp|     |
+    * |-----------------------------------------------------------------------------------------+
+    * |      |       |       |                                   |     |      | Home| PgDn| End |
+    * `-----------------------------------------------------------------------------------------'
+    */
+    LAYOUT_directional(
+        KC_GRV , KC_F1  , KC_F2  , KC_F3  , KC_F4  , KC_F5  , KC_F6  , KC_F7  , KC_F8  , KC_F9  , KC_F10 , KC_F11 , KC_F12 , _______, KC_DEL ,
+        _______,          RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______,
+        _______,          BL_TOGG, BL_STEP, BL_INC , BL_DEC , _______, _______, _______, _______, _______, _______, _______, _______,
+        _______,          _______, _______, _______, _______, RESET  , _______, _______, _______, _______, _______, _______, KC_PGUP, _______,
+        _______, _______,          _______, _______,          _______,          _______,          _______, _______, KC_HOME, KC_PGDN, KC_END
+        ),
+};
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch(keycode) {
+        case KC_BSPC: {
+            if (record->event.pressed) {
+                const uint8_t current_mods = get_mods();
+                const uint8_t shift = current_mods & (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT));
+                const uint8_t ctrl = current_mods & (MOD_BIT(KC_LCTL)|MOD_BIT(KC_RCTL));
+                bspc_mods = current_mods;
+                if(shift || ctrl) {
+                    add_key(KC_DEL);
+                    add_mods(current_mods);
+                    send_keyboard_report();
+                } else {
+                    return true;
+                }
+            }
+            else {
+                if(bspc_mods & (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LCTL)|MOD_BIT(KC_RCTL))) {
+                    // if Shift or Ctrl was pressed with Backspace, than that was intepreted as Del, so we need
+                    // to unregister the Del key 
+                    del_key(KC_DEL);
+                } else {
+                    // Either Backspace was pressed without mods, or with a modifier other than Shift or Ctrl
+                    // so it is simply taken as Backspace
+                    del_key(KC_BSPC);
+                }
+                send_keyboard_report();
+            }
+            return false;
+        }
+        default:
+            return true;
+    }
+}

keyboards/dz60/keymaps/crd/keymap.c

@@ -0,0 +1,48 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  /* Qwerty
+   * ,-----------------------------------------------------------------------------------------.
+   * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   Bkspc   |
+   * |-----------------------------------------------------------------------------------------+
+   * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |    \   |
+   * |-----------------------------------------------------------------------------------------+
+   * | Ctrl/Esc|  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+   * |-----------------------------------------------------------------------------------------+
+   * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  | RSh |  U  | DEL |
+   * |-----------------------------------------------------------------------------------------+
+   * | Ctrl |  Alt  |  Cmd  |              Space                | Cmd  | FN  |  L  |  D  |  R  |
+   * `-----------------------------------------------------------------------------------------'
+   */
+
+  LAYOUT_directional(
+      KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, _______, KC_BSPC,
+      KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+      CTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+      KC_LSFT,         KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL,
+      KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_SPC, KC_SPC, KC_RGUI, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT
+      ),
+
+  /* FN Layer
+   * ,-----------------------------------------------------------------------------------------.
+   * | ` ~ |  F1 |  F2 |  F3 |  F4 |  F5 |  F6 |  F7 |  F8 |  F9 | F10 | F11 | F12 |   RESET   |
+   * |-----------------------------------------------------------------------------------------+
+   * |        |RBB T|RGB M| Hue+| Hue-| Sat+| Sat-| Val+| Val-|     |     |      |      |      |
+   * |-----------------------------------------------------------------------------------------+
+   * |         | BL T| BL M| BL+ | BL- |     |     |     |     |     |     |     |             |
+   * |-----------------------------------------------------------------------------------------+
+   * |           |     |     |     |     |     |     |     |     |     |     |     |PgUp |     |
+   * |-----------------------------------------------------------------------------------------+
+   * |      |       |       |                                   |     |      |Home |PgDn | End |
+   * `-----------------------------------------------------------------------------------------'
+   */
+
+  LAYOUT_directional(
+      KC_GRV, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10, KC_F11, KC_F12, KC_TRNS, RESET,
+      _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______,
+      _______, BL_TOGG, BL_STEP, BL_INC, BL_DEC, _______, _______, _______, _______, _______, _______, _______,
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, _______,
+      _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDOWN, KC_END
+      ),
+};

keyboards/dz60/keymaps/thomasviaud/README.md

@@ -0,0 +1,4 @@
+## French ISO Layout
+
+Here is a very simple version of a French ISO Layout (handled by OS).
+Feel free to take this as base for your own layout.

keyboards/dz60/keymaps/thomasviaud/keymap.c

@@ -0,0 +1,18 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	LAYOUT_60_iso(
+		KC_ESC,		KC_1, 		KC_2, 		KC_3, 		KC_4, 		KC_5, 		KC_6, 		KC_7, 		KC_8, 		KC_9, 		KC_0, 		KC_MINS, 	KC_EQL, 	     			KC_BSPC,
+		KC_TAB,					 		KC_Q,			KC_W, 		KC_E, 		KC_R, 		KC_T, 		KC_Y, 		KC_U, 		KC_I, 		KC_O, 		KC_P, 		KC_LBRC, 	KC_RBRC,	
+		KC_CAPS, 						KC_A, 		KC_S, 		KC_D,			KC_F,			KC_G,			KC_H,			KC_J,			KC_K, 		KC_L,			KC_SCLN,	KC_QUOT,  KC_NUHS	,	KC_ENT,
+		KC_LSFT, 	KC_NUBS,	KC_Z, 		KC_X,			KC_C, 		KC_V, 		KC_B, 		KC_N, 		KC_M, 		KC_COMM, 	KC_DOT, 	KC_SLSH, 						KC_RSFT,
+		KC_LCTL, 	KC_LGUI,						KC_LALT, 											KC_SPC, 																KC_RALT, 	KC_RGUI, 					 	MO(1), 		KC_RCTL),
+
+	LAYOUT_60_iso(
+		KC_GRV,		KC_F1, 		KC_F2, 		KC_F3, 		KC_F4, 		KC_F5, 		KC_F6, 		KC_F7, 		KC_F8, 		KC_F9, 		KC_F10, 	KC_F11, 	KC_F12,	      			KC_DEL,
+		_______,					 	_______, 	KC_UP, 		_______, 	_______, 	_______, 	_______, 	_______, 	_______, 	_______, 	_______,  _______, _______,	
+		_______, 						KC_LEFT, 	KC_DOWN, 	KC_RIGHT,	_______,	_______,	_______,	_______,	_______, 	_______,	_______,	_______, _______,		_______,
+		_______, 	_______,	RGB_TOG, 	RGB_MOD, 	RGB_HUI, 	RGB_HUD, 	RGB_SAI, 	RGB_SAD, 	RGB_VAI, 	RGB_VAD, 	_______, 	_______, 					 _______,
+		_______, 	_______,						_______, 											RESET, 																  _______, 	_______, 					 _______, 	_______),
+};

keyboards/e6v2/le/info.json

@@ -8,9 +8,12 @@
         "LAYOUT": {
             "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"x":0, "y":3}, {"x":1, "y":3}, {"label":"Z", "x":2, "y":3}, {"label":"X", "x":3, "y":3}, {"label":"C", "x":4, "y":3}, {"label":"V", "x":5, "y":3}, {"label":"B", "x":6, "y":3}, {"label":"N", "x":7, "y":3}, {"label":"M", "x":8, "y":3}, {"label":"<", "x":9, "y":3}, {"label":">", "x":10, "y":3}, {"label":"?", "x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.75}, {"label":"Ctrl", "x":1.75, "y":4, "w":1.25}, {"label":"Win", "x":3, "y":4, "w":1.25}, {"label":"Alt", "x":4.25, "y":4, "w":1.25}, {"x":5.5, "y":4, "w":2.75}, {"x":8.25, "y":4, "w":1.75}, {"x":10, "y":4}, {"label":"Alt", "x":11, "y":4}, {"label":"Win", "x":12, "y":4}, {"label":"Menu", "x":13, "y":4}, {"label":"Ctrl", "x":14, "y":4}]
         },
-
         "LAYOUT_60_ansi": {
             "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+        },
+        "LAYOUT_60_hhkb": {
+            "key_count": 60,
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"1", "x":1, "y":0}, {"label":"2", "x":2, "y":0}, {"label":"3", "x":3, "y":0}, {"label":"4", "x":4, "y":0}, {"label":"5", "x":5, "y":0}, {"label":"6", "x":6, "y":0}, {"label":"7", "x":7, "y":0}, {"label":"8", "x":8, "y":0}, {"label":"9", "x":9, "y":0}, {"label":"0", "x":10, "y":0}, {"label":"-", "x":11, "y":0}, {"label":"=", "x":12, "y":0}, {"label":"\\", "x":13, "y":0}, {"label":"`", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"[", "x":11.5, "y":1}, {"label":"]", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":";", "x":10.75, "y":2}, {"label":"'", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":",", "x":9.25, "y":3}, {"label":".", "x":10.25, "y":3}, {"label":"/", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}]
         }
     }
-}
+}

keyboards/e6v2/le/keymaps/johu/keymap.c

@@ -0,0 +1,98 @@
+#include QMK_KEYBOARD_H
+
+#define _BL 0
+#define _FL 1
+#define _SL 2
+#define _CL 3
+
+// Tap dance defines
+#define CTL_ESC     CTL_T(KC_ESC)               // Tap for Esc, hold for Ctrl
+#define HPR_TAB     ALL_T(KC_TAB)               // Tap for Tab, hold for Hyper (Super+Ctrl+Shift+Alt)
+#define SFT_ENT     SFT_T(KC_ENT)               // Tap for Enter, hold for Shift
+#define KC_SPFN     LT(_SL, KC_SPC)             // Tap for space, hold for function layer (aka SpaceFN)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Layer 0: Base layer (Default layer)
+ * ,-----------------------------------------------------------------------------------------.
+ * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |  \  |  `  |
+ * |-----------------------------------------------------------------------------------------+
+ * |Tab/Hyper|  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |  Bksp |
+ * |-----------------------------------------------------------------------------------------+
+ * | Ctrl/Esc  |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter  |
+ * |-----------------------------------------------------------------------------------------+
+ * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  | Shift/Ent | FN  |
+ * |-----------------------------------------------------------------------------------------+
+ *           |LGUI | LAlt  |               Space                   | RAlt   |RGUI |
+ *           `--------------------------------------------------------------------'
+ */
+  [_BL] = LAYOUT_60_hhkb(
+      KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,
+      HPR_TAB, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
+      CTL_ESC, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+      KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          SFT_ENT, MO(_FL),
+               KC_LGUI, KC_LALT,                       KC_SPFN,                        KC_RALT, KC_RGUI
+      ),
+
+/* Layer 1: FN Layer
+ * ,-----------------------------------------------------------------------------------------.
+ * |  CL | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 | Ins | Del |
+ * |-----------------------------------------------------------------------------------------+
+ * |        |     |     |     |     |     |     |     | Psc | Slck| Paus| Up  |     | Del    |
+ * |-----------------------------------------------------------------------------------------+
+ * |         | Vol-| Vol+| Mute|     |     | *   | /   | Home| PgUp| Left|Right|             |
+ * |-----------------------------------------------------------------------------------------+
+ * |           | Prev| Play| Next|     |     | +   | -   | End  |PgDn| Down|           |     |
+ * |-----------------------------------------------------------------------------------------+
+ *           |       |       |                                    | Stop  |  CL   |
+ *           `--------------------------------------------------------------------'
+ */
+  [_FL] = LAYOUT_60_hhkb(
+      TG(_CL),  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS,  KC_DEL,
+       _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,   _______, KC_DEL,
+       _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______,
+       _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, KC_PPLS, KC_PMNS, KC_END,  KC_PGDN, KC_DOWN,          _______, _______,
+                _______, _______,                       _______,                        KC_MSTP, MO(_CL)
+      ),
+
+/* Layer 2: Space FN Layer
+* ,-----------------------------------------------------------------------------------------.
+* |  CL | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 | Ins | Del |
+* |-----------------------------------------------------------------------------------------+
+* |        |     |     |     |     |     |     | PgUp|     | PgDn|     |     |     | Del    |
+* |-----------------------------------------------------------------------------------------+
+* |         | Vol-| Vol+| Mute|     |     | Left| Down| Up  |Right|     |     |             |
+* |-----------------------------------------------------------------------------------------+
+* |           | Prev| Play| Next|     |     | Home| End |     |     |     |           |     |
+* |-----------------------------------------------------------------------------------------+
+*            |       |       |                                    |       |  CL   |
+*            `--------------------------------------------------------------------'
+*/
+  [_SL] = LAYOUT_60_hhkb(
+      TG(_CL), KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS,  KC_DEL,
+      _______, _______, _______, _______, _______, _______, _______, KC_PGUP, _______, KC_PGDN, _______, _______, _______, KC_DEL,
+      _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______, _______, _______,
+      _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, KC_HOME, KC_END,  _______, _______, _______,          _______, _______,
+               _______, _______,                        _______,                       _______, MO(_CL)
+      ),
+
+/* Layer 3: Control Layer
+ * ,-----------------------------------------------------------------------------------------.
+ * |     |     |     |     |     |     |     |     |     |     |     |     |     |     |     |
+ * |-----------------------------------------------------------------------------------------+
+ * |        | BL- | BL+ | BL  |     |     |     |     |     |     |     |     |     | RESET  |
+ * |-----------------------------------------------------------------------------------------+
+ * |         | RGBT| RGBM|     |     |     |     |     |     |     |     |     |             |
+ * |-----------------------------------------------------------------------------------------+
+ * |  CAPS     | Hue+| Hue-| Sat+| Sat-| Val+| Val-|     |      |    |     |           |     |
+ * |-----------------------------------------------------------------------------------------+
+ *           |       |       |                                     |       |      |
+ *           `--------------------------------------------------------------------'
+ */
+  [_CL] = LAYOUT_60_hhkb(
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______,
+      _______, BL_TOGG, BL_STEP, BL_DEC,  BL_INC,  _______, _______, _______, _______, _______,  _______, _______, _______, RESET,
+      _______, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______,
+      KC_CAPS, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______,  _______,          _______, _______,
+               _______, _______,                        _______,                       _______,  _______
+      )
+};

keyboards/e6v2/le/keymaps/johu/readme.md

@@ -0,0 +1,40 @@
+# johu's E6-V2 Last Edition (LE) HHKB
+Make example for this keyboard (after setting up your build environment):
+```bash
+$ make e6v2/le:johu
+```
+
+Or to make and flash:
+```bash
+$ make e6v2/le:johu:dfu
+```
+
+See the [build environment setup] and the [make instructions] for more
+information. Brand new to QMK? Start with our [Complete Newbs Guide].
+
+## Layer 0: Base Layer
+* HHKB Qwerty layout plus some specials:
+  * The Space key sends `Space` when tapped, toggles to *Space FN Layer* when held
+  * [Grave Escape]
+  * The Ctrl key sends `Esc` when tapped, `Ctrl` when held
+  * The Tab key sends `Tab` when tapped, [Hyper] (`Super+Ctrl+Alt+Shift`) when held
+  * The right Shift key sends `Enter` when tapped, `Shift` when held
+
+## Layer 1: Function Layer
+* Default HHKB function layer includig the iconic diamond arrow cluster
+* Multimedia controls
+
+## Layer 2: Space FN Layer
+* VIM style arrow cluster
+* Multimedia controls
+
+## Layer 3: Control Layer
+* Reset button
+* RGB controls
+* Caps Lock
+
+[build environment setup]: https://docs.qmk.fm/#/getting_started_build_tools
+[make instructions]: https://docs.qmk.fm/#/getting_started_make_guide
+[Complete Newbs Guide]: https://docs.qmk.fm/#/newbs
+[Grave Escape]: https://beta.docs.qmk.fm/features/feature_grave_esc
+[Hyper]: http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key

keyboards/e6v2/le/le.h

@@ -33,4 +33,32 @@
   { K40, KC_NO, K42, K43, KC_NO, KC_NO, KC_NO, K47, KC_NO, KC_NO, K4A, K4B, KC_NO, K4D, K4E   }, \
 }
 
+/* LAYOUT_60_hhkb
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0e │0d │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+ * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e   │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+ * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d      │
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
+ * │30      │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c    │3e │
+ * ├─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴──────┬┴───┴┬───┬─┴───┤
+ * │▓▓▓▓▓│42 │43   │47 (7u)                    │4b   │4d │▓▓▓▓▓│
+ * └─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘
+*/
+#define LAYOUT_60_hhkb( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, K0D, \
+    K10,      K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
+    K20,      K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      \
+    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C,      K3E, \
+              K42, K43,                K47,                K4B,      K4D       \
+)\
+{\
+  { K00,   K01,   K02, K03, K04,   K05,   K06,   K07, K08,   K09,   K0A,   K0B, K0C,   K0D,   K0E   }, \
+  { K10,   KC_NO, K12, K13, K14,   K15,   K16,   K17, K18,   K19,   K1A,   K1B, K1C,   K1D,   K1E   }, \
+  { K20,   KC_NO, K22, K23, K24,   K25,   K26,   K27, K28,   K29,   K2A,   K2B, K2C,   K2D,   KC_NO }, \
+  { K30,   KC_NO, K32, K33, K34,   K35,   K36,   K37, K38,   K39,   K3A,   K3B, K3C,   KC_NO, K3E   }, \
+  { KC_NO, KC_NO, K42, K43, KC_NO, KC_NO, KC_NO, K47, KC_NO, KC_NO, KC_NO, K4B, KC_NO, K4D,   KC_NO }, \
+}
+
 #endif

keyboards/e6v2/readme.md

@@ -17,4 +17,4 @@ The E6V2 has been available with either a bootmapper client or QMK powered PCB.
 
 Please use the appropriate version when making your firmware. Flashing one in place of the other, can brick your PCB. Please be certain whether you have a OE or LE  PCB. 
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/evil80/readme.md

@@ -0,0 +1,15 @@
+# Evil 80
+
+![Evil 80](https://i.imgur.com/f5dKuML.jpg)
+
+Also known as the Odyssey, the Evil 80 is a QMK-powered aluminum TKL keyboard featuring an Aviator connector cable. Sold via a Geekhack group buy in January of 2018.
+
+Keyboard Maintainer: [The QMK Community](https://github.com/qmk)  
+Hardware Supported: Evil 80-Odyssey QMK version  
+Hardware Availability: [Geekhack](https://geekhack.org/index.php?topic=93434.0)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make evil80:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/helix/config.h

@@ -48,17 +48,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
   #define DISABLE_LEADER
 #endif // USE_Link_Time_Optimization
 
-#if defined(LED_ANIMATIONS) || defined(RGBLIGHT_ANIMATIONS)
-   #undef RGBLIGHT_ANIMATIONS
-   #define RGBLIGHT_EFFECT_BREATHING
-   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
-   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-   #define RGBLIGHT_EFFECT_SNAKE
-   #define RGBLIGHT_EFFECT_KNIGHT
-   #define RGBLIGHT_EFFECT_CHRISTMAS
-   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
-   #define RGBLIGHT_EFFECT_RGB_TEST
-   #define RGBLIGHT_EFFECT_ALTERNATING
-#endif
-
 #endif /* CONFIG_H */

keyboards/helix/pico/keymaps/biacco/config.h

@@ -27,3 +27,17 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
   #define AUDIO_CLICKY
 #endif
 
+// If you need more program area, try select and reduce rgblight modes to use.
+
+// Selection of RGBLIGHT MODE to use.
+#if defined(LED_ANIMATIONS)
+   #define RGBLIGHT_EFFECT_BREATHING
+   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+   #define RGBLIGHT_EFFECT_SNAKE
+   #define RGBLIGHT_EFFECT_KNIGHT
+   #define RGBLIGHT_EFFECT_CHRISTMAS
+   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+   //#define RGBLIGHT_EFFECT_RGB_TEST
+   //#define RGBLIGHT_EFFECT_ALTERNATING
+#endif

keyboards/helix/pico/keymaps/biacco/rules.mk

@@ -92,7 +92,7 @@ ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
 endif
 
 ifeq ($(strip $(LED_ANIMATIONS)), yes)
-    OPT_DEFS += -DRGBLIGHT_ANIMATIONS
+    OPT_DEFS += -DLED_ANIMATIONS
 endif
 
 ifeq ($(strip $(OLED_ENABLE)), yes)

keyboards/helix/pico/keymaps/default/config.h

@@ -28,4 +28,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
   #define AUDIO_CLICKY
 #endif
 
+// If you need more program area, try select and reduce rgblight modes to use.
+
+// Selection of RGBLIGHT MODE to use.
+#if defined(LED_ANIMATIONS)
+   #define RGBLIGHT_EFFECT_BREATHING
+   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+   #define RGBLIGHT_EFFECT_SNAKE
+   #define RGBLIGHT_EFFECT_KNIGHT
+   #define RGBLIGHT_EFFECT_CHRISTMAS
+   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+   //#define RGBLIGHT_EFFECT_RGB_TEST
+   //#define RGBLIGHT_EFFECT_ALTERNATING
+#endif
+
 #endif /* CONFIG_USER_H */

keyboards/helix/pico/keymaps/default/keymap.c

@@ -238,7 +238,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         } else {
           TOG_STATUS = !TOG_STATUS;
           #ifdef RGBLIGHT_ENABLE
-            //rgblight_mode(16);
+            //rgblight_mode(RGBLIGHT_MODE_SNAKE + 1);
           #endif
         }
         layer_on(_LOWER);
@@ -261,7 +261,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         } else {
           TOG_STATUS = !TOG_STATUS;
           #ifdef RGBLIGHT_ENABLE
-            //rgblight_mode(15);
+            //rgblight_mode(RGBLIGHT_MODE_SNAKE);
           #endif
         }
         layer_on(_RAISE);

keyboards/helix/pico/keymaps/default/rules.mk

@@ -92,7 +92,7 @@ ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
 endif
 
 ifeq ($(strip $(LED_ANIMATIONS)), yes)
-    OPT_DEFS += -DRGBLIGHT_ANIMATIONS
+    OPT_DEFS += -DLED_ANIMATIONS
 endif
 
 ifeq ($(strip $(OLED_ENABLE)), yes)

keyboards/helix/rev1/keymaps/OLED_sample/keymap.c

@@ -368,7 +368,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
         } else {
           TOG_STATUS = !TOG_STATUS;
-          rgblight_mode(16);
+          rgblight_mode(RGBLIGHT_MODE_SNAKE + 1);
         }
         layer_on(_LOWER);
         update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
@@ -387,7 +387,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
         } else {
           TOG_STATUS = !TOG_STATUS;
-          rgblight_mode(15);
+          rgblight_mode(RGBLIGHT_MODE_SNAKE);
         }
         layer_on(_RAISE);
         update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);

keyboards/helix/rev2/keymaps/default/config.h

@@ -21,9 +21,21 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
 
-// if you need more program area, try uncomment follow line
-//#include "serial_config_simpleapi.h"
-
 // place overrides here
 
+// If you need more program area, try select and reduce rgblight modes to use.
+
+// Selection of RGBLIGHT MODE to use.
+#if defined(LED_ANIMATIONS)
+   #define RGBLIGHT_EFFECT_BREATHING
+   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+   #define RGBLIGHT_EFFECT_SNAKE
+   #define RGBLIGHT_EFFECT_KNIGHT
+   #define RGBLIGHT_EFFECT_CHRISTMAS
+   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+   //#define RGBLIGHT_EFFECT_RGB_TEST
+   //#define RGBLIGHT_EFFECT_ALTERNATING
+#endif
+
 #endif /* CONFIG_USER_H */

keyboards/helix/rev2/keymaps/default/keymap.c

@@ -373,7 +373,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         } else {
           TOG_STATUS = !TOG_STATUS;
           #ifdef RGBLIGHT_ENABLE
-            //rgblight_mode(16);
+            //rgblight_mode(RGBLIGHT_MODE_SNAKE + 1);
           #endif
         }
         layer_on(_LOWER);
@@ -396,7 +396,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         } else {
           TOG_STATUS = !TOG_STATUS;
           #ifdef RGBLIGHT_ENABLE
-            //rgblight_mode(15);
+            //rgblight_mode(RGBLIGHT_MODE_SNAKE);
           #endif
         }
         layer_on(_RAISE);

keyboards/helix/rev2/keymaps/default/rules.mk

@@ -100,7 +100,7 @@ ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
 endif
 
 ifeq ($(strip $(LED_ANIMATIONS)), yes)
-    OPT_DEFS += -DRGBLIGHT_ANIMATIONS
+    OPT_DEFS += -DLED_ANIMATIONS
 endif
 
 ifeq ($(strip $(OLED_ENABLE)), yes)

keyboards/helix/rev2/keymaps/edvorakjp/config.h

@@ -1,11 +1,23 @@
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
 
-// if you need more program area, try uncomment follow line
-//#include "serial_config_simpleapi.h"
-
 #undef TAPPING_FORCE_HOLD
 #undef TAPPING_TERM
 #define TAPPING_TERM 120
 
+// If you need more program area, try select and reduce rgblight modes to use.
+
+// Selection of RGBLIGHT MODE to use.
+#if defined(LED_ANIMATIONS)
+   #define RGBLIGHT_EFFECT_BREATHING
+   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+   #define RGBLIGHT_EFFECT_SNAKE
+   #define RGBLIGHT_EFFECT_KNIGHT
+   #define RGBLIGHT_EFFECT_CHRISTMAS
+   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+   //#define RGBLIGHT_EFFECT_RGB_TEST
+   //#define RGBLIGHT_EFFECT_ALTERNATING
+#endif
+
 #endif /* CONFIG_USER_H */

keyboards/helix/rev2/keymaps/edvorakjp/keymap.c

@@ -35,7 +35,7 @@ void matrix_scan_user(void) {
 
 #ifdef RGBLIGHT_ENABLE
 uint32_t layer_state_set_keymap(uint32_t state) {
-  rgblight_mode_noeeprom(1);
+  rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT);
   switch (biton32(state)) {
     case _EDVORAKJ1:
     case _EDVORAKJ2:
@@ -52,7 +52,7 @@ uint32_t layer_state_set_keymap(uint32_t state) {
       rgblight_sethsv_noeeprom_green();
       break;
     default: //  for any other layers, or the default layer
-      rgblight_mode_noeeprom(28);
+      rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_GRADIENT + 3);
       rgblight_sethsv_noeeprom_red();
       break;
   }

keyboards/helix/rev2/keymaps/edvorakjp/rules.mk

@@ -102,7 +102,7 @@ ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
 endif
 
 ifeq ($(strip $(LED_ANIMATIONS)), yes)
-  OPT_DEFS += -DRGBLIGHT_ANIMATIONS
+  OPT_DEFS += -DLED_ANIMATIONS
 endif
 
 ifeq ($(strip $(OLED_ENABLE)), yes)

keyboards/helix/rev2/keymaps/five_rows/config.h

@@ -21,12 +21,27 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
 
-// if you need more program area, try uncomment follow line
-//#include "serial_config_simpleapi.h"
-
 #undef TAPPING_TERM
-#define TAPPING_TERM 140
+#define TAPPING_TERM 300
+#define PERMISSIVE_HOLD
+/* when TAPPING_TERM >= 500 same effect PERMISSIVE_HOLD.
+   see tmk_core/common/action_tapping.c */
 
 // place overrides here
 
+// If you need more program area, try select and reduce rgblight modes to use.
+
+// Selection of RGBLIGHT MODE to use.
+#if defined(LED_ANIMATIONS)
+   #define RGBLIGHT_EFFECT_BREATHING
+   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+   //#define RGBLIGHT_EFFECT_SNAKE
+   //#define RGBLIGHT_EFFECT_KNIGHT
+   #define RGBLIGHT_EFFECT_CHRISTMAS
+   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+   //#define RGBLIGHT_EFFECT_RGB_TEST
+   //#define RGBLIGHT_EFFECT_ALTERNATING
+#endif
+
 #endif /* CONFIG_USER_H */

keyboards/helix/rev2/keymaps/five_rows/keymap.c

@@ -10,6 +10,9 @@
 #ifdef SSD1306OLED
   #include "ssd1306.h"
 #endif
+#ifdef CONSOLE_ENABLE
+  #include <print.h>
+#endif
 
 extern keymap_config_t keymap_config;
 
@@ -28,6 +31,7 @@ enum layer_number {
     _QWERTY = 0,
     _COLEMAK,
     _DVORAK,
+    _EUCALYN,
     _KEYPAD,
     _AUX,
     _KAUX,
@@ -41,6 +45,7 @@ enum custom_keycodes {
   QWERTY = SAFE_RANGE,
   COLEMAK,
   DVORAK,
+  EUCALYN,
   KEYPAD,
   EISU,
   KANA,
@@ -72,7 +77,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
    * | Shift|   Z  |   X  |   C  |   V  |   B  |   `  |   '  |   N  |   M  |   ,  |   .  |   /  | Shift|
    * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-   * |Lower | Lower| Caps  | GUI  | Alt | Space|  BS  | Enter| Space| Alt  | GUI  | Menu |Lower |Lower |
+   * |Lower | Lower| Caps |  Alt |  GUI | Space|  BS  | Enter| Space| GUI  | Alt  | Menu |Lower |Lower |
    * `-------------------------------------------------------------------------------------------------'
    */
   [_QWERTY] = LAYOUT( \
@@ -94,7 +99,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
    * | Shift|   Z  |   X  |   C  |   V  |   B  |   `  |   '  |   K  |   M  |   ,  |   .  |   /  | Shift|
    * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-   * |Lower | Lower| Caps  | GUI  | Alt | Space|  BS  | Enter| Space| Alt  | GUI  | Menu |Lower |Lower |
+   * |Lower | Lower| Caps |  Alt |  GUI | Space|  BS  | Enter| Space| GUI  | Alt  | Menu |Lower |Lower |
    * `-------------------------------------------------------------------------------------------------'
    */
   [_COLEMAK] = LAYOUT( \
@@ -116,7 +121,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
    * | Shift|   ;  |   Q  |   J  |   K  |   X  |   `  |   /  |   B  |   M  |   W  |   V  |   Z  | Shift|
    * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-   * |Lower | Lower| Caps  | GUI  | Alt | Space|  BS  | Enter| Space| Alt  | GUI  | Menu |Lower |Lower |
+   * |Lower | Lower| Caps |  Alt |  GUI | Space|  BS  | Enter| Space| GUI  | Alt  | Menu |Lower |Lower |
    * `-------------------------------------------------------------------------------------------------'
    */
   [_DVORAK] = LAYOUT( \
@@ -128,6 +133,28 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                                          LT(_RAISE,KC_ENT), KC_SPC,  KC_RGUI, KC_RALT, KC_APP,MO(_LOWER),MO(_LOWER) \
       ),
 
+  /* Eucalyn (http://eucalyn.hatenadiary.jp/entry/about-eucalyn-layout)
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * | ESC  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Bksp |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Tab  |   Q  |   W  |   ,  |   .  |   ;  |             |   M  |   R  |   D  |   Y  |   P  |  \   |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Ctrl |   A  |   O  |   E  |   I  |   U  |             |   G  |   T  |   K  |   S  |   N  | Ctrl |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * | Shift|   Z  |   X  |   C  |   V  |   F  |   `  |   '  |   B  |   H  |   J  |   L  |   /  | Shift|
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * |Lower | Lower| Caps |  Alt |  GUI | Space|  BS  | Enter| Space| GUI  | Alt  | Menu |Lower |Lower |
+   * `-------------------------------------------------------------------------------------------------'
+   */
+  [_EUCALYN] = LAYOUT( \
+      KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+      KC_TAB,  KC_Q,    KC_W,    KC_COMM, KC_DOT,  KC_SCLN,                   KC_M,    KC_R,    KC_D,    KC_Y,    KC_P,    KC_BSLS, \
+      KC_LCTL, KC_A,    KC_O,    KC_E,    KC_I,    KC_U,                      KC_G,    KC_T,    KC_K,    KC_S,    KC_N,    KC_RCTL, \
+      KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_F,   KC_GRV,  KC_QUOT,  KC_B,    KC_H,    KC_J,    KC_L,    KC_SLSH, KC_RSFT, \
+      MO(_LOWER),MO(_LOWER),  KC_CAPS, KC_LALT, KC_LGUI, KC_SPC,  LT(_RAISE,KC_BSPC), \
+                                                         LT(_RAISE,KC_ENT), KC_SPC,  KC_RGUI, KC_RALT, KC_APP,MO(_LOWER),MO(_LOWER) \
+      ),
+
   /* Keypad
    * ,-----------------------------------------.             ,-----------------------------------------.
    * | Tab  |   /  |   *  | Del  |  F1  |  F6  |             |  F1  |  F6  | Del  | Tab  |   /  |   *  |
@@ -239,7 +266,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   /* Adjust (Lower + Raise)
    * ,-----------------------------------------.             ,-----------------------------------------.
-   * |      |      |Keypad|Dvorak|Colemk|Qwerty|             |Qwerty|Colemk|Dvorak|Keypad|      |      |
+   * |      |Keypad|Dvorak|Colemk|Euclyn|Qwerty|             |Qwerty|Euclyn|Colemk|Dvorak|Keypad|      |
    * |------+------+------+------+------+------|             |------+------+------+------+------+------|
    * |      | Reset|RGBRST|RGB ON|Aud on| Win  |             | Win  |Aud on|RGB ON|RGBRST|      |      |
    * |------+------+------+------+------+------|             |------+------+------+------+------+------|
@@ -251,7 +278,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * `-------------------------------------------------------------------------------------------------'
    */
   [_ADJUST] =  LAYOUT( \
-      XXXXXXX, XXXXXXX, KEYPAD,   DVORAK, COLEMAK,  QWERTY,                   QWERTY,  COLEMAK,  DVORAK,  KEYPAD, XXXXXXX, XXXXXXX, \
+      XXXXXXX, KEYPAD,  DVORAK,  COLEMAK, EUCALYN,  QWERTY,                   QWERTY,  EUCALYN, COLEMAK,  DVORAK,  KEYPAD, XXXXXXX, \
       XXXXXXX, RESET,   RGBRST,  RGB_TOG,   AU_ON, AG_SWAP,                   AG_SWAP,   AU_ON, RGB_TOG,  RGBRST, XXXXXXX, XXXXXXX, \
       RGB_HUI, RGB_SAI, RGB_VAI,RGB_SMOD,  AU_OFF, AG_NORM,                   AG_NORM,  AU_OFF,RGB_SMOD, RGB_VAI, RGB_SAI, RGB_HUI, \
       RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, RGB_VAD, RGB_SAD, RGB_HUD, \
@@ -304,23 +331,25 @@ uint32_t default_layer_state_set_kb(uint32_t state) {
     current_default_layer = state - 1;
     // 1<<_DVORAK  - 2 == 4 - 2 == _DVORAK (=2)
     if ( current_default_layer == 3 ) current_default_layer -= 1;
-    // 1<<_KEYPAD  - 5 == 8 - 5 == _KEYPAD (=3)
+    // 1<<_EUCALYN - 5 == 8 - 5 == _EUCALYN (=3)
     if ( current_default_layer == 7 ) current_default_layer -= 4;
+    // 1<<_KEYPAD  - 12 == 16 - 12 == _KEYPAD (=4)
+    if ( current_default_layer == 15 ) current_default_layer -= 11;
     return state;
 }
 
 void update_base_layer(int base)
 {
     if( current_default_layer != base ) {
-	eeconfig_update_default_layer(1UL<<base);
-	default_layer_set(1UL<<base);
-	layer_off(_AUX);
-	layer_off(_KAUX);
+        eeconfig_update_default_layer(1UL<<base);
+        default_layer_set(1UL<<base);
+        layer_off(_AUX);
+        layer_off(_KAUX);
     } else {
-	if( base < _KEYPAD )
-	    layer_invert(_AUX);
-	else
-	    layer_invert(_KAUX);
+        if( base < _KEYPAD )
+            layer_invert(_AUX);
+        else
+            layer_invert(_KAUX);
     }
 }
 
@@ -331,7 +360,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         #ifdef AUDIO_ENABLE
           PLAY_SONG(tone_qwerty);
         #endif
-	update_base_layer(_QWERTY);
+        update_base_layer(_QWERTY);
       }
       return false;
       break;
@@ -340,7 +369,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         #ifdef AUDIO_ENABLE
           PLAY_SONG(tone_colemak);
         #endif
-	update_base_layer(_COLEMAK);
+        update_base_layer(_COLEMAK);
       }
       return false;
       break;
@@ -349,7 +378,16 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         #ifdef AUDIO_ENABLE
           PLAY_SONG(tone_dvorak);
         #endif
-	update_base_layer(_DVORAK);
+        update_base_layer(_DVORAK);
+      }
+      return false;
+      break;
+    case EUCALYN:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_SONG(tone_dvorak);
+        #endif
+        update_base_layer(_EUCALYN);
       }
       return false;
       break;
@@ -358,7 +396,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         #ifdef AUDIO_ENABLE
           PLAY_SONG(tone_dvorak);
         #endif
-	update_base_layer(_KEYPAD);
+        update_base_layer(_KEYPAD);
       }
       return false;
       break;
@@ -468,10 +506,10 @@ static void render_logo(struct CharacterMatrix *matrix) {
   char buf[30];
   if(rgblight_config.enable) {
       snprintf(buf, sizeof(buf), " LED %2d: %d,%d,%d ",
-	       rgblight_config.mode,
-	       rgblight_config.hue/RGBLIGHT_HUE_STEP,
-	       rgblight_config.sat/RGBLIGHT_SAT_STEP,
-	       rgblight_config.val/RGBLIGHT_VAL_STEP);
+               rgblight_config.mode,
+               rgblight_config.hue/RGBLIGHT_HUE_STEP,
+               rgblight_config.sat/RGBLIGHT_SAT_STEP,
+               rgblight_config.val/RGBLIGHT_VAL_STEP);
       matrix_write(matrix, buf);
   }
 #endif
@@ -481,6 +519,7 @@ static void render_logo(struct CharacterMatrix *matrix) {
 static const char Qwerty_name[]  PROGMEM = " Qwerty";
 static const char Colemak_name[] PROGMEM = " Colemak";
 static const char Dvorak_name[]  PROGMEM = " Dvorak";
+static const char Eucalyn_name[] PROGMEM = " Eucalyn";
 static const char Keypad_name[]  PROGMEM = " Keypad";
 
 static const char AUX_name[]     PROGMEM = ":AUX";
@@ -494,6 +533,7 @@ static const char *layer_names[] = {
     [_QWERTY] = Qwerty_name,
     [_COLEMAK] = Colemak_name,
     [_DVORAK] = Dvorak_name,
+    [_EUCALYN]= Eucalyn_name,
     [_KEYPAD] = Keypad_name,
     [_AUX]    = AUX_name,
     [_KAUX]   = KAUX_name,
@@ -526,18 +566,18 @@ void render_status(struct CharacterMatrix *matrix) {
        lstate && name_num < sizeof(layer_names)/sizeof(char *);
        lstate >>=1, name_num++ ) {
       if( (lstate & 1) != 0 ) {
-	  if( layer_names[name_num] ) {
-	      matrix_write_P(matrix, layer_names[name_num]);
-	  }
+          if( layer_names[name_num] ) {
+              matrix_write_P(matrix, layer_names[name_num]);
+          }
       }
   }
 
   // Host Keyboard LED Status
   char led[40];
     snprintf(led, sizeof(led), "\n%s  %s  %s",
-            (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
-            (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
-            (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
+             (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
+             (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
+             (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
   matrix_write(matrix, led);
 }
 

keyboards/helix/rev2/keymaps/five_rows/rules.mk

@@ -6,8 +6,12 @@
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+CONSOLE_ENABLE = no        # Console for debug
 COMMAND_ENABLE = no        # Commands for debug and configuration
+# CONSOLE_ENABLE and COMMAND_ENABLE
+#      yes, no  +1500
+#      yes, yes +3200
+#      no,  yes +400
 NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
 MIDI_ENABLE = no            # MIDI controls
@@ -66,6 +70,9 @@ ifneq ($(strip $(HELIX)),)
   ifeq ($(findstring ios,$(HELIX)), ios)
     IOS_DEVICE_ENABLE = yes
   endif
+  ifeq ($(findstring console,$(HELIX)), console)
+    CONSOLE_ENABLE = yes
+  endif
   $(eval $(call HELIX_CUSTOMISE_MSG))
   $(info )
 endif
@@ -100,7 +107,7 @@ ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
 endif
 
 ifeq ($(strip $(LED_ANIMATIONS)), yes)
-    OPT_DEFS += -DRGBLIGHT_ANIMATIONS
+    OPT_DEFS += -DLED_ANIMATIONS
 endif
 
 ifeq ($(strip $(OLED_ENABLE)), yes)
@@ -115,6 +122,10 @@ ifeq ($(strip $(Link_Time_Optimization)),yes)
     EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization
 endif
 
+ifeq ($(strip $(CONSOLE_ENABLE)),yes)
+    EXTRAFLAGS += -DCONSOLE_ENABLE
+endif
+
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 

keyboards/helix/rev2/keymaps/five_rows_jis/config.h

@@ -23,9 +23,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 // place overrides here
 
-// if you need more program area, try uncomment follow line
-//#include "serial_config_simpleapi.h"
-
 #ifdef MOUSEKEY_ENABLE
   #undef MOUSEKEY_INTERVAL
   #define MOUSEKEY_INTERVAL 0
@@ -43,4 +40,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
   #define MOUSEKEY_DELAY 0
 #endif
 
+// If you need more program area, try select and reduce rgblight modes to use.
+
+// Selection of RGBLIGHT MODE to use.
+#if defined(LED_ANIMATIONS)
+   #define RGBLIGHT_EFFECT_BREATHING
+   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+   #define RGBLIGHT_EFFECT_SNAKE
+   #define RGBLIGHT_EFFECT_KNIGHT
+   #define RGBLIGHT_EFFECT_CHRISTMAS
+   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+   //#define RGBLIGHT_EFFECT_RGB_TEST
+   //#define RGBLIGHT_EFFECT_ALTERNATING
+#endif
+
 #endif /* CONFIG_USER_H */

keyboards/helix/rev2/keymaps/five_rows_jis/rules.mk

@@ -100,7 +100,7 @@ ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
 endif
 
 ifeq ($(strip $(LED_ANIMATIONS)), yes)
-    OPT_DEFS += -DRGBLIGHT_ANIMATIONS
+    OPT_DEFS += -DLED_ANIMATIONS
 endif
 
 ifeq ($(strip $(OLED_ENABLE)), yes)

keyboards/helix/rev2/keymaps/froggy/config.h

@@ -21,12 +21,24 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
 
-// if you need more program area, try uncomment follow line
-//#include "serial_config_simpleapi.h"
-
 #undef TAPPING_TERM
 #define TAPPING_TERM 200
 #define ONESHOT_TAP_TOGGLE 5 /* Tapping this number of times holds the key until tapped this number of times again. */
 #define ONESHOT_TIMEOUT 5000 /* Time (in ms) before the one shot key is released */
 
+// If you need more program area, try select and reduce rgblight modes to use.
+
+// Selection of RGBLIGHT MODE to use.
+#if defined(LED_ANIMATIONS)
+   #define RGBLIGHT_EFFECT_BREATHING
+   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+   #define RGBLIGHT_EFFECT_SNAKE
+   #define RGBLIGHT_EFFECT_KNIGHT
+   #define RGBLIGHT_EFFECT_CHRISTMAS
+   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+   //#define RGBLIGHT_EFFECT_RGB_TEST
+   //#define RGBLIGHT_EFFECT_ALTERNATING
+#endif
+
 #endif /* CONFIG_USER_H */

keyboards/helix/rev2/keymaps/froggy/keymap.c

@@ -399,7 +399,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
       #ifdef RGBLIGHT_ENABLE
         if (record->event.pressed) {
           RGBAnimation = true;
-          rgblight_mode(6);
+          rgblight_mode(RGBLIGHT_MODE_RAINBOW_MOOD);
           RGB_current_mode = rgblight_config.mode;
         }
       #endif
@@ -408,7 +408,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
       #ifdef RGBLIGHT_ENABLE
         if (record->event.pressed) {
           RGBAnimation = true;
-          rgblight_mode(10);
+          rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 1);
           RGB_current_mode = rgblight_config.mode;
         }
       #endif
@@ -417,7 +417,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
       #ifdef RGBLIGHT_ENABLE
         if (record->event.pressed) {
           RGBAnimation = true;
-          rgblight_mode(21);
+          rgblight_mode(RGBLIGHT_MODE_KNIGHT);
           RGB_current_mode = rgblight_config.mode;
         }
       #endif
@@ -508,7 +508,7 @@ void led_ripple_effect(char r, char g, char b) {
 
     if (scan_count == -1) {
       rgblight_enable_noeeprom();
-      rgblight_mode(0);
+      rgblight_mode(RGBLIGHT_MODE_STATIC_LIGHT);
     } else if (scan_count >= 0 && scan_count < 5) {
       for (unsigned char c=keybuf_begin; c!=keybuf_end; c++) {
         int i = c;

keyboards/helix/rev2/keymaps/froggy/rules.mk

@@ -100,7 +100,7 @@ ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
 endif
 
 ifeq ($(strip $(LED_ANIMATIONS)), yes)
-    OPT_DEFS += -DRGBLIGHT_ANIMATIONS
+    OPT_DEFS += -DLED_ANIMATIONS
 endif
 
 ifeq ($(strip $(OLED_ENABLE)), yes)

keyboards/helix/rev2/keymaps/led_test/config.h

@@ -26,14 +26,16 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // If you need more program area, try select and reduce rgblight modes to use.
 
 // Selection of RGBLIGHT MODE to use.
-#undef RGBLIGHT_EFFECT_BREATHING
-#undef RGBLIGHT_EFFECT_RAINBOW_MOOD
-#undef RGBLIGHT_EFFECT_RAINBOW_SWIRL
-#undef RGBLIGHT_EFFECT_SNAKE
-#undef RGBLIGHT_EFFECT_KNIGHT
-#undef RGBLIGHT_EFFECT_CHRISTMAS
-#undef RGBLIGHT_EFFECT_STATIC_GRADIENT
-//#undef RGBLIGHT_EFFECT_RGB_TEST // led_test keymap need only this.
-#undef RGBLIGHT_EFFECT_ALTERNATING
+#if defined(LED_ANIMATIONS)
+   //#define RGBLIGHT_EFFECT_BREATHING
+   //#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+   //#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+   //#define RGBLIGHT_EFFECT_SNAKE
+   //#define RGBLIGHT_EFFECT_KNIGHT
+   //#define RGBLIGHT_EFFECT_CHRISTMAS
+   //#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+   #define RGBLIGHT_EFFECT_RGB_TEST   // led_test keymap need only this.
+   //#define RGBLIGHT_EFFECT_ALTERNATING
+#endif
 
 #endif /* CONFIG_USER_H */

keyboards/helix/rev2/keymaps/led_test/rules.mk

@@ -100,7 +100,7 @@ ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
 endif
 
 ifeq ($(strip $(LED_ANIMATIONS)), yes)
-    OPT_DEFS += -DRGBLIGHT_ANIMATIONS
+    OPT_DEFS += -DLED_ANIMATIONS
 endif
 
 ifeq ($(strip $(OLED_ENABLE)), yes)

keyboards/helix/rev2/keymaps/yshrsmz/config.h

@@ -21,3 +21,18 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* auto shift config */
 #define AUTO_SHIFT_TIMEOUT 150
+
+// If you need more program area, try select and reduce rgblight modes to use.
+
+// Selection of RGBLIGHT MODE to use.
+#if defined(LED_ANIMATIONS)
+   #define RGBLIGHT_EFFECT_BREATHING
+   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+   #define RGBLIGHT_EFFECT_SNAKE
+   #define RGBLIGHT_EFFECT_KNIGHT
+   #define RGBLIGHT_EFFECT_CHRISTMAS
+   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+   //#define RGBLIGHT_EFFECT_RGB_TEST
+   //#define RGBLIGHT_EFFECT_ALTERNATING
+#endif

keyboards/helix/rev2/keymaps/yshrsmz/keymap.c

@@ -312,7 +312,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         } else {
           TOG_STATUS = !TOG_STATUS;
           #ifdef RGBLIGHT_ENABLE
-            //rgblight_mode(16);
+            //rgblight_mode(RGBLIGHT_MODE_SNAKE + 1);
           #endif
         }
         layer_on(_LOWER);
@@ -335,7 +335,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         } else {
           TOG_STATUS = !TOG_STATUS;
           #ifdef RGBLIGHT_ENABLE
-            //rgblight_mode(15);
+            //rgblight_mode(RGBLIGHT_MODE_SNAKE);
           #endif
         }
         layer_on(_RAISE);
@@ -450,7 +450,7 @@ void music_scale_user(void)
 
 // hook point for 'led_test' keymap
 //   'default' keymap's led_test_init() is empty function, do nothing
-//   'led_test' keymap's led_test_init() force rgblight_mode_noeeprom(35);
+//   'led_test' keymap's led_test_init() force rgblight_mode_noeeprom(RGBLIGHT_MODE_RGB_TEST);
 __attribute__ ((weak))
 void led_test_init(void) {}
 

keyboards/helix/rev2/keymaps/yshrsmz/rules.mk

@@ -99,7 +99,7 @@ ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
 endif
 
 ifeq ($(strip $(LED_ANIMATIONS)), yes)
-    OPT_DEFS += -DRGBLIGHT_ANIMATIONS
+    OPT_DEFS += -DLED_ANIMATIONS
 endif
 
 ifeq ($(strip $(OLED_ENABLE)), yes)

keyboards/iris/keymaps/gsigler/config.h

@@ -0,0 +1,33 @@
+/*
+Copyright 2018 Grady Sigler <gradysigler@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+#define AUTO_SHIFT_TIMEOUT 95
+#define ONESHOT_TAP_TOGGLE 5  /* Tapping this number of times holds the key until tapped this number of times again. */
+#define ONESHOT_TIMEOUT 5000  /* Time (in ms) before the one shot key is released */

keyboards/iris/keymaps/gsigler/keymap.c

@@ -0,0 +1,74 @@
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+enum iris_layers {
+  _QWERTY,
+  _LOWER,
+  _RAISE
+};
+
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                          ┌────────┬────────┬────────┬────────┬────────┬────────┐
+  //|   `/~  |   1    |   2    |   3    |    4   |    5   |                          |    6   |   7    |   8    |   9    |   0    |   _/-  |
+      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                               KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+  //|  TAB   |   Q    |   W    |   E    |    R   |    T   |                          |    Y   |   U    |   I    |   O    |   P    |   +/=  |
+     KC_TAB,   KC_Q,     KC_W,     KC_E,   KC_R,    KC_T,                               KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_EQL,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+  //| RAISE  |   A    |   S    |   D    |    F   |    G   |                          |    H   |   J    |   K    |   L    |   :/;  |   "/'  |
+      RAISE,   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                               KC_H,    KC_J,    KC_K,    KC_L,   KC_SCLN, KC_QUOT,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐        ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+  //| LOWER  |   Z    |   X    |   C    |    V   |    B   |   ESC  |        | ALT    |    N   |   M    |   </,  |  >/.   |  ?-/   |   |-\  |
+      LOWER,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,   KC_ESC,            KC_LALT,  KC_N,    KC_M,  KC_COMM, KC_DOT,   KC_SLSH, KC_BSLS,
+  //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘        └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘
+  //                               |  CTRL  | COMMAND| BKSPACE|                 | SPACE  |  ENTER | SHIFT  |
+                                     KC_LCTL, KC_LGUI, KC_BSPC,                    KC_SPC,  KC_ENT,  KC_LSFT
+                                // └────────┴────────┴────────┘                 └────────┴────────┴────────┘
+  ),
+//KC_LALT  ALT
+  [_RAISE] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                          ┌────────┬────────┬────────┬────────┬────────┬────────┐
+  //|  `/~   |   F1   |   F2   |   F3   |    F4  |   F5   |                          |   F6   |   F7   |   F8   |   F9   |   F10  |   F11  |
+     KC_TRNS,  KC_F1,    KC_F2,  KC_F3,   KC_F4,   KC_F5,                              KC_F6,    KC_F7,   KC_F8,  KC_F9,   KC_F10,  KC_F11,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+  //|  TAB   |    !   |    @   |   {    |   }    |    |   |                          |        |        |   ↑    |        |        |   F12  |
+     KC_TRNS, KC_EXLM,   KC_AT,  KC_LCBR, KC_RCBR, KC_PIPE,                           XXXXXXX, XXXXXXX,  KC_UP,  XXXXXXX, XXXXXXX, KC_F12,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+  //|  RAISE |    #   |    $   |   (    |   )    |    `   |                          |   ?    |    ←   |   ↓    |    →   |        |  VOLUP |
+      KC_TRNS,  KC_HASH, KC_DLR, KC_LPRN, KC_RPRN,  KC_GRV,                            KC_QUES, KC_LEFT,KC_DOWN, KC_RGHT, XXXXXXX,  KC__VOLUP,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐        ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+  //|        |    %   |    ^   |   [    |   ]    |    ~   |  ESC            | ALT  |    &   |        |        |        |  MUTE  |  VOLDN |
+     XXXXXXX, KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD,  KC_TRNS,          KC_TRNS, KC_AMPR, XXXXXXX, XXXXXXX,XXXXXXX, KC__MUTE,KC__VOLDOWN,
+  //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘        └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘
+  //                               |  CTRL  | COMMAND| BKSPACE|                 | SPACE  |  ENTER | SHIFT|
+                                    KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,  KC_TRNS, KC_TRNS
+                                // └────────┴────────┴────────┘                 └────────┴────────┴────────┘
+  ),
+
+  [_LOWER] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                          ┌────────┬────────┬────────┬────────┬────────┬────────┐
+  //|        |        |        |        |        |        |                          |        |   7    |    8   |    9   |    *   |    /   |
+     KC_ASUP, KC_ASON, KC_ASRP,  XXXXXXX, XXXXXXX, XXXXXXX,                           XXXXXXX,   KC_P7,   KC_P8,   KC_P9,  KC_PAST, KC_PSLS,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+  //|        |        |        |        |        |        |                          |        |    4   |    5   |    6   |    +   |    -    |
+     KC_ASDN, KC_ASOFF, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX,                            XXXXXXX,  KC_P4,   KC_P5,   KC_P6,  KC_PPLS, KC_PMNS,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+  //|        |        |        |        |        |        |                          |        |    1   |    2   |    3   |        |        |
+     XXXXXXX, KC_ASTG, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                             XXXXXXX,  KC_P1,   KC_P2,   KC_P3,  XXXXXXX, XXXXXXX,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐        ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+  //| LOWER  |        |        |        |        |        |  ESC   |        | ALT    |        |   0    |    .   | ENTER  |   =    |        |
+      KC_TRNS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_TRNS,         KC_TRNS,  XXXXXXX, KC_P0,   KC_PDOT, KC_PENT, KC_PEQL, XXXXXXX,
+  //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘        └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘
+  //                               |  CTRL  | COMMAND| BKSPACE |                 | SPACE  | ENTER  | SHIFT  |
+                                    KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS
+                                // └────────┴────────┴────────┘                 └────────┴────────┴────────┘
+  ),
+
+};

keyboards/iris/keymaps/gsigler/rules.mk

@@ -0,0 +1,3 @@
+RGBLIGHT_ENABLE = yes
+BACKLIGHT_ENABLE = yes
+AUTO_SHIFT_ENABLE = yes

keyboards/jj40/keymaps/oscillope/backlight.c

@@ -1,60 +0,0 @@
-/**
- * Backlighting code for PS2AVRGB boards (ATMEGA32A)
- * Kenneth A. (github.com/krusli | krusli.me)
- */
-
-#include "quantum.h"
-
-#include <avr/pgmspace.h>
-#include <avr/interrupt.h>
-
-// Port D: digital pins of the AVR chipset
-#define NUMLOCK_PORT    (1 << 0)  // D0
-#define CAPSLOCK_PORT   (1 << 1)  // D1
-#define BACKLIGHT_PORT  (1 << 4)  // D4
-#define SCROLLLOCK_PORT (1 << 6)  // D6
-
-/**
- * References
- * Port Registers: https://www.arduino.cc/en/Reference/PortManipulation
- * TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b
- * Timers: http://www.avrbeginners.net/architecture/timers/timers.html
- * 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/
- * PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware
- */
-
-// @Override
-// turn LEDs on and off depending on USB caps/num/scroll lock states.
-__attribute__ ((weak))
-void led_set_user(uint8_t usb_led) {
-/* It appears that these cause the v1 JJ40 PCB to hang.
- * I haven't looked into why, but I don't have any LEDs on my board anyway. */
-#if 0
-    if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-      // turn on
-      DDRD  |= NUMLOCK_PORT;
-      PORTD |= NUMLOCK_PORT;
-    } else {
-      // turn off
-      DDRD  &= ~NUMLOCK_PORT;
-      PORTD &= ~NUMLOCK_PORT;
-    }
-
-    if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-      DDRD  |= CAPSLOCK_PORT;
-      PORTD |= CAPSLOCK_PORT;
-    } else {
-      DDRD  &= ~CAPSLOCK_PORT;
-      PORTD &= ~CAPSLOCK_PORT;
-    }
-
-    if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-      DDRD  |= SCROLLLOCK_PORT;
-      PORTD |= SCROLLLOCK_PORT;
-    } else {
-      DDRD  &= ~SCROLLLOCK_PORT;
-      PORTD &= ~SCROLLLOCK_PORT;
-    }
-#endif
-}
-

keyboards/jj40/keymaps/oscillope/keymap.c

@@ -62,7 +62,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * ,-----------------------------------------------------------------------------------.
  * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  | F10  | F11  | F12  |
  * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Ins  |      |      |  ()  |  []  |  {}  | Left | Down |  Up  |Right |      |      |
+ * | Ins  |      |      |  ()  |  []  |  {}  | Home | PgDn | PgUp | End  |      |      |
  * |------+------+------+------+------+------|------+------+------+------+------+------|
  * |RESET | Back | Fwd  |      |      |      |      |      | Mute | Vol- | Vol+ |      |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
@@ -71,7 +71,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
 [_LOWER] = KEYMAP( \
   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, \
-  KC_INS,  _______, _______, CC_PRN,  CC_BRC,  CC_CBR,  KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______, _______, \
+  KC_INS,  _______, _______, CC_PRN,  CC_BRC,  CC_CBR,  KC_HOME, KC_PGDN, KC_PGUP, KC_END,  _______, _______, \
   RESET,   KC_WBAK, KC_WFWD, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, \
   _______, _______, _______, _______, KC_LOCK, _______, _______,          KC_MPRV, KC_MSTP, KC_MPLY, KC_MNXT \
 ),

keyboards/mint60/keymaps/default/keymap.c

@@ -31,7 +31,7 @@ extern rgblight_config_t rgblight_config;
 #define XXXXXXX KC_NO
 
 enum custom_keycodes {
-  RGBRST
+  RGBRST = SAFE_RANGE
 };
 
 

keyboards/mint60/keymaps/eucalyn/keymap.c

@@ -31,7 +31,7 @@ extern rgblight_config_t rgblight_config;
 #define XXXXXXX KC_NO
 
 enum custom_keycodes {
-  RGBRST
+  RGBRST = SAFE_RANGE
 };
 
 

keyboards/nyquist/keymaps/bramver/README.md

@@ -0,0 +1,100 @@
+# Nyquist Layout - rev 02
+
+Standard qwerty layout.  
+Limited emoji support and proper mouse settings.
+
+Mostly based off of my XD75 layout.
+
+## Keymap
+
+```
+
+/* Base
+ * ,-----------------------------------------. ,-----------------------------------------.
+ * | GEsc |   1  |   2  |   3  |   4  |   5  | |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  | |   Y  |   U  |   I  |   O  |   P  | Entr |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | LOW  |   A  |   S  |   D  |   F  |   G  | |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Shft |   Z  |   X  |   C  |   V  |   B  | |   N  |   M  |   ,  |   .  |   /  | Shft |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Ctrl | EMO  | Alt  | GUI  | SPCE |SP_LMS| |SP_RMS|SP_RMS| GUI  | Alt  | RAI  | Ctrl |
+ * `-----------------------------------------' `-----------------------------------------'
+ */
+
+
+ /* Lower
+ * ,-----------------------------------------. ,-----------------------------------------.
+ * | GESC |   !  |   @  |   #  |   $  |   %  | |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Tab  |   !  |   @  |   #  |   $  |   %  | |   ^  |   &  |   *  |   (  |   )  | Entr |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * |      |  \   |  -   |  =   |  [   |  ]   | |  [   |  ]   |  -   |  =   |  \   | Del  |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Shft |  ^Z  |  ^X  |  ^C  |  ^V  |      | | Play | Vol+ | Vol- | Mute | Next | Shft |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Ctrl |      | Alt  | GUI  |      |      | |      |      | GUI  | Alt  |      | Ctrl |
+ * `-----------------------------------------' `-----------------------------------------'
+ */
+
+
+/* Raise
+ * ,-----------------------------------------. .-----------------------------------------.
+ * | GESC |      |      |      |      |      | |      |   =  |   /  |   *  |   -  | Bksp  |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Tab  |  F9  |  F10 | F11  | F12  |      | |      |   7  |   8  |   9  |   +  | Entr |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * |      |  F5  |  F6  |  F7  |  F8  |      | |      |   4  |   5  |   6  |  ,   | Del  |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Shft |  F1  |  F2  |  F3  |  F4  |      | |      |   1  |   2  |   3  |  .   | Shft |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Ctrl |      | Alt  | GUI  |      |      | |      |  0   | GUI  | Alt  |      | Ctrl |
+ * `-----------------------------------------' `-----------------------------------------'
+ */
+
+
+/* LMOUSE (Lower + Raise)
+ * ,-----------------------------------------. ,-----------------------------------------.
+ * | GESC |      | Home | End  | PGUP | PGDN | |      |      |      |      |      | Bksp |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Tab  | WH_L | BTN1 | MS_U | BTN2 | WH_U | |      |      |      |      |      | Entr |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * |      | WH_R | MS_L | MS_D | MS_R | WH_D | |      |      |      |      |      | Del  |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Shft | LEFT | DOWN |  UP  |RIGHT |      | |      |      |      |      |      | Shft |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Ctrl |      | Alt  | GUI  |      |      | |      |      | GUI  | Alt  |      | Ctrl |
+ * `-----------------------------------------' `-----------------------------------------'
+ */
+
+
+/* RMOUSE (Lower + Raise)
+ * ,-----------------------------------------. ,-----------------------------------------.
+ * | GESC |      |      |      |      |      | | PGUP | PGDN | Home | End  |      | Bksp |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Tab  |      |      |      |      |      | | WH_U | BTN1 | MS_U | BTN2 | WH_L | Entr |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * |      |      |      |      |      |      | | WH_D | MS_L | MS_D | MS_R | WH_R | Del  |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Shft |      |      |      |      |      | |      | LEFT | DOWN |  UP  |RIGHT | Shft |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Ctrl |      | Alt  | GUI  |      |      | |      |      | GUI  | Alt  |      | Ctrl |
+ * `-----------------------------------------' `-----------------------------------------'
+ */
+
+
+/* Emojis
+ * ,-----------------------------------------. ,-----------------------------------------.
+ * | GESC |      |      |      |      |      | | RSET |      |      |      |      | Bksp |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Tab  | CLAP | CUM  | BNIS | BUTT | CAR  | | FIRE | REDB | MONY | 100  | SOS | Entr |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * |      | CELE | PRAY | NAIL |  OK  | THNK | | UNAM | HEYE | COOL | EYES | SMIR | Del  |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Shft | TRIU | SCRM | VOMI | DTIV | EXPL | | HAIR | DANC | STRN | LEFT | RGHT | Shft |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Ctrl |      | Alt  | GUI  |      |      | |      |      | GUI  | Alt  |      | Ctrl |
+ * `-----------------------------------------' `-----------------------------------------'
+ */
+```

keyboards/nyquist/keymaps/bramver/config.h

@@ -0,0 +1,31 @@
+/* Copyright 2018 darm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define USE_SERIAL
+#define MASTER_LEFT
+
+#define TAPPING_TERM 200
+#define TAPPING_TOGGLE 2
+
+#define MOUSEKEY_DELAY             0
+#define MOUSEKEY_INTERVAL          16
+#define MOUSEKEY_MAX_SPEED         7
+#define MOUSEKEY_TIME_TO_MAX       60
+#define MOUSEKEY_WHEEL_MAX_SPEED   8
+#define MOUSEKEY_WHEEL_TIME_TO_MAX 40
+#define MOUSEKEY_WHEEL_DELAY 0

keyboards/nyquist/keymaps/bramver/keymap.c

@@ -0,0 +1,281 @@
+/* Copyright 2018 darm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BASE 0
+#define _LOWER 1
+#define _RAISE 2
+#define _LMOUSE 3
+#define _RMOUSE 4
+#define _EMOJI 5
+
+enum emoji_map {
+  UNAM, // unamused 😒
+  HEYE, // smiling face with heart shaped eyes 😍
+  OK, // ok hand sign 👌
+  SMIR, // smirk 😏
+  PRAY, // pray 🙏
+  CELE, // celebration 🙌
+  COOL, // smile with sunglasses 😎
+  EYES, // eyes
+  THNK, // BIG THONK
+  NAIL, // Nailcare
+  SOS, // Vuile sos
+  REDB, // Red B
+  HNDR, // 100
+  MONY,
+  FIRE,
+  CAR,
+  BUTT,
+  BNIS,
+  CUM,
+  CLAP,
+  TRIU, // Fart from nose
+  SCRM,
+  VOMI,
+  DTIV, // Detective
+  EXPL, // Brainsplosion
+  HAIR, // Haircut
+  DANC, // Salsa dancer
+  STRN, // Stronk
+  LEFT, // Point Left
+  RGHT, // Point Right
+};
+
+const uint32_t PROGMEM unicode_map[] = {
+  [UNAM] = 0x1F612,
+  [HEYE] = 0x1f60d,
+  [OK]   = 0x1F44C,
+  [SMIR] = 0x1F60F,
+  [PRAY] = 0x1F64F,
+  [CELE] = 0x1F64C,
+  [COOL] = 0x1F60E,
+  [EYES] = 0x1F440,
+  [THNK] = 0x1F914,
+  [NAIL] = 0x1F485,
+  [SOS] = 0x1F198,
+  [REDB] = 0x1F171,
+  [HNDR] = 0x1F4AF,
+  [MONY] = 0x1F480,
+  [FIRE] = 0x1F525,
+  [CAR] = 0x1F697,
+  [BUTT] = 0x1F351,
+  [BNIS] = 0x1F346,
+  [CUM] = 0x1F4A6,
+  [CLAP] = 0x1F44F,
+  [TRIU] = 0x1F624,
+  [SCRM] = 0x1F631,
+  [VOMI] = 0x1F92E,
+  [DTIV] = 0x1F575,
+  [EXPL] = 0x1F92F,
+  [HAIR] = 0x2640,
+  [DANC] = 0x1F483,
+  [STRN] = 0x1F4AA,
+  [LEFT] = 0x1F448,
+  [RGHT] = 0x1F449,
+};
+
+enum custom_keycodes {
+  CTRL_Z = SAFE_RANGE,
+  CTRL_X,
+  CTRL_C,
+  CTRL_V
+};
+
+// Enable these functions using FUNC(n) macro.
+// const uint16_t PROGMEM fn_actions[] = { //ACTION_LAYER_TAP_TOGGLE requires that number of taps be defined in *config.h* - default set to 5
+//     [0] = ,       //Hold for momentary LMouse layer, Tap for Space,
+//     [1] = ,      //Hold for momentary RMouse layer, Tap for Space,
+//     [2] = ,               //Hold for momentary Lower
+//     [3] = ,               //Hold for momentary Raise
+//     [4] = ,               //Hold for momentary Emoji
+//  };
+
+#define SP_LMS LT(_LMOUSE, KC_SPC)
+#define SP_RMS LT(_RMOUSE, KC_SPC)
+#define LOW TT(_LOWER)
+#define RAI TT(_RAISE)
+#define EMO TT(_EMOJI)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  /* Base
+   * ,-----------------------------------------. ,-----------------------------------------.
+   * | GEsc |   1  |   2  |   3  |   4  |   5  | |   6  |   7  |   8  |   9  |   0  | Bksp |
+   * |------+------+------+------+------+------| |------+------+------+------+------+------|
+   * | Tab  |   Q  |   W  |   E  |   R  |   T  | |   Y  |   U  |   I  |   O  |   P  | Entr |
+   * |------+------+------+------+------+------| |------+------+------+------+------+------|
+   * | LOW  |   A  |   S  |   D  |   F  |   G  | |   H  |   J  |   K  |   L  |   ;  |  "   |
+   * |------+------+------+------+------+------| |------+------+------+------+------+------|
+   * | Shft |   Z  |   X  |   C  |   V  |   B  | |   N  |   M  |   ,  |   .  |   /  | Shft |
+   * |------+------+------+------+------+------| |------+------+------+------+------+------|
+   * | Ctrl | EMO  | Alt  | GUI  | SPCE |SP_LMS| |SP_RMS|SP_RMS| GUI  | Alt  | RAI  | Ctrl |
+   * `-----------------------------------------' `-----------------------------------------'
+   */
+  [_BASE] = LAYOUT( \
+    KC_GESC ,   KC_1  ,   KC_2    ,   KC_3    ,   KC_4    ,   KC_5    , /**/    KC_6    ,   KC_7    ,   KC_8    ,   KC_9    , KC_0    ,   KC_BSPC , \
+    KC_TAB  ,   KC_Q  ,   KC_W    ,   KC_E    ,   KC_R    ,   KC_T    , /**/    KC_Y    ,   KC_U    ,   KC_I    ,   KC_O    , KC_P    ,   KC_ENT  , \
+    LOW     ,   KC_A  ,   KC_S    ,   KC_D    ,   KC_F    ,   KC_G    , /**/    KC_H    ,   KC_J    ,   KC_K    ,   KC_L    , KC_SCLN ,   KC_QUOT , \
+    KC_LSFT ,   KC_Z  ,   KC_X    ,   KC_C    ,   KC_V    ,   KC_B    , /**/    KC_N    ,   KC_M    ,   KC_COMM ,   KC_DOT  , KC_SLSH ,   KC_RSFT , \
+    KC_LCTL ,   EMO   ,   KC_LALT ,   KC_LGUI ,   KC_SPC  ,   SP_LMS  , /**/    SP_RMS  ,   KC_SPC  ,   KC_RGUI ,   KC_RALT , RAI     ,   KC_RCTL  \
+  ),
+
+
+  /* Lower
+   * ,-----------------------------------------. ,-----------------------------------------.
+   * | GESC |   !  |   @  |   #  |   $  |   %  | |   ^  |   &  |   *  |   (  |   )  | Bksp |
+   * |------+------+------+------+------+------| |------+------+------+------+------+------|
+   * | Tab  |   !  |   @  |   #  |   $  |   %  | |   ^  |   &  |   *  |   (  |   )  | Entr |
+   * |------+------+------+------+------+------| |------+------+------+------+------+------|
+   * |      |  \   |  -   |  =   |  [   |  ]   | |  [   |  ]   |  -   |  =   |  \   | Del  |
+   * |------+------+------+------+------+------| |------+------+------+------+------+------|
+   * | Shft |  ^Z  |  ^X  |  ^C  |  ^V  |      | | Play | Vol+ | Vol- | Mute | Next | Shft |
+   * |------+------+------+------+------+------| |------+------+------+------+------+------|
+   * | Ctrl |      | Alt  | GUI  |      |      | |      |      | GUI  | Alt  |      | Ctrl |
+   * `-----------------------------------------' `-----------------------------------------'
+   */
+  [_LOWER] = LAYOUT( \
+    TO(0)   ,   KC_EXLM ,   KC_AT   ,   KC_HASH ,   KC_DLR  ,   KC_PERC , /**/    KC_CIRC ,   KC_AMPR ,   KC_ASTR ,   KC_LPRN , KC_RPRN ,   _______ , \
+    _______ ,   KC_EXLM ,   KC_AT   ,   KC_HASH ,   KC_DLR  ,   KC_PERC , /**/    KC_CIRC ,   KC_AMPR ,   KC_ASTR ,   KC_LPRN , KC_RPRN ,   _______ , \
+    _______ ,   KC_RCBR ,   KC_MINS ,   KC_EQL  ,   KC_LBRC ,   KC_RBRC , /**/    KC_LBRC ,   KC_RBRC ,   KC_MINS ,   KC_EQL  , KC_BSLS ,   KC_DEL  , \
+    _______ ,   CTRL_Z  ,   CTRL_X  ,   CTRL_C  ,   CTRL_V  ,   XXXXXXX , /**/    KC_MPLY ,   KC_VOLU ,   KC_VOLD ,   KC_MUTE , KC_MNXT ,   _______ , \
+    _______ ,   XXXXXXX ,   _______ ,   _______ ,   _______ ,   XXXXXXX , /**/    XXXXXXX ,   _______ ,   _______ ,   _______ , XXXXXXX ,   _______  \
+  ),
+
+  /* Raise
+   * ,-----------------------------------------. .-----------------------------------------.
+   * | GESC |      |      |      |      |      | |      |   =  |   /  |   *  |   -  | Bksp  |
+   * |------+------+------+------+------+------| |------+------+------+------+------+------|
+   * | Tab  |  F9  |  F10 | F11  | F12  |      | |      |   7  |   8  |   9  |   +  | Entr |
+   * |------+------+------+------+------+------| |------+------+------+------+------+------|
+   * |      |  F5  |  F6  |  F7  |  F8  |      | |      |   4  |   5  |   6  |  ,   | Del  |
+   * |------+------+------+------+------+------| |------+------+------+------+------+------|
+   * | Shft |  F1  |  F2  |  F3  |  F4  |      | |      |   1  |   2  |   3  |  .   | Shft |
+   * |------+------+------+------+------+------| |------+------+------+------+------+------|
+   * | Ctrl |      | Alt  | GUI  |      |      | |      |  0   | GUI  | Alt  |      | Ctrl |
+   * `-----------------------------------------' `-----------------------------------------'
+   */
+
+  [_RAISE] = LAYOUT( \
+    TO(0)   ,   XXXXXXX ,   XXXXXXX ,   XXXXXXX ,   XXXXXXX ,   XXXXXXX , /**/  XXXXXXX ,   KC_EQL  ,   KC_SLSH ,   KC_ASTR ,   KC_MINS , _______ , \
+    _______ ,   KC_F9   ,   KC_F10  ,   KC_F11  ,   KC_F12  ,   XXXXXXX , /**/  XXXXXXX ,   KC_7    ,   KC_8    ,   KC_9    ,   KC_PLUS , _______ , \
+    XXXXXXX ,   KC_F5   ,   KC_F6   ,   KC_F7   ,   KC_F8   ,   XXXXXXX , /**/  XXXXXXX ,   KC_4    ,   KC_5    ,   KC_6    ,   KC_COMM , KC_DEL  , \
+    _______ ,   KC_F1   ,   KC_F2   ,   KC_F3   ,   KC_F4   ,   XXXXXXX , /**/  XXXXXXX ,   KC_1    ,   KC_2    ,   KC_3    ,   KC_DOT  , _______ , \
+    _______ ,   XXXXXXX ,   _______ ,   _______ ,   _______ ,   XXXXXXX , /**/  XXXXXXX ,   KC_0    ,   _______ ,   _______ ,   _______ , _______  \
+  ),
+
+  /* LMOUSE (Lower + Raise)
+   * ,-----------------------------------------. ,-----------------------------------------.
+   * | GESC |      | Home | End  | PGUP | PGDN | |      |      |      |      |      | Bksp |
+   * |------+------+------+------+------+------| |------+------+------+------+------+------|
+   * | Tab  | WH_L | BTN1 | MS_U | BTN2 | WH_U | |      |      |      |      |      | Entr |
+   * |------+------+------+------+------+------| |------+------+------+------+------+------|
+   * |      | WH_R | MS_L | MS_D | MS_R | WH_D | |      |      |      |      |      | Del  |
+   * |------+------+------+------+------+------| |------+------+------+------+------+------|
+   * | Shft | LEFT | DOWN |  UP  |RIGHT |      | |      |      |      |      |      | Shft |
+   * |------+------+------+------+------+------| |------+------+------+------+------+------|
+   * | Ctrl |      | Alt  | GUI  |      |      | |      |      | GUI  | Alt  |      | Ctrl |
+   * `-----------------------------------------' `-----------------------------------------'
+   */
+
+  [_LMOUSE] = LAYOUT( \
+    TO(0)   ,   XXXXXXX ,   KC_HOME ,   KC_END  ,   KC_PGUP ,   KC_PGDN , /**/  XXXXXXX ,   XXXXXXX ,   XXXXXXX ,   XXXXXXX ,   XXXXXXX , _______ , \
+    _______ ,   KC_WH_L ,   KC_BTN1 ,   KC_MS_U ,   KC_BTN2 ,   KC_WH_U , /**/  XXXXXXX ,   XXXXXXX ,   XXXXXXX ,   XXXXXXX ,   XXXXXXX , _______ , \
+    XXXXXXX ,   KC_WH_R ,   KC_MS_L ,   KC_MS_D ,   KC_MS_R ,   KC_WH_D , /**/  XXXXXXX ,   XXXXXXX ,   XXXXXXX ,   XXXXXXX ,   XXXXXXX , KC_DEL  , \
+    _______ ,   KC_LEFT ,   KC_DOWN ,   KC_UP   ,   KC_RGHT ,   XXXXXXX , /**/  XXXXXXX ,   XXXXXXX ,   XXXXXXX ,   XXXXXXX ,   XXXXXXX , _______ , \
+    _______ ,   XXXXXXX ,   _______ ,   _______ ,   _______ ,   _______ , /**/  XXXXXXX ,   _______ ,   _______ ,   _______ ,   XXXXXXX , _______  \
+  ),
+
+  /* RMOUSE (Lower + Raise)
+   * ,-----------------------------------------. ,-----------------------------------------.
+   * | GESC |      |      |      |      |      | | PGUP | PGDN | Home | End  |      | Bksp |
+   * |------+------+------+------+------+------| |------+------+------+------+------+------|
+   * | Tab  |      |      |      |      |      | | WH_U | BTN1 | MS_U | BTN2 | WH_L | Entr |
+   * |------+------+------+------+------+------| |------+------+------+------+------+------|
+   * |      |      |      |      |      |      | | WH_D | MS_L | MS_D | MS_R | WH_R | Del  |
+   * |------+------+------+------+------+------| |------+------+------+------+------+------|
+   * | Shft |      |      |      |      |      | |      | LEFT | DOWN |  UP  |RIGHT | Shft |
+   * |------+------+------+------+------+------| |------+------+------+------+------+------|
+   * | Ctrl |      | Alt  | GUI  |      |      | |      |      | GUI  | Alt  |      | Ctrl |
+   * `-----------------------------------------' `-----------------------------------------'
+   */
+
+  [_RMOUSE] = LAYOUT( \
+    TO(0)   , XXXXXXX ,   XXXXXXX ,   XXXXXXX ,   XXXXXXX ,   XXXXXXX , /**/  KC_PGUP ,   KC_PGDN ,   KC_HOME ,   KC_END  ,   XXXXXXX ,   _______ , \
+    _______ , XXXXXXX ,   XXXXXXX ,   XXXXXXX ,   XXXXXXX ,   XXXXXXX , /**/  KC_WH_U ,   KC_BTN1 ,   KC_MS_U ,   KC_BTN2 ,   KC_WH_L ,   _______ , \
+    XXXXXXX , XXXXXXX ,   XXXXXXX ,   XXXXXXX ,   XXXXXXX ,   XXXXXXX , /**/  KC_WH_D ,   KC_MS_L ,   KC_MS_D ,   KC_MS_R ,   KC_WH_R ,   KC_DEL  , \
+    _______ , XXXXXXX ,   XXXXXXX ,   XXXXXXX ,   XXXXXXX ,   XXXXXXX , /**/  XXXXXXX ,   KC_LEFT ,   KC_DOWN ,   KC_UP   ,   KC_RGHT ,   _______ , \
+    _______ , XXXXXXX ,   _______ ,   _______ ,   _______ ,   XXXXXXX , /**/  _______ ,   _______ ,   _______ ,   _______ ,   XXXXXXX ,   _______  \
+  ),
+
+  /* Emojis
+   * ,-----------------------------------------. ,-----------------------------------------.
+   * | GESC |      |      |      |      |      | | RSET |      |      |      |      | Bksp |
+   * |------+------+------+------+------+------| |------+------+------+------+------+------|
+   * | Tab  | CLAP | CUM  | BNIS | BUTT | CAR  | | FIRE | REDB | MONY | 100  | SOS | Entr |
+   * |------+------+------+------+------+------| |------+------+------+------+------+------|
+   * |      | CELE | PRAY | NAIL |  OK  | THNK | | UNAM | HEYE | COOL | EYES | SMIR | Del  |
+   * |------+------+------+------+------+------| |------+------+------+------+------+------|
+   * | Shft | TRIU | SCRM | VOMI | DTIV | EXPL | | HAIR | DANC | STRN | LEFT | RGHT | Shft |
+   * |------+------+------+------+------+------| |------+------+------+------+------+------|
+   * | Ctrl |      | Alt  | GUI  |      |      | |      |      | GUI  | Alt  |      | Ctrl |
+   * `-----------------------------------------' `-----------------------------------------'
+   */
+
+  [_EMOJI] = LAYOUT( \
+    TO(0)   , XXXXXXX     ,   XXXXXXX     ,   XXXXXXX     ,   XXXXXXX     ,   XXXXXXX     , /**/  RESET       ,   XXXXXXX     ,   XXXXXXX     ,   XXXXXXX     ,   XXXXXXX     ,   _______   , \
+    _______ , X(CLAP)     ,   X(CUM)      ,   X(BNIS)     ,   X(BUTT)     ,   X(CAR)      , /**/  X(FIRE)     ,   X(REDB)     ,   X(MONY)     ,   X(HNDR)     ,   X(SOS)      ,   _______   , \
+    XXXXXXX , X(CELE)     ,   X(PRAY)     ,   X(NAIL)     ,   X(OK)       ,   X(THNK)     , /**/  X(UNAM)     ,   X(HEYE)     ,   X(COOL)     ,   X(EYES)     ,   X(SMIR)     ,   KC_DEL    , \
+    _______ , X(TRIU)     ,   X(SCRM)     ,   X(VOMI)     ,   X(DTIV)     ,   X(EXPL)     , /**/  X(HAIR)     ,   X(DANC)     ,   X(STRN)     ,   X(LEFT)     ,   X(RGHT)     ,   _______   , \
+    _______ , _______     ,   _______     ,   _______     ,   _______     ,   XXXXXXX     , /**/  XXXXXXX     ,   _______     ,   _______     ,   _______     ,   XXXXXXX     ,   _______     \
+  ),
+
+};
+
+void matrix_init_user(void) {
+  set_unicode_input_mode(UC_LNX);
+};
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+
+  if (record->event.pressed) {
+    switch(keycode) {
+      case CTRL_Z:
+        SEND_STRING(SS_LCTRL("z"));
+        return false;
+      case CTRL_X:
+        SEND_STRING(SS_LCTRL("x"));
+        return false;
+      case CTRL_C:
+        SEND_STRING(SS_LCTRL("c"));
+        return false;
+      case CTRL_V:
+        SEND_STRING(SS_LCTRL("v"));
+        return false;
+    }
+  }
+
+  return true;
+}

keyboards/nyquist/keymaps/bramver/rules.mk

@@ -0,0 +1,6 @@
+# Build options
+MOUSEKEY_ENABLE = yes			# Emulates mouse key using keypresses
+EXTRAKEY_ENABLE = yes 		# Use system and audio control key codes
+TAP_DANCE_ENABLE = no 		# Use multi-tap features
+UNICODEMAP_ENABLE = yes  	# Emojify me pls
+NKRO_ENABLE = yes

keyboards/orange75/config.h

@@ -0,0 +1,35 @@
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEEB
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Fox-Lab
+#define PRODUCT         Orange75
+#define DESCRIPTION     Keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 15
+#define MATRIX_COLS 6
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { E6,F0, F1, F4, F5, F6, F7, C7, C6, B6, B4, D7, D4, D5, D6 }
+#define MATRIX_COL_PINS { D3, D2, D1, D0, B7, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B5
+#define BACKLIGHT_LEVELS 3
+
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE

keyboards/orange75/info.json

@@ -0,0 +1,96 @@
+{
+    "keyboard_name": "Orange75",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 16,
+    "height": 6.25,
+    "layouts": {
+        "LAYOUT": {
+            "key_count": 82,
+            "layout": [
+                {"label":"Esc", "x":0, "y":0},
+                {"label":"F1", "x":2, "y":0},
+                {"label":"F2", "x":3, "y":0},
+                {"label":"F3", "x":4, "y":0},
+                {"label":"F4", "x":5, "y":0},
+                {"label":"F5", "x":6.5, "y":0},
+                {"label":"F6", "x":7.5, "y":0},
+                {"label":"F7", "x":8.5, "y":0},
+                {"label":"F8", "x":9.5, "y":0},
+                {"label":"F9", "x":11, "y":0},
+                {"label":"F10", "x":12, "y":0},
+                {"label":"F11", "x":13, "y":0},
+                {"label":"F12", "x":14, "y":0},
+                {"label":"`", "x":0, "y":1.25},
+                {"label":"1", "x":1, "y":1.25},
+                {"label":"2", "x":2, "y":1.25},
+                {"label":"3", "x":3, "y":1.25},
+                {"label":"4", "x":4, "y":1.25},
+                {"label":"5", "x":5, "y":1.25},
+                {"label":"6", "x":6, "y":1.25},
+                {"label":"7", "x":7, "y":1.25},
+                {"label":"8", "x":8, "y":1.25},
+                {"label":"9", "x":9, "y":1.25},
+                {"label":"0", "x":10, "y":1.25},
+                {"label":"-", "x":11, "y":1.25},
+                {"label":"=", "x":12, "y":1.25},
+                {"label":"Delete", "x":13, "y":1.25},
+                {"label":"Back Space", "x":14, "y":1.25},
+                {"label":"Home", "x":15, "y":1.25},
+                {"label":"Tab", "x":0, "y":2.25, "w":1.5},
+                {"label":"Q", "x":1.5, "y":2.25},
+                {"label":"W", "x":2.5, "y":2.25},
+                {"label":"E", "x":3.5, "y":2.25},
+                {"label":"R", "x":4.5, "y":2.25},
+                {"label":"T", "x":5.5, "y":2.25},
+                {"label":"Y", "x":6.5, "y":2.25},
+                {"label":"U", "x":7.5, "y":2.25},
+                {"label":"I", "x":8.5, "y":2.25},
+                {"label":"O", "x":9.5, "y":2.25},
+                {"label":"P", "x":10.5, "y":2.25},
+                {"label":"[", "x":11.5, "y":2.25},
+                {"label":"]", "x":12.5, "y":2.25},
+                {"label":"\\", "x":13.5, "y":2.25, "w":1.5},
+                {"label":"End", "x":15, "y":2.25},
+                {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75},
+                {"label":"A", "x":1.75, "y":3.25},
+                {"label":"S", "x":2.75, "y":3.25},
+                {"label":"D", "x":3.75, "y":3.25},
+                {"label":"F", "x":4.75, "y":3.25},
+                {"label":"G", "x":5.75, "y":3.25},
+                {"label":"H", "x":6.75, "y":3.25},
+                {"label":"J", "x":7.75, "y":3.25},
+                {"label":"K", "x":8.75, "y":3.25},
+                {"label":"L", "x":9.75, "y":3.25},
+                {"label":";", "x":10.75, "y":3.25},
+                {"label":"'", "x":11.75, "y":3.25},
+                {"label":"Enter", "x":12.75, "y":3.25, "w":2.25},
+                {"label":"PgUp", "x":15, "y":3.25},
+                {"label":"Shift", "x":0, "y":4.25, "w":1.25},
+                {"label":"ISO\\", "x":1.25, "y":4.25},
+                {"label":"Z", "x":2.25, "y":4.25},
+                {"label":"X", "x":3.25, "y":4.25},
+                {"label":"C", "x":4.25, "y":4.25},
+                {"label":"V", "x":5.25, "y":4.25},
+                {"label":"B", "x":6.25, "y":4.25},
+                {"label":"N", "x":7.25, "y":4.25},
+                {"label":"M", "x":8.25, "y":4.25},
+                {"label":",", "x":9.25, "y":4.25},
+                {"label":".", "x":10.25, "y":4.25},
+                {"label":"/", "x":11.25, "y":4.25},
+                {"label":"Shift", "x":12.25, "y":4.25, "w":1.75},
+                {"label":"Up", "x":14, "y":4.25},
+                {"label":"PgDn", "x":15, "y":4.25},
+                {"label":"Ctrl", "x":0, "y":5.25, "w":1.25},
+                {"label":"GUI", "x":1.25, "y":5.25, "w":1.25},
+                {"label":"Alt", "x":2.5, "y":5.25, "w":1.25},
+                {"label":"Space", "x":3.75, "y":5.25, "w":6.25},
+                {"label":"Alt", "x":10, "y":5.25, "w":1.25},
+                {"label":"Fn", "x":11.25, "y":5.25, "w":1.25},
+                {"label":"Left", "x":13, "y":5.25},
+                {"label":"Down", "x":14, "y":5.25},
+                {"label":"Right", "x":15, "y":5.25}
+            ]
+        }
+    }
+}

keyboards/orange75/keymaps/default/keymap.c

@@ -0,0 +1,85 @@
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /*
+     * ,---------------------------------------------------------------.
+     * |Esc|▓▓▓|F1 |F2 |F3 |F4 |▓|F5 |F6 |F7 |F8 |▓|F9 |F10|F11|F12|▓▓▓|
+     * |---------------------------------------------------------------|
+     * |`  |1  |2  |3  |4  |5  |6  |7  |8  |9  |0  |-  |=  |Del|Bsp|Hm |
+     * |---------------------------------------------------------------|
+     * |Tab  |Q  |W  |E  |R  |T  |Y  |U  |I  |O  |P  |[  |]  |\    |End|
+     * |---------------------------------------------------------------|
+     * |Caps  |A  |S  |D  |F  |G  |H  |J  |K  |L  |;  |'  |Enter   |PgU|
+     * |---------------------------------------------------------------|
+     * |Shft|\  |Z  |X  |C  |V  |B  |N  |M  |,  |.  |/  |Shift |Up |PgD|
+     * |---------------------------------------------------------------|
+     * |Ctrl|GUI |Alt |Space                   |Alt |Fn  |▓|Lt |Dn |Rt |
+     * `---------------------------------------------------------------'
+    */
+    LAYOUT(
+        KC_ESC,                KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,       KC_F11,  KC_F12,
+        KC_GRV,  KC_1,         KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,      KC_EQL,  KC_DEL,  KC_BSPC, KC_HOME,
+        KC_TAB,  KC_Q,         KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,      KC_RBRC,          KC_BSLS, KC_END,
+        KC_CAPS, KC_A,         KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,                        KC_ENT,  KC_PGUP,
+        KC_LSFT, LT(1, KC_NO), KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,      KC_LSFT,          KC_UP,   KC_PGDN,
+        KC_LCTL, KC_LGUI,      KC_LALT,                            KC_SPC,                             KC_LALT, LT(1, KC_NO),          KC_LEFT, KC_DOWN, KC_RGHT
+        ),
+
+    /*
+     * ,---------------------------------------------------------------.
+     * |RST|▓▓▓|   |   |   |   |▓|   |   |   |   |▓|   |   |   |   |▓▓▓|
+     * |---------------------------------------------------------------|
+     * |`  |   |   |   |   |   |   |   |   |   |   |   |   |   |   |Tog|
+     * |---------------------------------------------------------------|
+     * |     |   |   |   |   |   |   |   |   |   |   |   |   |     |Stp|
+     * |---------------------------------------------------------------|
+     * |      |   |   |   |   |   |   |   |   |   |   |   |        |BL+|
+     * |---------------------------------------------------------------|
+     * |    |   |   |   |   |   |   |   |   |   |   |   |      |   |BL-|
+     * |---------------------------------------------------------------|
+     * |    |    |    |                        |    |    |▓|   |   |   |
+     * `---------------------------------------------------------------'
+    */
+    LAYOUT(
+        RESET,            _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_TOGG,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, BL_STEP,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______, BL_INC,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, BL_DEC,
+        _______, _______, _______,                            _______,                            _______, _______,          _______, _______, _______
+        )
+};
+
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+    if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+        DDRB |= (1 << 0); PORTB &= ~(1 << 0);
+    } else {
+        DDRB &= ~(1 << 0); PORTB &= ~(1 << 0);
+    }
+
+    if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+        DDRB |= (1 << 1); PORTB &= ~(1 << 1);
+    } else {
+        DDRB &= ~(1 << 1); PORTB &= ~(1 << 1);
+    }
+
+    if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+        DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+    } else {
+        DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+    }
+}

keyboards/orange75/orange75.c

@@ -0,0 +1 @@
+#include "orange75.h"

keyboards/orange75/orange75.h

@@ -0,0 +1,29 @@
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+	K000,       K002, K003, K004, K005,    K006, K007, K008, K009,    K010, K011, K012, K013, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K014, K113, K114, \
+	K200,    K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,    K213, K214, \
+	K300,     K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,         K312, K314, \
+	K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411,    K412,    K413, K414, \
+	K500, K501, K502,                   K506,                   K510, K511,       K512, K513, K514  \
+) { \
+    { K000,  K100,  K200, K300, K400, K500 }, \
+    { KC_NO, K101,  K201, K301, K401, K501 }, \
+    { K002,  K102,  K202, K302, K402, K502 }, \
+    { K003,  K103,  K203, K303, K403, KC_NO}, \
+    { K004,  K104,  K204, K304, K404, KC_NO}, \
+    { K005,  K105,  K205, K305, K405, KC_NO}, \
+    { K006,  K106,  K206, K306, K406, K506 }, \
+    { K007,  K107,  K207, K307, K407, KC_NO}, \
+    { K008,  K108,  K208, K308, K408, KC_NO}, \
+    { K009,  K109,  K209, K309, K409, KC_NO}, \
+    { K010,  K110,  K210, K310, K410, K510 }, \
+    { K011,  K111,  K211, K311, K411, K511 }, \
+    { K012,  K112,  K212, K312, K412, K512 }, \
+    { K013,  K113,  K213, KC_NO,K413, K513 }, \
+    { K014,  K114,  K214, K314, K414, K514 } \
+}
+

keyboards/orange75/readme.md

@@ -0,0 +1,16 @@
+# Orange75
+
+![Orange75](https://i.imgur.com/eAfiwwM.jpg)
+
+A 75% made by Fox Lab.
+
+Keyboard Maintainer: [captsis](https://github.com/captsis), [fox-lab](https://github.com/fox-lab)   
+Hardware Supported: Orange75 powered by the ATmega32U4  
+Hardware Availability: [zFrontier](https://en.zfrontier.com/collections/keyboards/products/foxlab-orange75), [Geekhack GB](https://geekhack.org/index.php?topic=95080.0)
+
+
+Make example for this keyboard (after setting up your build environment):
+
+    make orange75:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/orange75/rules.mk

@@ -0,0 +1,73 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes      # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = no

keyboards/planck/keymaps/default/config.h

@@ -1,7 +1,4 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "config_common.h"
+#pragma once
 
 #ifdef AUDIO_ENABLE
     #define STARTUP_SONG SONG(PLANCK_SOUND)
@@ -40,4 +37,3 @@
 // Most tactile encoders have detents every 4 stages
 #define ENCODER_RESOLUTION 4
 
-#endif

keyboards/planck/keymaps/default/keymap.c

@@ -14,8 +14,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "planck.h"
-#include "action_layer.h"
+#include QMK_KEYBOARD_H
 #include "muse.h"
 
 extern keymap_config_t keymap_config;
@@ -276,11 +275,21 @@ void encoder_update(bool clockwise) {
     }
   } else {
     if (clockwise) {
-      register_code(KC_PGDN);
-      unregister_code(KC_PGDN);
+      #ifdef MOUSEKEY_ENABLE
+        register_code(KC_MS_WH_DOWN);
+        unregister_code(KC_MS_WH_DOWN);
+      #else
+        register_code(KC_PGDN);
+        unregister_code(KC_PGDN);
+      #endif
     } else {
-      register_code(KC_PGUP);
-      unregister_code(KC_PGUP);
+      #ifdef MOUSEKEY_ENABLE
+        register_code(KC_MS_WH_UP);
+        unregister_code(KC_MS_WH_UP);
+      #else
+        register_code(KC_PGUP);
+        unregister_code(KC_PGUP);
+      #endif
     }
   }
 }

keyboards/planck/keymaps/jcorrado/keymap.c

@@ -0,0 +1,115 @@
+/* Copyright 2015-2017 Jack Humbert
+ * Copyright 2018 Jereme Corrado
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+enum {
+  _QWERTY = 0,
+  _NUM,
+  _SYM_L,
+  _SYM_R
+};
+
+#define LMOD_0 LT(_SYM_L, KC_TAB)  /* Tab, hold: Sym layer */
+#define LMOD_1 LT(_NUM, KC_ESC)    /* Esc, hold: Num layer */
+#define LMOD_2 LSFT_T(KC_CAPS)     /* Caps Lock, hold: Left Shift */
+
+#define RMOD_0 LT(_SYM_R, KC_BSPC) /* Backspace, hold: Sym layer */
+#define RMOD_1 LT(_NUM, KC_QUOT)   /* Quote, hold: Nu layer */
+#define RMOD_2 RSFT_T(KC_ENT)      /* Enter, hold: Right Shift */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/*
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | Tab/   | Q      | W      | E      | R      | T      | Y      | U      | I      | O      | P      | BacSp/ |
+ * | Sym    |        |        |        |        |        |        |        |        |        |        | Sym    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | Esc/   | A      | S      | D      | F      | G      | H      | J      | K      | L      | :      | "      |
+ * | Num    |        |        |        |        |        |        |        |        |        | ;      | '/Num  |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | CapLk/ | Z      | X      | C      | V      | B      | N      | M      | <      | >      | ?      | Shift/ |
+ * | Shift  |        |        |        |        |        |        |        | ,      | .      | /      | Enter  |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | Toggle | ~      | {pipe} | Alt    | Ctrl   | Space  | Space  | Ctrl   | Alt    | {      | }      |        |
+ * | Num    | `      | \      |        |        |        |        |        |        | [      | ]      |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ */
+
+[_QWERTY] = LAYOUT_planck_grid(
+  LMOD_0,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    RMOD_0,
+  LMOD_1,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, RMOD_1,
+  LMOD_2,  KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, RMOD_2,
+  _______, KC_GRV,  KC_BSLS, KC_LALT, KC_LCTL, KC_SPC,  KC_SPC,  KC_RCTL, KC_RALT, KC_LBRC, KC_RBRC, _______
+),
+
+
+/*
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | =      |      1 |      2 |      3 |      4 |      5 | 6      | 7      | 8      | 9      |      0 | -      |
+ * |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |        |        |        |        |        | Left   | Down   | Up     | Right  |        |        |
+ * |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |        |        |        |        |        | Home   | PgDown | PgUp   | End    |        |        |
+ * |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ */
+
+[_NUM] = LAYOUT_planck_grid(
+  KC_EQL,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,
+  _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______, _______,
+  _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END,  _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+),
+
+
+/*
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | +      | !      | @      | #      | $      | %      | ^      | &      | *      | (      | )      | _      |
+ * |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        | F1     | F2     | F3     | F4     | F5     | F6     |        |        |        |        |        |
+ * |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        | F7     | F8     | F9     | F10    | F11    | F12    |        |        |        |        |        |
+ * |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ */
+
+[_SYM_L] = LAYOUT_planck_grid(
+  _______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_UNDS,
+  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   _______, _______, _______, _______, _______,
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+),
+
+[_SYM_R] = LAYOUT_planck_grid(
+  KC_PLUS, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   _______, _______, _______, _______, _______,
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+)
+
+};

keyboards/planck/keymaps/jcorrado/readme.md

@@ -0,0 +1,9 @@
+# jcorrado Planck keymap
+
+A keymap for the Planck modeled after the way I remap my Kinesis
+Advantage keyboards.
+
+The layout is designed to minimize awkward contortions: all modifier and
+layer-activation combinations can be performed with either hand's thumb
+and pinky.  This leaves the other hand free to complete commands
+comfortably.

keyboards/planck/keymaps/vifon/keymap.c

@@ -1,11 +1,5 @@
 
-#pragma message "You may need to add LAYOUT_planck_grid to your keymap layers - see default for an example"
-#include "planck.h"
-#ifdef BACKLIGHT_ENABLE
-#  include "backlight.h"
-#endif
-#include "timer.h"
-#include <bootloader.h>
+#include QMK_KEYBOARD_H
 
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
@@ -27,90 +21,98 @@ enum planck_keycodes {
     KM_LW = SAFE_RANGE,
     KM_RS,
     KM_SHLK,                    /* ShiftLock */
+    KM_HOLD,                    /* Any-key Lock */
     KM_RST,                     /* Reset */
     KM_NUM,                     /* Numeric layer */
     KM_SLP,                     /* Sleep 250 ms */
-    KM_PPLR,                    /* Pure Pro layer */
+    KM_PP_GAME,                 /* Pure Pro Gaming layer */
+    KM_PP_HOLD,                 /* Pure Pro / PP Gaming layer */
     DYNAMIC_MACRO_RANGE,
 };
 
 #include "dynamic_macro.h"
 
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[_QW] = { /* Qwerty */
-    {KC_TAB,        KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,   KC_Y,   KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC},
-    {CTL_T(KC_ESC), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,   KC_H,   KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
-    {KC_LSFT,       KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,   KC_N,   KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_FN0 },
-    {KC_LCTL,       MO(_DYN),KC_LGUI, KC_LALT, KM_LW,   KC_SPC, KC_SPC, KM_RS,   KC_RALT, KC_DOWN, KC_UP,   KC_RCTL}
-},
-[_CM] = { /* Colemak */
-    {KC_TAB,        KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC},
-    {CTL_T(KC_ESC), KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT},
-    {KC_LSFT,       KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_FN0 },
-    {KC_LCTL,       MO(_DYN),KC_LGUI, KC_LALT, KM_LW,   KC_SPC,  KC_SPC,  KM_RS,   KC_RALT, KC_DOWN, KC_UP,   KC_RCTL}
-},
-[_PP] = { /* Pure Pro */
-    {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC},
-    {KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_ENT },
-    {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_RSFT, KC_UP,   KC_RCTL},
-    {KC_LCTL, MO(_DYN),KC_LGUI, KC_LALT, KM_LW,   KC_SPC,  KC_SPC,  KM_RS,   KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT}
-},
-[_PPG] = { /* Pure Pro: Gaming */
-    {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
-    {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
-    {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
-    {_______, _______, XXXXXXX, _______, KM_RS  , _______, _______, KM_LW  , _______, _______, _______, _______},
-},
-[_NM] = { /* Numeric */
-    {KC_TAB,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC},
-    {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
-    {KC_LSFT, _______, _______, _______, _______, _______, _______, _______, KC_COMM, KC_DOT,  _______, KC_FN0 },
-    {_______, _______, _______, _______, _______, KC_SPC,  KC_SPC,  _______, _______, _______, _______, _______}
-},
-[_LW]= { /* LOWER */
-    {KC_TILD, KC_EXLM,    KC_AT,      KC_HASH,    KC_DLR,     KC_PERC,    KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC},
-    {KC_ESC,  LGUI(KC_1), LGUI(KC_2), LGUI(KC_3), LGUI(KC_4), LGUI(KC_5), KM_NUM,  KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
-    {_______, LGUI(KC_6), LGUI(KC_7), LGUI(KC_8), LGUI(KC_9), LGUI(KC_0), KM_SLP,  KC_HOME, KC_PGDN, KC_PGUP, KC_END,  KC_ENT },
-    {_______, BL_TOGG,    _______,    _______,    _______,    KC_BTN1,    KC_BTN1, _______, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
-},
-[_RS]= { /* RAISE */
-    {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL },
-    {KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS},
-    {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  DF(_QW), DF(_CM), KM_PPLR, KM_RST,  KC_ENT },
-    {_______, BL_STEP, _______, _______, _______, KC_BTN2, KC_BTN2, _______, KC_MPLY, KC_VOLD, KC_VOLU, _______}
-},
-[_DL]= { /* DUAL */
-    {_______, _______, KC_WH_U, KC_MS_U, KC_WH_D, _______,     _______,        KC_APP,  KC_INS,  _______, KC_PSCR, _______},
-    {_______, _______, KC_MS_L, KC_MS_D, KC_MS_R, _______,     KC_LEFT,        KC_DOWN, KC_UP,   KC_RGHT, KC_ACL0, KC_ACL2},
-    {_______, _______, KC_BTN2, KC_BTN3, KC_BTN1, KC_WWW_BACK, KC_WWW_FORWARD, KC_MUTE, _______, _______, _______, _______},
-    {_______, _______, KC_LGUI, KC_LALT, _______, _______,     _______,        _______, _______, _______, _______, _______}
-},
-[_DYN]= { /* special */
-    {_______,  DYN_REC_START1, DYN_MACRO_PLAY1, _______, _______, _______, _______, KC_APP,  KC_INS,  _______, KC_PSCR, KC_PAUS},
-    {_______,  DYN_REC_START2, DYN_MACRO_PLAY2, _______, _______, _______, _______, _______, _______, KC_CAPS, KC_SLCK, KC_NLCK},
-    {KM_SHLK,  _______,        _______,         _______, _______, _______, _______, _______, _______, _______, _______, _______},
-    {_______,  _______,        _______,         _______, _______, _______, _______, _______, _______, _______, _______, _______}
-},
-};
-
-#undef _______
-
-const uint16_t PROGMEM fn_actions[] = {
-    ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT),
+    [_QW] = LAYOUT_planck_mit( /* Qwerty */
+        KC_TAB,        KC_Q,     KC_W,    KC_E,    KC_R,  KC_T,   KC_Y,   KC_U,  KC_I,    KC_O,    KC_P,    KC_BSPC,
+        CTL_T(KC_ESC), KC_A,     KC_S,    KC_D,    KC_F,  KC_G,   KC_H,   KC_J,  KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+        KC_LSFT,       KC_Z,     KC_X,    KC_C,    KC_V,  KC_B,   KC_N,   KC_M,  KC_COMM, KC_DOT,  KC_SLSH, MT(MOD_RSFT, KC_ENT),
+        KC_LCTL,       MO(_DYN), KC_LGUI, KC_LALT, KM_LW,     KC_SPC,     KM_RS, KC_RALT, KC_DOWN, KC_UP,   KC_RCTL
+        ),
+    [_CM] = LAYOUT_planck_mit( /* Colemak */
+        KC_TAB,        KC_Q,     KC_W,    KC_F,    KC_P,  KC_G,   KC_J,   KC_L,  KC_U,    KC_Y,    KC_SCLN, KC_BSPC,
+        CTL_T(KC_ESC), KC_A,     KC_R,    KC_S,    KC_T,  KC_D,   KC_H,   KC_N,  KC_E,    KC_I,    KC_O,    KC_QUOT,
+        KC_LSFT,       KC_Z,     KC_X,    KC_C,    KC_V,  KC_B,   KC_K,   KC_M,  KC_COMM, KC_DOT,  KC_SLSH, MT(MOD_RSFT, KC_ENT),
+        KC_LCTL,       MO(_DYN), KC_LGUI, KC_LALT, KM_LW,     KC_SPC,     KM_RS, KC_RALT, KC_DOWN, KC_UP,   KC_RCTL
+        ),
+    [_PP] = LAYOUT_planck_mit( /* Pure Pro */
+        KC_TAB,  KC_Q,     KC_W,    KC_E,    KC_R,  KC_T,   KC_Y,   KC_U,  KC_I,    KC_O,                 KC_P,    KC_BSPC,
+        KC_ESC,  KC_A,     KC_S,    KC_D,    KC_F,  KC_G,   KC_H,   KC_J,  KC_K,    KC_L,                 KC_SCLN, KC_ENT,
+        KC_LSFT, KC_Z,     KC_X,    KC_C,    KC_V,  KC_B,   KC_N,   KC_M,  KC_COMM, MT(MOD_RSFT, KC_DOT), KC_UP,   MT(MOD_RCTL, KC_SLSH),
+        KC_LCTL, MO(_DYN), KC_LGUI, KC_LALT, KM_LW,     KC_SPC,     KM_RS, KC_RALT, KC_LEFT,              KC_DOWN, KC_RGHT
+        ),
+    [_PPG] = LAYOUT_planck_mit( /* Pure Pro: Gaming */
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_RSFT, _______, KC_RCTL,
+        _______, _______, KM_LW,   _______, KM_RS,        _______,     KM_RS  , _______, _______, _______, _______
+        ),
+    [_NM] = LAYOUT_planck_mit( /* Numeric */
+        KC_TAB,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        KC_LSFT, _______, _______, _______, _______, _______, _______, _______, KC_COMM, KC_DOT,  _______, MT(MOD_RSFT, KC_ENT),
+        _______, _______, _______, _______, _______,      KC_SPC,      _______, _______, _______, _______, _______
+        ),
+    [_LW] = LAYOUT_planck_mit( /* LOWER */
+        KC_TILD, KC_EXLM,    KC_AT,      KC_HASH,    KC_DLR,     KC_PERC,    KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
+        KC_ESC,  LGUI(KC_1), LGUI(KC_2), LGUI(KC_3), LGUI(KC_4), LGUI(KC_5), KM_NUM,  KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
+        _______, LGUI(KC_6), LGUI(KC_7), LGUI(KC_8), LGUI(KC_9), LGUI(KC_0), KM_SLP,  KC_HOME, KC_PGDN, KC_PGUP, KC_END,  KC_ENT,
+        _______, BL_TOGG,    _______,    _______,    _______,          KC_BTN1,       _______, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+        ),
+    [_RS] = LAYOUT_planck_mit( /* RAISE */
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,       KC_0,    KC_DEL,
+        KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC,    KC_RBRC, KC_BSLS,
+        _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  DF(_QW), DF(_CM), KM_PP_HOLD, KM_RST,  KC_ENT,
+        _______, BL_STEP, _______, _______, _______,     KC_BTN2,      _______, KC_MPLY, KC_VOLD,    KC_VOLU, _______
+        ),
+    [_DL] = LAYOUT_planck_mit( /* DUAL */
+        _______, _______, KC_WH_U, KC_MS_U, KC_WH_D, _______,     _______,        KC_APP,  KC_INS,  _______, KC_PSCR, _______,
+        _______, _______, KC_MS_L, KC_MS_D, KC_MS_R, _______,     KC_LEFT,        KC_DOWN, KC_UP,   KC_RGHT, KC_ACL0, KC_ACL2,
+        _______, _______, KC_BTN2, KC_BTN3, KC_BTN1, KC_WWW_BACK, KC_WWW_FORWARD, KC_MUTE, _______, _______, _______, _______,
+        _______, _______, KC_LGUI, KC_LALT, _______,           _______,           _______, _______, _______, _______, _______
+        ),
+    [_DYN] = LAYOUT_planck_mit( /* special */
+        KM_HOLD,  DYN_REC_START1, DYN_MACRO_PLAY1, _______, _______,    _______, _______, KC_APP,  KC_INS,  _______, KC_PSCR, KC_PAUS,
+        KC_LOCK,  DYN_REC_START2, DYN_MACRO_PLAY2, _______, _______,    _______, _______, _______, _______, KC_CAPS, KC_SLCK, KC_NLCK,
+        KM_SHLK,  _______,        _______,         _______, _______,    _______, _______, _______, _______, _______, _______, _______,
+        _______,  _______,        _______,         _______, KM_PP_GAME,      DF(_QW),     DF(_PP), _______, _______, _______, _______
+        ),
 };
 
+/* It's a pseudo-layer composed of two real layers, we need a function for this. */
+void enable_gaming_layer(void) {
+    default_layer_set((1UL << _PP) | (1UL << _PPG));
+#ifdef BACKLIGHT_ENABLE
+    backlight_toggle();
+    _delay_ms(100);
+    backlight_toggle();
+#endif
+}
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     static uint16_t key_timer;
+    static uint8_t ignore_up_events = 0;
 
     uint16_t macro_kc = (keycode == MO(_DYN) ? DYN_REC_STOP : keycode);
     if (!process_record_dynamic_macro(macro_kc, record)) {
         return false;
     }
 
+    if (ignore_up_events > 0 && keycode != MO(_DYN) && keycode != KM_HOLD && !record->event.pressed) {
+        ignore_up_events -= 1;
+        return false;
+    }
+
     switch (keycode) {
     case KM_LW:
         if (record->event.pressed) {
@@ -133,7 +135,30 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     case KM_SHLK:
         register_code(KC_LSFT);
         break;
+    case KM_HOLD:
+        if (!record->event.pressed) {
+            ignore_up_events += 1;
+        }
+        break;
     case KM_RST:
+    {
+        /* Make slash available on the PP layer. */
+        if ((1UL << _PP) & default_layer_state) {
+            int32_t old_default_layer_state = default_layer_state;
+            int32_t old_layer_state = layer_state;
+
+            layer_state = 0;
+            default_layer_state = (1UL << _QW);
+
+            process_record(record);
+
+            layer_state = old_layer_state;
+            default_layer_state = old_default_layer_state;
+
+            return false;
+        }
+    }
+
         if (record->event.pressed) {
             key_timer = timer_read();
         } else {
@@ -146,15 +171,17 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
             }
         }
         break;
-    case KM_PPLR:
+    case KM_PP_GAME:
+        if (!record->event.pressed) {
+            enable_gaming_layer();
+        }
+        break;
+    case KM_PP_HOLD:
         if (record->event.pressed) {
             key_timer = timer_read();
         } else {
             if (timer_elapsed(key_timer) >= 250) {
-                default_layer_set((1UL << _PP) | (1UL << _PPG));
-                backlight_toggle();
-                _delay_ms(100);
-                backlight_toggle();
+                enable_gaming_layer();
             } else {
                 default_layer_set(1UL << _PP);
             }

keyboards/planck/keymaps/vifon/rules.mk

@@ -16,6 +16,8 @@ AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+API_SYSEX_ENABLE = no       # https://www.reddit.com/r/olkb/comments/5swhij/_/ddie6zq/
+KEY_LOCK_ENABLE = yes
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

keyboards/tada68/keymaps/cheese/keymap.c

@@ -0,0 +1,107 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+#define _CL 2
+#define _AL 3
+
+enum custom_keycodes {
+    SPX4 = SAFE_RANGE
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    if (record->event.pressed) {
+        switch(keycode) {
+            case SPX4:
+                SEND_STRING("    ");
+                return false;
+        }
+    }
+    return true;
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: (Base Layer) Default Layer
+   * ,----------------------------------------------------------------.
+   * |Esc | 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |~ ` |
+   * |----------------------------------------------------------------|
+   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |PgUp|
+   * |----------------------------------------------------------------|
+   * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |PgDn|
+   * |----------------------------------------------------------------|
+   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift | Up|Del |
+   * |----------------------------------------------------------------|
+   * |Ctrl|Win |Win |        Space          |Win| FN|Ctrl|Lef|Dow|Rig |
+   * `----------------------------------------------------------------'
+   */
+[_BL] = LAYOUT_ansi(
+  KC_ESC, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS, KC_EQL,  KC_BSPC,    KC_BSPC, \
+  KC_TAB,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC, KC_RBRC,KC_BSLS,    KC_PGUP, \
+  MO(_CL),  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,  KC_ENT,           KC_PGDN,  \
+  KC_LSFT,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,   KC_RSFT,        KC_UP,  KC_DEL, \
+  KC_LCTL, KC_LALT,LM(_AL,0x08),                KC_SPC,                       LM(_AL,0x18),MO(_FL),KC_RCTRL, KC_LEFT,KC_DOWN,KC_RGHT),
+
+  /* Keymap _FL: Function Layer
+   * ,----------------------------------------------------------------.
+   * |   | F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Del    |` ~ |
+   * |----------------------------------------------------------------|
+   * |     |   |Up |   |   |   |   |   |   |   |   |   |   |     |Hme |
+   * |----------------------------------------------------------------|
+   * |      |<- |Dn | ->|   |   |   |   |   |   |   |   |        |End |
+   * |----------------------------------------------------------------|
+   * |        |   |   |Bl-|BL |BL+|   |MUT|VU-|VU+|   |      |   |    |
+   * |----------------------------------------------------------------|
+   * |    |    |    |                       |   |   |    |   |   |    |
+   * `----------------------------------------------------------------'
+   */
+[_FL] = LAYOUT_ansi(
+  _______, KC_F1 ,KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_GRV,  \
+  SPX4,_______, KC_UP,_______,_______, _______,_______,_______,_______,_______,_______,_______,_______, _______,KC_HOME, \
+  _______,KC_LEFT,KC_DOWN,KC_RIGHT,_______,_______,_______,_______,_______,_______,_______,_______,        _______,KC_END, \
+  _______,_______,_______,BL_DEC, BL_TOGG,BL_INC, _______,KC_MUTE,KC_VOLD,KC_VOLU,_______,_______, _______, _______, \
+  _______,_______,_______,                 _______,               _______,_______,_______,_______,_______, _______),
+
+  /* Keymap _CL: Caps Layer
+   * ,----------------------------------------------------------------.
+   * |   | F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Del    |` ~ |
+   * |----------------------------------------------------------------|
+   * |     |   |Up |   |   |   |   |   |   |   |   |   |   |     |Hme |
+   * |----------------------------------------------------------------|
+   * |      |<- |Dn | ->|   |   |   |   |   |   |   |   |        |End |
+   * |----------------------------------------------------------------|
+   * |        |   |   |Bl-|BL |BL+|   |MUT|VU-|VU+|   |   McL|MsU|McR |
+   * |----------------------------------------------------------------|
+   * |    |    |    |                       |   |   |    |MsL|MsD|MsR |
+   * `----------------------------------------------------------------'
+   */
+[_CL] = LAYOUT_ansi(
+  _______, KC_F1 ,KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_GRV ,  \
+  _______,_______, KC_UP,_______,_______, _______,_______,_______,_______,_______,_______,_______,_______, _______,KC_HOME, \
+  _______,KC_LEFT,KC_DOWN,KC_RIGHT,_______,_______,_______,_______,_______,_______,_______,_______,        _______,KC_END, \
+  _______,_______,_______,BL_DEC, BL_TOGG,BL_INC, _______,KC_MUTE,KC_VOLD,KC_VOLU,_______,KC_BTN1, KC_MS_U, KC_BTN2, \
+  _______,_______,_______,                 _______,               _______,_______,_______,KC_MS_L,KC_MS_D, KC_MS_R),
+
+  /* Keymap _AL: ALT Layer
+   * ,----------------------------------------------------------------.
+   * |` ~|   |   |   |   |   |   |   |   |   |   |   |   |       | ` ~|
+   * |----------------------------------------------------------------|
+   * |     |   |   |   |   |   |   |   |   |   |   |   |   |     |    |
+   * |----------------------------------------------------------------|
+   * |      |   |   |   |   |   |   |   |   |   |   |   |        |    |
+   * |----------------------------------------------------------------|
+   * |        |   |   |   |   |   |   |   |   |   |   |      |   |    |
+   * |----------------------------------------------------------------|
+   * |    |    |    |                       |   |   |    |   |   |    |
+   * `----------------------------------------------------------------'
+   */
+[_AL] = LAYOUT_ansi(
+  KC_GRV, _______ ,_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_GRV , \
+  _______,_______, _______, _______,_______, _______,_______,_______,_______,_______,_______,_______,_______, _______,_______, \
+  _______,_______, _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,        _______,_______, \
+  _______,_______,_______, _______, _______, _______, _______, _______, _______, _______,_______, _______, _______,  _______, \
+  _______,_______,_______,                 _______,               _______,_______,_______, _______, _______,  _______),
+};

keyboards/tada68/keymaps/cheese/readme.md

@@ -0,0 +1,20 @@
+# pgillan's Cheese TADA68 layout
+
+A collection of tweaks to make the keyboard more mac friendly and increase personal usability,
+based on the default keymap.
+
+* Turned the caps-lock into an additional function key so I didn't have to try to hit the
+  the keys on the right with one hand.
+* Moved the arrow/mouse controls to the caps-lock layer from the function layer.
+* Swapped the Windows key and Alt keys, I didn't have to do it in OS X.
+* Made the escape key work as a backtick when "Alt" is depressed, so I can 1) reverse
+  direction when I Alt-Tab through current applications, and Alt-Backtick through 
+  open windows.
+* Turned the backtick/tilde key into another backspace key, so I can just go all the way
+  up to the corner without overshooting.
+* Adjusted the volume controles so M is "mute", the "," ( or "<") is "down", and "." (or ">") 
+  is "up".  It just makes a ton more sense, I have no idea why it would have been done any
+  differently.
+* Moved PageUp/PageDown up above the delete key, and made the Home and End on the capslock
+  and function layers.
+* Made the tab key on the function layer output 4 spaces instead of a tab character.

keyboards/tada68/keymaps/cheese/rules.mk

@@ -0,0 +1,18 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+

keyboards/thevankeyboards/roadkit/keymaps/wavebeem-gamepad/keymap.c

@@ -0,0 +1,10 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_ortho_4x4(
+    KC_TAB,  KC_Q,    KC_W,    KC_E,
+    KC_ESC,  KC_A,    KC_S,    KC_D,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,
+    KC_F,    KC_LALT, KC_LCTL, KC_SPC
+  ),
+};

keyboards/thevankeyboards/roadkit/keymaps/wavebeem-gamepad/readme.md

@@ -0,0 +1,35 @@
+![Keymap Diagram](https://i.imgur.com/hRjbhEn.png)
+
+# Gamepad Layout by @wavebeem
+
+The concept behind this layout is the left side of a computer keyboard,
+optimized with essential keys for playing FPS games. It was designed for TheVan
+RoadKit, but it should work for any 4x4 ortholinear keyboard.
+
+I play with my pinky on `Shift`, thumb on `Space`, and the rest of my fingers on
+`W A S D`. I use my thumb for `Control`, `X`, and sometimes `C`. I usually use
+`Z` with my ring finger. It also helps to angle my fingers more perpendicular to
+the board in order to allow my thumb to more easily access the `Z X C` row.
+
+The number keys `1 2 3` are missing for weapon switching, but you can usually
+switch with the mouse wheel or rebind those to `Z X C` or something else.
+
+The key `R` for reloading is missing, but I prefer to use my extra mouse buttons
+for that.
+
+I don't really use `Alt` for games, but I kept it around for `Alt-Tab` in
+Windows.
+
+# Keymap Text Diagram
+
+```
++-------+-------+-------+-------+
+| Tab   | Q     | W     | E     |
++-------+-------+-------+-------+
+| Esc   | A     | S     | D     |
++-------+-------+-------+-------+
+| Shift | Z     | X     | C     |
++-------+-------+-------+-------+
+| F     | Alt   | Ctrl  | Space |
++-------+-------+-------+-------+
+```

keyboards/thevankeyboards/roadkit/keymaps/wavebeem-gamepad/rules.mk

@@ -0,0 +1,17 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend

quantum/process_keycode/process_auto_shift.c

@@ -173,6 +173,8 @@ bool process_auto_shift(uint16_t keycode, keyrecord_t *record) {
       case KC_DOT:
       case KC_SLSH:
       case KC_GRAVE:
+      case KC_NONUS_BSLASH:
+      case KC_NONUS_HASH:
 #endif
 
         autoshift_flush();

quantum/rgblight.h

@@ -18,6 +18,52 @@
 
 #include "rgblight_reconfig.h"
 
+/***** rgblight_mode(mode)/rgblight_mode_noeeprom(mode) ****
+
+ old mode number (before 0.6.117) to new mode name table
+
+|-----------------|-----------------------------------|
+| old mode number | new mode name                     |
+|-----------------|-----------------------------------|
+|        1        | RGBLIGHT_MODE_STATIC_LIGHT        |
+|        2        | RGBLIGHT_MODE_BREATHING           |
+|        3        | RGBLIGHT_MODE_BREATHING + 1       |
+|        4        | RGBLIGHT_MODE_BREATHING + 2       |
+|        5        | RGBLIGHT_MODE_BREATHING + 3       |
+|        6        | RGBLIGHT_MODE_RAINBOW_MOOD        |
+|        7        | RGBLIGHT_MODE_RAINBOW_MOOD + 1    |
+|        8        | RGBLIGHT_MODE_RAINBOW_MOOD + 2    |
+|        9        | RGBLIGHT_MODE_RAINBOW_SWIRL       |
+|       10        | RGBLIGHT_MODE_RAINBOW_SWIRL + 1   |
+|       11        | RGBLIGHT_MODE_RAINBOW_SWIRL + 2   |
+|       12        | RGBLIGHT_MODE_RAINBOW_SWIRL + 3   |
+|       13        | RGBLIGHT_MODE_RAINBOW_SWIRL + 4   |
+|       14        | RGBLIGHT_MODE_RAINBOW_SWIRL + 5   |
+|       15        | RGBLIGHT_MODE_SNAKE               |
+|       16        | RGBLIGHT_MODE_SNAKE + 1           |
+|       17        | RGBLIGHT_MODE_SNAKE + 2           |
+|       18        | RGBLIGHT_MODE_SNAKE + 3           |
+|       19        | RGBLIGHT_MODE_SNAKE + 4           |
+|       20        | RGBLIGHT_MODE_SNAKE + 5           |
+|       21        | RGBLIGHT_MODE_KNIGHT              |
+|       22        | RGBLIGHT_MODE_KNIGHT + 1          |
+|       23        | RGBLIGHT_MODE_KNIGHT + 2          |
+|       24        | RGBLIGHT_MODE_CHRISTMAS           |
+|       25        | RGBLIGHT_MODE_STATIC_GRADIENT     |
+|       26        | RGBLIGHT_MODE_STATIC_GRADIENT + 1 |
+|       27        | RGBLIGHT_MODE_STATIC_GRADIENT + 2 |
+|       28        | RGBLIGHT_MODE_STATIC_GRADIENT + 3 |
+|       29        | RGBLIGHT_MODE_STATIC_GRADIENT + 4 |
+|       30        | RGBLIGHT_MODE_STATIC_GRADIENT + 5 |
+|       31        | RGBLIGHT_MODE_STATIC_GRADIENT + 6 |
+|       32        | RGBLIGHT_MODE_STATIC_GRADIENT + 7 |
+|       33        | RGBLIGHT_MODE_STATIC_GRADIENT + 8 |
+|       34        | RGBLIGHT_MODE_STATIC_GRADIENT + 9 |
+|       35        | RGBLIGHT_MODE_RGB_TEST            |
+|       36        | RGBLIGHT_MODE_ALTERNATING         |
+|-----------------|-----------------------------------|
+ *****/
+
 #define _RGBM_SINGLE_STATIC(sym)   RGBLIGHT_MODE_ ## sym,
 #define _RGBM_SINGLE_DYNAMIC(sym)  RGBLIGHT_MODE_ ## sym,
 #define _RGBM_MULTI_STATIC(sym)    RGBLIGHT_MODE_ ## sym,
@@ -238,6 +284,10 @@ void rgblight_effect_alternating(void);
   #ifdef RGBLIGHT_EFFECT_ALTERNATING
     _RGBM_SINGLE_DYNAMIC( ALTERNATING )
   #endif
+  ////  Add a new mode here.
+  // #ifdef RGBLIGHT_EFFECT_<name>
+  //    _RGBM_<SINGLE|MULTI>_<STATIC|DYNAMIC>( <name> )
+  // #endif
 #endif
 
 #undef _RGBM_SINGLE_STATIC

tmk_core/common.mk

@@ -43,6 +43,7 @@ endif
 endif
 
 ifeq ($(PLATFORM),ARM_ATSAM)
+	TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/printf.c
 	TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/eeprom.c
 endif
 

tmk_core/common/arm_atsam/printf.c

@@ -0,0 +1,66 @@
+/*
+Copyright 2018 Massdrop Inc.
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef CONSOLE_PRINT
+
+#include "samd51j18a.h"
+#include "arm_atsam_protocol.h"
+#include "printf.h"
+#include <string.h>
+#include <stdarg.h>
+
+void console_printf(char *fmt, ...) {
+    while (udi_hid_con_b_report_trans_ongoing) {}           //Wait for any previous transfers to complete
+
+    static char console_printbuf[CONSOLE_PRINTBUF_SIZE];    //Print and send buffer
+    va_list va;
+    int result;
+
+    va_start(va, fmt);
+    result = vsnprintf(console_printbuf, CONSOLE_PRINTBUF_SIZE, fmt, va);
+    va_end(va);
+
+    uint32_t irqflags;
+    char *pconbuf = console_printbuf;                       //Pointer to start send from
+    int send_out = CONSOLE_EPSIZE;                          //Bytes to send per transfer
+
+    while (result > 0) {                                    //While not error and bytes remain
+        while (udi_hid_con_b_report_trans_ongoing) {}       //Wait for any previous transfers to complete
+
+        irqflags = __get_PRIMASK();
+        __disable_irq();
+        __DMB();
+
+        if (result < CONSOLE_EPSIZE) {                      //If remaining bytes are less than console epsize
+            memset(udi_hid_con_report, 0, CONSOLE_EPSIZE);  //Clear the buffer
+            send_out = result;                              //Send remaining size
+        }
+
+        memcpy(udi_hid_con_report, pconbuf, send_out);      //Copy data into the send buffer
+
+        udi_hid_con_b_report_valid = 1;                     //Set report valid
+        udi_hid_con_send_report();                          //Send report
+
+        __DMB();
+        __set_PRIMASK(irqflags);
+
+        result -= send_out;                                 //Decrement result by bytes sent
+        pconbuf += send_out;                                //Increment buffer point by bytes sent
+    }
+}
+
+#endif //CONSOLE_PRINT

tmk_core/common/arm_atsam/printf.h

@@ -1,8 +1,11 @@
 #ifndef _PRINTF_H_
 #define _PRINTF_H_
 
-int dpf(const char *_Format, ...);
-#define __xprintf dpf
+#define CONSOLE_PRINTBUF_SIZE 512
+
+void console_printf(char *fmt, ...);
+
+#define __xprintf console_printf
 
 #endif //_PRINTF_H_
 

tmk_core/protocol/arm_atsam/main_arm_atsam.c

@@ -276,9 +276,9 @@ int main(void)
 
     host_set_driver(&arm_atsam_driver);
 
-#ifdef VIRTSER_ENABLE
+#ifdef CONSOLE_ENABLE
     uint64_t next_print = 0;
-#endif //VIRTSER_ENABLE
+#endif //CONSOLE_ENABLE
 
     v_5v_avg = adc_get(ADC_5V);
 
@@ -290,15 +290,17 @@ int main(void)
 
         main_subtasks(); //Note these tasks will also be run while waiting for USB keyboard polling intervals
 
-#ifdef VIRTSER_ENABLE
+#ifdef CONSOLE_ENABLE
         if (CLK_get_ms() > next_print)
         {
             next_print = CLK_get_ms() + 250;
-            dprintf("5v=%u 5vu=%u dlow=%u dhi=%u gca=%u gcd=%u\r\n",v_5v,v_5v_avg,v_5v_avg-V5_LOW,v_5v_avg-V5_HIGH,gcr_actual,gcr_desired);
+            //Add any debug information here that you want to see very often
+            //dprintf("5v=%u 5vu=%u dlow=%u dhi=%u gca=%u gcd=%u\r\n", v_5v, v_5v_avg, v_5v_avg - V5_LOW, v_5v_avg - V5_HIGH, gcr_actual, gcr_desired);
         }
-#endif //VIRTSER_ENABLE
+#endif //CONSOLE_ENABLE
     }
 
+
     return 1;
 }
 

tmk_core/protocol/arm_atsam/usb/conf_usb.h

@@ -134,6 +134,11 @@
 #define  UDI_HID_EXK_DISABLE_EXT()      main_exk_disable()
 #endif
 
+#ifdef CON
+#define  UDI_HID_CON_ENABLE_EXT()       main_con_enable()
+#define  UDI_HID_CON_DISABLE_EXT()      main_con_disable()
+#endif
+
 #ifdef MOU
 #define  UDI_HID_MOU_ENABLE_EXT()       main_mou_enable()
 #define  UDI_HID_MOU_DISABLE_EXT()      main_mou_disable()