phase: 02_tls_control_channel

**Verified / implemented (phase 02 final pass)**
- All 6 tasks already in `complete/` → verification pass. Device measurement **found a real defect (README bug 11)**: the cert carried its SAN *value* under the OID written from the ASCII text `"2.5.29.17"` instead of DER content bytes `55 1D 11` (`openssl x509 -text` showed `1.10.46.53…`, hex `30 2f 06 09 32 2e 35…`), i.e. **no SAN** → hostname validation impossible while every host check stayed green (they walked the value, never the label).
- Fixed in the pure module: `kSanOidTlv`/`sanOidDer()`, `sanExtensionFullDer()` (pinned to the 43 bytes OpenSSL writes for these names), `derCarriesSan()` (OID *and* value); `tls.cpp` uses them + 3 `static_assert`s; `cert` now warns and names the remedy. 33 new checks in `test_tls_pem.cpp`, incl. the pre-fix extension byte-for-byte (`derContains` yes / `derCarriesSan` no).
- Corrected a false finding: the earlier "fingerprint rotated once" was an **OpenSSL `-ext` artifact** (`C8:76…` vs the real `61:54:19:30…`, same DER). Re-measured: serial `cert` == live handshake DER hash; page 51 626 B, `sha256 dd16e195…f04e9` == locally assembled page.

**Tests / lint (100 % green)**
- `bash .agents/validate.sh` → **GATE_EXIT=0**: `RESULT: all suites passed` in the plain *and* `SANITIZE=1` run, **4826 checks / 0 failures** each; `bridge`/`console`/`rollback` **SUCCESS**; `page bytes: 51626`; `README/AGENTS claims: OK`; `repo hygiene: OK (71 tracked files)`.
- Footprint: bridge **RAM 30.4 % (99 616 B) / Flash 39.6 % (1 246 145 B)** vs baseline 26.7 %/87 592 & 36.1 %/1 135 293 → **+12 024 B RAM / +110 852 B flash**; TLS alone +6 160 B / +100 008 B (rollback image byte-identical); session heap 187 936 → ~145.5 k (1 session) → ~107.9 k (2).
- `ruff check --select F,E9 tools/ tests/` → All checks passed; `bash -n` clean (gate, runner, probe); `-Wall -Wextra` warning-free.

**Completion criteria**: 1 ✓ (gate green + RAM/Flash + session heap quoted); 2 ✓ as recorded (boot prints no fingerprint on the NVS-load path, `cert` prints on demand, identity survived reflashes, nothing about the key is printed anywhere — `nvs erase`→first-boot leg **not re-run**); 3 ✓ re-measured (51 626 == gate; `:80` → 301, no page bytes); 4 partial — 426/401/404 + pinning handshake measured, but arming/typing needs the operator's passphrase (`dflt:0`) and the target is this machine, so no input was sent; 5 ✓ (no `.pem/.key/.crt` tracked or on disk; hygiene block ran); 6 ✓ (`[env:rollback]` built every run + README section); 7 ✓.

**Documentation**: README — check count 4793→4826 (intro + Quick start), `test_tls_pem` 829→862 with new pins, footprint/TLS-cost rows re-measured, "Ten bugs"→"Eleven bugs" + new entry + both anchors, `cert` row, Troubleshooting names-warning row, `tls_pem.h` architecture entry, nine/ten pure-module wording. AGENTS.md (staleness only): "Ten bugs"→"Eleven bugs" ×2, 4826, and the certificate-names row extended with the DER-OID rule. `.agents/HW_VERIFICATION.md` — 426 body/headers re-measured, fingerprint row correction + `-ext` rule, new SAN row (`failed → fixed in tree, device leg needs nvs erase`) with closing commands; phase report written to `.agents/reports/02_tls_control_channel/02_tls_control_channel__00_phase.a1.md`.

**Deviations / live-infra**: made **no** reflash and **no** `nvs erase` (erase also destroys the token and Wi-Fi credentials; flashing puts a live HID keyboard into ROM download mode on this machine). Live steps were read-only `curl`/`openssl` plus one capped `console.py cert` (opening the CDC resets the board — permitted, recorded). No phase/PLAN files touched; everything left in the working tree for the harness to commit.

**Next pending phase**: `03_session_takeover` — `01_pending_claim_socket.md`.

tests/run_tests.sh

@@ -4,10 +4,12 @@
 #   tests/run_tests.sh          build and run every suite
 #   tests/run_tests.sh clean    remove the build directory
 #
-# The modules under test (src/keystate.h, src/proto.h, src/text.h, src/mouse.h,
-# src/output.h, src/ws_codec.h, src/sha1.h) have no Arduino or ESP-IDF dependency by
-# design, so the exact code that runs on the board is compiled and exercised here before
-# anything is flashed.
+# The modules under test (src/keystate.h, src/proto.h, src/status.h, src/text.h,
+# src/mouse.h, src/output.h, src/ws_codec.h, src/sha1.h, src/tls_pem.h, and the pure
+# policy halves of src/tls_session.h and src/conn.h) have no Arduino or
+# ESP-IDF
+# dependency by design, so the exact code that runs on the board is compiled and
+# exercised here before anything is flashed.
 #
 # A C++ compiler is not always installed on a workstation, so the runner picks one:
 #   $CXX                        if you set it, it wins
@@ -33,7 +35,8 @@ images=(
     "docker.io/library/gcc:14"
 )
 
-suites=(test_keystate test_proto test_text test_mouse test_output test_ws_codec)
+suites=(test_keystate test_proto test_text test_mouse test_output test_ws_codec
+        test_tls_pem test_tls_session test_conn)
 
 build_and_run() {
     local cxx="$1"