updated xd75 layout (#2321)

* plank layout

* ergodone

* x75

* readmes

* added rgb controls

* bslash

* added backlighting based on layer/modifier

* changed colors

keyboards/atom47/atom47.c

@@ -0,0 +1,31 @@
+#include "atom47.h"
+#include "led.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	led_init_ports();
+};
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	matrix_scan_user();
+};
+
+void led_init_ports(void) {
+    // * Set our LED pins as output
+    DDRB &= ~(1<<5);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+        PORTF |= (1<<5);
+    } else {
+        // Turn capslock off
+        PORTF &= ~(1<<5);
+    }
+	led_set_user(usb_led);
+}

keyboards/atom47/atom47.h

@@ -0,0 +1,25 @@
+#ifndef ATOM47_H
+#define ATOM47_H
+
+#include "quantum.h"
+
+// readability
+#define XXX KC_NO
+
+#define KEYMAP_ANSI( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a,      k1c, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a,      k2c, \
+	k30, k31, k32, k33, k34,      k36,      k38, k39, k3a,      k3c \
+) \
+{ \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \
+	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \
+	{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, XXX, k2c}, \
+	{k30, k31, k32, k33, k34, XXX, k36, XXX, k38, k39, k3a, XXX, k3c}  \
+}
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
+
+#endif

keyboards/atom47/config.h

@@ -0,0 +1,73 @@
+/*
+Copyright 2012 Maarten Dekkers <atomkeeb@gmail.com
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0003
+#define MANUFACTURER    Vortex
+#define PRODUCT         Core
+#define DESCRIPTION     Atom47 PCB for the Vortex Core
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 13
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS {B1,B2,B3,B7}
+#define MATRIX_COL_PINS {D7,D5,F0,F1,F4,F6,F7,D4,C7,C6,D6,B5,B4}
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B6
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 4
+
+#endif
+
+#define RGB_DI_PIN D0    // The pin the LED strip is connected to
+#define RGBLED_NUM 1     // Number of LEDs in your strip
+
+#define QMK_ESC_OUTPUT D7 // usually COL
+#define QMK_ESC_INPUT B1 // usually ROW
+#define QMK_LED B6

keyboards/atom47/keymaps/LEdiodes/atom47.c

@@ -0,0 +1,31 @@
+#include "atom47.h"
+#include "led.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	led_init_ports();
+};
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	matrix_scan_user();
+};
+
+void led_init_ports(void) {
+    // * Set our LED pins as output
+    DDRB &= ~(1<<5);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+        PORTF |= (1<<5);
+    } else {
+        // Turn capslock off
+        PORTF &= ~(1<<5);
+    }
+	led_set_user(usb_led);
+}

keyboards/atom47/keymaps/LEdiodes/atom47.h

@@ -0,0 +1,25 @@
+#ifndef ATOM47_H
+#define ATOM47_H
+
+#include "quantum.h"
+
+// readability
+#define XXX KC_NO
+
+#define KEYMAP_ANSI( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a,      k1c, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a,      k2c, \
+	k30, k31, k32, k33, k34,      k36,      k38, k39, k3a,      k3c \
+) \
+{ \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \
+	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \
+	{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, XXX, k2c}, \
+	{k30, k31, k32, k33, k34, XXX, k36, XXX, k38, k39, k3a, XXX, k3c}  \
+}
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
+
+#endif

keyboards/atom47/keymaps/LEdiodes/config.h

@@ -0,0 +1,73 @@
+/*
+Copyright 2012 Maarten Dekkers <atomkeeb@gmail.com
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0003
+#define MANUFACTURER    Vortex
+#define PRODUCT         Core
+#define DESCRIPTION     Atom47 PCB for the Vortex Core
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 13
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS {B1,B2,B3,B7}
+#define MATRIX_COL_PINS {D7,D5,F0,F1,F4,F6,F7,D4,C7,C6,D6,B5,B4}
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B6
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 4
+
+#endif
+
+#define RGB_DI_PIN D0    // The pin the LED strip is connected to
+#define RGBLED_NUM 1     // Number of LEDs in your strip
+
+#define QMK_ESC_OUTPUT D7 // usually COL
+#define QMK_ESC_INPUT B1 // usually ROW
+#define QMK_LED B6

keyboards/atom47/keymaps/LEdiodes/keymap.c

@@ -0,0 +1,35 @@
+#include QMK_KEYBOARD_H
+
+// These are all aliases for the  function layers.
+#define _L0 0
+#define _L1 1
+#define _L2 2
+#define _L3 3
+
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_L0] = KEYMAP_ANSI(
+  KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,	\
+  KC_TAB,		KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,				KC_ENT,  	\
+  KC_LSFT,		KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_RSFT,				MO(_L1),	\
+  KC_LCTL,		KC_LGUI,	KC_LALT,	TG(_L3),	KC_SPC, 				KC_SPC,					MO(_L2),	KC_RALT,	KC_APP,					KC_RCTRL),	\
+ 
+[_L2] = KEYMAP_ANSI(
+  _______,		KC_VOLD,	KC_VOLU,	KC_MUTE,	RESET,		_______,	KC_CALC,	KC_PGUP,	KC_UP,		KC_PGDN,	KC_PSCR,	KC_SLCK,	KC_PAUS,	\
+  KC_CAPS,		KC_MPRV,	KC_MPLY,	KC_MNXT,	_______,	_______,	KC_HOME,	KC_LEFT,	KC_DOWN,	KC_RIGHT,	KC_INS,					_______,	\
+  _______,		_______,	_______,	_______,	_______,	_______,	_______,	BL_TOGG,	BL_DEC,		BL_INC,		_______,				_______,	\
+  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				_______),	\
+ 
+[_L1] = KEYMAP_ANSI(
+  KC_GRV,		KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		\
+  KC_1,			KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		KC_MINS,				KC_EQL,		\
+  _______,		_______,	_______,	_______,	_______,	KC_QUOT,	KC_SLSH,	KC_LBRC,	KC_RBRC,	KC_BSLS,	KC_RSFT,				_______,	\
+  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				_______),	\
+ 
+[_L3] = KEYMAP_ANSI(
+  _______,		_______,	_______,	   KC_7,	   KC_8,	   KC_9,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	\
+  _______,		_______,	_______,	   KC_4,	   KC_5,	   KC_6,	_______,	_______,	_______,	_______,	_______,				_______,	\
+  _______,		_______,	_______,	   KC_1,	   KC_2,	   KC_3,	_______,	_______,	_______,	_______,	_______,				_______,	\
+  _______,		_______,	_______,	   _______,    KC_0,	  KC_DOT, 	        	            _______,	_______,	_______,				RESET),     \
+};

keyboards/atom47/keymaps/LEdiodes/rules.mk

@@ -0,0 +1,65 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = no   # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE = no 		# MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = no 		# Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID

keyboards/atom47/keymaps/default/keymap.c

@@ -0,0 +1,39 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+#define _MA 0 //Main layer
+#define _FN 1 //Fn
+#define _FN1 2 //Fn1
+#define _PN 3 //Pn
+
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_MA] = KEYMAP_ANSI(
+  KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,	\
+  KC_TAB,		KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,				KC_ENT,  	\
+  KC_LSFT,		KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_RSFT,				MO(_FN1),	\
+  KC_LCTL,		KC_LGUI,	KC_LALT,	MO(_PN),	KC_SPC, 				KC_SPC,					MO(_FN),	KC_RALT,	KC_APP,					KC_RCTRL),	\
+ 
+[_FN] = KEYMAP_ANSI(
+  _______,		KC_VOLD,	KC_VOLU,	KC_MUTE,	RESET,		_______,	KC_CALC,	KC_PGUP,	KC_UP,		KC_PGDN,	KC_PSCR,	KC_SLCK,	KC_PAUS,	\
+  KC_CAPS,		KC_MPRV,	KC_MPLY,	KC_MNXT,	_______,	_______,	KC_HOME,	KC_LEFT,	KC_DOWN,	KC_RIGHT,	KC_INS,					_______,	\
+  _______,		_______,	_______,	_______,	_______,	_______,	_______,	BL_TOGG,	BL_DEC,		BL_INC,		_______,				_______,	\
+  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				_______),	\
+ 
+[_FN1] = KEYMAP_ANSI(
+  KC_GRV,		KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		\
+  KC_1,			KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		KC_MINS,				KC_EQL,		\
+  _______,		_______,	_______,	_______,	_______,	KC_QUOT,	KC_SLSH,	KC_LBRC,	KC_RBRC,	KC_BSLS,	KC_RSFT,				_______,	\
+  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				_______),	\
+ 
+[_PN] = KEYMAP_ANSI(
+  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	\
+  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,	\
+  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,	\
+  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				RESET),
+};

keyboards/atom47/keymaps/default/readme.md

@@ -0,0 +1,10 @@
+To be updated...
+
+
+// This layer is just a blank template to be copied for easy layer creation. please don not edit it.
+
+ [_LX] = KEYMAP_ANSI(
+   _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	\
+   _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,	\
+   _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,	\
+   _______,		_______,	_______,	_______,	    _______, 			_______,			               	_______,	_______,	_______,	RESET),

keyboards/atom47/readme.md

@@ -0,0 +1,28 @@
+# ATOM47
+
+![ATOM47](https://i.imgur.com/rjrFTKT.png)
+
+## Support
+Keyboard Maintainer: [Matthew Kerfoot(https://github.com/mkerfoot)  
+Hardware Supported: ATOM47  
+Hardware Availability: [GeekHack.com Group Buy](https://geekhack.org/index.php?topic=93447.msg2545221)  
+
+
+## Features
+QMK Firmware
+6 Underglow RGB leds
+In-switch leds
+Through-hole micro usb connector (less likely to break off!)
+South facing leds for the QMX/Zealencio users
+Multiple layouts
+Easily reachable reset button under the spacebar
+CapsLock indicator
+
+## Build
+To build the default keymap, simply run `make atom47:default`.
+
+For an alternative, heavily modified layout you would just need to run `make atom47:LEdiodes`.
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+![ATOM47](https://i.imgur.com/WebeUOF.png)

keyboards/atom47/rules.mk

@@ -0,0 +1,65 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = no   # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE = no 		# MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = no 		# Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID

keyboards/dz60/keymaps/Ansi_plus_fn_arrows/keymap.c

@@ -0,0 +1,61 @@
+#include "dz60.h"
+
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	KEYMAP(
+		F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, 
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, 
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, 
+		KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_NO, 
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_RALT, KC_RALT, KC_LGUI, KC_RCTL),
+
+	KEYMAP(
+		KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, 
+		KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_TOGG, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_LEFT, KC_DOWN, KC_RIGHT),
+
+	KEYMAP(
+		KC_TRNS, M(1), M(2), M(3), M(4), M(5), M(6), M(7), M(8), M(9), M(10), M(11), M(12), KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+};
+
+enum function_id {
+    SHIFT_ESC,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(SHIFT_ESC),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t shift_esc_shift_mask;
+  switch (id) {
+    case SHIFT_ESC:
+      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+      if (record->event.pressed) {
+        if (shift_esc_shift_mask) {
+          add_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          add_key(KC_ESC);
+          send_keyboard_report();
+        }
+      } else {
+        if (shift_esc_shift_mask) {
+          del_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          del_key(KC_ESC);
+          send_keyboard_report();
+        }
+      }
+      break;
+  }
+}

keyboards/dz60/keymaps/LEdiodes/config.h

@@ -0,0 +1,58 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x2260
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    KBDFans
+#define PRODUCT         DZ60
+#define DESCRIPTION     DZ60 Keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3, F4 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B6
+#define BACKLIGHT_LEVELS 5
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+#define RGB_DI_PIN E2
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 16
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+
+/* sets 'Auto Shift' timeouts */
+#define AUTO_SHIFT_TIMEOUT 150
+#define NO_AUTO_SHIFT_SPECIAL
+
+#endif

keyboards/dz60/keymaps/LEdiodes/keymap.c

@@ -0,0 +1,141 @@
+#include "xd60.h"
+#include "action_layer.h"
+
+#Define _L0 0
+#Define _L1 1
+#Define _L2 2
+#Define _L3 3
+#Define _L4 4
+
+#define _______ KC_TRNS
+
+/*
+ * template
+ * [_L1] = KEYMAP( 
+ *      _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,    \
+ *      _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______,        \
+ *       _______,        _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______,        \
+ *      _______,        _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,   \
+ *       _______,_______,_______,        _______,_______,_______,                _______,_______,_______,_______,_______,
+ * 
+ * 
+ *\
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap _L0: (Layer 0 - Base Layer) This is the default layer
+ * This layer has a key set to MO(_L1) which means when held down Layer 1 will become active, If Layer 1 does not have anything set for tat key is will revert to uing the key set at layer 0.
+ * LT(_L1, KC_1) means that when the "1" key is long touched then it will activate the layer _L1 key(F1) but if the key is just tapped it will activate the "1" key.
+ * KC_GESC = Escape when tapped, ` when pressed with Shift or GUI
+ * KC_LSPO = Left Shift when held, ( when tapped
+ * TD(LT(_L3,KC_SPACE)) = This is a test... hoping it will tap dance if double tapped it does enter if single tap it does space if long hold down it does _L3(Layer 3).
+ * LT(_L3,KC_SPACE) = if tapped it does space, is long touch it does _L3(Layer 3)
+ * BL_TOGG = Toggles the LEDs.
+ * ,-----------------------------------------------------------------------------------------.
+ * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |Bkspc| Del |
+ * |-----------------------------------------------------------------------------------------+
+ * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |    \   |
+ * |-----------------------------------------------------------------------------------------+
+ * | _L4    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+ * |-----------------------------------------------------------------------------------------+
+ * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  | RSh |  U  | _L1 |
+ * |-----------------------------------------------------------------------------------------+
+ * | Ctrl |  Win  |  Alt  |  _L3[Space]  |LEdiodes|      Space       |Win | _L2|  L |  D |  R |
+ * `-----------------------------------------------------------------------------------------'
+ */
+[_L0] = KEYMAP(
+      KC_GESC,              LT(_L1, KC_1),LT(_L1, KC_2),LT(_L1, KC_3),LT(_L1, KC_4),LT(_L1, KC_5),LT(_L1, KC_6),LT(_L1, KC_7),LT(_L1, KC_8),LT(_L1, KC_9),LT(_L1, KC_0),LT(_L1, KC_MINS),LT(_L1, KC_EQL),KC_BSPC,  KC_DEL,    \
+      KC_TAB,              KC_Q,    KC_W,    KC_E,     KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC,           KC_BSLS,   \
+      KC_CAPS,             KC_A,    KC_S,    KC_D,     KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_NO,             KC_ENT,    \
+      KC_LSPO, KC_NO,   KC_Z,    KC_X,     KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,  KC_RSPO, KC_UP,    M0(_L1), \
+      KC_LCTL,             KC_LGUI, KC_LALT, TD(LT(_L3,KC_SPACE)),BL_TOGG,TD(TD_SPC_ENT),     KC_RGUI, M0(_L2), KC_LEFT,  KC_DOWN,  KC_RIGHT),
+
+/* Keymap _L1: (Layer 1) This is function layer 1
+ * This layer is activated while the Fn key is being held down.
+ * ,-----------------------------------------------------------------------------------------.
+ * | Reset |  F1 |  F2 |  F3 |  F4 |  F5 |  F6 |  F7 |  F8 |  F9 | F10 | F11 | F12 | F13| F14|
+ * |-----------------------------------------------------------------------------------------+
+ * |        |  WhUp|  U  | WhDn |    |    |     |     |     | PrtScr |     |    |    |       |
+ * |-----------------------------------------------------------------------------------------+
+ * |         |  L   |   D  |  R  |     |     | Home |     |     |     |     |      |         |
+ * |-----------------------------------------------------------------------------------------+
+ * |           |      |     |     |     |     |  End | VolDn|VolUp|Mute |    |   | PgUp|     |
+ * |-----------------------------------------------------------------------------------------+
+ * |      |       |      |          |       |                |      |      | Home| PgDn| End |
+ * `-----------------------------------------------------------------------------------------'
+ */
+[_L1] = KEYMAP( 
+      RESET,   KC_F1,   KC_F2,   KC_F3,    KC_F4,   KC_F5,  KC_F6,    KC_F7,    KC_F8,    KC_F9,     KC_F10,   KC_F11,   KC_F12,  KC_F13,   KC_F14,              \
+      _______, KC_WH_U, KC_UP,   KC_WH_D,  _______, _______,_______,  _______,  _______,  _______,   KC_PSCR, _______,  _______,                      _______,   \
+      _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, KC_HOME, _______,  _______,  _______,   KC_HOME, _______,  _______,                      _______,   \
+      _______,          _______, _______,  KC_APP,  BL_STEP,_______,  KC_END,   KC_VOLD,  KC_VOLU,   KC_MUTE, _______,  _______,  _______, KC_PGUP,   _______,   \
+      _______, _______, _______,                                _______,_______,_______,                _______, _______,         KC_HOME, KC_PGDOWN, KC_END),
+
+/* Keymap _L2: (Layer 2) This is function layer 2
+ * This layer is activated while the Fn2 key is being held down.
+ * LCA(KC_TAB) = Hold Left Control and Alt and press kc_tab which cycles trough open apps.
+ * MEH(KC_TAB) = Hold Left Control, Shift and Alt and press kc_TAB to cycle backwards through apps.
+ * ,-----------------------------------------------------------------------------------------.
+ * |  |   |   |   |   |   |   |   |   |   |  |  |  | | LCA(KC_TAB)|
+ * |-----------------------------------------------------------------------------------------+
+ * |        |  |    |  |    |    |     |     |     |  |     |    |    |       |MEH(KC_TAB)
+ * |-----------------------------------------------------------------------------------------+
+ * |         |     |     |    |     |     | |     |     |     |     |      |         |
+ * |-----------------------------------------------------------------------------------------+
+ * |           |      |     |     |     |     |   | || |    |   | |     |
+ * |-----------------------------------------------------------------------------------------+
+ * |      |       |      |          |       |                |      |      | | |  |
+ * `-----------------------------------------------------------------------------------------'
+ */
+[_L2] = KEYMAP( 
+      _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,LCA(KC_TAB),    \
+      _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        MEH(KC_TAB),        \
+      _______,        _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______,        \
+      _______,        _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,KC_MS_BTN1,KC_MS_UP,KC_MS_BTN2,   \
+      _______,_______,_______,        _______,_______,_______,                _______,_______,KC_MS_LEFT,KC_MS_DOWN,KC_MS_RIGHT,
+
+};
+
+// Custom Actions
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_LAYER_MOMENTARY(1),  // to Fn overlay
+};
+
+// Macros
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+
+  // MACRODOWN only works in this function
+  switch(id) {
+    case 0:
+      if (record->event.pressed) { register_code(KC_RSFT); }
+      else { unregister_code(KC_RSFT); }
+      break;
+  }
+
+  return MACRO_NONE;
+};
+
+// Loop
+void matrix_scan_user(void) {
+  // Empty
+};
+
+//Tap Dance Declarations
+enum {
+  TD_SPC_ENT = 0,
+  TD_KC_LSFT_CAPS = 0,
+  TD_KC_RSFT_CAPS = 0
+};
+
+//Tap Dance Definitions
+qk_tap_dance_action_t tap_dance_actions[] = {
+
+  //Tap once for space, tap twice for enter
+  [TD_SPC_ENT]  = ACTION_TAP_DANCE_DOUBLE(KC_SPC, KC_ENT),
+  //Tap once for Left Shift, twice for Caps Lock
+  [TD_KC_LSFT_CAPS]  = ACTION_TAP_DANCE_DOUBLE(KC_LSFT, KC_CAPS),
+  //Tap once for Right Shift, twice for Caps Lock
+  [TD_KC_RSFT_CAPS]  = ACTION_TAP_DANCE_DOUBLE(KC_RSFT, KC_CAPS)
+   
+// Other declarations would go here, separated by commas, if you have them
+    
+};

keyboards/dz60/keymaps/LEdiodes/readme.md

@@ -0,0 +1,9 @@
+# LEdiodes Keymap for XD60 60% PCB
+
+![LEdiodes Layer 0 Keymap for XD60](https://i.imgur.com/pDneawX.jpg)
+
+## Additional Notes
+Layer 0(default) Keymap for LEdiodes XD60.
+
+## Build
+To build the default keymap, simply run `make xd60:LEdiodes`.

keyboards/dz60/keymaps/LEdiodes/rules.mk

@@ -0,0 +1,57 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes
+AUTO_SHIFT_ENABLE = yes # If the time depressed is greater than or equal to the AUTO_SHIFT_TIMEOUT, then a shifted version of the key is emitted. If the time is less than the AUTO_SHIFT_TIMEOUT time, then the normal state is emitted

keyboards/ergodox_infinity/keymaps/halfkeyboard/keymap.c

@@ -8,7 +8,10 @@
 #define DVORAK 2 // dvorak layer 
 #define HALFDVORAK 3 // mirrored dvorak layer 
 #define SYMB 5 // symbols
-#define MDIA 6 // media keys
+#define HALFSYMB 6 // media keys
+#define PLVR 7 // steno plover layout
+#define SHORTCUTS 8 //layer with shortcut keys
+
 
 enum custom_keycodes {
   PLACEHOLDER = SAFE_RANGE, // can always be here
@@ -21,258 +24,346 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 /* Keymap 0: qwerty
  *
  * ,--------------------------------------------------.           ,--------------------------------------------------.
- * |  ESC   |   1  |   2  |   3  |   4  |   5  | LEFT |           | RIGHT|   6  |   7  |   8  |   9  |   0  |  BSPC  |
+ * |  ESC   |   1  |   2  |   3  |   4  |   5  | `    |           | \    |   6  |   7  |   8  |   9  |   0  |  BSPC  |
  * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * | TAB    |   Q  |   W  |   E  |   R  |   T  |  L1  |           |  L1  |   Y  |   U  |   I  |   O  |   P  |   \    |
+ * | TAB    |   Q  |   W  |   E  |   R  |   T  |  [   |           | ]    |   Y  |   U  |   I  |   O  |   P  |   '    |
  * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
  * | BkSp   |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |   ;  |ENTER   |
- * |--------+------+------+------+------+------| Hyper|           | Meh  |------+------+------+------+------+--------|
+ * |--------+------+------+------+------+------| -    |           | =    |------+------+------+------+------+--------|
  * | LShift |   Z  |   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |   /  | RShift |
  * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |LCTRL|ALT  |CTL-TAB|CTLShTab| LGui|                                       |  RGui| UP   | DOWN |  ALT | RCTRL  |
+ *   |LCTRL|ALT  |CTLShTab|CTL-TAB| LGui|                                       |  RGui| UP   | DOWN |  ALT | RCTRL  |
  *   `----------------------------------'                                       `----------------------------------'
  *                                        ,-------------.       ,-------------.
- *                                        | Alt  | LGui |       | RGui |Alt   |
+ *                                        |Symbol|Dvorak|       |Plover|HalfSymb|
  *                                 ,------|------|------|       |------+--------+------.
  *                                 |      |      | Home |       | PgUp |        |      |
- *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
- *                                 |mirror|ace   | End  |       | PgDn |        |mirror|
+ *                                 | Space|DELETE|------|       |------|  Tab   |Enter |
+ *                                 |mirror|      | End  |       | PgDn |        |mirror|
  *                                 `--------------------'       `----------------------'
  */
 // If it accepts an argument (i.e, is a function), it doesn't need KC_.
 // Otherwise, it needs KC_*
 [QWERTY] = LAYOUT_ergodox(  // layer 0 : default
         // left hand
-        KC_ESC,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   KC_LEFT,
-        KC_TAB,         KC_Q,         KC_W,   KC_E,   KC_R,   KC_T,   TG(SYMB),
+        KC_ESC,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   KC_GRAVE,
+        KC_TAB,         KC_Q,         KC_W,   KC_E,   KC_R,   KC_T,   KC_LBRC,
         KC_BSPC,        KC_A,         KC_S,   KC_D,   KC_F,   KC_G,
-        KC_LSFT,        KC_Z,  		  KC_X,   KC_C,   KC_V,   KC_B,   BL_ON,
-        KC_LCTRL, 		KC_LALT,	  LCTL(KC_TAB), LCTL(LSFT(KC_TAB)),  KC_LGUI,
-                                              KC_LALT,  TG(DVORAK),
+        KC_LSFT,        KC_Z,  		  KC_X,   KC_C,   KC_V,   KC_B,   KC_MINUS,
+        KC_LCTRL, 		KC_LALT,	  LCTL(LSFT(KC_TAB)),LCTL(KC_TAB),  MO(SHORTCUTS),
+                                              TG(SYMB),  TG(DVORAK),
                                                               KC_HOME,
-                                         LT(HALFQWERTY, KC_SPACE),KC_BSPC,KC_END,
+                                         LT(HALFQWERTY, KC_SPACE),KC_DEL,KC_END,
         // right hand
-             KC_RGHT,     KC_6,   KC_7,  KC_8,   KC_9,   KC_0,             KC_BSPC,
-             TG(SYMB),    KC_Y,   KC_U,  KC_I,   KC_O,   KC_P,             KC_BSLS,
+             KC_BSLS,     KC_6,   KC_7,  KC_8,   KC_9,   KC_0,             KC_BSPC,
+             KC_RBRC,    KC_Y,   KC_U,  KC_I,   KC_O,   KC_P,             KC_SLASH,
                           KC_H,   KC_J,  KC_K,   KC_L,   KC_SCLN,		   KC_ENT,
-             MEH_T(KC_NO),KC_N,   KC_M,  KC_COMM,KC_DOT, KC_SLASH,   	   KC_RSFT,
+             KC_EQL,KC_N,   KC_M,  KC_COMM,KC_DOT, KC_SLASH,   	   KC_RSFT,
                                   KC_RGUI, KC_UP,KC_DOWN,KC_RALT,           KC_RCTRL,
-             TG(DVORAK),        KC_RALT,
+             TG(PLVR),        TG(HALFSYMB),
              KC_PGUP,
              KC_PGDN,KC_TAB, LT(HALFQWERTY, KC_ENT)
     ),
 /* Keymap 1: mirrored qwerty
  *
  * ,--------------------------------------------------.           ,--------------------------------------------------.
- * |  BSPC  |   0  |   9  |   8  |   7  |   6  | LEFT |           | RIGHT|   5  |   4  |   3  |   2  |   1  |  ESC  |
+ * |  BSPC  |   0  |   9  |   8  |   7  |   6  | \    |           |   `  |   5  |   4  |   3  |   2  |   1  |  ESC  |
  * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * |  \     |   P  |   O  |   I  |   U  |   Y  |  L1  |           |  L1  |   T  |   R  |   E  |   W  |   Q  |   TAB  |
+ * |  '     |   P  |   O  |   I  |   U  |   Y  |  ]   |           |  [   |   T  |   R  |   E  |   W  |   Q  |   TAB  |
  * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
  * | ENTER  |   ;  |   L  |   K  |   J  |   H  |------|           |------|   G  |   F  |   D  |   S  |   A  | BSPC   |
- * |--------+------+------+------+------+------| Hyper|           | Meh  |------+------+------+------+------+--------|
+ * |--------+------+------+------+------+------| -    |           | =    |------+------+------+------+------+--------|
  * | LShift |   /  |   .  |   ,  |   M  |   N  |      |           |      |   B  |   V  |   C  |   X  |   Z  | RShift |
  * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |LCTRL|ALT  |CTL-TAB|CTLShTab| LGui|                                       |  RGui| UP   | DOWN |  ALT | RCTRL  |
+ *   |LCTRL|ALT  |CTLShTab|CTL-TAB| LGui|                                       |  RGui| UP   | DOWN |  ALT | RCTRL  |
  *   `----------------------------------'                                       `----------------------------------'
  *                                        ,-------------.       ,-------------.
- *                                        | Alt  | LGui |       | RGui |Alt   |
+ *                                        |      |      |       |      |      |
  *                                 ,------|------|------|       |------+--------+------.
  *                                 |      |      | Home |       | PgUp |        |      |
- *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
- *                                 |mirror|ace   | End  |       | PgDn |        |mirror|
+ *                                 | Space|DELETE|------|       |------|  Tab   |Enter |
+ *                                 |mirror|      | End  |       | PgDn |        |mirror|
  *                                 `--------------------'       `----------------------'
  */
 // If it accepts an argument (i.e, is a function), it doesn't need KC_.
 // Otherwise, it needs KC_*
 [HALFQWERTY] = LAYOUT_ergodox(  // layer 0 : default
         // left hand
-        KC_BSPC,        KC_0,         KC_9,   KC_8,   KC_7,   KC_6,   KC_LEFT,
-        KC_TAB,         KC_P,         KC_O,   KC_I,   KC_U,   KC_Y,   TG(SYMB),
-        KC_BSPC,        KC_SCLN,      KC_L,   KC_K,   KC_J,   KC_H,
-        KC_LSFT,        KC_SLASH,  	  KC_DOT, KC_COMM,KC_M,   KC_N,   KC_TRANSPARENT,
-        KC_LCTRL, 		KC_LALT,	  LCTL(KC_TAB), LCTL(LSFT(KC_TAB)),  KC_LGUI,
-                                              KC_LALT,  KC_TRANSPARENT,
+        KC_BSPC,        KC_0,         KC_9,   KC_8,   KC_7,   KC_6,   KC_BSLS,
+        KC_BSLS,         KC_P,         KC_O,   KC_I,   KC_U,   KC_Y,   KC_RBRC,
+        KC_ENT,        KC_SCLN,      KC_L,   KC_K,   KC_J,   KC_H,
+        KC_LSFT,        KC_SLASH,  	  KC_DOT, KC_COMM,KC_M,   KC_N,   KC_EQL,
+        KC_LCTRL, 		KC_LALT,	   LCTL(LSFT(KC_TAB)),LCTL(KC_TAB),  KC_TRNS,
+                                              KC_TRNS,  KC_TRANSPARENT,
                                                               KC_HOME,
-                                         KC_TRANSPARENT,KC_BSPC,KC_END,
+                                         KC_TRANSPARENT,KC_DEL,KC_END,
         // right hand
-             KC_RGHT,     KC_5,   KC_4,  KC_3,   KC_2,   KC_1,             KC_BSPC,
-             TG(SYMB),    KC_T,   KC_R,  KC_E,   KC_W,   KC_Q,             KC_BSLS,
+             KC_GRAVE,     KC_5,   KC_4,  KC_3,   KC_2,   KC_1,             KC_BSPC,
+             KC_LBRC,    KC_T,   KC_R,  KC_E,   KC_W,   KC_Q,             KC_BSLS,
                           KC_G,   KC_F,  KC_D,   KC_S,   KC_A,  		   KC_ENT,
-             MEH_T(KC_NO),KC_B,   KC_V,  KC_C,   KC_X,   KC_Z,		   	   KC_RSFT,
+             KC_MINUS,KC_B,   KC_V,  KC_C,   KC_X,   KC_Z,		   	   KC_RSFT,
                                   KC_RGUI, KC_UP,KC_DOWN,KC_RALT,           KC_RCTRL,
-             KC_TRANSPARENT,        KC_RALT,
+             KC_TRANSPARENT,        KC_TRNS,
              KC_PGUP,
              KC_PGDN,KC_TAB, KC_TRANSPARENT
     ),
 /* Keymap 3: dvorak
  *
  * ,--------------------------------------------------.           ,--------------------------------------------------.
- * |  ESC   |   1  |   2  |   3  |   4  |   5  | LEFT |           | RIGHT|   6  |   7  |   8  |   9  |   0  |  BSPC  |
+ * |  ESC   |   1  |   2  |   3  |   4  |   5  | `    |           | \    |   6  |   7  |   8  |   9  |   0  |  BSPC  |
  * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * | TAB    |   '  |   ,  |   .  |   P  |   Y  |  L1  |           |  L1  |   F  |   G  |   C  |   R  |   L  |   /    |
+ * | TAB    |   '  |   ,  |   .  |   P  |   Y  |  [   |           |  ]   |   F  |   G  |   C  |   R  |   L  |   /    |
  * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * | BkSp   |   A  |   O  |   E  |   U  |   I  |------|           |------|   D  |   H  |   T  |   S  |  -   |ENTER   |
- * |--------+------+------+------+------+------| Hyper|           | Meh  |------+------+------+------+------+--------|
+ * | BkSp   |   A  |   O  |   E  |   U  |   I  |------|           |------|   D  |   H  |   T  |   N  |   S  |ENTER   |
+ * |--------+------+------+------+------+------| -    |           | =    |------+------+------+------+------+--------|
  * | LShift |   ;  |   Q  |   J  |   K  |   X  |      |           |      |   B  |   M  |   W  |   V  |  Z   | RShift |
  * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |LCTRL|ALT  |CTL-TAB|CTLShTab| LGui|                                       |  RGui| UP   | DOWN |  ALT | RCTRL  |
+ *   |LCTRL|ALT  |CTLShTab|CTL-TAB| LGui|                                       |  RGui| UP   | DOWN |  ALT | RCTRL  |
  *   `----------------------------------'                                       `----------------------------------'
  *                                        ,-------------.       ,-------------.
- *                                        | Alt  | LGui |       | RGui |Alt   |
+ *                                        | Alt  |      |       |      |Alt   |
  *                                 ,------|------|------|       |------+--------+------.
  *                                 |      |      | Home |       | PgUp |        |      |
- *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
- *                                 |mirror|ace   | End  |       | PgDn |        |mirror|
+ *                                 | Space|DELETE|------|       |------|  Tab   |Enter |
+ *                                 |mirror|      | End  |       | PgDn |        |mirror|
  *                                 `--------------------'       `----------------------'
  */
 // If it accepts an argument (i.e, is a function), it doesn't need KC_.
 // Otherwise, it needs KC_*
 [DVORAK] = LAYOUT_ergodox(  // layer 0 : default
         // left hand
-        KC_ESC,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   KC_LEFT,
-        KC_TAB,         KC_QUOTE,	  KC_COMM,KC_DOT, KC_P,   KC_Y,   TG(SYMB),
+        KC_ESC,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   KC_GRAVE,
+        KC_TAB,         KC_QUOTE,	  KC_COMM,KC_DOT, KC_P,   KC_Y,   KC_LBRC,
         KC_BSPC,        KC_A,         KC_O,   KC_E,   KC_U,   KC_I,
-        KC_LSFT,        KC_SCLN,	  KC_Q,   KC_J,   KC_K,   KC_X,   ALL_T(KC_NO),
-        KC_LCTRL, 		KC_LALT,	  LCTL(KC_TAB), LCTL(LSFT(KC_TAB)),  KC_LGUI,
-                                              KC_LALT,  KC_TRANSPARENT,
+        KC_LSFT,        KC_SCLN,	  KC_Q,   KC_J,   KC_K,   KC_X,   KC_MINUS,
+        KC_LCTRL, 		KC_LALT,	  LCTL(LSFT(KC_TAB)),LCTL(KC_TAB),  KC_TRNS,
+                                              TG(SYMB),  KC_TRANSPARENT,
                                                               KC_HOME,
-                                         LT(HALFDVORAK, KC_SPACE),KC_BSPC,KC_END,
+                              LT(HALFDVORAK, KC_SPACE),KC_DEL,KC_END,
         // right hand
-             KC_RGHT,     KC_6,   KC_7,  KC_8,   KC_9,   KC_0,             KC_BSPC,
-             TG(SYMB),    KC_F,   KC_G,  KC_C,   KC_R,   KC_L,             KC_BSLS,
-                          KC_D,   KC_H,  KC_T,   KC_S,   KC_MINUS,		   KC_ENT,
-             MEH_T(KC_NO),KC_B,   KC_M,  KC_W,	 KC_V,	 KC_Z,		   	   KC_RSFT,
+             KC_BSLS,     KC_6,   KC_7,  KC_8,   KC_9,   KC_0,             KC_BSPC,
+             KC_RBRC,    KC_F,   KC_G,  KC_C,   KC_R,   KC_L,             KC_SLASH,
+                          KC_D,   KC_H,  KC_T,   KC_N,   KC_S,		   KC_ENT,
+             KC_EQL,KC_B,   KC_M,  KC_W,	 KC_V,	 KC_Z,		   	   KC_RSFT,
                                   KC_RGUI, KC_UP,KC_DOWN,KC_RALT,           KC_RCTRL,
-             KC_TRANSPARENT,        KC_RALT,
+             KC_TRANSPARENT,        TG(HALFSYMB),
              KC_PGUP,
              KC_PGDN,KC_TAB, LT(HALFDVORAK, KC_ENT)
     ),
 /* Keymap 3: mirrored dvorak
  *
  * ,--------------------------------------------------.           ,--------------------------------------------------.
- * |  BSPC  |   0  |   9  |   8  |   7  |   6  | LEFT |           | RIGHT|   5  |   4  |   3  |   2  |   1  |  ESC  |
+ * |  BSPC  |   0  |   9  |   8  |   7  |   6  | \    |           | `    |   5  |   4  |   3  |   2  |   1  |  ESC  |
  * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * | TAB    |   L  |   R  |   C  |   G  |   F  |  L1  |           |  L1  |   Y  |   P  |   .  |   ,  |   '  |   /    |
+ * |   	/   |   L  |   R  |   C  |   G  |   F  |  L1  |           |  L1  |   Y  |   P  |   .  |   ,  |   '  |   TAB  |
  * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * | BkSp   |   -  |   S  |   T  |   H  |   D  |------|           |------|   I  |   U  |   E  |   O  |   A  |ENTER   |
- * |--------+------+------+------+------+------| Hyper|           | Meh  |------+------+------+------+------+--------|
+ * | ENTER  |   S  |   N  |   T  |   H  |   D  |------|           |------|   I  |   U  |   E  |   O  |   A  |BSPC    |
+ * |--------+------+------+------+------+------| =    |           | -    |------+------+------+------+------+--------|
  * | LShift |   Z  |   V  |   W  |   M  |   B  |      |           |      |   X  |   K  |   J  |   Q  |   ;  | RShift |
  * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |LCTRL|ALT  |CTL-TAB|CTLShTab| LGui|                                       |  RGui| UP   | DOWN |  ALT | RCTRL  |
+ *   |LCTRL|ALT  |CTLShTab|CTL-TAB| LGui|                                       |  RGui| UP   | DOWN |  ALT | RCTRL  |
  *   `----------------------------------'                                       `----------------------------------'
  *                                        ,-------------.       ,-------------.
- *                                        | Alt  | LGui |       | RGui |Alt   |
+ *                                        | Alt  |      |       |      |Alt   |
  *                                 ,------|------|------|       |------+--------+------.
  *                                 |      |      | Home |       | PgUp |        |      |
- *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
- *                                 |mirror|ace   | End  |       | PgDn |        |mirror|
+ *                                 | Space|DELETE|------|       |------|  Tab   |Enter |
+ *                                 |mirror|      | End  |       | PgDn |        |mirror|
  *                                 `--------------------'       `----------------------'
  */
 // If it accepts an argument (i.e, is a function), it doesn't need KC_.
 // Otherwise, it needs KC_*
 [HALFDVORAK] = LAYOUT_ergodox(  // layer 0 : default
         // left hand
-        KC_BSPC,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   KC_LEFT,
-        KC_SLASH,         KC_L,         KC_R,   KC_C,   KC_G,   KC_F,   TG(SYMB),
+        KC_BSPC,         KC_0,         KC_9,   KC_8,   KC_7,   KC_6,   KC_BSLS,
+        KC_SLASH,         KC_L,         KC_R,   KC_C,   KC_G,   KC_F,   KC_RBRC,
         KC_ENT,        KC_S,         KC_N,   KC_T,   KC_H,   KC_D,
-        KC_LSFT,        KC_Z,  		  KC_V,   KC_W,   KC_M,   KC_B,   ALL_T(KC_NO),
-        KC_LCTRL, 		KC_LALT,	  LCTL(KC_TAB), LCTL(LSFT(KC_TAB)),  KC_LGUI,
-                                              KC_LALT,  KC_TRANSPARENT,
+        KC_LSFT,        KC_Z,  		  KC_V,   KC_W,   KC_M,   KC_B,   KC_EQL,
+        KC_LCTRL, 		KC_LALT,	  LCTL(LSFT(KC_TAB)),LCTL(KC_TAB),  KC_TRNS,
+                                              KC_TRANSPARENT,  KC_TRANSPARENT,
                                                               KC_HOME,
-                                         KC_TRANSPARENT,KC_BSPC,KC_END,
+                                         KC_TRANSPARENT,KC_DEL,KC_END,
         // right hand
-             KC_RGHT,     KC_6,   KC_7,  KC_8,   KC_9,   KC_0,             KC_ESC,
-             TG(SYMB),    KC_Y,   KC_P,  KC_DOT, KC_COMM,KC_P,             KC_TAB,
-                          KC_I,   KC_U,  KC_E,   KC_O,   KC_A,		 	   KC_ENT,
-             MEH_T(KC_NO),KC_X,   KC_K,  KC_J,	 KC_Q,   KC_SCLN,	   	   KC_RSFT,
+             KC_GRAVE,     KC_5,   KC_4,  KC_3,   KC_2,   KC_5,             KC_ESC,
+             KC_LBRC,    KC_Y,   KC_P,  KC_DOT, KC_COMM,KC_P,             KC_TAB,
+                          KC_I,   KC_U,  KC_E,   KC_O,   KC_A,		 	   KC_BSPC,
+             KC_MINUS,KC_X,   KC_K,  KC_J,	 KC_Q,   KC_SCLN,	   	   KC_RSFT,
                                   KC_RGUI, KC_UP,KC_DOWN,KC_RALT,           KC_RCTRL,
-             KC_TRANSPARENT,        KC_RALT,
+             KC_TRANSPARENT,        KC_TRNS,
              KC_PGUP,
              KC_PGDN,KC_TAB, KC_TRANSPARENT
     ),
 /* Keymap 5: Symbol Layer
  *
  * ,---------------------------------------------------.           ,--------------------------------------------------.
- * |Version  |  F1  |  F2  |  F3  |  F4  |  F5  |      |           |      |  F6  |  F7  |  F8  |  F9  |  F10 |   F11  |
+ * |Version  |  F1  |  F2  |  F3  |  F4  |  F5  |   F6 |           |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |BkSp    |
  * |---------+------+------+------+------+------+------|           |------+------+------+------+------+------+--------|
- * |         |   !  |   @  |   {  |   }  |   |  |      |           |      |   Up |   7  |   8  |   9  |   *  |   F12  |
+ * |         |   /  |   \  |   {  |   }  |   |  |      |           |      |   Up |   7  |   8  |   9  |   *  |   /    |
  * |---------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |         |   #  |   $  |   (  |   )  |   `  |------|           |------| Down |   4  |   5  |   6  |   +  |        |
+ * |         |   '  |   ;  |   (  |   )  |   `  |------|           |------| Down |   4  |   5  |   6  |   -  | ENTER  |
  * |---------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |         |   %  |   ^  |   [  |   ]  |   ~  |      |           |      |   &  |   1  |   2  |   3  |   \  |        |
+ * |         |   -  |   =  |   [  |   ]  |   ~  |      |           |      |   &  |   1  |   2  |   3  |   +  |        |
  * `---------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
  *   | EPRM  |      |      |      |      |                                       |      |    . |   0  |   =  |      |
  *   `-----------------------------------'                                       `----------------------------------'
  *                                        ,-------------.       ,-------------.
- *                                        |Animat|      |       |Toggle|Solid |
+ *                                        |      |      |       |      |      |
  *                                 ,------|------|------|       |------+------+------.
- *                                 |Bright|Bright|      |       |      |Hue-  |Hue+  |
- *                                 |ness- |ness+ |------|       |------|      |      |
  *                                 |      |      |      |       |      |      |      |
+ *                                 |mirror|      |------|       |------|      |mirror|
+ *                                 |space |      |      |       |      |      |enter |
  *                                 `--------------------'       `--------------------'
  */
 // SYMBOLS
 [SYMB] = LAYOUT_ergodox(
        // left hand
-       VRSN,   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_TRNS,
-       KC_TRNS,KC_EXLM,KC_AT,  KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS,
-       KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV,
-       KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS,
-          EPRM,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
-                                       RGB_MOD,KC_TRNS,
-                                               KC_TRNS,
-                               RGB_VAD,RGB_VAI,KC_TRNS,
+       VRSN,   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,
+       KC_NO,KC_SLASH,KC_BSLS,  KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS,
+       KC_NO,KC_QUOT,KC_SCLN, KC_LPRN,KC_RPRN,KC_GRV,
+       KC_NO,KC_MINUS,KC_EQL,KC_LBRC,KC_RBRC,KC_TILD,KC_NO,
+          EPRM,KC_NO,KC_NO,KC_NO,KC_TRNS,
+                                         KC_TRNS,KC_NO,
+                                               KC_NO,
+                          LT(HALFSYMB, KC_SPACE),KC_NO,KC_NO,
        // right hand
-       KC_TRNS, KC_F6,   KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_F11,
-       KC_TRNS, KC_UP,   KC_7,   KC_8,    KC_9,    KC_ASTR, KC_F12,
-                KC_DOWN, KC_4,   KC_5,    KC_6,    KC_PLUS, KC_TRNS,
-       KC_TRNS, KC_AMPR, KC_1,   KC_2,    KC_3,    KC_BSLS, KC_TRNS,
-                         KC_TRNS,KC_DOT,  KC_0,    KC_EQL,  KC_TRNS,
-       RGB_TOG, RGB_SLD,
-       KC_TRNS,
-       KC_TRNS, RGB_HUD, RGB_HUI
+       KC_F7, KC_F8,   KC_F9,  KC_F10,   KC_F11,   KC_F12,  KC_BSPC,
+       KC_NO, KC_UP, KC_KP_7, KC_KP_8,  KC_KP_9,KC_KP_ASTERISK, KC_KP_SLASH,
+            KC_DOWN, KC_KP_4, KC_KP_5,  KC_KP_6,  KC_KP_MINUS, KC_KP_ENTER,
+       KC_NO,KC_AMPR,KC_KP_1, KC_KP_2,  KC_KP_3,   KC_KP_PLUS, KC_NO,
+                         KC_NO,KC_DOT,  KC_0,    KC_KP_EQUAL,  KC_NO,
+       KC_NO, KC_TRNS,
+       KC_NO,
+       KC_NO, KC_NO, LT(HALFSYMB, KC_ENT)
 ),
-/* Keymap 6: Media and mouse keys
+/* Keymap 6: Mirrored Symbol Layer
+ *
+ * ,---------------------------------------------------.           ,--------------------------------------------------.
+ * |delete   |  F12 |  F11 |  F10 |  F9  |  F8  |   F7 |           |  F6  |  F5  |  F4  |  F3  |  F2  |  F1  |BkSp    |
+ * |---------+------+------+------+------+------+------|           |------+------+------+------+------+------+--------|
+ * |         |      |   7  |   8  |   9  |   *  |   /  |           |      |   |  |   {  |   }  |   /  |   \  |        |
+ * |---------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |         |      |   4  |   5  |   6  |   -  |------|           |------|   `  |   (  |   )  |   ;  |   '  |        |
+ * |---------+------+------+------+------+------|enter |           |      |------+------+------+------+------+--------|
+ * |         |      |   1  |   2  |   3  |   +  |      |           |      |   ~  |   [  |   ]  |   =  |   -  |        |
+ * `---------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   | EPRM  |      |   0  |  .   |  =   |                                       |      |      |      |      |      |
+ *   `-----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// SYMBOLS
+[HALFSYMB] = LAYOUT_ergodox(
+       // left hand
+       KC_BSPC,     KC_F12,  KC_F11,  KC_F10,  KC_F9,  KC_F8,  KC_F7,
+       KC_NO,KC_NO,KC_KP_7, KC_KP_8, KC_KP_9,KC_KP_ASTERISK,KC_KP_SLASH,
+       KC_ENTER,KC_NO,KC_KP_4, KC_KP_5, KC_KP_6,KC_KP_MINUS,
+       KC_NO,KC_NO,KC_KP_1, KC_KP_2, KC_KP_3,KC_KP_PLUS,KC_KP_ENTER,
+          EPRM,KC_NO,KC_KP_0,KC_KP_DOT,KC_KP_EQUAL,
+                                         KC_TRNS,KC_NO,
+                                               KC_NO,
+                          KC_TRANSPARENT,KC_NO,KC_NO,
+       // right hand
+       KC_F6, KC_F5,   KC_F4,  KC_F3,   KC_F2,   KC_F1,  KC_BSPC,
+       KC_NO,KC_PIPE,KC_LCBR,KC_RCBR, KC_SLASH, KC_BSLS, KC_NO,
+             KC_GRV,KC_LPRN,KC_RPRN,  KC_SCLN, KC_QUOT, KC_NO,
+       KC_NO, KC_TILD,KC_LBRC,KC_RBRC, KC_EQL,  KC_MINUS, KC_NO,
+                         KC_NO,KC_NO,  KC_NO,    KC_NO,  KC_NO,
+       KC_NO, KC_TRNS,
+       KC_NO,
+       KC_NO, KC_NO, KC_TRANSPARENT
+),
+
+/* Keymap 7: Steno for Plover from https://github.com/shayneholmes/tmk_keyboard/commit/11290f8489013018f778627db725160c745e75bd
  *
  * ,--------------------------------------------------.           ,--------------------------------------------------.
  * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
  * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * |        |      |      | MsUp |      |      |      |           |      |      |      |      |      |      |        |
+ * |        |   1  |   2  |   3  |   4  |   5  |      |           |      |  6   |  7   |   8  |   9  |  0   |        |
  * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |      |MsLeft|MsDown|MsRght|      |------|           |------|      |      |      |      |      |  Play  |
+ * |        |   q  |   w  |   e  |   r  |   t  |------|           |------|  y   |  u   |   i  |   o  |  p   |   [    |
  * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |      |      |      |      |      |      |           |      |      |      | Prev | Next |      |        |
+ * |        |   a  |   s  |   d  |   f  |   g  |      |           |      |  h   |  j   |   k  |   l  |  ;   |   '    |
  * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |      |      |      | Lclk | Rclk |                                       |VolUp |VolDn | Mute |      |      |
+ *   |      |      |      |      |      |                                       |      |      |      |      |      |
  *   `----------------------------------'                                       `----------------------------------'
  *                                        ,-------------.       ,-------------.
  *                                        |      |      |       |      |      |
  *                                 ,------|------|------|       |------+------+------.
- *                                 |      |      |      |       |      |      |Brwser|
- *                                 |      |      |------|       |------|      |Back  |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |   c  |   v  |------|       |------|  n   |  m   |
  *                                 |      |      |      |       |      |      |      |
  *                                 `--------------------'       `--------------------'
  */
-// MEDIA AND MOUSE
-[MDIA] = LAYOUT_ergodox(
-       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2,
-                                           KC_TRNS, KC_TRNS,
-                                                    KC_TRNS,
-                                  KC_TRNS, KC_TRNS, KC_TRNS,
-    // right hand
-       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY,
-       KC_TRNS,  KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS,
-                          KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS,
-       KC_TRNS, KC_TRNS,
-       KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_WBAK
+
+[PLVR] = LAYOUT_ergodox(  // layout: layer 4: Steno for Plover
+        // left hand
+        KC_NO, KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,
+        KC_NO,  KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_TRNS,
+        KC_NO,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,
+        KC_NO,  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_NO,
+        KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,
+                                      KC_FN4, KC_NO,
+                                           KC_NO,
+                                 KC_C,   KC_V,   KC_NO,
+        // right hand
+             KC_TRNS,  KC_NO,   KC_NO,   KC_NO,  KC_NO,   KC_NO,   KC_TRNS,
+             KC_TRNS,   KC_6,    KC_7,    KC_8,   KC_9,    KC_0,   KC_TRNS,
+                        KC_Y,   KC_U,    KC_I,    KC_O,   KC_P,    KC_LBRC,
+               KC_NO,   KC_H,    KC_J,    KC_K,   KC_L, KC_SCLN,   KC_QUOT,
+                              KC_TRNS, KC_TRNS,  KC_NO,   KC_NO,     KC_NO,
+        KC_TRNS, KC_TRNS,
+        KC_TRNS,
+        KC_NO,  KC_N,   KC_M
 ),
+/* Keymap 8: shortcuts
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |  ESC   |   1  |   2  |   3  |   4  |   5  | LEFT |           | RIGHT|   6  |   7  |   8  |   9  |   0  |  BSPC  |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | TAB    |   Q  |   W  |   E  |   R  |   T  |  L1  |           |  L1  |   Y  |   U  |   I  |   O  |   P  |   \    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | BkSp   |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |   ;  |ENTER   |
+ * |--------+------+------+------+------+------| -    |           | =    |------+------+------+------+------+--------|
+ * | LShift |   Z  |   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |   /  | RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |LCTRL|ALT  |CTLShTab|CTL-TAB|     |                                       |  RGui| UP   | DOWN |  ALT | RCTRL  |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        | Alt  |Dvorak|       |Plover|Alt   |
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      | Home |       | PgUp |        |      |
+ *                                 | Space|DELETE|------|       |------|  Tab   |Enter |
+ *                                 |mirror|      | End  |       | PgDn |        |mirror|
+ *                                 `--------------------'       `----------------------'
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[SHORTCUTS] = LAYOUT_ergodox(  // layer 0 : default
+        // left hand
+        KC_ESC,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   KC_NO,
+        KC_TAB,   LCTL(KC_Q),   LCTL(KC_W),LCTL(KC_E),LCTL(KC_R),LCTL(KC_T),   KC_NO,
+        KC_BSPC,  LCTL(KC_A),   LCTL(KC_S),LCTL(KC_D),LCTL(KC_F),LCTL(KC_G),
+        KC_LSFT,  LCTL(KC_Z),  	LCTL(KC_X),LCTL(KC_C),LCTL(KC_V),LCTL(KC_B),   KC_MINUS,
+        KC_LCTRL, 		KC_LALT,	  LCTL(LSFT(KC_TAB)),LCTL(KC_TAB),  KC_TRANSPARENT,
+                                              KC_NO,  KC_NO,
+
+                                                              KC_NO,
+                                         KC_NO,KC_NO,KC_NO,
+        // right hand
+             KC_RGHT,     KC_6,   KC_7,  KC_8,   KC_9,   KC_0,             KC_BSPC,
+             TG(SYMB),    KC_Y,   KC_U,  KC_I,   KC_O,   KC_P,             KC_BSLS,
+                          KC_H,   KC_J,  KC_K,   KC_L,   KC_SCLN,		   KC_ENT,
+             KC_EQL,KC_N,   KC_M,  KC_COMM,KC_DOT, KC_SLASH,   	   KC_RSFT,
+                                  KC_RGUI, KC_UP,KC_DOWN,KC_RALT,           KC_RCTRL,
+             KC_NO,        KC_NO,
+             KC_NO,
+             KC_NO,KC_NO, KC_NO
+    ),
 };
 
 const uint16_t PROGMEM fn_actions[] = {

keyboards/ergodox_infinity/keymaps/halfkeyboard/visualizer.c

@@ -0,0 +1,72 @@
+/*
+Copyright 2017 Fred Sundvik
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "simple_visualizer.h"
+
+#define RED 0
+#define ORANGE 21
+#define YELLOW 42
+#define SPRING_GREEN 64
+#define GREEN 85
+#define TURQUOISE 107
+#define CYAN 127
+#define OCEAN 149
+#define BLUE 170
+#define VIOLET 192
+#define MAGENTA 212
+#define RASPBERRY 234
+
+// This function should be implemented by the keymap visualizer
+// Don't change anything else than state->target_lcd_color and state->layer_text as that's the only thing
+// that the simple_visualizer assumes that you are updating
+// Also make sure that the buffer passed to state->layer_text remains valid until the previous animation is
+// stopped. This can be done by either double buffering it or by using constant strings
+static void get_visualizer_layer_and_color(visualizer_state_t* state) {
+    uint8_t saturation = 255;
+    /* if (state->status.leds & (1u << USB_LED_CAPS_LOCK)) {
+        saturation = 255;
+    } */
+    if (state->status.layer & 0x100) {
+        state->target_lcd_color = LCD_COLOR(MAGENTA, saturation, 0xFF);
+        state->layer_text = "Shortcuts Layer";
+    }
+    else    if (state->status.layer & 0x80) {
+        state->target_lcd_color = LCD_COLOR(VIOLET, saturation, 0xFF);
+        state->layer_text = "Plover";
+    }
+    else if (state->status.layer & 0x40) {
+        state->target_lcd_color = LCD_COLOR(RASPBERRY, saturation, 0xFF);
+        state->layer_text = "Mirrored Symbols";
+    }
+    else if (state->status.layer & 0x20) {
+        state->target_lcd_color = LCD_COLOR(RED, saturation, 0xFF);
+        state->layer_text = "Symbols";
+    }
+    else if (state->status.layer & 0x8) {
+        state->target_lcd_color = LCD_COLOR(OCEAN, saturation, 0xFF);
+        state->layer_text = "Mirrored Dvorak";
+    }
+    else if (state->status.layer & 0x4) {
+        state->target_lcd_color = LCD_COLOR(BLUE, saturation, 0xFF);
+        state->layer_text = "Dvorak";
+    }
+    else if (state->status.layer & 0x2) {
+        state->target_lcd_color = LCD_COLOR(ORANGE, saturation, 0xFF);
+        state->layer_text = "Mirrored Qwerty";
+    }
+    else {
+        state->target_lcd_color = LCD_COLOR(YELLOW, saturation, 0xFF);
+        state->layer_text = "Qwerty";
+    }
+}

keyboards/readme.md

@@ -44,6 +44,7 @@ These keyboards are part of the QMK repository, but their manufacturers are not
 * [Happy Hacking Keyboard](/keyboards/hhkb) — The Happy Hacking keyboard can be hacked with a custom controller to run QMK.
 * [Infinity 60%](/keyboards/infinity60) - — Compact community keyboard by Input Club.
 * [JD45](/keyboards/jd45) — Another Geekhack community project, designed by jdcarpe.
+* [JJ40](/keyboards/jj40) — ps2avrGB based ortholinear sold by KPrepublic
 * [KBD75](/keyboards/kbd75) — A 75% keyboard made by made by KBDFans.
 * [KC60](/keyboards/kc60) — A programmable Chinese-made keyboard, lost in the mists of time.
 * [Kinesis Advantage](/keyboards/kinesis) — Contoured ergonomic keyboard by Kinesis Computer Ergonomics.
@@ -59,3 +60,4 @@ These keyboards are part of the QMK repository, but their manufacturers are not
 * [WhiteFox](/keyboards/whitefox) — A 65% keyboard designed as a partnership by matt3o, Massdrop and Input Club
 * [Vision Division](/keyboards/vision_division) — Full Size / Split Linear Keyboard by IBNobody.
 * [XD75](/keyboards/xd75) — 15x5 ortholinear keyboard by XIUDI.
+* [YMDK NP21](/keyboards/ymdk_np21) — ps2avrGB based number pad (numpad) sold by YMDK on Aliexpress. 

keyboards/xd75/keymaps/kloki/keymap.c

@@ -20,14 +20,15 @@
 #define _QW 1
 #define _NUM 2
 #define _SYM 3
+#define _FUN 4
 
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 
  [_WO] = { /* WORKMAN */
-  { KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_LSFT, TG(_NUM),TG(_QW),KC_6,    KC_7,   KC_8,    KC_9,    KC_0,    KC_BSPC },
-  { KC_TAB,  KC_Q,    KC_D,    KC_R,    KC_W,   KC_B,   KC_GRV,  KC_LGUI, KC_QUOT, KC_J,   KC_F,   KC_U,    KC_P,    KC_SCLN, KC_QUOT },
+  { KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   MO(_FUN),TG(_NUM),TG(_QW),KC_6,    KC_7,   KC_8,    KC_9,    KC_0,    KC_BSPC },
+  { KC_TAB,  KC_Q,    KC_D,    KC_R,    KC_W,   KC_B,   KC_GRV,  KC_LGUI, KC_QUOT, KC_J,   KC_F,   KC_U,    KC_P,    KC_SCLN, KC_BSLS },
   { CTL_T(KC_ESC),KC_A,KC_S,   KC_H,    KC_T,   KC_G,   KC_EQL,  KC_UP,   KC_MINS, KC_Y,   KC_N,   KC_E,    KC_O,    KC_I,    KC_ENT  },
   { KC_LSFT, KC_Z,    KC_X,    KC_M,    KC_C,   KC_V,   KC_LEFT, KC_DOWN, KC_RGHT, KC_K,   KC_L,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT },
   { KC_MEH,KC_LGUI,KC_LALT,KC_LEFT,KC_RGHT,LT(_SYM,KC_SPC),LGUI_T(KC_ENT),KC_SPC,LT(_SYM,KC_TAB),KC_BSPC,KC_DOWN,KC_UP,KC_LBRC,KC_RBRC,MO(_SYM)},
@@ -49,11 +50,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   { _______,  _______, _______, _______, _______,_______,_______, KC_0, _______, _______,_______,_______, _______, _______, _______ },
  },
  [_SYM] = { /* SYM */
-  { _______,  KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5,  _______, KC_F11,  KC_F12,  KC_F6,  KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_DEL, },
-  { _______,  KC_EXLM, KC_AT,   KC_LCBR, KC_RCBR,KC_ASTR,_______, _______, _______, KC_LABK,KC_HOME,KC_UP,   KC_PGUP, KC_ASTR, _______ },
+  { _______,  KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5,  _______, _______, _______, KC_F6,  KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_DEL, },
+  { _______,  KC_EXLM, KC_AT,   KC_LCBR, KC_RCBR,KC_ASTR,_______, KC_F11,  KC_F12,  KC_LABK,KC_HOME,KC_UP,   KC_PGUP, KC_ASTR, _______ },
   { _______,  KC_HASH, KC_DLR,  KC_LPRN, KC_RPRN,KC_GRV, _______, _______, _______, KC_RABK,KC_LEFT,KC_DOWN, KC_RIGHT,KC_PLUS, _______ },
   { _______,  KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC,KC_TILD,_______, _______, _______, KC_AMPR,KC_END, KC_DOWN, KC_PGDN, KC_BSLS, _______ },
   { _______,  _______, _______, _______, _______,_______,_______, _______, _______, _______,_______,_______, _______, _______, _______ },
+ },
+ [_FUN] = { /* FUN */
+  { _______,  RGB_RMOD,RGB_MOD, RGB_TOG, _______,_______,_______, _______, _______, _______,_______,_______, _______, _______, RESET   },
+  { _______,  RGB_HUD, RGB_HUI, RGB_MODE_PLAIN, _______,_______,_______, _______, _______, _______,_______,_______, _______, _______, _______ },
+  { _______,  RGB_SAD, RGB_SAI, _______, _______,_______,_______, _______, _______, _______,_______,_______, _______, _______, _______ },
+  { _______,  RGB_VAD, RGB_VAI, _______, _______,_______,_______, _______, _______, _______,_______,_______, _______, _______, _______ },
+  { _______,  _______, _______, _______, _______,_______,_______, _______, _______, _______,_______,_______, _______, _______, _______ },
  }
 };
 const uint16_t PROGMEM fn_actions[] = {
@@ -77,3 +85,85 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
       }
     return MACRO_NONE;
 };
+
+bool CTRLDOWN = false;
+bool WINDOWN = false;
+bool SHIFTDOWN = false;
+void matrix_scan_user(void) {
+
+    uint8_t layer = biton32(layer_state);
+
+    switch (layer) {
+        case 0:
+            rgblight_setrgb(0,240, 255);
+            break;
+        case 1:
+            rgblight_setrgb(0,255, 100);
+            break;
+        case 2:
+            rgblight_setrgb(10,255, 0);
+            break;
+        case 3:
+            rgblight_setrgb(255,0, 85);
+            break;
+        case 4:
+            rgblight_setrgb(240,255, 0);
+            break;
+        default:
+            // none
+            break;
+    }
+    if ( SHIFTDOWN) {
+        rgblight_setrgb(255,255, 255);
+        }
+    if ( CTRLDOWN) {
+        rgblight_setrgb(240,255, 0);
+        }
+    if ( WINDOWN) {
+        rgblight_setrgb(255,255, 255);
+        }
+
+
+
+};
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case KC_LGUI:
+      if (record->event.pressed) {
+        WINDOWN = true;
+        } else {
+        WINDOWN = false;
+      }
+      return true;
+    case LGUI_T(KC_ENT):
+      if (record->event.pressed) {
+        WINDOWN = true;
+        } else {
+        WINDOWN = false;
+      }
+      return true;
+    case CTL_T(KC_ESC):
+      if (record->event.pressed) {
+        CTRLDOWN = true;
+        } else {
+        CTRLDOWN = false;
+      }
+      return true;
+    case KC_LSFT:
+      if (record->event.pressed) {
+        SHIFTDOWN = true;
+        } else {
+        SHIFTDOWN = false;
+      }
+      return true;
+    case KC_RSFT:
+      if (record->event.pressed) {
+        SHIFTDOWN = true;
+        } else {
+        SHIFTDOWN = false;
+      }
+      return true;
+    default:
+      return true; // Process all other keycodes normally
+  }
+};

keyboards/ymdk_np21/README.md

@@ -0,0 +1,17 @@
+# YMDK NP21
+
+![kp21 — full grid layout](https://ae01.alicdn.com/kf/HTB1d.txfHsTMeJjSszhq6AGCFXaF.jpg?size=35021&height=662&width=1000&hash=62b3a453686e2154dc51a7af67495e28)
+
+ps2avrGB based number-pad sold fully assembled by YMDK on Aliexpress.
+
+Keyboard Maintainer: [QMK Community](https://github.com/qmk)  
+Hardware Supported: Atmega32A
+Hardware Availability: [AliExpress](https://www.aliexpress.com/item/21-Key-NPKC-Programmable-Cherry-MX-Kailh-Gateron-Switches-Mechanical-Keyboard-Numpad-Free-shipping/32812732361.html)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make ymdk_np21:default:program
+
+Plugging the board in while pressing 'Top Left Key' (USB on top) will force it to boot bootloader without loading the firmware.
+
+The code for NP21 is a minor edit of jj40.

keyboards/ymdk_np21/backlight.c

@@ -0,0 +1,212 @@
+/**
+ * Backlighting code for PS2AVRGB boards (ATMEGA32A)
+ * Kenneth A. (github.com/krusli | krusli.me)
+ */
+
+#include "backlight.h"
+#include "quantum.h"
+
+#include <avr/pgmspace.h>
+#include <avr/interrupt.h>
+
+#include "backlight_custom.h"
+#include "breathing_custom.h"
+
+// DEBUG
+#include <stdlib.h>
+#include <stdio.h>
+
+// Port D: digital pins of the AVR chipset
+#define NUMLOCK_PORT    (1 << 1)  // 1st pin of Port D (digital)
+#define CAPSLOCK_PORT   (1 << 2)  // 2nd pin
+#define BACKLIGHT_PORT  (1 << 4)  // 4th pin
+#define SCROLLLOCK_PORT (1 << 6)  // 6th pin
+
+#define TIMER_CLK_DIV64			  0x03	///< Timer clocked at F_CPU/64
+#define TIMER1PRESCALE	TIMER_CLK_DIV64 ///< timer 1 prescaler default
+
+#define TIMER_PRESCALE_MASK		0x07	///< Timer Prescaler Bit-Mask
+
+#define PWM_MAX 0xFF
+#define TIMER_TOP 255 // 8 bit PWM
+
+extern backlight_config_t backlight_config;
+
+/**
+ * References
+ * Port Registers: https://www.arduino.cc/en/Reference/PortManipulation
+ * TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b
+ * Timers: http://www.avrbeginners.net/architecture/timers/timers.html
+ * 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/
+ * PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware
+ */
+
+// @Override
+// turn LEDs on and off depending on USB caps/num/scroll lock states.
+void led_set_user(uint8_t usb_led) {
+    if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+      // turn on
+      DDRD  |= NUMLOCK_PORT;
+      PORTD |= NUMLOCK_PORT;
+    } else {
+      // turn off
+      DDRD  &= ~NUMLOCK_PORT;
+      PORTD &= ~NUMLOCK_PORT;
+    }
+
+    if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+      DDRD  |= CAPSLOCK_PORT;
+      PORTD |= CAPSLOCK_PORT;
+    } else {
+      DDRD  &= ~CAPSLOCK_PORT;
+      PORTD &= ~CAPSLOCK_PORT;
+    }
+
+    if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+      DDRD  |= SCROLLLOCK_PORT;
+      PORTD |= SCROLLLOCK_PORT;
+    } else {
+      DDRD  &= ~SCROLLLOCK_PORT;
+      PORTD &= ~SCROLLLOCK_PORT;
+    }
+}
+
+#ifdef BACKLIGHT_ENABLE
+
+// sets up Timer 1 for 8-bit PWM
+void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE
+  // default 8 bit mode
+  TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH
+  TCCR1A |= (1 << 0);  // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW
+
+  // clear output compare value A
+  // outb(OCR1AH, 0);
+  // outb(OCR1AL, 0);
+
+  // clear output comparator registers for B
+	OCR1BH = 0; // outb(OCR1BH, 0);
+	OCR1BL = 0; // outb(OCR1BL, 0);
+}
+
+bool is_init = false;
+void timer1Init(void) {
+  // timer1SetPrescaler(TIMER1PRESCALE)
+  // set to DIV/64
+  (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE;
+
+  // reset TCNT1
+  TCNT1H = 0;  // outb(TCNT1H, 0);
+	TCNT1L = 0;  // outb(TCNT1L, 0);
+
+  // TOIE1: Timer Overflow Interrupt Enable (Timer 1);
+	TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1);
+
+  is_init = true;
+}
+
+void timer1UnInit(void) {
+  // set prescaler back to NONE
+  (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00;  // TIMERRTC_CLK_STOP
+
+  // disable timer overflow interrupt
+  TIMSK &= ~_BV(TOIE1); // overflow bit?
+
+  setPWM(0);
+
+  is_init = false;
+}
+
+
+// handle TCNT1 overflow
+//! Interrupt handler for tcnt1 overflow interrupt
+ISR(TIMER1_OVF_vect, ISR_NOBLOCK)
+{
+	// sei();
+  // handle breathing here
+  #ifdef BACKLIGHT_BREATHING
+  if (is_breathing()) {
+    custom_breathing_handler();
+  }
+  #endif
+
+  // TODO call user defined function
+}
+
+// enable timer 1 PWM
+// timer1PWMBOn()
+void timer1PWMBEnable(void) {
+  // turn on channel B (OC1B) PWM output
+  // set OC1B as non-inverted PWM
+  TCCR1A |= _BV(COM1B1);
+  TCCR1A &= ~_BV(COM1B0);
+}
+
+// disable timer 1 PWM
+// timer1PWMBOff()
+void timer1PWMBDisable(void) {
+  TCCR1A &= ~_BV(COM1B1);
+  TCCR1A &= ~_BV(COM1B0);
+}
+
+void enableBacklight(void) {
+  DDRD  |= BACKLIGHT_PORT;  // set digital pin 4 as output
+  PORTD |= BACKLIGHT_PORT;  // set digital pin 4 to high
+}
+
+void disableBacklight(void) {
+  // DDRD  &= ~BACKLIGHT_PORT;  // set digital pin 4 as input
+  PORTD &= ~BACKLIGHT_PORT;  // set digital pin 4 to low
+}
+
+void startPWM(void) {
+  timer1Init();
+  timer1PWMBEnable();
+  enableBacklight();
+}
+
+void stopPWM(void) {
+  timer1UnInit();
+  disableBacklight();
+  timer1PWMBDisable();
+}
+
+void b_led_init_ports(void) {
+  /* turn backlight on/off depending on user preference */
+  #if BACKLIGHT_ON_STATE == 0
+    // DDRx register: sets the direction of Port D
+    // DDRD  &= ~BACKLIGHT_PORT;  // set digital pin 4 as input
+    PORTD &= ~BACKLIGHT_PORT;  // set digital pin 4 to low
+  #else
+    DDRD  |= BACKLIGHT_PORT;  // set digital pin 4 as output
+    PORTD |= BACKLIGHT_PORT;  // set digital pin 4 to high
+  #endif
+
+  timer1PWMSetup();
+  startPWM();
+
+  #ifdef BACKLIGHT_BREATHING
+  breathing_enable();
+  #endif
+}
+
+void b_led_set(uint8_t level) {
+  if (level > BACKLIGHT_LEVELS) {
+    level = BACKLIGHT_LEVELS;
+  }
+
+  setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS));
+}
+
+// called every matrix scan
+void b_led_task(void) {
+  // do nothing for now
+}
+
+void setPWM(uint16_t xValue) {
+  if (xValue > TIMER_TOP) {
+    xValue = TIMER_TOP;
+  }
+  OCR1B = xValue; // timer1PWMBSet(xValue);
+}
+
+#endif  // BACKLIGHT_ENABLE

keyboards/ymdk_np21/backlight_custom.h

@@ -0,0 +1,15 @@
+/**
+ * Backlighting code for PS2AVRGB boards (ATMEGA32A)
+ * Kenneth A. (github.com/krusli | krusli.me)
+ */
+
+#ifndef BACKLIGHT_CUSTOM_H
+#define BACKLIGHT_CUSTOM_H
+
+#include <avr/pgmspace.h>
+void b_led_init_ports(void);
+void b_led_set(uint8_t level);
+void b_led_task(void);
+void setPWM(uint16_t xValue);
+
+#endif  // BACKLIGHT_CUSTOM_H

keyboards/ymdk_np21/breathing_custom.h

@@ -0,0 +1,140 @@
+/**
+ * Breathing effect code for PS2AVRGB boards (ATMEGA32A)
+ * Works in conjunction with `backlight.c`.
+ *
+ * Code adapted from `quantum.c` to register with the existing TIMER1 overflow
+ * handler in `backlight.c` instead of setting up its own timer.
+ * Kenneth A. (github.com/krusli | krusli.me)
+ */
+
+#ifdef BACKLIGHT_ENABLE
+#ifdef BACKLIGHT_BREATHING
+
+#include "backlight_custom.h"
+
+#ifndef BREATHING_PERIOD
+#define BREATHING_PERIOD 6
+#endif
+
+#define breathing_min() do {breathing_counter = 0;} while (0)
+#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0)
+
+// TODO make this share code with quantum.c
+
+#define BREATHING_NO_HALT  0
+#define BREATHING_HALT_OFF 1
+#define BREATHING_HALT_ON  2
+#define BREATHING_STEPS 128
+
+static uint8_t breathing_period = BREATHING_PERIOD;
+static uint8_t breathing_halt = BREATHING_NO_HALT;
+static uint16_t breathing_counter = 0;
+
+static bool breathing = false;
+
+bool is_breathing(void) {
+  return breathing;
+}
+
+// See http://jared.geek.nz/2013/feb/linear-led-pwm
+static uint16_t cie_lightness(uint16_t v) {
+  if (v <= 5243) // if below 8% of max
+    return v / 9; // same as dividing by 900%
+  else {
+    uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare
+    // to get a useful result with integer division, we shift left in the expression above
+    // and revert what we've done again after squaring.
+    y = y * y * y >> 8;
+    if (y > 0xFFFFUL) // prevent overflow
+      return 0xFFFFU;
+    else
+      return (uint16_t) y;
+  }
+}
+
+void breathing_enable(void) {
+  breathing = true;
+  breathing_counter = 0;
+  breathing_halt = BREATHING_NO_HALT;
+  // interrupt already registered
+}
+
+void breathing_pulse(void) {
+  if (get_backlight_level() == 0)
+    breathing_min();
+  else
+    breathing_max();
+  breathing_halt = BREATHING_HALT_ON;
+  // breathing_interrupt_enable();
+  breathing = true;
+}
+
+void breathing_disable(void) {
+  breathing = false;
+  // backlight_set(get_backlight_level());
+  b_led_set(get_backlight_level()); // custom implementation of backlight_set()
+}
+
+void breathing_self_disable(void)
+{
+  if (get_backlight_level() == 0)
+    breathing_halt = BREATHING_HALT_OFF;
+  else
+    breathing_halt = BREATHING_HALT_ON;
+}
+
+void breathing_toggle(void) {
+  if (is_breathing())
+    breathing_disable();
+  else
+    breathing_enable();
+}
+
+void breathing_period_set(uint8_t value)
+{
+  if (!value)
+    value = 1;
+  breathing_period = value;
+}
+
+void breathing_period_default(void) {
+  breathing_period_set(BREATHING_PERIOD);
+}
+
+void breathing_period_inc(void)
+{
+  breathing_period_set(breathing_period+1);
+}
+
+void breathing_period_dec(void)
+{
+  breathing_period_set(breathing_period-1);
+}
+
+/* To generate breathing curve in python:
+ * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
+ */
+static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+
+// Use this before the cie_lightness function.
+static inline uint16_t scale_backlight(uint16_t v) {
+  return v / BACKLIGHT_LEVELS * get_backlight_level();
+}
+
+void custom_breathing_handler(void) {
+  uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS;
+  // resetting after one period to prevent ugly reset at overflow.
+  breathing_counter = (breathing_counter + 1) % (breathing_period * 244);
+  uint8_t index = breathing_counter / interval % BREATHING_STEPS;
+
+  if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) ||
+      ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1)))
+  {
+      // breathing_interrupt_disable();
+  }
+
+  setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U)));
+}
+
+#endif // BACKLIGHT_BREATHING
+#endif  // BACKLIGHT_ENABLE

keyboards/ymdk_np21/config.h

@@ -0,0 +1,54 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config_common.h"
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#define VENDOR_ID       0x20A0
+#define PRODUCT_ID      0x422D
+// TODO: share these strings with usbconfig.h
+// Edit usbconfig.h to change these.
+#define MANUFACTURER    ymdk
+#define PRODUCT         np21
+
+/* matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 15
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_LEVELS 12
+// #define BACKLIGHT_BREATHING  // works, but BL_TOGG might not work
+
+#define TAPPING_TOGGLE 3
+
+#define NO_UART 1
+
+/* RGB underglow */
+// The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards.
+// The same pin is used on the JJ40, at least.
+#define RGBLED_NUM 5
+#define RGB_DI_PIN E2 // NOTE: for PS2AVRGB boards, underglow commands are sent via I2C to 0xB0.
+#define RGBLIGHT_ANIMATIONS
+
+/* key combination for command */
+#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+#endif

keyboards/ymdk_np21/i2c.c

@@ -0,0 +1,104 @@
+/*
+Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include <util/twi.h>
+
+#include "i2c.h"
+
+void i2c_set_bitrate(uint16_t bitrate_khz) {
+    uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
+    if (bitrate_div >= 16) {
+        bitrate_div = (bitrate_div - 16) / 2;
+    }
+    TWBR = bitrate_div;
+}
+
+void i2c_init(void) {
+    // set pull-up resistors on I2C bus pins
+    PORTC |= 0b11;
+
+    i2c_set_bitrate(400);
+
+    // enable TWI (two-wire interface)
+    TWCR |= (1 << TWEN);
+
+    // enable TWI interrupt and slave address ACK
+    TWCR |= (1 << TWIE);
+    TWCR |= (1 << TWEA);
+}
+
+uint8_t i2c_start(uint8_t address) {
+    // reset TWI control register
+    TWCR = 0;
+
+    // begin transmission and wait for it to end
+    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
+    while (!(TWCR & (1<<TWINT)));
+
+    // check if the start condition was successfully transmitted
+    if ((TWSR & 0xF8) != TW_START) {
+        return 1;
+    }
+
+    // transmit address and wait
+    TWDR = address;
+    TWCR = (1<<TWINT) | (1<<TWEN);
+    while (!(TWCR & (1<<TWINT)));
+
+    // check if the device has acknowledged the READ / WRITE mode
+    uint8_t twst = TW_STATUS & 0xF8;
+    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
+        return 1;
+    }
+
+    return 0;
+}
+
+void i2c_stop(void) {
+    TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+}
+
+uint8_t i2c_write(uint8_t data) {
+    TWDR = data;
+
+    // transmit data and wait
+    TWCR = (1<<TWINT) | (1<<TWEN);
+    while (!(TWCR & (1<<TWINT)));
+
+    if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
+        return 1;
+    }
+
+    return 0;
+}
+
+uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
+    if (i2c_start(address)) {
+        return 1;
+    }
+
+    for (uint16_t i = 0; i < length; i++) {
+        if (i2c_write(data[i])) {
+            return 1;
+        }
+    }
+
+    i2c_stop();
+
+    return 0;
+}

keyboards/ymdk_np21/i2c.h

@@ -0,0 +1,25 @@
+/*
+Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef __I2C_H__
+#define __I2C_H__
+
+void i2c_init(void);
+void i2c_set_bitrate(uint16_t bitrate_khz);
+uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
+
+#endif

keyboards/ymdk_np21/keymaps/default/keymap.c

@@ -0,0 +1,47 @@
+#include "ymdk_np21.h"
+#include "action_layer.h"
+
+#define _NP 0
+#define _BL  1
+
+enum custom_keycodes {
+  NP = SAFE_RANGE,
+  BL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Qwerty
+ * ,-----------------------------------------.
+ * |   0  |   1  |   4  |   7  | NUM  | ESC  |
+ * |------+------+------+------+------+------|
+ * |   .  |   2  |   5  |   8  |   /  | TAB  |---,
+ * |------+------+------+------+------+------|USB|
+ * |  DOT |   3  |   6  |   9  |   *  | BS   |---'
+ * |------+------+------+------+------+------|
+ * | Enter| Enter|   +  |   +  |   -  | FN   |
+ * `-----------------------------------------'
+ */
+[_NP] = KEYMAP( \
+  KC_KP_0,     KC_KP_1,     KC_KP_4,    KC_KP_7,    KC_NUMLOCK,     KC_ESC,    \
+  KC_DOT,      KC_KP_2,     KC_KP_5,    KC_KP_8,    KC_KP_SLASH,    KC_TAB,    \
+  KC_KP_DOT,   KC_KP_3,     KC_KP_6,    KC_KP_9,    KC_KP_ASTERISK, KC_BSPACE, \
+  KC_KP_ENTER, KC_KP_ENTER, KC_KP_PLUS, KC_KP_PLUS, KC_KP_MINUS,    MO(_BL)     \
+),
+/* Qwerty
+ * ,---------------------------------------------.
+ * | BL_BRTG |        |         |        |   |   |
+ * |---------+--------+---------+--------+---+---|
+ * |         | BL_OFF | BL_TOGG | BL_ON  |   |   |---,
+ * |---------+--------+---------+--------+---+---|USB|
+ * |         |        |         |        |   |   |---'
+ * |---------+--------+---------+--------+---+---|
+ * | BL_DEC  | BL_DEC | BL_INC  | BL_INC |   |   |
+ * `---------------------------------------------'
+ */
+[_BL] = KEYMAP( \
+  BL_BRTG, _______, _______, _______, _______, _______, \
+  _______, BL_OFF,  BL_TOGG, BL_ON,   _______, _______, \
+  _______, _______, _______, _______, _______, _______, \
+  BL_DEC,  BL_DEC,  BL_INC,  BL_INC,  _______, _______  \
+)
+};

keyboards/ymdk_np21/matrix.c

@@ -0,0 +1,118 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include <util/delay.h>
+
+#include "matrix.h"
+
+#ifndef DEBOUNCE
+#   define DEBOUNCE	5
+#endif
+
+static uint8_t debouncing = DEBOUNCE;
+
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+void matrix_set_row_status(uint8_t row);
+uint8_t bit_reverse(uint8_t x);
+
+void matrix_init(void) {
+    // all outputs for rows high
+    DDRB = 0xFF;
+    PORTB = 0xFF;
+    // all inputs for columns
+    DDRA = 0x00;
+    DDRC &= ~(0x111111<<2);
+    DDRD &= ~(1<<PIND7);
+    // all columns are pulled-up
+    PORTA = 0xFF;
+    PORTC |= (0b111111<<2);
+    PORTD |= (1<<PIND7);
+
+    // initialize matrix state: all keys off
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        matrix[row] = 0x00;
+        matrix_debouncing[row] = 0x00;
+    }
+
+    matrix_init_quantum();  // missing from original port by Luiz
+}
+
+uint8_t matrix_scan(void) {
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        matrix_set_row_status(row);
+        _delay_us(5);
+
+        matrix_row_t cols = (
+            // cols 0..7, PORTA 0 -> 7
+            (~PINA) & 0xFF
+        ) | (
+            // cols 8..13, PORTC 7 -> 0
+            bit_reverse((~PINC) & 0xFF) << 8
+        ) | (
+            // col 14, PORTD 7
+            ((~PIND) & (1 << PIND7)) << 7
+        );
+
+        if (matrix_debouncing[row] != cols) {
+            matrix_debouncing[row] = cols;
+            debouncing = DEBOUNCE;
+        }
+    }
+
+    if (debouncing) {
+        if (--debouncing) {
+            _delay_ms(1);
+        } else {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+        }
+    }
+
+    matrix_scan_quantum();  // also missing in original PS2AVRGB implementation
+
+    return 1;
+}
+
+void matrix_scan_kb(void) {
+  // Looping keyboard code goes here
+  // This runs every cycle (a lot)
+  matrix_scan_user();
+};
+
+// declarations
+void matrix_set_row_status(uint8_t row) {
+    DDRB = (1 << row);
+    PORTB = ~(1 << row);
+}
+
+uint8_t bit_reverse(uint8_t x) {
+    x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa);
+    x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc);
+    x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0);
+    return x;
+}
+
+inline matrix_row_t matrix_get_row(uint8_t row) {
+    return matrix[row];
+}
+
+void matrix_print(void) {
+}

keyboards/ymdk_np21/rules.mk

@@ -0,0 +1,59 @@
+# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# MCU name
+MCU = atmega32a
+PROTOCOL = VUSB
+
+# unsupported features for now
+NO_UART = yes
+NO_SUSPEND_POWER_DOWN = yes
+
+# processor frequency
+F_CPU = 12000000
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = bootloadHID
+
+# build options
+BOOTMAGIC_ENABLE = no
+MOUSEKEY_ENABLE = no
+EXTRAKEY_ENABLE = yes
+CONSOLE_ENABLE = no
+COMMAND_ENABLE = yes
+
+BACKLIGHT_ENABLE = yes
+BACKLIGHT_CUSTOM_DRIVER = yes
+
+RGBLIGHT_ENABLE = yes
+RGBLIGHT_CUSTOM_DRIVER = yes
+# DISABLE_WS2812 = no
+
+KEY_LOCK_ENABLE = yes
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+OPT_DEFS = -DDEBUG_LEVEL=0
+
+# custom matrix setup
+CUSTOM_MATRIX = yes
+SRC = matrix.c i2c.c backlight.c
+
+# programming options
+PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex

keyboards/ymdk_np21/usbconfig.h

@@ -0,0 +1,397 @@
+/* Name: usbconfig.h
+ * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
+ * Author: Christian Starkjohann
+ * Creation Date: 2005-04-01
+ * Tabsize: 4
+ * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
+ */
+
+#ifndef __usbconfig_h_included__
+#define __usbconfig_h_included__
+
+#include "config.h"
+
+/*
+General Description:
+This file is an example configuration (with inline documentation) for the USB
+driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
+also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
+wire the lines to any other port, as long as D+ is also wired to INT0 (or any
+other hardware interrupt, as long as it is the highest level interrupt, see
+section at the end of this file).
+*/
+
+/* ---------------------------- Hardware Config ---------------------------- */
+
+#define USB_CFG_IOPORTNAME      D
+/* This is the port where the USB bus is connected. When you configure it to
+ * "B", the registers PORTB, PINB and DDRB will be used.
+ */
+#define USB_CFG_DMINUS_BIT      3
+/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
+ * This may be any bit in the port.
+ */
+#define USB_CFG_DPLUS_BIT       2
+/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
+ * This may be any bit in the port. Please note that D+ must also be connected
+ * to interrupt pin INT0! [You can also use other interrupts, see section
+ * "Optional MCU Description" below, or you can connect D- to the interrupt, as
+ * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
+ * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
+ * markers every millisecond.]
+ */
+#define USB_CFG_CLOCK_KHZ       (F_CPU/1000)
+/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
+ * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
+ * require no crystal, they tolerate +/- 1% deviation from the nominal
+ * frequency. All other rates require a precision of 2000 ppm and thus a
+ * crystal!
+ * Since F_CPU should be defined to your actual clock rate anyway, you should
+ * not need to modify this setting.
+ */
+#define USB_CFG_CHECK_CRC       0
+/* Define this to 1 if you want that the driver checks integrity of incoming
+ * data packets (CRC checks). CRC checks cost quite a bit of code size and are
+ * currently only available for 18 MHz crystal clock. You must choose
+ * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
+ */
+
+/* ----------------------- Optional Hardware Config ------------------------ */
+
+/* #define USB_CFG_PULLUP_IOPORTNAME   D */
+/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
+ * V+, you can connect and disconnect the device from firmware by calling
+ * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
+ * This constant defines the port on which the pullup resistor is connected.
+ */
+/* #define USB_CFG_PULLUP_BIT          4 */
+/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
+ * above) where the 1.5k pullup resistor is connected. See description
+ * above for details.
+ */
+
+/* --------------------------- Functional Range ---------------------------- */
+
+#define USB_CFG_HAVE_INTRIN_ENDPOINT    1
+/* Define this to 1 if you want to compile a version with two endpoints: The
+ * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
+ * number).
+ */
+#define USB_CFG_HAVE_INTRIN_ENDPOINT3   1
+/* Define this to 1 if you want to compile a version with three endpoints: The
+ * default control endpoint 0, an interrupt-in endpoint 3 (or the number
+ * configured below) and a catch-all default interrupt-in endpoint as above.
+ * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
+ */
+#define USB_CFG_EP3_NUMBER              3
+/* If the so-called endpoint 3 is used, it can now be configured to any other
+ * endpoint number (except 0) with this macro. Default if undefined is 3.
+ */
+/* #define USB_INITIAL_DATATOKEN           USBPID_DATA1 */
+/* The above macro defines the startup condition for data toggling on the
+ * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
+ * Since the token is toggled BEFORE sending any data, the first packet is
+ * sent with the oposite value of this configuration!
+ */
+#define USB_CFG_IMPLEMENT_HALT          0
+/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
+ * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
+ * it is required by the standard. We have made it a config option because it
+ * bloats the code considerably.
+ */
+#define USB_CFG_SUPPRESS_INTR_CODE      0
+/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
+ * want to send any data over them. If this macro is defined to 1, functions
+ * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
+ * you need the interrupt-in endpoints in order to comply to an interface
+ * (e.g. HID), but never want to send any data. This option saves a couple
+ * of bytes in flash memory and the transmit buffers in RAM.
+ */
+#define USB_CFG_INTR_POLL_INTERVAL      1
+/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
+ * interval. The value is in milliseconds and must not be less than 10 ms for
+ * low speed devices.
+ */
+#define USB_CFG_IS_SELF_POWERED         0
+/* Define this to 1 if the device has its own power supply. Set it to 0 if the
+ * device is powered from the USB bus.
+ */
+// max power draw with maxed white underglow measured at 120 mA (peaks)
+#define USB_CFG_MAX_BUS_POWER           100
+/* Set this variable to the maximum USB bus power consumption of your device.
+ * The value is in milliamperes. [It will be divided by two since USB
+ * communicates power requirements in units of 2 mA.]
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITE      1
+/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
+ * transfers. Set it to 0 if you don't need it and want to save a couple of
+ * bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_READ       0
+/* Set this to 1 if you need to send control replies which are generated
+ * "on the fly" when usbFunctionRead() is called. If you only want to send
+ * data from a static buffer, set it to 0 and return the data from
+ * usbFunctionSetup(). This saves a couple of bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITEOUT   0
+/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
+ * You must implement the function usbFunctionWriteOut() which receives all
+ * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
+ * can be found in 'usbRxToken'.
+ */
+#define USB_CFG_HAVE_FLOWCONTROL        0
+/* Define this to 1 if you want flowcontrol over USB data. See the definition
+ * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
+ * usbdrv.h.
+ */
+#define USB_CFG_DRIVER_FLASH_PAGE       0
+/* If the device has more than 64 kBytes of flash, define this to the 64 k page
+ * where the driver's constants (descriptors) are located. Or in other words:
+ * Define this to 1 for boot loaders on the ATMega128.
+ */
+#define USB_CFG_LONG_TRANSFERS          0
+/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
+ * in a single control-in or control-out transfer. Note that the capability
+ * for long transfers increases the driver size.
+ */
+/* #define USB_RX_USER_HOOK(data, len)     if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
+/* This macro is a hook if you want to do unconventional things. If it is
+ * defined, it's inserted at the beginning of received message processing.
+ * If you eat the received message and don't want default processing to
+ * proceed, do a return after doing your things. One possible application
+ * (besides debugging) is to flash a status LED on each packet.
+ */
+/* #define USB_RESET_HOOK(resetStarts)     if(!resetStarts){hadUsbReset();} */
+/* This macro is a hook if you need to know when an USB RESET occurs. It has
+ * one parameter which distinguishes between the start of RESET state and its
+ * end.
+ */
+/* #define USB_SET_ADDRESS_HOOK()              hadAddressAssigned(); */
+/* This macro (if defined) is executed when a USB SET_ADDRESS request was
+ * received.
+ */
+#define USB_COUNT_SOF                   1
+/* define this macro to 1 if you need the global variable "usbSofCount" which
+ * counts SOF packets. This feature requires that the hardware interrupt is
+ * connected to D- instead of D+.
+ */
+/* #ifdef __ASSEMBLER__
+ * macro myAssemblerMacro
+ *     in      YL, TCNT0
+ *     sts     timer0Snapshot, YL
+ *     endm
+ * #endif
+ * #define USB_SOF_HOOK                    myAssemblerMacro
+ * This macro (if defined) is executed in the assembler module when a
+ * Start Of Frame condition is detected. It is recommended to define it to
+ * the name of an assembler macro which is defined here as well so that more
+ * than one assembler instruction can be used. The macro may use the register
+ * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
+ * immediately after an SOF pulse may be lost and must be retried by the host.
+ * What can you do with this hook? Since the SOF signal occurs exactly every
+ * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
+ * designs running on the internal RC oscillator.
+ * Please note that Start Of Frame detection works only if D- is wired to the
+ * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
+ */
+#define USB_CFG_CHECK_DATA_TOGGLING     0
+/* define this macro to 1 if you want to filter out duplicate data packets
+ * sent by the host. Duplicates occur only as a consequence of communication
+ * errors, when the host does not receive an ACK. Please note that you need to
+ * implement the filtering yourself in usbFunctionWriteOut() and
+ * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
+ * for each control- and out-endpoint to check for duplicate packets.
+ */
+#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   0
+/* define this macro to 1 if you want the function usbMeasureFrameLength()
+ * compiled in. This function can be used to calibrate the AVR's RC oscillator.
+ */
+#define USB_USE_FAST_CRC                0
+/* The assembler module has two implementations for the CRC algorithm. One is
+ * faster, the other is smaller. This CRC routine is only used for transmitted
+ * messages where timing is not critical. The faster routine needs 31 cycles
+ * per byte while the smaller one needs 61 to 69 cycles. The faster routine
+ * may be worth the 32 bytes bigger code size if you transmit lots of data and
+ * run the AVR close to its limit.
+ */
+
+/* -------------------------- Device Description --------------------------- */
+
+#define USB_CFG_VENDOR_ID       (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
+/* USB vendor ID for the device, low byte first. If you have registered your
+ * own Vendor ID, define it here. Otherwise you may use one of obdev's free
+ * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_ID       (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
+/* This is the ID of the product, low byte first. It is interpreted in the
+ * scope of the vendor ID. If you have registered your own VID with usb.org
+ * or if you have licensed a PID from somebody else, define it here. Otherwise
+ * you may use one of obdev's free shared VID/PID pairs. See the file
+ * USB-IDs-for-free.txt for details!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_VERSION  0x00, 0x02
+/* Version number of the device: Minor number first, then major number.
+ */
+#define USB_CFG_VENDOR_NAME     'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
+#define USB_CFG_VENDOR_NAME_LEN 13
+/* These two values define the vendor name returned by the USB device. The name
+ * must be given as a list of characters under single quotes. The characters
+ * are interpreted as Unicode (UTF-16) entities.
+ * If you don't want a vendor name string, undefine these macros.
+ * ALWAYS define a vendor name containing your Internet domain name if you use
+ * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
+ * details.
+ */
+#define USB_CFG_DEVICE_NAME     'j', 'j', '4', '0'
+#define USB_CFG_DEVICE_NAME_LEN 4
+/* Same as above for the device name. If you don't want a device name, undefine
+ * the macros. See the file USB-IDs-for-free.txt before you assign a name if
+ * you use a shared VID/PID.
+ */
+/*#define USB_CFG_SERIAL_NUMBER   'N', 'o', 'n', 'e' */
+/*#define USB_CFG_SERIAL_NUMBER_LEN   0 */
+/* Same as above for the serial number. If you don't want a serial number,
+ * undefine the macros.
+ * It may be useful to provide the serial number through other means than at
+ * compile time. See the section about descriptor properties below for how
+ * to fine tune control over USB descriptors such as the string descriptor
+ * for the serial number.
+ */
+#define USB_CFG_DEVICE_CLASS        0
+#define USB_CFG_DEVICE_SUBCLASS     0
+/* See USB specification if you want to conform to an existing device class.
+ * Class 0xff is "vendor specific".
+ */
+#define USB_CFG_INTERFACE_CLASS     3   /* HID */
+#define USB_CFG_INTERFACE_SUBCLASS  1   /* Boot */
+#define USB_CFG_INTERFACE_PROTOCOL  1   /* Keyboard */
+/* See USB specification if you want to conform to an existing device class or
+ * protocol. The following classes must be set at interface level:
+ * HID class is 3, no subclass and protocol required (but may be useful!)
+ * CDC class is 2, use subclass 2 and protocol 1 for ACM
+ */
+#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH    0
+/* Define this to the length of the HID report descriptor, if you implement
+ * an HID device. Otherwise don't define it or define it to 0.
+ * If you use this define, you must add a PROGMEM character array named
+ * "usbHidReportDescriptor" to your code which contains the report descriptor.
+ * Don't forget to keep the array and this define in sync!
+ */
+
+/* #define USB_PUBLIC static */
+/* Use the define above if you #include usbdrv.c instead of linking against it.
+ * This technique saves a couple of bytes in flash memory.
+ */
+
+/* ------------------- Fine Control over USB Descriptors ------------------- */
+/* If you don't want to use the driver's default USB descriptors, you can
+ * provide our own. These can be provided as (1) fixed length static data in
+ * flash memory, (2) fixed length static data in RAM or (3) dynamically at
+ * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
+ * information about this function.
+ * Descriptor handling is configured through the descriptor's properties. If
+ * no properties are defined or if they are 0, the default descriptor is used.
+ * Possible properties are:
+ *   + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
+ *     at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
+ *     used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
+ *     you want RAM pointers.
+ *   + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
+ *     in static memory is in RAM, not in flash memory.
+ *   + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
+ *     the driver must know the descriptor's length. The descriptor itself is
+ *     found at the address of a well known identifier (see below).
+ * List of static descriptor names (must be declared PROGMEM if in flash):
+ *   char usbDescriptorDevice[];
+ *   char usbDescriptorConfiguration[];
+ *   char usbDescriptorHidReport[];
+ *   char usbDescriptorString0[];
+ *   int usbDescriptorStringVendor[];
+ *   int usbDescriptorStringDevice[];
+ *   int usbDescriptorStringSerialNumber[];
+ * Other descriptors can't be provided statically, they must be provided
+ * dynamically at runtime.
+ *
+ * Descriptor properties are or-ed or added together, e.g.:
+ * #define USB_CFG_DESCR_PROPS_DEVICE   (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
+ *
+ * The following descriptors are defined:
+ *   USB_CFG_DESCR_PROPS_DEVICE
+ *   USB_CFG_DESCR_PROPS_CONFIGURATION
+ *   USB_CFG_DESCR_PROPS_STRINGS
+ *   USB_CFG_DESCR_PROPS_STRING_0
+ *   USB_CFG_DESCR_PROPS_STRING_VENDOR
+ *   USB_CFG_DESCR_PROPS_STRING_PRODUCT
+ *   USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
+ *   USB_CFG_DESCR_PROPS_HID
+ *   USB_CFG_DESCR_PROPS_HID_REPORT
+ *   USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
+ *
+ * Note about string descriptors: String descriptors are not just strings, they
+ * are Unicode strings prefixed with a 2 byte header. Example:
+ * int  serialNumberDescriptor[] = {
+ *     USB_STRING_DESCRIPTOR_HEADER(6),
+ *     'S', 'e', 'r', 'i', 'a', 'l'
+ * };
+ */
+
+#define USB_CFG_DESCR_PROPS_DEVICE                  0
+#define USB_CFG_DESCR_PROPS_CONFIGURATION           USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_CONFIGURATION           0
+#define USB_CFG_DESCR_PROPS_STRINGS                 0
+#define USB_CFG_DESCR_PROPS_STRING_0                0
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR           0
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT          0
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    0
+#define USB_CFG_DESCR_PROPS_HID                     USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID                     0
+#define USB_CFG_DESCR_PROPS_HID_REPORT              USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID_REPORT              0
+#define USB_CFG_DESCR_PROPS_UNKNOWN                 0
+
+#define usbMsgPtr_t unsigned short
+/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to
+ * a scalar type here because gcc generates slightly shorter code for scalar
+ * arithmetics than for pointer arithmetics. Remove this define for backward
+ * type compatibility or define it to an 8 bit type if you use data in RAM only
+ * and all RAM is below 256 bytes (tiny memory model in IAR CC).
+ */
+
+/* ----------------------- Optional MCU Description ------------------------ */
+
+/* The following configurations have working defaults in usbdrv.h. You
+ * usually don't need to set them explicitly. Only if you want to run
+ * the driver on a device which is not yet supported or with a compiler
+ * which is not fully supported (such as IAR C) or if you use a differnt
+ * interrupt than INT0, you may have to define some of these.
+ */
+/* #define USB_INTR_CFG            MCUCR */
+/* #define USB_INTR_CFG_SET        ((1 << ISC00) | (1 << ISC01)) */
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         GIMSK */
+/* #define USB_INTR_ENABLE_BIT     INT0 */
+/* #define USB_INTR_PENDING        GIFR */
+/* #define USB_INTR_PENDING_BIT    INTF0 */
+/* #define USB_INTR_VECTOR         INT0_vect */
+
+/* Set INT1 for D- falling edge to count SOF */
+/* #define USB_INTR_CFG            EICRA */
+#define USB_INTR_CFG_SET        ((1 << ISC11) | (0 << ISC10))
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         EIMSK */
+#define USB_INTR_ENABLE_BIT     INT1
+/* #define USB_INTR_PENDING        EIFR */
+#define USB_INTR_PENDING_BIT    INTF1
+#define USB_INTR_VECTOR         INT1_vect
+
+#endif /* __usbconfig_h_included__ */

keyboards/ymdk_np21/ymdk_np21.c

@@ -0,0 +1,80 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+Modified 2018 Kenneth A. <github.com/krusli>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "ymdk_np21.h"
+
+#include <avr/pgmspace.h>
+
+#include "action_layer.h"
+#include "quantum.h"
+
+#include "i2c.h"
+
+#include "backlight.h"
+#include "backlight_custom.h"
+
+extern rgblight_config_t rgblight_config;
+
+// for keyboard subdirectory level init functions
+// @Override
+void matrix_init_kb(void) {
+  // call user level keymaps, if any
+  // matrix_init_user();
+}
+
+#ifdef BACKLIGHT_ENABLE
+/// Overrides functions in `quantum.c`
+void backlight_init_ports(void) {
+  b_led_init_ports();
+}
+
+void backlight_task(void) {
+  b_led_task();
+}
+
+void backlight_set(uint8_t level) {
+  b_led_set(level);
+}
+#endif
+
+// custom RGB driver
+void rgblight_set(void) {
+  if (!rgblight_config.enable) {
+    for (uint8_t i=0; i<RGBLED_NUM; i++) {
+      led[i].r = 0;
+      led[i].g = 0;
+      led[i].b = 0;
+    }
+  }
+
+  i2c_init();
+  i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
+}
+
+bool rgb_init = false;
+void matrix_scan_user(void) {
+  // if LEDs were previously on before poweroff, turn them back on
+  if (rgb_init == false && rgblight_config.enable) {
+    i2c_init();
+    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
+    rgb_init = true;
+  }
+
+  rgblight_task();
+  /* Nothing else for now. */
+}

keyboards/ymdk_np21/ymdk_np21.h

@@ -0,0 +1,43 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef KEYMAP_COMMON_H
+#define KEYMAP_COMMON_H
+
+#include "quantum.h"
+#include "quantum_keycodes.h"
+#include "keycode.h"
+#include "action.h"
+
+void matrix_init_user(void);  // TODO port this to other PS2AVRGB boards
+
+#define KEYMAP_GRID( \
+    K01, K02, K03, K04, K05, K06, \
+    K11, K12, K13, K14, K15, K16, \
+    K21, K22, K23, K24, K25, K26, \
+    K31, K32, K33, K34, K35, K36 \
+) \
+{ \
+  { K06, K05, K04, K03, K02, K01 }, \
+  { K16, K15, K14, K13, K12, K11 }, \
+  { K26, K25, K24, K23, K22, K21 }, \
+  { K36, K35, K34, K33, K32, K31 }  \
+}
+
+#define KEYMAP KEYMAP_GRID
+
+#endif

quantum/audio/song_list.h

@@ -53,6 +53,12 @@
     E__NOTE(_CS4), E__NOTE(_B4),  QD_NOTE(_AS4), \
     E__NOTE(_AS4), E__NOTE(_AS4), QD_NOTE(_B4),
 
+#define IMPERIAL_MARCH \
+  HD_NOTE(_A4), HD_NOTE(_A4), HD_NOTE(_A4), QD_NOTE(_F4), QD_NOTE(_C5), \
+  HD_NOTE(_A4), QD_NOTE(_F4),  QD_NOTE(_C5), WD_NOTE(_A4), \
+  HD_NOTE(_E5), HD_NOTE(_E5), HD_NOTE(_E5), QD_NOTE(_F5), QD_NOTE(_C5), \
+  HD_NOTE(_A4), QD_NOTE(_F4),  QD_NOTE(_C5), WD_NOTE(_A4)
+
 #define CLUEBOARD_SOUND \
     HD_NOTE(_C3), HD_NOTE(_D3), HD_NOTE(_E3), HD_NOTE(_F3), HD_NOTE(_G3), HD_NOTE(_A4), HD_NOTE(_B4), HD_NOTE(_C4)
 /*

quantum/quantum.c

@@ -904,7 +904,7 @@ void backlight_task(void) {
       _SFR_IO8((backlight_pin >> 4) + 2) &= ~_BV(backlight_pin & 0xF);
     #endif
   }
-  backlight_tick = backlight_tick + 1 % 16;
+  backlight_tick = (backlight_tick + 1) % 16;
 }
 #endif