make custom keycodes actually work

Co-authored-by: Ryan <fauxpark@gmail.com>

.github/labeler.yml

@@ -22,7 +22,6 @@ keymap:
 via:
   - keyboards/**/keymaps/via/*
 cli:
-  - bin/qmk
   - requirements.txt
   - lib/python/**/*
 python:

.github/workflows/api.yml

@@ -12,7 +12,7 @@ on:
 jobs:
   api_data:
     runs-on: ubuntu-latest
-    container: qmkfm/base_container
+    container: qmkfm/qmk_cli
 
     # protect against those who develop with their fork on master
     if: github.repository == 'qmk/qmk_firmware'

.github/workflows/cli.yml

@@ -8,7 +8,6 @@ on:
   pull_request:
     paths:
     - 'lib/python/**'
-    - 'bin/qmk'
     - 'requirements.txt'
     - '.github/workflows/cli.yml'
 
@@ -16,7 +15,7 @@ jobs:
   test:
     runs-on: ubuntu-latest
 
-    container: qmkfm/base_container
+    container: qmkfm/qmk_cli
 
     steps:
     - uses: actions/checkout@v2
@@ -25,4 +24,4 @@ jobs:
     - name: Install dependencies
       run: pip3 install -r requirements-dev.txt
     - name: Run tests
-      run: bin/qmk pytest
+      run: qmk pytest

.github/workflows/develop_api.yml

@@ -12,7 +12,7 @@ on:
 jobs:
   api_data:
     runs-on: ubuntu-latest
-    container: qmkfm/base_container
+    container: qmkfm/qmk_cli
 
     # protect against those who work in their fork on develop
     if: github.repository == 'qmk/qmk_firmware'

.github/workflows/docs.yml

@@ -14,7 +14,7 @@ on:
 jobs:
   generate:
     runs-on: ubuntu-latest
-    container: qmkfm/base_container
+    container: qmkfm/qmk_cli
 
     # protect against those who develop with their fork on master
     if: github.repository == 'qmk/qmk_firmware'

.github/workflows/format.yaml

@@ -16,7 +16,7 @@ jobs:
   lint:
     runs-on: ubuntu-latest
 
-    container: qmkfm/base_container
+    container: qmkfm/qmk_cli
 
     steps:
     - uses: rlespinasse/github-slug-action@v3.x

.github/workflows/lint.yml

@@ -9,7 +9,7 @@ jobs:
   lint:
     runs-on: ubuntu-latest
 
-    container: qmkfm/base_container
+    container: qmkfm/qmk_cli
 
     steps:
     - uses: actions/checkout@v2

Dockerfile

@@ -1,7 +1,6 @@
-FROM qmkfm/base_container
+FROM qmkfm/qmk_cli
 
 VOLUME /qmk_firmware
 WORKDIR /qmk_firmware
-COPY . .
 
-CMD make all:default
+CMD qmk compile -kb all -km default

Makefile

@@ -30,11 +30,7 @@ endif
 endif
 
 # Determine which qmk cli to use
-ifeq (,$(shell which qmk))
+QMK_BIN := qmk
-    QMK_BIN = bin/qmk
-else
-    QMK_BIN = qmk
-endif
 
 # avoid 'Entering|Leaving directory' messages
 MAKEFLAGS += --no-print-directory

Vagrantfile

@@ -68,13 +68,13 @@ Vagrant.configure(2) do |config|
   ["virtualbox", "vmware_workstation", "vmware_fusion"].each do |type|
     config.vm.provider type do |virt, override|
       override.vm.provision "docker" do |d|
-        d.run "qmkfm/base_container",
+        d.run "qmkfm/qmk_cli",
           cmd: "tail -f /dev/null",
           args: "--privileged -v /dev:/dev -v '/vagrant:/vagrant'"
       end
 
       override.vm.provision "shell", inline: <<-SHELL
-        echo 'docker restart qmkfm-base_container && exec docker exec -it qmkfm-base_container /bin/bash -l' >> ~vagrant/.bashrc
+        echo 'docker restart qmkfm-qmk_cli && exec docker exec -it qmkfm-qmk_cli /bin/bash -l' >> ~vagrant/.bashrc
       SHELL
     end
   end

bin/qmk

@@ -1,58 +0,0 @@
-#!/usr/bin/env python3
-"""CLI wrapper for running QMK commands.
-"""
-import os
-import sys
-from pathlib import Path
-
-# Add the QMK python libs to our path
-script_dir = Path(os.path.realpath(__file__)).parent
-qmk_dir = script_dir.parent
-python_lib_dir = Path(qmk_dir / 'lib' / 'python').resolve()
-sys.path.append(str(python_lib_dir))
-
-# Setup the CLI
-import milc  # noqa
-
-milc.EMOJI_LOGLEVELS['INFO'] = '{fg_blue}Ψ{style_reset_all}'
-
-
-@milc.cli.entrypoint('QMK Helper Script')
-def qmk_main(cli):
-    """The function that gets run when no subcommand is provided.
-    """
-    cli.print_help()
-
-
-def main():
-    """Setup our environment and then call the CLI entrypoint.
-    """
-    # Change to the root of our checkout
-    os.environ['ORIG_CWD'] = os.getcwd()
-    os.environ['DEPRECATED_BIN_QMK'] = '1'
-    os.chdir(qmk_dir)
-
-    print('Warning: The bin/qmk script is being deprecated. Please install the QMK CLI: python3 -m pip install qmk', file=sys.stderr)
-
-    # Import the subcommands
-    import milc.subcommand.config  # noqa
-    import qmk.cli  # noqa
-
-    # Execute
-    return_code = milc.cli()
-
-    if return_code is False:
-        exit(1)
-
-    elif return_code is not True and isinstance(return_code, int):
-        if return_code < 0 or return_code > 255:
-            milc.cli.log.error('Invalid return_code: %d', return_code)
-            exit(255)
-
-        exit(return_code)
-
-    exit(0)
-
-
-if __name__ == '__main__':
-    main()

build_keyboard.mk

@@ -115,6 +115,7 @@ include $(INFO_RULES_MK)
 # Check for keymap.json first, so we can regenerate keymap.c
 include build_json.mk
 
+# Pull in keymap level rules.mk
 ifeq ("$(wildcard $(KEYMAP_PATH))", "")
     # Look through the possible keymap folders until we find a matching keymap.c
     ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_5)/keymap.c)","")
@@ -345,6 +346,7 @@ ifeq ("$(USER_NAME)","")
 endif
 USER_PATH := users/$(USER_NAME)
 
+# Pull in user level rules.mk
 -include $(USER_PATH)/rules.mk
 ifneq ("$(wildcard $(USER_PATH)/config.h)","")
     CONFIG_H += $(USER_PATH)/config.h
@@ -356,6 +358,23 @@ endif
 # Disable features that a keyboard doesn't support
 -include disable_features.mk
 
+# Pull in post_rules.mk files from all our subfolders
+ifneq ("$(wildcard $(KEYBOARD_PATH_1)/post_rules.mk)","")
+    include $(KEYBOARD_PATH_1)/post_rules.mk
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_2)/post_rules.mk)","")
+    include $(KEYBOARD_PATH_2)/post_rules.mk
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_3)/post_rules.mk)","")
+    include $(KEYBOARD_PATH_3)/post_rules.mk
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_4)/post_rules.mk)","")
+    include $(KEYBOARD_PATH_4)/post_rules.mk
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_5)/post_rules.mk)","")
+    include $(KEYBOARD_PATH_5)/post_rules.mk
+endif
+
 ifneq ("$(wildcard $(KEYMAP_PATH)/config.h)","")
     CONFIG_H += $(KEYMAP_PATH)/config.h
 endif

common_features.mk

@@ -698,19 +698,23 @@ ifeq ($(strip $(AUTO_SHIFT_ENABLE)), yes)
 endif
 
 JOYSTICK_ENABLE ?= no
-ifneq ($(strip $(JOYSTICK_ENABLE)), no)
+VALID_JOYSTICK_TYPES := analog digital
+JOYSTICK_DRIVER ?= analog
+ifeq ($(strip $(JOYSTICK_ENABLE)), yes)
+    ifeq ($(filter $(JOYSTICK_DRIVER),$(VALID_JOYSTICK_TYPES)),)
+        $(error "$(JOYSTICK_DRIVER)" is not a valid joystick driver)
+    endif
     OPT_DEFS += -DJOYSTICK_ENABLE
     SRC += $(QUANTUM_DIR)/process_keycode/process_joystick.c
     SRC += $(QUANTUM_DIR)/joystick.c
-endif
 
-ifeq ($(strip $(JOYSTICK_ENABLE)), analog)
+    ifeq ($(strip $(JOYSTICK_DRIVER)), analog)
         OPT_DEFS += -DANALOG_JOYSTICK_ENABLE
         SRC += analog.c
-endif
+    endif
-
+    ifeq ($(strip $(JOYSTICK_DRIVER)), digital)
-ifeq ($(strip $(JOYSTICK_ENABLE)), digital)
         OPT_DEFS += -DDIGITAL_JOYSTICK_ENABLE
+    endif
 endif
 
 DIGITIZER_ENABLE ?= no

data/schemas/definitions.jsonschema

@@ -12,6 +12,12 @@
         "minLength": 1,
         "pattern": "^[0-9a-z_]*$"
     },
+    "keycode": {
+        "type": "string",
+        "minLength": 1,
+        "maxLength": 250,
+        "pattern": "^[A-Z_][0-9A-Z_()]*$"
+    },
     "hex_number_2d": {
         "type": "string",
         "pattern": "^0x[0-9A-F]{2}$"

data/schemas/keyboard.jsonschema

@@ -77,6 +77,10 @@
                 "lto": {"type": "boolean"},
             }
         },
+        "custom_keycodes": {
+            "type": "array",
+            "items": {"$ref": "qmk.definitions.v1#/keycode"}
+        },
         "diode_direction": {
             "type": "string",
             "enum": ["COL2ROW", "ROW2COL"]

data/schemas/keymap.jsonschema

@@ -5,6 +5,11 @@
     "type": "object",
     "properties": {
         "author": {"type": "string"},
+        "config": {"$ref": "qmk.keyboard.v1"},
+        "custom_keycodes": {
+            "type": "array",
+            "items": {"$ref": "qmk.definitions.v1#/keycode"}
+        },
         "keyboard": {"$ref": "qmk.definitions.v1#/text_identifier"},
         "keymap": {"$ref": "qmk.definitions.v1#/text_identifier"},
         "layout": {"$ref": "qmk.definitions.v1#/layout_macro"},
@@ -12,10 +17,9 @@
             "type": "array",
             "items": {
                 "type": "array",
-                "items": {"type": "string"}
+                "items": {"$ref": "qmk.definitions.v1#/keycode"}
             }
         },
-        "config": {"$ref": "qmk.keyboard.v1"},
         "notes": {
             "type": "string",
             "description": "asdf"

docs/cli_commands.md

@@ -118,54 +118,6 @@ This command lets you configure the behavior of QMK. For the full `qmk config` d
 qmk config [-ro] [config_token1] [config_token2] [...] [config_tokenN]
 ```
 
-## `qmk console`
-
-This command lets you connect to keyboard consoles to get debugging messages. It only works if your keyboard firmware has been compiled with `CONSOLE_ENABLE=yes`.
-
-**Usage**:
-
-```
-qmk console [-d <pid>:<vid>[:<index>]] [-l] [-n] [-t] [-w <seconds>]
-```
-
-**Examples**:
-
-Connect to all available keyboards and show their console messages:
-
-```
-qmk console
-```
-
-List all devices:
-
-```
-qmk console -l
-```
-
-Show only messages from clueboard/66/rev3 keyboards:
-
-```
-qmk console -d C1ED:2370
-```
-
-Show only messages from the second clueboard/66/rev3:
-
-```
-qmk console -d C1ED:2370:2
-```
-
-Show timestamps and VID:PID instead of names:
-
-```
-qmk console -n -t
-```
-
-Disable bootloader messages:
-
-```
-qmk console --no-bootloaders
-```
-
 ## `qmk doctor`
 
 This command examines your environment and alerts you to potential build or flash problems. It can fix many of them if you want it to.

docs/contributing.md

@@ -105,7 +105,7 @@ enum my_keycodes {
 
 Before opening a pull request, you can preview your changes if you have set up the development environment by running this command from the `qmk_firmware/` folder:
 
-    ./bin/qmk docs
+    qmk docs
 
 or if you only have Python 3 installed:
 

docs/de/cli.md

@@ -51,25 +51,6 @@ Wir suchen nach Freiwilligen, die ein `qmk`-Package für weitere Betriebssysteme
 * Installiere mit einem [virtualenv](https://virtualenv.pypa.io/en/latest/).
 * Weise den User an, die Umgebungs-Variable `QMK_HOME` zu setzen, um die Firmware-Quelle anders einzustellen als `~/qmk_firmware`.
 
-# Lokale CLI
-
-Wenn Du die globale CLI nicht verwenden möchtest, beinhaltet `qmk_firmware` auch eine lokale CLI. Du kannst sie hier finden: `qmk_firmware/bin/qmk`. Du kannst den `qmk`-Befehl aus irgendeinem Datei-Verzeichnis ausführen und es wird immer auf dieser Kopie von `qmk_firmware` arbeiten.
-
-**Beispiel**:
-
-```
-$ ~/qmk_firmware/bin/qmk hello
-Ψ Hello, World!
-```
-
-## Einschränkungen der lokalen CLI
-
-Hier ein Vergleich mit der globalen CLI:
-
-* Die lokale CLI unterstützt kein `qmk setup` oder `qmk clone`.
-* Die lokale CLI arbeitet immer innerhalb der selben `qmk_firmware`-Verzeichnisstruktur, auch wenn Du mehrere Repositories geklont hast.
-* Die lokale CLI läuft nicht in einer virtualenv. Daher ist es möglich, dass Abhängigkeiten (dependencies) miteinander in Konflikt kommen/stehen.
-
 # CLI-Befehle
 
 ## `qmk compile`

docs/faq_keymap.md

@@ -5,7 +5,7 @@ This page covers questions people often have about keymaps. If you haven't you s
 ## What Keycodes Can I Use?
 See [Keycodes](keycodes.md) for an index of keycodes available to you. These link to more extensive documentation when available.
 
-Keycodes are actually defined in [common/keycode.h](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/keycode.h).
+Keycodes are actually defined in [quantum/keycode.h](https://github.com/qmk/qmk_firmware/blob/master/quantum/keycode.h).
 
 ## What Are the Default Keycodes?
 

docs/feature_joystick.md

@@ -2,8 +2,6 @@
 
 The keyboard can be made to be recognized as a joystick HID device by the operating system.
 
-This is enabled by adding `JOYSTICK_ENABLE` to `rules.mk`. You can set this value to `analog`, `digital`, or `no`.
-
 !> Joystick support is not currently available on V-USB devices.
 
 The joystick feature provides two services:
@@ -18,7 +16,8 @@ or send gamepad reports based on values computed by the keyboard.
 To use analog input you must first enable it in `rules.mk`:
 
 ```makefile
-JOYSTICK_ENABLE = analog
+JOYSTICK_ENABLE = yes
+JOYSTICK_DRIVER = analog # or 'digital'
 ```
 
 An analog device such as a potentiometer found on a gamepad's analog axes is based on a [voltage divider](https://en.wikipedia.org/wiki/Voltage_divider).

docs/feature_key_overrides.md

@@ -103,7 +103,7 @@ const key_override_t **key_overrides = (const key_override_t *[]){
 ```
 
 ### Flexible macOS-friendly Grave Escape
-The [Grave Escape feature](https://docs.qmk.fm/using-qmk/advanced-keycodes/feature_grave_esc) is limited in its configurability and has [bugs when used on macOS](https://docs.qmk.fm/using-qmk/advanced-keycodes/feature_grave_esc#caveats). Key overrides can be used to achieve a similar functionality as Grave Escape, but with more customization and without bugs on macOS.
+The [Grave Escape feature](feature_grave_esc.md) is limited in its configurability and has [bugs when used on macOS](feature_grave_esc.md#caveats). Key overrides can be used to achieve a similar functionality as Grave Escape, but with more customization and without bugs on macOS.
 
 ```c
 // Shift + esc = ~

docs/feature_oled_driver.md

@@ -356,6 +356,10 @@ bool oled_scroll_left(void);
 // Returns true if the screen was not scrolling or stops scrolling
 bool oled_scroll_off(void);
 
+// Returns true if the oled is currently scrolling, false if it is
+// not
+bool is_oled_scrolling(void);
+
 // Inverts the display
 // Returns true if the screen was or is inverted
 bool oled_invert(bool invert);

docs/feature_velocikey.md

@@ -13,7 +13,7 @@ EXTRAKEY_ENABLE = yes
 VELOCIKEY_ENABLE = yes
 ```
 
-Then, while using your keyboard, you need to also turn it on with the VLK_TOG keycode, which toggles the feature on and off.
+Then, while using your keyboard, you need to also turn it on with the `VLK_TOG` keycode, which toggles the feature on and off.
 
 The following light effects will all be controlled by Velocikey when it is enabled:
  - RGB Breathing

docs/fr-fr/cli.md

@@ -48,25 +48,6 @@ Nous recherchons des gens pour créer et maintenir un paquet `qmk` pour plus de
 * Installez en utilisant un virtualenv
 * Expliquez à l'utilisateur de définir la variable d'environnement `QMK_Home` pour "check out" les sources du firmware à un autre endroit que `~/qmk_firmware`.
 
-# CLI locale
-
-Si vous ne voulez pas utiliser la CLI globale, il y a une CLI locale empaquetée avec `qmk_firmware`. Vous pouvez le trouver dans `qmk_firmware/bin/qmk`. Vous pouvez lancer la commande `qmk` depuis n'importe quel répertoire et elle fonctionnera toujours sur cette copie de `qmk_firmware`.
-
-**Exemple**:
-
-```
-$ ~/qmk_firmware/bin/qmk hello
-Ψ Hello, World!
-```
-
-## Limitations de la CLI locale
-
-Il y a quelques limitations à la CLI locale comparé à la globale:
-
-* La CLI locale ne supporte pas `qmk setup` ou `qmk clone`
-* La CLI locale n'opère pas sur le même arbre `qmk_firmware`, même si vous avez plusieurs dépôts clonés.
-* La CLI locale ne s'exécute pas dans un virtualenv, donc il y a des risques que des dépendances seront en conflit
-
 # Les commandes CLI
 
 ## `qmk compile`

docs/getting_started_vagrant.md

@@ -24,7 +24,7 @@ The "easy" way to flash the firmware is using a tool from your host OS:
 If you want to program via the command line you can uncomment the ['modifyvm'] lines in the Vagrantfile to enable the USB passthrough into Linux and then program using the command line tools like dfu-util/dfu-programmer or you can install the Teensy CLI version.
 
 ## Vagrantfile Overview
-The development environment is configured to run the QMK Docker image, `qmkfm/base_container`. This not only ensures predictability between systems, it also mirrors the CI environment.
+The development environment is configured to run the QMK Docker image, `qmkfm/qmk_cli`. This not only ensures predictability between systems, it also mirrors the CI environment.
 
 ## FAQ
 

docs/hardware_keyboard_guidelines.md

@@ -144,10 +144,38 @@ The `rules.mk` file can also be placed in a sub-folder, and its reading order is
         * `keyboards/top_folder/sub_1/sub_2/sub_3/sub_4/rules.mk`
           * `keyboards/top_folder/keymaps/a_keymap/rules.mk`
           * `users/a_user_folder/rules.mk`
+        * `keyboards/top_folder/sub_1/sub_2/sub_3/sub_4/post_rules.mk`
+      * `keyboards/top_folder/sub_1/sub_2/sub_3/post_rules.mk`
+    * `keyboards/top_folder/sub_1/sub_2/post_rules.mk`
+  * `keyboards/top_folder/sub_1/post_rules.mk`
+* `keyboards/top_folder/post_rules.mk`
 * `common_features.mk`
 
 Many of the settings written in the `rules.mk` file are interpreted by `common_features.mk`, which sets the necessary source files and compiler options.
 
+The `post_rules.mk` file can interpret `features` of a keyboard-level before `common_features.mk`.  For example, when your designed keyboard has the option to implement backlighting or underglow using rgblight.c, writing the following in the `post_rules.mk` makes it easier for the user to configure the `rules.mk`.
+
+* `keyboards/top_folder/keymaps/a_keymap/rules.mk`
+  ```makefile
+  # Please set the following according to the selection of the hardware implementation option.
+  RGBLED_OPTION_TYPE = backlight   ## none, backlight or underglow
+  ```
+* `keyboards/top_folder/post_rules.mk`
+  ```makefile
+  ifeq ($(filter $(strip $(RGBLED_OPTION_TYPE))x, nonex backlightx underglowx x),)
+     $(error unknown RGBLED_OPTION_TYPE value "$(RGBLED_OPTION_TYPE)")
+  endif
+
+  ifeq ($(strip $(RGBLED_OPTION_TYPE)),backlight)
+    RGBLIGHT_ENABLE = yes
+    OPT_DEFS += -DRGBLED_NUM=30
+  endif
+  ifeq ($(strip $(RGBLED_OPTION_TYPE)),underglow)
+    RGBLIGHT_ENABLE = yes
+    OPT_DEFS += -DRGBLED_NUM=6
+  endif
+  ```
+
 ?> See `build_keyboard.mk` and `common_features.mk` for more details.
 
 ### `<keyboard_name.c>`

docs/ja/getting_started_vagrant.md

@@ -29,7 +29,7 @@ Vagrant 以外に、適切なプロバイダがインストールされ、その
 コマンドラインでプログラムしたい場合は、Vagranfile の ['modifyvm'] 行のコメントを解除して Linux への USB パススルーを有効にし、dfu-util/dfu-programmer のようなコマンドラインツールを使ってプログラムすることができます。あるいは Teensy CLI バージョンをインストールすることができます。
 
 ## Vagrantfile の概要
-開発環境は QMK Docker イメージ、`qmkfm/base_container` を実行するように設定されています。これはシステム間の予測可能性が保証されるだけでなく、CI 環境もミラーされます。
+開発環境は QMK Docker イメージ、`qmkfm/qmk_cli` を実行するように設定されています。これはシステム間の予測可能性が保証されるだけでなく、CI 環境もミラーされます。
 
 ## FAQ
 

docs/reference_glossary.md

@@ -130,7 +130,7 @@ A 1 byte number that is sent as part of a HID report over USB that represents a
 ## Space Cadet Shift
 A special set of shift keys which allow you to type various types of braces by tapping the left or right shift one or more times.
 
-* [Space Cadet Shift Documentation](feature_space_cadet_shift.md)
+* [Space Cadet Shift Documentation](feature_space_cadet.md)
 
 ## Tap
 Pressing and releasing a key. In some situations you will need to distinguish between a key down and a key up event, and Tap always refers to both at once.

drivers/oled/oled_driver.h

@@ -313,6 +313,10 @@ bool oled_scroll_left(void);
 // Returns true if the screen was not scrolling or stops scrolling
 bool oled_scroll_off(void);
 
+// Returns true if the oled is currently scrolling, false if it is
+// not
+bool is_oled_scrolling(void);
+
 // Inverts the display
 // Returns true if the screen was or is inverted
 bool oled_invert(bool invert);

drivers/oled/ssd1306_sh1106.c

@@ -692,6 +692,8 @@ bool oled_scroll_off(void) {
     return !oled_scrolling;
 }
 
+bool is_oled_scrolling(void) { return oled_scrolling; }
+
 bool oled_invert(bool invert) {
     if (!oled_initialized) {
         return oled_inverted;

keyboards/0xc7/61key/61key.c

@@ -0,0 +1,17 @@
+/* Copyright 2021 0xC7
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "61key.h"

keyboards/0xc7/61key/61key.h

@@ -0,0 +1,43 @@
+/* Copyright 2021 0xC7
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If KC_NOt, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define ___ KC_NO
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A,           K3D, \
+    K40, K41, K42,           K45,           K48, K49,      K4B,      K4D  \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, ___, K2D }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, ___, ___, K3D }, \
+    { K40, K41, K42, ___, ___, K45, ___, ___, K48, K49, ___, K4B, ___, K4D }  \
+}

keyboards/0xc7/61key/config.h

@@ -0,0 +1,152 @@
+/*
+Copyright 2021 0xC7
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0xE117
+#define PRODUCT_ID   0x6161
+#define DEVICE_VER   0x0001
+#define MANUFACTURER 0xC7
+#define PRODUCT      61Key
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7 }
+#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, F7, F6, F5, F4, F1, F0 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
+
+//#define LED_NUM_LOCK_PIN B0
+//#define LED_CAPS_LOCK_PIN B1
+//#define LED_SCROLL_LOCK_PIN B2
+//#define LED_COMPOSE_PIN B3
+//#define LED_KANA_PIN B4
+
+//#define BACKLIGHT_PIN B7
+//#define BACKLIGHT_LEVELS 3
+//#define BACKLIGHT_BREATHING
+
+//#define RGB_DI_PIN E2
+//#ifdef RGB_DI_PIN
+//#    define RGBLED_NUM 16
+//#    define RGBLIGHT_HUE_STEP 8
+//#    define RGBLIGHT_SAT_STEP 8
+//#    define RGBLIGHT_VAL_STEP 8
+//#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+//#    define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+//#    define RGBLIGHT_EFFECT_BREATHING
+//#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//#    define RGBLIGHT_EFFECT_SNAKE
+//#    define RGBLIGHT_EFFECT_KNIGHT
+//#    define RGBLIGHT_EFFECT_CHRISTMAS
+//#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//#    define RGBLIGHT_EFFECT_RGB_TEST
+//#    define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+/*==== use exp() and sin() ====*/
+//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+//#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0

keyboards/0xc7/61key/info.json

@@ -0,0 +1,76 @@
+{
+    "keyboard_name": "61Key",
+    "url": "",
+    "maintainer": "0xC7",
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"x": 0, "y": 0},
+                {"x": 1, "y": 0},
+                {"x": 2, "y": 0},
+                {"x": 3, "y": 0},
+                {"x": 4, "y": 0},
+                {"x": 5, "y": 0},
+                {"x": 6, "y": 0},
+                {"x": 7, "y": 0},
+                {"x": 8, "y": 0},
+                {"x": 9, "y": 0},
+                {"x": 10, "y": 0},
+                {"x": 11, "y": 0},
+                {"x": 12, "y": 0},
+                {"x": 13, "y": 0},
+
+                {"x": 0, "y": 1, "w": 1.5},
+                {"x": 1.5, "y": 1},
+                {"x": 2.5, "y": 1},
+                {"x": 3.5, "y": 1},
+                {"x": 4.5, "y": 1},
+                {"x": 5.5, "y": 1},
+                {"x": 6.5, "y": 1},
+                {"x": 7.5, "y": 1},
+                {"x": 8.5, "y": 1},
+                {"x": 9.5, "y": 1},
+                {"x": 10.5, "y": 1},
+                {"x": 11.5, "y": 1},
+                {"x": 12.5, "y": 1},
+                {"x": 13.5, "y": 1, "w": 1.5},
+
+                {"x": 0, "y": 2, "w": 1.75},
+                {"x": 1.75, "y": 2},
+                {"x": 2.75, "y": 2},
+                {"x": 3.75, "y": 2},
+                {"x": 4.75, "y": 2},
+                {"x": 5.75, "y": 2},
+                {"x": 6.75, "y": 2},
+                {"x": 7.75, "y": 2},
+                {"x": 8.75, "y": 2},
+                {"x": 9.75, "y": 2},
+                {"x": 10.75, "y": 2},
+                {"x": 11.75, "y": 2},
+                {"x": 12.75, "y": 2, "w": 1.25},
+
+                {"x": 0, "y": 3, "w": 1.25},
+                {"x": 1.25, "y": 3},
+                {"x": 2.25, "y": 3},
+                {"x": 3.25, "y": 3},
+                {"x": 4.25, "y": 3},
+                {"x": 5.25, "y": 3},
+                {"x": 6.25, "y": 3},
+                {"x": 7.25, "y": 3},
+                {"x": 8.25, "y": 3},
+                {"x": 9.25, "y": 3},
+                {"x": 10.25, "y": 3},
+                {"x": 11.25, "y": 3, "w": 1.75},
+
+                {"x": 0, "y": 4, "w": 1.25},
+                {"x": 1.25, "y": 4, "w": 1.25},
+                {"x": 2.5, "y": 4, "w": 1.25},
+                {"x": 3.75, "y": 4, "w": 6.25},
+                {"x": 10, "y": 4, "w": 1.25},
+                {"x": 11.25, "y": 4, "w": 1.25},
+                {"x": 12.5, "y": 4, "w": 1.25},
+                {"x": 13.75, "y": 4, "w": 1.25}
+            ]
+        }
+    }
+}

keyboards/0xc7/61key/keymaps/default/keymap.c

@@ -0,0 +1,34 @@
+/* Copyright 2021 0xC7
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
+        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+        KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
+        KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_APP, KC_RCTL
+    ),
+    [1] = LAYOUT(
+        KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
+        KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_LOCK, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, C(A(KC_DEL))
+    )
+};

keyboards/0xc7/61key/keymaps/via/keymap.c

@@ -0,0 +1,48 @@
+/* Copyright 2021 0xC7
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
+        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+        KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
+        KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_APP, KC_RCTL
+    ),
+    [1] = LAYOUT(
+        KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
+        KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_LOCK, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, C(A(KC_DEL))
+    ),
+    [2] = LAYOUT(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+    [3] = LAYOUT(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    )
+};

keyboards/0xc7/61key/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/0xc7/61key/readme.md

@@ -0,0 +1,27 @@
+# 61Key
+
+![61Key](https://i.imgur.com/HdE6c6zh.jpeg)
+
+Custom keyboard designed by RealEmanGaming aka 0xC7
+
+* Keyboard Maintainer: [0xC7](https://github.com/RealEmanGaming)
+* Hardware Supported: ATMega32u4
+* Hardware Availability: N/A (private board, might open source)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 61key:default
+
+Flashing example for this keyboard:
+
+    make 61key:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available

keyboards/0xc7/61key/rules.mk

@@ -0,0 +1,25 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = no       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = yes         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+
+LTO_ENABLE = yes
+KEY_LOCK_ENABLE = yes

keyboards/1upkeyboards/1up60hse/1up60hse.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "1up60hse.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/1upkeyboards/1up60rgb/keymaps/default/keymap.c

@@ -18,46 +18,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 };
 
-void matrix_init_user(void) {
-}
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	return true;
-}
-
 void led_set_user(uint8_t usb_led) {
-
-	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-	} else {
-
-	}
-
 	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+		setPinOutput(B2);
+		writePinLow(B2);
 	} else {
-		DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+		setPinInput(B2);
+		writePinLow(B2);
 	}
-
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_KANA)) {
-
-	} else {
-
-	}
-
 }

keyboards/1upkeyboards/1up60rgb/keymaps/iso/keymap.c

@@ -18,46 +18,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 };
 
-void matrix_init_user(void) {
-}
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	return true;
-}
-
 void led_set_user(uint8_t usb_led) {
-
-	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-	} else {
-
-	}
-
 	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+		setPinOutput(B2);
+		writePinLow(B2);
 	} else {
-		DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+		setPinInput(B2);
+		writePinLow(B2);
 	}
-
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_KANA)) {
-
-	} else {
-
-	}
-
 }

keyboards/1upkeyboards/1up60rgb/keymaps/tsangan/keymap.c

@@ -18,46 +18,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 };
 
-void matrix_init_user(void) {
-}
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	return true;
-}
-
 void led_set_user(uint8_t usb_led) {
-
-	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-	} else {
-
-	}
-
 	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+		setPinOutput(B2);
+		writePinLow(B2);
 	} else {
-		DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+		setPinInput(B2);
+		writePinLow(B2);
 	}
-
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_KANA)) {
-
-	} else {
-
-	}
-
 }

keyboards/1upkeyboards/super16/keymaps/default/keymap.c

@@ -23,19 +23,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     RGB_MOD,    KC_1,    KC_U,    KC_P
   ),
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/3w6/rev1/matrix.c

@@ -34,9 +34,7 @@ extern i2c_status_t tca9555_status;
 // All address pins of the tca9555 are connected to the ground
 // | 0  | 1  | 0  | 0  | A2 | A1 | A0 |
 // | 0  | 1  | 0  | 0  | 0  | 0  | 0  |
-#define I2C_ADDR 0b0100000
+#define I2C_ADDR (0b0100000 << 1)
-#define I2C_ADDR_WRITE ((I2C_ADDR << 1) | I2C_WRITE)
-#define I2C_ADDR_READ ((I2C_ADDR << 1) | I2C_READ)
 
 // Register addresses
 #define IODIRA 0x06  // i/o direction register
@@ -64,19 +62,14 @@ uint8_t init_tca9555(void) {
     // - unused  : input  : 1
     // - input   : input  : 1
     // - driving : output : 0
-    tca9555_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT);
+    uint8_t conf[2] = {
-    if (tca9555_status) goto out;
-    tca9555_status = i2c_write(IODIRA, I2C_TIMEOUT);
-    if (tca9555_status) goto out;
         // This means: write on pin 5 of port 0, read on rest
-    tca9555_status = i2c_write(0b11011111, I2C_TIMEOUT);
+        0b11011111,
-    if (tca9555_status) goto out;
         // This means: we will write on pins 0 to 2 on port 1. read rest
-    tca9555_status = i2c_write(0b11111000, I2C_TIMEOUT);
+        0b11111000,
-    if (tca9555_status) goto out;
+    };
+    tca9555_status = i2c_writeReg(I2C_ADDR, IODIRA, conf, 2, I2C_TIMEOUT);
 
-out:
-    i2c_stop();
     return tca9555_status;
 }
 
@@ -193,20 +186,14 @@ static matrix_row_t read_cols(uint8_t row) {
             return 0;
         } else {
             uint8_t data     = 0;
-            uint8_t port0   = 0;
+            uint8_t ports[2] = {0};
-            uint8_t port1   = 0;
+            tca9555_status = i2c_readReg(I2C_ADDR, IREGP0, ports, 2, I2C_TIMEOUT);
-            tca9555_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT);
+            if (tca9555_status) {  // if there was an error
-            if (tca9555_status) goto out;
+                // do nothing
-            tca9555_status = i2c_write(IREGP0, I2C_TIMEOUT);
+                return 0;
-            if (tca9555_status) goto out;
+            } else {
-            tca9555_status = i2c_start(I2C_ADDR_READ, I2C_TIMEOUT);
+                uint8_t port0 = ports[0];
-            if (tca9555_status) goto out;
+                uint8_t port1 = ports[1];
-            tca9555_status = i2c_read_ack(I2C_TIMEOUT);
-            if (tca9555_status < 0) goto out;
-            port0 = (uint8_t)tca9555_status;
-            tca9555_status = i2c_read_nack(I2C_TIMEOUT);
-            if (tca9555_status < 0) goto out;
-            port1 = (uint8_t)tca9555_status;
 
                 // The initial state was all ones and any depressed key at a given column for the currently selected row will have its bit flipped to zero.
                 // The return value is a row as represented in the generic matrix code were the rightmost bits represent the lower columns and zeroes represent non-depressed keys while ones represent depressed keys.
@@ -219,11 +206,10 @@ static matrix_row_t read_cols(uint8_t row) {
                 data = ~(data);
 
                 tca9555_status = I2C_STATUS_SUCCESS;
-        out:
-            i2c_stop();
                 return data;
             }
         }
+    }
 }
 
 static void unselect_rows(void) {
@@ -263,18 +249,10 @@ static void select_row(uint8_t row) {
                 default:                    break;
             }
 
-            tca9555_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT);
+            uint8_t ports[2] = {port0, port1};
-            if (tca9555_status) goto out;
+            tca9555_status = i2c_writeReg(I2C_ADDR, OREGP0, ports, 2, I2C_TIMEOUT);
-            tca9555_status = i2c_write(OREGP0, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
-            tca9555_status = i2c_write(port0, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
-            tca9555_status = i2c_write(port1, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
             // Select the desired row by writing a byte for the entire GPIOB bus where only the bit representing the row we want to select is a zero (write instruction) and every other bit is a one.
             // Note that the row - MATRIX_ROWS_PER_SIDE reflects the fact that being on the right hand, the columns are numbered from MATRIX_ROWS_PER_SIDE to MATRIX_ROWS, but the pins we want to write to are indexed from zero up on the GPIOB bus.
-        out:
-            i2c_stop();
         }
     }
 }

keyboards/3w6/rev2/matrix.c

@@ -34,9 +34,7 @@ extern i2c_status_t tca9555_status;
 // All address pins of the tca9555 are connected to the ground
 // | 0  | 1  | 0  | 0  | A2 | A1 | A0 |
 // | 0  | 1  | 0  | 0  | 0  | 0  | 0  |
-#define I2C_ADDR 0b0100000
+#define I2C_ADDR (0b0100000 << 1)
-#define I2C_ADDR_WRITE ((I2C_ADDR << 1) | I2C_WRITE)
-#define I2C_ADDR_READ ((I2C_ADDR << 1) | I2C_READ)
 
 // Register addresses
 #define IODIRA 0x06  // i/o direction register
@@ -64,19 +62,14 @@ uint8_t init_tca9555(void) {
     // - unused  : input  : 1
     // - input   : input  : 1
     // - driving : output : 0
-    tca9555_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT);
+    uint8_t conf[2] = {
-    if (tca9555_status) goto out;
-    tca9555_status = i2c_write(IODIRA, I2C_TIMEOUT);
-    if (tca9555_status) goto out;
         // This means: read all pins of port 0
-    tca9555_status = i2c_write(0b11111111, I2C_TIMEOUT);
+        0b11111111,
-    if (tca9555_status) goto out;
         // This means: we will write on pins 0 to 3 on port 1. read rest
-    tca9555_status = i2c_write(0b11110000, I2C_TIMEOUT);
+        0b11110000,
-    if (tca9555_status) goto out;
+    };
+    tca9555_status = i2c_writeReg(I2C_ADDR, IODIRA, conf, 2, I2C_TIMEOUT);
 
-out:
-    i2c_stop();
     return tca9555_status;
 }
 
@@ -194,34 +187,27 @@ static matrix_row_t read_cols(uint8_t row) {
         } else {
             uint8_t data    = 0;
             uint8_t port0   = 0;
-            tca9555_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT);
+            tca9555_status  = i2c_readReg(I2C_ADDR, IREGP0, &port0, 1, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
+            if (tca9555_status) {  // if there was an error
-            tca9555_status = i2c_write(IREGP0, I2C_TIMEOUT);
+                // do nothing
-            if (tca9555_status) goto out;
+                return 0;
-            tca9555_status = i2c_start(I2C_ADDR_READ, I2C_TIMEOUT);
+            } else {
-            if (tca9555_status) goto out;
+                port0 = ~port0;
-            tca9555_status = i2c_read_nack(I2C_TIMEOUT);
-            if (tca9555_status < 0) goto out;
-            
-            port0 = ~(uint8_t)tca9555_status;
-
                 // We read all the pins on GPIOA.
                 // The initial state was all ones and any depressed key at a given column for the currently selected row will have its bit flipped to zero.
                 // The return value is a row as represented in the generic matrix code were the rightmost bits represent the lower columns and zeroes represent non-depressed keys while ones represent depressed keys.
                 // the pins connected to eact columns are sequential, but in reverse order, and counting from zero down (col 5 -> GPIO04, col6  -> GPIO03 and so on).
-            data |= ( port0 & 0x01 ) << 4; 
+                data |= (port0 & 0x01) << 4;
-            data |= ( port0 & 0x02 ) << 2; 
+                data |= (port0 & 0x02) << 2;
-            data |= ( port0 & 0x04 ); 
+                data |= (port0 & 0x04);
-            data |= ( port0 & 0x08 ) >> 2; 
+                data |= (port0 & 0x08) >> 2;
-            data |= ( port0 & 0x10 ) >> 4; 
+                data |= (port0 & 0x10) >> 4;
 
                 tca9555_status = I2C_STATUS_SUCCESS;
-        out:
-            i2c_stop();
-
                 return data;
             }
         }
+    }
 }
 
 static void unselect_rows(void) {
@@ -256,20 +242,15 @@ static void select_row(uint8_t row) {
                 case 4: port1 &= ~(1 << 0); break;
                 case 5: port1 &= ~(1 << 1); break;
                 case 6: port1 &= ~(1 << 2); break;
-                case 7: port1 &= ~(1 << 3); break;
+                case 7:
+                    port1 &= ~(1 << 3);
+                    break;
                 default:                    break;
             }
 
+            tca9555_status = i2c_writeReg(I2C_ADDR, OREGP1, &port1, 1, I2C_TIMEOUT);
             // Select the desired row by writing a byte for the entire GPIOB bus where only the bit representing the row we want to select is a zero (write instruction) and every other bit is a one.
             // Note that the row - MATRIX_ROWS_PER_SIDE reflects the fact that being on the right hand, the columns are numbered from MATRIX_ROWS_PER_SIDE to MATRIX_ROWS, but the pins we want to write to are indexed from zero up on the GPIOB bus.
-            tca9555_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
-            tca9555_status = i2c_write(OREGP1, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
-            tca9555_status = i2c_write(port1, I2C_TIMEOUT);
-            if (tca9555_status) goto out;
-        out:
-            i2c_stop();
         }
     }
 }

keyboards/40percentclub/25/25.c

@@ -15,33 +15,6 @@
  */
 #include "25.h"
 
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}
-
 #ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {

keyboards/40percentclub/25/keymaps/default/keymap.c

@@ -70,18 +70,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
   ),
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/40percentclub/25/keymaps/macro/keymap.c

@@ -24,19 +24,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_LCTL,  KC_LGUI, KC_LALT, KC_SPC,  KC_SPC \
   ),
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/40percentclub/4pack/4pack.c

@@ -29,26 +29,3 @@ void matrix_init_kb(void) {
   // Do the rest
   matrix_init_user();
 }
-
-/*
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/

keyboards/40percentclub/4pack/keymaps/default/keymap.c

@@ -21,6 +21,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_A, KC_S, KC_D, KC_F
     ),
 };
-
-
-void matrix_init_user(void) { }

keyboards/40percentclub/4x4/4x4.c

@@ -1,29 +1 @@
-
 #include "4x4.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/40percentclub/4x4/keymaps/default/keymap.c

@@ -86,19 +86,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ),
 
 };
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/40percentclub/5x5/5x5.c

@@ -1,29 +1 @@
-
 #include "5x5.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/40percentclub/5x5/keymaps/default/keymap.c

@@ -98,20 +98,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ),
 
 };
-
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/40percentclub/6lit/6lit.c

@@ -15,33 +15,6 @@
  */
 #include "6lit.h"
 
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}
-
 #ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {

keyboards/40percentclub/6lit/keymaps/default/keymap.c

@@ -21,19 +21,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_F19,   KC_F20,   KC_F21,   KC_F22,   KC_F23,   KC_F24  \
   ),
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/40percentclub/6lit/keymaps/macro/keymap.c

@@ -21,19 +21,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_F22,   KC_F23,   KC_F24  \
   ),
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/40percentclub/foobar/foobar.c

@@ -15,33 +15,6 @@
  */
 #include "foobar.h"
 
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}
-
 #ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {

keyboards/40percentclub/foobar/keymaps/default/keymap.c

@@ -73,19 +73,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     _______, _______, _______, _______, _______, RESET,   _______, _______, _______, _______
   ),
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/40percentclub/foobar/keymaps/macro/keymap.c

@@ -22,19 +22,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_F21,   KC_F22,   KC_F23,   KC_F14,   KC_INT5  \
   ),
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/40percentclub/half_n_half/half_n_half.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "half_n_half.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/40percentclub/half_n_half/keymaps/default/keymap.c

@@ -51,15 +51,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   }
   return true;
 }
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/40percentclub/i75/i75.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "i75.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/40percentclub/i75/keymaps/default/keymap.c

@@ -52,15 +52,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   }
   return true;
 }
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/40percentclub/mf68/mf68.c

@@ -1,8 +1 @@
 #include "mf68.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}

keyboards/40percentclub/nano/nano.c

@@ -1,5 +1 @@
 #include "nano.h"
-
-void matrix_init_kb(void) {
-	matrix_init_user();
-}

keyboards/40percentclub/nori/keymaps/macro/keymap.c

@@ -23,19 +23,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_F21,   KC_F22,   KC_F23,   KC_F24   \
   ),
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/40percentclub/nori/nori.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "nori.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/40percentclub/tomato/keymaps/default/keymap.c

@@ -97,47 +97,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     , _______,_______,_______,_______,RESET,  _______,_______,_______,_______,_______
     ),
 };
-
-void matrix_init_user(void) {
-}
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_KANA)) {
-
-	} else {
-
-	}
-
-}

keyboards/40percentclub/ut47/ut47.c

@@ -18,20 +18,6 @@
   #include "protocol/serial.h"
 #endif
 
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
 bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
 	// put your per-action keyboard code here
 	// runs for every action, just before processing by the firmware
@@ -42,9 +28,3 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
   }
 	return process_record_user(keycode, record);
 }
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/6ball/6ball.c

@@ -1,5 +1 @@
 #include "6ball.h"
-
-void matrix_init_kb(void) {
-	matrix_init_user();
-}

keyboards/6ball/6ball.h

@@ -1,14 +1,10 @@
-#ifndef SIXBALL_H
+#pragma once
-#define SIXBALL_H
 
 #include "quantum.h"
 
 #define LAYOUT( \
-      k01, k02, k03, \
+    k05, k00, k01, \
-      k04, k05, k06 \
+    k04, k03, k02 \
-) \
+) { \
-{ \
+    { k00, k01, k02, k03, k04, k05 } \
-    { k02, k03, k06, k05, k04, k01 } \
 }
-
-#endif

keyboards/6ball/config.h

@@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
+#pragma once
-#define CONFIG_H
 
 #include "config_common.h"
 
@@ -46,5 +45,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 
 #define TAPPING_TERM 200
-
-#endif

keyboards/9key/9key.c

@@ -1,5 +1 @@
 #include "9key.h"
-
-void matrix_init_kb(void) {
-	matrix_init_user();
-}

keyboards/9key/9key.h

@@ -1,5 +1,4 @@
-#ifndef NINEKEY_H
+#pragma once
-#define NINEKEY_H
 
 #include "quantum.h"
 
@@ -7,11 +6,8 @@
     k00, k01, k02, \
     k10, k11, k12, \
     k20, k21, k22 \
-) \
+) { \
-{ \
     { k00, k01, k02 }, \
     { k10, k11, k12 }, \
     { k20, k21, k22 } \
 }
-
-#endif

keyboards/9key/config.h

@@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
+#pragma once
-#define CONFIG_H
 
 #include "config_common.h"
 
@@ -45,5 +44,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 
 #define TAPPING_TERM 200
-
-#endif

keyboards/abstract/ellipse/keymaps/abstractkb/keymap.c

@@ -27,22 +27,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   )
 };
 
-/*bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}*/
-
-/*void matrix_init_user(void) {
-
-}*/
-
-/*void matrix_scan_user(void) {
-
-}*/
-
-/*void led_set_user(uint8_t usb_led) {
-
-}*/
-
 bool encoder_update_user(uint8_t index, bool clockwise) {
 	if (index == 0) { /* First encoder */
 		if (clockwise) {

keyboards/abstract/ellipse/keymaps/default/keymap.c

@@ -27,22 +27,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   )
 };
 
-/*bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}*/
-
-/*void matrix_init_user(void) {
-
-}*/
-
-/*void matrix_scan_user(void) {
-
-}*/
-
-/*void led_set_user(uint8_t usb_led) {
-
-}*/
-
 bool encoder_update_user(uint8_t index, bool clockwise) {
 	if (index == 0) { /* First encoder */
 		if (clockwise) {

keyboards/abstract/ellipse/rev1/rev1.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "rev1.h"
-
-/*void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}*/

keyboards/acheron/shark/shark.c

@@ -14,38 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "shark.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/

keyboards/adkb96/rev1/rev1.c

@@ -1,15 +1 @@
 #include "adkb96.h"
-
-void matrix_init_kb(void) {
-
-    // // green led on
-    // DDRD |= (1<<5);
-    // PORTD &= ~(1<<5);
-
-    // // orange led on
-    // DDRB |= (1<<0);
-    // PORTB &= ~(1<<0);
-
-	matrix_init_user();
-};
-

keyboards/ai03/lunar/keymaps/default/keymap.c

@@ -76,15 +76,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   }
   return true;
 }
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/ai03/lunar/lunar.c

@@ -14,9 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "lunar.h"
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/ai03/orbit/keymaps/default/keymap.c

@@ -72,20 +72,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   }
   return true;
 }
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}
-
-layer_state_t layer_state_set_user(layer_state_t state) {
-		
-	return state;
-}

keyboards/ai03/orbit/orbit.c

@@ -172,20 +172,6 @@ void matrix_init_kb(void) {
 	matrix_init_user();
 }
 
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
 void led_set_kb(uint8_t usb_led) {
 	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
 	
@@ -222,5 +208,3 @@ uint32_t layer_state_set_kb(uint32_t state) {
 	
 	return layer_state_set_user(state);
 }
-
-

keyboards/ai03/orbit/orbit.h

@@ -13,8 +13,8 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#ifndef ORBIT_H
+
-#define ORBIT_H
+#pragma once
 
 #include "quantum.h"
 
@@ -35,6 +35,7 @@
 #endif
 #endif
 
+#define XXX KC_NO
 
 #define LAYOUT( \
     L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
@@ -42,22 +43,19 @@
     L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
     L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36, \
          L41, L42, L43, L44, L45, L46, R40, R41, R42, R43, R44, R45 \
-) \
+) { \
-{ \
     { L00, L01, L02, L03, L04, L05, L06 }, \
     { L10, L11, L12, L13, L14, L15, L16 }, \
     { L20, L21, L22, L23, L24, L25, L26 }, \
     { L30, L31, L32, L33, L34, L35, L36 }, \
-	{ KC_NO, L41,   L42,   L43,   L44,   L45,   L46 }, \
+    { XXX, L41, L42, L43, L44, L45, L46 }, \
     { R00, R01, R02, R03, R04, R05, R06 }, \
     { R10, R11, R12, R13, R14, R15, R16 }, \
     { R20, R21, R22, R23, R24, R25, R26 }, \
     { R30, R31, R32, R33, R34, R35, R36 }, \
-	{ R40,   R41,   R42,   R43,   R44,   R45, KC_NO }  \
+    { R40, R41, R42, R43, R44, R45, XXX } \
 }
 
 extern void led_toggle(int id, bool on);
 void set_all_leds(bool leds[6]);
 extern void set_layer_indicators(uint8_t layer);
-
-#endif

keyboards/ai03/quasar/keymaps/default/keymap.c

@@ -43,19 +43,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	_______,          _______,                                     _______,                                     _______,          _______,    _______, _______, _______  
   )
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/ai03/quasar/quasar.c

@@ -14,38 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "quasar.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/

keyboards/ai03/soyuz/keymaps/default/keymap.c

@@ -24,19 +24,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	KC_P0,   KC_P0,   KC_PDOT, KC_PENT  \
   )
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/ai03/soyuz/soyuz.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "soyuz.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/akb/eb46/eb46.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "eb46.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/alf/dc60/dc60.h

@@ -13,11 +13,13 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#ifndef DC60_H
+
-#define DC60_H
+#pragma once
 
 #include "quantum.h"
 
+#define XXX KC_NO
+
 // This a shortcut to help you visually see your layout.
 // The following is an example using the Planck MIT layout
 // The first section contains all of the arguments representing the physical
@@ -25,18 +27,15 @@
 // The second converts the arguments into a two-dimensional array which
 // represents the switch matrix.
 #define LAYOUT_all( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, KOD, KOE, \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \
-    K10,      K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
-    K20,      K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, \
-    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \
-    K40,      K42, K43,      K45,      K47, K48,      K4A, K4B, K4C, K4D, K4E  \
+    k40,      k42, k43,      k45,      k47, k48,      k4A, k4B, k4C, k4D, k4E \
-) \
+) { \
-{ \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \
-    { K00, K01,   K02, K03, K04,   K05, K06,   K07, K08, K09,   K0A, K0B, K0C, KOD, KOE },   \
+    { k10, XXX, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \
-    { K10, KC_NO, K12, K13, K14,   K15, K16,   K17, K18, K19,   K1A, K1B, K1C, K1D, K1E },   \
+    { k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, XXX }, \
-    { K20, KC_NO, K22, K23, K24,   K25, K26,   K27, K28, K29,   K2A, K2B, K2C, K2D, KC_NO }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \
-    { K30, K31,   K32, K33, K34,   K35, K36,   K37, K38, K39,   K3A, K3B, K3C, K3D, K3E },   \
+    { k40, XXX, k42, k43, XXX, k45, XXX, k47, k48, XXX, k4A, k4B, k4C, k4D, k4E } \
-    { K40, KC_NO, K42, K43, KC_NO, K45, KC_NO, K47, K48, KC_NO, K4A, K4B, K4C, K4D, K4E },   \
 }
-
-#endif

keyboards/alf/dc60/keymaps/default/keymap.c

@@ -32,19 +32,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                  KC_TRNS, KC_TRNS, KC_TRNS
       ),
 };
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/alf/x2/config.h

@@ -1,5 +1,4 @@
-#ifndef CONFIG_H
+#pragma once
-#define CONFIG_H
 
 #include "config_common.h"
 
@@ -45,5 +44,3 @@
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
 #endif
-
-#endif

keyboards/alf/x2/keymaps/default/keymap.c

@@ -19,20 +19,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
 };
 
-void matrix_init_user(void) {
-}
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
 void led_set_user(uint8_t usb_led) {
   if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-    DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+    setPinOutput(B2);
+    writePinLow(B2);
   } else {
-    DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+    setPinInput(B2);
+    writePinLow(B2);
   }
 }

keyboards/alf/x2/x2.h

@@ -1,98 +1,97 @@
-#ifndef X2_H
+#pragma once
-#define X2_H
 
 #include "quantum.h"
 
-// K404 and K408 are the microswitches at the top of the PCB
+#define XXX KC_NO
+
+// k44 and k48 are the microswitches at the top of the PCB
 
 #define LAYOUT( \
-	                        K404,                   K408,                                     \
+                        k44,                k48, \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, \
-	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \
-	K400, K401,       K403,             K406,                   K410, K411, K412, K413, K414  \
+    k40, k41,      k43,           k46,                k4A, k4B, k4C, k4D, k4E \
 ) { \
-	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 },  \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \
-	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 },  \
+    { k10, XXX, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \
-	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
+    { k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, XXX }, \
-	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  K314 },  \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \
-	{ K400,  K401,  KC_NO, K403,  K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  K412,  K413,  K414 }   \
+    { k40, k41, XXX, k43, k44, XXX, k46, XXX, k48, XXX, k4A, k4B, k4C, k4D, k4E } \
 }
 
 #define LAYOUT_std_ansi( \
-							K404,                   K408,                                     \
+                        k44,                k48, \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,       K014, \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C,      k0E, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, \
-	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313,       \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B,      k3D, \
-	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
+    k40, k41,      k43,           k46,                k4A, k4B,      k4D, k4E \
 ) { \
-	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  KC_NO, K014 },  \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, XXX, k0E }, \
-	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 },  \
+    { k10, XXX, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \
-	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
+    { k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, XXX }, \
-	{ K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  KC_NO }, \
+    { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, XXX, k3D, XXX }, \
-	{ K400,  K401,  KC_NO, K403,  K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  KC_NO, K413,  K414 }   \
+    { k40, k41, XXX, k43, k44, XXX, k46, XXX, k48, XXX, k4A, k4B, XXX, k4D, k4E } \
 }
 
 #define LAYOUT_std_splits( \
-							K404,					K408,								      \
+                        k44,                k48, \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, \
-	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B,      k3D, k3E, \
-	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
+    k40, k41,      k43,           k46,                k4A, k4B,      k4D, k4E \
 ) { \
-	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 },  \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \
-	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 },  \
+    { k10, XXX, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \
-	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
+    { k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, XXX }, \
-	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  K314 },  \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, XXX, k3D, k3E }, \
-	{ K400,  K401,  KC_NO, K403,  K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  KC_NO, K413,  K414 }   \
+    { k40, k41, XXX, k43, k44, XXX, k46, XXX, k48, XXX, k4A, k4B, XXX, k4D, k4E } \
 }
 
 #define LAYOUT_hhkb( \
-							K404,					K408,								      \
+                        k44,                k48, \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, \
-	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B,      k3D, k3E, \
-	      K401,       K403,             K406,                   K410, K411                    \
+         k41,      k43,           k46,                k4A, k4B \
 ) { \
-	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 },  \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \
-	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 },  \
+    { k10, XXX, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \
-	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
+    { k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, XXX }, \
-	{ K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  K314 },  \
+    { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, XXX, k3D, k3E }, \
-	{ KC_NO, K401,  KC_NO, K403,  K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  KC_NO, KC_NO, KC_NO }  \
+    { XXX, k41, XXX, k43, k44, XXX, k46, XXX, k48, XXX, k4A, k4B, XXX, XXX, XXX } \
 }
 
 #define LAYOUT_2u_split_arrows( \
-							K404,					K408,								      \
+                        k44,                k48, \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, \
-	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \
-	K400, K401,       K403,             K406,                   K410, K411, K412, K413, K414  \
+    k40, k41,      k43,           k46,                k4A, k4B, k4C, k4D, k4E \
 ) { \
-	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012, K013,  K014 },  \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \
-	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112, K113,  K114 },  \
+    { k10, XXX, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \
-	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212, K213,  KC_NO }, \
+    { k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, XXX }, \
-	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312, K313,  K314 },  \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \
-	{ K400,  K401,  KC_NO, K403,  K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  K412, K413,  K414 }   \
+    { k40, k41, XXX, k43, k44, XXX, k46, XXX, k48, XXX, k4A, k4B, k4C, k4D, k4E } \
 }
 
 #define LAYOUT_split_arrows( \
-							K404,					K408,									  \
+                        k44,                k48, \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, \
-	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B,      k3D, k3E, \
-	K400, K401,       K403,             K406,                   K410, K411, K412, K413, K414  \
+    k40, k41,      k43,           k46,                k4A, k4B, k4C, k4D, k4E \
 ) { \
-	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 },  \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \
-	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 },  \
+    { k10, XXX, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \
-	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
+    { k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, XXX }, \
-	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  K314 },  \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, XXX, k3D, k3E }, \
-	{ K400,  K401,  KC_NO, K403,  K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  K412,  K413,  K414 }   \
+    { k40, k41, XXX, k43, k44, XXX, k46, XXX, k48, XXX, k4A, k4B, k4C, k4D, k4E } \
 }
-
-#endif

keyboards/alpha/alpha.h

@@ -1,16 +1,15 @@
-#ifndef KB_H
+#pragma once
-#define KB_H
 
 #include "quantum.h"
 
-#define LAYOUT( \
+#define XXX KC_NO
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, \
-	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, \
-	K200, K201, K202, K203,       K205,       K207, K208, K209  \
-) { \
-	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009 }, \
-	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109 }, \
-	{ K200,  K201,  K202,  K203,  KC_NO, K205,  KC_NO, K207,  K208,  K209 }  \
-}
 
-#endif
+#define LAYOUT( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, \
+    k20, k21, k22, k23,      k25,      k27, k28, k29 \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19 }, \
+    { k20, k21, k22, k23, XXX, k25, XXX, k27, k28, k29 } \
+}

keyboards/alpha/config.h

@@ -1,5 +1,4 @@
-#ifndef CONFIG_H
+#pragma once
-#define CONFIG_H
 
 #include "config_common.h"
 
@@ -45,5 +44,3 @@
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
 #endif
-
-#endif